1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2018/01/27 15:14:08 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=\r, cud1=\n, ind=\n,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
314 kcud1=\n, nel=\r\n, .kbs=^H,
318 bel=^G, cr=\r, cud1=\n, ind=\n,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=\n, bel=^G, cud1=\n,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
337 ansi+local1|ANSI normal-mode cursor-keys,
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
339 ansi+local|ANSI normal-mode parameterized cursor-keys,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
342 ansi+tabs|ANSI tab-stops,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
344 ansi+inittabs|ANSI initial tab-stops,
346 ansi+erase|ANSI clear screen/line,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
348 ansi+rca|ANSI relative cursor-addressing,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
350 ansi+cup|ANSI absolute cursor-addressing,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
352 ansi+rep|ANSI repeat-character,
353 rep=%p1%c\E[%p2%{1}%-%db,
354 ansi+idl1|ANSI insert/delete one line,
356 ansi+idl|ANSI insert/delete lines,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
358 ansi+idc1|ANSI insert/delete one character,
359 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
360 ansi+idc|ANSI insert/delete characters,
361 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
362 ansi+arrows|ANSI normal-mode cursor-keys,
363 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
365 ansi+sgr|ANSI graphic renditions,
366 blink=\E[5m, invis=\E[8m, rev=\E[7m,
367 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
369 ansi+sgrso|ANSI standout only,
370 rmso=\E[m, smso=\E[7m,
371 ansi+sgrul|ansi underline only,
372 rmul=\E[m, smul=\E[4m,
373 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
375 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
377 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
378 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
380 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
382 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
383 ansi+csr|ANSI scroll-region plus cursor save & restore,
384 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
386 # The normal (ANSI) flavor of "media copy" building block asserts that
387 # characters sent to the printer do not echo on the screen. DEC terminals
388 # can also be put into autoprinter mode, where each line is sent to the
389 # printer as you move off that line, e.g., by a carriage return.
390 ansi+pp|ansi printer port,
392 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
393 dec+pp|DEC autoprinter mode,
394 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
396 # The IBM PC alternate character set. Plug this into any Intel console entry.
397 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
398 # ROM graphics for control characters such as the diamond, up- and down-arrow.
399 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
400 # will work with any Intel console, they all seem to have inherited \E[11m
401 # from the ANSI.SYS de-facto standard.
402 klone+acs|alternate character set for ansi.sys displays,
403 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
404 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
405 \301w\302x\263y\363z\362{\343|\330}\234~\376,
406 rmacs=\E[10m, smacs=\E[11m,
408 # Highlight controls corresponding to the ANSI.SYS standard. Most
409 # console drivers for Intel boxes obey these. Makes the same assumption
410 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
411 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
412 klone+sgr|attribute control for ansi.sys displays,
413 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
414 rmso=\E[m, rmul=\E[m,
415 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
417 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
420 # Most Intel boxes do not treat "invis" (invisible) text.
421 klone+sgr8|attribute control for ansi.sys displays,
423 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
424 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
427 # Highlight controls corresponding to the ANSI.SYS standard. *All*
428 # console drivers for Intel boxes obey these. Does not assume \E[11m will
429 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
430 # diamond and arrow characters under curses.
431 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
432 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
434 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
435 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
436 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
439 # KOI8-R (RFC1489) acs (alternate character set)
440 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
441 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
442 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
443 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
444 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
446 rmacs=\E[10m, smacs=\E[11m,
448 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
449 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
450 # but equivalent strings that don't rely on that coincidence:
451 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
452 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
453 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
454 # They match a subset of ECMA-48.
455 klone+color|color control for ansi.sys and ISO6429-compatible displays,
456 colors#8, ncv#3, pairs#64,
457 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
459 # This is better than klone+color, it doesn't assume white-on-black as the
460 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
461 ecma+color|color control for ECMA-48-compatible terminals,
463 colors#8, ncv#3, pairs#64,
464 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
466 ecma+italics|ECMA-48 italics,
467 ritm=\E[23m, sitm=\E[3m,
469 # Attribute control for ECMA-48-compatible terminals
470 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
471 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
473 ecma+strikeout|ECMA-48 strikeout/crossed-out,
474 rmxx=\E[29m, smxx=\E[9m,
476 # For comparison, here are all the capabilities implied by the Intel
477 # Binary Compatibility Standard (level 2) that fit within terminfo.
478 # For more detail on this rather pathetic standard, see the comments
479 # near the end of this file.
480 ibcs2|Intel Binary Compatibility Standard prescriptions,
481 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
482 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
483 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
484 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
485 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
486 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
487 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
490 #### ANSI/ECMA-48 terminals and terminal emulators
492 # See near the end of this file for details on ANSI conformance.
493 # Don't mess with these entries! Lots of other entries depend on them!
495 # This section lists entries in a least-capable to most-capable order.
496 # if you're in doubt about what `ANSI' matches yours, try them in that
497 # order and back off from the first that breaks.
499 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
500 # and more than one page of memory. It uses local motions instead of
501 # direct cursor addressing, and makes almost no assumptions. It does
502 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
503 ansi-mr|mem rel cup ansi,
505 cols#80, lines#24, use=vanilla, use=ansi+erase,
508 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
509 # beware of screen size problems and memory relative cursor addressing.
510 ansi-mini|any ansi terminal with pessimistic assumptions,
512 cols#80, lines#24, use=vanilla, use=ansi+cup,
515 # ansi-mtabs adds relative addressing and minimal tab support
516 ansi-mtabs|any ansi terminal with pessimistic assumptions,
518 ht=^I, use=ansi-mini, use=ansi+local1,
520 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
522 # The following is an entry for the full ANSI 3.64 (1977). It lacks
523 # padding, but most terminals using the standard are "fast" enough
524 # not to require any -- even at 9600 bps. If you encounter problems,
525 # try including the padding specifications.
527 # Note: the :as: and :ae: specifications are not implemented here, for
528 # the available termcap documentation does not make clear WHICH alternate
529 # character set to specify. ANSI 3.64 seems to make allowances for several.
530 # Please make the appropriate adjustments to fit your needs -- that is
531 # if you will be using alternate character sets.
533 # There are very few terminals running the full ANSI 3.64 standard,
534 # so I could only test this entry on one verified terminal (Visual 102).
535 # I would appreciate the results on other terminals sent to me.
537 # Please report comments, changes, and problems to:
539 # U.S. MAIL: Hugh Hansard
542 # Atlanta, GA. 30322.
544 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
546 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
547 ansi77|ansi 3.64 standard 1977 version,
549 cols#80, it#8, lines#24,
550 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
551 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
552 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
553 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
554 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
555 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
556 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
557 smso=\E[7m, smul=\E[4m,
559 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
560 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
561 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
562 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
563 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
564 # to confuse many emulators. On the other hand, we can count on these programs
565 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
566 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
567 # ANSI.SYS influence.
568 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
569 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
571 cols#80, it#8, lines#24,
572 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
573 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
574 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
575 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
576 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
578 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
579 lines#25, use=pcansi-m,
580 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
581 lines#33, use=pcansi-m,
582 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
583 lines#43, use=pcansi-m,
584 # The color versions. All PC emulators do color...
585 pcansi|ibm-pc terminal programs claiming to be ansi,
586 use=klone+color, use=pcansi-m,
587 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
588 lines#25, use=pcansi,
589 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
590 lines#33, use=pcansi,
591 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
592 lines#43, use=pcansi,
594 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
595 # If you want pound signs rather than dollars, replace `B' with `A'
596 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
597 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
598 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
600 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
601 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
602 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
603 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
604 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
605 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
606 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
607 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
608 vpa=\E[%i%p1%dd, use=pcansi-m,
610 ansi+enq|ncurses extension for ANSI ENQ,
611 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
614 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
615 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
616 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
617 ansi|ansi/pc-term compatible with color,
618 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
620 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
621 # all the normal ANSI stuff with no extensions. It assumes
622 # insert/delete line/char is there, so it won't work with
623 # vt100 clones. It assumes video attributes for bold, blink,
624 # underline, and reverse, which won't matter much if the terminal
625 # can't do some of those. Padding is assumed to be zero, which
626 # shouldn't hurt since xon/xoff is assumed.
627 ansi-generic|ansiterm|generic ansi standard terminal,
629 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
630 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
631 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
632 use=ansi+sgrbold, use=ansi+arrows,
634 #### DOS ANSI.SYS variants
636 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
637 # documentation (except for the keyboard key reassignment feature, which
638 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
639 # though undocumented. The <pfkey> capability is untested but should work for
640 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
641 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
642 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
643 OTbs, am, mir, msgr, xon,
645 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
646 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
647 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
648 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
649 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
650 u7=\E[6n, use=klone+color, use=klone+sgr8,
652 # Keypad: Home=\0G Up=\0H PrPag=\0I
653 # ka1,kh kcuu1 kpp,ka3
655 # Left=\0K 5=\0L Right=\0M
658 # End=\0O Down=\0P NxPag=\0Q
659 # kc1,kend kcud1 kc3,knp
664 # On keyboard with 12 function keys,
665 # shifted f-keys: F13-F24
666 # control f-keys: F25-F36
667 # alt f-keys: F37-F48
668 # The shift/control/alt keys do not modify each other, but alt overrides both,
669 # and control overrides shift.
671 # <pfkey> capability for F1-F48 -TD
672 ansi.sys|ANSI.SYS 3.1 and later versions,
673 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
674 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
675 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
676 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
677 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
678 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
679 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
680 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
681 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
682 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
683 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
684 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
685 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
686 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
687 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
691 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
692 # This should only be used when the terminal emulator cannot redefine the keys.
693 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
694 # definitions must be restored. If the terminal emulator is quit while in vi
695 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
696 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
697 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
698 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
699 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
700 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
701 # Consequently the End keypad key could not be set (it is relatively safe and
702 # actually useful because it sends ^@ O, which beeps and opens a line above).
703 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
704 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
705 \svi\s9-29-86\n\E[;75;8p,
706 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
707 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
708 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
709 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
712 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
713 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
714 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
715 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
718 # See ansi.sysk and nansi.sys above.
719 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
720 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
721 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
722 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
725 #### Atari ST terminals
727 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
729 tw52|tw52-color|Toswin window manager with color,
731 colors#16, pairs#0x100,
732 oc=\Eb?\Ec0, op=\Eb?\Ec0,
733 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
735 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
737 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
739 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
742 tw52-m|Toswin window manager monochrome,
745 bold=\Eya, dch1=\Ea, dim=\EyB,
746 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
747 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
748 smso=\EyQ, smul=\EyH, use=at-m,
749 tt52|Atari TT medium and high resolution,
750 lines#30, use=at-color,
751 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
753 colors#16, pairs#0x100,
754 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
755 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
756 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
757 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
758 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
760 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
761 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
762 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
763 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
765 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
766 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
767 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
768 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
770 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
771 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
772 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
773 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
776 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
778 cols#80, it#8, lines#24,
779 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
780 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
781 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
782 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
783 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
784 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
785 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
786 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
787 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
788 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
789 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
790 tw100|toswin vt100 window mgr,
792 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
793 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
795 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
796 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
797 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
798 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
799 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
800 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
801 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
802 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
803 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
804 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
805 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
806 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
807 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
808 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
809 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
810 rmso=\E[m, rmul=\E[m,
811 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
813 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
814 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
816 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
817 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
819 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
820 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
821 # The entries for stv52 and stv52pc probably need a revision.
822 stv52|MiNT virtual console,
824 cols#80, it#8, lines#30,
825 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
826 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
827 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
828 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
829 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
830 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
831 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
832 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
833 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
834 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
835 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
836 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
837 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
838 stv52pc|MiNT virtual console with PC charset,
840 cols#80, it#8, lines#30,
841 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
842 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
843 \363z\362{\343|\366}\234~\371,
844 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
845 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
846 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
847 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
848 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
849 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
850 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
851 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
852 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
853 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
854 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
855 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
858 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
861 cols#80, it#8, lines#25,
862 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
863 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
864 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
865 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
866 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
867 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
868 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
870 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
871 # MiNT VT52 emulation. 80 columns, 25 rows.
872 # MiNT is Now TOS, the operating system which comes with all Ataris now
873 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
874 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
875 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
876 st52-old|Atari ST with VT52 emulation,
879 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
880 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
881 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
882 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
883 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
884 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
885 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
886 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
887 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
892 ######## Terminal.app
894 # nsterm*|Apple_Terminal - AppKit Terminal.app
896 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
897 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
898 # Server and Mac OS X operating systems. There is also a
899 # "terminal.app" in GNUstep, but I believe it to be an unrelated
900 # codebase and I have not attempted to describe it here.
902 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
903 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
904 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
905 # version supports color.
907 # To determine the version of Terminal.app you're using by running:
909 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
911 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
913 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
915 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
917 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
919 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
921 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
922 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
923 # might work too, but really you're on your own here since these
924 # systems are very obsolete and I can't test them. I do welcome
925 # patches, though :).
929 # For GNUstep_Terminal, you're probably best off using "linux" or
930 # writing your own terminfo.
932 # For MacTelnet, you're on your own. It's a different codebase, and
933 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
935 # For iTerm.app, see "iterm".
938 # The AppKit Terminal.app descriptions all have names beginning with
939 # "nsterm". Note that the statusline (-s) versions use the window
940 # titlebar as a phony status line, and may produce warnings during
941 # compilation as a result ("tsl uses 0 parameters, expected 1".)
942 # Ignore these warnings, or even ignore these entries entirely. Apps
943 # which need to position the cursor or do other fancy stuff inside the
944 # status line won't work with these entries. They're primarily useful
945 # for programs like Pine which provide simple notifications in the
946 # status line. Please note that non-ASCII characters don't work right
947 # in the status line, since Terminal.app incorrectly interprets their
948 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
949 # versions) or only accepts status lines consisting entirely of
950 # characters from the first 256 Unicode positions (including C1 but
953 # The Mythology* of AppKit Terminal.app:
955 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
956 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
957 # shareware replacement for Terminal called "Stuart" which NeXT bought
958 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
959 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
960 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
961 # capabilities for the early versions, but I believe that the
962 # TERM_PROGRAM_VERSION may have been reset at some point.
964 # The early versions were tailored to the NeXT character set. Sometime
965 # after the Apple acquisition the encoding was switched to MacRoman
966 # (initially with serious altcharset bugs due to incomplete conversion
967 # of the old NeXT code,) and then later to UTF-8. Also sometime during
968 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
969 # 8-color support (initially buggy when combined with attributes, but
970 # that was later fixed.) More recently, around Mac OS X version 10.3
971 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
972 # some versions (for instance 133-1 which shipped with Mac OS X
973 # version 10.4) this suffered from the <bce> bug, but that seems to
974 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
976 # In the early days of Mac OS X the terminal was fairly buggy and
977 # would routinely crash under load. Many of these bugs seem to have
978 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
979 # some may still remain. This change seems to correspond to
980 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
983 # * This may correspond with what actually happened, but I don't
984 # know. It is based on guesswork, hearsay, private correspondence,
985 # my faulty memory, and the following online sources and references:
987 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
988 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
990 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
991 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
993 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
994 # "nsterm" to comply with the name length and case conventions and
995 # limitations of various software packages [notably Solaris terminfo
996 # and UNIX.] A single Apple_Terminal alias is retained for
997 # backwards-compatibility.
999 # * Added function key support (F1-F4). These only work in Terminal.app
1000 # version 51, hopefully the capabilities won't cause problems for people
1003 # * Added "full color" (-c) entries which support the 16-color mode in
1006 # * By default, version 51 uses UTF-8 encoding with broken altcharset
1007 # support, so "ASCII" (-7) entries without altcharset support were
1010 # nsterm - AppKit Terminal.app
1012 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
1013 # Terminal.app. It is a partial VT100 emulation with some xterm-like
1014 # extensions. This terminfo was written to describe versions 41
1015 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
1016 # version 10.1) of Terminal.app.
1018 # Terminal.app runs under the Mac OS X Quartz windowing system (and
1019 # other AppKit-supported windowing systems.) On the Mac OS X machine I
1020 # use, the executable for Terminal.app is:
1021 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
1023 # If you're looking for a description of the full-screen system
1024 # console which runs under Apple's Darwin operating system on PowerPC
1025 # platforms, see the "xnuppc" entry instead.
1027 # There were no function keys in version 41. In version 51, there are
1028 # four working function keys (F1, F2, F3 and F4.) The function keys
1029 # are included in all of these entries.
1031 # It does not support mouse pointer position reporting. Under some
1032 # circumstances the cursor can be positioned using option-click; this
1033 # works by comparing the cursor position and the selected position,
1034 # and simulating enough cursor-key presses to move the cursor to the
1035 # selected position. This technique fails in all but the simplest
1038 # It provides partial ANSI color support (background colors interacted
1039 # badly with bold in version 41, though, as reflected in :ncv:.) The
1040 # monochrome (-m) entries are useful if you've disabled color support
1041 # or use a monochrome monitor. The full color (-c) entries are useful
1042 # in version 51, which doesn't exhibit the background color bug. They
1043 # also enable an xterm-compatible 16-color mode.
1045 # The configurable titlebar is set using xterm-compatible sequences;
1046 # it is used as a status bar in the statusline (-s) entries. Its width
1047 # depends on font sizes and window sizes, but 50 characters seems to
1048 # be the default for an 80x24 window.
1050 # The MacRoman character encoding is used for some of the alternate
1051 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1052 # disable alternate character set support entirely, and the "VT100"
1053 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1054 # graphics emulation, which seems to think the character encoding is
1055 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1056 # are useful in Terminal.app version 51, which supports UTF-8 and
1057 # other ASCII-compatible character encodings but does not correctly
1058 # implement VT100 graphics; once VT100 graphics are correctly
1059 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1060 # usable in any ASCII-compatible character encoding [except perhaps
1061 # in UTF-8, where some experts argue for disallowing alternate
1062 # characters entirely.]
1064 # Terminal.app reports "vt100" as the terminal type, but exports
1065 # several environment variables which may aid detection in a shell
1066 # profile (i.e. .profile or .login):
1069 # TERM_PROGRAM=Apple_Terminal
1070 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1071 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1073 # For example, the following Bourne shell script would detect the
1074 # correct terminal type:
1076 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1079 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1087 # In a C shell derivative, this would be accomplished by:
1089 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1090 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1091 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1092 # setenv TERM "nsterm-old"
1094 # setenv TERM "nsterm-c-7"
1099 # The '+' entries are building blocks
1100 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1101 am, bw, msgr, xenl, xon,
1102 cols#80, it#8, lines#24,
1103 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1104 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1105 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1106 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1107 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1108 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1109 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
1110 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1111 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1112 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1113 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1114 %p5%t;2%;%?%p7%t;8%;m,
1115 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1116 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1118 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1119 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1120 enacs=\E(B\E)0, rmacs=^O,
1121 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1122 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1123 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1125 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1126 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
1127 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
1128 \271|\255}\243~\245,
1129 enacs=\E(B\E)0, rmacs=^O,
1130 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1131 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1132 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1134 # compare with xterm+sl-twm
1135 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1136 wsl#50, use=xterm+sl-twm,
1138 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1139 op=\E[0m, use=ibm+16color,
1141 nsterm+c41|AppKit Terminal.app v41 color support,
1142 colors#8, ncv#37, pairs#64,
1143 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1145 # These are different combinations of the building blocks
1147 # ASCII charset (-7)
1148 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1151 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1152 use=nsterm+s, use=nsterm+7,
1154 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1155 use=nsterm+c41, use=nsterm+7,
1157 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1158 use=nsterm+c, use=nsterm+7,
1160 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1161 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1163 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1164 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1166 # VT100 alternate-charset (-acs)
1167 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1170 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1171 use=nsterm+s, use=nsterm+acs,
1173 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1174 use=nsterm+c41, use=nsterm+acs,
1176 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1177 use=nsterm+c, use=nsterm+acs,
1179 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1180 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1182 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1183 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1186 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1189 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1190 use=nsterm+s, use=nsterm+mac,
1192 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1193 use=nsterm+c41, use=nsterm+mac,
1195 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1196 use=nsterm+c, use=nsterm+mac,
1198 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1199 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1201 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1202 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1204 # In Mac OS X version 10.5 the format of the preferences has changed
1205 # and a new, more complex technique is needed, e.g.,
1207 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1208 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1209 # ud.init();prefs=ud.persistentDomainForName_(
1210 # "com.apple.Terminal");prefs["Window Settings"][
1211 # prefs["Default Window Settings"]]["TerminalType"
1212 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1213 # "com.apple.Terminal")' nsterm-16color
1215 # and it is still not settable from the preferences dialog. This is
1216 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1217 # in Apple's bug reporter.
1219 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1220 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1221 # vt52, vt100, vt102 and xterm.
1222 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1224 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1225 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1226 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1227 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1228 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1229 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1230 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1231 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1232 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1233 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1235 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1236 # the background color erase feature. The newer version 240.2 in Mac OS X
1237 # version 10.5 does not.
1239 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1240 # and D P Schreber comparing to nsterm-c-s-acs.
1242 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1243 # can be set in Terminal.app, e.g.,
1245 # defaults write com.apple.Terminal TermCapString nsterm-bce
1247 # and that it is not set in Terminal's preferences dialog.
1249 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1252 # * The terminal description matches the default settings.
1253 # * The keyboard is configurable via a dialog.
1254 # * By default khome, kend, knext and kprev are honored only with a
1256 # * There are bindings for control left/right arrow (but not up/down).
1257 # Added those to nsterm-16color, which is the version used for OS X 10.6
1258 # * "Allow VT100 application keypage mode" is by default disabled.
1259 # There is no way to press keypad-comma unless application mode is enabled
1261 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1262 # * CHT, REP, SU, SD are buggy.
1263 # * ECH works (also in Leopard), but is not used here for compatibility.
1264 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1265 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1266 # nsterm entry from this file to override the MacPorts (20110404) or
1267 # system (20081102) copy of this file.
1268 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1269 # dialog defaults to xterm-256color. Alternative selections are ansi,
1270 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1271 # the menu says "Declare terminal as" without promising to actually emulate
1272 # the corresponding terminals. Indeed, changing TERM does not affect the
1273 # emulation itself. This means that
1274 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1276 # + the color model is the same for each setting of TERM (does not match
1278 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1279 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1280 # + the vt52 emulation does not give a usable shell because screen-clearing
1281 # does not work as expected.
1282 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1283 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1284 # as well as unmasking F10 (which had been used in the window manager). Those
1285 # keys are listed in this entry.
1286 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1287 bce, use=nsterm-16color,
1289 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1290 # TERM_PROGRAM_VERSION=309
1291 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1292 # TERM_PROGRAM_VERSION=303
1293 nsterm-256color|Terminal.app in OS X 10.8,
1294 use=xterm+256setaf, use=nsterm-bce,
1296 # removed bogus kDC7 -TD
1297 nsterm-build326|Terminal.app in OS X 10.9,
1298 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1299 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
1300 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-256color,
1303 nsterm-build343|Terminal.app in OS X 10.10,
1304 kend=\EOF, khome=\EOH, use=nsterm-build326,
1306 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
1308 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
1309 # + f1-f4 map to pf1-pf4
1310 # + no vt220 support aside from DECTCEM and ECH
1311 # + there are no protected areas. Forget about anything above vt220.
1312 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
1313 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
1314 # + but bce fails for 11.6.7.2 (test repeat).
1315 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
1316 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
1317 # + normal (not X10 or Highlight tracking) mouse now works.
1318 # + mouse any-event works
1319 # + mouse button-event works
1320 # + in alternate screen:
1322 # mode 1047 fails to restore cursor position (do not use)
1323 # mode 1049 fails to restore screen contents (do not use)
1324 # + dtterm window-modify operations work (some messages are not printed)
1325 # + dtterm window-report gives size of window in characters/pixels as
1326 # well as state of window.
1328 # + there is no difference between cnorm/cvvis
1329 # + has dim/invis/blink (no protect of course)
1330 # + most function keys with shift/control modifiers give beep
1331 # (user can configure, but out-of-the-box is what I record)
1332 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
1334 # + kLFT5/kRIT5 work, but not up/down with control-modifier
1335 # + kLFT/kRIT work, but not up/down with shift-modifier
1336 # + there are a few predefined bindings with Alt, but no clear pattern.
1337 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
1338 # Using ncurses test-program with xterm-new:
1340 # Using xterm's scripts:
1341 # + palette for 256-colors is hardcoded.
1342 # + no support for "dynamic colors"
1343 # + no support for tcap-query.
1344 nsterm-build361|Terminal.app in OS X 10.11,
1346 kmous=\E[M, use=nsterm-build343,
1348 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
1349 # Comparing with build361, little has changed, except that italics work.
1350 # Direct-color is not supported, by the way.
1352 # Improved rmso/rmul -TD
1353 nsterm-build400|Terminal.app in OS X 10.13,
1354 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
1355 use=ecma+italics, use=nsterm-build361,
1357 # This is an alias which should always point to the "current" version
1358 nsterm|Apple_Terminal|AppKit Terminal.app,
1359 use=nsterm-build400,
1361 ######## iTerm, iTerm2
1365 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
1366 # featureful) terminal emulator for Mac OS X. It is similar enough in
1367 # capabilities to nsterm-16color that I have derived this description from that
1368 # one, but as far as I know they share no code. Many of the features are
1369 # user-configurable, but I attempt only to describe the default configuration
1372 # According to its documentation, iTerm uses terminfo to obtain function key
1373 # definitions. For example, if it is started with TERM=xterm, it uses key
1374 # definitons from that terminal description from the local OSX machine. Those
1375 # $TERM settings may be augmented using the bookmark and profile dialogs.
1376 # However, the behavior seen with tack does not agree with either the terminfo
1377 # description or the function keys in its "xterm" profile.
1381 # reports primary DA as VT100 with AVO: \E[?1;2c
1382 # reports secondary DA as "\E[>0;95;c"
1383 # supports blink and underline
1384 # displays bold text as red
1385 # recognizes all dtterm controls for modifying/querying window
1386 # resizing via escape sequence is very slow
1387 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
1388 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
1389 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
1392 # with ncurses test-program:
1393 # ncurses 'k' has problem in second screen; light background does not fill
1394 # with xterm scripts
1395 # can display/alter xterm-256color cube
1396 # can display/alter xterm-88color cube
1397 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1398 am, bce, hs, mir, msgr, npc, xenl, xon,
1399 cols#80, it#8, lines#24, wsl#50,
1400 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1401 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1402 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
1403 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1404 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1405 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1406 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1407 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
1408 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
1409 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
1410 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
1411 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1412 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
1413 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1414 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1415 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
1416 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
1417 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
1418 rmso=\E[m, rmul=\E[m,
1419 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1420 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
1422 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
1423 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
1424 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
1425 vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
1426 use=xterm+sl-twm, use=vt100+keypad, use=xterm+x11mouse,
1431 # https://www.iterm2.com/
1432 # https://github.com/gnachman/iTerm2
1433 # ~/Library/Preferences/com.googlecode.iterm2.plist
1434 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
1438 # reports primary DA as VT100 with AVO: \E[?1;2c
1439 # reports secondary DA as "\E[>0;95;0c"
1440 # numeric keypad application mode does not work
1441 # by default, dtterm window-modifications are ignored
1442 # by default, dtterm window-reports return, but icon as "L", window as "l"
1443 # supports SD/SU, no REP, SL, SR
1444 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
1445 # no improvement to XFree86 1047/1048 modes
1447 # in meta-mode, imitates xterm, sending UTF-8
1448 # special-key modifiers based on xterm use incompatible default for alt/meta
1449 # with ncurses test-program:
1451 # no improvement to ncurses 'k'
1452 # with xterm scripts:
1455 # Italic text did not work initially, apparently because upgrading did not
1456 # add/change that preference (set in Preferences, Profiles, Text). A new
1457 # install of iTerm 3.0.15 provides italics by default (blinking text:no).
1459 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
1460 iTerm2.app|iterm2|terminal emulator for Mac OS X,
1461 blink@, dim=\E[2m, kEND=\E[1;2F, kHOM=\E[1;2H, ka1@, ka3@,
1462 kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P, kf14=\E[1;2Q,
1463 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
1464 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
1465 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
1466 kind=\E[1;2B, kri=\E[1;2A,
1467 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1468 %p5%t;2%;m%?%p9%t\016%e\017%;,
1469 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
1470 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
1471 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
1472 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
1473 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
1474 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
1475 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
1476 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
1477 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+italics, use=iterm,
1479 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1481 # On PowerPC platforms, Apple's Darwin operating system uses a
1482 # full-screen system console derived from a NetBSD framebuffer
1483 # console. It is an ANSI-style terminal, and is not really VT-100
1486 # Under Mac OS X, this is the system console driver used while in
1487 # single-user mode [reachable by holding down Command-S during the
1488 # boot process] and when logged in using console mode [reachable by
1489 # typing ">console" at the graphical login prompt.]
1491 # If you're looking for a description of the Terminal.app terminal
1492 # emulator which runs under the Mac OS X Quartz windowing system (and
1493 # other AppKit-supported windowing systems,) see the "nsterm"
1496 # NOTE: Under Mac OS X version 10.1, the default login window does not
1497 # prompt for user name, instead requiring an icon to be selected from
1498 # a list of known users. Since the special ">console" login is not in
1499 # this list, you must make one of two changes in the Login Window
1500 # panel of the Login section of System Prefs to make the special
1501 # ">console" login accessible. The first option is to enable 'Show
1502 # "Other User" in list for network users', which will add a special
1503 # "Other..." icon to the graphical login panel. Selecting "Other..."
1504 # will present the regular graphical login prompt. The second option
1505 # is to change the 'Display Login Window as:' setting to 'Name and
1506 # password entry fields', which replaces the login panel with a
1507 # graphical login prompt.
1509 # There are no function keys, at least not in Darwin 1.3.
1511 # It has no mouse support.
1513 # It has full ANSI color support, and color combines correctly with
1514 # all three supported attributes: bold, inverse-video and underline.
1515 # However, bold colored text is almost unreadable (bolding is
1516 # accomplished using shifting and or-ing, and looks smeared) so bold
1517 # has been excluded from the list of color-compatible attributes
1518 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1519 # monochrome monitor.
1521 # There is one serious bug with this terminal emulation's color
1522 # support: repositioning the cursor onto a cell with non-matching
1523 # colors obliterates that cell's contents, replacing it with a blank
1524 # and displaying a colored cursor in the "current" colors. There is
1525 # no complete workaround at present [other than using the monochrome
1526 # (-m) entries,] but removing the (msgr) capability seemed to help.
1528 # The "standout" chosen was simple reverse-video, although a colorful
1529 # standout might be more aesthetically pleasing. Similarly, the bold
1530 # chosen is the terminal's own smeared bold, although a simple
1531 # color-change might be more readable. The color-bold (-b) entries
1532 # uses magenta colored text for bolding instead. The fancy color (-f
1533 # and -f2) entries use color for bold, standout and underlined text
1534 # (underlined text is still underlined, though.)
1536 # Apparently the terminal emulator does support a VT-100-style
1537 # alternate character set, but all the alternate character set
1538 # positions have been left blank in the font. For this reason, no
1539 # alternate character set capabilities have been included in this
1540 # description. The console driver appears to be ASCII-only, so (enacs)
1541 # has been excluded [although the VT-100 sequence does work.]
1543 # The default Mac OS X and Darwin installation reports "vt100" as the
1544 # terminal type, and exports no helpful environment variables. To fix
1545 # this, change the "console" entry in /etc/ttys from "vt100" to
1546 # "xnuppc-WxH", where W and H are the character dimensions of your
1547 # console (see below.)
1549 # The font used by the terminal emulator is apparently one originally
1550 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1551 # file includes descriptions for the following geometries:
1553 # Pixels Characters Entry Name (append -m for monochrome)
1554 # -------------------------------------------------------------------
1555 # 640x400 80x25 xnuppc-80x25
1556 # 640x480 80x30 xnuppc-80x30
1557 # 720x480 90x30 xnuppc-90x30
1558 # 800x600 100x37 xnuppc-100x37
1559 # 896x600 112x37 xnuppc-112x37
1560 # 1024x640 128x40 xnuppc-128x40
1561 # 1024x768 128x48 xnuppc-128x48
1562 # 1152x768 144x48 xnuppc-144x48
1563 # 1280x1024 160x64 xnuppc-160x64
1564 # 1600x1024 200x64 xnuppc-200x64
1565 # 1600x1200 200x75 xnuppc-200x75
1566 # 2048x1536 256x96 xnuppc-256x96
1568 # The basic "xnuppc" entry includes no size information, and the
1569 # emulator includes no reporting capability, so you'll be at the mercy
1570 # of the TTY device (which reports incorrectly on my hardware.) The
1571 # color-bold entries do not include size information.
1573 # The '+' entries are building blocks
1574 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1577 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1578 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1579 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1580 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1581 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
1582 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1583 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1584 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1586 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1587 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1588 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1590 xnuppc+c|Darwin PowerPC Console ANSI color support,
1591 colors#8, ncv#32, pairs#64,
1592 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1594 xnuppc+b|Darwin PowerPC Console color-bold support,
1597 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1600 xnuppc+f|Darwin PowerPC Console fancy color support,
1602 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
1604 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1606 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1609 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1610 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1612 # Building blocks for specific screen sizes
1613 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1616 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1619 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1622 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1625 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1628 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1631 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1634 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1637 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1640 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1643 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1646 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1647 cols#0x100, lines#96,
1649 # These are different combinations of the building blocks
1651 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1654 xnuppc|darwin|Darwin PowerPC Console (color),
1655 use=xnuppc+c, use=xnuppc+basic,
1657 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1660 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1661 use=xnuppc+b, use=xnuppc+c,
1663 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1666 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1667 use=xnuppc+f, use=xnuppc+c,
1669 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1672 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1673 use=xnuppc+f2, use=xnuppc+c,
1675 # Combinations for specific screen sizes
1676 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1677 use=xnuppc+80x25, use=xnuppc+basic,
1679 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1680 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1682 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1683 use=xnuppc+80x30, use=xnuppc+basic,
1685 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1686 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1688 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1689 use=xnuppc+90x30, use=xnuppc+basic,
1691 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1692 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1694 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1695 use=xnuppc+100x37, use=xnuppc+basic,
1697 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1698 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1700 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1701 use=xnuppc+112x37, use=xnuppc+basic,
1703 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1704 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1706 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1707 use=xnuppc+128x40, use=xnuppc+basic,
1709 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1710 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1712 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1713 use=xnuppc+128x48, use=xnuppc+basic,
1715 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1716 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1718 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1719 use=xnuppc+144x48, use=xnuppc+basic,
1721 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1722 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1724 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1725 use=xnuppc+160x64, use=xnuppc+basic,
1727 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1728 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1730 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1731 use=xnuppc+200x64, use=xnuppc+basic,
1733 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1734 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1736 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1737 use=xnuppc+200x75, use=xnuppc+basic,
1739 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1740 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1742 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1743 use=xnuppc+256x96, use=xnuppc+basic,
1745 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1746 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1751 # BeOS entry for Terminal program Seems to be almost ANSI
1752 beterm|BeOS Terminal,
1753 am, eo, mir, msgr, xenl, xon,
1754 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1755 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1756 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1757 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1758 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1759 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1760 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1761 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1762 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
1763 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1764 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1765 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1766 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1767 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1768 nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1769 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1770 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1771 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1772 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1773 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1779 # This entry is good for the 1.2.13 or later version of the Linux console.
1781 # ***************************************************************************
1784 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1785 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1786 # * character. Here are the keymap replacement lines that will set this up: *
1788 # keycode 15 = Tab Tab
1789 # alt keycode 15 = Meta_Tab
1790 # shift keycode 15 = F26
1791 # string F26 ="\033[Z"
1793 # * This has to use a key slot which is unfortunate (any unused one will *
1794 # * do, F26 is the higher-numbered one). The change ought to be built *
1795 # * into the kernel tables. *
1797 # ***************************************************************************
1799 # All linux kernels since 1.2.13 (at least) set the screen size
1800 # themselves; this entry assumes that capability.
1802 linux-basic|linux console,
1803 am, bce, eo, mir, msgr, xenl, xon,
1805 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1806 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1807 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1808 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1809 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1810 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1811 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1812 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1813 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
1814 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1815 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1816 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1817 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1818 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1819 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1820 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1821 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1822 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1823 kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1824 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1825 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1826 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1827 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1828 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1831 linux-m|Linux console no color,
1833 setab@, setaf@, setb@, setf@, use=linux,
1835 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1836 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1837 # not supposedly back-portable to older SV curses (although it has worked fine
1838 # on Solaris for several years) and not supported in ncurses versions before
1840 linux-c-nc|linux console with color-change,
1842 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1843 %02x%p4%{255}%*%{1000}%/%02x,
1844 oc=\E]R, use=linux-basic,
1845 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1846 linux-c|linux console 1.3.6+ for older ncurses,
1848 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1849 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1850 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1851 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1852 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1853 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1854 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1855 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1857 oc=\E]R, use=linux-basic,
1859 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1860 # get a block cursor for cvvis.
1861 # reported by Frank Heckenbach <frank@g-n-u.de>.
1862 linux2.2|linux 2.2.x console,
1863 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1864 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1866 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1867 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1868 # Although the kernel has mappings for these, they were not in the default
1869 # font (tested with Debian and Fedora):
1875 linux2.6|linux 2.6.x console,
1876 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1878 enacs=\E)0, rmacs=^O,
1879 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1880 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1881 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1883 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1884 # It is the same as xterm's erase-saved-lines feature.
1885 linux3.0|linux 3.0 kernels,
1886 E3=\E[3J, use=linux2.6,
1888 # This is Linux console for ncurses.
1889 linux|linux console,
1892 # Subject: linux 2.6.26 vt back_color_erase
1893 # Changes to the Linux console driver broke bce model as reported in
1894 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1896 # http://lkml.org/lkml/2008/4/26/305
1897 # http://lkml.org/lkml/2008/10/3/66
1898 linux2.6.26|linux console w/o bce,
1901 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1902 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1903 ich@, ich1@, use=linux,
1905 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1906 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1907 linux-koi8|linux with koi8 alternate character set,
1908 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1909 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1910 \211w\210x\201y\230z\231{\267|\274~\224,
1911 use=linux, use=klone+koi8acs,
1913 # Another entry for KOI8-r with Qing Long's acsc.
1914 # (which one better complies with the standard?)
1915 linux-koi8r|linux with koi8-r alternate character set,
1916 use=linux, use=klone+koi8acs,
1918 # Entry for the latin1 and latin2 fonts
1919 linux-lat|linux with latin1 or latin2 alternate character set,
1920 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1921 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1922 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1925 # This uses graphics from VT codeset instead of from cp437.
1926 # reason: cp437 (aka "straight to font") is not functional under luit.
1927 # from: Andrey V Lukyanov <land@long.yar.ru>.
1928 linux-vt|linux console using VT codes for graphics,
1929 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1931 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1934 # This is based on the Linux console (relies on the console to perform some
1935 # of the functionality), but does not recognize as many control sequences.
1936 # The program comes bundled with an old (circa 1998) copy of the Linux
1937 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1938 # \E* move cursor to home, as as \E[H
1940 # \EE move cursor to beginning of row
1941 # \E[y,xf same as \E[y,xH
1943 # Note: The status-line support is buggy (dsl does not work).
1944 kon|kon2|jfbterm|Kanji ON Linux console,
1946 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1947 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1951 # Another variant. There are two parts (src, src/lib) with the latter
1952 # comprising the escape-sequence parsing. The copyright notice on that
1953 # says it is based on GTerm by Timothy Miller.
1955 # The original developer "dragchan" has left, but as of March 2017 there is
1956 # (still dead) code from May 2015 here:
1957 # https://github.com/izmntuk/fbterm
1959 # The acsc string may be incorrect.
1961 # Not used here, the program recognizes escapes for italic, underline and
1962 # dim, rendering those as green, cyan and gray respectively.
1963 fbterm|FbTerm for Linux with framebuffer,
1964 colors#0x100, pairs#0x10000,
1965 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1966 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1967 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1968 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1969 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1970 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1971 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1972 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1974 # 16-color linux console entry; this works with a 256-character
1975 # console font but bright background colors turn into dim ones when
1976 # you use a 512-character console font. This uses bold for bright
1977 # foreground colors and blink for bright background colors.
1978 linux-16color|linux console with 16 colors,
1979 colors#16, ncv#42, pairs#0x100,
1980 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1981 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1984 # bterm (bogl 0.1.18)
1985 # Implementation is in bogl-term.c
1986 # Key capabilities from linux terminfo entry
1989 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1990 # bterm does not support sgr, since it only processes one parameter -TD
1991 bterm|bogl virtual terminal,
1993 colors#8, cols#80, lines#24, pairs#64,
1994 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1995 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
1996 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
1997 kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1998 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1999 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2000 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2001 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
2002 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
2003 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2004 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
2005 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
2006 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2007 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
2012 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
2015 cols#80, it#8, lines#25,
2016 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
2017 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2018 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2019 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2020 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
2021 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2022 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
2023 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2024 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
2025 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
2026 smso=\E[7m, smul=\E[4m,
2027 mach-bold|Mach Console with bold instead of underline,
2028 rmul=\E[0m, smul=\E[1m, use=mach,
2029 mach-color|Mach Console with ANSI color,
2031 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
2032 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
2034 # From: Samuel Thibault
2035 # Source: git://git.sv.gnu.org/hurd/gnumach.git
2036 # Files: i386/i386at/kd.c
2038 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
2040 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
2041 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
2042 \263y\363z\362{\343|\330}\234~\376,
2043 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
2044 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
2045 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
2046 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
2047 2%;%?%p6%t;1%;%?%p7%t;8%;m,
2050 mach-gnu-color|Mach Console with ANSI color,
2052 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
2053 setaf=\E[3%p1%dm, use=mach-gnu,
2055 # From: Marcus Brinkmann
2056 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
2058 # Comments in the original are summarized here:
2060 # hurd uses 8-bit characters (km).
2062 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
2064 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
2065 # have the eat_newline_glitch. It doesn't support setting or removing tab
2068 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
2069 # one byte instead three.
2071 # <ich1> is not included because hurd has insert mode.
2073 # hurd doesn't use ^J for scrolling, because this could put things into the
2074 # scrollback buffer.
2076 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
2077 # This is a GNU extension.
2079 # The original has commented-out ncv, but is restored here.
2081 # Reading the source, RIS resets cnorm, but not xmous.
2082 hurd|The GNU Hurd console server,
2083 am, bce, bw, eo, km, mir, msgr, xenl, xon,
2084 colors#8, it#8, ncv#18, pairs#64,
2085 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2087 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2088 clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2089 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2090 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2091 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
2092 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
2093 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
2094 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
2095 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
2096 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
2097 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
2098 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
2099 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2100 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2101 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
2102 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2103 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2104 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
2105 rin=\E[%p1%dT, rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m,
2106 rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm,
2108 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
2109 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2110 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
2111 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
2118 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
2119 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
2120 # right corner without triggering a scroll. The ncurses terminfo library can
2121 # handle this case with the <ich1> capability, and prefers <am> for better
2122 # optimization. Bug: The <op> capability resets attributes.
2123 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
2124 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
2125 qnx|qnx4|qnx console,
2126 daisy, km, mir, msgr, xhpa, xt,
2127 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
2128 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
2129 \303u\264v\301w\302x\263,
2130 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
2131 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
2132 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
2133 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
2134 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
2135 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
2136 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
2137 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
2138 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
2139 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
2140 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
2141 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
2142 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
2143 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
2144 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
2145 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
2146 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
2147 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
2148 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
2149 kext=\377\270, kf1=\377\201, kf10=\377\212,
2150 kf11=\377\256, kf12=\377\257, kf13=\377\213,
2151 kf14=\377\214, kf15=\377\215, kf16=\377\216,
2152 kf17=\377\217, kf18=\377\220, kf19=\377\221,
2153 kf2=\377\202, kf20=\377\222, kf21=\377\223,
2154 kf22=\377\224, kf23=\377\333, kf24=\377\334,
2155 kf25=\377\225, kf26=\377\226, kf27=\377\227,
2156 kf28=\377\230, kf29=\377\231, kf3=\377\203,
2157 kf30=\377\232, kf31=\377\233, kf32=\377\234,
2158 kf33=\377\235, kf34=\377\236, kf35=\377\276,
2159 kf36=\377\277, kf37=\377\321, kf38=\377\322,
2160 kf39=\377\323, kf4=\377\204, kf40=\377\324,
2161 kf41=\377\325, kf42=\377\326, kf43=\377\327,
2162 kf44=\377\330, kf45=\377\331, kf46=\377\332,
2163 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
2164 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
2165 khlp=\377\350, khome=\377\240, khts=\377\342,
2166 kich1=\377\253, kil1=\377\273, kind=\377\261,
2167 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
2168 knp=\377\252, knxt=\377\312, kopn=\377\357,
2169 kopt=\377\353, kpp=\377\242, kprt=\377\255,
2170 kprv=\377\302, krdo=\377\336, kref=\377\354,
2171 kres=\377\360, krfr=\377\347, kri=\377\271,
2172 krmir=\377\313, krpl=\377\362, krst=\377\352,
2173 ksav=\377\361, kslt=\377\247, kspd=\377\335,
2174 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
2175 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
2176 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
2177 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
2181 qnxt|qnxt4|QNX4 terminal,
2184 qnxm|QNX4 with mouse events,
2186 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
2187 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
2188 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
2189 smicm=\E/>2h, use=qnx4,
2194 # Monochrome QNX4 terminal or console. Setting this terminal type will
2195 # allow an application running on a color console to behave as if it
2196 # were a monochrome terminal. Output will be through stdout instead of
2197 # console writes because the term routines will recognize that the
2198 # terminal name starts with 'qnxt'.
2200 qnxtmono|Monochrome QNX4 terminal or console,
2204 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
2205 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
2206 # (TD: derive from original qnx4 entry)
2207 qnxt2|qnx 2.15 serial terminal,
2209 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
2210 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
2212 # QNX ANSI terminal definition
2215 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
2216 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2217 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2218 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
2219 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
2220 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2221 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
2222 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
2223 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
2224 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
2225 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
2226 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
2227 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
2228 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
2229 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
2230 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
2231 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
2232 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
2233 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
2234 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
2235 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
2236 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
2237 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
2238 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
2239 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
2240 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
2241 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
2242 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
2243 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
2244 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
2245 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
2246 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
2247 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
2248 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
2249 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
2250 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
2251 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
2252 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
2253 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
2254 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2255 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2257 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2259 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
2260 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
2261 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
2262 smul=\E[4m, tbc=\E[3g,
2263 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
2265 qansi|QNX ansi with console writes,
2266 daisy, xhpa, use=qansi-g,
2268 qansi-t|QNX ansi without console writes,
2271 qansi-m|QNX ansi with mouse,
2273 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2274 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2275 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2276 smicm=\E[>2h, use=qansi,
2278 qansi-w|QNX ansi for windows,
2283 # SCO console and SOS-Syscons console for 386bsd
2284 # (scoansi: had unknown capabilities
2285 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2286 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2287 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2288 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2289 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2290 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2291 # on the <smacs>=\E[12m -- esr)
2293 # klone+sgr-dumb is an error since the acsc does not match -TD
2295 # In this description based on SCO's keyboard(HW) manpage list of default
2296 # function key values:
2297 # F13-F24 are shifted F1-F12
2298 # F25-F36 are control F1-F12
2299 # F37-F48 are shift+control F1-F12
2301 # hpa/vpa work in the console, but not in scoterm:
2305 # SCO's terminfo uses
2308 # which do not work (console or scoterm).
2310 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2311 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2312 OTbs, am, bce, eo, xon,
2313 colors#8, cols#80, it#8, lines#25, pairs#64,
2314 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
2315 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
2317 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2318 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2319 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2320 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2321 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2322 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2323 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2324 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2325 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2326 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2327 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2328 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2329 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2330 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2331 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2332 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2333 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2334 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2335 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2336 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2337 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2338 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2339 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2340 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2341 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2342 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2344 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2345 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2346 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2347 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
2348 %p7%t;8%;%?%p9%t;12%e;10%;m,
2349 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2350 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2351 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2352 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2353 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2355 # make this easy to change...
2356 scoansi|SCO Extended ANSI standard crt,
2361 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2362 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2363 # for the application keypad mode. We have added iris-ansi-ap rather than
2364 # change the original to keypad mode.
2366 # (iris-ansi: added rmam/smam based on init string -- esr)
2368 # This entry, and those derived from it, is used in xwsh (also known as
2369 # winterm). Some capabilities that do not fit into the terminfo model
2370 # include the shift- and control-functionkeys:
2372 # F1-F12 generate different codes when shift or control modifiers are used.
2376 # control-F1 \E[025q
2378 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2379 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2381 # The cursor keys also have different codes:
2382 # control-up \E[162q
2383 # control-down \E[165q
2384 # control-left \E[159q
2385 # control-right \E[168q
2388 # shift-down \E[164q
2389 # shift-left \E[158q
2390 # shift-right \E[167q
2392 # control-tab \[072q
2394 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2396 cols#80, it#8, lines#40,
2397 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2398 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
2399 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
2400 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2401 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2402 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2403 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2404 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2405 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2406 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2407 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
2408 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
2409 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
2410 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
2411 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
2412 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
2413 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
2414 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2415 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2417 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2418 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2419 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2421 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2422 # (T.Dickey 98/1/24)
2423 iris-color|xwsh|IRIX ANSI with color,
2425 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2426 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
2427 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2428 use=ecma+italics, use=vt100+enq, use=klone+color,
2431 #### OpenBSD consoles
2433 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2435 # The following terminal descriptions for the AMD/Intel PC console
2436 # were prepared based on information contained in the OpenBSD-4.9
2437 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2439 # Added bce based on testing with tack -TD
2440 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2441 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2443 # Notes from testing with vttest:
2444 # fails wrapping test
2446 # identifies as vt200 with selective erase, but does not implement DECSCA
2449 # ESC # 8 DEC Screen Alignment Test (DECALN).
2450 # CSI ? 5 h Reverse Video (DECSCNM).
2452 pccon+keys|OpenBSD PC keyboard keys,
2453 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2454 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
2455 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2456 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2457 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
2458 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
2459 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2460 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2462 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2463 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
2465 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
2467 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2468 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2470 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2471 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
2473 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2474 # underline renders as color
2475 pccon+colors|ANSI colors for OpenBSD PC console,
2477 colors#8, ncv#2, pairs#64,
2478 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2479 pccon+base|base capabilities for OpenBSD PC console,
2480 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2481 cols#80, it#8, lines#24,
2482 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
2483 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2484 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
2485 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2486 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2487 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
2488 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
2490 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2491 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
2492 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2493 use=pccon0-m, use=pccon+colors,
2494 pccon-m|OpenBSD PC console without colors,
2495 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2496 pccon|OpenBSD PC console,
2497 use=pccon-m, use=pccon+colors,
2499 #### NetBSD consoles
2501 # pcvt termcap database entries (corresponding to release 3.31)
2502 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2504 # (For the terminfo master file, I translated these into terminfo syntax.
2505 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2506 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2507 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2509 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2510 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2511 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2512 pcvtXX|pcvt vt200 emulator (DEC VT220),
2513 am, km, mir, msgr, xenl,
2515 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2517 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2518 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
2519 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2520 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2521 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2522 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2523 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2524 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2525 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
2526 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2527 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2528 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2529 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2530 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2531 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2532 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2533 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2534 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2535 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2537 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2538 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2539 # 50 lines entries; 80 columns
2540 pcvt25|dec vt220 emulation with 25 lines,
2542 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2543 pcvt28|dec vt220 emulation with 28 lines,
2545 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2546 pcvt35|dec vt220 emulation with 35 lines,
2548 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2549 pcvt40|dec vt220 emulation with 40 lines,
2551 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2552 pcvt43|dec vt220 emulation with 43 lines,
2554 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2555 pcvt50|dec vt220 emulation with 50 lines,
2557 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2559 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2560 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2561 # 50 lines entries; 132 columns
2562 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2564 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2565 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2567 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2568 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2570 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2571 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2573 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2574 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2576 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2577 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2579 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2581 # OpenBSD implements a color variation
2582 pcvt25-color|dec vt220 emulation with 25 lines and color,
2584 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2585 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2586 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2587 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2588 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2591 # Terminfo entries to enable the use of the ncurses library in colour on a
2592 # NetBSD-arm32 console (only tested on a RiscPC).
2593 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2594 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2595 # typo in invis - TD
2596 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2597 am, bce, msgr, xenl, xon,
2598 cols#80, it#8, lines#30,
2599 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2600 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2601 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2602 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2603 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2604 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2605 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2606 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
2607 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2608 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2609 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2610 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2611 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2612 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2613 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2615 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2616 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2617 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2618 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2621 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2622 cols#132, lines#50, use=arm100,
2624 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2625 # manufactured by Sharp for the Japanese market.
2626 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2627 x68k|x68k-ite|NetBSD/x68k ITE,
2629 kclr=\E[9~, khlp=\E[28~, use=vt220,
2632 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2634 # (still unfinished, but good enough so far.)
2635 ofcons|DNARD OpenFirmware console,
2638 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
2639 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2640 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2641 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2642 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2643 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2644 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
2645 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2646 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2647 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2648 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
2649 rmso=\2330m, rmul=\2330m,
2650 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
2651 %;%?%p1%p3%|%t;7%;m,
2652 sgr0=\2330m, smso=\2337m, smul=\2334m,
2654 # NetBSD "wscons" emulator in vt220 mode.
2655 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2656 # The emulator renders underlined text in red. Colors are otherwise usable.
2658 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2659 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2660 # vt220 screens in vttest do not work with this emulator. For instance, it
2661 # identifies itself (primary DA response) as a vt220 with selective erase. But
2662 # the selective erase feature does not work. The secondary response is copied
2663 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2664 # the level of detail in a termcap, it is a passable emulator, since ECH does
2665 # work. Don't use it on a VMS system -TD
2666 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2668 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2669 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2670 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2671 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2672 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2673 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2674 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2676 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2679 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2681 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2682 # Initial testing set TERM=xterm, based on comments by developers, found too
2683 # many differences to continue in that path. However, test-results may be
2684 # useful to people curious about compatibility with xterm.
2686 # Testing with tack:
2688 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2689 # There is color-bleeding in the color-pairs screen.
2690 # Attributes do not work with color
2692 # Failed: kf1-kf4, kf13-kf48, khome, kend
2693 # (effectively xterm-r6 for function-keys)
2694 # None of the function or cursor key-modifiers are encoded.
2695 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2697 # Testing with vttest:
2698 # -------------------
2699 # Identifies as vt220 with selective erase
2700 # (however, selective erase refers to DECSCA, SPA)
2701 # Does not implement vt52
2702 # Uses spaces to simulate double-size characters
2703 # Does not support 8-bit controls
2704 # Does not support VT220 reports
2705 # Does not support send/receive mode
2706 # Supports ECH (like rxvt)
2707 # Does not support DECSCA
2708 # Does not support any of the ISO-6429 cursor-movement
2709 # Does not support any of the ISO-6429 miscellaneous tests
2710 # (SL/SR also leave unexpected char on screen too)
2711 # Background does not change in menu 11.6.9 (SGR 22-27)
2712 # None of the xterm special features tests work
2713 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2716 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2718 rcons|BSD rasterconsole,
2720 # Color version of above. Color currently only provided by NetBSD.
2721 rcons-color|BSD rasterconsole with ANSI color,
2724 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2726 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2727 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2728 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2729 # -- compare with cons25w
2730 mgterm|MGL/MGL2 MobileGear Graphic Library,
2731 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2732 colors#8, cols#80, it#8, lines#18, pairs#64,
2733 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2734 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2735 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2736 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2737 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2738 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2739 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2740 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2741 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2742 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2743 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2744 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2745 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2746 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2747 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2748 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2750 #### FreeBSD console entries
2752 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2753 # Andrey Chernov maintains the FreeBSD termcap distributions.
2755 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2756 # or comment out the :cb: capability in the console entry.
2758 # Alexander Lukyanov reports:
2759 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2760 # Now el1 clears not only to the line beginning, but also a large chunk
2761 # of previous line. But there is another bug - ech does not work at all.
2765 # common entry without semigraphics
2766 # Bug: The <op> capability resets attributes.
2767 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2768 # instance el1 does if the cursor is moved to the right margin first. Removed
2769 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2771 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2772 # Note that this disables standout with color.
2774 # The emulator sends difference strings based on shift- and control-keys,
2776 # F13-F24 are shifted F1-F12
2777 # F25-F36 are control F1-F12
2778 # F37-F48 are shift+control F1-F12
2779 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2780 am, bce, bw, eo, msgr, npc,
2781 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2782 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2783 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2784 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2785 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2786 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2787 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2788 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2789 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2790 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2791 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2792 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2793 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2794 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2795 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2796 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2797 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2798 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2799 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2800 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2801 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2802 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2803 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2804 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2805 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2807 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2808 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2809 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2810 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2813 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2814 kbs=^?, kdch1=\E[3~, use=cons25,
2815 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2817 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2818 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2819 smul=\E[4m, use=cons25,
2820 cons30|ansi80x30|freebsd console (30-line ansi mode),
2821 lines#30, use=cons25,
2822 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2823 lines#30, use=cons25-m,
2824 cons43|ansi80x43|freebsd console (43-line ansi mode),
2825 lines#43, use=cons25,
2826 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2827 lines#43, use=cons25-m,
2828 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2829 lines#50, use=cons25,
2830 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2831 lines#50, use=cons25-m,
2832 cons60|ansi80x60|freebsd console (60-line ansi mode),
2833 lines#60, use=cons25,
2834 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2835 lines#60, use=cons25-m,
2836 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2837 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2838 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2841 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2843 op@, rmul=\E[m, setab@, setaf@,
2844 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2845 %t;30;1%;%?%p6%t;1%;m,
2846 smul=\E[4m, use=cons25r,
2847 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2848 lines#50, use=cons25r,
2849 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2850 lines#50, use=cons25r-m,
2851 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2852 lines#60, use=cons25r,
2853 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2854 lines#60, use=cons25r-m,
2855 # ISO 8859-1 FreeBSD console
2856 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2857 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2858 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2859 \226v\227w\230x\231y\232z\233~\237,
2861 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2863 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2864 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2865 smul=\E[4m, use=cons25l1,
2866 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2867 lines#50, use=cons25l1,
2868 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2869 lines#50, use=cons25l1-m,
2870 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2871 lines#60, use=cons25l1,
2872 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2873 lines#60, use=cons25l1-m,
2875 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2876 # which is intended to be xterm-compatible. See for example
2877 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2878 # in particular scterm-teken.c
2880 # For FreeBSD 9 and 10:
2881 # --------------------
2882 # The /etc/ttys entries for console and other ttys are all configured to set
2885 # Testing with tack:
2886 # There is no VT100 line-drawing (uses +'s and -'s)
2887 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2889 # Testing with vttest:
2890 # Menu 2 diamonds don't work, blink ditto, light background ditto
2891 # The terminal identifies itself as VT100 with AVO
2892 # There is no VT52 support
2893 # There is no doublesize character support
2894 # The terminal supports ECH (like rxvt)
2895 # The terminal does not support send/receive mode
2896 # The terminal supports all of the ISO-6429 cursor-movement
2897 # The terminal supports some of the ISO-6429 miscellaneous tests
2898 # (SL/SR also leave unexpected char on screen too)
2900 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2901 # the cells which happen to have ASCII control-character values:
2902 # - ^X arrow pointing up
2903 # . ^Y arrow pointing down
2907 # Those are removed from this entry's acsc string to avoid confusion.
2908 # The resulting description provides correct line-drawing and function-keys -TD
2909 teken|syscons with teken,
2911 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2912 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2913 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2914 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2915 kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
2916 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2917 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2918 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2919 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2920 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2922 #### 386BSD and BSD/OS Consoles
2925 # This was the original 386BSD console entry (I think).
2926 # Some places it's named oldpc3|oldibmpc3.
2927 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2928 origpc3|origibmpc3|IBM PC 386BSD Console,
2929 OTbs, am, bw, eo, xon,
2931 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2933 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2934 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2935 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2936 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2937 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2938 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2940 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2941 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2944 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2945 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2946 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2947 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2949 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2950 # Note, the emulator supports many of the additional console features
2951 # listed in the iBCS2 (e.g. character-set selection) though not all
2952 # are described here. This entry really ought to be upgraded.
2953 # Also note, the console will also work with fewer lines after doing
2954 # "stty rows NN", e.g. to use 24 lines.
2955 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2956 # Bug: The <op> capability resets attributes.
2957 bsdos-pc|IBM PC BSD/OS Console,
2958 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2959 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2960 use=bsdos-pc-nobold,
2962 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2963 use=klone+color, use=bsdos-pc-m,
2965 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2966 OTbs, am, eo, km, xon,
2967 cols#80, it#8, lines#25,
2968 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2969 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2970 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2971 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2972 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2973 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2974 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2975 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2976 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2979 # Old names for BSD/OS PC console used in releases before 4.1.
2980 pc3|BSD/OS on the PC Console,
2981 use=bsdos-pc-nobold,
2982 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2985 # BSD/OS on the SPARC
2986 bsdos-sparc|Sun SPARC BSD/OS Console,
2989 # BSD/OS on the PowerPC
2990 bsdos-ppc|PowerPC BSD/OS Console,
2995 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2997 # Actually (TD pointed this out at the time the acsc string was added):
2998 # vt52 shouldn't define full acsc since most of the cells don't match.
2999 # see vt100 manual page A-31. This is the list that does match:
3008 # The line-drawing happens to work in several terminal emulators, but should
3009 # not be used as a guide to the capabilities of the vt52. Note in particular
3010 # that vt52 does not support line-drawing characters (the scan-X values refer
3011 # to a crude plotting feature) -TD
3014 cols#80, it#8, lines#24,
3015 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r,
3016 cub1=\ED, cud1=\EB, cuf1=\EC,
3017 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
3018 el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
3019 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
3021 #### DEC VT100 and compatibles
3023 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
3024 # and micro consoles can be found in the `obsolete' section. More details on
3025 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
3026 # found near the end of this file.
3028 # Except where noted, these entries are DEC's official terminfos.
3029 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
3030 # Engineering for more information. Updated terminfos and termcaps
3031 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
3033 # In October 1995 DEC sold its terminals business, including the VT and Dorio
3034 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
3035 # its name to Boundless Technologies; see http://www.boundless.com.
3038 # NOTE: Any VT100 emulation, whether in hardware or software, almost
3039 # certainly includes what DEC called the `Level 1 editing extension' codes;
3040 # only the very oldest VT100s lacked these and there probably aren't any of
3041 # those left alive. To capture these, use one of the VT102 entries.
3043 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
3044 # since the cursor is left in a different position while in the
3045 # weird state (concept at beginning of next line, vt100 at end
3046 # of this line) so all versions of vi before 3.7 don't handle
3047 # <xenl> right on vt100. The correct way to handle <xenl> is when
3048 # you output the char in column 80, immediately output CR LF
3049 # and then assume you are in column 1 of the next line. If <xenl>
3050 # is on, am should be on too.
3052 # I assume you have smooth scroll off or are at a slow enough baud
3053 # rate that it doesn't matter (1200? or less). Also this assumes
3054 # that you set auto-nl to "on", if you set it off use vt100-nam
3057 # The padding requirements listed here are guesses. It is strongly
3058 # recommended that xon/xoff be enabled, as this is assumed here.
3060 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
3061 # tab settings are in non-volatile memory and don't need to be
3062 # reset upon login. Also setting the number of columns glitches
3063 # the screen annoyingly. You can type "reset" to get them set.
3065 # The VT100 series terminals have cursor ("arrows") keys which can operate
3066 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
3067 # is the reset state, and is assumed to be the normal state. Application
3068 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
3069 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
3070 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
3071 # was provided primarily as an aid to the porting of VT52 applications. It is
3072 # assumed that the cursor keys are normally in Cursor Mode, and expected that
3073 # applications such as vi will always transmit the <smkx> string. Therefore,
3074 # the definitions for the cursor keys are made to match what the terminal
3075 # transmits after the <smkx> string is transmitted. If the <smkx> string
3076 # is a null string or is not defined, then cursor keys are assumed to be in
3077 # "Cursor Mode", and the cursor keys definitions should match that assumption,
3078 # else the application may fail. It is also expected that applications will
3079 # always transmit the <rmkx> string to the terminal before they exit.
3081 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
3082 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
3083 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
3084 # Application Mode. Numeric Mode is the reset state, and is assumed to be
3085 # the normal state. Application Mode is the "set" state. In Numeric Mode,
3086 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
3087 # Enter key transmits the same as the Return key (Note: the Return key
3088 # can be configured to send either LF (\015) or CR LF). In Application Mode,
3089 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
3090 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
3091 # is normally in Numeric Mode. If an application requires that the keypad be
3092 # in Application Mode then it is expected that the user, or the application,
3093 # will set the TERM environment variable to point to a terminfo entry which has
3094 # defined the <smkx> string to include the codes that switch the keypad into
3095 # Application Mode, and the terminfo entry will also define function key
3096 # fields to match the Application Mode control codes. If the <smkx> string
3097 # is a null string or is not defined, then the keypad is assumed to be in
3098 # Numeric Mode. If the <smkx> string switches the keypad into Application
3099 # Mode, it is expected that the <rmkx> string will contain the control codes
3100 # necessary to reset the keypad to "Normal" mode, and it is also expected that
3101 # applications which transmit the <smkx> string will also always transmit the
3102 # <rmkx> string to the terminal before they exit.
3104 # Here's a diagram of the VT100 keypad keys with their bindings.
3105 # The top line is the name of the key (some DEC keyboards have the keys
3106 # labelled somewhat differently, like GOLD instead of PF1, but this is
3107 # the most "official" name). The second line is the escape sequence it
3108 # generates in Application Keypad mode (where "$" means the ESC
3109 # character). The third line contains two items, first the mapping of
3110 # the key in terminfo, and then in termcap.
3111 # _______________________________________
3112 # | PF1 | PF2 | PF3 | PF4 |
3113 # | $OP | $OQ | $OR | $OS |
3114 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3116 # | $Ow | $Ox | $Oy | $Om |
3117 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
3119 # | $Ot | $Ou | $Ov | $Ol |
3120 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
3122 # | $Oq | $Or | $Os | enter |
3123 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
3126 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
3128 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
3129 # terminfo guidelines. That is a compromise used to assign the remaining
3130 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
3132 vt100+keypad|dec vt100 numeric keypad no fkeys,
3133 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
3134 vt100+pfkeys|dec vt100 numeric keypad,
3135 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3137 vt100+fnkeys|dec vt100 numeric keypad,
3138 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
3139 kf9=\EOw, use=vt100+pfkeys,
3141 # A better adaptation to modern keyboards such as the PC's, which have a dozen
3142 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
3143 # use the 5-key arrangement to model the arrow keys as suggested in the
3144 # terminfo guidelines:
3145 # _______________________________________
3146 # | PF1 | PF2 | PF3 | PF4 |
3147 # | $OP | $OQ | $OR | $OS |
3148 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3150 # | $Ow | $Ox | $Oy | $Om |
3151 # |_ka1__K1_|_________|_ka3__K3_|_________|
3153 # | $Ot | $Ou | $Ov | $Ol |
3154 # |_________|_kb2__K2_|_________|_________|
3156 # | $Oq | $Or | $Os | enter |
3157 # |_kc1__K4_|_________|_kc3__K5_| $OM |
3160 # |___________________|_________|_kent_@8_|
3162 vt220+keypad|dec vt220 numeric keypad,
3163 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
3164 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
3167 vt100+enq|ncurses extension for vt100-style ENQ,
3168 u8=\E[?1;2c, use=ansi+enq,
3169 vt102+enq|ncurses extension for vt102-style ENQ,
3170 u8=\E[?6c, use=ansi+enq,
3172 # And here, for those of you with orphaned VT100s lacking documentation, is
3173 # a description of the soft switches invoked when you do `Set Up'.
3175 # Scroll 0-Jump Shifted 3 0-#
3176 # | 1-Smooth | 1-British pound sign
3177 # | Autorepeat 0-Off | Wrap Around 0-Off
3179 # | | Screen 0-Dark Bkg | | New Line 0-Off
3180 # | | | 1-Light Bkg | | | 1-On
3181 # | | | Cursor 0-Underline | | | Interlace 0-Off
3182 # | | | | 1-Block | | | | 1-On
3184 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
3186 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
3187 # | | | 1-On | | | 1-50 Hz
3188 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
3189 # | | 1-ANSI | | 1-8 Bits
3190 # | Keyclick 0-Off | Parity 0-Off
3192 # Margin Bell 0-Off Parity Sense 0-Odd
3195 # The following SET-UP modes are assumed for normal operation:
3196 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
3197 # WRAP_AROUND_ON JUMP_SCROLL_OFF
3198 # Other SET-UP modes may be set for operator convenience or communication
3199 # requirements; I recommend
3200 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
3201 # Unless you have a graphics add-on such as Digital Engineering's VT640
3202 # (and even then, whenever it can be arranged!) you should set
3205 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
3206 vt100|vt100-am|dec vt100 (w/advanced video),
3207 OTbs, mc5i, xenl, xon,
3209 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
3210 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3211 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
3212 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
3214 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3215 %;m%?%p9%t\016%e\017%;$<2>,
3216 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
3217 use=vt100+4bsd, use=vt100+fnkeys,
3218 vt100+4bsd|dec vt100 from 4.0BSD,
3220 cols#80, it#8, lines#24,
3221 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3222 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
3223 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
3224 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
3225 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
3226 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
3227 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
3228 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3229 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
3230 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3231 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3232 %;m%?%p9%t\016%e\017%;$<2>,
3233 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
3234 smul=\E[4m$<2>, tbc=\E[3g,
3235 vt100nam|vt100-nam|vt100 no automargins,
3237 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
3238 vt100-vb|dec vt100 (w/advanced video) & no beep,
3239 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
3241 # Ordinary vt100 in 132 column ("wide") mode.
3242 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
3244 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
3245 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
3246 cols#132, lines#14, vt@,
3247 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
3249 # vt100 with no advanced video.
3250 vt100-nav|vt100 without advanced video option,
3252 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
3254 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
3255 cols#132, lines#14, use=vt100-nav,
3257 # vt100 with one of the 24 lines used as a status line.
3258 # We put the status line on the top.
3259 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
3262 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
3263 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
3264 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
3265 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
3267 # Status line at bottom.
3268 # Clearing the screen will clobber status line.
3269 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
3272 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
3273 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
3275 # Most of the `vt100' emulators out there actually emulate a vt102
3276 # This entry (or vt102-nsgr) is probably the right thing to use for
3279 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
3281 vt102-w|dec vt102 in wide mode,
3283 rs3=\E[?3h, use=vt102,
3285 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
3286 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
3287 # string in the canonical vt100 entry above leaves the screen littered
3288 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
3289 # after highlight turnoffs. This entry should fix that, and even leave
3290 # ACS support working, at the cost of making multiple-highlight changes
3291 # slightly more expensive.
3292 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
3293 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
3294 sgr@, sgr0=\E[m, use=vt102,
3296 # VT125 Graphics CRT. Clear screen also erases graphics
3297 # Some vt125's came configured with vt102 support.
3298 vt125|vt125 graphics terminal,
3300 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
3302 # This isn't a DEC entry, it came from University of Wisconsin.
3303 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
3306 cols#80, it#8, lines#24, vt#3,
3307 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3308 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3309 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
3310 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
3311 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
3312 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3313 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3314 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3315 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3317 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3318 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3319 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3321 # vt132 - like vt100 but slower and has ins/del line and such.
3322 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3323 # manual and from the ANSI standard, this describes the actual
3324 # terminal. I've never actually used a vt132 myself, so this
3329 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3330 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3332 # This vt220 description maps F5--F9 to the second block of function keys
3333 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3334 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3335 # PF1--PF4 are used as F1--F4.
3338 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3339 OTbs, OTpt, am, mir, msgr, xenl, xon,
3340 cols#80, lines#24, vt#3,
3342 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3343 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3344 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3345 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3346 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3347 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3348 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3349 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3350 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3351 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3352 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3353 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3354 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3355 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3356 rmso=\E[27m, rmul=\E[24m,
3357 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3358 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3359 %p9%t\E(0%e\E(B%;$<2>,
3360 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3361 smso=\E[7m, smul=\E[4m,
3363 # A much better description of the VT200/220; used to be vt220-8
3364 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3365 # designation to accommodate bug in pcvt -TD
3367 # Here's a picture of the VT220 editing keypad:
3368 # +--------+--------+--------+
3369 # | Find | Insert | Remove |
3370 # +--------+--------+--------+
3371 # | Select | Prev | Next |
3372 # +--------+--------+--------+
3373 vt220|vt200|dec vt220,
3374 OTbs, am, mir, msgr, xenl, xon,
3375 cols#80, it#8, lines#24, vt#3,
3376 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3377 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3378 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3379 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3380 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3381 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3382 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3383 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3384 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3385 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3386 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3387 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3388 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3389 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3390 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3391 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3392 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3393 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3394 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3395 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3397 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3398 %p9%t\E(0%e\E(B%;$<2>,
3399 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3400 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3402 vt220-w|vt200-w|DEC vt220 in wide mode,
3404 rs3=\E[?3h, use=vt220,
3405 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3406 OTbs, am, mc5i, mir, msgr, xenl, xon,
3407 cols#80, it#8, lines#24, vt#3,
3408 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3409 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
3410 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3411 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
3412 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3413 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3414 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3415 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3416 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3417 il=\233%p1%dL, il1=\233L, ind=\ED,
3418 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3419 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3420 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3421 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3422 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3423 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3424 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3425 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3426 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3427 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3428 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3429 rmul=\23324m, rs1=\233?3l, sc=\E7,
3430 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
3431 %?%p9%t\E(0%e\E(B%;$<2>,
3432 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3433 smso=\2337m, smul=\2334m, tbc=\2333g,
3436 # This vt220 description regards F6--F10 as the second block of function keys
3437 # at the top of the keyboard. This mapping follows the description given
3438 # in the VT220 Programmer Reference Manual and agrees with the labeling
3439 # on some terminals that emulate the vt220. There is no support for an F5.
3440 # See vt220 for an alternate mapping.
3442 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3443 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3444 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3445 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3446 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3448 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3450 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3452 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3453 # (not an official DEC entry!)
3454 # The problem with real vt220 terminals is they don't send escapes when in
3455 # in vt220 mode. This can be gotten around two ways. 1> don't send
3456 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3457 # features of vt100 advanced video which it then has.
3459 # This entry takes the view of putting a vt220 into vt100 mode so
3460 # you can use the escape key in emacs and everything else which needs it.
3462 # You probably don't want to use this on a VMS machine since VMS will think
3463 # it has a vt220 and will get fouled up coming out of emacs
3465 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3466 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3468 vt200-js|vt220-js|dec vt200 series with jump scroll,
3471 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3472 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3473 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3474 ht=^I, il1=\E[L, ind=\ED,
3475 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
3477 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3478 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
3479 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3480 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3481 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3482 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3484 # This was DEC's vt320. Use the purpose-built one below instead
3485 #vt320|DEC VT320 in vt100 emulation mode,
3488 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3490 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3492 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3494 # These entries are not DEC's official ones, they were purpose-built for the
3495 # VT320. Here are the designer's notes:
3496 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3497 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3498 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3499 # Things that use <knxt> usually use tab anyways... and things that don't use
3500 # tab usually use <knxt> instead...
3501 # kprv is same as tab - Backtab is useless...
3502 # I left out <sgr> because of its RIDICULOUS complexity,
3503 # and the resulting fact that it causes the termcap translation of the entry
3504 # to SMASH the 1k-barrier...
3505 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3506 # (vt320: uncommented <fsl> --esr)
3507 vt320|vt300|dec vt320 7 bit terminal,
3508 am, hs, mir, msgr, xenl,
3509 cols#80, lines#24, wsl#80,
3510 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3511 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3512 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
3513 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3514 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3515 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3516 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3517 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3518 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3519 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3520 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3521 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3522 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3523 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3524 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3525 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3526 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3527 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3528 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3530 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3532 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3533 %p9%t\E(0%e\E(B%;$<2>,
3534 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3535 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3536 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3537 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3539 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3540 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
3541 # We have to init 132-col mode, not 80-col mode.
3542 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3544 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3545 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
3546 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3548 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3549 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
3551 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3552 # which are pretty much a superset of the VT320. They have the
3553 # host writable status line, yet another different DRCS matrix size,
3554 # and such, but they add the DEC Technical character set, Multiple text
3555 # pages, selectable length pages, and the like. The difference between
3556 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3557 # monitor, the former has 4 planes and a color monitor. These terminals
3558 # support VT131 and ANSI block mode, but as with much of these things,
3559 # termcap/terminfo doesn't deal with these features.
3561 # Note that this entry is are set up in what was the standard way for GNU
3562 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3563 # keys were switched into application mode at the same time the numeric pad
3564 # is switched into application mode. This changes the definitions of the
3565 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3566 # your termcap or terminfo entry,
3568 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3569 # (vt340: string capability "sb=\E[M" corrected to "sr";
3570 # also, added <rmam>/<smam> based on the init string -- esr)
3571 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3572 am, eslok, hs, mir, msgr, xenl, xon,
3573 cols#80, it#8, lines#24, vt#3,
3574 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3575 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3576 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3577 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
3578 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3579 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3580 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3581 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3582 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3584 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3586 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3587 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3588 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3589 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3590 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3591 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3592 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3593 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3594 %p9%t\E(0%e\E(B%;$<2>,
3595 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3596 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3597 tsl=\E[2$~\E[1$}\E[1;%dH,
3599 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3600 # (originally written with vt420 as its primary name, and usable for it).
3602 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3603 # text pages and long text pages with selectable length of the vt340, along
3604 # with left and right margins, rectangular area text copy, fill, and erase
3605 # operations, selected region character attribute change operations,
3606 # page memory and rectangle checksums, insert/delete column, reception
3607 # macros, and other features too numerous to remember right now. TERMCAP
3608 # can only take advantage of a few of these added features.
3610 # Note that this entry is are set up in what was the standard way for GNU
3611 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3612 # keys were switched into application mode at the same time the numeric pad
3613 # is switched into application mode. This changes the definitions of the
3614 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3615 # your termcap entry,
3617 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3618 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3619 # also, added <rmam>/<smam> based on the init string -- esr)
3620 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3621 am, eslok, hs, mir, msgr, xenl, xon,
3622 cols#80, it#8, lines#24, vt#3,
3623 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3624 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3625 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
3626 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3627 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3628 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3629 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3630 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3631 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3632 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3633 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3634 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3636 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3637 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3638 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3639 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3640 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3641 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3642 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3643 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3644 %p9%t\E(0%e\E(B%;$<2>,
3645 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3646 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3647 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3649 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3650 # a missing <sc> -- esr)
3651 # add msgr and other capabilities from vt220 -TD
3653 am, mir, msgr, xenl, xon,
3654 cols#80, it#8, lines#24, vt#3,
3655 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3656 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3657 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3658 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3659 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3660 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3661 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3662 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3663 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3664 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3665 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3666 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3667 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3668 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3669 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3670 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3671 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3672 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3673 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3674 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3675 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3676 %p9%t\E(0%e\E(B%;$<2>,
3677 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3678 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3679 use=ansi+pp, use=dec+sl, use=ansi+enq,
3681 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3682 # takes two parameters, the key and the string. Translating the key is
3683 # straightforward (keys 1-5 are not defined on real terminals, though some
3684 # emulators define these):
3686 # if (key < 16) then value = key;
3687 # else if (key < 21) then value = key + 1;
3688 # else if (key < 25) then value = key + 2;
3689 # else if (key < 27) then value = key + 3;
3690 # else if (key < 30) then value = key + 4;
3691 # else value = key + 5;
3693 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3694 # There's no provision in terminfo for emitting a string in this format, so the
3695 # application has to know it.
3697 vt420pc|DEC VT420 w/PC keyboard,
3698 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3699 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3700 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
3701 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
3702 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
3703 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
3704 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
3705 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
3706 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
3707 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
3708 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
3709 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
3710 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3711 pctrm=USR_TERM\:vt420pcdos\:,
3712 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3713 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3717 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3719 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3720 %{127}%=%t\E\177%e%p1%c%;,
3722 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3723 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3725 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3726 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3727 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3728 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3729 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3730 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3731 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3736 vt510pc|DEC VT510 w/PC keyboard,
3738 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3743 # The VT520 is a monochrome text terminal capable of managing up to
3744 # four independent sessions in the terminal. It has multiple ANSI
3745 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3746 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3747 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3749 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3750 # [Alt]/[Print Screen] depending upon which keyboard and which
3751 # terminal mode is being used. If Set-Up has been disabled or
3752 # assigned to an unknown key, Set-Up may be entered by pressing
3753 # [F3] as the first key after power up, regardless of keyboard type.
3755 use=ansi+rca, use=vt420, use=ansi+tabs,
3760 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3761 # Keyboard, which replaces the old LK41R-AA keyboard.
3763 # In trying to get the function keys to work, I had to cobble my own
3764 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3765 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3766 # I seem to get them all -Mike Gran
3767 vt520ansi|Boundless VT520 ANSI,
3768 use=ansi+rca, use=vt420f, use=vt220+keypad,
3771 #### VT100 emulations
3774 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3775 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3776 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3777 # that this works best with a stock vt100 entry.
3778 dec-vt100|EWAN telnet's vt100 emulation,
3781 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3782 dec-vt220|DOS tnvt200 terminal emulator,
3785 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3786 # anyone who needs PC VT340 emulation. (or anything below that level, for
3787 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3788 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3789 # I can send the address if requested.
3790 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3791 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3792 z340|zstem vt340 terminal emulator 132col 42line,
3794 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3795 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3796 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3798 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3799 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3801 # CRT is shareware. It implements some xterm features, including mouse.
3802 crt|crt-vt220|CRT 2.3 emulating VT220,
3805 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3807 # PuTTY 0.55 (released 3 August 2004)
3808 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3810 # Comparing with 0.51, vttest is much better (only a few problems with the
3811 # cursor position reports and wrapping).
3813 # PuTTY 0.51 (released 14 December 2000)
3815 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3816 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3817 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3818 # to xterm, which is incorrect, since several features are misimplemented:
3820 # Alt+key always sends ESC+key, so 'km' capability is removed.
3822 # Control responses, wrapping and tabs are buggy, failing a couple of
3823 # screens in vttest.
3825 # xterm mouse support is not implemented (unrelease version may).
3827 # Several features such as backspace/delete are optional; this entry documents
3828 # the default behavior -TD
3830 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
3831 # but implements it incorrectly as mentioned here:
3832 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
3833 putty|PuTTY terminal emulator,
3834 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3835 colors#8, it#8, ncv#22, pairs#64, U8#1,
3836 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3837 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3838 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3839 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3840 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3841 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3842 dch=\E[%p1%dP, dch1=\E[P,
3843 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3844 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3845 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3846 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3847 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3848 %%G\340\202\242\E%%@%e%p1%c%;,
3849 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3850 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3851 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3852 il1=\E[L, ind=\n, indn=\E[%p1%dS,
3853 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3854 %02x%p4%{255}%*%{1000}%/%02x,
3855 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3856 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z,
3857 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3858 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3859 kind=\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[A,
3860 kspd=^Z, nel=\r\n, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3861 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3862 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmkx=\E[?1l\E>,
3863 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3864 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3865 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3866 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3867 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3868 %;m%?%p9%t\016%e\017%;,
3869 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3870 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3871 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3872 use=putty+fnkeys, use=vt102+enq, use=xterm+sl,
3873 vt100-putty|Reset PuTTY to pure vt100,
3874 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3876 putty-256color|PuTTY 0.58 with xterm 256-colors,
3877 use=xterm+256setaf, use=putty,
3878 putty-noapp|putty with cursor keys in normal mode,
3879 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3880 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3883 # One of the keyboard selections is "VT100+".
3884 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3885 putty-vt100|VT100+ keyboard layout,
3886 use=putty+fnkeys+vt100, use=putty,
3888 putty-sco|putty with SCO function keys,
3889 use=putty+fnkeys+sco, use=putty,
3891 # PuTTY has more than one section in its Keyboard configuration:
3892 # a) backspace/delete, which we ignore since that choice largely depends on
3893 # whether one matches Unix and BSD or Linux.
3894 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3895 # are unrelated to rxvt's actual settings.
3896 # c) function keys and keypad - this is the interesting part. None of the
3897 # selections match any of their respective namesakes, but they are shown
3898 # here to help users who expect that the selections do what is implied.
3900 # This is the default setting for PuTTY
3901 putty+fnkeys|fn-keys for PuTTY,
3902 use=putty+fnkeys+esc,
3904 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3905 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3906 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3907 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3908 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3909 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3911 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3912 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3913 use=putty+fnkeys+esc,
3915 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3916 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3917 use=putty+fnkeys+esc,
3919 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3920 use=putty+fnkeys+esc,
3922 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3924 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3925 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3926 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3927 kf9=\EOX, use=putty+fnkeys+esc,
3929 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3931 # Use modifiers to obtain function keys past 12:
3934 # F25-F36 - control/alt
3935 # F37-F48 - control/shift
3937 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3938 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3939 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3940 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3941 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3942 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3943 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3944 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3945 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3946 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3947 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3948 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3949 kich1=\E[L, knp=\E[G, kpp=\E[I,
3951 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3952 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3953 # (communication program) which supports:
3955 # - Serial port connections.
3956 # - TCP/IP (telnet) connections.
3957 # - VT100 emulation, and selected VT200/300 emulation.
3958 # - TEK4010 emulation.
3959 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3961 # - Scripts using the "Tera Term Language".
3962 # - Japanese and Russian character sets.
3964 # The program does not come with terminfo or termcap entries. However, the
3965 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3966 # vt52 or doublesize character support; blinking is done with color). Besides
3967 # the HPA, VPA extensions it also implements CPL and CNL.
3969 # All of the function keys can be remapped. This description shows the default
3970 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3971 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3972 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3980 # ANSI colors are implemented, but cannot be combined with video attributes
3981 # except for reverse.
3983 # No fonts are supplied with the program, so the acsc string is chosen to
3984 # correspond with the default Microsoft terminal font.
3986 # Tera Term recognizes some xterm sequences, including those for setting and
3987 # retrieving the window title, and for setting the window size (i.e., using
3988 # "resize -s"), though it does not pass SIGWINCH to the application if the
3989 # user resizes the window with the mouse.
3990 teraterm2.3|Tera Term Pro,
3993 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3994 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3995 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3996 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3997 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3998 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3999 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4000 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
4001 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
4002 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4003 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4004 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4005 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4006 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4007 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
4008 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4009 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
4010 use=klone+color, use=vt100,
4012 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
4013 # to choose a Windows OEM font).
4015 # Testing with tack:
4016 # - it does not have xenl (suppress that)
4017 # - underline seems to work with color (modify ncv).
4018 # Testing with vttest:
4019 # - wrapping differs from vt100 (menu 1).
4020 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4022 # - it recognizes the dtterm window controls for reporting size in
4023 # characters and pixels.
4024 # - it passes SIGWINCH.
4025 teraterm4.59|Tera Term Pro,
4028 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4029 kmous=\E[M, use=teraterm2.3,
4033 # Testing with tack:
4034 # - no bell (flash works)
4035 # - bold is yellow, blink is red.
4036 # - default keyboard sends ^? for Delete, can be configured for kdch1
4038 # Testing with vttest:
4039 # + autowrap has problems...
4040 # + color-tests for bce feature match xterm's behavior
4041 # + handles most of xterm's mouse-controls other than highlight-tracking.
4042 # xterm's SGR 1006 works.
4043 # + partial support for DEC locator-events
4044 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4045 # + has a "Tek" window, but does not work with vttest's examples
4046 # + supports the dtterm window modify/report controls
4047 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4049 # + VT220 screen-display tests are ok
4052 # + recognizes xterm's original direct-colors sequences, but result is
4054 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4055 teraterm4.97|Tera Term Pro,
4056 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4057 teraterm-256color|TeraTerm with xterm 256-colors,
4058 use=xterm+256setaf, use=teraterm,
4063 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4064 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4067 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4068 # for casual (occasional) use. Also fails several of the vttest screens,
4069 # but that is not unusual for vt100 "emulators".
4070 # b) Does not implement vt100 keypad
4071 # c) Recognizes a subset of vt52 controls.
4072 ms-vt100|MS telnet imitating dec vt100,
4074 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4075 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4076 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4077 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4078 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4080 # Tested with Windows 2000, the telnet application runs in a console window,
4081 # also using 'Terminal' font.
4084 # a) This version has no function keys or numeric keypad. Unlike the older
4085 # version, the numeric keypad is entirely ignored.
4086 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4087 ms-vt100-color|vtnt|windows 2000 ansi (sic),
4089 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4092 # Based on comments from Federico Bianchi:
4094 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4095 # scheme for PF keys.
4097 # and PuTTY wishlist:
4099 # The modifiers are represented as the codes listed above, prefixed to
4100 # the normal sequences. If the modifier is pressed alone, its sequence
4101 # is transmitted twice in succession. If multiple modifiers apply,
4102 # they're transmitted in the order shift, control, alt.
4107 ms-vt100+|vt100+|windows XP vt100+ (sic),
4108 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4109 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4110 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4111 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4112 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4113 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4114 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4115 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4116 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4117 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4118 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4119 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4120 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4121 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4122 knp=\E/, kpp=\E?, use=ms-vt100-color,
4124 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
4127 # expect-5.44.1.15/example/tkterm
4128 # a minimal subset of a vt100 (compare with "news-unk).
4130 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
4131 tt|tkterm|Don Libes' tk text widget terminal emulator,
4132 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
4133 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
4134 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
4135 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
4138 ######## X TERMINAL EMULATORS
4141 # You can add the following line to your .Xdefaults to change the terminal type
4142 # set by the xterms you start up to my-xterm:
4144 # *termName: my-xterm
4146 # System administrators can change the default entry for xterm instances
4147 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4148 # case, xterm will detect and reject an invalid terminal type, falling back
4149 # to the default of xterm.
4152 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4153 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4154 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4155 # as these seem not to work -- esr)
4156 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4157 OTbs, am, km, mir, msgr, xenl, xon,
4158 cols#80, it#8, lines#65,
4159 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4160 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4161 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4162 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4163 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4164 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4165 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4166 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4167 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4168 smso=\E[7m, smul=\E[4m,
4169 # Compatible with the R5 xterm
4170 # (from the XFree86 3.2 distribution, <blink=@> removed)
4171 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4172 # corrected typos in rs2 string - TD
4174 xterm-r5|xterm R5 version,
4175 OTbs, am, km, msgr, xenl,
4176 cols#80, it#8, lines#24,
4177 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4178 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4179 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4180 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4181 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4182 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4183 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
4184 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~,
4185 kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~,
4186 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
4187 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
4188 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~,
4189 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4190 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4191 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4193 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4195 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4196 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=xterm+kbs,
4197 # Compatible with the R6 xterm
4198 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4199 # added khome/kend, hts based on the R6 xterm code - TD
4200 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4201 # for compatibility with other emulators).
4202 xterm-r6|xterm X11R6 version,
4203 OTbs, am, km, mir, msgr, xenl,
4204 cols#80, it#8, lines#24,
4205 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4206 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4207 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4208 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4209 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4210 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4211 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4213 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4214 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4215 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4216 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4217 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4218 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4219 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4220 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4221 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
4222 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
4223 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4224 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4225 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4226 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4227 use=xterm+kbs, use=vt100+enq,
4228 xterm-old|antique xterm version,
4230 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4231 # The name has been changed and some aliases have been removed.
4232 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4233 OTbs, am, bce, km, mir, msgr, xenl, XT,
4234 cols#80, it#8, lines#24, ncv@,
4235 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4236 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4237 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
4238 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4239 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4240 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4241 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4242 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4243 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4244 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4246 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4247 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4248 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4249 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4250 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4251 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4252 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4253 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
4254 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
4255 ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
4256 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4257 rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
4259 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4261 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4263 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4264 %;m%?%p9%t\016%e\017%;,
4265 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4266 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4267 tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
4268 use=ecma+color, use=vt220+keypad,
4270 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4271 # codes for F1-F4 except while in VT220 mode.
4272 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4273 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4275 # This version was released in XFree86 3.3.3 (November 1998).
4276 # Besides providing printer support, it exploits a new feature that allows
4277 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4278 # -- the distribution contained incorrect khome/kend values -TD
4279 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4280 blink=\E[5m, ich1@, invis=\E[8m,
4281 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4282 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4283 rs2=\E[!p\E[?3;4l\E[4l\E>,
4284 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4285 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4286 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4289 # This version was released in XFree86 4.0.
4290 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4292 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4293 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4294 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4295 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4296 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4297 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4298 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4299 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4300 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4301 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4302 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4303 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4304 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4305 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
4306 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4308 smcup=\E[?1049h, use=xterm-xf86-v333,
4310 # This version was released in XFree86 4.3.
4311 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4312 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4313 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4315 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4316 %p7%t;8%;m%?%p9%t\016%e\017%;,
4319 # This version was released in XFree86 4.4.
4320 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4321 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
4322 rin=\E[%p1%dT, use=xterm-xf86-v43,
4324 xterm-xfree86|xterm terminal emulator (XFree86),
4327 # This version reflects the current xterm features.
4328 xterm-new|modern xterm terminal emulator,
4330 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
4331 rin=\E[%p1%dT, use=ansi+rep, use=ecma+strikeout,
4332 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4335 # This fragment is for people who cannot agree on what the backspace key
4337 xterm+kbs|fragment for backspace key,
4340 # This fragment describes as much of XFree86 xterm's "pc-style" function
4341 # keys as will fit into terminfo's 60 function keys.
4344 # ---------------------------------
4351 # 8 Shift + Alt + Control
4352 # ---------------------------------
4353 # The meta key may also be used as a modifier in this scheme, adding another
4354 # bit to the parameter.
4355 xterm+pcfkeys|fragment for PC-style fkeys,
4356 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4359 xterm+noapp|fragment with cursor keys in normal mode,
4360 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4363 xterm+app|fragment with cursor keys in application mode,
4364 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4367 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4368 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4369 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4371 # The original assignments from patch #94 for cursor-keys had some technical
4374 # A parameter for a function-key to represent a modifier is just more
4375 # bits. But for a cursor-key it may change the behavior of the
4376 # application. For instance, emacs decodes the first parameter of a
4377 # cursor-key as a repeat count.
4379 # A parameterized string should (really) not begin with SS3 (\EO).
4380 # Rather, CSI (\E[) should be used.
4382 # For these reasons, the original assignments were deprecated. For
4383 # compatibility reasons, they are still available as a setting of xterm's
4384 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4385 # that might apply to xterm+pcfkeys with different values of that resource.
4387 # These entries will have warnings when checking with tic because the kri/kind
4388 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
4389 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
4390 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
4392 # * modify xterm-new terminfo entry to use capabilities for shifted
4393 # scroll forward/reverse as shifted cursor up/down.
4395 # In the 1980s when terminfo was defined, the developers made more of
4396 # a distinction between shifted up/down versus shifted left/right since most
4397 # terminals can index (scroll up/down), while few can scroll left/right.
4398 xterm+pcc3|fragment with modifyCursorKeys:3,
4399 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4400 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4401 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4402 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4403 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4404 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4405 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4406 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4409 xterm+pcc2|fragment with modifyCursorKeys:2,
4410 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4411 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4412 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4413 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4414 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4415 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4416 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4418 xterm+pcc1|fragment with modifyCursorKeys:1,
4419 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4420 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4421 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4422 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4423 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4424 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4426 xterm+pcc0|fragment with modifyCursorKeys:0,
4427 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4428 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4429 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4430 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4431 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4432 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4435 # Here are corresponding fragments from xterm patch #216:
4437 xterm+pcf0|fragment with modifyFunctionKeys:0,
4438 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4439 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4440 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4441 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4442 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4443 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4444 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4445 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4446 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4447 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4448 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4449 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4450 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4451 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4452 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4453 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4454 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4456 xterm+pcf2|fragment with modifyFunctionKeys:2,
4457 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4458 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4459 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4460 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4461 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4462 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4463 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4464 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4465 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4466 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4467 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4468 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4469 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4470 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4471 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4472 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4473 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4474 kf8=\E[19~, kf9=\E[20~,
4476 # Chunks from xterm #230:
4477 xterm+pce2|fragment with modifyCursorKeys:2,
4478 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4479 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4480 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4481 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4482 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4483 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4484 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4485 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4486 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4487 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4488 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4491 xterm+edit|fragment for 6-key editing-keypad,
4492 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4495 xterm+pc+edit|fragment for pc-style editing keypad,
4496 kend=\E[4~, khome=\E[1~,
4498 xterm+vt+edit|fragment for vt220-style editing keypad,
4499 kfnd=\E[1~, kslt=\E[4~,
4501 # These variations for alternate-screen and title-stacking were introduced by
4503 xterm+noalt|xterm without altscreen,
4506 xterm+alt1049|xterm 90 feature,
4507 rmcup=\E[?1049l, smcup=\E[?1049h,
4509 xterm+titlestack|xterm 251 feature,
4510 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
4512 xterm+alt+title|xterm 90 and 251 features combined,
4513 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
4515 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4516 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4517 # is shown here (because that is used in mrxvt and mlterm):
4518 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4519 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4520 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4521 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4522 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4523 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4524 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4525 kf63=\E[13;4~, use=xterm+pcf2,
4527 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4528 xterm-basic|modern xterm terminal emulator - common,
4529 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4530 colors#8, cols#80, it#8, lines#24, pairs#64,
4531 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4532 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4533 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
4534 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4535 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4536 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4537 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4538 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4539 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4540 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4541 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
4542 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4543 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4544 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
4545 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4546 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
4548 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4550 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4552 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
4553 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4554 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
4555 smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m,
4556 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=ecma+italics,
4557 use=ansi+pp, use=xterm+kbs, use=xterm+alt+title,
4560 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4561 # In retrospect, something like xterm-r6 was intended here -TD
4562 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4563 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4567 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
4570 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4571 # xterm also recognizes the control sequences for initc -TD
4572 xterm-16color|xterm with 16 colors like aixterm,
4574 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4575 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4576 oc=\E]104\007, rs1=\Ec\E]104\007, use=ibm+16color,
4579 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4580 # xterm patch #111 (1999/7/10) -TD
4581 xterm+256color|xterm 256-color feature,
4583 colors#0x100, pairs#0x10000,
4584 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4585 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4587 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4589 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4593 # palette is hardcoded...
4594 xterm+256setaf|xterm 256-color (set-only),
4596 colors#0x100, pairs#0x10000,
4597 initc@, op=\E[39;49m,
4598 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4600 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4604 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4605 # xterm patch #115 (1999/9/18) -TD
4607 # Note that the escape sequences used are the same as for 256-colors - xterm
4608 # has a different table of default color resource values. If built for
4609 # 256-colors, it can still handle an 88-color palette by using the initc
4612 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4613 # which support the xterm+256color feature support the associated initc
4614 # capability. So it is cancelled in the entries which use this and/or the
4615 # xterm+256color block.
4617 # The default color palette for the 256- and 88-colors are different. A
4618 # given executable will have one palette (perhaps compiled-in). If the program
4619 # supports xterm's control sequence, it can be programmed using initc.
4620 xterm+88color|xterm 88-color feature,
4621 colors#88, pairs#7744, use=xterm+256color,
4623 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4624 xterm-256color|xterm with 256 colors,
4625 rs1=\Ec\E]104\007, use=xterm+256color, use=xterm-new,
4626 xterm-88color|xterm with 88 colors,
4627 rs1=\Ec\E]104\007, use=xterm+88color,
4630 # Emacs 26.1 and later support direct color mode in terminals, using a
4631 # combination of user-defined capabilities and ncurses-dependent function
4632 # calls. We will not include that here.
4634 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
4635 # is of interest only to the numerically illiterate), is compatible with other
4636 # terminal descriptions written for curses. It relies upon the extended range
4637 # for numeric capabilities provided in ncurses 6.1:
4638 xterm+direct2|xterm with direct-color indexing,
4640 colors#0x1000000, pairs#0x10000,
4641 initc@, op=\E[39;49m,
4642 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:%p1%{65536}%/%d\:%p1
4643 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4644 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:%p1%{65536}%/%d\:%p1
4645 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4647 xterm-direct2|xterm with direct-color indexing (old),
4648 use=xterm+direct2, use=xterm+titlestack, use=xterm,
4650 # That in turn had a problem: in the original patch submitted for KDE konsole
4651 # in 2006, the submitter and the developer alike overlooked a "color space
4652 # identifier" parameter. This version provides for that parameter:
4653 xterm+direct|xterm with direct-color indexing,
4655 colors#0x1000000, pairs#0x10000,
4656 initc@, op=\E[39;49m,
4657 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1
4658 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4659 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1
4660 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4662 xterm-direct|xterm with direct-color indexing,
4663 use=xterm+direct, use=xterm,
4665 # Here are corresponding flavors for terminals which could use the feature:
4666 iterm2-direct|iTerm2 with direct-color indexing,
4667 use=xterm+direct, use=iterm2,
4668 mlterm-direct|mlterm with direct-color indexing,
4669 use=xterm+direct, use=mlterm,
4671 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
4672 # that xterm's original implementation should have used colons for the
4673 # subparameter separators, but chose not to correct this in konsole. As of
4674 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
4675 xterm+indirect|xterm with direct-color indexing (old),
4677 colors#0x1000000, pairs#0x10000,
4678 initc@, op=\E[39;49m,
4679 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
4680 %/%{255}%&%d;%p1%{255}%&%d%;m,
4681 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
4682 %/%{255}%&%d;%p1%{255}%&%d%;m,
4684 konsole-direct|konsole with direct-color indexing,
4685 use=xterm+indirect, use=konsole,
4686 st-direct|st with direct-color indexing,
4687 use=xterm+indirect, use=st,
4688 vte-direct|vte with direct-color indexing,
4689 use=xterm+indirect, use=vte,
4692 # + Apple's Terminal.app does not recognize either form of the direct-color
4694 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
4695 # the colors. Like vte, it is a subset of xterm, although different
4696 # omissions/reservations of modified-keys are seen in testing.
4697 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
4698 # nothing useful with the colors.
4699 # + Teraterm 4.97, like PuTTY (no good).
4700 # + terminology 0.91 recognizes xterm's original implementation, but does
4701 # nothing useful with it.
4705 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4706 # asked for some of xterm's advanced features to be added to its terminfo
4707 # entry. It defines extended capabilities not found in standard terminfo or
4708 # termcap. These are useful in tmux, for instance, hence the name.
4710 # One caveat in adding extended capabilities in ncurses is that if the names
4711 # are longer than two characters, then they will not be visible through the
4712 # termcap interface.
4714 # Ms modifies the selection/clipboard. Its parameters are
4715 # p1 = the storage unit (clipboard, selection or cut buffer)
4716 # p2 = the base64-encoded clipboard content.
4718 # Ss is used to set the cursor style as described by the DECSCUSR
4719 # function to a block or underline.
4720 # Se resets the cursor style to the terminal power-on default.
4722 # Cs and Cr set and reset the cursor colour.
4723 xterm+tmux|advanced xterm features used in tmux,
4724 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4725 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4727 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4728 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4729 # To use it, your decTerminalID resource must be set to 200 or above.
4736 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4737 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4738 colors#8, cols#80, it#8, lines#24, pairs#64,
4739 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4740 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4741 civis=\233?25l, clear=\233H\2332J,
4742 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
4743 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
4744 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4745 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4746 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4747 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4748 flash=\233?5h$<100/>\233?5l, home=\233H,
4749 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4750 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
4751 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4753 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4754 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4755 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4756 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4757 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4758 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4759 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4760 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4761 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4762 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4763 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4764 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4765 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4767 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4769 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4770 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4771 %{6}%=%t3%e%p1%d%;m,
4772 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4773 %{6}%=%t3%e%p1%d%;m,
4774 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4775 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4776 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4777 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4778 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4779 u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
4780 vpa=\233%i%p1%dd, use=xterm+kbs,
4782 xterm-hp|xterm with hpterm function keys,
4783 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4784 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4785 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4786 knp=\ES, kpp=\ET, use=xterm-basic,
4788 xterm-sco|xterm with SCO function keys,
4789 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4790 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4791 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4792 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4793 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4794 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4795 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4796 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4797 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4798 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4799 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4800 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4803 # The xterm-new description has all of the features, but is not completely
4804 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4805 # sunKeyboard resource to true:
4806 # + maps the editing keypad
4807 # + interprets control-function-key as a second array of keys, so a
4808 # 12-fkey keyboard can support vt220's 20-fkeys.
4809 # + maps numeric keypad "+" to ",".
4810 # + uses DEC-style control sequences for the application keypad.
4812 xterm-vt220|xterm emulating vt220,
4813 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4814 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4815 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4816 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4817 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4818 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4819 use=xterm+app, use=xterm+edit, use=xterm-basic,
4822 xterm-vt52|xterm emulating dec vt52,
4823 cols#80, it#8, lines#24,
4824 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4825 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
4826 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4827 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4828 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
4831 xterm-noapp|xterm with cursor keys in normal mode,
4832 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4835 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4836 lines#24, use=xterm-old,
4838 # This is xterm for ncurses.
4839 xterm|xterm terminal emulator (X Window System),
4842 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4843 # setting the vt100Graphics resource to false.
4844 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4847 # These building-blocks allow access to the X titlebar and icon name as a
4848 # status line. There are a few problems in using them in entries:
4850 # a) tsl should have a parameter to denote the column on which to transfer to
4852 # b) the "0" code for xterm updates both icon-title and window title. Some
4853 # window managers such as twm (and possibly window managers descended from
4854 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4855 # don't want to mess with icon-name when using those window managers.
4857 # The extension "TS" is preferable, because it does not accept a parameter.
4858 # However, if you are using a non-extended terminfo, "TS" is not visible.
4859 xterm+sl|access X title line and icon name,
4861 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4862 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4864 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4866 # In contrast, this block can be used for a DEC vt320 and up. There are two
4869 # DECSASD (select active status display)
4870 # \E[0$} Main display
4871 # \E[1$} Status line
4873 # DECSSDT (select status line type)
4874 # \E[0$~ No status line
4875 # \E[1$~ Indicator status line
4876 # \E[2$~ Host-writable status line
4878 # The building block assumes that the terminal always shows something at the
4879 # status line (either the indicator, or status line). That is because if no
4880 # status line is used, then the terminal makes that line part of the user
4881 # window, changing its size without notice.
4883 # Because there is no "esl" (enable status line) capability, the "tsl"
4884 # capability ensures that the status line is host-writable. A DEC terminal
4885 # will clear the status line when changing from indicator to host-writable
4888 # Once on the status line, the row part of cursor addressing is ignored. Since
4889 # tsl expects a parameter (to specify the column), the shortest addressing that
4890 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4892 dec+sl|DEC VTxx status line,
4894 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4897 # The following xterm variants don't depend on your base version
4899 # xterm with bold instead of underline
4900 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4901 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
4903 smso=\E[7m, smul=\E[1m, use=xterm-old,
4905 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4906 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4907 ich@, ich1@, use=xterm,
4908 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4909 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4910 rmcup@, smcup@, use=xterm,
4913 # The xterm mouse protocol is used by other terminal emulators.
4914 # In this section, two extended capabilities are used to illustrate the mouse
4915 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
4916 # enabling/disabling other mouse protocols. The "xm" capability describes the
4917 # mouse response; currently there is no interpreter which would use this
4918 # information to make the mouse support completely data-driven.
4920 # Here is the "original" xterm mouse protocol.
4922 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
4923 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
4924 # sequence", referring to the fact that it does not correspond to a "real"
4925 # terminal. The mouse responses for the X10 protocol are sent only for
4927 xterm+x10mouse|X10 xterm mouse protocol,
4928 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
4929 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
4930 xterm-x10mouse|X10 xterm mouse,
4931 use=xterm+x10mouse, use=xterm,
4933 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
4936 # The mouse responses for the X11 protocol covered button releases, as well as
4939 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
4942 # The modifiers are not reflected in this description because as used in xterm
4943 # they are normally inaccessible because the translations resources assign
4944 # shift and control to other features. However, they are important because
4945 # they take up space in the first byte of the response. The other bits of this
4946 # byte are used to encode the button number for both presses and releases.
4947 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
4948 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
4949 # provide additional features, e.g., wheel mouse.
4951 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
4952 # "t" or "T", which was activated by double-clicking. The "t" response was
4953 # used when the starting/ending positions were the same.
4955 # X11R3 (February 1988) added the highlight/tracking mode.
4957 # X11R4 (December 1989) added the control sequences document, listing the
4958 # control sequences for the X10/X11 protocols without descriptions. It also
4959 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
4960 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
4962 # X11R5 (November 1993) gave a description of the mouse protocol.
4964 # X11R6 (January 1995) moved the control sequences document out of the xterm
4965 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
4966 # no new information.
4967 xterm+x11mouse|X11 xterm mouse protocol,
4968 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
4969 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
4970 xterm-x11mouse|X11 mouse,
4971 use=xterm+x11mouse, use=xterm,
4973 # Here is a suggested description of the xterm highlighting protocol.
4974 # A more complicated example could be constructed to account for the "t"
4976 xterm+x11hilite|X11 xterm mouse protocol with highlight,
4977 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
4978 xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c
4980 xterm-x11hilite|X11 mouse with highlight,
4981 use=xterm+x11mouse, use=xterm,
4983 # The preceding were the sources from X Consortium. Other sources (or patches)
4984 # were available. Starting in mid-1995, XFree86 developers collected some of
4985 # those changes and began improvements, e.g., to support color. This was, by
4986 # the way, around the same time that rxvt developers began implementing color,
4987 # though dates (and attributions) are not well documented. I became interested
4988 # in xterm in late 1995, and involved in early 1996. To complete the picture,
4989 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
4991 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
4992 # "any-event" mouse mode.
4993 xterm+sm+1002|xterm any-event mouse,
4994 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
4995 xterm-1002|xterm any-event mouse,
4996 use=xterm+sm+1002, use=xterm,
4998 xterm+sm+1003|testing xterm-mouse,
4999 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
5001 xterm-1003|testing xterm-mouse,
5002 use=xterm+sm+1003, use=xterm,
5004 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5007 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5008 # dropping support for the X11 mouse protocol's shift-modifier and using
5009 # available bits in the first byte of the response to encode buttons 4 and 5.
5010 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5011 # older configurations which might have used the obsolete modifiers.
5013 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5014 # where the coordinates in the mouse response would be encoded in UTF-8,
5015 # thereby extending the range of coordinates past 222=(255-33). This is the
5016 # "1005" mouse mode.
5017 xterm+sm+1005|xterm UTF-8 mouse,
5018 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5019 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5020 xterm-1005|xterm UTF-8 mouse,
5021 use=xterm+sm+1005, use=xterm,
5023 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5024 # SGR-style parameters.
5026 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5027 # (By the way, this is a problem with the X11 protocol). A more plausible
5028 # criticism is that the responses provided by the 1005 mode are not distinct
5029 # from the non-1005 responses.
5031 # As an alternative (and fixing the longstanding limitation of X11 mouse
5032 # protocol regarding button-releases), I provided this:
5033 xterm+sm+1006|xterm SGR-mouse,
5034 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5035 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
5036 xterm-1006|xterm SGR-mouse,
5037 use=xterm+sm+1006, use=xterm,
5040 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5041 # (kterm should not invoke DEC Graphics as the alternate character set
5042 # -- Kenji Rikitake)
5043 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5044 # -- MATSUMOTO Shoji)
5045 # kterm implements acsc via built-in table of X Drawable's
5046 kterm|kterm kanji terminal emulator (X window system),
5049 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
5050 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
5051 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
5052 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5054 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
5055 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
5056 kterm-color|kterm-co|kterm with ANSI colors,
5057 ncv@, use=kterm, use=ecma+color,
5061 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5062 # variant of xterm which is apparently no longer supported, but are interesting
5063 # because they illustrate SVr4 curses mouse controls - T.Dickey
5064 xtermm|xterm terminal emulator (monocrome),
5065 OTbs, am, km, mir, msgr, xenl,
5066 btns#3, cols#80, it#8, lines#24,
5067 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5068 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5069 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5070 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5071 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5072 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5073 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
5074 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
5075 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
5076 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
5077 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
5078 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
5079 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
5080 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
5081 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5082 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5083 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5084 %;m%?%p9%t\016%e\017%;,
5085 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
5086 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
5088 xtermc|xterm terminal emulator (color),
5089 colors#8, ncv#7, pairs#64,
5090 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5091 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5093 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5097 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
5098 # Here's a termcap entry I've been using for xterm_color, which comes
5099 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
5100 # color stuff, I also have a status line defined as the window manager
5101 # title bar. [I have translated it to terminfo -- ESR]
5102 xterm-pcolor|xterm with color used for highlights and status line,
5104 bold=\E[1;43m, rev=\E[7;34m,
5105 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
5106 %t;7;31%;%?%p3%t;7;34%;m,
5107 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
5109 # This describes the capabilities of color_xterm, an xterm variant from
5110 # before ECMA-64 color support was folded into the main-line xterm release.
5111 # This entry is straight from color_xterm's maintainer.
5112 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
5113 # The README's with the distribution also say that it supports SGR 21, 24, 25
5114 # and 27, but they are not present in the terminfo or termcap.
5115 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
5116 OTbs, am, km, mir, msgr, xenl, XT,
5117 cols#80, it#8, lines#65, ncv@,
5118 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5119 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5120 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5121 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5122 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5123 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5124 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
5125 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5126 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
5127 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
5128 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
5129 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5130 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
5131 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
5132 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
5133 rmso=\E[27m, rmul=\E[24m,
5134 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
5136 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5137 %;m%?%p9%t\016%e\017%;,
5138 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
5139 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
5140 smul=\E[4m, use=ecma+color, use=vt220+keypad,
5142 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
5143 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
5144 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
5145 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
5146 # that each of those implements the home, end, delete keys differently.
5148 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
5149 # colors; note that this is not compatible with the 5.2 version.
5150 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
5151 # match XFree86's xterm.terminfo usage and prevent circular links
5152 xterm-color|nxterm|generic color xterm,
5154 op=\E[m, use=xterm-r6, use=klone+color,
5156 # This entry describes an xterm with Sun-style function keys enabled
5157 # via the X resource setting "xterm*sunFunctionKeys:true"
5158 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
5159 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
5160 # because we want it to be seen as <kcpy>.
5161 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
5162 # with their Sun keyboard labels instead.
5163 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
5164 xterm-sun|xterm with sunFunctionKeys true,
5165 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
5166 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
5167 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
5168 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
5169 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
5170 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
5171 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
5172 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
5173 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
5174 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
5175 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
5176 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
5178 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
5179 cols#80, lines#24, use=xterm-sun,
5182 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
5183 gnome-rh62|Gnome terminal,
5185 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5188 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
5190 # This implements a subset of vt102 with a random selection of features from
5191 # other terminals such as color and function-keys.
5193 # shift-f1 to shift-f10 are f11 to f20
5195 # NumLock changes the application keypad to approximate vt100 keypad, except
5196 # that there is no escape sequence matching comma (,).
5198 # Other defects observed:
5199 # vt100 LNM mode is not implemented.
5200 # vt100 80/132 column mode is not implemented.
5201 # vt100 DECALN is not implemented.
5202 # vt100 DECSCNM mode is not implemented, so flash does not work.
5203 # vt100 TBC (tab reset) is not implemented.
5204 # xterm alternate screen controls do not restore cursor position properly
5205 # it hangs in tack after running function-keys test.
5206 gnome-rh72|GNOME Terminal,
5208 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
5209 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
5210 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
5212 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
5214 # GNOME Terminal 2.0.1 (Redhat 8.0)
5216 # Documentation now claims it implements vt220 (which is demonstrably false).
5217 # However, it does implement ECH, which is a vt220 feature. And there are
5218 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
5219 # more of its bugs using vttest.
5221 # However, note that bce and msgr are broken in this release. Tabs (tbc and
5222 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
5224 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
5225 # operations. Shift-tab generates a distinct sequence so it can be argued
5226 # that it implements kcbt.
5227 gnome-rh80|GNOME Terminal,
5229 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
5230 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
5232 # GNOME Terminal 2.2.1 (Redhat 9.0)
5234 # bce and msgr are repaired.
5235 gnome-rh90|GNOME Terminal,
5237 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
5238 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
5239 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
5242 # GNOME Terminal 2.14.2 (Fedora Core 5)
5243 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
5244 gnome-fc5|GNOME Terminal,
5246 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
5248 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
5250 # GNOME Terminal 2.18.1 (2007 snapshot)
5252 # For any "recent" version of gnome-terminal, it is futile to attempt to
5253 # support modifiers on cursor- and keypad keys because the program usually
5254 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
5255 # of the keys (which more/less correspond to the termcap values), and will
5256 # interpret those according to the $TERM value, but others not in the
5257 # terminfo according to some constantly changing set of hacker guidelines -TD
5258 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
5259 use=xterm+pcc2, use=gnome-fc5,
5260 gnome-2007|GNOME Terminal snapshot 2.18.1,
5263 # GNOME Terminal 2.22.3 (2008 snapshot)
5265 # In vttest, it claims to be a vt220 with national replacement character-sets,
5266 # but aside from the identifier string, implements only a small fraction of
5267 # vt220's behavior, which will make it less usable on a VMS system (unclear
5268 # what the intent of the developer is, since the NRC feature exposed in vttest
5269 # by this change does not work).
5270 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
5271 use=vte+pcfkeys, use=vte-2007,
5272 gnome-2008|GNOME Terminal snapshot 2.22.3,
5275 # GNOME Terminal 3.6.0 (2012)
5276 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
5277 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
5280 # Testing with tack shows that flash does not/has not worked -TD
5281 vte-2012|VTE 0.34.1,
5283 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
5284 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
5285 %|%t;7%;m%?%p9%t\016%e\017%;,
5286 use=ecma+italics, use=vte-2008,
5287 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5288 # 61 differences from a correct entry for gnome terminal.
5289 gnome-2012|GNOME Terminal 3.6.0,
5292 # Before 2008, GNOME terminal could automatically use the contents of the
5293 # "xterm" terminfo to supply key information which is not built into the
5294 # program. With 2.22.3, this list was built into the program (which addressed
5295 # the inadvertent use of random terminfo data, though using a set of values
5296 # which did not correspond to any that xterm produced - still not solving the
5297 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
5299 # terminfo modifier code keys
5300 # kf13-kf24 shift 2 F1 to F12
5301 # kf25-kf36 control 5 F1 to F12
5302 # kf37-kf48 shift/control 6 F1 to F12
5303 # kf49-kf60 alt 3 F1 to F12
5304 # kf61-kf63 shift-alt 4 F1 to F3
5306 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5307 # no parameters. This appears to be rote copying based on xterm+pcc0.
5308 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5309 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5310 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5311 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5312 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5313 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5314 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5316 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5319 # deprecated - use "vte" for newer versions
5320 gnome|GNOME Terminal,
5323 # relevant changes were made in January 2014, and later.
5325 # Originally VTE was promoted as a library able to emulate any terminal by
5326 # reading its terminal description. In practice, that never got beyond the
5327 # ability to read definitions of special keys (function-, editing-, cursor).
5329 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
5330 # of a termcap file derived from xterm). That was incomplete because it did
5331 # not have any of the modifier-key information used for xterm's function-,
5332 # editing-, and cursor-keys. Having its own reader was unnecessary since
5333 # ncurses provides that information; used since xterm patch #225 in 2007.
5335 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
5336 # gnome #730137) dealt with attempts to recast that termcap reader as library
5337 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
5338 # abandoning that and finally constructing a table to match xterm's default
5339 # behavior, e.g., for "xterm+pcfkeys".
5340 vte-2014|VTE 0.35.1,
5342 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5343 ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT,
5344 use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
5346 # As of January 2018, this is the most recent release,
5347 # e.g., with gnome-terminal 3.26.2
5348 vte-2017|VTE 0.50.2,
5349 use=ecma+strikeout, use=vte-2014,
5351 vte|VTE aka GNOME Terminal,
5354 vte-256color|VTE with xterm 256-colors,
5355 use=xterm+256color, use=vte,
5356 gnome-256color|GNOME Terminal with xterm 256-colors,
5359 # XFCE Terminal 0.2.5.4beta2
5361 # This is based on some of the same source code, e.g., the VTE library, as
5362 # gnome-terminal, but has fewer features, fails more screens in vttest.
5363 # Since most of the terminfo-related behavior is due to the VTE library,
5364 # the terminfo is the same as gnome-terminal.
5370 # https://github.com/thestinger/termite
5372 # A review requires install of Arch Linux since Fedora and Debian don't have
5373 # this program. It uses "vte3-ng" (a conflicting package), which is here:
5374 # https://github.com/thestinger/vte-ng
5375 # which (based on the default branch setting) seems to be a fork of vte
5376 # 0.48.2, and is noted as such in Arch:
5377 # https://www.archlinux.org/packages/community/x86_64/vte3-ng/
5378 # It won't be merged:
5379 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
5380 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
5381 # but perhaps made obsolete.
5383 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
5384 # was mostly cut/paste from xterm-256color, but since VTE does not actually
5385 # implement several of the features in that terminal description, this one is
5386 # trimmed to eliminate those. Also, since it is a slightly older version of
5387 # VTE, it lacks a few more features (again, trimmed).
5388 termite|VTE-based terminal,
5389 am, ccc, km, mir, msgr, npc, xenl,
5390 cols#80, it#8, lines#24, ncv@,
5391 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
5393 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5394 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
5395 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5396 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5397 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5398 dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5399 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5400 ht=^I, hts=\EH, ind=\n, indn=\E[%p1%dS, invis=\E[8m,
5401 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
5402 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM,
5403 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l,
5404 rmcup=\E[?1049l, rmkx=\E[?1l\E>, rmso=\E[27m,
5405 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
5406 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5408 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
5409 smcup=\E[?1049h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5410 tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+idc, use=ansi+idl,
5411 use=ansi+enq, use=xterm+256color, use=ecma+color,
5412 use=xterm+pcfkeys, use=xterm+sl-twm,
5415 # Multi-Gnome-Terminal 1.6.2
5417 # This does not use VTE, and does have different behavior (compare xfce and
5419 mgt|Multi GNOME Terminal,
5420 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
5423 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
5424 # or not is debatable).
5427 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
5429 # Konsole 1.0.1 (2001/11/25)
5430 # (formerly known as kvt)
5432 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
5433 # simplify this entry (and point out why konsole isn't xterm), we base this on
5434 # xterm-r6. The default keyboard appears to be 'linux'.
5437 # a) konsole implements several features from XFree86 xterm, though none of
5438 # that is documented - except of course in its source code - apparently
5439 # because its implementors are unaccustomed to reading documentation - as
5440 # evidenced by the sparse and poorly edited documentation distributed with
5441 # konsole. Some features such as the 1049 private mode are recognized but
5442 # incorrectly implemented as a duplicate of the 47 private mode.
5443 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
5444 # sends PC-style escapes rather than vt100.
5445 # c) fails vttest menu 3 (Test of character sets) because it does not properly
5446 # parse some control sequences. Also fails vttest Primary Device Attributes
5447 # by sending a bogus code (in the source it says it's supposed to be a
5448 # vt220, which is doubly incorrect because it does not implement vt220
5449 # control sequences except for a few special cases). Treat it as a
5450 # mildly-broken vt102.
5452 # Update for konsole 1.3.2:
5453 # The 1049 private mode works (but see the other xterm screens in vttest).
5454 # Primary Device Attributes now returns the code for a vt100 with advanced
5455 # video option. Perhaps that's intended to be a "mildly-broken vt102".
5457 # Updated for konsole 1.6.4:
5458 # add konsole-solaris
5460 # Updated for konsole 1.6.6:
5461 # add control-key modifiers for function-keys, etc.
5463 # Updated for konsole 2.3 (October 2008):
5464 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
5465 # different from xterm (and vt100's). They have the same behavior in
5466 # this detail, but it is unclear which copies the other.
5468 # Updated for konsole 2.12.4 (late 2013):
5471 # Updated for konsole 16.07 (mid 2016):
5472 # add dim, invis, strikeout
5473 # (also overline, which is too rarely used to provide as an extension)
5475 # Updated for konsole 17.12.0 (late 2017):
5476 konsole-base|KDE console window,
5479 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, dim=\E[2m,
5480 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
5481 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, invis=\E[8m, kbs=^?,
5482 kdch1=\E[3~, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@,
5483 kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@,
5484 kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT,
5485 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
5486 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5487 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5488 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5489 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
5490 use=ecma+strikeout, use=ecma+italics, use=ecma+color,
5493 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
5494 # "vt100" key-table files along with a compiled-in default key-table.
5496 # The main difference between the two keytabs was that the developer equated
5497 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
5498 # that. For the same reason, the home/end keys differ. A VT100 had none of
5499 # that. The otherwise identical keytabs have definitions to model the VT52
5500 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
5502 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
5503 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
5504 # dropped from the install in June 2008.
5506 # The default keytab added in January 2000 was originally titled "X11 R6",
5507 # and likewise retitled to "XFree 4".
5509 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
5510 # and changing backspace to ^H, removing that keytab's attempt to model the
5511 # VT100 keypad and VT52 (KDE #20459).
5513 # The developers made changes to the default and linux keytabs. Comparing
5514 # the original and 2018 versions using diffstat:
5515 # default: 119 added, 147 deleted, 28 unchanged
5516 # linux: 47 added, 28 deleted, 104 unchanged
5518 # Most of the change for the default keytab was to make konsole act more like
5519 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
5520 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
5521 # made an external file (like "linux" and "solaris"), and some further
5522 # refinement made. But there are still flaws in the scheme.
5524 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
5525 # Shift into a placeholder in the table entries. That works well if all of the
5526 # modified keys are modified in the same way. But xterm does not do that. The
5527 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
5528 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
5529 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
5530 # kf14: '\E[1;2Q', '\EO2Q'.
5532 # In effect, a quarter of konsole's function-keys are different from xterm.
5534 # It is not a simple blunder:
5535 # a) xterm patch #121 (November 1999), providing the first version of the
5536 # PC-style modifiers would send \EO2Q
5537 # b) xterm patch #216 (July 2006) amended this and other details, provided
5538 # better documentation for the modifiers and made the behavior configurable,
5539 # e.g., using the modifyFunctionKeys resource. The reason why it sends
5540 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
5541 # changelog points this out as "avoid sending SS3 with parameters".
5542 # c) That came after AnyMod was introduced, but still early enough that one
5543 # might expect konsole's developers to followup. Twelve years later that
5544 # has yet to happen.
5546 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
5548 konsole-linux|KDE console window with linux keyboard,
5549 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
5550 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
5551 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5552 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
5553 konsole-solaris|KDE console window with Solaris keyboard,
5554 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5556 # Obsolete: x11r5.keymap
5557 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
5558 # terminfo at the time rather than testing the code.
5559 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
5560 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5562 # The value for kbs (see konsole-vt100) reflects local customization rather
5563 # than the settings used for XFree86 xterm.
5564 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
5565 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
5568 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
5569 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
5572 # Obsolete: vt100.keymap
5573 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
5574 # it is still useful for deriving the other entries, since the developer
5575 # provided function-keys based on xterm.
5576 konsole-vt100|KDE console window with vt100 (sic) keyboard,
5577 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
5578 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
5579 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
5580 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5581 khome=\E[H, use=konsole-base,
5583 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
5584 # September 2008 and removed in June 2016. The developer who removed it stated
5585 # that it was never installed.
5586 konsole-vt420pc|KDE console window with vt420 pc keyboard,
5587 kbs=^H, kdch1=^?, use=konsole-vt100,
5589 # make a default entry for konsole
5590 konsole|KDE console window,
5593 # These were written for ncurses:
5594 konsole-16color|klone of xterm-16color,
5595 ncv#32, use=ibm+16color, use=konsole,
5596 konsole-256color|KDE console window with xterm 256-colors,
5597 use=xterm+256setaf, use=konsole,
5600 # http://mlterm.sourceforge.net/
5602 mlterm|multi lingual terminal emulator,
5605 # Tested mlterm 3.2.2:
5606 # mlterm 3.x has made changes, but they are not reflected in the included
5607 # mlterm.ti; this entry is based on testing with ncurses, tack and vttest -TD
5608 # 2018/01/21: found xterm+sm+1006 did not work with version 3.3.8
5609 mlterm3|multi lingual terminal emulator,
5610 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
5611 use=ecma+italics, use=xterm+app, use=xterm+pcf0,
5612 use=xterm+pcc2, use=xterm+pce2, use=xterm+x11mouse,
5615 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
5617 # It is nominally a vt102 emulator, with features borrowed from rxvt and
5620 # The function keys are numbered based on shift/control/alt modifiers, except
5621 # that the control-modifier itself is used to spawn a new copy of mlterm (the
5622 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
5623 # how it is configured.
5625 # kf1 to kf12 \E[11~ to \E[24~
5626 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
5627 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
5628 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
5629 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
5630 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
5631 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
5632 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
5634 mlterm2|multi lingual terminal emulator,
5635 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
5636 colors#8, cols#80, it#8, lines#24, pairs#64,
5637 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5638 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5639 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5640 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5641 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5642 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5643 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5644 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
5645 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5646 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
5647 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
5648 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5649 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
5650 kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~,
5651 kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE,
5652 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT,
5653 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
5654 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5655 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5656 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5657 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5659 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5660 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5661 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5662 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
5664 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5665 # looks in its termcap to decide which string to send. If it used terminfo
5666 # (when available), it could use the extended names introduced for xterm.
5667 mlterm+pcfkeys|fragment for PC-style fkeys,
5668 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5669 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5670 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5671 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5672 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5673 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5674 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5675 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5676 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5678 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5679 use=xterm+256color, use=mlterm,
5682 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5683 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5686 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5687 # but some applications don't work with that.
5688 # It also has an AIX extension
5692 # but the latter does not work correctly.
5694 # The distributed terminfo says it implements hpa and vpa, but they are not
5695 # implemented correctly, using relative rather than absolute positioning.
5697 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5698 # Since rxvt is not really compatible with xterm, it should be configured as
5699 # "rxvt" or "rxvt-color".
5701 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5702 # remove km as per tack test -TD
5703 rxvt-basic|rxvt terminal base (X Window System),
5704 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5705 cols#80, it#8, lines#24,
5706 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5707 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5708 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5709 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5710 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5711 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5712 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5713 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
5714 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5715 il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
5716 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5717 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5718 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5720 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5721 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5723 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5724 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5726 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5727 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5728 use=rxvt+pcfkeys, use=vt220+keypad,
5729 # Key Codes from rxvt reference:
5731 # Note: Shift + F1-F10 generates F11-F20
5733 # For the keypad, use Shift to temporarily override Application-Keypad
5734 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5735 # is off, escape sequences toggle Application-Keypad setting.
5736 # Also note that values of Home, End, Delete may have been compiled
5737 # differently on your system.
5739 # Normal Shift Control Ctrl+Shift
5740 # Tab ^I ESC [ Z ^I ESC [ Z
5741 # BackSpace ^H ^? ^? ^?
5742 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5743 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5744 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5745 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5746 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5747 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5748 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5749 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5750 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5751 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5752 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5753 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5754 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5755 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5756 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5757 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5758 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5759 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5760 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5761 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5762 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5763 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5764 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5765 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5766 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5767 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5768 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5769 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
5770 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
5773 # Up ESC [ A ESC [ a ESC O a ESC O A
5774 # Down ESC [ B ESC [ b ESC O b ESC O B
5775 # Right ESC [ C ESC [ c ESC O c ESC O C
5776 # Left ESC [ D ESC [ d ESC O d ESC O D
5777 # KP_Enter ^M ESC O M
5778 # KP_F1 ESC O P ESC O P
5779 # KP_F2 ESC O Q ESC O Q
5780 # KP_F3 ESC O R ESC O R
5781 # KP_F4 ESC O S ESC O S
5782 # XK_KP_Multiply * ESC O j
5783 # XK_KP_Add + ESC O k
5784 # XK_KP_Separator , ESC O l
5785 # XK_KP_Subtract - ESC O m
5786 # XK_KP_Decimal . ESC O n
5787 # XK_KP_Divide / ESC O o
5799 # The source-code for rxvt actually defines mappings for F21-F35, using
5800 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
5801 # are rare, so this entry uses the shift- and control-modifiers as in
5802 # xterm+pcfkeys to define keys past F12.
5804 # kIC is normally not used, since rxvt performs a paste for that (shifted
5805 # insert), unless private mode 35 is set.
5807 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
5808 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
5809 rxvt+pcfkeys|fragment for PC-style fkeys,
5810 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
5811 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
5812 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
5813 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5814 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5815 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5816 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
5817 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
5818 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
5819 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
5820 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
5821 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
5822 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
5823 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5824 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5825 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5826 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5827 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5828 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5829 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5831 # rxvt was originally "xvt", first announced in April 1993:
5832 # http://www.informatica.co.cr/linux-desktops/research/1993/0416.html
5834 # Though its change-log does not mention this, John Davis has stated that he
5835 # was the author of the changes to use the bce ("new color model") which was
5836 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
5837 # dates, nor give developer's names. Initial color support was added for rxvt
5838 # "2.0", which was sometime in 1994.
5840 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
5841 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
5843 # http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
5844 # was from one of my bug-reports -TD
5846 # While the color model both for xterm and rxvt was based on Linux console,
5847 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
5848 # behavior: inserting/deleting characters does not fill the newly empty cell
5849 # with the default background color.
5850 rxvt|rxvt terminal emulator (X Window System),
5852 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5853 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5854 rxvt-color|rxvt terminal emulator (X Window System),
5856 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5857 use=xterm+256color, use=rxvt,
5858 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5859 use=xterm+88color, use=rxvt,
5860 rxvt-xpm|rxvt terminal emulator (X Window System),
5862 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5863 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5864 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5865 \302x\263y\363z\362{\343|\330}\234~\376,
5867 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5868 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5869 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5870 \302x\263y\363z\362{\343|\330~\376,
5873 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5874 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5875 rxvt-16color|rxvt with 16 colors like aixterm,
5876 ncv#32, use=ibm+16color, use=rxvt,
5881 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5882 # makes its function-keys different from other flavors of rxvt -TD
5884 # Testing with tack:
5885 # + made custom description (below) to work, though it sets TERM=xterm.
5887 # Testing with vttest:
5888 # + While "based on" rxvt, some of the basic functionality is broken. The
5889 # window collapses to a single line when running several of the screens
5890 # in vttest, e.g., the tests for cursor movement, screen features,
5891 # double-sized characters.
5892 # + The vt52 test works properly, but this is an exception. Due to the
5893 # other bug(s) most of vttest is untestable.
5894 # + the color test using ECH shows a gap in the bce model, like rxvt.
5896 # Testing with xterm "vttest" scripts:
5897 # + resize.pl does not work because mrxvt does implement CSI 18 t
5898 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
5899 # + none of the "dynamic colors" (OSC colors) scripts work.
5900 mrxvt|multitabbed rxvt,
5902 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5903 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5904 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5905 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5906 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5907 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5910 mrxvt-256color|multitabbed rxvt with 256 colors,
5911 use=xterm+256color, use=mrxvt,
5914 # From: Michael Jennings <mej@valinux.com>
5918 # removed kf0 which conflicts with kf10 -TD
5919 # remove cvvis which conflicts with cnorm -TD
5920 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5921 # but does otherwise follow the rxvt+pcfkeys model -TD
5922 # remove nonworking flash -TD
5923 # remove km as per tack test -TD
5924 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5925 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5926 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5927 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5928 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5929 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5930 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5931 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5932 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5933 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5934 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5935 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5936 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5937 is1=\E[?47l\E>\E[?1l,
5938 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5939 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5940 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5941 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5942 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5943 rmso=\E[27m, rmul=\E[24m,
5944 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5945 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5948 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5949 %;m%?%p9%t\016%e\017%;,
5950 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5951 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5952 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5955 Eterm-256color|Eterm with xterm 256-colors,
5956 use=xterm+256color, use=Eterm,
5958 Eterm-88color|Eterm with 88 colors,
5959 use=xterm+88color, use=Eterm,
5962 # Based on rxvt 2.4.8, it has a few differences in key bindings
5963 aterm|AfterStep terminal,
5965 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5969 # This is not based on xterm's source...
5970 # vttest shows several problems with keyboard, cursor-movements.
5971 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
5972 xiterm|internationalized terminal emulator for X,
5974 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
5978 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
5979 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
5980 # chars look like --esr)
5981 hpterm|X-hpterm|hp X11 terminal emulator,
5982 am, da, db, mir, xhp, xon,
5983 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
5984 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
5985 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
5986 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
5987 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
5988 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5989 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
5990 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
5991 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
5992 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
5993 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
5994 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
5995 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
5996 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
5997 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
5999 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
6000 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6001 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
6002 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6004 # HPUX 11 provides a color version.
6005 hpterm-color|HP X11 terminal emulator with color,
6009 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
6010 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
6013 # This is for the extensible terminal emulator on the X11R6 contrib tape.
6014 # It corresponds to emu's internal emulation:
6016 # emu's default sets TERM to "xterm", but that doesn't work well -TD
6017 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
6018 # fixes: add civis, cnorm, sgr -TD
6019 emu|emu native mode,
6020 am, bce, mir, msgr, xon,
6021 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
6022 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
6023 \224t\225u\226v\227w\230x\231~\244,
6024 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
6025 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
6026 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
6027 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
6028 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
6029 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
6030 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
6031 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
6032 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
6033 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
6034 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
6035 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
6036 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
6037 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
6038 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
6039 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
6041 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
6043 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
6045 # vt220 Terminfo entry for the Emu emulation, corresponds to
6047 # with NumLock set (to make the keypad transmit kf0-kf9).
6048 # fixes: add am, xenl, corrected sgr0 -TD
6049 emu-220|Emu-220 (vt200-7bit mode),
6051 cols#80, it#8, lines#24, vt#200,
6052 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
6053 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
6054 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
6055 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
6056 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
6057 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
6058 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
6059 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
6060 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
6061 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
6062 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6063 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
6064 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
6065 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
6066 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
6067 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
6068 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
6069 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
6070 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
6071 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
6072 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
6073 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
6074 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6075 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
6076 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
6079 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
6080 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
6081 # indicate that it emulates more than one terminal, but incompletely.
6083 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
6084 # It is based on vt102's entry, with some subtle differences, but also
6086 # supports ANSI colors (except for 'op' string)
6087 # apparently implements alternate screen like xterm
6088 # does not use padding, of course.
6089 mvterm|vv100|SwitchTerm aka mvTERM,
6090 am, eslok, hs, km, mir, msgr, xenl, xon,
6091 colors#8, cols#80, it#8, lines#24, pairs#64,
6092 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6093 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6094 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6095 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6096 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6097 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6098 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
6099 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6100 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
6101 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
6102 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
6103 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6104 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
6106 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
6107 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6108 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6109 %;m%?%p9%t\016%e\017%;,
6110 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
6111 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6112 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
6116 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
6118 # "mterm -type ansi" sets $TERM to "ansi"
6119 mterm-ansi|ANSI emulation,
6122 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6123 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6124 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
6125 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6126 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6127 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
6128 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
6129 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
6130 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
6131 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
6133 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6134 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6135 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
6136 smul=\E[4m, vpa=\E[%i%p1%dd,
6137 # mterm normally sets $TERM to "mterm"
6138 mterm|mouse-sun|Der Mouse term,
6141 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
6142 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
6143 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
6144 rmir=^O, rmso=^T, smir=^Q, smso=^V,
6145 # "mterm -type decansi" sets $TERM to "decansi"
6147 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
6148 decansi|ANSI emulation with DEC compatibility hacks,
6149 am, mir, msgr, xenl,
6150 colors#8, it#8, pairs#64,
6151 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6152 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6153 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
6154 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
6155 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6156 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6157 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6158 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
6159 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
6160 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
6161 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
6162 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
6163 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6164 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6165 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6166 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
6167 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
6168 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
6169 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
6170 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
6171 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6172 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6173 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6174 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6175 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
6176 u7=\E[6n, vpa=\E[%i%p1%dd,
6179 # http://vwm.sourceforge.net/
6181 # VWM 2.0.2 (2009-05-01)
6182 # vwmterm is a terminal emulator written for the VWM console window manager.
6183 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
6185 am, bce, ccc, mir, msgr, npc, xenl, xon,
6187 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6188 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6189 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD,
6190 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6191 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6192 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
6193 home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, kcub1=\E[D,
6194 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6195 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
6196 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6197 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6198 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
6199 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
6200 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6201 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
6202 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6203 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
6204 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
6208 # MGR is a Bell Labs window system lighter-weight than X.
6209 # These entries describe MGR's xterm-equivalent.
6210 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
6213 mgr|Bellcore MGR (non X) window system terminal emulation,
6215 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
6216 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
6217 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
6218 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
6219 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
6220 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
6221 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6222 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
6223 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
6225 mgr-sun|Mgr window with Sun keyboard,
6226 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
6227 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
6228 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
6229 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
6230 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
6231 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
6232 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
6233 mgr-linux|Mgr window with Linux keyboard,
6234 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
6235 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
6236 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
6237 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6238 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
6243 st|stterm| simpleterm,
6247 # dim is intermittent, sometimes works, sometimes does not
6248 # italics may show up with yellow color
6249 # has control cursor-keys, alt cursor-keys, still no combinations
6250 # has control pageup/down
6251 st-0.7|simpleterm 0.7,
6254 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
6255 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
6256 kcbt@, kent@, oc=\E]104\007,
6257 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6259 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6261 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6262 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
6263 Ss=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
6264 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
6265 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
6266 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
6267 use=ecma+strikeout, use=st-0.6,
6271 # This version uses a table which supports a single modifier (a subset of
6272 # xterm's keys, using the same scheme). Because it supports only a single
6273 # modifier in this table, function keys f36-f48 are normally unavailable
6274 # because they are assigned to modifier-4.
6276 # The program assigns TERM to match the program name (the upstream source says
6277 # "st", but Debian renames it to "stterm").
6279 # The source includes two entries which are not useful here:
6280 # st-meta| simpleterm with meta key,
6281 # st-meta-256color| simpleterm with meta key and 256 colors,
6282 # because st's notion of "meta" does not correspond to the terminfo definition.
6283 # Rather, it acts like xterm - when the meta feature is disabled.
6286 # Added eo, removed ul -TD
6289 # implements control-modifier, but not control-shift for special keys
6290 # implements alt-modifier, but not alt-shift for special keys
6293 # http://git.suckless.org/st/log/st.info
6294 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
6295 # still has no function keys past kf36 (no combinations of modifiers)
6296 # no application keypad mode, e.g, kent.
6297 st-0.6|simpleterm 0.6,
6298 am, bce, hs, mir, msgr, npc, xenl, XT,
6299 colors#8, cols#80, it#8, lines#24, pairs#64,
6300 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
6302 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6303 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
6304 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6305 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6306 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6307 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6308 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6309 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
6310 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6311 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
6312 invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
6313 kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
6314 kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
6315 ka3=\E[5~, kb2=\EOu, kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z,
6316 kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6317 kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F,
6318 kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
6319 kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q,
6320 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
6321 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
6322 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
6323 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
6324 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
6325 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
6326 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
6327 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
6328 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
6329 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
6330 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
6331 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
6332 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
6333 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
6334 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
6335 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6336 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
6337 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
6338 mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6339 rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
6340 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l,
6341 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6342 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6344 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6346 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6347 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
6348 sgr0=\E[0m, smacs=\E(0, smcup=\E[?1049h, smir=\E[4h,
6349 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6350 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
6351 vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=xterm+sl,
6356 # Note: the original terminfo description uses leading blank to persuade
6357 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
6360 # Reading the code shows it should work for aixterm 16-colors
6361 # - added st-16color
6364 # - set eo (erase-overstrike)
6366 # - tbc doesn't work
6368 # - cbt doesn't work
6369 # - shifted cursor-keys send sequences like rxvt
6370 # - sgr referred to unimplemented "invis" mode.
6371 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
6372 simpleterm|old-st| simpleterm 0.1.1,
6373 am, eo, mir, msgr, ul, xenl,
6374 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
6375 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6376 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6377 cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6378 cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6379 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6380 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6381 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6382 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^?,
6383 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6384 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6385 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6386 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6387 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
6388 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
6389 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6390 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6392 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
6393 st-16color|stterm-16color|simpleterm with 16-colors,
6394 use=ibm+16color, use=st,
6395 # 256 colors "works", but when running xterm's test-scripts, some garbage is
6396 # shown in the titlebar.
6398 # terminal wants to use TERM=stterm-256color, but that is longer than 14
6399 # characters, making the choice nonportable.
6400 st-256color|stterm-256color|simpleterm with 256 colors,
6402 initc@, oc@, use=xterm+256color, use=st,
6405 # https://code.google.com/p/jessies/
6406 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
6407 # Debian/current -TD (2011/8/20)
6409 # There are some packaging problems:
6410 # a) using Java, the program starts off using 50Mb, and climbs from there,
6411 # up to 114Mb after testing (no scrollback).
6412 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
6413 # (two copies, just in case the host happens to be Mac OS X).
6414 # I deleted this after testing with tack.
6416 # Issues/features found with tack:
6417 # a) tbc does not work (implying that hts also is broken).
6418 # Comparing with the tabs utility shows a problem with the last tabstop on
6420 # b) has xterm-style shifted function-key strings
6421 # meta also is used, but control is ignored.
6422 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
6424 # d) some combinations of shift/control send xterm-style sequences for
6425 # insert/delete/home/end.
6426 # e) numeric keypad sends only numbers (compare with vttest).
6427 # f) meta mode (km) is not implemented.
6429 # Issues found with ncurses test-program:
6430 # a) bce is inconsistently implemented
6431 # b) widths of Unicode values above 256 do not always agree with wcwidth.
6433 # Checked with vttest, found low degree of compatibility there.
6435 # Checked with xterm's scripts, found that the 256-color palette is fixed.
6439 # b) corrected sgr0 to reset alternate character set
6440 # c) modified smacs/rmacs to use SCS rather than SI/SO
6443 terminator|Terminator no line wrap,
6444 eo, mir, msgr, xenl, xon,
6445 colors#0x100, cols#80, it#8, lines#24, lm#0, pairs#0x10000,
6446 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6447 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6448 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6449 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
6450 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6451 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6452 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6453 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
6454 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
6455 is1=\E[?47l\E=\E[?1l,
6456 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6457 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6458 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6459 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6460 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6461 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6462 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6463 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6464 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6465 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6466 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
6467 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
6468 setaf=\E[38;5;%p1%dm,
6469 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
6471 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
6472 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6476 # http://enlightenment.org
6478 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
6479 # emulator, nor is it compatible with xterm, but it uses a few features from
6483 # cursor does not fill on focus
6484 # there are pervasive problems with clearing/erasing parts of the screen
6485 # resizing the window causes it to stop listening to the keyboard
6487 # doesn't understand vt100 CPR needed for resize
6492 # uses bce model for colors, but (see below) fails the vttest screens
6493 # has partial support for 256color feature.
6494 # tack function-keys (a subset of xterm+pcf0), and
6495 # tack cursor-keys (a subset of xterm+pce2):
6496 # ctrl+shift (ignored)
6498 # shift-alt modifier -> shift (2)
6502 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
6503 # ctrl + khome/kend works - none of the other modifiers do
6505 # spits lots of messages from termptyesc.c especially in vttest.
6506 # no 132-column mode
6507 # fails menu 1, 2 (definitely not vt100-compatible)
6508 # primary (claims vt420 with several options, apparently none work) and
6509 # secondary report says (perhaps... vt420): \E[>41;285;0c
6510 # CHA, HPR, VPA, CNL, CPL work
6511 # BCE with ED/EL - fail
6512 # BCE with ECH/indexing - fail
6514 # unlike teken, background light/dark works
6516 # X10 and Normal mouse work
6517 # Any-event mouse works
6518 # Mouse button-event works
6520 # This description uses xterm+pcf0, which is misleading because the program
6521 # does not handle combinations of modifiers - but listing them all would
6522 # involve more effort than its developers spent -TD
6523 terminology-0.6.1|EFL-based terminal emulator,
6525 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
6526 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6527 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6528 kind=\E[1;2B, kri=\E[1;2A,
6529 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
6530 %;m%?%p9%t\016%e\017%;$<2>,
6531 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
6532 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
6533 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
6534 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
6535 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
6536 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
6537 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
6538 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
6541 # Tested terminology 1.0.0
6544 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
6545 # and control+alt were added like xterm+pcc2
6546 # Editing keys have some features from xterm+pce2
6547 # Changed from xterm+pcf0 to xterm+pcf2
6552 # Aside from the partial fixes for function/cursor/editing keys, no improvement
6553 # in other tests versus 0.6.1
6554 terminology-1.0.0|EFL-based terminal emulator,
6555 civis=\E[?25l, cnorm=\E[?12l\E[?25h, dim=\E[2m,
6556 flash=\E[?5h$<100/>\E[?5l, kend=\E[OF, khome=\E[OH,
6558 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
6559 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
6560 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
6561 use=xterm+x11mouse, use=xterm+pce2, use=xterm+pcf2,
6562 use=xterm+pcc2, use=terminology-0.6.1,
6564 terminology|EFL-based terminal emulator,
6565 use=terminology-1.0.0,
6567 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
6570 # Columbus UNIX virtual terminal. This terminal also appears in
6571 # UNIX 4.0 and successors as line discipline 1 (?), but is
6572 # undocumented and does not really work quite right.
6573 cbunix|cb unix virtual terminal,
6575 cols#80, lines#24, lm#0,
6576 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
6577 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
6578 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
6579 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
6580 smso=\Ea^D, smul=\Ea^A,
6581 # (vremote: removed obsolete ":nl@:" -- esr)
6582 vremote|virtual remote terminal,
6584 cols#79, use=cbunix,
6586 pty|4bsd pseudo teletype,
6587 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
6588 smso=\Ea$, smul=\Ea!, use=cbunix,
6592 # https://www.emacswiki.org/emacs/AnsiTerm
6593 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
6595 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
6596 eterm|gnu emacs term.el terminal emulation,
6599 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6600 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6601 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6602 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6603 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6604 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6605 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
6606 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
6607 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
6610 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
6611 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
6612 am, mir, msgr, xenl,
6613 colors#8, cols#80, lines#24, pairs#64,
6614 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6615 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6616 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6617 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6618 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6619 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6620 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
6621 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6622 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
6623 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
6624 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6625 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
6626 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
6628 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6629 u6=\E[%i%d;%dR, u7=\E[6n,
6631 # shell.el can "do" color, though not nearly as well.
6634 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
6637 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
6638 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
6639 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
6641 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
6642 # frequently. The contemporaneous term.el aka ansi-term does not "support"
6643 # italics but does not lose the color information -TD 2017/01/28.
6644 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
6646 colors#8, it#8, ncv#13, pairs#64,
6647 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
6648 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6649 sgr0=\E[m, smul=\E[4m, use=ecma+italics,
6653 # Entries for use by the `screen' program by Juergen Weigert,
6654 # Michael Schroeder, Oliver Laumann. The screen and
6655 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
6656 # come from University of Wisconsin and may be older.
6657 # (screen: added <cnorm> on ANSI model -- esr)
6659 # 'screen' defines extensions to termcap. Some are used in its terminal
6661 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
6662 # AX (bool) Does understand ANSI set default fg/bg color
6663 # (\E[39m / \E[49m).
6664 # S0 (str) Switch charset 'G0' to the specified charset.
6665 # E0 (str) Switch charset 'G0' back to standard charset.
6667 # Initially tested with screen 3.09.08
6669 # According to its manual page
6671 # Screen is a full-screen window manager that multiplexes a physical
6672 # terminal between several processes (typically interactive shells). Each
6673 # virtual terminal provides the functions of a DEC VT100 terminal and, in
6674 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
6675 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
6676 # multiple character sets).
6678 # However, there is a design error in its support for video highlights. The
6679 # program uses a table (rendlist) which equates the SGR codes to terminal
6680 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
6681 # is modified only by the presence or absence of the corresponding capabilities.
6682 # Not by their values.
6684 # If screen sets the TERMCAP variable, it uses hardcoded strings which
6685 # correspond to the rendlist table.
6687 # The table gives this information:
6699 # 22 reset bold, standout and dim
6701 # 24 reset underline
6706 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
6707 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
6708 # Without some redesign of screen, it is not possible to extend the set of
6709 # capabilities. Substitution would be possible, e.g., sending italics in
6710 # place of underline.
6712 # Because screen uses hard-coded parsing, it does not check if two capabilities
6713 # use the same value. For example, changing standout to be the same as any of
6714 # the other capabilities will confuse screen. Curses applications which use
6715 # sgr are not impacted (because that usually resets all capabilities before
6716 # setting any), but termcap applications do not use sgr -TD
6717 screen|VT 100/ANSI X3.64 virtual terminal,
6718 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
6719 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
6720 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6722 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6723 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
6724 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6725 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6726 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6727 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
6728 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6729 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
6730 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6731 ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
6732 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6733 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6734 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6735 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6736 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
6737 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6738 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
6739 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
6740 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
6741 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
6742 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
6743 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6744 vpa=\E[%i%p1%dd, E0=\E(B, S0=\E(%p1%c, use=ecma+color,
6745 # The bce and status-line entries are from screen 3.9.13 (and require some
6746 # changes to .screenrc).
6747 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
6750 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
6751 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
6753 # ======================================================================
6754 # Entries for GNU Screen with 16 colors.
6755 # Those variations permit to benefit from 16 colors palette, and from
6756 # bold font and blink attribute separated from bright colors. But they
6757 # are less portable than the generic "screen" 8 color entries: Their
6758 # usage makes real sense only if the terminals you attach and reattach
6759 # do all support 16 color palette.
6761 screen-16color|GNU Screen with 16 colors,
6762 use=ibm+16color, use=screen,
6764 screen-16color-s|GNU Screen with 16 colors and status line,
6765 use=ibm+16color, use=screen-s,
6767 screen-16color-bce|GNU Screen with 16 colors and BCE,
6768 use=ibm+16color, use=screen-bce,
6770 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
6771 bce, use=ibm+16color, use=screen-s,
6773 # ======================================================================
6774 # Entries for GNU Screen 4.02 with --enable-colors256.
6776 screen-256color|GNU Screen with 256 colors,
6777 use=xterm+256setaf, use=screen,
6779 screen-256color-s|GNU Screen with 256 colors and status line,
6780 use=xterm+256setaf, use=screen-s,
6782 screen-256color-bce|GNU Screen with 256 colors and BCE,
6783 bce, use=xterm+256setaf, use=screen-bce,
6785 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
6786 bce, use=xterm+256setaf, use=screen-s,
6788 screen.xterm-256color|GNU Screen with xterm using 256 colors,
6789 use=xterm+256setaf, use=screen.xterm-new,
6791 screen.konsole-256color|GNU Screen with konsole using 256 colors,
6792 use=xterm+256setaf, use=screen.konsole,
6794 screen.vte-256color|GNU Screen with vte using 256 colors,
6795 use=xterm+256setaf, use=screen.vte,
6797 screen.putty-256color|GNU Screen with putty using 256 colors,
6798 use=xterm+256setaf, use=screen.putty,
6800 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
6801 use=xterm+256setaf, use=screen.mlterm,
6803 # ======================================================================
6805 # Read the fine manpage:
6806 # When screen tries to figure out a terminal name for
6807 # itself, it first looks for an entry named "screen.<term>",
6808 # where <term> is the contents of your $TERM variable. If
6809 # no such entry exists, screen tries "screen" (or "screen-w"
6810 # if the terminal is wide (132 cols or more)). If even this
6811 # entry cannot be found, "vt100" is used as a substitute.
6813 # Notwithstanding the manpage, screen uses its own notion of the termcap
6814 # and some keys from "screen.<term>" are ignored. Here is an entry which
6815 # covers those (tested with screen 4.00.02) -TD
6816 screen+fkeys|function-keys according to screen,
6817 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
6820 # See explanation before "screen" entry. Cancel italics so that applications
6821 # do not assume screen supports the feature. Add this tweak to entries which
6822 # extend screen for terminals which do support italics.
6823 screen+italics|screen cannot support italics,
6826 # Here are a few customized entries which are useful -TD
6829 # (a) screen does not support invis.
6830 # (b) screen's implementation of bw is incorrect according to tack.
6831 # (c) screen appears to hardcode the strings for khome/kend, making it
6832 # necessary to override the "use=" clause's values (screen+fkeys).
6833 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
6834 # which is NOT the same as the terminfo screen.<term>.
6835 # (e) when screen finds one of these customized entries, it sets $TERM to
6836 # match. Hence, no "screen.xterm" entry is provided, since that would
6837 # create heartburn for people running remote xterm's.
6838 # (f) screen does not support rep.
6840 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
6841 # since the default translations override the built-in keycode
6842 # translation. They are suppressed here to show what is tested by tack.
6843 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
6845 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
6846 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6847 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
6848 E3@, use=screen+italics, use=screen+fkeys,
6849 use=xterm+x11mouse, use=xterm-new,
6850 #:screen.xterm|screen for modern xterm,
6851 #: use=screen.xterm-new,
6852 # xterm-r6 does not really support khome/kend unless it is propped up by
6853 # the translations resource.
6854 screen.xterm-r6|screen customized for X11R6 xterm,
6855 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
6856 # Color applications running in screen and TeraTerm do not play well together
6857 # on Solaris because Sun's curses implementation gets confused.
6858 screen.teraterm|disable ncv in teraterm,
6860 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
6861 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
6862 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6863 use=screen+fkeys, use=xterm+x11mouse, use=screen,
6865 screen.rxvt|screen in rxvt,
6867 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6868 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
6869 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
6871 screen.Eterm|screen in Eterm,
6872 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
6873 screen.mrxvt|screen in mrxvt,
6874 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
6875 screen.vte|screen in any VTE-based terminal,
6876 use=xterm+x11mouse, use=screen+italics,
6877 use=screen+fkeys, use=vte,
6878 screen.gnome|screen in GNOME Terminal,
6879 use=xterm+x11mouse, use=screen+italics,
6880 use=screen+fkeys, use=gnome,
6881 screen.konsole|screen in KDE console window,
6882 use=xterm+x11mouse, use=screen+italics,
6883 use=screen+fkeys, use=konsole,
6884 # fix the backspace key
6885 screen.linux|screen in linux console,
6887 kbs=^?, kcbt@, use=xterm+x11mouse, use=screen+fkeys,
6889 screen.mlterm|screen in mlterm,
6890 use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
6891 screen.putty|screen in putty,
6892 use=xterm+x11mouse, use=screen+fkeys, use=putty,
6894 # The default "screen" entry is reasonably portable, but not optimal for the
6895 # most widely-used terminal emulators. The "bce" capability is supported in
6896 # screen since 3.9.13, and when used, will require fewer characters to be sent
6897 # to the terminal for updates.
6899 # If you are using only terminals which support bce, then you can use this
6900 # feature in your screen configuration.
6902 # Adding these lines to your ".screenrc" file will allow using these customized
6907 screen-bce.xterm-new|screen optimized for modern xterm,
6909 ech@, use=screen+italics, use=screen.xterm-new,
6910 screen-bce.rxvt|screen optimized for rxvt,
6912 ech@, use=screen.rxvt,
6913 screen-bce.Eterm|screen optimized for Eterm,
6915 ech@, use=screen.Eterm,
6916 screen-bce.mrxvt|screen optimized for mrxvt,
6918 ech@, use=screen.mrxvt,
6919 screen-bce.gnome|screen optimized for GNOME-Terminal,
6921 ech@, use=screen+italics, use=screen.gnome,
6922 screen-bce.konsole|screen optimized for KDE console window,
6924 ech@, use=screen+italics, use=screen.konsole,
6925 screen-bce.linux|screen optimized for linux console,
6927 ech@, use=screen.linux,
6929 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
6930 cols#132, use=screen,
6932 screen2|old VT 100/ANSI X3.64 virtual terminal,
6933 cols#80, it#8, lines#24,
6934 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
6935 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6936 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6937 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6938 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
6939 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6940 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
6941 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
6942 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
6943 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
6944 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6945 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
6946 screen3|older VT 100/ANSI X3.64 virtual terminal,
6948 cols#80, it#8, lines#24,
6949 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6950 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6951 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6952 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6953 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6954 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6955 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
6956 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
6957 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
6958 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
6959 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
6960 smul=\E[4m, tbc=\E[3g,
6964 # tmux is mostly compatible with screen, but has support for italics, and some
6965 # of the xterm cursor bits.
6967 # However, unlike screen, tmux has no provision for using derived terminal
6968 # descriptions. When screen starts, it looks for a suitable "inner" terminal
6969 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
6970 # various entries such as screen.xterm-new provide a way to more closely
6971 # match the terminal.
6972 tmux|tmux terminal multiplexer,
6973 invis=\E[8m, rmso=\E[27m,
6974 sgr=\E[0%?%p6%t;1%;%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
6975 \s\s\s\s\s\s\s\s\s\s\s\s5%;%?%p5%t;2%;m%?%p9%t\016%e
6977 smso=\E[7m, E3=\E[3J, use=ecma+italics,
6978 use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,
6979 use=xterm+sl, use=xterm+tmux, use=screen,
6981 tmux-256color|tmux with 256 colors,
6982 use=xterm+256setaf, use=tmux,
6987 # http://www.brain-dump.org/projects/dvtm/
6989 # + This uses ncurses to manage the display, including support for italics and
6991 # + However, default-colors are incomplete: do not set bce.
6992 # + It does not implement flash (since no \e[?5h)
6993 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
6994 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
6995 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
6996 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
6998 # + It also omits the shifted cursor- and editing-keypad keys.
6999 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
7000 # (and passes those through without interpretation)
7001 # and may simply pass-through rxvt's, making it appear to work.
7002 # In other cases such as kf23 and up, no pass-through is done.
7003 # + Most of the mode-settings in the initialization/reset strings are not
7004 # implemented; dvtm copies its description from rxvt.
7005 dvtm|dynamic virtual terminal manager,
7006 am, eo, mir, msgr, xenl, AX,
7007 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
7008 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7009 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7010 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7011 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7012 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7013 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7014 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7015 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7016 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7017 is1=\E[?47l\E=\E[?1l,
7018 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
7019 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
7020 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
7021 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
7022 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7023 kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~,
7024 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7025 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7026 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
7027 kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~,
7028 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7029 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a,
7030 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~,
7031 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7032 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m,
7034 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
7035 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
7037 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
7039 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
7041 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
7042 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
7045 dvtm-256color|dynamic virtual terminal manager with 256 colors,
7046 colors#0x100, pairs#0x10000,
7047 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
7049 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
7055 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
7056 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
7057 # been maintained until recently by the National Center for Supercomputer
7058 # Applications, and it is feature rich, stable and free. It can be downloaded
7059 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
7060 # xterm+sl, and the docs at NCSA. It works well.
7062 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
7063 # The terminal options should be set as follows:
7064 # Xterm sequences ON
7065 # use VT wrap mode ON
7066 # use Emacs arrow keys OFF
7067 # CTRL-COMND is Emacs meta ON
7069 # answerback string: "ncsa-vt220-8"
7070 # setup keys: all disabled
7072 # Application mode is not used.
7074 # Other special mappings:
7081 # PAGEDOWN Next Screen
7083 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
7086 # The status-line manipulation is a mapping of the xterm-compatible control
7087 # sequences for setting the window-title. So you must use tsl and fsl in
7088 # pairs, since the latter ends the string that is loaded to the window-title.
7089 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7090 am, km, mir, msgr, xenl,
7091 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7092 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7093 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7094 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7095 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7096 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7097 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7098 el=\E[K, el1=\E[1K, enacs=\E)0,
7099 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7100 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
7101 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
7102 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
7103 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7104 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
7105 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
7106 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
7107 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
7108 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
7109 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
7110 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
7111 rmso=\E[27m, rmul=\E[24m,
7112 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
7113 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
7115 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
7116 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7117 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
7118 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7119 use=ncsa-m, use=klone+color,
7120 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7122 dsl@, fsl@, tsl@, use=ncsa,
7123 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7125 dsl@, fsl@, tsl@, use=ncsa-m,
7127 # The documented function-key mapping refers to the Apple Extended Keyboard
7128 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
7129 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
7130 # some keyboards and many applications require these as F1-F4.
7132 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
7133 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7134 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
7135 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
7136 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
7137 kf8=\E[19~, kf9=\E[20~, use=ncsa,
7139 #### Pilot Pro Palm-Top
7141 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
7142 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
7143 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
7146 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
7147 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
7148 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
7151 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
7152 # These entries are for the Embeddable Linux Kernel System (ELKS)
7153 # project - an heavily stripped down Linux to be run on 16 bit
7154 # boxes or, eventually, to be used in embedded systems - and have been
7155 # adapted from the stock ELKS termcap. The project itself looks stalled,
7156 # and the latest improvements I know of date back to March 2000.
7158 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
7159 # as an added bonus, this deals with all the capabilities common to
7160 # both VT52 and ANSI (or, eventually, "special") modes.
7162 elks-glasstty|ELKS glass-TTY capabilities,
7164 cols#80, it#8, lines#25,
7165 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
7168 elks-vt52|ELKS vt52 console,
7169 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
7170 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
7171 home=\EH, use=elks-glasstty,
7173 elks-ansi|ELKS ANSI console,
7174 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7175 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7176 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
7178 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
7179 # instead of VT52, but the "elks" entry still refers to the latter.
7181 elks|default ELKS console,
7184 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
7185 # one but in screen size
7187 sibo|ELKS SIBO console,
7188 cols#61, it#8, lines#20, use=elks-vt52,
7190 ######## COMMERCIAL WORKSTATION CONSOLES
7196 # This is from the OSF/1 Release 1.0 termcap file
7197 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
7200 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7201 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7202 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
7203 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7204 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7209 # :is1: resets scrolling region in case a previous user had used "tset vt100"
7210 oldsun|Sun Microsystems Workstation console,
7211 OTbs, am, km, mir, msgr,
7212 cols#80, it#8, lines#34,
7213 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
7214 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7215 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7216 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7217 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7218 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
7219 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7220 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
7221 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
7222 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
7223 sun-il|Sun Microsystems console with working insert-line,
7226 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7227 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7228 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7229 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7230 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7231 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
7232 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
7233 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
7234 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
7235 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
7236 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
7237 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7238 smso=\E[7m, u8=\E[1t, u9=\E[11t,
7239 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
7240 # flake out on the last line. Unfortunately, without them the terminal has no
7242 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
7243 il@, il1@, use=sun-il,
7244 # If you are using an SS5, change the sun definition to use sun-ss5.
7245 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
7248 sun+sl|Sun Workstation window status line,
7250 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
7252 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
7253 sun-s|Sun Microsystems Workstation window with status line,
7255 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
7256 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
7258 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
7259 sun-48|Sun 48-line window,
7260 cols#80, lines#48, use=sun,
7261 sun-34|Sun 34-line window,
7262 cols#80, lines#34, use=sun,
7263 sun-24|Sun 24-line window,
7264 cols#80, lines#24, use=sun,
7265 sun-17|Sun 17-line window,
7266 cols#80, lines#17, use=sun,
7267 sun-12|Sun 12-line window,
7268 cols#80, lines#12, use=sun,
7269 sun-1|Sun 1-line window for sysline,
7272 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
7273 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
7274 ich1@, rmir@, smir@, use=sun,
7275 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
7277 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
7278 sun-type4|Sun Workstation console with type 4 keyboard,
7279 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
7280 kcuu1=\E[215z, use=sun-il,
7282 # Most of the current references to sun-color are from users wondering why this
7283 # is the default on install. Details from reading the wscons manpage, adding
7284 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
7285 # when those were added -TD (2005-05-28)
7287 # According to wscons manpage, color is supported only on IA systems.
7288 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
7289 # does not list these. It also sets ncv#3, however that corresponds to
7290 # underline and standout.
7292 # Since the documentation and terminfo do not agree, see also current code at
7293 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
7295 # That (actually a different driver which "supports" sun-color) also supports
7302 # It supports bold, but not underline -TD (2009-09-19)
7303 sun-color|Sun Microsystems Workstation console with color support (IA systems),
7304 colors#8, ncv#3, pairs#64,
7305 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
7306 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
7307 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7308 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7310 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7312 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7313 smso=\E[7m, use=sun,
7318 # (wsiris: this had extension capabilities
7319 # :HS=\E7F2:HE=\E7F7:\
7320 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
7321 # See the note on Iris extensions near the end of this file.
7322 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
7323 # <flash> from BRL -- esr)
7324 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
7325 OTbs, OTnc, OTpt, am,
7326 OTkn#3, cols#80, it#8, lines#40,
7327 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
7328 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
7329 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
7330 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
7331 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
7332 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
7333 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
7334 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
7339 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
7340 # environment). Note: these have nothing to do with Sony's News workstation
7344 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
7345 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
7346 psterm|psterm-basic|NeWS psterm-80x34,
7347 OTbs, am, hs, km, ul,
7348 cols#80, it#8, lines#34,
7349 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
7350 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
7351 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
7352 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
7353 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
7354 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
7355 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
7357 psterm-96x48|NeWS psterm 96x48,
7358 cols#96, lines#48, use=psterm,
7359 psterm-90x28|NeWS psterm 90x28,
7360 cols#90, lines#28, use=psterm,
7361 psterm-80x24|NeWS psterm 80x24,
7362 cols#80, lines#24, use=psterm,
7363 # This is a faster termcap for psterm. Warning: if you use this termcap,
7364 # some control characters you type will do strange things to the screen.
7365 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
7366 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
7367 OTbs, am, hs, km, ul,
7368 cols#80, it#8, lines#34,
7369 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
7370 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
7371 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
7372 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7373 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
7374 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
7375 smso=^Oo, smul=^Ou, tsl=^Ol,
7379 # Use `glasstty' for the Workspace application
7382 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
7385 cols#80, it#8, lines#24,
7386 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7387 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7388 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
7389 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
7390 nextshell|NeXT Shell application,
7393 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
7396 #### Sony NEWS workstations
7399 # (news-unk: this had :KB=news: -- esr)
7400 news-unk|SONY NEWS vt100 emulator common entry,
7401 OTbs, OTpt, am, xenl,
7403 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
7404 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
7405 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
7406 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
7407 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
7408 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
7409 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
7410 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
7411 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
7412 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7413 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
7414 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7416 # (news-29: this had :TY=ascii: --esr)
7417 news-29|SONY NEWS vt100 emulator with 29 lines,
7418 lines#29, use=news-unk,
7419 # (news-29-euc: this had :TY=euc: --esr)
7420 news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
7422 # (news-29-sjis: this had :TY=sjis: --esr)
7423 news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
7426 # (news-33: this had :TY=ascii: --esr)
7427 news-33|SONY NEWS vt100 with 33 lines,
7428 lines#33, use=news-unk,
7429 # (news-33-euc: this had :TY=euc: --esr)
7430 news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
7432 # (news-33-sjis: this had :TY=sjis: --esr)
7433 news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
7436 # (news-42: this had :TY=ascii: --esr)
7437 news-42|SONY NEWS vt100 with 42 lines,
7438 lines#42, use=news-unk,
7439 # (news-42-euc: this had :TY=euc: --esr)
7440 news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
7442 # (news-42-sjis: this had :TY=sjis: --esr)
7443 news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
7446 # NEWS-OS old termcap entry
7448 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
7449 news-old-unk|SONY NEWS vt100 emulator common entry,
7450 OTbs, OTpt, am, xenl,
7452 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
7453 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
7454 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
7455 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
7456 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
7457 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
7458 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7459 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7460 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7462 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
7463 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
7466 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7470 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
7471 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
7473 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
7476 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
7477 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
7480 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7484 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
7485 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
7488 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7492 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
7493 # also the alias vt100-bm.
7494 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
7497 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
7501 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
7502 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
7505 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7509 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
7510 news28|sony vt100 emulator 28 lines,
7513 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
7517 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
7518 news29|news28-a|sony vt100 emulator 29 lines,
7520 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
7524 # (news511: this had :TY=sjis: --esr)
7525 nwp511|nwp-511|nwp-511 vt100,
7526 OTbs, OTpt, am, xenl,
7528 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7529 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
7530 ed=\E[J$<30/>, el=\E[K$<3/>,
7531 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7532 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
7533 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
7534 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
7535 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7536 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
7537 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7538 # (news517: this had :TY=sjis:. --esr)
7539 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
7542 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7543 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7544 tsl=\E[1$}\E[;%df, use=vt200,
7545 # (news517-w: this had :TY=sjis:. --esr)
7546 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
7549 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7550 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7551 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7552 tsl=\E[1$}\E[;%df, use=vt200,
7554 #### Common Desktop Environment
7557 # This ships with Sun's CDE in Solaris 2.5
7558 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
7559 dtterm|CDE desktop terminal,
7560 am, mir, msgr, xenl, xon,
7561 cols#80, it#8, lines#24, lm#0, ncv@,
7562 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7563 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7564 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
7565 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7566 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7567 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7568 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7569 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7570 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
7571 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7572 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
7573 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7574 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
7575 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
7576 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
7577 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
7578 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7579 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
7580 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7581 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
7583 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7584 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7585 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7586 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
7588 ######## Non-Unix Consoles
7591 #### EMX termcap.dat compatibility modes
7593 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
7594 # no_color_video to inform the application that standout(1), underline(2)
7595 # reverse(4) and invisible(64) don't work with color.
7596 emx-base|DOS special keys,
7599 bel=^G, use=ansi.sys,
7601 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
7602 # a Unix-style environment used on OS/2. (Note that the suffix makes some
7603 # names longer than 14 characters, the nominal maximum).
7605 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
7606 ansi-emx|ANSI.SYS color,
7607 am, bce, eo, mir, msgr, xon,
7608 colors#8, cols#80, it#8, lines#25, pairs#64,
7609 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7610 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H,
7611 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7612 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
7613 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7614 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
7615 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
7616 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
7617 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
7618 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
7619 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
7620 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
7621 # nice colors for Emacs (white on blue, mode line white on cyan)
7622 ansi-color-2-emx|ANSI.SYS color 2,
7623 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
7624 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
7625 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
7626 smul=\E[1;36;44m, use=ansi-emx,
7627 # nice colors for Emacs (white on black, mode line black on cyan)
7628 ansi-color-3-emx|ANSI.SYS color 3,
7629 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
7630 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
7631 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
7632 smul=\E[0;36;40m, use=ansi-emx,
7633 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
7635 cols#80, it#8, lines#24,
7636 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7637 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7638 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
7639 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
7640 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
7641 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
7646 # Use this for cygwin32 (tested with beta 19.1)
7647 # underline is colored bright magenta
7648 # shifted kf1-kf12 are kf11-kf22
7649 cygwinB19|ansi emulation for cygwin32,
7650 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7651 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7652 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7653 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7654 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7655 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7656 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
7659 # Use this for cygwin (tested with version 1.1.0).
7660 # I've combined pcansi and linux. Some values of course were different and
7661 # I've indicated which of these were and which I used.
7662 # Cheers, earnie_boyd@yahoo.com
7663 # several changes based on running with tack and comparing with older entry -TD
7664 # more changes from csw:
7666 # remove eo [erase overstrike with blank]
7667 # change clear was \E[H\E[J now \E[2J (faster?)
7670 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
7672 # add cub [cursor back param]
7673 # add cuf [cursor forward param]
7674 # add cuu [cursor up param]
7675 # add cud [cursor down param]
7676 # add hs [has status line]
7677 # add fsl [return from status line]
7678 # add tsl [go to status line]
7679 # add smacs [Start alt charset] (not sure if this works)
7680 # add rmacs [End alt charset] (ditto)
7681 # add smcup [enter_ca_mode] (save console; thanks Corinna)
7682 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
7683 # add kb2 [center of keypad]
7684 # add u8 [user string 8] \E[?6c
7685 # add el [clear to end of line] \E[K
7687 # cnorm [make cursor normal] not implemented
7688 # flash [flash] not implemented
7689 # blink [blink] not implemented very usefully in cygwin? \E[5m
7690 # dim [dim] not implemented very usefully in cygwin? \E[2m
7691 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
7692 # kNXT [shifted next key] not implemented
7693 # kPRV [shifted prev key] not implemented
7694 # khome [home key] really is \E[1~ NOT \E[H
7695 # tbc [clear tab stops] not implemented
7696 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
7697 # smpch [Start PC charset] is \E[11m, same as smacs
7698 # rmpch [End PC charset] is \E[10m, same as rmacs
7699 # mir [move in insert mode] fails in tack?
7700 # bce [back color erase] causes problems with change background color?
7701 # cvvis [make cursor very visible] causes a stackdump when testing with
7702 # testcurs using the output option? \E[?25h\E[?8c
7703 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
7704 # ech [erase characters param] broken \E[%p1%dX
7705 # kcbt [back-tab key] not implemented in cygwin? \E[Z
7708 # Remove cbt since it does not work in current cygwin
7709 # Add 'mir' and 'in' flags based on tack
7710 cygwin|ansi emulation for Cygwin,
7711 am, hs, mir, msgr, xon,
7712 colors#8, it#8, pairs#64,
7713 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7714 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7715 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7716 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
7717 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7718 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7719 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7720 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
7721 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7722 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
7723 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7724 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7725 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7726 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7727 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7728 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7729 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
7730 nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7731 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
7732 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
7733 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7734 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
7735 %t;8%;%?%p9%t;11%;m,
7736 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
7737 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
7738 vpa=\E[%i%p1%dd, use=vt102+enq,
7740 # I've supplied this so that you can help test new values and add other
7741 # features. Cheers, earnie_boyd@yahoo.com.
7743 # Some features are from pcansi. The op value is from linux. Function-keys
7744 # are from linux. These have been tested not to cause problems. xenl was in
7745 # this list, but DOES cause problems so it has been removed
7746 cygwinDBG|Debug Version for Cygwin,
7747 am, eo, mir, msgr, xon,
7748 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7749 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7750 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7751 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7752 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7753 cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
7754 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7755 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7756 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7757 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7758 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
7759 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7760 il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
7761 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7762 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
7763 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7764 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7765 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
7766 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7767 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7768 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[39;49m,
7769 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
7770 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7771 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7772 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7773 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
7774 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
7775 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
7780 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
7781 # encodings used by other x86 environments. All others are invented for DJGPP.
7782 # Oddly enough, while several combinations of modifiers are tabulated, there is
7783 # none for shifted cursor keys.
7835 # Ctrl-Delete \E[43~
7836 # Ctrl-Down Arrow \E[38~
7839 # Ctrl-Insert \E[42~
7840 # Ctrl-Left Arrow \E[39~
7841 # Ctrl-Page Down \E[46~
7842 # Ctrl-Page Up \E[45~
7843 # Ctrl-Right Arrow \E[40~
7844 # Ctrl-Up Arrow \E[37~
7860 # Alt-Down Arrow \E[60~
7864 # Alt-Left Arrow \E[61~
7865 # Alt-Page Down \E[68~
7866 # Alt-Page Up \E[67~
7867 # Alt-Right Arrow \E[62~
7868 # Alt-Up Arrow \E[59~
7897 djgpp|ansi emulation for DJGPP alpha,
7898 am, bce, msgr, xhp, xon, xt,
7899 colors#8, it#8, pairs#64,
7900 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7901 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7902 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7903 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7904 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
7905 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7906 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7907 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7908 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7909 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
7910 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7911 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
7912 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7913 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
7914 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
7915 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7916 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n,
7917 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
7918 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7919 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
7920 %p6%t;1%;%?%p7%t;8%;m,
7921 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7923 djgpp203|Entry for DJGPP 2.03,
7925 cols#80, it#8, lines#25,
7926 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
7929 djgpp204|Entry for DJGPP 2.04,
7931 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
7932 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7933 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
7934 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7935 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7936 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
7937 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
7938 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7939 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
7940 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7941 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
7942 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7943 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7944 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\r\n, rev=\E[7m,
7945 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
7946 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7950 # This is tested using U/Win's telnet. Scrolling is omitted because it is
7951 # buggy. Another odd bug appears when displaying "~" in alternate character
7952 # set (the emulator spits out error messages). Compare with att6386 -TD
7953 uwin|U/Win 3.2 console,
7954 am, eo, in, msgr, xenl, xon,
7955 colors#8, it#8, ncv#58, pairs#64,
7956 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7957 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7958 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7959 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7960 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
7961 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7962 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
7963 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
7964 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7965 kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, kf1=\EOP,
7966 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
7967 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
7968 khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, rc=\E8,
7969 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
7970 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7971 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
7972 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
7973 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
7975 #### Microsoft (miscellaneous)
7977 # This entry fits the Windows NT console when the _POSIX_TERM environment
7978 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
7979 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
7980 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
7981 # systems is not, and (surprise!) they match very well.
7983 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
7984 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
7985 # are the installation instructions a pile of mind-numbing bureaucratese,
7986 # but the termcap entry is actually broken and unusable as given; the :do:
7987 # capability is misspelled "d".
7989 # To use this, you need to a bunch of environment variables:
7991 # SET _POSIX_TERM=on
7993 # SET TERMCAP=location of termcap file in POSIX file format
7994 # which is case-sensitive.
7995 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
7998 # Important note: setting the TMP environment variable in POSIX style renders
7999 # it incompatible with a lot of other applications, including Visual C++. So
8000 # you should have a separate command window just for vi. All the other
8001 # variables may be permanently set in the Control Panel\System applet.
8003 # You can find out more about the restrictions of this facility at
8004 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
8006 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
8007 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
8009 cols#80, it#8, lines#25,
8010 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8011 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
8012 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
8013 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
8014 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
8015 # From: jew@venus.sunquest.com
8016 # Date: 19 Feb 93 23:41:07 GMT
8017 # Here's a combination of ansi and vt100 termcap
8018 # entries that works nearly perfectly for me
8019 # (Gateway 2000 Handbook and Microsoft Works 3.0):
8020 pcmw|PC running Microsoft Works,
8022 cols#80, it#8, lines#24, vt#3,
8023 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
8024 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
8025 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
8026 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
8027 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
8028 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
8029 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
8030 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
8031 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
8032 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8033 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
8036 # From: Federico Bianchi
8037 # This is the entry for the OpenNT terminal.
8038 # The ntconsole name is for backward compatibility.
8039 # This is for OpenNT 2.0 and later.
8040 # Later OpenNT was renamed to Interix.
8042 # Presently it is distributed by Microsoft as Services For Unix (SFU).
8043 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
8044 # the documentation dated from 1.9.9e) -TD
8046 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
8047 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
8048 # kf13-kf24 use the shift-key
8049 # kf25-kf36 use the left alt-key
8050 # kf37-kf38 use the control-key
8051 # kf49-kf60 use the shift- and control-keys
8052 # The shifted cursor keys send the sequences originally used for kf61-kf64:
8055 # left=\EF^ (unassigned)
8058 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
8060 cols#80, it#8, lines#25,
8061 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8062 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8063 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8064 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
8065 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
8066 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8067 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
8068 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
8069 indn=\E[%p1%dS, kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z,
8070 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
8071 kend=\E[U, kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB,
8072 kf12=\EFC, kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG,
8073 kf17=\EFH, kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK,
8074 kf21=\EFL, kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP,
8075 kf26=\EFQ, kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3,
8076 kf30=\EFU, kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY,
8077 kf35=\EFZ, kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd,
8078 kf4=\EF4, kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh,
8079 kf44=\EFi, kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn,
8080 kf49=\EFo, kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr,
8081 kf53=\EFs, kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw,
8082 kf58=\EFx, kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7,
8083 kf8=\EF8, kf9=\EF9, khome=\E[H, kich1=\E[L, kind=\EF+,
8084 kll=\E[U, knp=\E[T, kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n,
8085 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
8086 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
8087 sc=\E[s, setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
8088 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
8089 use=ansi+rep, use=klone+color,
8091 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
8092 lines#35, use=opennt,
8094 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
8095 lines#50, use=opennt,
8097 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
8098 lines#60, use=opennt,
8100 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
8101 lines#100, use=opennt,
8103 # OpenNT wide terminals
8104 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
8105 cols#125, use=opennt,
8107 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
8108 lines#35, use=opennt-w,
8110 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
8111 lines#50, use=opennt-w,
8113 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
8114 lines#60, use=opennt-w,
8116 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
8117 cols#132, use=opennt,
8119 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
8120 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
8121 rmcup@, smcup@, use=opennt,
8123 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
8124 lines#35, use=opennt-nti,
8126 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
8127 lines#50, use=opennt-nti,
8129 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
8130 lines#60, use=opennt-nti,
8132 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
8133 lines#100, use=opennt-nti,
8135 ######## COMMON TERMINAL TYPES
8137 # This section describes terminal classes and maker brands that are still
8138 # quite common, but have proprietary command sets not blessed by ANSI.
8143 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
8144 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
8145 # Acer has a web site at http://www.acer.com.
8147 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
8148 # His comments suggest they were shipped with the system.
8151 # (altos2: had extension capabilities
8152 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8153 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8154 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8155 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8156 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8157 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
8158 # :HL=^AP\r:SP=\E[i:\
8159 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
8160 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
8161 # Comparison with the k* capabilities makes it obvious that the c* things are
8162 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
8163 # :sr: was given as a boolean-- esr)
8164 altos2|alt2|altos-2|altos II,
8165 cols#80, it#8, lines#24, xmc#0,
8166 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
8167 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
8168 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
8169 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
8170 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
8171 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
8172 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
8173 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8174 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8175 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8176 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8177 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
8178 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
8179 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
8180 # (altos3: had extension capabilities
8181 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8182 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8183 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8184 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8185 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8186 # :HL=^AP\r:SP=\E[i:\
8187 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
8188 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
8189 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
8190 altos4|alt4|altos-4|altos IV,
8192 # (altos7: had extension capabilities:
8193 # :GG#0:GI=\EH8:GF=\EH7:\
8194 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8195 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8196 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8197 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8198 # Comparison with the k* capabilities makes it obvious that the c* things are
8199 # shift keys. I have renamed them to keys 32 and up accordingly. I have
8200 # also made this entry relative to adm12 in order to give it an <sgr>. The
8201 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
8202 altos7|alt7|altos VII,
8204 cols#80, lines#24, xmc#0,
8205 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
8206 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8207 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8208 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
8210 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
8211 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
8212 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
8213 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8214 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8215 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8216 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8217 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
8218 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
8219 rmir=\Er, smir=\Eq, use=adm+sgr,
8220 altos7pc|alt7pc|altos PC VII,
8221 kend=\ET, use=altos7,
8223 #### Hewlett-Packard (hp)
8226 # 8000 Foothills Blvd
8227 # Roseville, CA 95747
8228 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
8229 # 1-(800)-633-3600 (General customer support)
8232 # As of March 1998, HP no longer has any terminals in production.
8233 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
8234 # supported (they still have parts). So are the 2392a and 2394a.
8235 # See the WORKSTATION CONSOLES section for the 700s.
8238 # Generic HP terminal - this should (hopefully) work on any HP terminal.
8239 hpgeneric|hp|hewlett-packard generic terminal,
8240 OTbs, OTpt, am, da, db, mir, xhp,
8241 cols#80, lines#24, lm#0, vt#6,
8242 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8243 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
8244 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
8245 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
8246 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
8249 hp110|hewlett-packard model 110 portable,
8250 lines#16, use=hpgeneric,
8252 hp+pfk+cr|hp function keys with CR,
8253 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
8254 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
8256 hp+pfk-cr|hp function keys w/o CR,
8257 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
8260 # The hp2621s use the same keys for the arrows and function keys,
8261 # but not separate escape sequences. These definitions allow the
8262 # user to use those keys as arrow keys rather than as function
8264 hp+pfk+arrows|hp alternate arrow definitions,
8265 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
8266 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
8267 kll=\Eq\r, kri=\Es\r,
8269 hp+arrows|hp arrow definitions,
8270 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8271 kind=\ES, kll=\EF, kri=\ET,
8273 # Generic stuff from the HP 262x series
8275 hp262x|HP 262x terminals,
8277 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
8278 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8279 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8280 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
8281 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8282 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8283 %;%?%p4%t%{65}%|%;%c,
8284 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
8286 # Note: no <home> on HPs since that homes to top of memory, not screen.
8287 # Due to severe 2621 braindamage, the only way to get the arrow keys to
8288 # transmit anything at all is to turn on the function key labels
8289 # with <smkx>, and even then the user has to hold down shift!
8290 # The default 2621 turns off the labels except when it has to to
8291 # enable the function keys. If your installation prefers labels
8292 # on all the time, or off all the time (at the "expense" of the
8293 # function keys), use 2621-nl or 2621-wl.
8295 # Note: there are newer ROMs for 2621's that allow you to set
8296 # strap A so the regular arrow keys xmit \EA, etc, as with the
8297 # 2645. However, even with this strap set, the terminal stops
8298 # xmitting if you reset it, until you unset and reset the strap!
8299 # Since there is no way to set/unset the strap with an escape
8300 # sequence, we don't use it in the default.
8301 # If you like, you can use 2621-ba (brain-damaged arrow keys).
8302 hp2621-ba|2621 w/new rom and strap A set,
8303 rmkx@, smkx@, use=hp+arrows, use=hp2621,
8305 # hp2621 with function labels. Most of the time they are off,
8306 # but inside vi, the function key labels appear. You have to
8307 # hold down shift to get them to xmit.
8308 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
8309 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
8313 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
8314 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
8315 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
8316 use=hp+pfk+cr, use=hpgeneric,
8318 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
8319 hp2621p|hp 2621 with printer,
8320 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
8322 hp2621p-a|hp2621p with fn as arrows,
8323 use=hp+pfk+arrows, use=hp2621p,
8325 # hp2621 with k45 keyboard
8326 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
8327 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8328 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
8330 # 2621 using all 48 lines of memory, only 24 visible at any time.
8331 hp2621-48|48 line 2621,
8333 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
8336 # 2621 with no labels ever. Also prevents vi delays on escape.
8337 hp2621-nl|hp 2621 with no labels,
8338 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
8341 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
8344 hp2621-nt|hp 2621 w/no tabs,
8347 # Hp 2624 B with 4 or 10 pages of memory.
8349 # Some assumptions are made with this entry. These settings are
8350 # NOT set up by the initialization strings.
8352 # Port Configuration
8357 # Terminal Configuration
8363 # Note: the 2624 DOES have a true <home>, believe it or not!
8365 # The 2624 has an "error line" to which messages can be sent.
8366 # This is CLOSE to what is expected for a "status line". However,
8367 # after a message is sent to the "error line", the next carriage
8368 # return is EATEN and the "error line" is turned back off again!
8369 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
8371 # This entry supports emacs (and any other program that uses raw
8372 # mode) at 4800 baud and less. I couldn't get the padding right
8375 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
8376 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
8379 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
8381 # This hp2626 entry does not use any of the fancy windowing stuff
8384 # Indeed, terminfo does not yet handle such stuff. Since changing
8385 # any window clears memory, it is probably not possible to use
8386 # this for screen opt.
8388 # ed is incredibly slow most of the time - I am guessing at the
8389 # exact padding. Since the terminal uses xoff/xon this is intended
8390 # only for cost computation, so that the terminal will prefer el
8391 # or even dl1 which is probably faster!
8393 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
8394 # extra slow on the last line of the window.
8396 # The padding probably should be changed.
8398 hp2626|hp2626a|hp2626p|hp 2626,
8401 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
8402 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
8403 use=hp+labels, use=scrhp,
8405 # This entry is for sysline. It allocates a 23 line window with
8406 # a 115 line workspace for regular use, and a 1 line window for
8409 # This assumes port 2 is being used.
8410 # Turn off horizontal line, Create ws #1 with 115 lines,
8411 # Create ws #2 with 1 line, Create window #1 lines 1-23,
8412 # Create window #2 lines 24-24, Attach cursor to workspace #1.
8413 # Note that this clears the tabs so it must be done by tset before
8416 hp2626-s|hp 2626 using only 23 lines,
8419 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
8420 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
8421 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
8422 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
8423 # Force terminal back to 24 lines after being 23.
8424 hp2626-ns|hp 2626 using all 24 lines,
8425 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
8426 \s\E&w3f2I\s\E&w7f2p1I\s\r,
8428 # Various entries useful for small windows on 2626.
8429 hp2626-12|hewlett-packard 2626 12 lines,
8430 lines#12, use=hp2626,
8431 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
8432 cols#40, lines#12, use=hp2626,
8433 hp2626-x40|hewlett-packard 2626 40 columns,
8434 cols#40, use=hp2626,
8435 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
8436 lines#11, use=hp2626-s,
8439 # hp2627 color tubes from University of Wisconsin
8441 hp2627a-rev|hp 2627 with reverse video colors,
8442 cr=\r, cud1=\n, ht=^I, ind=\n,
8443 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
8445 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
8446 smul=\E&dD\E&v1S, use=hp2621-nl,
8447 hp2627a|hp 2627 color terminal with no labels,
8448 cr=\r, cud1=\n, ht=^I, ind=\n,
8449 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
8450 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
8451 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
8453 hp2627c|hp 2627 color (cyan) terminal with no labels,
8454 cr=\r, cud1=\n, ht=^I, ind=\n,
8455 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
8456 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
8458 # hp2640a doesn't have the Y cursor addressing feature, and C is
8459 # memory relative instead of screen relative, as we need.
8462 cup@, rmkx@, smkx@, use=hp2645,
8464 hp2640b|hp2644a|hp 264x series,
8465 rmkx@, smkx@, use=hp2645,
8467 # (hp2641a: removed unknown :gu: -- esr)
8468 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
8469 am, da, db, mir, xhp,
8471 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8472 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8473 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
8474 if=/usr/share/tabset/std, il1=\EL, ind=\n,
8475 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8476 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8479 # This terminal should be used at 4800 baud or less. It needs padding for
8480 # plain characters at 9600, I guessed at an appropriate cr delay. It really
8481 # wants ^E/^F handshaking, but that doesn't work well even if you write
8482 # software to support it.
8483 hp2645|hp45|HP 2645 series,
8485 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
8486 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8487 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
8488 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
8490 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8491 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
8492 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
8493 # You should use this terminal at 4800 baud or less.
8494 hp2648|hp2648a|HP 2648a graphics terminal,
8495 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
8496 dch1=\EP$<7>, ip=$<5>, use=hp2645,
8498 # The HP 150 terminal is a fairly vanilla HP terminal, with the
8499 # clreol standout problem. It also has graphics capabilities and
8500 # a touch screen, which we don't describe here.
8501 hp150|hewlett packard Model 150,
8504 # HP 2382a terminals, "the little ones." They don't have any
8505 # alternate character set support and sending out ^N/^O will
8506 # leave the screen blank.
8507 hp2382a|hp2382|hewlett packard 2382a,
8511 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8514 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8515 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8516 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8518 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
8520 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
8521 use=hp+pfk+arrows, use=hp2621-fl,
8523 # newer hewlett packard terminals
8525 newhpkeyboard|generic entry for HP extended keyboard,
8526 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8527 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8528 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
8529 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
8532 newhp|generic entry for new hewlett packard terminals,
8533 am, bw, mir, xhp, xon,
8534 cols#80, lines#24, pb#4800,
8535 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
8537 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
8538 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
8539 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
8540 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
8541 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
8542 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
8543 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
8544 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
8545 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8546 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8547 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8548 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
8549 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
8550 tbc=\E3, use=newhpkeyboard,
8552 memhp|memory relative addressing for new HP ttys,
8554 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
8555 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
8556 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
8557 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
8559 scrhp|screen relative addressing for new HP ttys,
8560 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
8561 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
8562 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
8563 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
8564 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
8566 # (hp+labels: added label values from a BRL termcap -- esr)
8567 hp+labels|"standard" label info for new HP ttys,
8569 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
8570 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8572 rmln=\E&j@, smln=\E&jB,
8574 hp+printer|"standard" printer info for HP ttys,
8575 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
8578 # The new hp2621b is kind of a cross between the old 2621 and the
8579 # new 262x series of machines. It has dip-switched options.
8580 # The firmware has a bug in it such that if you give it a null
8581 # length label, the following character is eaten!
8582 hp2621b|hp 2621b with old style keyboard,
8583 lh#1, lm#48, lw#8, nlab#8,
8584 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8585 kind=\ET, kll=\EF, kri=\ES,
8586 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
8587 %;%p2%s\E%{111}%p1%+%c\r,
8588 smln=\E&jB, use=hp2621,
8590 hp2621b-p|hp 2621b with printer,
8591 use=hp+printer, use=hp2621b,
8593 # hp2621b - new 2621b with new extended keyboard
8594 # these are closer to the new 26xx series than the other 2621b
8595 hp2621b-kx|hp 2621b with extended keyboard,
8596 use=newhpkeyboard, use=hp2621b,
8598 hp2621b-kx-p|hp 2621b with new keyboard & printer,
8599 use=hp+printer, use=hp2621b-kx,
8601 # Some assumptions are made in the following entries.
8602 # These settings are NOT set up by the initialization strings.
8604 # Port Configuration
8605 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
8607 # Terminal Configuration
8608 # InhHndShk(G)=Yes InhDC2(H)=Yes
8609 # XmitFnctn(A)=No InhEolWrp=No
8612 # Hp 2622a & hp2623a display and graphics terminals
8614 hp2622|hp2622a|hp 2622,
8617 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
8619 # The 2623 is a 2622 with extra graphics hardware.
8620 hp2623|hp2623a|hp 2623,
8623 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
8624 use=hp+printer, use=hp2624,
8626 # The hewlett packard B can have an optional extra 6 pages of memory.
8627 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
8630 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
8631 lm#240, use=hp2624b-p,
8633 # Color manipulations for HP terminals
8634 hp+color|hp with colors,
8636 colors#16, ncv#17, pairs#7,
8637 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
8638 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
8639 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
8640 %t1%e.%p7%d%;z%p1%dI,
8641 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
8642 I\E&v1b1c6I\E&v1x1y7I,
8643 op=\E&v0S, scp=\E&v%p1%dS,
8645 # <is2> sets the screen to be 80 columns wide
8646 hp2397a|hp2397|hewlett packard 2397A color terminal,
8647 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
8649 # HP 700/44 Setup parameters:
8650 # Terminal Mode HP-PCterm
8651 # Inhibit Auto Wrap NO
8652 # Status Line Host Writable
8653 # PC Character Set YES
8654 # Twenty-Five Line Mode YES
8655 # XON/XOFF @128 or 64 (sc)
8656 # Keycode Mode NO or YES (sc)
8657 # Backspace Key BS or BS/DEL
8659 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
8660 # \E\\? does not turn off keycode mode
8661 # <smsc> sets alternate start/stop; keycode on
8662 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
8665 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
8667 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
8668 cnorm=\E[?25h, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8669 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8670 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
8672 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
8673 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8674 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
8675 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
8676 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
8677 kpp=\E[5~, rmam=\E[?7l,
8678 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
8679 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
8680 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
8681 smul=\E[4m, xoffc=g, xonc=e,
8683 # (hp2392: copied <rmir> here from hpex -- esr)
8686 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
8687 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
8688 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
8689 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
8692 hpsub|hp terminals -- capability subset,
8693 am, da, db, mir, xhp, xon,
8695 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8696 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
8697 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
8698 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
8699 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
8700 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
8703 # May be used for most 24 x 80 hp terminals,
8704 # but has no padding added, so may allow runover in some terminals at high
8705 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
8706 # hp98x5 terminal emulators or hp98x6 consoles.
8707 # Adds xy-cursor addressing, vertical cursor addressing, home,
8708 # last line, and underline capabilities.
8710 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
8711 # moved <rmir> here from hpsub -- esr)
8712 hpex|hp extended capabilities,
8713 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
8714 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
8715 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
8717 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
8718 hp2|hpex2|hewlett-packard extended capabilities newer version,
8719 am, da, db, mir, xhp,
8720 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
8721 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8722 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8723 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8724 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8725 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8726 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8727 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8728 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8729 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
8730 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
8731 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
8732 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
8733 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
8734 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8735 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
8736 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
8737 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8738 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8741 # From: <ddavis@ic.berkeley.edu>
8742 hp236|hp236 internal terminal emulator,
8745 clear=\EF, cnorm=\EDE, cub1=^H,
8746 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
8747 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
8748 sgr0=\ECI, smso=\EBI,
8750 # This works on a hp300 console running Utah 4.3 BSD
8751 # From: Craig Leres <leres@okeeffe.berkeley.edu>
8752 hp300h|HP Catseye console,
8753 OTbs, am, da, db, mir, xhp,
8754 cols#128, lines#51, lm#0, xmc#0,
8755 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8756 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8757 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8758 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
8759 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8760 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
8761 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
8763 # From: Greg Couch <gregc@ernie.berkeley.edu>
8764 hp9837|hp98720|hp98721|HP 9000/300 workstations,
8765 OTbs, am, da, db, mir, xhp,
8766 cols#128, it#8, lines#46, lm#0,
8767 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
8768 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8769 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8770 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
8771 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8772 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
8773 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
8774 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
8775 tbc=\E3, vpa=\E&a%p1%dY,
8776 # HP 9845 desktop computer from BRL
8777 # (hp9845: removed unknown capability :gu: -- esr)
8779 OTbs, am, da, db, eo, mir, xhp,
8781 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8782 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8783 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
8784 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8785 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
8786 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
8787 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
8788 hp98550|hp98550a|HP 9000 Series 300 color console,
8789 OTbs, am, da, db, mir, xhp,
8790 cols#128, it#8, lines#49, lm#0,
8791 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
8792 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8793 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
8794 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8795 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
8796 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8797 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
8798 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
8799 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
8800 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
8801 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8802 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
8803 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8804 # From: Victor Duchovni <vic@fine.princeton.edu>
8805 # (hp700-wy: removed obsolete ":nl=^J:";
8806 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
8807 hp700-wy|HP700/41 emulating wyse30,
8808 OTbs, am, bw, mir, msgr,
8809 cols#80, it#8, lines#24, xmc#1,
8810 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
8811 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8812 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
8813 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
8814 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
8815 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
8816 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
8817 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
8818 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
8819 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
8820 hp70092|hp70092a|hp70092A|HP 700/92,
8822 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
8823 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
8824 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
8825 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
8826 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8827 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8828 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8829 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8830 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8831 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8832 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
8833 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8834 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8835 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8837 bobcat|sbobcat|HP 9000 model 300 console,
8838 am, da, db, mir, xhp,
8839 cols#128, it#8, lines#47, xmc#0,
8840 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8841 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
8842 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
8843 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
8844 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
8845 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
8846 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
8847 gator-t|HP 9000 model 237 emulating extra-tall AAA,
8848 lines#94, use=gator,
8849 gator|HP 9000 model 237 emulating AAA,
8851 cols#128, it#8, lines#47,
8852 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
8853 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
8854 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
8855 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
8856 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
8857 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8858 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
8859 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8860 gator-52|HP 9000 model 237 emulating VT52,
8861 cols#128, lines#47, use=vt52,
8862 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
8863 lines#94, use=gator-52,
8867 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
8870 # Honeywell Bull terminal. Its cursor and function keys send single
8871 # control characters and it has standout/underline glitch. Most programs
8872 # do not like these features/bugs. Visual bell is realized by flashing the
8873 # "keyboard locked" LED.
8874 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
8876 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
8877 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
8878 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
8879 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
8880 dku7003|Honeywell Bull DKU 7003 all features described,
8883 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
8884 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8887 #### Lear-Siegler (adm)
8889 # These guys are long since out of the terminals business, but
8890 # in 1995 many current terminals still have an adm type as one of their
8891 # emulations (usually their stupidest, and usually labeled adm3, though
8892 # these `adm3' emulations normally have adm3a+ capabilities).
8894 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
8895 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
8896 # was being held to ground would trigger a send of the top line on the screen.
8897 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
8898 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
8899 # for clearing up this point.)
8901 adm1a|adm1|lsi adm1a,
8904 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8905 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
8910 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8911 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8912 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
8913 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
8914 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
8918 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
8919 # The following ADM-3A switch settings are assumed for normal operation:
8920 # SPACE U/L_DISP CLR_SCRN 24_LINE
8921 # CUR_CTL LC_EN AUTO_NL FDX
8922 # Other switches may be set for operator convenience or communication
8923 # requirements. I recommend
8924 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
8926 # Most of these terminals required an option ROM to support lower case display.
8927 # Open the case and look at the motherboard; if you see an open 24-pin DIP
8928 # socket, you may be out of luck.
8930 # (adm3a: some capabilities merged in from BRl entry -- esr)
8934 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
8935 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8936 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
8940 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
8943 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
8944 rmso=\EG, smso=\EG, use=adm3a+,
8945 # A lot of terminals other than adm11s use these. Wherever you see
8946 # use=adm+sgr with some of its capabilities disabled, try the
8947 # disabled ones. They may well work but not have been documented or
8948 # expressed in the using entry. We'd like to cook up an <sgr> but the
8949 # <rmacs>/<smacs> sequences of the using entries vary too much.
8950 adm+sgr|adm style highlight capabilities,
8951 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
8952 smso=\EG4, smul=\EG8,
8953 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
8954 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
8955 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
8956 # be ^Z, according to his entry.
8957 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
8958 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
8961 OTkn#8, cols#80, lines#24,
8962 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
8963 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8964 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
8965 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8966 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8967 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
8969 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
8970 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
8971 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
8972 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
8973 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
8974 # via BRL. That entry asserted <xmc#1>, but I've left that out because
8975 # neither earlier nor later ADMSs have it -- esr)
8977 # You will need to get into the supervisor setup before you can set
8978 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
8979 # see a lot more setup options.
8981 # While in supervisor setup you can also use following codes:
8983 # Ctrl-P Personality character selections (configure for example what
8984 # arrow keys send, if I recall correctly)
8985 # Ctrl-T tabs 1-80 use left&right to move and up to set and
8986 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
8987 # Ctrl-B Binary setup (probably not needed. I think that everything can
8988 # be set using normal setup)
8989 # Ctrl-A Answerback mode (enter answerback message)
8990 # Ctrl-U User friendly mode (normal setup)
8991 # Ctrl-D Defaults entire setup and function keys from EPROM tables
8992 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
8993 # Ctrl-R Reads both setup and functions keys from NVM.
8994 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
8996 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
8997 # RTS/CTS used nowadays with virtually every modem and computer. 19200
8998 # bps works fine with hardware flow control.
9000 # The following null-modem cable should fix this and enable you to use
9001 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
9002 # set ADM-12+ for DTR handshaking from supervisor setup.
9015 OTbs, OTpt, am, mir,
9016 OTug#1, cols#80, it#8, lines#24,
9017 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9018 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9019 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
9020 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
9021 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
9022 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
9023 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9024 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9025 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
9027 # (adm20: removed obsolete ":kn#7:" -- esr)
9028 adm20|lear siegler adm20,
9030 cols#80, it#8, lines#24,
9031 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
9032 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
9033 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
9034 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
9036 adm21|lear siegler adm21,
9038 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
9039 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
9040 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
9041 use=adm+sgr, use=adm3a,
9042 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
9043 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
9044 # removed bogus-looking \200 from before <cup>. -- esr)
9048 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9049 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9050 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
9051 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
9053 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
9054 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9055 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9056 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
9057 # ADM 31 DIP Switches
9059 # This information comes from two versions of the manual for the
9060 # Lear-Siegler ADM 31.
9064 # +-||||-------------------------------------+
9079 # +----------------------------------------------+
9080 # front of case (keyboard)
9082 # S1 - Data Rate - Modem
9083 # S2 - Data Rate - Printer
9084 # ------------------------
9086 # -------------------
9104 # S3 - Interface/Printer/Attributes
9105 # ---------------------------------
9106 # Printer Busy Control
9109 # off off off Busy not active, CD disabled
9110 # off off on Busy not active, CD enabled
9111 # off on off Busy active on J5-20, CD disabled
9112 # on off off Busy active on J5-19, CD disabled - Factory Set.
9113 # on off on Busy active on J5-19, CD enabled
9115 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
9117 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
9119 # sw6 ON enables printer BUSY active LOW - Factory Setting
9120 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
9122 # sw7 ON - steady cursor - Factory Setting
9123 # OFF - blinking cursor
9125 # sw8 ON causes selected attribute character to be displayed
9126 # OFF causes SPACE to be displayed instead - Factory Setting
9132 # sw4 sw1 sw2 sw3 sw4
9133 # ---------------------------
9134 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
9135 # Current Loop disabled - Factory Setting
9136 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
9138 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
9139 # Current Loop Disabled
9141 # sw5 ON disables dot stretching mode - Factory Setting
9142 # OFF enables dot stretching mode
9143 # sw6 ON enables blanking function
9144 # OFF enables underline function - Factory Setting
9145 # sw7 ON causes NULLS to be displayed as NULLS
9146 # OFF causes NULLS to be displayed as SPACES - Factory Setting
9148 # S5 - Word Structure
9149 # -------------------
9150 # sw1 ON enables BREAK key - Factory Setting
9151 # OFF disables BREAK key
9152 # sw2 ON selects 50Hz monitor refresh rate
9153 # OFF selects 60Hz monitor refresh rate - Factory Setting
9155 # Modem Port Selection
9158 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
9159 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
9160 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
9161 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
9162 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
9163 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
9164 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
9165 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
9167 # sw6 ON sends bit 8 a 1 (mark)
9168 # OFF sends bit 8 as 0 (space) - Factory Setting
9169 # sw7 ON selects Block Mode
9170 # OFF selects Conversation Mode - Factory Setting
9171 # sw8 ON selects Full Duplex operation
9172 # OFF selects Half Duplex operation - Factory Setting
9176 # sw1, sw2, sw6, sw7 Reserved - Factory 0
9178 # Printer Port Selection
9179 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
9181 # sw8 ON enables Printer Port
9182 # OFF disables Printer Port - Factory Setting
9184 # S7 - Polling Address
9185 # --------------------
9186 # sw1-7 Establish ASCII character which designates terminal polling address
9188 # OFF = logic 1 - Factory Setting
9189 # sw8 ON enables Polling Option
9190 # OFF disables Polling Option - Factory Setting
9193 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
9195 # This adm31 entry uses underline as the standout mode.
9196 # If the adm31 gives you trouble with standout mode, check the DIP switch in
9197 # position 6, bank @c11, 25% from back end of the circuit board. Should be
9198 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
9199 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
9200 adm31|lsi adm31 with sw6 set for underline mode,
9203 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9204 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9205 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
9206 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9207 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9208 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
9209 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
9210 adm31-old|o31|old adm31,
9211 rmul@, smso=\EG4, smul@, use=adm31,
9212 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
9216 if=/usr/share/tabset/vt100,
9217 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
9218 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
9222 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9223 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9224 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
9225 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
9226 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
9227 smir=\Eq, smul@, use=adm+sgr,
9228 # The following termcap for the Lear Siegler ADM-42 leaves the
9229 # "system line" at the bottom of the screen blank (for those who
9230 # find it distracting otherwise)
9231 adm42-ns|lsi adm-42 with no system line,
9232 cbt=\EI\EF \011, clear=\E;\EF \011,
9233 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
9234 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
9235 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
9236 smir=\Eq\EF \011, use=adm42,
9237 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
9238 # The insert mode of this terminal is commented out because it's broken for our
9239 # purposes in that it will shift the position of every character on the page,
9240 # not just the cursor line!
9241 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
9242 adm1178|1178|lsi adm1178,
9244 cols#80, lines#24, xmc#1,
9245 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
9246 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9247 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
9248 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
9249 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
9250 sgr0=\E), smso=\EG4, smul=\EG1,
9254 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
9255 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
9256 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
9258 # ComputerVision Services
9259 # 500 Old Connecticut Path
9263 # Standout mode is dim reverse-video.
9264 pt100|pt200|wren|fenix|prime pt100/pt200,
9266 cols#80, it#8, lines#24,
9267 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
9268 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
9269 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
9270 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
9271 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
9272 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
9273 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
9274 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
9276 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
9278 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
9279 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
9281 cup=\E[%i%p1%d;%p2%dH, use=pt100,
9283 rmso@, smso@, use=pt100,
9284 pt250w|Prime PT250 in 132-column mode,
9285 rmso@, smso@, use=pt100w,
9290 # 3475-A North 1st Street
9292 # Vox: (800)-457-4447
9293 # Fax: (408)-473-1510
9294 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
9296 # Qume was bought by Wyse, but still (as of early 1995) has its own support
9297 # group and production division.
9299 # Discontinued Qume models:
9301 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
9302 # built to replace them, and a qvt119+ which was a 101+ with available wide
9303 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
9304 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
9305 # ANSI-compatible terminals with the qvt323 and qvt61.
9307 # Current Qume models (as of February 1995):
9309 # All current Qume terminals have ANSI-compatible operation modes.
9310 # Qume is still producing the qvt62, which features emulations for other
9311 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
9312 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
9313 # with many emulations including Wyse370, Wyse 325, etc. Their newest
9314 # model is the qvt520, which is vt420-compatible.
9316 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
9318 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
9319 # setup mode. Shift-s should be a configuration save to NVRAM.
9321 qvt101|qvt108|qume qvt 101 and QVT 108,
9324 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
9325 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
9326 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
9327 # What seems to be going on here is that this entry was designed so that
9328 # the normal highlight is bold and standout is dim plus something else
9329 # (reverse-video maybe? But then, are there two <rev> sequences?)
9331 # Added kdch1, kil1, kdl1 based on screenshot -TD:
9332 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
9333 qvt101+|qvt101p|qume qvt 101 PLUS product,
9335 cols#80, lines#24, xmc#0,
9336 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
9337 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9338 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
9339 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
9340 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
9341 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9342 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
9343 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9344 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
9345 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9346 qvt102|qume qvt 102,
9347 cnorm=\E., use=qvt101,
9348 # (qvt103: added <rmam>/<smam> based on init string -- esr)
9349 qvt103|qume qvt 103,
9351 cols#80, it#8, lines#24, vt#3,
9352 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9353 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
9354 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
9355 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
9356 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
9357 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
9358 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9359 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
9360 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
9361 rmso=\E[m$<2>, rmul=\E[m$<2>,
9362 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9363 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
9365 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
9366 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9367 qvt103-w|qume qvt103 132 cols,
9369 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
9370 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
9372 cols#80, lines#24, xmc#0,
9373 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
9374 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9375 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
9376 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
9377 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
9378 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
9379 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9380 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9381 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
9382 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9383 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
9384 lines#25, use=qvt119+,
9385 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
9387 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
9388 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
9389 lines#25, use=qvt119+,
9390 qvt203|qvt203+|qume qvt 203 Plus,
9391 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
9392 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
9393 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
9394 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
9395 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
9397 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
9399 # Since a command is present for enabling 25 data lines,
9400 # a specific terminfo entry may be generated for the 203.
9401 # If one is desired for the QVT 119 PLUS then 25 lines must
9402 # be selected in the status line (setup line 9).
9404 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
9406 is2=\E[=40h\E[?3l, use=qvt203,
9407 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
9409 rs2=\E[?3h\E[=40h, use=qvt203,
9411 #### Televideo (tvi)
9414 # 550 East Brokaw Road
9415 # PO Box 49048 95161
9417 # Vox: (408)-954-8333
9418 # Fax: (408)-954-0623
9421 # These require incredible amounts of padding.
9423 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
9424 # Televideo terminals are ANSI and PC-ANSI compatible.
9426 tvi803|televideo 803,
9427 clear=\E*$<10>, use=tvi950,
9429 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
9430 # Switch settings are:
9451 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
9467 # U do CR/LF when CR received
9468 # D do CR when CR received
9490 # S2 6 Cursor down key
9494 # S2 7 Screen colour
9498 # S2 8 DSR status (pin 6)
9502 # S2 9 DCD status (pin 8)
9506 # S2 10 DTR status (pin 20)
9509 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
9510 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
9511 tvi910|televideo model 910,
9513 cols#80, it#8, lines#24, xmc#1,
9514 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9515 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
9516 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
9517 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
9518 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
9519 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9520 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9521 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
9522 # From: Alan R. Rogers <rogers%albany@csnet-relay>
9523 # as subsequently hacked over by someone at SCO
9524 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
9526 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
9529 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
9530 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
9531 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
9532 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
9535 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
9536 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
9537 # D U D D 8O1 D U U U 8E2
9539 # S1 9 Autowrap (U = on, D = off)
9540 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
9541 # S2 1 Mode (U = block, D = conversational)
9542 # S2 2 Duplex (U = half, D = full)
9543 # S2 3 Hertz (U = 50, D = 60)
9544 # S2 4 Edit mode (U = local, D = duplex)
9545 # S2 5 Cursor type (U = underline, D = block)
9546 # S2 6 Cursor down key (U = send ^J, D = send ^V)
9547 # S2 7 Screen colour (U = green on black, D = black on green)
9548 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
9549 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
9550 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
9552 tvi910+|televideo 910+,
9553 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
9554 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
9555 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
9556 ll=\E=7\s, use=tvi910,
9558 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
9559 # <khome> from BRL entry -- esr)
9560 tvi912|tvi914|tvi920|old televideo 912/914/920,
9561 OTbs, OTpt, am, msgr,
9562 cols#80, it#8, lines#24, xmc#1,
9563 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9564 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9565 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
9566 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
9567 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
9568 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9569 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9570 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
9572 # We got some new tvi912c terminals that act really weird on the regular
9573 # termcap, so one of our gurus worked this up. Seems that cursor
9574 # addressing is broken.
9575 tvi912cc|tvi912 at cowell college,
9578 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
9579 # From: Benjamin C. W. Sittler
9581 # Someone has put a scanned copy of the manual online at:
9582 # http://vt100.net/televideo/912b-om/
9584 # These terminals were produced ca. 1979, and had a 12" monochrome
9585 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
9586 # ASCII, and were generally similar to adm3a but with attributes
9587 # (including some with magic cookies), fancy half-duplex mode, and
9590 # Some operations require truly incredible amounts of padding. The
9591 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
9592 # are so slow as to be nearly unusable.
9594 # There may or may not have been a separate, earlier series of 912/920
9595 # terminals (without the "B" and "C" suffix); I have never seen one,
9596 # and the manual only describes the "B" and "C" series. The 912 and 920
9597 # are quite distinct from the 914 and 924, which were much nicer non-
9598 # magic-cookie terminals similar to the 950.
9600 # This is a new description for the following TeleVideo terminals,
9601 # distinguished chiefly by their keyboards:
9603 # TVI-912B - very odd layout, no function keys (84 keys)
9604 # TVI-920B - typewriter layout, no function keys (103 keys)
9605 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
9606 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
9608 # To choose a setting for the TERM variable, start with the model:
9610 # Model || base name
9611 # ----------||-----------
9612 # TVI-912B || tvi912b
9613 # TVI-912C || tvi912c
9614 # TVI-920B || tvi920b
9615 # TVI-920C || tvi920c
9617 # Then add a suffix from the following table describing installed options
9618 # and how you'd like to use the terminal:
9620 # Use Video | Second | Visual | Magic | Page || feature
9621 # Attributes | Page | Bell | Cookies | Print || suffix
9622 # ------------|--------|--------|---------|-------||---------
9623 # No | No | N/A | N/A | No || -unk
9624 # No | No | N/A | N/A | Yes || -p
9625 # No | Yes | No | N/A | No || -2p-unk
9626 # No | Yes | No | N/A | Yes || -2p-p
9627 # No | Yes | Yes | N/A | No || -vb-unk
9628 # No | Yes | Yes | N/A | Yes || -vb-p
9629 # Yes | No | N/A | No | N/A ||
9630 # Yes | No | N/A | Yes | N/A || -mc
9631 # Yes | Yes | No | No | N/A || -2p
9632 # Yes | Yes | No | Yes | N/A || -2p-mc
9633 # Yes | Yes | Yes | No | N/A || -vb
9634 # Yes | Yes | Yes | Yes | N/A || -vb-mc
9636 # So e.g. a model 920 C with second page memory option, visual bell
9637 # and no magic cookies would be tvi920c-vb; a model 912 B without the
9638 # second page memory option and using magic cookies would be
9643 # At 9600 baud, the terminal is prone to overflow its input buffer
9644 # during complex operations (insert/delete
9645 # character/line/screen/page), and it does not signal this over the
9646 # RS232 cable. The typical symptom of an overrun is that the terminal
9647 # starts beeping, and output becomes garbled.
9649 # The padding delays in this terminfo were derived using tack(1)
9650 # running on a Linux box connected to a TVI-920C with a later-model
9651 # (A49C1-style) ROM running at 9600 baud, so your mileage may
9652 # vary. The numbers below seem to give the terminal enough time so
9653 # that it doesn't overflow its input buffer and start losing
9658 # If you want to use the FUNCT key on a tvi912[bc], use the
9659 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
9660 # the following table (these also work on the 920 series):
9662 # Unshifted Function Keys:
9664 # Key | capname|| Equivalent
9665 # -----|--------||------------
9666 # F1 | <kf1> || FUNCT + @
9667 # F2 | <kf2> || FUNCT + A
9668 # F3 | <kf3> || FUNCT + B
9669 # F4 | <kf4> || FUNCT + C
9670 # F5 | <kf5> || FUNCT + D
9671 # F6 | <kf6> || FUNCT + E
9672 # F7 | <kf7> || FUNCT + F
9673 # F8 | <kf8> || FUNCT + G
9674 # F9 | <kf9> || FUNCT + H
9675 # F10 | <kf10> || FUNCT + I
9676 # F11 | <kf11> || FUNCT + J
9678 # Shifted Function Keys:
9680 # SHIFT + Key | capname|| Equivalent
9681 # -------------|--------||------------
9682 # SHIFT + F1 | <kf12> || FUNCT + `
9683 # SHIFT + F2 | <kf13> || FUNCT + a
9684 # SHIFT + F3 | <kf14> || FUNCT + b
9685 # SHIFT + F4 | <kf15> || FUNCT + c
9686 # SHIFT + F5 | <kf16> || FUNCT + d
9687 # SHIFT + F6 | <kf17> || FUNCT + e
9688 # SHIFT + F7 | <kf18> || FUNCT + f
9689 # SHIFT + F8 | <kf19> || FUNCT + g
9690 # SHIFT + F9 | <kf20> || FUNCT + h
9691 # SHIFT + F10 | <kf21> || FUNCT + i
9692 # SHIFT + F11 | <kf22> || FUNCT + j
9694 # PORTS AND SWITCH SETTINGS
9696 # Here are the switch settings for the TVI-912B/TVI-920B and
9697 # TVI-912C/TVI-920C:
9699 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
9700 # 2: 9600 3: 4800 4: 2400 5: 1200
9701 # 6: 600 7: 300 8: 150 9: 75
9704 # S2 UART/Terminal options:
9706 # 1: Not used Not allowed
9707 # 2: Alternate character set Standard character set
9708 # 3: Full duplex Half duplex
9709 # 4: 50 Hz refresh 60 Hz refresh
9710 # 5: No parity Send parity
9711 # 6: 2 stop bits 1 stop bit
9712 # 7: 8 data bits 7 data bits
9713 # 8: Not used Not allowed on Rev E or lower
9714 # 9: Even parity Odd parity
9715 # 10: Steady cursor Blinking cursor
9716 # (On Rev E or lower, use W25 instead of switch 10.)
9718 # S5 UART/Terminal options:
9720 # 1: P3-6 Not connected DSR received on P3-6
9721 # 2: P3-8 Not connected DCD received on P3-8
9723 # 3 Open, 4 Open: P3-20 Not connected
9724 # 3 Open, 4 Closed: DTR on when terminal is on
9725 # 3 Closed, 4 Open: DTR is connected to RTS
9726 # 3 Closed, 4 Closed: Not allowed
9728 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
9729 # all data transmitted out of the modem port (P3) will also be
9730 # transmitted out of the printer port (P4).
9732 # 6 Open, 7 Open: Not allowed
9733 # 6 Open, 7 Closed: 20ma current loop input
9734 # 6 Closed, 7 Open: RS232 input
9735 # 6 Closed, 7 Closed: Not allowed
9738 # If the jumper is installed, the effect will occur (the next time the terminal
9741 # S4/W31: Enables automatic LF upon receipt of CR from
9742 # remote or keyboard.
9743 # S4/W32: Enables transmission of EOT at the end of Send. If not
9744 # installed, a carriage return is sent.
9745 # S4/W33: Disables automatic carriage return in column 80.
9746 # S4/W34: Selects Page Print Mode as initial condition. If not
9747 # installed, Extension Mode is selected.
9749 # NON-STANDARD CAPABILITIES
9751 # Sending <u9> or <u7> returns a cursor position report in the format
9752 # YX\r, where Y and X are as in <cup>. This format is described in
9753 # <u8> and <u6>, but it's not clear how one should write an
9754 # appropriate scanf string, since we need to subtract %' ' from the
9755 # character after reading it. The <u9> capability is used by tack(1)
9756 # to synchronize during padding tests, and seems to work for that
9759 # This description also includes the obsolete termcap capabilities
9760 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
9762 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
9764 # The FUNCT modifier actually works with every normal key by sending
9765 # ^AX\r, where X is the sequence normally sent by that key. This is a
9766 # sort of meta key not currently describable in terminfo.
9768 # There are quite a few other keys (especially on the 920 models,) but
9769 # they are for the most part only useful in block mode.
9771 # These terminals have lots of forms manipulation features, mainly
9772 # useful in block mode, including "clear X to nulls" (vs. "clear X to
9773 # spaces"; nulls are sentinels for "send X" operations); "send X"
9774 # operations for uploading all or part of the screen; and block-mode
9775 # editing keys (they don't send escape sequences, but manipulate video
9776 # memory directly). Block mode is used for local editing, and protect
9777 # mode (in conjunction with the "write protect" attribute,
9778 # a.k.a. half-intensity outside of protect mode) is used to control
9779 # which parts of the screen are edited/sent/printed (by <mc0>).
9781 # There are at least two major families of ROM, "early" and
9782 # A49B1/A49C1; the major difference seems to be that the latter ROMs
9783 # support a few extra escape sequences for manipulating the off-screen
9784 # memory page, and for sending whole pages back to the host (mainly
9785 # useful in block mode.) The descriptions in this file don't use any
9786 # of those sequences: set cursor position including page (\E-PYX,
9787 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
9788 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
9789 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
9790 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
9791 # are as in <cup>, and some "send page" features mainly useful for
9792 # forms manipulation.
9794 # The keyboard enable (\E") and disable (\E#) sequences are unused,
9795 # except that a terminal reset (<is2>) enables the keyboard.
9797 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
9798 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
9802 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
9803 # sequences (I infer that in some TeleVideo terminal they may invert
9804 # and uninvert the display) so the <flash> sequence given here is a
9805 # cheesy page-flip instead.
9807 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
9808 # tack(1), so it is not included in the descriptions below.
9810 # It's not clear whether auto_left_margin (<bw>) flag should be set
9811 # for these terminals; tack says yes, so it is set here, but this
9812 # differs from other descriptions I've seen.
9814 # Extension print mode (<mc5>) echoes all characters to the printer
9815 # port [in addition to displaying them] except for the page print mode
9816 # sequence (<mc4>); this is a slight violation of the terminfo
9817 # definition for <mc5> but I don't expect it to cause problems. We
9818 # reset to page print mode in <rs1> since it may have been enabled
9821 # The descriptions with plus signs (+) are building blocks.
9823 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
9825 cols#80, it#8, lines#24,
9826 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9827 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
9828 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
9829 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
9830 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
9831 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
9832 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
9833 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
9834 u7=\E?, u8=%c%c\r, u9=\E?,
9836 # This isn't included in the basic capabilities because it is
9837 # typically unusable in combination with the full range of video
9838 # attributes, since the magic cookie attributes turn into ASCII
9839 # control characters, and the half-intensity ("protected") attribute
9840 # converts all affected characters to spaces.
9842 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
9845 # This uses half-intensity mode (<dim>) for standout (<smso>), and
9846 # exposes no other attributes (half-intensity is the only attribute
9847 # that does not generate a magic cookie.)
9849 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
9851 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
9854 # Full magic-cookie attribute support, with half-intensity reverse
9855 # video for standout. Note that we add a space in the <dim> sequence
9856 # to give a consistent magic-cookie count. Also note that <sgr> uses
9857 # backspacing (in the TVI-supported order) to apply all requested
9858 # attributes with only a single magic cookie.
9860 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
9862 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
9864 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
9865 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
9866 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
9868 # This uses the second page memory option to save & restore screen
9869 # contents. If your terminal is missing the option, this description
9870 # should still work, but that has not been tested.
9872 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
9873 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
9874 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
9876 # This simulates flashing by briefly toggling to the other page
9879 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
9880 bel=\EK$<100>\EK, use=tvi912b+2p,
9882 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
9884 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
9885 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
9886 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
9887 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
9888 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9889 kf8=^AG\r, kf9=^AH\r,
9891 # Combinations of the basic building blocks
9893 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
9894 use=tvi912b+2p, use=tvi912b-unk,
9896 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
9897 use=tvi912b+vb, use=tvi912b-unk,
9899 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
9900 use=tvi912b+printer, use=tvi912b-unk,
9902 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
9903 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
9905 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
9906 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
9908 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
9909 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
9911 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
9912 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
9914 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
9915 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
9917 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
9918 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
9920 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
9921 use=tvi912b+dim, use=tvi912b-unk,
9923 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
9924 use=tvi912b+mc, use=tvi912b-unk,
9926 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
9927 use=tvi920b+fn, use=tvi912b-unk,
9929 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
9930 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
9932 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
9933 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
9935 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
9936 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
9938 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
9939 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
9942 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
9943 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
9946 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
9947 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
9950 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
9951 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
9954 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
9955 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
9958 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
9959 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
9962 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
9963 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
9965 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
9966 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
9968 # Televideo 921 and variants
9969 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
9970 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
9971 # also added empty <acsc> to suppress tic warning -- esr)
9972 tvi921|televideo model 921 with sysline same as page & real vi function,
9973 OTbs, OTpt, am, hs, xenl, xhp,
9974 cols#80, lines#24, xmc#0,
9975 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9976 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9977 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9978 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
9979 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
9980 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
9981 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
9982 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
9983 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
9984 # without the beeper
9985 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
9986 # also added empty <acsc> to suppress tic warning -- esr)
9987 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
9989 cols#80, lines#24, xmc#0,
9990 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9991 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9992 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9993 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
9994 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
9995 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
9996 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9997 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
9998 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
9999 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
10000 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
10001 dl1=\ER$<2*/>, il1=\EE$<2*/>,
10002 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
10003 kil1=\EE$<2*/>, use=tvi92B,
10005 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
10006 # in from a BSD termcap file because it looks like they do something the
10007 # old ones skip -- esr)
10008 tvi924|televideo tvi924,
10009 am, bw, hs, in, mir, msgr, xenl, xon,
10010 cols#80, it#8, lines#24, wsl#80, xmc#0,
10011 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
10012 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
10013 cub1=^H, cud1=^V, cuf1=^L,
10014 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
10015 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
10016 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
10017 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
10018 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
10019 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
10020 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
10021 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
10022 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
10023 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
10024 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
10025 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
10026 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
10029 # TVI925 DIP switches. In each of these, D = Down and U = Up,
10031 # Here are the settings for the external (baud) switches (S1):
10034 # 7 8 9 10 [Printer]
10035 # 1 2 3 4 [Main RS232]
10036 # -----------------------------------------------------
10055 # Settings for word length and stop-bits (S1)
10057 # Position Description
10059 # ---------------------------
10066 # S2 (external) settings
10068 # Position Up Dn Description
10069 # --------------------------------------------
10071 # X Duplex edit (transmit editing keys)
10072 # --------------------------------------------
10073 # 2 X 912/920 emulation
10075 # --------------------------------------------
10079 # --------------------------------------------
10083 # --------------------------------------------
10087 # --------------------------------------------
10091 # --------------------------------------------
10095 # --------------------------------------------
10096 # 6 X White on black display
10097 # X Black on white display
10098 # --------------------------------------------
10101 # --------------------------------------------
10104 # --------------------------------------------
10107 # --------------------------------------------
10110 # --------------------------------------------
10111 # 10 X CR/LF (Auto LF)
10114 # S3 (internal switch) settings:
10116 # Position Up Dn Description
10117 # --------------------------------------------
10120 # --------------------------------------------
10123 # --------------------------------------------
10126 # --------------------------------------------
10129 # --------------------------------------------
10132 # --------------------------------------------
10133 # 4 X Blinking block cursor
10135 # --------------------------------------------
10136 # 4 X Blinking underline cursor
10138 # --------------------------------------------
10139 # 4 X Steady block cursor
10141 # --------------------------------------------
10142 # 4 X Steady underline cursor
10144 # --------------------------------------------
10145 # 6 X Screen blanking timer (ON)
10146 # X Screen blanking timer (OFF)
10147 # --------------------------------------------
10148 # 7 X Page attributes
10149 # X Line attributes
10150 # --------------------------------------------
10151 # 8 X DCD disconnected
10153 # --------------------------------------------
10154 # 9 X DSR disconnected
10156 # --------------------------------------------
10157 # 10 X DTR Disconnected
10159 # --------------------------------------------
10161 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
10162 tvi925|televideo 925,
10163 OTbs, am, bw, hs, ul,
10164 cols#80, lines#24, xmc#1,
10165 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
10166 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10167 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
10168 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
10169 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
10170 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10171 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
10172 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10173 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
10174 tsl=\Eh\Ef, use=adm+sgr,
10175 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
10176 # to avoid "magic cookie" standout glitch:
10177 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
10179 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
10181 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
10182 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
10183 # for additional capabilities,
10184 # The following tvi descriptions from B:pjphar and virus!mike
10185 # is for all 950s. It sets the following attributes:
10186 # full duplex (\EDF) write protect off (\E()
10187 # conversation mode (\EC) graphics mode off (\E%)
10188 # white on black (\Ed) auto page flip off (\Ew)
10189 # turn off status line (\Eg) clear status line (\Ef\r)
10190 # normal video (\E0) monitor mode off (\EX or \Eu)
10191 # edit mode (\Er) load blank char to space (\Ee\040)
10192 # line edit mode (\EO) enable buffer control (^O)
10193 # protect mode off (\E\047) duplex edit keys (\El)
10194 # program unshifted send key to send line all (\E016)
10195 # program shifted send key to send line unprotected (\E004)
10196 # set the following to nulls:
10197 # field delimiter (\Ex0\200\200)
10198 # line delimiter (\Ex1\200\200)
10199 # start-protected field delimiter (\Ex2\200\200)
10200 # end-protected field delimiter (\Ex3\200\200)
10201 # set end of text delimiter to carriage return/null (\Ex4\r\200)
10203 # TVI 950 Switch Setting Reference Charts
10207 # S1 1 2 3 4 5 6 7 8 9 10
10208 # +-----------------------+-----+-----+-----------------------+
10209 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
10210 # | |Bits |Bits | |
10211 # +------+-----------------------+-----+-----+-----------------------+
10212 # | Up | See | 7 | 2 | See |
10213 # +------+-----------------------+-----+-----+-----------------------+
10214 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
10215 # +------+-----------------------+-----+-----+-----------------------+
10218 # S2 1 2 3 4 5 6 7 8 9 10
10219 # +-----+-----+-----------------+-----+-----------+-----+-----+
10220 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
10221 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10222 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
10223 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10224 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
10225 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10229 # +-----------+-----+-----+-----+-----+-----------+
10230 # | Display | 1 | 2 | 3 | 4 | Baud |
10231 # +-----------+-----+-----+-----+-----+ |
10232 # | Printer | 7 | 8 | 9 | 10 | Rate |
10233 # +-----------+-----+-----+-----+-----+-----------+
10234 # | D | D | D | D | 9600 |
10235 # | U | D | D | D | 50 |
10236 # | D | U | D | D | 75 |
10237 # | U | U | D | D | 110 |
10238 # | D | D | U | D | 135 |
10239 # | U | D | U | D | 150 |
10240 # | D | U | U | D | 300 |
10241 # | U | U | U | D | 600 |
10242 # | D | D | D | U | 1200 |
10243 # | U | D | D | U | 1800 |
10244 # | D | U | D | U | 2400 |
10245 # | U | U | D | U | 3600 |
10246 # | D | D | U | U | 4800 |
10247 # | U | D | U | U | 7200 |
10248 # | D | U | U | U | 9600 |
10249 # | U | U | U | U | 19200 |
10250 # +-----+-----+-----+-----+-----------+
10253 # +-----+-----+-----+-----------+
10254 # | 3 | 4 | 5 | Parity |
10255 # +-----+-----+-----+-----------+
10256 # | X | X | D | None |
10257 # | D | D | U | Odd |
10258 # | D | U | U | Even |
10259 # | U | D | U | Mark |
10260 # | U | U | U | Space |
10261 # +-----+-----+-----+-----------+
10265 # +-----+-----+-----------------+
10266 # | 7 | 8 | Communication |
10267 # +-----+-----+-----------------+
10268 # | D | D | Half Duplex |
10269 # | D | U | Full Duplex |
10270 # | U | D | Block |
10271 # | U | U | Local |
10272 # +-----+-----+-----------------+
10274 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
10275 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
10276 # should be present and all tvi native modes use the same string for this.
10277 # Finally, note that BSD has cud1=^V. -- esr)
10278 tvi950|televideo 950,
10279 OTbs, am, hs, mir, msgr, xenl, xon,
10280 cols#80, it#8, lines#24, xmc#1,
10281 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
10282 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10283 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10284 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
10285 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
10287 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10288 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10290 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
10291 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
10292 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10293 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10294 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
10295 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
10298 # is for 950 with two pages adds the following:
10299 # set 48 line page (\E\\2)
10300 # place cursor at page 0, line 24, column 1 (\E-07 )
10301 # set local (no send) edit keys (\Ek)
10303 # two page 950 adds the following:
10304 # when entering ex, set 24 line page (\E\\1)
10305 # when exiting ex, reset 48 line page (\E\\2)
10306 # place cursor at 0,24,1 (\E-07 )
10307 # set duplex (send) edit keys (\El) when entering vi
10308 # set local (no send) edit keys (\Ek) when exiting vi
10310 tvi950-2p|televideo950 w/2 pages,
10311 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10312 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10314 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10315 smkx=\El, use=tvi950,
10317 # is for 950 with four pages adds the following:
10318 # set 96 line page (\E\\3)
10319 # place cursor at page 0, line 24, column 1 (\E-07 )
10321 # four page 950 adds the following:
10322 # when entering ex, set 24 line page (\E\\1)
10323 # when exiting ex, reset 96 line page (\E\\3)
10324 # place cursor at 0,24,1 (\E-07 )
10326 tvi950-4p|televideo950 w/4 pages,
10327 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10328 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10330 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10331 smkx=\El, use=tvi950,
10333 # <is2> for reverse video 950 changes the following:
10334 # set reverse video (\Ed)
10336 # set vb accordingly (\Ed ...delay... \Eb)
10338 tvi950-rv|televideo950 rev video,
10339 flash=\Ed$<200/>\Eb,
10340 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10341 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
10345 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
10346 tvi950-rv-2p|televideo950 rev video w/2 pages,
10347 flash=\Ed$<200/>\Eb,
10348 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10349 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10351 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10352 smkx=\El, use=tvi950,
10354 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
10355 tvi950-rv-4p|televideo950 rev video w/4 pages,
10356 flash=\Ed$<200/>\Eb,
10357 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10358 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10360 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10361 smkx=\El, use=tvi950,
10362 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
10363 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
10364 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
10365 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
10366 # the :ko: string had :cl: in it, which means that one of the original
10367 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
10368 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
10369 # ko implies -- esr)
10370 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
10372 tvi955|televideo 955,
10375 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
10376 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
10377 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
10378 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
10379 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
10380 rmam=\E[=7l, rmxon=^N,
10381 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
10383 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
10385 tvi955-w|955-w|televideo955 w/132 cols,
10387 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
10388 # use half-intensity as normal mode, full intensity as <bold>
10389 tvi955-hb|955-hb|televideo955 half-bright,
10390 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
10391 sgr0=\EG0\E[=5h, use=tvi955,
10392 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
10393 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
10394 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
10395 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
10396 # it does to the function keys. I deduced <rmam>/<smam>.
10397 # also added empty <acsc> to suppress tic warning, -- esr)
10398 tvi970|televideo 970,
10399 OTbs, OTpt, am, da, db, mir, msgr,
10400 cols#80, it#8, lines#24,
10401 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
10402 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
10403 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
10404 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
10405 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
10406 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
10407 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10408 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
10409 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
10410 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
10411 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
10412 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
10413 smul=\E[4m, vpa=\E[%i%p1%dd,
10414 tvi970-vb|televideo 970 with visual bell,
10415 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
10417 tvi970-2p|televideo 970 with using 2 pages of memory,
10418 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
10420 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
10421 # per line (rather than 40), Esc K chooses the normal character set. Not sure
10422 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
10423 # <smul> strings are klutzy, but at least use no screen space.
10424 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
10425 # its absence means <smam>=\Ev isn't safe to use. -- esr)
10426 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
10427 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
10428 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
10429 tvipt|televideo personal terminal,
10432 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
10433 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
10434 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
10435 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
10436 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
10437 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
10438 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
10439 tvi9065|televideo 9065,
10440 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
10441 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
10443 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
10444 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
10445 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
10446 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
10447 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
10448 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
10449 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
10450 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
10451 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
10452 il=\E[%p1%dL, il1=\EE, ind=\n, indn=\E[%p1%dS, invis=\EG1,
10454 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
10455 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
10456 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
10457 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
10458 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10459 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
10460 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
10461 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
10462 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
10463 pfx=\E|%p1%{48}%+%c1%p2%s\031,
10464 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
10465 rep=\E[%p2%db%p1%c, rev=\EG4,
10466 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
10467 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
10468 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
10469 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
10470 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
10471 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
10472 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
10473 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
10474 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
10476 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
10477 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
10479 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
10480 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
10481 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
10485 # In September 1993, Visual Technology of Westboro, Massachusetts,
10486 # merged with White Pine Software of Nashua, New Hampshire.
10488 # White Pine Software may be contacted at +1 603/886-9050.
10489 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
10492 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
10493 # Recently I hacked together the following termcap for Visual
10494 # Technology's Visual 50 terminal. It's a slight modification of
10495 # the vt52 termcap.
10496 # It's intended to run when the Visual 50 is in vt52 emulation mode
10497 # (I know what you're thinking; if it's emulating a vt52, then why
10498 # another termcap? Well, it turns out that the Visual 50 can handle
10499 # <dl1> and db(?) among other things, which the vt52 can't)
10500 # The termcap works OK for the most part. The only problem is on
10501 # character inserts. The whole line gets painfully redrawn for each
10502 # character typed. Any suggestions?
10503 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
10504 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
10505 # disguise; <kf7>-<kf9> are really l1-l3.
10507 OTbs, OTpt, am, da, db, msgr,
10508 cols#80, it#8, lines#24,
10509 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
10510 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10511 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
10512 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
10513 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
10514 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
10515 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
10516 # this one was BSD & SCO's vi50
10517 vi50adm|visual 50 in adm3a mode,
10519 cols#80, it#8, lines#24,
10520 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10521 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
10522 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
10523 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
10524 rmso=\ET, smso=\EU,
10525 # From: Jeff Siegal <jbs@quiotix.com>
10527 OTbs, am, mir, msgr,
10528 cols#80, it#8, lines#24,
10529 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
10530 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10531 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
10532 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
10533 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
10534 smir=\Ea, smso=\EU,
10536 # Visual 200 from BRL
10537 # The following switch settings are assumed for normal operation:
10538 # FULL_DUPLEX SCROLL CR
10539 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
10540 # Other switches may be set for operator convenience or communication
10542 # Character insertion is kludged in order to get around the "beep" misfeature.
10543 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
10544 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
10545 # and <dl1> strings, but we seem to get along fine without them.
10547 OTbs, OTpt, am, mir, msgr,
10548 OTkn#10, cols#80, it#8, lines#24,
10549 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H,
10550 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10551 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
10552 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=\n, invis=\Ea,
10553 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
10554 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
10555 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
10556 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
10557 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
10558 rmacs=\EG, rmkx=\E>, rmso=\E3,
10559 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
10560 smkx=\E=, smso=\E4, tbc=\Eg,
10561 # The older Visuals didn't come with function keys. This entry uses
10562 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
10563 # If your version of vi doesn't support function keys you may want
10565 vi200-f|visual 200 no function keys,
10566 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
10567 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
10568 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
10570 vi200-rv|visual 200 reverse video,
10571 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
10573 # the function keys are programmable but we don't reprogram them to their
10574 # default values with <is2> because programming them is very verbose. maybe
10575 # an initialization file should be made for the 300 and they could be stuck
10577 # (vi300: added <rmam>/<smam> based on init string -- esr)
10578 vi300|visual 300 ansi x3.64,
10581 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
10582 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10583 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10585 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
10586 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10587 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
10588 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
10589 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
10590 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10591 smso=\E[1m, smul=\E[4m,
10592 # some of the vi300s have older firmware that has the command
10593 # sequence for setting editing extent reversed.
10594 vi300-old|visual 300 with old firmware (set edit extent reversed),
10595 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
10597 # Visual 500 prototype entry from University of Wisconsin.
10598 # The best place to look for the escape sequences is page A1-1 of the
10599 # Visual 500 manual. The initialization sequence given here may be
10600 # overkill, but it does leave out some of the initializations which can
10601 # be done with the menus in set-up mode.
10602 # The :xp: line below is so that emacs can understand the padding requirements
10603 # of this slow terminal. :xp: is 10 time the padding factor.
10604 # (vi500: removed unknown :xp#4: termcap;
10605 # also added empty <acsc> to suppress tic warning -- esr)
10608 cols#80, it#8, lines#33,
10609 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
10610 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
10611 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10612 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
10613 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
10615 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
10616 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10617 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
10618 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
10620 # The visual 550 is a visual 300 with tektronix graphics,
10621 # and with 33 lines. clear screen is modified here to
10622 # also clear the graphics.
10623 vi550|visual 550 ansi x3.64,
10625 clear=\030\E[H\E[2J, use=vi300,
10627 vi603|visual603|visual 603,
10629 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10630 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
10631 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10632 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
10633 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
10634 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
10635 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10636 tsl=\EP2~, use=vt100+4bsd,
10641 # 3471 North First Street
10642 # San Jose, CA 95134
10643 # Vox: (408)-473-1200
10644 # Fax: (408) 473-1222
10645 # Web: http://www.wyse.com
10647 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
10648 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
10649 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
10650 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
10653 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
10654 # They now own the Qume and Amdek brands, too. So these are the people to
10655 # talk with about all Link, Qume, and Amdek terminals.
10657 # These entries include a few small fixes.
10658 # I canceled the bel capacities in the vb entries.
10659 # I made two trivial syntax fixes in the wyse30 entry.
10660 # I made some entries relative to adm+sgr.
10663 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
10665 # Although the Wyse 30 can support more than one attribute
10666 # it requires magic cookies to do so. Many applications do not
10667 # function well with magic cookies. The following terminfo uses
10668 # the protect mode to support one attribute (dim) without cookies.
10669 # If more than one attribute is needed then the wy30-mc terminfo
10672 wy30|wyse30|Wyse 30,
10673 am, bw, hs, mc5i, mir, msgr, xon,
10674 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10675 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10676 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
10677 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10678 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
10679 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
10680 fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
10681 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
10682 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
10683 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
10684 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10685 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
10686 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
10687 mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
10688 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
10689 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10690 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10691 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10692 smso=\E`7\E), tbc=\E0, tsl=\EF,
10694 # This terminal description uses the non-hidden attribute mode
10695 # (with magic cookie).
10697 # (wy30-mc: added <smcup> to suppress tic warning --esr)
10698 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
10701 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
10702 rmcup=\EG0, rmso=\EG0,
10703 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10704 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10705 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10706 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10707 smso=\EG4, use=wy30, use=adm+sgr,
10708 # The mandatory pause used by <flash> does not work with
10709 # older versions of terminfo. If you see this effect then
10710 # unset xon and delete the / from the delay.
10711 # i.e. change $<100/> to $<100>
10712 wy30-vb|wyse30-vb|wyse 30 visible bell,
10715 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
10716 # Normal) without magic cookies by using the protect mode.
10717 # The following description uses this feature, but when more
10718 # than one attribute is put on the screen at once, all attributes
10719 # will be changed to be the same as the last attribute given.
10720 # The Wyse 50 can support more attributes when used with magic
10721 # cookies. The wy50-mc terminal description uses magic cookies
10722 # to correctly handle multiple attributes on a screen.
10724 wy50|wyse50|Wyse 50,
10725 am, bw, hs, mc5i, mir, msgr, xon,
10726 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10727 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10728 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
10729 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10730 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
10731 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10732 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
10733 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
10734 kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10735 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10736 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10737 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10738 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10739 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10740 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
10741 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10742 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
10743 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10744 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
10746 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10747 smso=\E`6\E), tbc=\E0, tsl=\EF,
10749 # This terminal description uses the non-hidden attribute mode
10750 # (with magic cookie).
10752 # The mandatory pause used by flash does not work with some
10753 # older versions of terminfo. If you see this effect then
10754 # unset <xon> and delete the / from the delay.
10755 # i.e. change $<100/> to $<100>
10756 # (wy50-mc: added <smcup> to suppress tic warning --esr)
10757 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
10760 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
10761 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
10762 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10763 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10764 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10765 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10766 smso=\EGt, use=wy50, use=adm+sgr,
10767 wy50-vb|wyse50-vb|wyse 50 visible bell,
10769 wy50-w|wyse50-w|wyse 50 132-column,
10770 cols#132, lw#7, nlab#16, wsl#97,
10771 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10773 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
10777 # The Wyse 350 is a Wyse 50 with color.
10778 # Unfortunately this means that it has magic cookies.
10779 # The color attributes are designed to overlap the reverse, dim and
10780 # underline attributes. This is nice for monochrome applications
10781 # because you can make underline stuff green (or any other color)
10782 # but for true color applications it's not so hot because you cannot
10783 # mix color with reverse, dim or underline.
10784 # To further complicate things one of the attributes must be
10785 # black (either the foreground or the background). In reverse video
10786 # the background changes color with black letters. In normal video
10787 # the foreground changes colors on a black background.
10788 # This terminfo uses some of the more advanced features of curses
10789 # to display both color and blink. In the final analysis I am not
10790 # sure that the wy350 runs better with this terminfo than it does
10791 # with the wy50 terminfo (with user adjusted colors).
10793 # The mandatory pause used by flash does not work with
10794 # older versions of terminfo. If you see this effect then
10795 # unset xon and delete the / from the delay.
10796 # i.e. change $<100/> to $<100>
10798 # Bug: The <op> capability resets attributes.
10799 wy350|wyse350|Wyse 350,
10800 am, bw, hs, mc5i, mir, xon,
10801 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
10803 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
10804 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
10805 cub1=^H, cud1=\n, cuf1=^L,
10806 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
10807 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
10808 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
10809 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
10810 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
10811 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10812 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10813 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10814 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10815 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10816 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10817 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
10818 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10819 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
10820 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
10821 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
10822 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
10823 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
10825 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
10826 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
10827 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
10829 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
10830 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
10831 wy350-vb|wyse350-vb|wyse 350 visible bell,
10833 wy350-w|wyse350-w|wyse 350 132-column,
10834 cols#132, lw#7, nlab#16, wsl#97,
10835 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10837 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
10840 # This terminfo description is untested.
10841 # The wyse100 emulates an adm31, so the adm31 entry should work.
10845 cols#80, lines#24, xmc#1,
10846 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10847 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10848 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
10849 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
10850 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
10851 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
10852 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
10854 # The Wyse 120/150 has most of the features of the Wyse 60.
10855 # This terminal does not need padding up to 9600 baud!
10856 # <msgr> should be set but the clear screen fails when in
10857 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10860 wy120|wyse120|wy150|wyse150|Wyse 120/150,
10861 am, bw, hs, km, mc5i, mir, msgr, xon,
10862 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10863 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10864 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10865 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10866 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10867 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10868 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
10869 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10870 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10872 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10873 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10874 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10875 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10876 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10877 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10878 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10879 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10880 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10881 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10882 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10883 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
10884 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10885 rs3=\EwG\Ee($<100>,
10886 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10887 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10888 %{64}%|%;%?%p7%t%{1}%|%;%c,
10889 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10890 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10891 tbc=\E0, tsl=\EF, use=adm+sgr,
10893 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
10894 cols#132, lw#7, nlab#16, wsl#97,
10895 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10896 rs2=\E`;$<70>, use=wy120,
10898 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
10899 lh@, lines#25, lw@, nlab@,
10900 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
10902 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
10903 lh@, lines#25, lw@, nlab@,
10904 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
10906 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
10909 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
10912 # The Wyse 60 is like the Wyse 50 but with more padding.
10913 # The reset strings are slow and the pad times very depending
10914 # on other parameters such as font loading. I have tried
10915 # to follow the following outline:
10917 # <rs1> -> set personality
10918 # <rs2> -> set number of columns
10919 # <rs3> -> set number of lines
10920 # <is1> -> select the proper font
10921 # <is2> -> do the initialization
10922 # <is3> -> set up display memory (2 pages)
10924 # The Wyse 60's that have vt100 emulation are slower than the
10925 # older Wyse 60's. This change happened mid-1987.
10926 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
10928 # The meta key is only half right. This terminal will return the
10929 # high order bit set when you hit CTRL-function_key
10931 # It may be useful to assign two function keys with the
10932 # values \E=(\s look at old data in page 1
10933 # \E=W, look at bottom of page 1
10934 # where \s is a space ( ).
10937 # The Wyse 60 runs faster when the XON/XOFF
10938 # handshake is turned off.
10940 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
10941 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10942 wy60|wyse60|Wyse 60,
10943 am, bw, hs, km, mc5i, mir, msgr,
10944 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
10945 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10946 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
10947 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10948 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10949 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
10950 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10951 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
10952 ip=$<3>, is1=\EcB0\EcC1,
10953 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10955 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10956 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10957 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10958 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10959 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10960 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10961 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10962 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10963 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10964 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10965 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
10966 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
10967 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
10968 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
10969 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10970 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10971 %{64}%|%;%?%p7%t%{1}%|%;%c,
10972 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10973 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10974 tbc=\E0, tsl=\EF, use=adm+sgr,
10976 wy60-w|wyse60-w|wyse 60 132-column,
10977 cols#132, lw#7, nlab#16, wsl#97,
10978 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
10979 rs2=\EeF$<150>\E`;$<150>, use=wy60,
10981 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
10982 lh@, lines#25, lw@, nlab@,
10983 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
10984 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
10985 lh@, lines#25, lw@, nlab@,
10986 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
10988 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
10990 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
10991 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
10992 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
10993 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
10994 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
10995 cols#132, lw#7, nlab#16, wsl#97,
10996 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10997 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
10998 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
11000 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
11001 lh@, lines#43, lw@, nlab@,
11002 pln@, rs3=\Ee+$<150>, use=wy60-42,
11003 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
11004 lh@, lines#43, lw@, nlab@,
11005 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
11007 wy60-vb|wyse60-vb|Wyse 60 visible bell,
11009 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
11012 # The Wyse-99GT looks at lot like the Wyse 60 except that it
11013 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
11014 # setup parameter controls the number of lines on the screen.
11015 # For the Wyse 99GT the "lines" setup parameter controls the
11016 # number of lines in a page. The screen can display 25 lines max.
11017 # The Wyse-99GT also has personalities for the VT220 and
11018 # Tektronix 4014. But this has no bearing on the native mode.
11020 # (msgr) should be set but the clear screen fails when in
11021 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
11022 # then set msgr, else use msgr@.
11024 # u0 -> enter Tektronix mode
11025 # u1 -> exit Tektronix mode
11027 wy99gt|wyse99gt|Wyse 99gt,
11029 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
11030 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
11031 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
11032 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
11033 u0=\E~>\E8, u1=\E[42h, use=wy60,
11035 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
11036 cols#132, lw#7, nlab#16, wsl#97,
11037 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
11038 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
11041 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
11042 lh@, lines#25, lw@, nlab@,
11043 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
11045 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
11046 lh@, lines#25, lw@, nlab@,
11047 pln@, rs2=\E`;$<150>, use=wy99gt-w,
11049 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
11052 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
11053 bel@, use=wy99gt-w,
11055 # Can't set tabs! Other bugs (ANSI mode only):
11056 # - can't redefine function keys (anyway, key redefinition in ANSI mode
11057 # is too much complex to be described);
11058 # - meta key can't be described (the terminal forgets it when reset);
11059 # The xon-xoff handshaking can't be disabled while in ansi personality, so
11060 # emacs can't work at speed greater than 9600 baud. No padding is needed at
11062 # dch1 has been commented out because it causes annoying glittering when
11063 # vi deletes one character at the beginning of a line with tabs in it.
11064 # dch makes sysgen(1M) have a horrible behaviour when deleting
11065 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
11066 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
11067 # not, so smir and rmir are commented out as well.
11068 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11069 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
11070 am, km, mc5i, mir, msgr, xenl,
11071 cols#80, it#8, lines#25, vt#3,
11072 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
11073 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11074 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
11075 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
11076 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
11077 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
11078 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
11079 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
11080 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
11081 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
11082 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
11083 il1=\E[L, ind=\n$<1>, invis=\E[8m,
11084 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
11085 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
11086 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11087 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
11088 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
11089 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
11090 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
11091 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
11092 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
11093 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
11094 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
11095 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
11096 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
11099 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
11100 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
11101 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
11102 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
11104 # This is the american terminal. Here tabs work fine.
11105 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11106 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
11107 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
11109 # This terminal (firmware version 02) has a lot of bugs:
11110 # - can't set tabs;
11111 # - other bugs in ANSI modes (see above).
11112 # This description disables handshaking when using cup. This is because
11113 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
11114 # cannot be used at speeds greater than 9600 baud, because at greater
11115 # speeds handshaking is needed even for character sending. If you use
11116 # DTR handshaking, you can use even greater speeds.
11117 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11118 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
11119 am, bw, hs, km, mc5i, mir, msgr, xon,
11120 cols#80, it#8, lines#25, wsl#46,
11121 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
11122 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
11123 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
11124 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11125 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
11126 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
11127 flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
11128 ind=\n, invis=\EG3,
11129 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
11130 \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
11132 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
11133 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
11134 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
11135 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
11136 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
11137 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
11138 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
11139 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
11140 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
11141 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
11142 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
11143 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
11144 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
11145 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
11147 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
11148 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
11150 # This is the american terminal. Here tabs work.
11151 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11152 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
11153 hts=\E1, tbc=\E0, use=wy99f,
11156 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
11157 # The reset strings are slow and the pad times very depending
11158 # on other parameters such as font loading. I have tried
11159 # to follow the following outline:
11161 # <rs1> -> set personality
11162 # <rs2> -> set number of columns
11163 # <rs3> -> set number of lines
11164 # <is1> -> select the proper font
11165 # <is2> -> do the initialization
11166 # <is3> -> set up display memory (2 pages)
11168 # The display memory may be used for either text or graphics.
11169 # When "Display Memory = Shared" the terminal will have more pages
11170 # but garbage may be left on the screen when you switch from
11171 # graphics to text. If "Display Memory = Unshared" then the
11172 # text area will be only one page long.
11174 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
11175 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
11176 wy160|wyse160|Wyse 160,
11177 am, bw, hs, km, mc5i, mir, msgr,
11178 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
11179 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11180 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
11181 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11182 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
11183 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
11184 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
11185 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
11186 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11188 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11189 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11190 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11191 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11192 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11193 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11194 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
11195 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
11196 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11197 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11198 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
11199 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
11200 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
11201 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
11202 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11203 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11204 %{64}%|%;%?%p7%t%{1}%|%;%c,
11205 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11206 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11207 tbc=\E0, tsl=\EF, use=adm+sgr,
11209 wy160-w|wyse160-w|wyse 160 132-column,
11210 cols#132, lw#7, nlab#16, wsl#90,
11211 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
11212 rs2=\EeF$<150>\E`;$<150>, use=wy160,
11214 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
11215 lh@, lines#25, lw@, nlab@,
11216 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
11217 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
11218 lh@, lines#25, lw@, nlab@,
11219 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
11221 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
11223 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
11224 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
11225 rs3=\Ee*$<150>, use=wy160,
11226 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
11227 cols#132, lw#7, nlab#16, wsl#90,
11228 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
11229 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
11231 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
11232 lh@, lines#43, lw@, nlab@,
11233 pln@, rs3=\Ee+$<150>, use=wy160-42,
11234 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
11235 lh@, lines#43, lw@, nlab@,
11236 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
11238 wy160-vb|wyse160-vb|Wyse 160 visible bell,
11240 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
11243 # The Wyse 75 is a vt100 lookalike without advanced video.
11245 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
11246 # Underline) without magic cookies. The following description
11247 # uses this capability, but when more than one attribute is
11248 # put on the screen at once, all attributes will be changed
11249 # to be the same as the last attribute given.
11250 # The Wyse 75 can support more attributes when used with magic
11251 # cookies. The wy75-mc terminal description uses magic cookies
11252 # to correctly handle multiple attributes on a screen.
11254 wy75|wyse75|wyse 75,
11255 am, hs, mc5i, mir, msgr, xenl, xon,
11256 cols#80, lines#24, ma#1, pb#1201, wsl#78,
11257 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11258 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
11259 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>,
11260 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
11261 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11262 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
11263 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
11264 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
11265 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
11266 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
11267 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11268 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11269 ind=\n$<2>, ip=$<1>,
11270 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
11271 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
11272 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
11273 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11274 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11275 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
11276 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
11277 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11278 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
11279 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
11280 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
11281 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
11282 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
11284 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
11285 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
11287 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11288 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
11289 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
11291 # This terminal description uses the non-hidden attribute mode
11292 # (with magic cookie).
11294 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
11297 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
11298 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
11299 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
11300 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
11302 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
11304 wy75-vb|wyse75-vb|wyse 75 with visible bell,
11307 wy75-w|wyse75-w|wyse 75 in 132 column mode,
11309 rs2=\E[35h\E[?3h$<80>, use=wy75,
11310 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
11314 # Wyse 85 emulating a vt220 7 bit mode.
11315 # 24 line screen with status line.
11317 # The vt220 mode permits more function keys but it wipes out
11318 # the escape key. I strongly recommend that <f11> be set to
11320 # The terminal may have to be set for 8 data bits and 2 stop
11321 # bits for the arrow keys to work.
11322 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
11323 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
11324 # <dch> leave trash on the screen when used without XON/XOFF.
11326 wy85|wyse85|wyse 85,
11327 am, hs, mc5i, mir, msgr, xenl, xon,
11328 cols#80, it#8, lines#24, wsl#80,
11329 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11330 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11331 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11332 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11333 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11334 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11335 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11336 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11337 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11338 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11339 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11340 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11341 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11342 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11343 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
11344 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
11345 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
11346 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
11347 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
11348 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
11349 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
11350 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11351 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11352 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11353 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11354 rs3=\E[?5l, sc=\E7,
11355 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11356 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11357 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11358 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11359 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
11361 # Wyse 85 with visual bell.
11362 wy85-vb|wyse85-vb|wyse 85 with visible bell,
11363 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
11365 # Wyse 85 in 132-column mode.
11366 wy85-w|wyse85-w|wyse 85 in 132-column mode,
11368 rs2=\E[35h$<70/>\E[?3h, use=wy85,
11370 # Wyse 85 in 132-column mode with visual bell.
11371 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
11374 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
11375 # This copes with an apparent firmware bug in the wy85. He writes:
11376 # "What I did was change leave the terminal cursor keys set to Normal
11377 # (instead of application), and change \E[ to \233 for all the keys in
11378 # terminfo. At one point, I found some reference indicating that this
11379 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
11380 # me), but I can't find that and the server under my bookmark to "Wyse
11381 # Technical" isn't responding. So there's the question of whether the wy85
11382 # terminfo should reflect the manufacturer's intended behaviour of the terminal
11384 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
11385 am, hs, mc5i, mir, msgr, xenl, xon,
11386 cols#80, it#8, lines#24, wsl#80,
11387 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11388 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11389 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11390 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11391 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11392 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11393 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11394 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11395 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11396 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11397 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11398 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11399 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11400 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11401 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
11402 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
11403 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
11404 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
11405 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
11406 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
11407 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
11408 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
11409 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
11410 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11411 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11412 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11413 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11414 rs3=\E[?5l, sc=\E7,
11415 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11416 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
11417 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11418 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11419 tsl=\E[40h\E7\E[25;%i%p1%dH,
11421 # Wyse 185 emulating a vt320 7 bit mode.
11423 # This terminal always displays 25 lines. These lines may be used
11424 # as 24 data lines and a terminal status line (top or bottom) or
11425 # 25 data lines. The 48 and 50 line modes change the page size
11426 # and not the number of lines on the screen.
11428 # The Compose Character key can be used as a meta key if changed
11431 wy185|wyse185|wyse 185,
11432 am, hs, km, mc5i, mir, msgr, xenl, xon,
11433 cols#80, it#8, lines#24, wsl#80,
11434 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11435 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11436 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11437 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11438 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11439 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11440 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
11441 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11442 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
11443 el=\E[K, el1=\E[1K, enacs=\E)0,
11444 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
11445 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
11446 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
11447 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11448 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
11449 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11450 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
11451 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11452 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
11453 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
11454 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11455 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
11456 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
11457 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
11458 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
11459 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11460 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11461 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11462 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11463 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11464 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11465 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11466 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
11469 # Wyse 185 with 24 data lines and top status (terminal status)
11470 wy185-24|wyse185-24|wyse 185 with 24 data lines,
11472 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11475 # Wyse 185 with visual bell.
11476 wy185-vb|wyse185-vb|wyse 185+flash,
11479 # Wyse 185 in 132-column mode.
11480 wy185-w|wyse185-w|wyse 185 in 132-column mode,
11482 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11483 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
11485 # Wyse 185 in 132-column mode with visual bell.
11486 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
11489 # wy325 terminfo entries
11490 # Done by Joe H. Davis 3-9-92
11492 # lines 25 columns 80
11494 wy325|wyse325|Wyse epc,
11495 am, bw, hs, mc5i, mir,
11496 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11497 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11498 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11499 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11500 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11501 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11502 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11503 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11504 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
11506 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11507 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11508 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11509 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11510 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11511 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
11512 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11513 mc0=\EP, mc4=^T, mc5=\Ed#,
11514 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11515 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11516 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11517 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
11518 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11519 rs3=\EwG\Ee($<100>,
11520 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11521 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11522 %{64}%|%;%?%p7%t%{1}%|%;%c,
11523 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11524 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
11525 tsl=\EF, use=adm+sgr,
11528 # lines 24 columns 80 vb
11530 wy325-vb|wyse325-vb|wyse-325 with visual bell,
11534 # lines 24 columns 132
11536 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
11537 cols#132, lw#7, nlab#16, wsl#97,
11538 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11539 rs2=\E`;$<70>, use=wy325,
11541 # lines 25 columns 80
11543 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
11544 lh@, lines#25, lw@, nlab@,
11545 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11547 # lines 25 columns 132
11549 wy325-25w|wyse325-25w|wy325 132 columns,
11550 lh@, lines#25, lw@, nlab@,
11551 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11553 # lines 25 columns 132 vb
11555 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
11559 # lines 42 columns 80
11561 wy325-42|wyse325-42|wyse-325 42 lines,
11562 lh@, lines#42, lw@, nlab@,
11563 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11565 # lines 42 columns 132
11567 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
11568 lh@, lines#42, lw@, nlab@,
11569 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11571 # lines 42 columns 132 vb
11573 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
11576 # lines 43 columns 80
11578 wy325-43|wyse325-43|wyse-325 43 lines,
11579 lh@, lines#43, lw@, nlab@,
11582 # lines 43 columns 132
11584 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
11585 lh@, lines#43, lw@, nlab@,
11586 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11588 # lines 43 columns 132 vb
11590 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
11593 # Wyse 370 -- 24 line screen with status line.
11595 # The terminal may have to be set for 8 data bits and 2 stop
11596 # bits for the arrow keys to work.
11598 # If you change keyboards the terminal will send different
11599 # escape sequences.
11600 # The following definition is for the basic terminal without
11603 # <u0> -> enter Tektronix 4010/4014 mode
11604 # <u1> -> exit Tektronix 4010/4014 mode
11605 # <u2> -> enter ASCII mode (from any ANSI mode)
11606 # <u3> -> exit ASCII mode (goto native ANSI mode)
11607 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
11608 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
11610 # Bug: The <op> capability resets attributes.
11611 wy370-nk|wyse 370 without function keys,
11612 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
11613 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
11614 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11615 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11616 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11617 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11618 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11619 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11620 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
11621 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11622 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
11623 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
11624 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
11625 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
11626 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11628 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
11629 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
11630 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
11631 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
11633 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
11634 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
11635 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
11637 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
11638 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
11639 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
11640 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
11641 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11642 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
11643 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
11644 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11645 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11646 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11647 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11648 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
11649 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
11650 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
11652 # Function key set for the ASCII (wy-50 compatible) keyboard
11653 # This is the default 370.
11655 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
11656 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11657 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
11658 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11659 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
11660 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
11661 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
11662 knp=\E[U, kpp=\E[V, use=wy370-nk,
11664 # Function key set for the VT-320 (and wy85) compatible keyboard
11666 wy370-105k|Wyse 370 with 105 key keyboard,
11667 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11668 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11669 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11670 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
11671 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11672 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
11673 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
11674 use=wy370-nk, use=vt220+keypad,
11676 # Function key set for the PC compatible keyboard
11678 wy370-EPC|Wyse 370 with 102 key keyboard,
11679 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11680 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
11681 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11682 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11683 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
11685 # Wyse 370 with visual bell.
11686 wy370-vb|Wyse 370 with visible bell,
11689 # Wyse 370 in 132-column mode.
11690 wy370-w|Wyse 370 in 132-column mode,
11692 rs2=\E[35h\E[?3h$<70>, use=wy370,
11694 # Wyse 370 in 132-column mode with visual bell.
11695 wy370-wvb|Wyse 370 with visible bell 132-columns,
11696 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
11697 wy370-rv|Wyse 370 reverse video,
11698 rs3=\E[32h\E[?5h, use=wy370,
11700 # Wyse 99gt Tektronix 4010/4014 emulator,
11702 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
11705 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11706 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11707 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11708 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11709 %{31}%&%{64}%+%c\037,
11711 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11714 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11716 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
11718 # Wyse 160 Tektronix 4010/4014 emulator,
11720 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
11721 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11722 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11723 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11724 %{31}%&%{64}%+%c\037,
11725 home=^]8`g @\037, use=wy99gt-tek,
11727 # Wyse 370 Tektronix 4010/4014 emulator,
11729 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
11732 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11733 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
11734 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
11735 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
11737 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11740 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11742 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
11743 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
11745 # Vendor-supplied Wyse entries end here.
11748 #TITLE: TERMINFO ENTRY WY520
11750 # The WY520 terminfo is based on the WY285 entry published on the WYSE
11751 # BBS with the addition of more function keys and special keys.
11753 # rs1 -> set personality
11754 # rs2 -> set number of columns
11755 # rs3 -> set number of lines
11756 # is1 -> select the proper font
11757 # is2 -> do the initialization
11758 # is3 -> If this string is empty then rs3 gets sent.
11760 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
11761 # - The BS key is programmed to generate BS in smcup since
11762 # is2 doesn't seem to work.
11763 # - Remove and shift/Remove: delete a character
11764 # - Insert : enter insert mode
11765 # - Find : delete to end of file
11766 # - Select : clear a line
11767 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
11769 # - Bottom status line (host writable line) is used.
11770 # - smkx,rmkx are removed because this would put the numeric
11771 # keypad in Dec application mode which doesn't seem to work
11772 # with SCO applications.
11774 wy520|wyse520|wyse 520,
11775 am, hs, km, mc5i, mir, xenl, xon,
11776 cols#80, it#8, lines#24, wsl#80,
11777 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11778 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11779 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11780 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11781 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11782 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11783 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
11784 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
11785 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
11786 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
11787 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
11788 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11789 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
11790 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11791 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
11792 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
11793 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
11794 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
11795 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
11796 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
11797 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
11798 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11799 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
11800 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
11801 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11802 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11803 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11804 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11805 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
11806 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11807 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
11808 vpa=\E[%i%p1%dd, use=vt220+keypad,
11810 # Wyse 520 with 24 data lines and status (terminal status)
11811 wy520-24|wyse520-24|wyse 520 with 24 data lines,
11813 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11816 # Wyse 520 with visual bell.
11817 wy520-vb|wyse520-vb|wyse 520 with visible bell,
11818 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
11820 # Wyse 520 in 132-column mode.
11821 wy520-w|wyse520-w|wyse 520 in 132-column mode,
11823 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11824 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
11826 # Wyse 520 in 132-column mode with visual bell.
11827 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
11828 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
11831 # Wyse 520 emulating a vt420 7 bit mode.
11832 # The DEL key is programmed to generate BS in is2.
11833 # With EPC keyboard.
11834 # - 'End' key will clear till end of line on EPC keyboard
11835 # - Shift/End : ignored.
11836 # - Insert : enter insert mode.
11837 # - Delete : delete a character (have to change interrupt character
11838 # to CTRL-C: stty intr '^c') for it to work since the
11839 # Delete key sends 7FH.
11840 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
11841 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
11842 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
11845 # Wyse 520 with 24 data lines and status (terminal status)
11846 # with EPC keyboard.
11847 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
11849 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11852 # Wyse 520 with visual bell.
11853 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
11854 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
11856 # Wyse 520 in 132-column mode.
11857 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
11859 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11860 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
11862 # Wyse 520 in 132-column mode with visual bell.
11863 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
11864 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
11866 # Wyse 520 in 80-column, 36 lines
11867 wy520-36|wyse520-36|wyse 520 with 36 data lines,
11870 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11873 # Wyse 520 in 80-column, 48 lines
11874 wy520-48|wyse520-48|wyse 520 with 48 data lines,
11877 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11880 # Wyse 520 in 132-column, 36 lines
11881 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
11884 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11887 # Wyse 520 in 132-column, 48 lines
11888 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
11891 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11895 # Wyse 520 in 80-column, 36 lines with EPC keyboard
11896 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
11899 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11902 # Wyse 520 in 80-column, 48 lines with EPC keyboard
11903 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
11906 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11909 # Wyse 520 in 132-column, 36 lines with EPC keyboard
11910 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
11913 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11916 # Wyse 520 in 132-column, 48 lines with EPC keyboard
11917 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
11920 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11923 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
11924 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
11925 # file and we don't know what <hts> is -- esr)
11926 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
11928 cols#80, it#8, lines#24,
11929 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
11930 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
11931 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
11932 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
11933 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
11934 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
11937 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
11938 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
11939 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11940 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
11943 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
11944 wy100q|Wyse 100 for Quotron,
11946 cols#80, lines#24, xmc#1,
11947 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
11948 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11949 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
11950 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
11951 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
11953 #### Kermit terminal emulations
11955 # Obsolete Kermit versions may be listed in the section describing obsolete
11956 # non-ANSI terminal emulators later in the file.
11959 # KERMIT standard all versions.
11960 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11961 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11962 # From: greg small <gts@populi.berkeley.edu> 9-25-84
11963 kermit|standard kermit,
11966 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11967 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11968 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
11969 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
11970 kermit-am|standard kermit plus auto-margin,
11972 is2=K1 Standard Kermit plus Automatic Margins\n,
11974 # IBMPC Kermit 1.2.
11975 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
11976 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
11978 # From: greg small <gts@populi.berkeley.edu> 8-30-84
11979 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
11982 clear=\EH\EJ, ed@, el@,
11983 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
11984 # IBMPC Kermit 1.20
11985 # Cannot use line 25, now acts funny like ansi special scrolling region.
11986 # Initialization must escape from that region by cursor position to line 24.
11987 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
11988 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
11989 # From: greg small <gts@populi.berkeley.edu> 12-19-84
11990 pckermit120|UCB IBMPC Kermit 1.20,
11992 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
11994 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
11996 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
11997 # MS-DOS Kermit 2.27 for the IBMPC
11998 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11999 # Cannot use line 25, now acts funny like ansi special scrolling region.
12000 # Initialization must escape from that region by cursor position to line 24.
12001 # Does not use am: because autowrap is lost when kermit dropped and restarted.
12002 # Reverse video for standout like H19.
12003 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
12004 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12005 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
12007 cols#80, it#8, lines#24,
12008 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
12009 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
12010 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
12011 home=\EH, ht=^I, il1=\EL,
12012 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
12013 \sIBMPC\s3-17-85\n,
12014 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
12015 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
12016 # MS-DOS Kermit 2.27 with automatic margins
12017 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12018 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
12020 cvvis=\EO\Eq\EG\EvK5,
12021 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
12022 \smargins\s3-17-85\n,
12024 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
12025 # Automatic margins now default. Use ansi <sgr> for highlights.
12026 # Define function keys.
12027 # (msk22714: removed obsolete ":kn#10:" -- esr)
12028 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12029 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
12031 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
12032 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
12033 \sIBM\sPC\s3-17-85\n,
12034 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
12035 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12036 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
12037 # This was designed for a VT320 emulator, but it is probably a good start
12038 # at support for the VT320 itself.
12039 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
12040 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
12041 vt320-k3|MS-Kermit 3.00's vt320 emulation,
12042 am, eslok, hs, km, mir, msgr, xenl,
12043 cols#80, it#8, lines#49, pb#9600, vt#3,
12044 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12045 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12046 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r,
12047 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12048 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12049 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12050 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12051 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
12052 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
12054 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12055 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12056 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
12057 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
12058 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12059 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
12060 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
12061 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
12062 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12063 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
12064 \E[4i\E[?4i\E[m\E[r\E[2$~,
12065 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
12066 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12067 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
12068 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
12069 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
12070 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
12071 vt320-k311|dec vt320 series as defined by kermit 3.11,
12072 am, eslok, hs, mir, msgr, xenl, xon,
12073 cols#80, it#8, lines#24, vt#3,
12074 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12075 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12076 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r,
12077 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12078 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12079 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12080 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12081 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
12082 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
12083 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
12085 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
12086 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12087 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12088 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
12089 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
12090 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
12091 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
12092 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
12093 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
12094 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
12096 ######## NON-ANSI TERMINAL EMULATIONS
12101 # These entries attempt to describe Avatar, a terminal emulation used with
12102 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
12103 # capabilities, but with cheaper (shorter) control sequences. Messy design,
12104 # excessively dependent on PC idiosyncrasies, but apparently rather popular
12105 # in the BBS world.
12107 # No color support. Avatar doesn't fit either of the Tektronix or HP color
12108 # models that terminfo knows about. An Avatar color attribute is the
12109 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
12111 # I wrote these entries while looking at the Avatar spec. I don't have
12112 # the facilities to test them. Let me know if they work, or don't.
12114 # Avatar escapes not used by these entries (because maybe you're smarter
12115 # and more motivated than I am and can figure out how to wrap terminfo
12116 # around some of them, and because they are weird enough to be funny):
12118 # ^L -- clear window/reset current attribute to default
12119 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
12121 # bit: 6 5 4 3 2 1 0
12123 # +---+---+ | +---+---+
12125 # | | foreground color
12126 # | foreground intensity
12129 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
12130 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
12131 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
12132 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
12133 # (^V^L and ^V^M set the current attribute as a side-effect.)
12134 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
12135 # in the pattern, <c> the number of times the pattern
12136 # should be repeated. If either value is 0, no-op.
12137 # The pattern can contain Avatar console codes,
12138 # including other ^V ^Y patterns.
12140 # ^V^O -- clockwise mode on; turn print direction right each time you
12141 # hit a window edge (yes, really). Turned off by CR
12143 # ^V^Q%c -- query the driver
12144 # ^V^R -- driver reset
12145 # ^V^S -- Sound tone (PC-specific)
12146 # ^V^T -- change highlight at current cursor position to %c
12147 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
12148 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
12151 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12152 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
12153 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
12154 # which is the only method that will actually work for multiple highlights.)
12156 # Update by TD - 2004: half of this was inconsistent. Found documentation
12157 # and repaired most of the damage. sgr0 is probably incorrect, but the
12158 # available documentation gives no clues for a workable string.
12159 avatar0|avatar terminal emulator level 0,
12161 cols#80, it#8, lines#25,
12162 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
12163 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
12164 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
12166 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
12167 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
12168 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
12169 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
12171 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12172 avatar0+|avatar terminal emulator level 0+,
12173 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
12174 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12175 avatar|avatar1|avatar terminal emulator level 1,
12176 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
12177 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
12181 # RBComm is a lean and mean terminal emulator written by the Interrupt List
12182 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
12183 # '90s), especially in the BBS world, and still has some loyal users due to
12184 # its very small memory footprint and to a cute macro language.
12185 rbcomm|IBM PC with RBcomm and EMACS keybindings,
12186 am, bw, mir, msgr, xenl,
12187 cols#80, it#8, lines#25,
12188 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12189 clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12190 cub1=^H, cud1=^C, cuf1=^B,
12191 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
12192 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
12193 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
12194 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
12195 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
12196 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
12197 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
12198 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
12199 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
12200 rbcomm-nam|IBM PC with RBcomm without autowrap,
12202 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12203 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
12204 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12205 rbcomm-w|IBM PC with RBcomm in 132 column mode,
12207 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12208 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
12209 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12211 ######## LCD DISPLAYS
12214 #### Matrix Orbital
12215 # from: Eric Z. Ayers (eric@ale.org)
12217 # Matrix Orbital 20x4 LCD display
12218 # Command Character is 0xFE (decimal 254, octal 376)
12220 # On this device, cursor addressability isn't possible. The LCD expects:
12221 # 0xfe G <col> <row>
12222 # for cup: %p1 == row and %p2 is column
12225 # cup=\376G%p2%c%p1%c
12226 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
12227 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
12229 # Alas, there is no cursor upline capability on this display.
12231 # These entries add some 'sanity stuff' to the clear function. That is, it
12232 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
12233 # and turns off the cursor blinking and stuff like that.
12235 # NOTE: calling 'beep' turns on the backlight (bell)
12236 # NOTE: calling 'flash' turns it on and back off (visual bell)
12238 MtxOrb|Generic Matrix Orbital LCD display,
12239 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
12240 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
12241 flash=\376B\001$<200>\376F, home=\376H,
12242 MtxOrb204|20x4 Matrix Orbital LCD display,
12243 cols#20, lines#4, use=MtxOrb,
12244 MtxOrb162|16x2 Matrix Orbital LCD display,
12245 cols#16, lines#2, use=MtxOrb,
12248 ######## OLDER TERMINAL TYPES
12250 # This section is devoted to older commercial terminal brands that are now
12251 # discontinued, but known to be still in use or represented by emulations.
12254 #### AT&T (att, tty)
12256 # This section also includes Teletype-branded VDTs.
12258 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
12259 # Boundless Technologies); for details, see the header comment on the ADDS
12262 # These are AT&T's official terminfo entries. All-caps aliases have been
12265 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
12266 am, eo, mir, msgr, xon,
12267 cols#80, it#8, lines#24,
12268 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
12269 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12270 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12271 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12272 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12273 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12274 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12275 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
12276 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
12277 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
12278 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
12279 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12280 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
12282 att2350|AT&T 2350 Video Information Terminal 80 column mode,
12283 mc0@, mc4@, mc5@, use=att2300,
12285 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
12286 # Seems upward compatible with vt100, plus ins/del line/char.
12287 # On sgr, the protection parameter is ignored.
12288 # No check is made to make sure that only 3 parameters are output.
12289 # standout= reverse + half-intensity = 3 | 5.
12290 # bold= reverse + underline = 2 | 3.
12291 # note that half-bright blinking doesn't look different from normal blinking.
12292 # NOTE:you must program the function keys first, label second!
12293 # (att4410: a BSD entry has been seen with the following capabilities:
12294 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
12295 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
12296 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
12297 am, hs, mir, msgr, xon,
12298 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12299 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
12301 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
12302 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
12303 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
12304 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
12305 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
12306 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
12307 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
12308 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
12309 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
12310 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
12311 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
12313 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12314 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
12315 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
12316 ll=\E[24H, nel=\r\n,
12317 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
12319 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12320 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12322 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12323 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12324 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12325 tsl=\E7\E[25;%p1%{1}%+%dH,
12327 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
12329 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
12331 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
12333 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
12336 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
12338 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
12340 # 5410 in terms of a vt100
12341 # (v5410: added <rmam>/<smam> based on init string -- esr)
12342 v5410|att5410 in terms of a vt100,
12343 am, mir, msgr, xon,
12344 cols#80, it#8, lines#24, vt#3,
12345 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12346 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
12347 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12348 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
12349 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
12350 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
12351 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
12352 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12353 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
12354 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
12355 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
12357 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
12358 %;m%?%p9%t\016%e\017%;$<2>,
12359 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
12360 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
12364 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
12365 # even! the 5420 has three modes: scroll, window or page mode
12366 # this terminfo should work in scroll or window mode, but doesn't
12367 # take advantage of any of the differences between them.
12369 # Has memory below (2 lines!)
12370 # 3 pages of memory (plus some spare)
12371 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
12372 # <hpa>, <hts> would work for these, but these work in both scroll and window
12373 # mode... Unset insert character so insert mode works
12374 # <is1> sets 80 column mode,
12375 # <is2> escape sequence:
12376 # 1) turn off all fonts
12377 # 2) function keys off, keyboard lock off, control display off,
12378 # insert mode off, erasure mode off,
12379 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
12380 # 4) reset origin mode
12381 # 5) set line wraparound
12382 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
12384 # 8) program ENTER to transmit ^J,
12385 # We use \212 to program the ^J because a bare ^J will get translated by
12386 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
12388 # <is3> set screen color to black,
12389 # No representation in terminfo for the delete word key: kdw1=\Ed
12390 # Key capabilities assume the power-up send sequence...
12391 # This <rmcup> is not strictly necessary, but it helps maximize
12392 # memory usefulness: <rmcup=\Ez>,
12393 # Alternate sgr0: <sgr0=\E[m\EW^O>,
12394 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
12395 # smkx programs the SYS PF keys to send a set sequence.
12396 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
12397 # This string causes them to send the strings <kf1>-<kf8>
12398 # when pressed in SYS PF mode.
12399 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
12400 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
12401 OTbs, db, mir, xon,
12402 lh#2, lm#78, lw#8, nlab#8, wsl#55,
12403 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
12404 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
12405 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
12406 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
12407 flash=\E[?5h$<200>\E[?5l, home=\E[x,
12408 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
12409 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
12410 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12411 \E[4i\Ex\E[21;1j\212,
12412 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
12413 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
12414 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12415 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12416 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12417 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
12418 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
12419 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
12420 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
12421 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
12422 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
12423 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12424 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12425 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
12426 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
12427 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12430 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
12431 cols#132, lm#54, wsl#97,
12432 is1=\E[?3h$<100>, use=att4415,
12434 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
12435 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
12437 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
12438 cols#132, lm#54, wsl#97,
12439 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
12442 # Note that this mode permits programming USER PF KEYS and labels
12443 # However, when you program user pf labels you have to reselect
12444 # user pf keys to make them appear!
12445 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
12446 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
12447 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12449 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
12451 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
12452 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12455 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
12456 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12459 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
12460 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12463 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
12464 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12467 att5420_2|AT&T 5420 model 2 80 cols,
12468 am, db, hs, mir, msgr, xon,
12469 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12470 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12471 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
12472 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12473 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
12474 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
12475 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12476 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
12477 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
12478 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
12479 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12480 indn=\E[%p1%dE, invis=\E[8m,
12481 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
12482 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12484 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
12485 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
12486 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
12487 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
12488 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12489 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12490 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
12491 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
12492 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
12494 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
12495 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
12496 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12498 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12499 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
12500 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
12501 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12502 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12503 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
12505 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
12506 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12510 att4418|att5418|AT&T 5418 80 cols,
12513 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12514 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
12515 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12516 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12517 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
12518 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
12519 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
12520 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
12521 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
12522 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
12523 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
12524 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
12525 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
12526 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
12527 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12528 att4418-w|att5418-w|AT&T 5418 132 cols,
12530 is1=\E[?3h, use=att5418,
12532 att4420|tty4420|teletype 4420,
12533 OTbs, da, db, eo, msgr, ul, xon,
12534 cols#80, lines#24, lm#72,
12535 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
12536 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
12537 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
12538 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
12539 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
12540 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
12541 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
12542 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
12544 # The following is a terminfo entry for the Teletype 4424
12545 # asynchronous keyboard-display terminal. It supports
12546 # the vi editor. The terminal must be set up as follows,
12548 # HIGHLIGHT DEFINITION 3-TONE
12549 # DISPLAY FUNCTION GROUP III
12551 # The second entry below provides limited (a la adm3a)
12552 # operation under GROUP II.
12554 # This must be used with DISPLAY FUNCTION GROUP I or III
12555 # and HIGHLIGHT DEFINITION 3-TONE
12556 # The terminal has either bold or blink, depending on options
12558 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
12559 att4424|tty4424|teletype 4424,
12562 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12563 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
12564 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12565 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
12566 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
12567 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
12568 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12569 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
12570 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12571 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12572 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
12574 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
12575 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
12576 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
12579 att4424-1|tty4424-1|teletype 4424 in display function group I,
12580 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
12583 # This entry is not one of AT&T's official ones, it was translated from the
12584 # 4.4BSD termcap file. The highlight strings are different from att4424.
12585 # I have no idea why this is -- older firmware version, maybe?
12586 # The following two lines are the comment originally attached to the entry:
12587 # This entry appears to avoid the top line - I have no idea why.
12588 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
12589 att4424m|tty4424m|teletype 4424M,
12591 cols#80, it#8, lines#23,
12592 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12593 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
12594 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
12595 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12596 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12597 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
12598 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12600 # The Teletype 5425 is really version 2 of the Teletype 5420. It
12601 # is quite similar, except for some minor differences. No page
12602 # mode, for example, so all of the <cup> sequences used above have
12603 # to change back to what's being used for the 5410. Many of the
12604 # option settings have changed their numbering as well.
12606 # This has been tested on a preliminary model.
12608 # (att5425: added <rmam>/<smam> based on the init string -- esr)
12609 att5425|tty5425|att4425|AT&T 4425/5425,
12610 am, da, db, hs, mir, msgr, xenl, xon,
12611 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12612 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12613 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12614 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
12615 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12616 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12617 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12618 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12619 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
12620 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
12621 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
12622 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12623 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
12624 invis=\E[8m, is1=\E<\E[?3l$<100>,
12625 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12626 \E[4i\Ex\E[25;1j\212,
12627 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12628 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12629 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
12630 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
12631 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
12632 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
12634 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12635 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
12636 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
12637 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
12638 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
12639 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12640 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12641 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12642 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
12643 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
12644 vpa=\E[%p1%{1}%+%dd,
12646 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
12647 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
12649 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
12650 cols#132, lm#54, wsl#97,
12651 is1=\E[?3h$<100>, use=tty5425,
12653 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
12654 # I also added <rmam>/<smam> -- esr)
12655 att4426|tty4426|teletype 4426S,
12657 cols#80, lines#24, lm#48,
12658 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12659 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
12660 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
12661 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12662 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
12663 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
12664 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
12665 il=\E[%p1%dL, il1=\EL, ind=\n, indn=\E[%p1%dS,
12666 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
12667 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12668 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
12669 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
12670 nel=\r\n, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
12671 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
12672 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
12673 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
12676 # Terminfo entry for the AT&T 510 A Personal Terminal
12677 # Function keys 9 - 16 are available only after the
12678 # screen labeled (soft keys/action blocks) are labeled. Function key
12679 # 9 corresponds to the leftmost touch target on the screen,
12680 # function key 16 corresponds to the rightmost.
12682 # This entry is based on one done by Ernie Rice at Summit, NJ and
12683 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
12684 att510a|bct510a|AT&T 510A Personal Terminal,
12685 am, mir, msgr, xenl, xon,
12686 cols#80, lh#2, lines#24, lw#7, nlab#8,
12687 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12688 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12689 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
12690 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12691 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12692 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
12693 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
12694 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
12695 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
12696 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
12697 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
12698 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
12699 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
12700 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
12701 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
12702 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12703 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
12704 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12705 %|%t;7%;m%?%p9%t\016%e\017%;,
12706 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
12707 smul=\E[4m, tbc=\E[3g,
12709 # Terminfo entry for the AT&T 510 D Personal Terminal
12710 # Function keys 9 through 16 are accessed by bringing up the
12712 # Function key 9 corresponds to the leftmost touch target on the screen,
12713 # function key 16 corresponds to the rightmost.
12715 # There are problems with soft key labeling. These are due to
12716 # strangenesses in the native terminal that are impossible to
12717 # describe in a terminfo.
12718 att510d|bct510d|AT&T 510D Personal Terminal,
12719 am, da, db, mir, msgr, xenl, xon,
12720 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
12721 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12722 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12723 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
12724 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12725 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12726 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
12727 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
12728 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
12729 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12730 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
12731 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
12732 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12733 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
12734 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
12735 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
12736 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
12737 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
12738 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12739 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12740 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
12741 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
12742 rs2=\E[5;0|, sc=\E7,
12743 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12744 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12745 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
12746 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
12747 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12749 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
12750 att500|att513|AT&T 513 using page mode,
12751 am, chts, mir, msgr, xenl, xon,
12752 cols#80, lh#2, lines#24, lw#8, nlab#8,
12753 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12754 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12755 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
12756 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12757 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12758 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12759 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
12760 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12761 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12762 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12763 indn=\E[%p1%dE, invis=\E[8m,
12764 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
12765 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12766 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12767 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
12768 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
12769 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
12770 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
12771 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
12772 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12773 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
12774 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12775 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
12776 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
12777 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12778 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12779 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
12780 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
12781 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
12783 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12785 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12787 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
12788 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12789 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12790 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
12791 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
12793 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
12794 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
12795 rs2=\E[5;0|, sc=\E7,
12796 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12797 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12798 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
12799 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
12800 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12803 # printer must be set to EMUL ANSI to accept ESC codes
12804 # <cuu1> stops at top margin
12805 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
12806 # and alt font ascii,wrap on,tabs cleared
12807 # <is2> disables newline on LF,Emphasized off
12808 # The <u0> capability sets form length
12809 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
12811 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
12812 orhi#100, orl#12, orvi#72,
12813 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
12814 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
12815 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
12818 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
12819 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
12820 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
12821 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
12822 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
12823 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
12825 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
12826 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
12827 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
12828 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
12830 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
12831 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
12832 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
12833 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
12834 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
12836 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
12837 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
12838 u0=\E[%p1%dt, vpa=\E[%p1%dd,
12840 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
12841 # The following SET-UP modes are assumed for normal operation:
12842 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
12843 # Other SET-UP modes may be set for operator convenience or communication
12844 # requirements. This termcap description is for the Resident Terminal Mode.
12845 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12846 # The BRL entry also said: UNSAFE :ll=\E[70H:
12847 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
12849 cols#88, it#8, lines#70, vt#3,
12850 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12851 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12852 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12853 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
12854 il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
12855 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12856 kll=\E[70;1H, nel=\r\n, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
12859 # 5620 terminfo (2.0 or later ROMS with char attributes)
12860 # The following SET-UP modes are assumed for normal operation:
12861 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
12862 # Other SET-UP modes may be set for operator convenience or communication
12863 # requirements. This termcap description is for Resident Terminal Mode. No
12864 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12865 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
12866 # Be aware that older versions of the dmd have a firmware bug that affects
12867 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
12868 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
12869 # also has <ll>=\E[70H commented out and marked unsafe.
12870 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
12871 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
12872 OTbs, am, msgr, npc, xon,
12873 cols#88, it#8, lines#70,
12874 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
12875 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12876 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
12877 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12878 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
12879 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12880 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\n,
12881 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
12882 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
12883 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
12884 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
12885 lines#24, use=att5620,
12886 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
12887 lines#34, use=att5620,
12888 # 5620 layer running the "S" system's downloaded graphics handler:
12889 att5620-s|tty5620-s|layer|vitty|5620 S layer,
12891 cols#80, it#8, lines#72,
12892 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
12893 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
12894 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
12895 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12898 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
12900 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
12901 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
12902 att605|AT&T 605 80 column 102key keyboard,
12904 cols#80, lines#24, lw#8, nlab#8, wsl#80,
12905 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12906 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
12907 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
12908 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12909 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12910 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12911 il1=\E[L, ind=\n, invis=\E[8m,
12912 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
12913 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
12914 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12915 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
12916 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
12917 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
12918 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
12919 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
12920 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
12921 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
12922 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
12923 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
12924 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
12925 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
12926 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12927 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12928 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12929 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12930 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
12931 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12932 tsl=\E7\E[25;%i%p1%dx,
12933 att605-pc|ATT 605 in pc term mode,
12934 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
12936 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
12937 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
12938 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12939 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
12940 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
12941 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
12942 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
12943 xoffc=g, xonc=e, use=att605,
12944 att605-w|AT&T 605-w 132 column 102 key keyboard,
12946 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
12947 # (att610: I added <rmam>/<smam> based on the init string. I also
12948 # added <indn> and <rin> because the BSD file says the att615s have them,
12949 # and the 615 is like a 610 with a big keyboard, and most of their other
12950 # smart terminals support the same sequence -- esr)
12951 att610|AT&T 610; 80 column; 98key keyboard,
12952 am, eslok, hs, mir, msgr, xenl, xon,
12953 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12954 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12955 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12956 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12957 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12958 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12959 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12960 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12961 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12962 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12963 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12964 indn=\E[%p1%dS, invis=\E[8m,
12965 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
12966 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12967 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12968 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12969 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12970 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12971 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
12973 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12974 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12975 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12976 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
12977 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12978 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12979 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12980 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
12981 att610-w|AT&T 610; 132 column; 98key keyboard,
12983 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12986 att610-103k|AT&T 610; 80 column; 103key keyboard,
12987 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12988 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12989 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12990 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12991 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12992 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12993 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
12994 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
12995 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
12996 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
12997 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
12998 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
12999 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
13000 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
13002 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13004 att615|AT&T 615; 80 column; 98key keyboard,
13005 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13006 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13007 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13008 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13009 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13010 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13011 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
13012 att615-w|AT&T 615; 132 column; 98key keyboard,
13013 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13014 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13015 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13016 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13017 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13018 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13019 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
13020 att615-103k|AT&T 615; 80 column; 103key keyboard,
13021 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
13022 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
13023 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
13024 # (att620: I added <rmam>/<smam> based on the init string and
13025 # <rin>/<indn> from a BSD termcap -- esr)
13026 att620|AT&T 620; 80 column; 98key keyboard,
13027 am, eslok, hs, mir, msgr, xenl, xon,
13028 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13029 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13030 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13031 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13032 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13033 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13034 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13035 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13036 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13037 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
13038 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13039 indn=\E[%p1%dS, invis=\E[8m,
13040 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
13041 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
13042 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13043 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13044 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13045 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
13046 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
13047 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
13048 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
13049 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
13050 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
13051 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
13052 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
13053 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13054 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13055 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13056 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
13057 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
13058 rs2=\Ec\E[?3l, sc=\E7,
13059 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13060 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
13061 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
13062 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
13063 tsl=\E7\E[25;%i%p1%dx,
13064 att620-w|AT&T 620; 132 column; 98key keyboard,
13066 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13068 att620-103k|AT&T 620; 80 column; 103key keyboard,
13069 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13070 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13071 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
13072 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
13073 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
13074 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
13075 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
13076 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
13077 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
13078 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
13079 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
13080 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
13081 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
13082 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
13083 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
13084 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
13086 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
13088 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13091 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
13092 # The following SETUP modes are assumed for normal operation:
13093 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
13094 # Font_Size=Large Non-Layers_Window_Cols=80
13095 # Non-Layers_Window_Rows=60
13096 # Other SETUP modes may be set for operator convenience or communication
13097 # requirements. Some capabilities assume a printer attached to the Aux EIA
13098 # port. This termcap description is for the Fixed Non-Layers Window. No
13099 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13100 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
13101 att630|AT&T 630 windowing terminal,
13102 OTbs, am, da, db, mir, msgr, npc, xon,
13103 cols#80, it#8, lines#60, lm#0,
13104 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
13105 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13106 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13107 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
13108 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
13109 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13110 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
13111 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
13112 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=\r,
13113 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
13114 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
13115 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
13116 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
13117 mc5=\E[?5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
13118 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
13119 rmul=\E[m, rs2=\Ec, sc=\E7,
13120 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
13122 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13123 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
13124 lines#24, use=att630,
13126 # This is the att700 entry for 700 native emulation of the AT&T 700
13127 # terminal. Comments are relative to changes from the 605V2 entry and
13128 # att730 on which the entry is based. Comments show the terminfo
13129 # capability name, termcap name, and description.
13131 # Here is what's going onm in the init string:
13132 # ESC [ 50;4| set 700 native mode (really is 605)
13133 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
13134 # ESC [ 53;0| set GenFlow to Xon/Xoff
13135 # ESC [ 8 ;0| set CR on NL
13136 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
13137 # ESC [ ? 4 l jump scroll
13138 # ESC [ ? 5 l/h video: normal (l); reverse (h)
13139 # ESC [ ?13 l Labels on
13140 # ESC [ ?15 l parity check = no
13141 # ESC [ 13 l monitor mode off
13142 # ESC [ 20 l LF on NL (not CRLF on NL)
13143 # ESC [ ? 7 h autowrap on
13144 # ESC [ 12 h local echo off
13145 # ESC ( B GO = ASCII
13146 # ESC ) 0 G1 = Special Char & Line Drawing
13147 # ESC [ ? 31 l Set 7 bit controls
13149 # Note: Most terminals, especially the 600 family use Reverse Video for
13150 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
13151 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
13152 # standout mode with \E[m (all normal attributes). The 730 entry simply
13153 # exits reverse video which would leave other current attributes intact. It
13154 # was assumed the 730 entry to be more correct so rmso has changed. The
13155 # 605V2 has no sequences to turn individual attributes off, thus its setting
13156 # and the rmso/smso settings from the 730.
13158 # Note: For the same reason as above in rmso I changed exit under-score mode
13159 # to specifically turn off underscore, rather than return to all normal
13162 # Note: The following pkey_xmit is taken from the 605V2 which contained the
13163 # capability as pfxl. It was changed here to pfx since pfxl
13164 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
13165 # allows strings to be parameters and label values must be programmed as
13166 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
13167 # and strings to be parameters. The 605V2 pfx entry should be examined later
13168 # in this regard. For reference the 730 pfxl entry is shown here for comparison
13170 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
13171 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13174 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13177 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13179 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
13183 # modular 10 pin Connector
13184 # Left side Right side
13185 # Pin 1 2 3 4 5 6 7 8 9 10
13187 # Key (notch) at bottom
13199 # The manual is 189 pages and is loaded with details about the escape codes,
13200 # etc..... Available from AT&T CIC 800-432-6600...
13201 # ask for Document number 999-300-660..
13203 att700|AT&T 700 24x80 column display w/102key keyboard,
13204 am, eslok, hs, mir, msgr, xenl, xon,
13205 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13206 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13207 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13208 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13209 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13210 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13211 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13212 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13213 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13214 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
13215 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
13216 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
13217 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
13218 \E(B\E)0\E[?31l\E[0m\017,
13219 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
13220 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13221 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
13222 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
13223 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
13224 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
13225 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
13226 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
13227 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
13228 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13229 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
13230 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13231 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
13232 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13233 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
13234 \s\s\s\s\s\s%;%p2%s,
13235 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13236 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13237 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
13238 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
13239 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13240 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13241 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
13242 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
13243 tsl=\E7\E[99;%i%p1%dx,
13245 # This entry was modified 3/13/90 by JWE.
13246 # fixes include additions of <enacs>, correcting <rep>, and modification
13247 # of <kHOM>. (See comments below)
13248 # att730 has status line of 80 chars
13249 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
13250 # the <kf25> and up keys are used for shifted system Fkeys
13251 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
13252 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
13253 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
13254 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
13255 # 102, 102+1, or 122 key keyboards
13257 # (att730: I added <rmam>/<smam> based on the init string -- esr)
13258 att730|AT&T 730 windowing terminal,
13259 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
13260 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
13261 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13262 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13263 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13264 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13265 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13266 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13267 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13268 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13269 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
13270 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
13271 ind=\ED, invis=\E[8m,
13272 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
13273 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
13274 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13275 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13276 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
13277 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
13278 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
13279 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
13280 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
13281 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
13282 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
13283 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
13284 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13285 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
13286 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13287 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
13288 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13289 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
13290 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13291 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13292 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
13293 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
13294 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13295 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13296 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13297 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
13298 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
13299 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
13300 lines#41, use=att730,
13301 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
13302 lines#24, use=att730,
13303 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
13304 flash=\E[?5l$<200>\E[?5h,
13305 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
13306 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
13307 lines#41, use=att730r,
13308 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
13309 lines#24, use=att730r,
13311 # The following represents the screen layout along with the associated
13312 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
13313 # not appear on the screen but are shown to reference the bezel buttons.
13314 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
13315 # position relative to the screen.
13319 # +----------------------------------------------------------------+
13321 # XXXX | kf0 kf24 | XXXX
13324 # XXXX | kf1 kf23 | XXXX
13327 # XXXX | kf2 kf22 | XXXX
13330 # XXXX | kf3 kf21 | XXXX
13333 # XXXX | kf4 kf20 | XXXX
13336 # XXXX | kf5 kf19 | XXXX
13339 # XXXX | kf6 kf18 | XXXX
13345 # +----------------------------------------------------------------+
13347 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
13349 # Note: XXXX represents the screen buttons
13355 # The character string sent by key 'kf26' may be user programmable
13356 # to send either \E[16s, or \E[26s.
13357 # The character string sent by key 'krfr' may be user programmable
13358 # to send either \E[17s, or \E[27s.
13360 # Depression of the "CMD" key sends \E! (kcmd)
13361 # Depression of the "MAIL" key sends \E[26s (kf26)
13362 # "REDRAW" same as "REFRESH" (krfr)
13364 # "kf" functions adds carriage return to output string if terminal is in
13367 # The following are functions not covered in the table above:
13369 # Set keyboard character (SKC): \EPn1;Pn2w
13370 # Pn1= 0 Back Space key
13372 # Pn2= Program char (hex)
13374 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
13375 # Pn1= Window number (1-39)
13376 # Pn2-Pn5= Y;X;Y;X coordinates
13378 # Screen Selection (SSL): \E[Pnu
13379 # Pn= Window number
13381 # Set Terminal Modes (SM): \E[Pnh
13382 # Pn= 3 Graphics mode
13383 # Pn= > Cursor blink
13384 # Pn= < Enter new line mode
13385 # Pn= = Enter reverse insert/replace mode
13386 # Pn= ? Enter no scroll mode
13388 # Reset Terminal Mode (RM): \E[Pnl
13389 # Pn= 3 Exit graphics mode
13390 # Pn= > Exit cursor blink
13391 # Pn= < Exit new line mode
13392 # Pn= = Exit reverse insert/replace mode
13393 # Pn= ? Exit no scroll mode
13395 # Screen Status Report (SSR): \E[Pnp
13396 # Pn= 0 Request current window number
13397 # Pn= 1 Request current window dimensions
13399 # Device Status Report (DSR): \E[6n Request cursor position
13401 # Call Status Report (CSR): \E[Pnv
13402 # Pn= 0 Call failed
13403 # Pn= 1 Call successful
13405 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
13406 # Pn1= Button number to be loaded
13407 # Pn2= Character count of "string"
13408 # Pn3= Key mode being loaded:
13412 # String= Text string (15 chars max)
13414 # Screen Number Report (SNR): \E[Pnp
13415 # Pn= Screen number
13417 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
13418 # Pn1= Number of rows available in window
13419 # Pn2= Number of columns available in window
13421 # Cursor Position Report (CPR): \E[Pn1;Pn2R
13422 # Pn1= "Y" Position of cursor
13423 # Pn2= "X" Position of cursor
13425 # Request Answer Back (RAB): \E[c
13427 # Answer Back Response (ABR): \E[?;*;30;VSV
13428 # *= 0 No printer available
13429 # *= 2 Printer available
13430 # V= Software version number
13431 # SV= Software sub version number
13432 # (printer-available field not documented in v1)
13434 # Screen Alignment Aid: \En
13436 # Bell (lower pitch): \E[x
13438 # Dial Phone Number: \EPdstring\
13439 # string= Phone number to be dialed
13441 # Set Phone Labels: \EPpstring\
13442 # string= Label for phone buttons
13444 # Set Clock: \EPchour;minute;second\
13446 # Position Clock: \EPsY;X\
13447 # Y= "Y" coordinate
13448 # X= "X" coordinate
13450 # Delete Clock: \Epr\
13452 # Programming The Function Buttons: \EPfPn;string\
13453 # Pn= Button number (00-06, 18-24)
13454 # (kf00-kf06, kf18-kf24)
13455 # string= Text to sent on button depression
13457 # The following in version 2 only:
13459 # Request For Local Directory Data: \EPp12;\
13461 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
13463 # Request for Local Directory Data in print format: \EPp13;\
13465 # Enable 'Prt on Line' mode: \022 (DC2)
13467 # Disable 'Prt on Line' mode: \024 (DC4)
13471 # The following Terminfo entry describes functions which are supported by
13472 # the AT&T 5430/pt505 terminal software version 2 and later.
13473 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
13475 cols#80, it#8, lines#24,
13476 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13477 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
13478 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
13479 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13480 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13481 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13482 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
13483 il=\E[%p1%dL, il1=\E[L, ind=\n,
13484 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
13485 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13486 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
13487 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
13488 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
13489 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
13490 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13491 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
13492 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
13493 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
13495 # The following Terminfo entry describes functions which are supported by
13496 # the AT&T 5430/pt505 terminal software version 1.
13497 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
13499 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
13500 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
13501 lines#22, use=att505,
13503 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
13504 # This cut mark helps make life less painful for people running ncurses tic
13505 # on machines with relatively little RAM. The file can be broken in half here
13506 # cleanly and compiled in sections -- no `use' references cross this cut
13510 #### Ampex (Dialogue)
13512 # Yes, these are the same people who are better-known for making audio- and
13513 # videotape. I'm told they are located in Redwood City, CA.
13516 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
13517 # (ampex80: some capabilities merged in from SCO's entry -- esr)
13518 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
13520 cols#80, it#8, lines#24,
13521 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
13522 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13523 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
13524 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
13525 smso=\Ej, smul=\El, tbc=\E3,
13526 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
13527 ampex175|ampex d175,
13530 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13531 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13532 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
13533 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
13534 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
13535 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
13536 # No backspace key in the main QWERTY cluster. Fortunately, it has a
13537 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
13538 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
13539 # mode), this key can be used as the erase key; I find I like this. Because
13540 # some people and some systems may not, there is another termcap ("ampex175")
13541 # that suppresses this little eccentricity by omitting the relevant capability.
13542 ampex175-b|ampex d175 using left arrow for erase,
13543 kbs=^_, use=ampex175,
13544 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
13545 # (ampex210: removed obsolete ":kn#10:" -- esr)
13546 ampex210|a210|ampex a210,
13547 OTbs, am, hs, xenl,
13548 cols#80, it#8, lines#24, xmc#1,
13549 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
13550 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13551 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
13552 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
13553 if=/usr/share/tabset/std, il1=\EE, invis@,
13554 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
13555 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
13556 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
13557 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
13558 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
13559 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
13560 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
13561 # and moved the padding to be *after* the caps -- esr)
13562 ampex219|ampex-219|amp219|Ampex with Automargins,
13564 cols#80, it#8, lines#24,
13565 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
13566 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
13567 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
13568 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
13569 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
13570 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
13571 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13572 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
13573 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
13574 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
13575 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
13576 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
13577 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
13578 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
13579 cols#132, lines#24,
13580 bel=^G, cr=\r, cud1=\n, ind=\n,
13581 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
13582 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
13583 ampex232|ampex-232|Ampex Model 232,
13585 cols#80, lines#24, xmc#1,
13586 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
13587 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13588 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
13589 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
13590 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
13591 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
13592 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
13593 kf9=^AI\r, khome=^^, use=adm+sgr,
13594 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
13595 ampex232w|Ampex Model 232 / 132 columns,
13596 cols#132, lines#24,
13597 is2=\E\034Eg\El, use=ampex232,
13599 #### Ann Arbor (aa)
13601 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
13602 # numbers of function keys. At least some used monitors in portrait mode,
13603 # allowing up to 76-character screen heights! They were reachable at:
13605 # Ann Arbor Terminals
13606 # 6175 Jackson Road
13607 # Ann Arbor, MI 48103
13610 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
13611 # can't be found on the Web; I fear they're long dead. R.I.P.
13615 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
13616 # Highly modified 6/22 by Mike O'Brien.
13617 # split out into several for the various screen sizes by dave-yost@rand
13618 # Modifications made 3/82 by Mark Horton
13619 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
13620 # status line moved to top of screen, <flash> removed 5/82
13621 # Some unknown person at SCO then hacked the init strings to make them more
13624 # assumes the following setup:
13625 # A menu: 0000 1010 0001 0000
13626 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13627 # C menu: 56 66 0 0 9600 0110 1100
13628 # D menu: 0110 1001 1 0
13630 # Briefly, the settings are for the following modes:
13631 # (values are for bit set/clear with * indicating our preference
13632 # and the value used to test these termcaps)
13633 # Note that many of these settings are irrelevant to the terminfo
13634 # and are just set to the default mode of the terminal as shipped
13637 # A menu: 0000 1010 0001 0000
13638 # Block/underline cursor*
13639 # blinking/nonblinking cursor*
13640 # key click/no key click*
13641 # bell/no bell at column 72*
13643 # key pad is cursor control*/key pad is numeric
13644 # return and line feed/return for <cr> key *
13645 # repeat after .5 sec*/no repeat
13646 # repeat at 25/15 chars per sec. *
13648 # hold data until pause pressed/process data unless pause pressed*
13649 # slow scroll/no slow scroll*
13650 # Hold in area/don't hold in area*
13651 # functions keys have default*/function keys disabled on powerup
13653 # show/don't show position of cursor during page transmit*
13658 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13659 # Baud rate (9600*)
13661 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
13662 # 1 stop bit*/2 stop bits
13663 # parity error detection off*/on
13665 # keyboard local/on line*
13666 # half/full duplex*
13667 # disable/do not disable keyboard after data transmission*
13669 # transmit entire page/stop transmission at cursor*
13670 # transfer/do not transfer protected characters*
13671 # transmit all characters/transmit only selected characters*
13672 # transmit all selected areas/transmit only 1 selected area*
13674 # transmit/do not transmit line separators to host*
13675 # transmit/do not transmit page tab stops tabs to host*
13676 # transmit/do not transmit column tab stop tabs to host*
13677 # transmit/do not transmit graphics control (underline,inverse..)*
13679 # enable*/disable auto XON/XOFF control
13680 # require/do not require receipt of a DC1 from host after each LF*
13681 # pause key acts as a meta key/pause key is pause*
13689 # XON character (17*)
13690 # XOFF character (19*)
13692 # C menu: 56 66 0 0 9600 0110 1100
13693 # number of lines to print data on (printer) (56*)
13695 # number of lines on a sheet of paper (printer) (66*)
13697 # left margin (printer) (0*)
13699 # number of pad chars on new line to printer (0*)
13701 # printer baud rate (9600*)
13703 # printer parity: 00=odd,01=even*,10=space,11=mark
13704 # printer stop bits: 2*/1
13705 # print/do not print guarded areas*
13707 # new line is: 01=LF,10=CR,11=CRLF*
13711 # D menu: 0110 1001 1 0
13712 # LF is newline/LF is down one line, same column*
13713 # wrap to preceding line if move left from col 1*/don't wrap
13714 # wrap to next line if move right from col 80*/don't wrap
13715 # backspace is/is not destructive*
13717 # display*/ignore DEL character
13718 # display will not/will scroll*
13719 # page/column tab stops*
13720 # erase everything*/erase unprotected only
13722 # editing extent: 0=display,1=line*,2=field,3=area
13727 annarbor4080|aa4080|ann arbor 4080,
13730 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
13731 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
13732 %{12}%+%;%{64}%+%c,
13733 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
13734 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
13736 # Strange Ann Arbor terminal from BRL
13737 aas1901|Ann Arbor K4080 w/S1901 mod,
13740 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
13741 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
13744 # If you're using the GNU termcap library, add
13745 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
13746 # to these capabilities. This is the nonstandard GNU termcap scrolling
13747 # capability, arguments are:
13748 # 1. Total number of lines on the screen.
13749 # 2. Number of lines above desired scroll region.
13750 # 3. Number of lines below (outside of) desired scroll region.
13751 # 4. Total number of lines on the screen, the same as the first parameter.
13752 # The generic Ann Arbor entry is the only one that uses this.
13753 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
13754 OTbs, am, km, mc5i, mir, xon,
13756 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13757 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
13758 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
13759 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13760 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13761 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13762 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
13763 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
13764 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
13765 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13766 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
13767 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
13768 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
13769 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
13770 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
13771 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
13772 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
13773 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13774 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
13776 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
13777 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
13780 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
13782 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13783 vpa=\E[%p1%{1}%+%dd,
13785 aaa+rv|ann arbor ambassador in reverse video,
13786 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
13787 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13788 rs1=\E[H\E[7m\E[J$<156>,
13789 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
13790 %;%?%p7%t8;%;m\016,
13791 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
13792 # Ambassador with the DEC option, for partial vt100 compatibility.
13793 aaa+dec|ann arbor ambassador in dec vt100 mode,
13794 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
13795 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
13796 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
13797 %p7%t8;%;m%?%p9%t\017%e\016%;,
13799 aaa-18|ann arbor ambassador/18 lines,
13801 is2=\E7\E[60;0;0;18p\E8,
13802 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
13804 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
13805 use=aaa+rv, use=aaa-18,
13806 aaa-20|ann arbor ambassador/20 lines,
13808 is2=\E7\E[60;0;0;20p\E8,
13809 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
13811 aaa-22|ann arbor ambassador/22 lines,
13813 is2=\E7\E[60;0;0;22p\E8,
13814 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
13816 aaa-24|ann arbor ambassador/24 lines,
13818 is2=\E7\E[60;0;0;24p\E8,
13819 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
13821 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
13822 use=aaa+rv, use=aaa-24,
13823 aaa-26|ann arbor ambassador/26 lines,
13825 is2=\E7\E[60;0;0;26p\E8,
13826 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
13827 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
13828 aaa-28|ann arbor ambassador/28 lines,
13830 is2=\E7\E[60;0;0;28p\E8,
13831 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
13832 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
13833 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
13836 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13837 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
13838 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
13839 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
13840 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13841 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
13842 use=aaa+rv, use=aaa-30-s,
13843 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
13844 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13845 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
13846 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
13847 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13848 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
13849 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
13851 is2=\E7\E[60;0;0;30p\E8,
13852 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
13853 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
13854 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
13855 use=aaa+rv, use=aaa-30,
13856 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
13857 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13859 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
13860 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13861 use=aaa+rv, use=aaa-30,
13862 aaa-36|ann arbor ambassador/36 lines,
13864 is2=\E7\E[60;0;0;36p\E8,
13865 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
13866 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
13867 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
13868 use=aaa+rv, use=aaa-36,
13869 aaa-40|ann arbor ambassador/40 lines,
13871 is2=\E7\E[60;0;0;40p\E8,
13872 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
13873 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
13874 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
13875 use=aaa+rv, use=aaa-40,
13876 aaa-48|ann arbor ambassador/48 lines,
13878 is2=\E7\E[60;0;0;48p\E8,
13879 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
13880 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
13881 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
13882 use=aaa+rv, use=aaa-48,
13883 aaa-60-s|ann arbor ambassador/59 lines+status,
13886 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13887 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
13888 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13889 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
13890 use=aaa+rv, use=aaa-60-s,
13891 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
13892 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
13893 aaa-60|ann arbor ambassador/60 lines,
13895 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
13897 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
13898 use=aaa+rv, use=aaa-60,
13899 aaa-db|ann arbor ambassador 30/destructive backspace,
13901 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
13903 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
13905 flash=\E[>59h$<100>\E[>59l,
13906 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
13907 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
13908 guru+rv|guru changes for reverse video,
13909 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
13910 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
13911 use=guru+rv, use=guru-33,
13912 guru+s|guru status line,
13914 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
13915 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
13916 tsl=\E[>51h\E[1;%p1%dH\E[2K,
13917 guru-nctxt|guru with no saved context,
13918 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
13919 guru-s|guru-33-s|ann arbor guru/33 lines+status,
13921 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
13922 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13923 guru-24|ann arbor guru 24 lines,
13925 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
13927 guru-44|ann arbor guru 44 lines,
13929 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
13931 guru-44-s|ann arbor guru/44 lines+status,
13933 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
13934 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13935 guru-76|guru with 76 lines by 89 cols,
13937 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
13939 guru-76-s|ann arbor guru/76 lines+status,
13941 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
13942 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13943 guru-76-lp|guru-lp|guru with page bigger than line printer,
13944 cols#134, lines#76,
13945 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
13947 guru-76-w|guru 76 lines by 178 cols,
13948 cols#178, lines#76,
13949 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
13951 guru-76-w-s|ann arbor guru/76 lines+status+wide,
13952 cols#178, lines#75,
13953 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
13954 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13955 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
13956 cols#178, lines#76,
13957 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
13959 aaa-rv-unk|ann arbor unknown type,
13960 lh#0, lw#0, nlab#0,
13961 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
13962 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13964 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
13966 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
13968 #### Applied Digital Data Systems (adds)
13970 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
13971 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
13972 # terminals was merged again. Then AT&T sold the terminal business to
13973 # SunRiver, which later changed its name to Boundless Technologies. The
13974 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
13975 # as of early 1995) are at:
13977 # Boundless Technologies
13978 # 100 Marcus Boulevard
13979 # Hauppauge, NY 11788-3762
13980 # Vox: (800)-231-5445
13981 # Fax: (516)-342-7378
13982 # Web: http://boundless.com
13984 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
13985 # In 1995 Boundless acquired DEC's terminals business.
13988 # Regent: lowest common denominator, works on all regents.
13989 # (regent: renamed ":bc:" to ":le:" -- esr)
13990 regent|Adds Regent Series,
13993 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
13994 home=\EY\s\s, ind=\n, ll=^A,
13995 # Regent 100 has a bug where if computer sends escape when user is holding
13996 # down shift key it gets confused, so we avoid escape.
13997 regent100|Adds Regent 100,
14000 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
14001 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
14002 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
14003 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
14004 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
14005 regent20|Adds Regent 20,
14006 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
14008 regent25|Adds Regent 25,
14009 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
14011 regent40|Adds Regent 40,
14013 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
14014 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
14015 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
14016 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
14017 smul=\E0`, use=regent25,
14018 regent40+|Adds Regent 40+,
14019 is2=\EB, use=regent40,
14020 regent60|regent200|Adds Regent 60,
14021 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
14022 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
14024 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
14025 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
14026 viewpoint|addsviewpoint|adds viewpoint,
14029 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
14030 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
14031 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
14032 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
14033 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
14034 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
14035 # Some viewpoints have bad ROMs that foo up on ^O
14036 screwpoint|adds viewpoint with ^O bug,
14037 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
14039 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
14040 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
14041 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
14042 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
14043 # invis=01000100 and %c is the logical or of desired attributes.
14044 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
14046 # Update by TD - 2004:
14048 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
14050 # COMMANDS ASCII CODE
14052 # Address, Absolute ESC,=,row,column
14054 # Aux Port Enable ESC,@
14055 # Aux Port Disable ESC,A
14059 # Cursor forward FF
14062 # Cursor suppress ETB
14063 # Cursor enable CAN
14064 # Erase to end of line ESC,T
14065 # Erase to end of page ESC,Y
14068 # Keyboard unlock SO
14069 # Read current cursor position ESC,?
14070 # Set Attribute ESC,0,x (see below for values of x)
14071 # Tag bit reset ESC,(
14072 # Tag bit set ESC,)
14073 # Transparent Print on ESC,3
14074 # Transparent Print off ESC,4
14080 # Half Intensity A 0101
14082 # Half Intensity Blinking C 0103
14083 # Reverse Video P 0120
14084 # Reverse Video Half Intensity Q 0121
14085 # Reverse Video Blinking R 0122
14086 # Reverse Video Half Intensity
14088 # Underlined ` 0140
14089 # Underlined Half Intensity a 0141
14090 # Underlined Blinking b 0142
14091 # Underlined Half Intensity
14093 # Video suppress D 0104
14094 vp3a+|viewpoint3a+|adds viewpoint 3a+,
14096 cols#80, it#8, lines#24,
14097 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
14098 cub1=^H, cud1=\n, cuf1=^L,
14099 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
14100 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
14101 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
14102 nel=\r\n, rev=\E0P\E), rmso=\E(,
14103 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
14104 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
14105 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
14106 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
14107 vp60|viewpoint60|addsvp60|adds viewpoint60,
14110 # adds viewpoint 90 - from cornell
14111 # Note: emacs sends ei occasionally to insure the terminal is out of
14112 # insert mode. This unfortunately puts the viewpoint90 IN insert
14113 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
14114 # - :ei=:im=: must be present in the termcap translation.)
14115 # - <xhp> indicates glitch that attributes stick to location
14116 # - <msgr> means it's safe to move in standout mode
14117 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
14119 # Function key and label capabilities merged in from SCO.
14120 vp90|viewpoint90|adds viewpoint 90,
14121 OTbs, bw, msgr, xhp,
14123 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
14124 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
14125 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
14126 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
14127 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
14128 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
14129 kf7=^B8\r, kf8=^B9\r, kf9=\002\:\r, khome=^A, lf0=F1, lf1=F2,
14130 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
14131 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
14132 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
14133 # Note: if return acts weird on a980, check internal switch #2
14134 # on the top chip on the CONTROL pc board.
14135 adds980|a980|adds consul 980,
14138 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
14139 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
14140 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
14141 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
14142 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
14144 #### C. Itoh Electronics
14146 # As of 1995 these people no longer make terminals (they're still in the
14147 # printer business). Their terminals were all clones of the DEC VT series.
14148 # They're located in Orange County, CA.
14151 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
14152 # the delay times and do an auto tab set rather than the indirect
14153 # file used in vt100.
14154 cit80|cit-80|citoh 80,
14157 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
14158 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
14159 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
14160 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
14161 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
14162 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
14163 cit101|citc|C.itoh fast vt100,
14166 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
14167 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14168 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14169 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
14170 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
14171 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14172 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
14173 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
14175 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
14176 # The following termcap entry was created from the Callan cd100 entry. The
14177 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
14178 # full selection of combinations of reverse video, underline, and blink.
14179 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
14180 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
14181 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
14182 cit101e|C. Itoh CIT-101e,
14183 OTbs, OTpt, am, mir, msgr,
14184 cols#80, it#8, lines#24,
14185 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
14186 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
14187 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
14188 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
14189 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
14190 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
14191 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
14192 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
14193 smkx=\E=, smso=\E[7m, smul=\E[4m,
14194 # From: David S. Lawyer, June 1997:
14195 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
14196 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
14197 # late 1980's CIT Terminals went out of business.
14198 # There is no need to use the initialization string is=... (by invoking
14199 # tset or setterm etc.) provided that the terminal has been manually set
14200 # up (and the setup saved with ^S) to be compatible with this termcap. To be
14201 # compatible it should be in ANSI mode (not VT52). A set-up that
14202 # works is to set all the manually settable stuff to factory defaults
14203 # by pressing ^D in set-up mode. Then increase the brightness with the
14204 # up-arrow key since the factory default will likely be dim on an old
14205 # terminal. Then change any options you want (provided that they are
14206 # compatible with the termcap). For my terminal I set: Screen
14207 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
14208 # on. I also set up mine for parity (but you may not need it). Then
14209 # save the setup with ^S.
14210 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
14211 cit101e-rv|Citoh CIT-101e (sets reverse video),
14212 am, eo, mir, msgr, xenl, xon,
14213 cols#80, it#8, lines#24,
14214 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14215 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
14216 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14217 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14218 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14219 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14220 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
14221 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14222 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
14223 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
14224 B\E[m\E[20l\E[1;24r\E[24;1H,
14225 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14226 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
14227 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
14228 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
14229 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
14230 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
14231 u7=\E[6n, u8=\E[?6c, u9=\E[c,
14232 cit101e-n|CIT-101e w/o am,
14234 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14236 cit101e-132|CIT-101e with 132 cols,
14238 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
14239 cit101e-n132|CIT-101e with 132 cols w/o am,
14242 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14244 # CIE Terminals CIT-500 from BRL
14245 # The following SET-UP modes are assumed for normal operation:
14246 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
14247 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
14248 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
14249 # Other SET-UP modes may be set for operator convenience or communication
14251 # Hardware tabs are assumed to be set every 8 columns; they can be set up
14252 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
14253 # "stty ixon -ixany" to enable DC3/DC1 flow control!
14254 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
14255 cit500|CIE Terminals CIT-500,
14256 OTbs, OTpt, mir, msgr, xon,
14257 OTkn#10, cols#80, it#8, lines#64, vt#3,
14258 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14259 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
14260 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
14261 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14262 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14263 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
14264 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
14265 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
14266 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
14267 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
14268 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
14269 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
14270 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
14271 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
14272 rmso=\E[m, rmul=\E[m,
14273 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
14274 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
14275 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14277 # C. Itoh printers begin here
14278 citoh|ci8510|8510|c.itoh 8510a,
14281 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
14282 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
14284 citoh-pica|citoh in pica,
14285 is1=\EN, use=citoh,
14286 citoh-elite|citoh in elite,
14289 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14292 citoh-comp|citoh in compressed,
14295 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14296 \,097\,105\,113\,121\,129.,
14298 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
14299 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
14301 is1=\EP, use=citoh,
14302 citoh-6lpi|citoh in 6 lines per inch mode,
14303 is3=\EA, use=citoh,
14304 citoh-8lpi|citoh in 8 lines per inch mode,
14306 is3=\EB, use=citoh,
14308 #### Control Data (cdc)
14311 cdc456|cdc 456 terminal,
14314 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14315 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
14316 el=^V, home=^Y, il1=\EL, ind=\n,
14318 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
14322 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14323 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14324 kcuu1=^W, khome=^Y,
14325 cdc721ll|CDC Viking with long lines,
14327 cols#132, lines#24,
14328 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14329 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14330 kcuu1=^W, khome=^Y,
14331 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
14335 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14336 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
14337 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
14339 # The following switch/key settings are assumed for normal operation:
14340 # 96 chars SCROLL FULL duplex not BLOCK
14341 # Other switches may be set according to communication requirements.
14342 # Insert/delete-character cannot be used, as the whole display is affected.
14343 # "so" & "se" are commented out until jove handles "sg" correctly.
14346 OTkn#10, cols#80, lines#24,
14347 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14348 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
14349 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
14350 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
14351 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
14352 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
14353 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
14354 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
14357 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
14359 # Part of the long initialization string defines the "DOWN" key to the left
14360 # of the tab key to send an ESC. The real ESC key is positioned way out
14363 # The termcap won't work in 132 column mode due to the way it it moves the
14364 # cursor. Termcap doesn't have the capability (as far as I could tell) to
14365 # handle the 721 in 132 column mode.
14367 # (cdc721: changed :ri: to :sr: -- esr)
14368 cdc721-esc|Control Data 721,
14369 OTbs, OTpt, am, bw, msgr, xon,
14370 OTkn#10, cols#80, it#8, lines#30,
14371 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
14372 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
14373 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
14374 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
14375 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
14376 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
14377 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
14379 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
14380 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
14381 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
14382 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
14383 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
14388 # Getronics is a Dutch electronics company that at one time was called
14389 # `Geveke' and made async terminals; but (according to the company itself!)
14390 # they've lost all their documentation on the command set. The hardware
14391 # documentation suggests the terminals were actually manufactured by a
14392 # Taiwanese electronics company named Cal-Comp. There are known
14393 # to have been at least two models, the 33 and the 50.
14396 # The 50 seems to be a top end vt220 clone, with the addition of a higher
14397 # screen resolution, a larger screen, at least 1 page of memory above and
14398 # below the screen, apparently pages of memory right and left of the screen
14399 # which can be panned, and about 75 function keys (15 function keys x normal,
14400 # shift, control, func A, func B). It also has more setup possibilities than
14401 # the vt220. The monitor case is dated November 1978 and the keyboard case is
14404 # The vt100 emulation works as is. The entry below describes the rather
14405 # non-conformant (but more featureful) ANSI mode.
14407 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
14408 visa50|geveke visa 50 terminal in ansi 80 character mode,
14411 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
14412 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
14413 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14414 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14415 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14416 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
14417 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
14418 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
14419 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
14420 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
14421 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
14422 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
14423 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
14424 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
14425 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
14426 lf3=A insert line, lf4=A delete line, lf5=A clear,
14427 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
14428 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
14429 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
14430 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
14431 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
14434 #### Human Designed Systems (Concept)
14436 # Human Designed Systems
14438 # King of Prussia, PA 19406
14439 # Vox: (610)-277-8300
14440 # Fax: (610)-275-5739
14441 # Net: support@hds.com
14443 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
14444 # the character-terminal business now (1995) and making X terminals. In
14445 # particular, the whole `Concept' line described here was discontinued long
14449 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
14450 # Extensive changes to c108 by arpavax:eric Feb 1982
14451 # Some unknown person at SCO then translated it to terminfo.
14453 # There seem to be a number of different versions of the C108 PROMS
14454 # (with bug fixes in its Z-80 program).
14456 # The first one that we had would lock out the keyboard of you
14457 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
14458 # Try that on your C108 and see if it sends a ^S when you type it.
14459 # If so, you have an old version of the PROMs.
14461 # You should configure the C108 to send ^S/^Q before running this.
14462 # It is much faster (at 9600 baud) than the c100 because the delays
14464 # new status line display entries for c108-8p:
14465 # <is3> - init str #3 - setup term for status display -
14466 # set programmer mode, select window 2, define window at last
14467 # line of memory, set bkgnd stat mesg there, select window 0.
14469 # <tsl> - to status line - select window 2, home cursor, erase to
14470 # end-of-window, 1/2 bright on, goto(line#0, col#?)
14472 # <fsl> - from status line - 1/2 bright off, select window 0
14474 # <dsl> - disable status display - set bkgnd status mesg with
14477 # There are probably more function keys that should be added but
14478 # I don't know what they are.
14480 # No delays needed on c108 because of ^S/^Q handshaking
14482 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
14483 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
14485 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
14486 c108-4p|concept108-4p|concept 108 w/4 pages,
14487 OTbs, eslok, hs, xon,
14489 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
14490 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
14491 %>%t\001%{96}%-%;%{32}%+%c,
14492 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
14493 ind=\n, is1=\EK\E!\E F,
14494 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
14495 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
14496 smcup=\EU\Ev 8p\Ep\r\E\025,
14497 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
14498 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
14499 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
14501 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
14502 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
14504 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
14506 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
14507 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
14510 # These have only window relative cursor addressing, not screen
14511 # relative. To get it to work right here, smcup/rmcup (which
14512 # were invented for the concept) lock you into a one page
14513 # window for screen style programs.
14515 # To get out of the one page window, we use a clever trick:
14516 # we set the window size to zero ("\Ev " in rmcup) which the
14517 # terminal recognizes as an error and resets the window to all
14520 # This trick works on c100 but does not on c108, sigh.
14522 # Some tty drivers use cr3 for concept, others use nl3, hence
14523 # the delays on cr and ind below. This padding is only needed at
14524 # 9600 baud and up. One or the other is commented out depending on
14525 # local conventions.
14527 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
14528 # less than 6 but more than 2 will work.
14530 # Note: can't use function keys f7-f10 because they are
14531 # indistinguishable from arrow keys (!), also, del char and
14532 # clear eol use xon/xoff so they probably won't work very well.
14534 # Also note that we don't define insrt/del char/delline/eop/send
14535 # because they don't transmit unless we reset them - I figured
14536 # it was a bad idea to clobber their definitions.
14538 # The <mc5> sequence changes the escape character to ^^ so that
14539 # escapes will be passed through to the printer. Only trouble
14540 # is that ^^ won't be - ^^ was chosen to be unlikely.
14541 # Unfortunately, if you're sending raster bits through to be
14542 # plotted, any character you choose will be likely, so we lose.
14544 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
14545 # cannot be # in is2 because it will hang a c100 with no printer
14547 c100|concept100|concept|c104|c100-4p|hds concept 100,
14548 OTbs, am, eo, mir, ul, xenl,
14549 cols#80, lines#24, pb#9600, vt#8,
14550 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
14551 cub1=^H, cud1=\n, cuf1=\E=,
14552 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
14553 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
14554 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
14555 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
14557 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
14558 \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
14559 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
14560 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
14561 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
14562 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
14563 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
14564 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
14565 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
14566 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
14567 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
14568 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
14569 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
14570 smso=\ED, smul=\EG,
14571 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
14572 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
14573 smso=\EE, use=c100,
14574 oc100|oconcept|c100-1p|old 1 page concept 100,
14578 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
14579 # Lots of notes, originally inline, but ncurses doesn't grok that.
14581 # am: not available in power on mode, but turned on with \E[=107;207h in
14582 # is2=. Also, \E=124l in is2= could have been used to prevent needing
14583 # to specify xenl:, but that would have rendered the last space on the
14584 # last line useless.
14585 # bw: Not available in power on mode, but turned on with \E[=107;207h in
14587 # clear: Could be done with \E[2J alone, except that vi (and probably most
14588 # other programs) assume that this also homes the cursor.
14589 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
14590 # scroll the window, and go back to window 1.
14591 # is2: the string may cause a warning to be issued by tic that it
14592 # found a very long line and that it suspects that a comma is missing
14593 # somewhere. This warning can be ignored (unless it comes up more than
14594 # once). The initialization string contains the following commands:
14596 # [Setup mode items changed from factory defaults:]
14597 # \E)0 set alternate character set to
14599 # ^O set character set to default
14600 # [In case it wasn't]
14601 # \E[m turn off all attributes
14602 # [In case they weren't off]
14603 # \E[=107; cursor wrap and
14604 # 207h character wrap on
14605 # \E[90;3u set Fkey definitions to "transmit"
14607 # \E[92;3u set cursor key definitions to
14608 # "transmit" defaults
14609 # \E[43;1u set shift F13 to transmit...
14611 # \E[44;1u set shift F14 to transmit...
14613 # \E[45;1u set shift F15 to transmit...
14615 # \E[46;1u set shift F16 to transmit...
14617 # \E[200;1u set shift up to transmit...
14619 # \E[201;1u set shift down to transmit...
14621 # \E[202;1u set shift right to transmit...
14623 # \E[203;1u set shift left to transmit...
14625 # \E[204;1u set shift home to transmit...
14627 # \E[212;1u set backtab to transmit...
14629 # \E[213;1u set shift backspace to transmit...
14631 # \E[214;1u set shift del to transmit...
14633 # [Necessary items not mentioned in setup mode:]
14634 # \E[2!w move to window 2
14635 # \E[25;25w define window as line 25 of memory
14636 # \E[!w move to window 1
14637 # \E[2*w show current line of window 2 as
14639 # \E[2+x set meta key to use high bit
14640 # \E[;3+} move underline to bottom of character
14642 # All Fkeys are set to their default transmit definitions with \E[90;3u
14643 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
14644 # setting MUST be redefined or deactivated, because the default is
14645 # contained in almost all of this terminal's Fkey strings! If for some
14646 # reason "quit" cannot be altered, the Fkeys can, but it would be
14647 # necessary to change ^| to ^] in all of these definitions, and add
14648 # \E[2;029!t to is2.
14649 # lines: is set to 24 because this terminal refuses to treat the 25th
14651 # ll: Not available in power on mode, but turned on with \E[=107;207h in
14653 # lm: Pointless, given that this definition locks a single screen of
14654 # memory into view, but what the hey...
14655 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
14656 # other attributes alone), but some programs expect this to turn off
14658 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
14659 # attributes alone), but some programs expect this to turn off
14661 # sgr: Attributes are set on this terminal with the string \E[ followed by
14662 # a list of attribute code numbers (in decimal, separated by
14663 # semicolons), followed by the character m. The attribute code
14666 # 2 for dim (which is ignored in power on mode);
14670 # 8 for not displayable; and
14671 # =99 for protected (except that there are strange side
14672 # effects to protected characters which make them inadvisable).
14673 # The mapping of terminfo parameters to attributes is as follows:
14674 # %p1 (standout) = bold and inverse together;
14675 # %p2 (underline) = underline;
14676 # %p3 (reverse) = inverse;
14677 # %p4 (blink) = blinking;
14678 # %p5 (dim) is ignored;
14679 # %p6 (bold) = bold;
14680 # %p7 (invisible) = not displayable;
14681 # %p8 (protected) is ignored; and
14682 # %p9 (alt char set) = alt char set.
14683 # The code to do this is:
14685 # %?%p1%p6%O IF (standout; bold) OR
14686 # %t;1 THEN OUTPUT ;1
14688 # %?%p2 IF underline
14689 # %t;4 THEN OUTPUT ;4
14692 # %t;5 THEN OUTPUT ;5
14694 # %?%p1%p3%O IF (standout; reverse) OR
14695 # %t;7 THEN OUTPUT ;7
14697 # %?%p7 IF invisible
14698 # %t;8 THEN OUTPUT ;8
14701 # %?%p9 IF altcharset
14702 # %t^N THEN OUTPUT ^N
14703 # %e^O ELSE OUTPUT ^O
14705 # sgr0: Everything is turned off (including alternate character set), since
14706 # there is no way of knowing what it is that the program wants turned
14708 # smul: The "underline" attribute is reconfigurable to an overline or
14709 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
14710 # bottom of the character cell. This was done to allow for more readable
14711 # underlined characters, and to be able to distinguish between an
14712 # underlined space, an underscore, and an underlined underscore.
14713 # xenl: Terminal can be configured to not need this, but this "glitch"
14714 # behavior is actually preferable with autowrap terminals.
14716 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
14717 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
14718 # string modifies the 'O' in kf43 to kf46 to a '$'.
14720 # kcbt was originally ^I but redefined in is2=.
14721 # kHOM was \E[H originally but redefined in is2=, as were a number of
14723 # kDC was originally \177 but redefined in is2=.
14725 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
14726 # tsl: Go to window 2, then do an hpa=.
14728 #------- flash=\E[8;3!}^G\E[3;3!}
14729 #------- flash=\E[?5h$<100>\E[?5l
14730 # There are two ways to flash the screen, both of which have their drawbacks.
14731 # The first is to set the bell mode to video, transmit a bell character, and
14732 # set the bell mode back - but to what? There is no way of knowing what the
14733 # user's old bell setting was before we messed with it. Worse, the command to
14734 # set the bell mode also sets the key click volume, and there is no way to say
14735 # "leave that alone", or to know what it's set to, either.
14736 # The second way to do a flash is to set the screen to inverse video, pad for a
14737 # tenth of a second, and set it back - but like before, there's no way to know
14738 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
14739 # it that way. The point is moot anyway, since vi (and probably other
14740 # programs) assume that by defining flash=, you want the computer to use it
14741 # INSTEAD of bel=, rather than as a secondary type of signal.
14743 #------- cvvis=\E[+{
14744 # The is the power on setting, which is also as visible as the cursor
14746 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
14747 # Windowing is possible, but not defined here because it is also used to
14748 # emulate status line functions. Allowing a program to set a window could
14749 # clobber the status line or render it unusable. There is additional memory,
14750 # but screen scroll functions are destructive and do not make use of it.
14752 #------- dim= Not available in power on mode.
14753 # You have a choice of defining low intensity characters as "half bright" and
14754 # high intensity as "normal", or defining low as "normal" and high as "bold".
14755 # No matter which you choose, only one of either "half bright" or "bold" is
14756 # available at any time, so taking the time to override the default is
14759 #------- prot=\E[=0;99m
14760 # Not defined, because it appears to have some strange side effects.
14761 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14762 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14763 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
14764 # Available, but making them available to programs is inadvisable.
14765 # The code to do this is:
14766 # %?%p1%{24}%< IF ((key; 24) <;
14767 # %p1%{30}%> ((key; 30) >;
14768 # %p1%{54}%< (key; 54) <
14771 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
14772 # %t\E[ THEN OUTPUT \E[
14773 # %p1%d OUTPUT (key) as decimal
14774 # [next line applies to pfx only]
14778 # %p2%s OUTPUT (string) as string
14780 # [DEL chosen as delimiter, but could be any character]
14781 # [implied: ELSE do nothing]
14785 # Not defined since anything it might do could be done faster and easier with
14786 # either Meta-Shift-Reset or the main power switch.
14788 #------- smkx=\E[1!z
14789 #------- rmkx=\E[!z
14790 # These sequences apply to the cursor and setup keys only, not to the
14791 # numeric keypad. But it doesn't matter anyway, since making these
14792 # available to programs is inadvisable.
14793 # For the key definitions below, all sequences beginning with \E$ are
14794 # custom and programmed into the terminal via is2. \E$ also has no
14795 # meaning to any other terminal.
14797 #------- cmdch=\E[;%p1%d!t
14798 # Available, but making it available to programs is inadvisable.
14799 #------- smxon=\E[1*q
14800 # Available, but making it available to programs is inadvisable.
14801 # Terminal will send XON/XOFF on buffer overflow.
14802 #------- rmxon=\E[*q
14803 # Available, but making it available to programs is inadvisable.
14804 # Terminal will not notify on buffer overflow.
14805 #------- smm=\E[2+x
14807 # Available, but making them available to programs is inadvisable.
14810 # It's not made clear in the manuals, but based on other ansi/vt type
14811 # terminals, it's a good guess that this terminal is capable of both
14812 # "transparent print" (which doesn't copy data to the screen, and
14813 # therefore needs mc5i: specified to say so) and "auxiliary print"
14814 # (which does duplicate printed data on the screen, in which case mc4=
14815 # and mc5= should use the \E[?4i and \E[?5i strings instead).
14817 hds200|Human Designed Systems HDS200,
14818 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
14819 cols#80, it#8, lines#24, lm#0,
14820 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14821 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
14822 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
14823 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14824 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14825 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14826 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14827 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
14828 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
14829 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14831 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
14832 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
14833 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
14834 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
14835 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
14836 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
14837 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
14838 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14839 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
14840 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
14841 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
14842 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
14843 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
14844 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
14845 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
14846 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
14847 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
14848 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
14849 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
14850 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
14851 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
14852 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
14853 rmul=\E[m\017, sc=\E7,
14854 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
14855 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14856 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
14857 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
14858 vpa=\E[%i%p1%dd, use=ansi+pp,
14860 # <ht> through <el> included to specify padding needed in raw mode.
14861 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
14862 avt-ns|concept avt no status line,
14863 OTbs, am, eo, mir, ul, xenl, xon,
14864 cols#80, it#8, lines#24, lm#192,
14865 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14866 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
14867 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14868 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14869 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14870 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
14871 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
14872 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
14873 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
14874 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
14875 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
14876 \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
14878 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14879 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14880 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
14881 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
14882 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
14883 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
14884 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
14885 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
14887 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14888 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
14890 sgr0=\E[m\016$<1>, smacs=\017$<1>,
14891 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
14892 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14893 vpa=\E[%p1%{1}%+%dd,
14894 avt-rv-ns|concept avt in reverse video mode/no status line,
14895 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14897 avt-w-ns|concept avt in 132 column mode/no status line,
14898 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14900 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
14901 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14902 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
14904 # Concept AVT with status line. We get the status line using the
14905 # "Background status line" feature of the terminal. We swipe the
14906 # first line of memory in window 2 for the status line, keeping
14907 # 191 lines of memory and 24 screen lines for regular use.
14908 # The first line is used instead of the last so that this works
14909 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
14910 # assumes an 8 page AVT but lm isn't currently used anywhere.)
14912 avt+s|concept avt status line changes,
14915 dsl=\E[0*w, fsl=\E[1;1!w,
14916 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
14917 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
14918 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
14919 avt|avt-s|concept-avt|avt w/80 columns,
14920 use=avt+s, use=avt-ns,
14921 avt-rv|avt-rv-s|avt reverse video w/sl,
14922 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14923 use=avt+s, use=avt-ns,
14924 avt-w|avt-w-s|concept avt 132 cols+status,
14925 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14926 use=avt+s, use=avt-ns,
14927 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
14928 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14929 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
14931 #### Contel Business Systems.
14934 # Contel c300 and c320 terminals.
14935 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
14937 cols#80, lines#24, xmc#1,
14938 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
14939 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
14940 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
14941 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
14942 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
14943 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
14944 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
14945 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
14946 # Contel c301 and c321 terminals.
14947 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
14948 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
14951 #### Data General (dg)
14953 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
14954 # the terminals group at Data General was shut down in 1991; all these
14955 # terminals have thus been discontinued.
14957 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
14958 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
14959 # sequentially, first the unmodified key codes are listed as F1 through F15.
14960 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
14961 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
14962 # F46 through F60. This is done in the private "includes" below whose names
14963 # start with "dgkeys+".
14965 # DG terminals generally support 8 bit characters. For each of these terminals
14966 # two descriptions are supplied:
14967 # 1) A default description for 8 bits/character communications, which
14968 # uses the default DG international character set and keyboard codes.
14969 # 2) A description with suffix "-7b" for 7 bits/character communications.
14970 # This description must use the NON-DEFAULT native keyboard language.
14972 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
14973 # Ctrl/Shift fdkeys (kf34-kf44).
14975 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
14976 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
14977 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
14978 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
14979 kf11=\233011z, kf12=\233012z, kf13=\233013z,
14980 kf14=\233014z, kf15=\233000z, kf16=\233101z,
14981 kf17=\233102z, kf18=\233103z, kf19=\233104z,
14982 kf2=\233002z, kf20=\233105z, kf21=\233106z,
14983 kf22=\233107z, kf23=\233108z, kf24=\233109z,
14984 kf25=\233110z, kf26=\233111z, kf27=\233112z,
14985 kf28=\233113z, kf29=\233114z, kf3=\233003z,
14986 kf30=\233100z, kf31=\233201z, kf32=\233202z,
14987 kf33=\233203z, kf34=\233204z, kf35=\233205z,
14988 kf36=\233206z, kf37=\233207z, kf38=\233208z,
14989 kf39=\233209z, kf4=\233004z, kf40=\233210z,
14990 kf41=\233211z, kf42=\233212z, kf43=\233213z,
14991 kf44=\233214z, kf45=\233200z, kf46=\233301z,
14992 kf47=\233302z, kf48=\233303z, kf49=\233304z,
14993 kf5=\233005z, kf50=\233305z, kf51=\233306z,
14994 kf52=\233307z, kf53=\233308z, kf54=\233309z,
14995 kf55=\233310z, kf56=\233311z, kf57=\233312z,
14996 kf58=\233313z, kf59=\233314z, kf6=\233006z,
14997 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
14998 khome=\233H, kprt=\233i,
15000 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
15001 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
15002 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15003 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
15004 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
15005 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
15006 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
15007 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
15008 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
15009 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
15010 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
15011 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
15012 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
15013 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
15014 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
15015 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
15016 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
15017 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
15018 kf9=\E[009z, khome=\E[H, kprt=\E[i,
15020 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
15021 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
15022 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
15023 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
15024 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
15025 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
15026 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
15027 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
15028 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
15029 kf8=^^x, kf9=^^y, khome=^H,
15031 dgkeys+15|Private entry describing 15 DG mode special keys,
15032 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
15033 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
15034 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
15035 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
15036 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
15037 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
15038 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
15039 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
15040 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
15041 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
15042 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
15045 # Data General color terminals use the "Tektronix" color model. The total
15046 # number of colors varies with the terminal model, as does support for
15047 # attributes used in conjunction with color.
15049 # Removed u7, u8 definitions since they conflict with tack:
15050 # Preserve user-defined colors in at least some cases.
15052 # Default is ACM mode.
15053 # u8=^^F}20^^Fi^^F}21,
15055 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
15057 colors#16, ncv#53, pairs#0x100,
15059 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15060 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15061 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15062 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15063 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15065 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
15068 # Video attributes are coordinated using static variables set by "sgr", then
15069 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
15070 # (D=dim, U=underline, B=blink, R=reverse.)
15071 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
15073 colors#8, ncv#16, pairs#64,
15074 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
15075 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15076 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15077 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15078 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15079 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15080 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15082 dg+color|Color info for Data General D470C terminals in ANSI mode,
15083 colors#16, ncv#53, pairs#0x100,
15084 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15085 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15087 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15088 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15090 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15091 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15093 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15094 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15098 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
15100 colors#8, ncv#16, pairs#64,
15102 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15104 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15106 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15108 dgmode+color|Color info for Data General D470C terminals in DG mode,
15109 colors#16, pairs#0x100,
15110 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15111 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15112 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15113 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15116 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
15118 colors#52, ncv#53, pairs#26,
15119 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
15120 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
15121 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
15123 oc=\036RG01A00FF00000000\036RG01B00000000FF00
15124 \036RG01C007F00000000\036RG01D000000007F00,
15125 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
15126 scp=\036RG2%p1%02X,
15128 # Colors are in the order: normal, reverse, dim, dim + reverse.
15129 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
15131 colors#52, ncv#53, pairs#26,
15132 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
15133 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
15134 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
15135 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
15136 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
15137 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
15138 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
15139 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
15140 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
15141 0000000\036RG01=000000007?00,
15142 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
15143 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
15145 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
15146 # Initialization string 1 sets:
15147 # ^R - vertical scrolling enabled
15148 # ^C - blinking enabled
15149 dg-generic|Generic Data General terminal in DG mode,
15152 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15153 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
15154 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
15155 smul=^T, use=dgkeys+11,
15157 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
15158 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
15159 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
15160 # maybe they were originally nuls (which would fit).
15162 dg200|data general dasher 200,
15165 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15166 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
15167 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
15168 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
15169 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
15172 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
15173 dg210|dg-ansi|Data General 210/211,
15176 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
15177 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15178 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15179 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
15180 smso=\E[7;m, smul=\E[4;m,
15181 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
15182 # courtesy of Carlos Rucalde of Vantage Software, Inc.
15183 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
15184 # I suspect the d200 function keys actually work on the dg211, check it out.)
15185 dg211|Data General d211,
15186 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
15187 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
15188 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
15190 # dg450 from Cornell (not official)
15191 dg450|dg6134|data general 6134,
15192 cub1@, cuf1=^X, use=dg200,
15195 # Note: lesser Dasher terminals will not work with vi because vi insists upon
15196 # having a command to move straight down from any position on the bottom line
15197 # and scroll the screen up, or a direct vertical scroll command. The 460 and
15198 # above have both, the D210/211, for instance, has neither. We must use ANSI
15199 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
15200 # backspace on all terminals. This is not so in DG mode.
15201 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
15202 # grounds that there is no matching ":ml:"
15203 dg460-ansi|Data General Dasher 460 in ANSI-mode,
15204 OTbs, am, msgr, ul,
15205 cols#80, it#8, lines#24,
15206 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
15207 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
15208 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15209 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
15210 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15211 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
15212 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
15213 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
15214 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
15215 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
15216 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
15218 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
15219 u7=\E[6n, u8=\E[5n, u9=\E[0n,
15220 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
15221 # Data General 605x
15222 # Ought to work for a Model 6242, Type D210 as well as a 605x.
15223 # Note that the cursor-down key transmits ^Z. Job control users, beware!
15224 # This also matches a posted description of something called a `Dasher 100'
15225 # so there's a dg100 alias here.
15226 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
15227 dg6053-old|dg100|data general 6053,
15230 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
15231 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
15232 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
15233 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
15234 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
15235 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
15238 # (Some performance can be gained over the generic DG terminal type)
15239 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
15241 home=\020\0\0, ll=^P\0^W, use=dg-generic,
15243 # Like 6053, but adds reverse video and more keypad and function keys.
15244 d200|d200-dg|Data General DASHER D200,
15245 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
15246 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15247 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
15248 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
15250 # DASHER D210 series terminals in ANSI mode.
15251 # Reverse video, no insert/delete character/line, 7 bits/character only.
15253 # Initialization string 1 sets:
15254 # <0 - scrolling enabled
15255 # <1 - blink enabled
15256 # <4 - print characters regardless of attributes
15257 d210|d214|Data General DASHER D210 series,
15260 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
15261 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
15262 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15263 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
15264 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
15265 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
15266 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
15268 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
15270 # DASHER D210 series terminals in DG mode.
15271 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
15272 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
15274 ed=^^FF, use=d200-dg,
15276 # DASHER D211 series terminals in ANSI mode.
15277 # Like the D210, but with 8-bit characters and local printer support.
15279 # Initialization string 2 sets:
15281 # 2;1 - 8 bit operations
15282 # 1;1 - 8 bit (international) keyboard language
15283 # \E(B - default primary character set (U.S. ASCII)
15284 # \E)4 - default secondary character set (international)
15285 # ^O - primary character set
15287 d211|d215|Data General DASHER D211 series,
15289 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
15292 # Initialization string 2 sets:
15294 # 2;0 - 7 bit operations
15295 # 1;0 - 7 bit (native) keyboard language
15296 # \E(0 - default character set (the keyboard native language)
15297 # ^O - primary character set
15298 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
15300 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
15302 # Like the D210 series, but adds support for 8-bit characters.
15304 # Reset string 2 sets:
15305 # ^^N - secondary character set
15306 # ^^FS0> - 8 bit international character set
15307 # ^^O - primary character set
15308 # ^^FS00 - default character set (matching the native keyboard language)
15310 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
15312 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
15314 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
15317 # Enhanced DG mode with changes to be more UNIX compatible.
15318 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
15321 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
15322 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
15323 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
15324 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
15325 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
15326 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
15327 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
15328 rs2=\036N\036FS0E\036O\036FS00,
15329 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
15330 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
15332 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
15333 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
15334 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
15336 is3=^^Fz2, use=d216+,
15338 d217-unix|Data General DASHER D217 in DG-UNIX mode,
15340 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
15343 # DASHER D220 color terminal in ANSI mode.
15344 # Like the D470C but with fewer colors and screen editing features.
15346 # Initialization string 1 sets:
15348 # <0 - scrolling enabled
15349 # <1 - blink enabled
15350 # <4 - print characters regardless of attributes
15351 # \E[m - all attributes off
15352 # Reset string 1 sets:
15353 # \Ec - initial mode defaults (RIS)
15355 d220|Data General DASHER D220,
15357 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15358 use=dg+color8, use=d470c,
15360 d220-7b|Data General DASHER D220 in 7 bit mode,
15362 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15363 use=dg+color8, use=d470c-7b,
15365 # Initialization string 3 sets:
15366 # - default cursor (solid rectangle)
15367 # Reset string 2 sets:
15368 # ^^N - secondary character set
15369 # ^^FS0> - 8 bit international character set
15370 # ^^O - primary character set
15371 # ^^FS00 - default character set (matching the native keyboard language)
15373 d220-dg|Data General DASHER D220 color terminal in DG mode,
15375 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
15376 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
15379 # DASHER D230C color terminal in ANSI mode.
15380 # Like the D220 but with minor ANSI compatibility improvements.
15382 d230c|d230|Data General DASHER D230C,
15383 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
15384 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
15385 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e
15386 %{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}
15387 %e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
15388 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
15389 smul=\E[4;50m, use=dgkeys+7b, use=d220,
15391 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
15394 # DASHER D400/D450 series terminals.
15395 # These add intelligent features like insert/delete to the D200 series.
15397 # Initialization string 2 sets:
15398 # ^^FQ2 - default cursor (solid rectangle)
15399 # ^^FW - character protection disabled
15400 # ^^FJ - normal (80 column) mode
15401 # ^^F\^ - horizontal scrolling enabled (for alignment)
15402 # ^^FX004? - margins at columns 0 and 79
15403 # ^^F] - horizontal scrolling disabled
15404 # ^^O - primary character set
15405 # ^^FS00 - default character set (the keyboard native language)
15406 # - (should reset scrolling regions, but that glitches the screen)
15407 # Reset string 1 sets:
15408 # ^^FA - all terminal defaults except scroll rate
15409 # Reset string 2 sets:
15410 # ^^F] - horizontal scrolling disabled
15411 # ^^FT0 - jump scrolling
15413 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
15415 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
15416 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
15417 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
15418 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
15420 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
15422 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15423 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
15424 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
15427 # DASHER D410/D460 series terminals in ANSI mode.
15428 # These add a large number of intelligent terminal features.
15430 # Initialization string 1 sets:
15432 # <0 - scrolling enabled
15433 # <1 - blink enabled
15434 # <2 - horizontal scrolling enabled (for alignment)
15435 # <4 - print characters regardless of attributes
15436 # \E[5;0v - normal (80 column) mode
15437 # \E[1;1;80w - margins at columns 1 and 80
15439 # 1 - print all characters even if protected
15440 # 6 - character protection disabled
15441 # <2 - horizontal scrolling disabled
15442 # - (should reset scrolling regions, but that glitches the screen)
15444 # Initialization string 2 sets:
15446 # 3;2 - default cursor (solid rectangle)
15447 # 2;1 - 8 bit operations
15448 # 1;1 - international keyboard language
15449 # \E(B - default primary character set (U.S. ASCII)
15450 # \E)4 - default secondary character set (international)
15451 # ^O - primary character set
15453 # Reset string 1 sets:
15454 # \Ec - initial mode defaults (RIS)
15455 # \E[<2h - horizontal scrolling disabled
15457 # Reset string 2 sets:
15459 # 4;0 - jump scrolling
15460 # 2;1 - 8 bit operations
15461 # 1;1 - 8 bit (international) keyboard language
15462 # \E(B - default primary character set (U.S. ASCII)
15463 # \E)4 - default secondary character set (international)
15465 d410|d411|d460|d461|Data General DASHER D410/D460 series,
15467 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
15468 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15469 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
15470 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
15471 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
15472 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
15473 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
15474 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
15475 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
15476 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
15478 # Initialization string 2 sets:
15480 # 3;2 - default cursor (solid rectangle)
15481 # 2;0 - 7 bit operations
15482 # 1;0 - 7 bit (native) keyboard language
15483 # \E(0 - default character set (the keyboard native language)
15484 # ^O - primary character set
15486 # Reset string 2 sets:
15488 # 4;0 - jump scrolling
15489 # 2;0 - 7 bit operations
15490 # 1;0 - 7 bit (native) keyboard language
15491 # \E(0 - default character set (the keyboard native language)
15493 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
15495 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
15496 rs2=\E[4;0;2;0;1;0v\E(0,
15497 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
15498 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
15499 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
15501 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
15503 enacs@, rmacs=\036FS00,
15504 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15505 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
15507 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
15510 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
15512 # Initialization string 1 sets:
15514 # <0 - scrolling enabled
15515 # <1 - blink enabled
15516 # <2 - horizontal scrolling enabled (for alignment)
15517 # <4 - print characters regardless of attributes
15518 # \E[5;1v - compressed (135 column) mode
15519 # \E[1;1;126 - margins at columns 1 and 126
15521 # 1 - print all characters even if protected
15522 # 6 - character protection disabled
15523 # <2 - horizontal scrolling disabled
15524 # - (should reset scrolling regions, but that glitches the screen)
15526 # Reset string 1 sets:
15527 # \Ec - initial mode defaults (RIS)
15528 # \E[5;1v - compressed (135 column) mode
15529 # \E[1;1;126w - margins at columns 1 and 126
15530 # \E[<2h - horizontal scrolling disabled
15532 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
15534 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15535 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
15537 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
15539 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15540 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
15542 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
15545 # These add intelligent features like scrolling regions.
15546 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
15547 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
15548 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
15549 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
15550 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
15552 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
15553 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
15554 vpa=\036FPFF%p1%2.2X,
15555 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15556 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15558 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
15560 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
15562 rs2=\036P@1\036FK\036FX0083,
15563 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
15564 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
15566 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
15569 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
15570 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15572 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
15574 clear=\036FG\036PH, fsl=\036F}01\022,
15575 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
15576 tsl=\036F}00\036FP%p1%2.2X18\036PG,
15577 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15578 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
15581 # Relative cursor motions are confined to the current window,
15582 # which is not what the scrolling region specification expects.
15583 # Thus, relative vertical cursor positioning must be deleted.
15584 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
15585 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
15587 cud1@, cuu1@, ll@, use=d462+,
15589 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
15591 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
15593 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
15595 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
15597 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
15600 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
15602 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
15604 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
15606 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
15608 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
15611 d430c-dg|d430-dg|Data General D430C in DG mode,
15612 use=d413-dg, use=dg+fixed,
15613 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
15614 use=d413-dg, use=dg+ccc,
15616 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
15617 use=d413-unix, use=dgunix+fixed,
15618 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
15619 use=d413-unix-w, use=dgunix+fixed,
15620 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
15621 use=d413-unix-25, use=dgunix+fixed,
15622 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
15623 use=d413-unix-s, use=dgunix+fixed,
15624 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
15625 use=d413-unix-sr, use=dgunix+fixed,
15626 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
15627 use=d413-unix, use=dgunix+ccc,
15628 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
15629 use=d413-unix-w, use=dgunix+ccc,
15630 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
15631 use=d413-unix-25, use=dgunix+ccc,
15632 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
15633 use=d413-unix-s, use=dgunix+ccc,
15634 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
15635 use=d413-unix-sr, use=dgunix+ccc,
15637 # DASHER D470C color terminal in ANSI mode.
15638 # Like the D460 but with 16 colors and without a compressed mode.
15640 # Initialization string 1 sets:
15642 # <0 - scrolling enabled
15643 # <1 - blink enabled
15644 # <2 - horizontal scrolling enabled (for alignment)
15645 # <4 - print characters regardless of attributes
15646 # \E[1;1;80w - margins at columns 1 and 80
15648 # 1 - print all characters even if protected
15649 # 6 - character protection disabled
15650 # <2 - horizontal scrolling disabled
15651 # - (should reset scrolling regions, but that glitches the screen)
15653 d470c|d470|Data General DASHER D470C,
15654 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15655 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15656 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
15657 use=dg+color, use=d460,
15659 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
15660 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15661 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15662 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
15663 use=dg+color, use=d460-7b,
15665 # Initialization string 2 sets:
15666 # ^^FQ2 - default cursor (solid rectangle)
15667 # ^^FW - character protection disabled
15668 # ^^F\^ - horizontal scrolling enabled (for alignment)
15669 # ^^FX004? - margins at columns 0 and 79
15670 # ^^F] - horizontal scrolling disabled
15671 # ^^O - primary character set
15672 # ^^FS00 - default character set (the keyboard native language)
15673 # - (should reset scrolling regions, but that glitches the screen)
15675 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
15676 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
15678 use=dgmode+color, use=d460-dg,
15680 # DASHER D555 terminal in ANSI mode.
15681 # Like a D411, but has an integrated phone.
15682 d555|Data General DASHER D555,
15684 d555-7b|Data General DASHER D555 in 7-bit mode,
15686 d555-w|Data General DASHER D555 in wide mode,
15688 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
15690 d555-dg|Data General DASHER D555 series in DG mode,
15693 # DASHER D577 terminal in ANSI mode.
15694 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
15695 d577|Data General DASHER D577,
15697 d577-7b|Data General DASHER D577 in 7-bit mode,
15699 d577-w|Data General DASHER D577 in wide mode,
15701 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
15704 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
15707 # DASHER D578 terminal.
15708 # Like a D577, but without compressed mode; like a D470C in this respect.
15710 # Initialization string 1 sets:
15712 # <0 - scrolling enabled
15713 # <1 - blink enabled
15714 # <2 - horizontal scrolling enabled (for alignment)
15715 # <4 - print characters regardless of attributes
15716 # \E[1;1;80w - margins at columns 1 and 80
15718 # 1 - print all characters even if protected
15719 # 6 - character protection disabled
15720 # <2 - horizontal scrolling disabled
15721 # - (should reset scrolling regions, but that glitches the screen)
15723 d578|Data General DASHER D578,
15724 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
15725 d578-7b|Data General DASHER D578 in 7-bit mode,
15726 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
15728 #### Datamedia (dm)
15730 # Datamedia was headquartered in Nashua, New Hampshire until it went
15731 # out of business in 1993, but the ID plates on the terminals referred
15732 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
15733 # manufacturer which threw out all information about the terminals.
15736 cs10|colorscan|Datamedia Color Scan 10,
15739 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
15740 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15741 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15742 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
15743 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15744 cs10-w|Datamedia Color Scan 10 with 132 columns,
15746 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
15748 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
15749 dm1520|dm1521|datamedia 1520,
15751 cols#80, it#8, lines#24,
15752 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
15753 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
15754 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
15756 # dm2500: this terminal has both <ich> and <smir>. Applications using
15757 # termcap/terminfo directly (rather than through ncurses) might be confused.
15758 dm2500|datamedia2500|datamedia 2500,
15761 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
15762 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
15763 dch1=\020\010\030\035$<10*>,
15764 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
15765 ich1=\020\034\030\035$<10*>,
15766 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
15767 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
15768 smdc=^P, smir=^P, smso=^N,
15769 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
15770 # also, has a meta-key.
15771 # From: <goldberger@su-csli.arpa>
15772 # (dmchat: ":MT:" changed to ":km:" -- esr)
15773 dmchat|dmchat version of datamedia 2500,
15775 dl1=\020\032\030\035$<2/>,
15776 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
15777 # (dm3025: ":MT:" changed to ":km:" -- esr)
15778 dm3025|datamedia 3025a,
15780 cols#80, it#8, lines#24,
15781 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15782 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
15783 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
15784 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
15785 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
15786 smir=\EP, smso=\EO1,
15787 dm3045|datamedia 3045a,
15788 OTbs, am, eo, km@, ul, xenl,
15789 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
15790 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
15791 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
15792 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
15794 # Datamedia DT80 soft switches:
15795 # 1 0=Jump 1=Smooth
15796 # Autorepeat 0=off 1=on
15797 # Screen 0=Dark 1=light
15798 # Cursor 0=u/l 1=block
15800 # 2 Margin Bell 0=off 1=on
15801 # Keyclick 0=off 1=on
15802 # ANSI/VT52 0=VT52 1=ANSI
15803 # Xon/Xoff 0=Off 1=On
15805 # 3 Shift3 0=Hash 1=UK Pound
15807 # Newline 0=Off 1=On
15808 # Interlace 0=Off 1=On
15810 # 4 Parity 0=Odd 1=Even
15811 # Parity 0=Off 1=On
15812 # Bits/Char 0=7 1=8
15813 # Power 0=60Hz 1=50Hz
15815 # 5 Line Interface 0=EIA 1=Loop
15816 # Aux Interface 0=EIA 1=Loop
15817 # Local Copy 0=Off 1=On
15820 # 6 Aux Parity 0=Odd 1=Even
15821 # Aux Parity 0=Off 1=On
15822 # Aux Bits/Char 0=7 1=8
15823 # CRT Saver 0=Off 1=On
15824 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
15825 dm80|dmdt80|dt80|datamedia dt80/1,
15826 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
15827 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15828 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
15829 rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
15830 smul=\E[4m, use=vt100+4bsd,
15831 # except in 132 column mode, where it needs a little padding.
15832 # This is still less padding than the vt100, and you can always turn on
15833 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
15835 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
15837 clear=\E[H\E[2J$<50/>, cud1=\n,
15838 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
15839 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
15840 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
15841 dt80-sas|Datamedia DT803/DTX for SAS usage,
15844 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
15845 bel=^G, clear=^L, cr=\r,
15846 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
15847 cub1=^H, cud1=\EB, cuf1=^\,
15848 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
15849 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
15850 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
15851 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
15852 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
15853 smso=\E$2\004, tbc=\E'0,
15855 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
15856 # These aren't end-all Excel termcaps; but do insert/delete char/line
15857 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
15858 # The naming convention has been bent somewhat, with the use of E? (where
15859 # E is for 'Excel') as # a name. This was done to distinguish the entries
15860 # from the other Datamedias in use here, and yet to associate a model of
15861 # the Excel terminals with the regular datamedia terminals that share
15862 # major characteristics.
15863 excel62|excel64|datamedia Excel 62,
15864 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15865 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15867 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
15868 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15869 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15871 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
15872 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
15873 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
15874 smir=\E[4h, use=dt80,
15878 # Falco Data Products
15879 # 440 Potrero Avenue
15880 # Sunnyvale, CA 940864-196
15881 # Vox: (800)-325-2648
15882 # Fax: (408)-745-7860
15883 # Net: techsup@charm.sys.falco.com
15885 # Current Falco models as of 1995 are generally ANSI-compatible and support
15886 # emulations of DEC VT-series, Wyse, and Televideo types.
15889 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
15890 # This terminal was released around 1983 and was discontinued long ago.
15891 # The standout and underline highlights are the same.
15892 falco|ts1|ts-1|falco ts-1,
15894 cols#80, it#8, lines#24,
15895 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15896 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15897 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
15898 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
15899 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
15900 smir=\Eq, smso=\Eg1, smul=\Eg1,
15901 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
15902 OTbs, am, da, db, mir, msgr, ul,
15903 cols#80, it#8, lines#24,
15904 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
15905 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
15906 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
15907 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
15908 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
15909 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
15910 smso=\Eg4, smul=\Eg1,
15911 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
15912 ts100|ts100-sp|falco ts100-sp,
15913 am, mir, msgr, xenl, xon,
15914 cols#80, it#8, lines#24, vt#3,
15915 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15916 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15917 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15918 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
15919 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15920 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15921 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
15922 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
15923 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
15924 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15925 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15926 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15927 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15928 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
15929 %;m%?%p9%t\016%e\017%;$<2>,
15930 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15931 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15933 ts100-ctxt|falco ts-100 saving context,
15934 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
15936 #### Florida Computer Graphics
15939 # Florida Computer Graphics Beacon System, using terminal emulator program
15940 # "host.com", as provided by FCG. This description is for an early release
15941 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
15944 # From: David Bryant <cbosg!djb> 1/7/83
15945 beacon|FCG Beacon System,
15948 bel=\ESTART\r\E37\r\EEND\r$<1>,
15949 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
15950 cub1=^H, cud1=\n, cuf1=\EV,
15951 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
15952 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
15953 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
15954 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
15955 rmul=\ESTART\r\E60\,0\r\EEND\r,
15956 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
15957 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
15958 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
15959 smul=\ESTART\r\E60\,1\r\EEND\r,
15964 # The f1720a differences from ANSI: no auto margin, destructive
15965 # tabs, # of lines, funny highlighting and underlining
15966 f1720|f1720a|fluke 1720A,
15968 cols#80, lines#16, xmc#1,
15969 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
15970 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
15971 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
15972 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15973 smso=\E[7m, smul=\E[4m,
15975 #### Liberty Electronics (Freedom)
15977 # Liberty Electronics
15978 # 48089 Fremont Blvd
15980 # Vox: (510)-623-6000
15981 # Fax: (510)-623-7021
15983 # From: <faletti@berkeley.edu>
15984 # (f100: added empty <acsc> to suppress a tic warning;
15985 # made this relative to adm+sgr -- note that <invis> isn't
15986 # known to work for f100 but does on the f110. --esr)
15987 f100|freedom|freedom100|freedom model 100,
15988 OTbs, am, bw, hs, mir, msgr, xon,
15990 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
15991 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15992 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
15993 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
15994 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
15995 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
15996 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
15997 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15998 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
15999 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
16000 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16001 f100-rv|freedom-rv|freedom 100 in reverse video,
16002 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
16003 # The f110 and f200 have problems with vi(1). They use the ^V
16004 # code for the down cursor key. When kcud1 is defined in terminfo
16005 # as ^V, the Control Character Quoting capability (^V in insert mode)
16006 # is lost! It cannot be remapped in vi because it is necessary to enter
16007 # a ^V to to quote the ^V that is being remapped!!!
16009 # f110/f200 users will have to decide whether
16010 # to lose the down cursor key or the quoting capability. We will opt
16011 # initially for leaving the quoting capability out, since use of VI
16012 # is not generally applicable to most interactive applications
16013 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
16014 f110|freedom110|Liberty Freedom 110,
16017 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
16018 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
16019 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
16020 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16021 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
16022 smso=\EG<, tsl=\Ef, use=f100,
16023 f110-14|Liberty Freedom 110 14inch,
16025 f110-w|Liberty Freedom 110 - 132 cols,
16026 cols#132, use=f110,
16027 f110-14w|Liberty Freedom 110 14in/132 cols,
16030 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16031 f200|freedom200|Liberty Freedom 200,
16032 OTbs, am, eslok, hs, mir, msgr, xon,
16033 cols#80, it#8, lines#24, wsl#80,
16034 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
16035 clear=^Z, cnorm=\E.1, cr=\r,
16036 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
16037 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16038 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
16039 flash=\Eo$<200/>\En, fsl=\r, home=^^,
16040 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
16041 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
16042 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16043 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16044 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16045 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
16046 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16047 f200-w|Liberty Freedom 200 - 132 cols,
16048 cols#132, use=f200,
16049 # The f200 has the ability to reprogram the down cursor key. The key is
16050 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
16051 # so powering the terminal off and on will not cause the change to be lost.
16052 f200vi|Liberty Freedom 200 for vi,
16053 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
16054 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
16055 cols#132, use=f200vi,
16059 # Graphon Corporation
16060 # 544 Division Street
16061 # Campbell, CA 95008
16062 # Vox: (408)-370-4080
16063 # Fax: (408)-370-5047
16064 # Net: troy@graphon.com (Troy Morrison)
16067 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
16068 # including one odd hybrid that starts out life on power-up as a character
16069 # terminal, than can be switched to X graphics mode (driven over the serial
16070 # line) by an escape sequence. No info on this beast yet.
16071 # (go140: I added <rmam>/<smam> based on the init string -- esr)
16072 go140|graphon go-140,
16074 cols#80, it#8, lines#24,
16075 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
16076 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16077 ed=\E[J$<10/>, el=\E[K, ht=^I,
16078 if=/usr/share/tabset/vt100, il1=\E[L,
16079 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16080 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
16081 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
16082 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
16083 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
16084 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16085 go140w|graphon go-140 in 132 column mode,
16088 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16090 # Hacked up vt200 termcap to handle GO-225/VT220
16091 # From: <edm@nwnexus.WA.COM>
16092 # (go225: I added <rmam>/<smam> based on the init string -- esr)
16093 go225|go-225|Graphon 225,
16094 OTbs, am, mir, xenl,
16095 cols#80, it#8, lines#25, vt#3,
16096 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
16097 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
16098 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16099 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
16100 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
16101 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
16102 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
16103 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
16104 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
16105 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
16106 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
16107 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
16109 #### Harris (Beehive)
16111 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
16112 # Their terminal group is ancient history now (1995) though the parent
16113 # company is still in business.
16116 # Beehive documentation is undated and marked Preliminary and has no figures
16117 # so we must have early Superbee2 (Model 600, according to phone conversation
16118 # with mfr.). It has proved reliable except for some missing padding
16119 # (notably after \EK and <nl> at bottom of screen).
16121 # The key idea is that AEP mode is poison for <cup> & that US's in
16122 # the local memory should be avoided like the plague. That means
16123 # that the 2048 character local buffer is used as 25 lines of 80
16124 # characters, period. No scrolling local memory, folks. It also
16125 # appears that we cannot use naked INS LINE feature since it uses
16126 # US. The sbi fakes <il1> with an 80-space insert that may be too
16127 # slow at low speeds; also spaces get converted to \040 which is
16128 # too long for some programs (not vi). DEL LINE is ok but slow.
16130 # The <nl> string is designed for last line of screen ONLY; cup to
16131 # 25th line corrects the motion inherent in scrolling to Page 1.
16133 # There is one understood bug. It is that the screen appears to
16134 # pop to a new (blank) page after a <nel>, or leave a half-line
16135 # ellipsis to a quad that is the extra 48 memory locations. The
16136 # data received is dumped into memory but not displayed. Not to
16137 # worry if <cup> is being used; the lines not displayed will be,
16138 # whenever the cursor is moved up there. Since <cup> is addressed
16139 # relative to MEMORY of window, nothing is lost; but beware of
16140 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
16141 # therefore, is setenv MORE -c .
16143 # WARNING: Not all features tested.
16145 # Timings are assembled from 3 sources. Some timings may reflect
16146 # SB2/Model 300 that were used if more conservative.
16147 # Tested on a Model 600 at 1200 and 9600 bd.
16149 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
16150 # placed on the keyboard and useless because of AEP, is made
16151 # into a backspace key. In use ESC must be pressed twice (to send)
16152 # and sending ^C must be prefixed by ESC to avoid that weird
16153 # transmit mode associated with ENTER key.
16155 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
16156 # the screen, then it has dropped into ENTER mode; hit
16157 # RESET--ONLINE--!tset.
16159 # As delivered this machine has a FATAL feature that will throw
16160 # it into that strange transmit state (SPOW) if the space bar is
16161 # hit after a CR is received, but before receiving a LF (or a
16164 # The circuits MUST be modified to eliminate the SPOW latch.
16165 # This is done by strapping on chip A46 of the I/O board; cut
16166 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
16167 # chip. This mod has been checked out on a Mod 600 of Superbee II.
16168 # With this modification absurdly high timings on cr are
16171 # NOTE WELL that the rear panel switch should be set to CR/LF,
16174 sb1|beehive superbee,
16175 OTbs, am, bw, da, db, mir, ul, xsb,
16176 cols#80, lines#25, xmc#1,
16177 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
16178 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
16179 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
16180 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
16181 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16182 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16183 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16184 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
16185 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
16186 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
16187 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
16188 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
16189 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
16190 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
16191 smso=\E_1, smul=\E_0, tbc=\E3,
16192 sbi|superbee|beehive superbee at Indiana U.,
16194 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
16196 # Alternate (older) description of Superbee - f1=escape, f2=^C.
16197 # Note: there are at least 3 kinds of superbees in the world. The sb1
16198 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
16199 # The sb3 puts garbage on the bottom of the screen when you scroll with
16200 # the switch in the back set to CRLF instead of AEP. This description
16201 # is tested on the sb2 but should work on all with either switch setting.
16202 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
16203 # the other two if you want to try to hit that tiny escape key.
16204 # This description is tricky: being able to use cup depends on there being
16205 # 2048 bytes of memory and the hairy <nl> string.
16206 superbee-xsb|beehive super bee,
16208 cols#80, it#8, lines#25,
16209 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
16210 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
16211 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
16212 home=\EH, ht=^I, hts=\E1,
16213 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
16214 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
16215 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
16216 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
16217 # This loses on lines > 80 chars long, use at your own risk
16218 superbeeic|super bee with insert char,
16219 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
16220 sb2|sb3|fixed superbee,
16221 xsb@, use=superbee,
16223 #### Beehive Medical Electronics
16225 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
16226 # Regarding your question though; Beehive terminals weren't made by Harris.
16227 # They were made by Beehive Medical Electronics in Utah. They went out of
16228 # business in the early '80s.
16230 # (OK, then, I don't know why a couple of these say "harris beehive".)
16233 # Reports are that most of these Beehive entries (except superbee) have not
16234 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
16236 # (bee: <ich1> was empty, which is obviously bogus -- esr)
16237 beehive|bee|harris beehive,
16240 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
16241 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
16242 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
16243 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16244 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
16245 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
16246 smir=\EQ, smso=\EdP, smul=\Ed`,
16247 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
16248 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
16249 # look at those spaces in <rmso>/<smso>. Seems strange to me...
16250 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
16251 # really care, cook up one using ^F -- esr)
16252 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
16254 cols#80, it#8, lines#20,
16255 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
16256 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
16257 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
16258 beehive4|bh4|beehive 4,
16261 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
16262 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
16263 # There was an early Australian kit-built computer called a "Microbee".
16264 # It's not clear whether this is for one of those or for a relative
16266 microb|microbee|micro bee series,
16268 cols#80, it#8, lines#24,
16269 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16270 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16271 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16272 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
16273 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
16274 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
16276 # 8675, 8686, and bee from Cyrus Rahman
16277 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
16278 ha8675|harris 8675,
16279 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
16280 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
16281 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
16283 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
16285 ha8686|harris 8686,
16286 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
16287 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
16288 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
16290 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
16291 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
16292 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
16293 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
16297 # Hazeltine appears to be out of the terminal business as of 1995. These
16298 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
16299 # Harris. They have a hazeltine.com domain (but no web page there ) and can
16303 # 450 East Pulaski Road
16304 # Greenlawn, New York 11740
16306 # As late as 1993, manuals for the terminal product line could still be
16309 # TRW Customer Service Division
16312 # Fairfield, NJ 07007-2078
16314 # They're now (1998) a subsidiary of General Electric, operating under the
16315 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
16316 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
16319 # Since <cuf1> is blank, when you want to erase something you
16320 # are out of luck. You will have to do ^L's a lot to
16321 # redraw the screen. h1000 is untested. It doesn't work in
16322 # vi - this terminal is too dumb for even vi. (The code is
16323 # there but it isn't debugged for this case.)
16324 hz1000|hazeltine 1000,
16327 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
16329 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
16330 hz1420|hazeltine 1420,
16333 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
16334 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
16335 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
16337 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
16338 # freakout with out-of-range args and tn3270. No hz since it needs to
16340 hz1500|hazeltine 1500,
16343 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16344 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
16345 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
16346 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
16347 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
16348 # h1510 assumed to be in sane escape mode. Else use h1500.
16349 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
16350 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
16351 # removed incorrect and overridden ":do=^J:" -- esr)
16352 hz1510|hazeltine 1510,
16355 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
16356 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
16357 el=\E^O, il1=\E^Z, ind=\n,
16359 # The following switch settings are assumed for normal operation:
16360 # FULL CR U/L_CASE ESCAPE
16361 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
16362 # Other switches may be set for operator convenience or communication
16364 hz1520|Hazeltine 1520,
16365 OTbs, am, bw, msgr,
16367 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
16368 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16369 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
16370 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
16371 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
16372 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
16373 # This version works with the escape switch off
16374 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
16375 hz1520-noesc|hazeltine 1520,
16378 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16379 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
16380 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
16381 # Note: the h1552 appears to be the first Hazeltine terminal which
16382 # is not braindamaged. It has tildes and backprimes and everything!
16383 # Be sure the auto lf/cr switch is set to cr.
16384 hz1552|hazeltine 1552,
16386 cud1=\n, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
16387 lf2=red, lf3=green, use=vt52,
16388 hz1552-rv|hazeltine 1552 reverse video,
16389 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
16390 # Note: h2000 won't work well because of a clash between upper case and ~'s.
16391 hz2000|hazeltine 2000,
16394 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
16395 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
16396 il1=~\032$<6>, ind=\n, pad=^?,
16397 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
16398 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
16399 # to work ok. There is one problem though if one types a lot of garbage
16400 # characters very fast vi seems not able to keep up and hangs while trying
16401 # to insert. That's in insert mode while trying to insert in the middle of
16402 # a line. It might be because the Esprit doesn't have insert char and delete
16403 # char as a built in function. Vi has to delete to end of line and then
16404 # redraw the rest of the line.
16405 esprit|Hazeltine Esprit I,
16408 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
16409 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16410 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
16411 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
16412 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
16413 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
16414 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
16415 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
16416 esprit-am|hazeltine esprit auto-margin,
16418 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
16419 # Vi it seems always wants to send a control J for "do" and it turned out
16420 # that the terminal would work somewhat if the auto LF/CR was turned off.
16421 # (hmod1: removed :dn=~^K: -- esr)
16422 hmod1|Hazeltine Modular 1,
16425 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16426 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
16427 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
16428 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
16430 # Hazeltine Executive 80 Model 30 (1554?)
16431 # from Will Martin <control@ALMSA-1.ARPA> via BRL
16432 # Like VT100, except for different "am" behavior.
16433 hazel|exec80|h80|he80|Hazeltine Executive 80,
16435 cols#80, it#8, lines#24, vt#3,
16436 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
16437 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
16438 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
16439 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
16440 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
16441 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
16442 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
16443 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
16444 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
16445 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
16446 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16447 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
16453 ibm327x|line mode IBM 3270 style,
16455 clear=\r\n, el=\r, home=\r,
16457 ibm3101|i3101|IBM 3101-10,
16460 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16461 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16462 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
16463 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
16464 ibm3151|IBM 3151 display,
16465 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
16466 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16467 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16468 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
16469 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
16470 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
16471 # removed kend, knp, kpp -TD
16473 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16474 # Added ich1 (kich1 without ich1 doesn't make sense).
16475 # Added il1 (kil1 without il1 doesn't make sense).
16476 # Added xon (terminal uses XON/XOFF flow control).
16478 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
16479 OTbs, am, mir, msgr, xon,
16480 cols#80, it#8, lines#24,
16481 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
16483 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
16484 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16485 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
16486 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
16487 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16488 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
16489 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
16490 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
16491 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
16492 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
16493 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
16494 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
16495 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
16496 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
16497 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16498 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16499 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
16500 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
16502 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
16503 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
16505 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16506 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
16509 ibm3162|IBM 3162 display,
16510 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
16511 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
16514 # This really should not use setab/setaf, but it is clear that the
16515 # original terminfo does not toggle red/blue colors as in setb/setf.
16516 ibm3164|i3164|IBM 3164,
16518 colors#8, pairs#64,
16519 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
16520 setab=\E4 %p1%{64}%+%c,
16521 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
16522 smcup=\E!9/N\E>B, use=ibm3161,
16524 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
16526 cols#80, it#8, lines#25,
16527 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16529 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16530 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16531 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16532 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16533 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
16534 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
16535 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
16536 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
16537 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
16538 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
16539 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
16540 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
16541 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
16542 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
16543 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
16544 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
16545 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
16546 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16547 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
16548 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
16549 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
16550 rmso=\E[m, rmul=\E[m, rs2=\Ec,
16551 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16553 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16555 ibmaed|IBM Experimental display,
16556 OTbs, am, eo, msgr,
16557 cols#80, it#8, lines#52,
16558 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
16559 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16560 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
16561 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16562 rmso=\E0, sgr0=\E0, smso=\E0,
16563 ibm-apl|apl|IBM apl terminal simulator,
16564 lines#25, use=dm1520,
16565 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
16566 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
16567 ibmmono|IBM workstation monochrome,
16569 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
16570 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
16571 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
16572 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
16573 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
16574 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
16576 ibmega|IBM Enhanced Color Display,
16577 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16578 nel=\r\n, use=ibmmono,
16579 # This color scheme is assumed in some recent IBM terminal descriptions
16580 # (green on black, emulated on a 16-color terminal).
16581 ibm+color|IBM color definitions,
16582 colors#8, ncv#3, pairs#64,
16584 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
16585 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
16586 %=%t46m%e%p1%{7}%=%t107m%;,
16587 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
16588 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
16589 %=%t36m%e%p1%{7}%=%t97m%;,
16590 ibm+16color|IBM aixterm color definitions,
16591 colors#16, pairs#0x100,
16592 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
16593 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
16594 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16595 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16596 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16597 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16598 ibm5154|IBM 5154 Color display,
16599 colors#8, ncv@, pairs#64,
16600 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16602 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
16603 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
16605 ibmvga-c|IBM VGA display color termcap,
16606 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16607 nel=\r\n, use=ibmega-c,
16608 ibmvga|IBM VGA display,
16609 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16610 nel=\r\n, use=ibmega,
16611 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
16612 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
16614 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
16615 ibm6155|IBM 6155 Black & White display,
16616 blink@, bold@, use=ibm5151,
16617 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
16618 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
16620 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
16621 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
16623 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
16625 ibm6154|IBM 6154 Color displays,
16626 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16627 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16629 sgr0=\E[0;10m, use=ibm5154,
16630 ibm6153|IBM 6153 Black & White display,
16631 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16632 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16634 sgr0=\E[0;10m, use=ibm5151,
16635 ibm6153-90|IBM 6153 Black & White display,
16637 blink@, bold@, use=ibm5151,
16638 ibm6153-40|IBM 6153 Black & White display,
16639 cols#40, lines#12, use=ibm6153-90,
16640 ibm8512|ibm8513|IBM color VGA Terminal,
16642 cols#80, it#8, lines#25,
16643 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
16644 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
16645 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
16646 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
16647 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
16648 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
16649 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16650 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
16651 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
16652 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
16653 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
16654 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
16655 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16657 hft-c|HFT with Color,
16658 colors#8, pairs#64,
16659 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
16660 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
16661 use=ibm5151, use=ibm+color,
16662 hft-c-old|HFT with Color PC850,
16663 colors#8, pairs#64,
16664 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16666 hft-old|AIWS High Function Terminal,
16669 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16670 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16671 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
16672 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
16673 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16674 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
16675 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16676 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
16677 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
16678 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
16679 ibm-system1|system1|ibm system/1 computer,
16682 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
16683 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
16685 # lft-pc850 : IBM Low Function Terminal Device
16686 # lft "supports" underline, bold, and blink in the sense that the lft code
16687 # sets all the right bits. HOWEVER, depending upon the adapter, these
16688 # attributes may or may not be supported by the device driver.
16689 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
16691 cols#80, it#8, lines#25,
16692 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16694 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16695 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16696 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16697 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16698 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
16699 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
16700 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
16701 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
16702 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
16703 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
16704 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
16705 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
16706 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
16707 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
16708 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
16709 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
16710 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
16711 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16712 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
16713 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
16714 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
16715 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
16716 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16717 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16718 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16720 # "Megapel" refers to the display adapter, which was used with the IBM RT
16722 ibm5081|hft|IBM Megapel Color display,
16723 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
16724 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
16725 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
16728 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
16730 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
16732 ibm8514|IBM 8514/a color VGA display,
16734 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
16735 ibm8514-c|IBM 8514 color display with standout and underline,
16738 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
16739 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
16743 # AIX entries. IBM ships these with AIX 3.2.5.
16744 # -- added rc, sc based on manpage -TD
16745 # -- added rmacs, smacs based on manpage -TD
16746 # Note that we could use ibm+16color, but that is not how IBM defines this one.
16747 aixterm|IBM Aixterm Terminal Emulator,
16749 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16750 fsl=\E[?F, rc=\E8, ri@, rmacs=\E(B, s0ds=\E(B, s1ds=\E(0,
16752 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16753 %t;8%;m%?%p9%t\E(0%e\E(B%;,
16754 sgr0=\E[0;10m\E(B, smacs=\E(0, tsl=\E[?%p1%dT,
16756 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
16758 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16759 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
16760 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16761 %t;8%;m%?%p9%t\E(0%e\E(B%;,
16762 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
16763 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
16765 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
16766 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16768 tsl=\E[?%p1%dT, use=ibm6153,
16769 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
16771 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
16773 sgr0=\E[m, smacs@, use=aixterm,
16774 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
16776 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
16778 sgr0=\E[m, smacs@, use=aixterm-m,
16780 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
16781 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
16782 use=ibm+16color, use=aixterm,
16784 #### Infoton/General Terminal Corp.
16787 # gt100 sounds like something DEC would come out with. Let's hope they don't.
16788 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
16791 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16792 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
16793 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
16794 ind=\n, rmso=\Ea, smso=\Eb,
16798 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
16799 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
16800 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
16801 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
16802 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
16806 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
16807 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
16808 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
16812 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
16813 ed=^K, ind=\n, ll=^H^\,
16815 # The ICL6402 was actually the Kokusai Display System 6402.
16816 # The 6404 was the KDS7372 (color version of the 6402).
16818 # ICL6404 control codes follow:
16821 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16822 #ctrl-A set SOM position at cursor position
16825 #ctrl-I Horizontal tab
16828 #ctrl-L Cursor right
16829 #ctrl-M Carriage return
16830 #ctrl-N Disable xon/xoff to host
16831 #ctrl-O Enable xon/xoff to host
16832 #ctrl-R Enable bidirectional mode
16833 #ctrl-T Disable bidirectional mode
16834 #ctrl-V Cursor down
16835 #ctrl-Z Clear unprotected data to insert char
16836 #ctrl-^ Cursor home
16839 #ESC lead-in char for multiple character command
16841 #ESC space R execute power on sequence
16842 #ESC ! p1 p2 define scroll region:
16843 # p1 = scroll top line: 20h - 37h
16844 # p1 = scroll bottom line: 20h - 37h
16845 #ESC " unlock keyboard
16846 #ESC # lock keyboard
16847 #ESC $ Semi-graphics mode on
16848 #ESC % Semi-graphics mode off
16849 #ESC & protect mode on
16850 #ESC ' protect mode off
16851 #ESC ( write protect mode off (full intensity)
16852 #ESC ) write protect mode on (half intensity)
16854 #ESC * clear screen
16855 #ESC + clear unprotected data to insert char
16856 #ESC , clear unprotected data to half intensity spaces
16857 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
16858 # p1 = page number 0 - 3
16859 # p2 = row 20h - 7fh
16860 # p3 = column (lo) 20h - 7fh
16861 # p4 = column (hi) 20h - 21h (only 132 col)
16862 #ESC . p1 set cursor style:
16863 # p1 = 0 invisible cursor
16864 # p1 = 1 block blinking cursor
16865 # p1 = 2 block steady cursor
16866 # p1 = 3 underline blinking cursor
16867 # p1 = 4 underline steady cursor
16868 #ESC / transmit cursor location (page, row, column)
16869 #ESC 0 p1 p2 p3 p4 program edit key:
16870 # p1 = edit key code: '@'-'S', '`'-'s'
16871 # p2 p3 p4 = program data (3 bytes)
16874 #ESC 2 clear tab at cursor
16875 #ESC 3 clear all tabs
16876 #ESC 4 send unprotect line to cursor
16877 #ESC 5 send unprotect page to cursor
16878 #ESC 6 send line to cursor
16879 #ESC 7 send page to cursor
16880 #ESC 8 n set scroll mode:
16881 # n = 0 set jump scroll
16882 # n = 1 set smooth scroll
16883 #ESC 9 n control display:
16884 # n = 0 display off
16886 #ESC : clear unprotected data to null
16887 #ESC ; clear unprotected data to insert char
16890 #ESC = p1 p2 address cursor to row, column
16891 # p1 = row 20h - 7fh
16892 # p2 = column (lo) 20h - 7fh
16893 # p3 = column (hi) 20h - 21h (only 132 col)
16894 #ESC > keyclick off
16895 #ESC ? transmit cursor location (row, column)
16897 #ESC @ copy print mode on
16898 #ESC A copy print mode off
16899 #ESC B block mode on
16900 #ESC C block mode off (conversation mode)
16901 #ESC D F set full duplex
16902 #ESC D H set half duplex
16904 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
16905 # 0 = black, 1 = red, 2 = green, 3 = yellow
16906 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
16907 #ESC G n set serial field attribute (n = 30h - 3Fh)
16908 #ESC H n full graphics mode:
16909 # n = 0 exit full graphics mode
16910 # n = 1 enter full graphics mode
16913 #ESC K forward page
16915 #ESC L unformatted page print
16916 #ESC M L move window left (132 col mode only)
16917 #ESC M R move window right (132 col mode only)
16918 #ESC N set page edit (clear line edit)
16919 #ESC O set line edit (clear page edit)
16920 #ESC P formatted page print
16921 #ESC Q character insert
16923 #ESC S send message unprotected only
16924 #ESC T erase line to insert char
16925 #ESC U set monitor mode (see ESC X, ESC u)
16927 #ESC V n select video attribute mode:
16928 # n = 0 serial field attribute mode
16929 # n = 1 parallel character attribute mode
16930 #ESC V 2 n define line attribute:
16931 # n = 0 single width single height
16932 # n = 1 single width double height
16933 # n = 2 double width single height
16934 # n = 3 double width double height
16935 #ESC V 3 n select character font:
16936 # n = 0 system font
16937 # n = 1 user defined font
16938 #ESC V 4 n select screen mode:
16939 # n = 0 page screen mode
16940 # n = 1 virtual screen mode
16941 #ESC V 5 n control mouse mode:
16942 # n = 0 disable mouse
16943 # n = 1 enable sample mode
16944 # n = 2 send mouse information
16945 # n = 3 enable request mode
16946 #ESC W character delete
16947 #ESC X clear monitor mode (see ESC U, ESC u)
16948 #ESC Y erase page to insert char
16950 #ESC Z n send user/status line:
16951 # n = 0 send user line
16952 # n = 1 send status line
16953 # n = 2 send terminal ID
16954 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
16958 # 3 = blink blank (= blank)
16960 # 5 = reverse blank
16961 # 6 = reverse blink
16962 # 7 = reverse blink blank (= reverse blank)
16964 # 9 = underline blank
16965 # : = underline blink
16966 # ; = underline blink blank
16967 # < = reverse underline
16968 # = = reverse underline blank
16969 # > = reverse underline blink
16970 # ? = reverse underline blink blank
16971 # p2, p3: f/grnd, b/grnd colour
16972 # (see ESC F for colours)
16973 # use ZZ for mono, eg.
16974 # ESC [ 0 Z Z for normal
16975 # ESC [ 4 Z Z for inverse etc.
16977 #ESC \ n set page size:
16978 # n = 1 24 lines/page
16979 # n = 2 48 lines/page
16980 # n = 3 72 lines/page
16981 # n = 4 96 lines/page
16982 #ESC ] n set Wordstar mode:
16983 # n = 0 normal (KDS7372) mode
16984 # n = 1 Wordstar mode
16986 #ESC b set foreground colour screen
16988 #ESC c n enter self-test mode:
16989 # n = 0 exit self test mode
16993 # n = 4 screen display test
16994 # n = 5 main/printer port test
16995 # n = 6 mouse port test
16996 # n = 7 graphics board test
16997 # n = 8 graphics memory test
16998 # n = 9 display all 'E'
16999 # n = : display all 'H'
17000 #ESC d set background colour screen
17002 #ESC e n program insert char (n = insert char)
17003 #ESC f text CR load user status line with 'text'
17005 #ESC g display user status line on 25th line
17006 #ESC h display system status line on 25th line
17008 #ESC j reverse linefeed
17009 #ESC k n duplex/local edit mode:
17010 # n = 0 duplex edit mode
17011 # n = 1 local edit mode
17012 #ESC l n select virtual screen:
17015 #ESC m save current config to NVRAM
17016 #ESC n p1 select display screen:
17021 #ESC o p1 p2 set characters/line and attribute:
17022 # p1 = 0 80 chars/line
17024 #ESC o p1 p2 set characters/line and attribute:
17025 # p1 = 0 80 chars/line
17026 # p1 = 1 132 chars/line
17027 # p2 = 0 single width single height
17028 # p2 = 1 single width double height
17029 # p2 = 2 double width single height
17030 # p2 = 3 double width double height
17032 #ESC q insert mode on
17033 #ESC r edit mode on
17034 #ESC s send message all
17035 #ESC t erase line to null
17036 #ESC u clear monitor mode (see ESC U, ESC X)
17037 #ESC v autopage mode on
17038 #ESC w autopage mode off
17039 #ESC x p1 p2 p3 define delimiter code...
17040 #ESC y erase page to null
17042 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
17043 # p1 = starting row
17044 # p2 = starting column
17048 #ESC { p1 p2 p3 p4 configure main port
17049 # (baud, stop bits, parity, word length)
17051 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
17052 # p1 = function key code:
17053 # '1' - ';' normal f1- f11
17054 # '<' - 'F' shifted f1 - f11
17055 # p2 = program mode:
17059 # Ctrl-Y = terminator
17060 # (use Ctrl-P to escape ^P, ^Y )
17062 #ESC } p1 p2 p3 p4 configure printer port
17063 # (baud, stop bits, parity, word length)
17064 #ESC ~ send system status
17066 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
17068 # Entry is by esr going solely on above information and is UNTESTED.
17069 # This actually looks a lot like a Televideo 9xx.
17070 # This entry uses page 0 and is monochrome; I'm not brave enough to try
17071 # to make color work without a test terminal. The <am> capability is a guess.
17072 # The initialization string sets conversation mode, blinking underline cursor,
17073 # full duplex, parallel attribute mode, display user status line, white
17074 # foreground, black background, normal highlight.
17076 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
17079 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
17080 cnorm=\E.3, cr=\r, csr=\E!%+%p1%{32}%+%p2%{32}, cub1=^H,
17082 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
17083 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
17084 hts=\E1, il1=\EE, invis=\E[1ZZ,
17085 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
17086 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
17087 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
17088 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
17089 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
17090 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
17091 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
17092 rs2=\Eo1, use=icl6404,
17094 #### Interactive Systems Corp
17096 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
17097 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
17098 # bought out by Sun.
17101 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
17102 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
17103 # ":le=^_:" later overridden -- esr)
17104 intext|Interactive Systems Corporation modified owl 1200,
17106 cols#80, it#8, lines#24, xmc#1,
17107 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
17108 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
17109 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
17110 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
17111 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
17112 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
17113 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
17114 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
17116 intext2|intextii|INTERACTIVE modified owl 1251,
17118 cols#80, lines#24, xmc#0,
17119 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
17120 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17121 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
17122 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
17123 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
17124 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
17125 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
17126 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
17127 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
17128 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
17129 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
17132 #### Kimtron (abm, kt)
17134 # Kimtron seems to be history, but as March 1998 these people are still
17135 # offering repair services for Kimtron equipment:
17137 # Com/Pair Monitor Service
17138 # 1105 N. Cliff Ave.
17139 # Sioux Falls, South Dakota 57103
17141 # WATS voice: 1-800/398-4946
17142 # POTS fax: +1 605/338-8709
17143 # POTS voice: +1 605/338-9650
17144 # Email: <compair@sd.cybernex.net>
17145 # Internet/Web: <http://www.com-pair.com>
17147 # Kimtron entries include (undocumented) codes for: enter dim mode,
17148 # enter bold mode, enter reverse mode, turn off all attributes.
17151 # Kimtron ABM 85 added by Dual Systems
17152 # (abm85: removed duplicated ":kd=^J:" -- esr)
17153 abm85|Kimtron ABM 85,
17154 OTbs, am, bw, msgr,
17155 cols#80, it#8, lines#24, xmc#1,
17156 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
17157 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17158 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
17159 if=/usr/share/tabset/stdcrt, il1=\EE,
17160 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
17161 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
17162 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
17163 # Kimtron ABM 85H added by Dual Systems.
17164 # Some notes about the abm85h entries:
17165 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
17166 # firmware revs prior to SP51
17167 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
17168 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
17169 # in some places and NOT software settable i.e., <is2> can't fix it)
17170 # 3) In 85h mode, the arrow keys and special functions transmit when
17171 # the terminal is in dup-edit, and work only locally in local-edit.
17172 # Vi won't swallow `del char' for instance, but <smcup> turns on
17173 # dup-edit anyway so that the arrow keys will work right. If the
17174 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
17175 # <is2>. Note that 920E mode does not have software commands to toggle
17176 # between dup and local edit, so you get whatever was set last on the
17178 # 4) <flash> attribute is nice, but seems too slow to work correctly
17180 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
17181 # are selected, the <xmc@> entry should be removed.
17182 # 6) auto new-line should be on (selectable from setup mode only)
17184 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
17185 abm85h|Kimtron ABM 85H native mode,
17188 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
17190 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
17192 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
17194 abm85e|Kimtron ABM 85H in 920E mode,
17196 bel=^G, dim=\E), flash@,
17197 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
17199 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17200 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
17203 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
17205 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17206 # From: <malman@bbn-vax.arpa>
17207 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
17208 kt7|kimtron model kt-7,
17210 cols#80, it#8, lines#24,
17211 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
17212 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17213 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
17214 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
17215 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
17216 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
17217 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17218 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17219 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
17220 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
17221 # other kt7 entry and the adjacent key capabilities). Removed EE which is
17222 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
17223 # but we can't figure out what.
17224 kt7ix|kimtron model kt-7 or 70 in IX mode,
17226 cols#80, it#8, lines#25,
17227 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
17228 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
17229 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17230 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
17231 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
17232 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
17233 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
17234 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17235 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17236 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
17237 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
17238 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
17240 #### Microdata/MDIS
17242 # This was a line of terminals made by McDonnell-Douglas Information Systems.
17243 # These entries come direct from MDIS documentation. I have edited them only
17244 # to move primary names of the form p[0-9] * to aliases, and to comment out
17245 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
17246 # also removed the change history; the last version indicates this is
17247 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
17250 # McDonnell Information Systems Terminal Family History
17251 # =========================================
17253 # Prism-1, Prism-2 and P99:
17254 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
17256 # Prism-4 and Prism-5:
17257 # Slightly less ancient range of Microdata terminals. Follow-on from
17258 # Prism-2, but with many enhancements. P5 has eight display pages.
17261 # A special terminal for use with library systems, primarily in Germany.
17262 # Limited numbers. Similar functionality to P5 (except attributes?).
17264 # Prism-7, Prism-8 and Prism-9:
17265 # More recent range of MDIS terminals, in which P7 and P8
17266 # replace the P4 & P5, with added functionality, and P9 is the flagship.
17267 # The P9 has two emulation modes - P8 and ANSI - and includes a
17268 # large number of the DEC VT220 control sequences. Both
17269 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
17271 # Prism-12 and Prism-14:
17272 # Latest range, functionally very similar to the P9. The P14 has a
17273 # black-on-white overscanning screen.
17275 # The terminfo definitions given here are:
17277 # p2 - Prism-2 (or Prism-1 or P99).
17279 # p4 - Prism-4 (and older P7s & P8s).
17280 # p5 - Prism-5 (or Prism-6).
17283 # p8 - Prism-8 (in national or multinational mode).
17284 # p8-w - 132 column version of p8.
17285 # p9 - Prism-9 in ANSI mode.
17286 # p9-w - 132 column version of p9.
17287 # p9-8 - Prism-9 in Prism-8 emulation mode.
17288 # p9-8-w - As p9-8, but with 132 columns.
17290 # p12 - Prism-12 in ANSI mode.
17291 # p12-w - 132 column version of p12.
17292 # p12-m - Prism-12 in MDC emulation mode.
17293 # p12-m-w - As p12-m, but with 132 columns.
17294 # p14 - Prism-14 in ANSI mode.
17295 # p14-w - 132 column version of p14.
17296 # p14-m - Prism-14 in MDC emulation mode.
17297 # p14-m-w - As p14-m, but with 132 columns.
17302 # Includes Prism-1 and basic P99 without SP or MP loaded.
17303 # The simplest form of Prism-type terminal.
17304 # Basic cursor movement and clearing operations only.
17305 # No video attributes.
17307 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17308 # value up, followed by backspace.
17310 prism2|MDC Prism-2,
17313 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17314 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17315 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17316 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
17317 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17318 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17319 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
17324 # Includes early versions of P7 & P8.
17325 # Basic family definition for most Prisms (except P2 and P9 ANSI).
17327 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17328 # value up, followed by backspace.
17329 # Cursor key definitions removed because they interfere with vi and csh keys.
17331 prism4|p4|P4|MDC Prism-4,
17332 am, bw, hs, mc5i, msgr,
17333 cols#80, lines#24, wsl#72, xmc#1,
17334 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
17335 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17336 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17337 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17338 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
17339 fsl=\035\345, home=^A,
17340 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17341 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17342 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
17343 rev=^CD, rmso=^C\s, rmul=^C\s,
17344 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
17345 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
17346 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
17347 vpa=\013%p1%{32}%+%c,
17352 # Same definition as p4. Includes Prism-6 (not tested!).
17353 # Does not use any multi-page features.
17355 prism5|p5|P5|MDC Prism-5,
17361 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
17363 # Use p4 for very early models of P7.
17364 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17366 prism7|p7|P7|MDC Prism-7,
17367 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
17372 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
17373 # Supports national and multinational character sets.
17375 # Alternate char set operations only work in multinational mode.
17376 # Use p4 for very early models of P8.
17377 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17378 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17380 prism8|p8|P8|MDC Prism-8,
17381 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
17382 vpa=\E[%i%p1%dd, use=p4,
17384 # p8-w: Prism-8 in 132 column mode
17385 # --------------------------------
17387 # 'Wide' version of p8.
17389 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17391 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
17393 is2=\E[<12h\E[<14h, use=p8,
17395 # p9: Prism-9 in ANSI mode
17396 # -------------------------
17398 # The "flagship" model of this generation of terminals.
17399 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
17401 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
17402 # Fixes to deal with terminal firmware bugs:
17403 # . 'ri' uses insert-line since rev index doesn't always
17404 # . 'sgr0' has extra '0' since esc[m fails
17405 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
17406 # Not covered in the current definition:
17408 # . Programming Fn keys
17409 # . Graphic characters (defaults correctly to vt100)
17410 # . Padding values (sets xon)
17411 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17413 prism9|p9|P9|MDC Prism-9 in ANSII mode,
17414 am, bw, hs, msgr, xenl, xon,
17415 cols#80, it#8, lines#24, vt#3, wsl#72,
17416 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
17417 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
17418 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17419 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17420 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17421 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
17422 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
17423 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
17424 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
17425 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
17426 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17427 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17428 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
17429 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
17430 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
17431 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
17432 rmso=\E[27m, rmul=\E[24m,
17433 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
17436 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
17437 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
17438 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17439 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
17442 # p9-w: Prism-9 in 132 column mode
17443 # --------------------------------
17445 # 'Wide' version of p9.
17447 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
17449 is2=\E[&p\E[<12l\E F\E[<14h,
17450 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
17452 # p9-8: Prism-9 in P8 mode
17453 # ------------------------
17455 # P9 terminal in P8 emulation mode.
17456 # Similar to p8 definition.
17457 # Insertion and deletion operations possible.
17459 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
17460 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17461 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
17463 # p9-8-w: Prism-9 in P8 and 132 column modes
17464 # ------------------------------------------
17466 # P9 terminal in P8 emulation mode and 132 column mode.
17468 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
17469 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17470 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
17472 # p12: Prism-12 in ANSI mode
17473 # ---------------------------
17475 # See p9 definition.
17477 prism12|p12|P12|MDC Prism-12 in ANSI mode,
17480 # p12-w: Prism-12 in 132 column mode
17481 # ----------------------------------
17483 # 'Wide' version of p12.
17485 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
17488 # p12-m: Prism-12 in MDC emulation mode
17489 # -------------------------------------
17491 # P12 terminal in MDC emulation mode.
17492 # Similar to p8 definition.
17493 # Insertion and deletion operations possible.
17495 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
17498 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
17499 # -------------------------------------------------------
17501 # P12 terminal in MDC emulation mode and 132 column mode.
17503 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
17506 # p14: Prism-14 in ANSII mode
17507 # ---------------------------
17509 # See p9 definition.
17511 prism14|p14|P14|MDC Prism-14 in ANSII mode,
17514 # p14-w: Prism-14 in 132 column mode
17515 # ----------------------------------
17517 # 'Wide' version of p14.
17519 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
17522 # p14-m: Prism-14 in MDC emulation mode
17523 # -------------------------------------
17525 # P14 terminal in MDC emulation mode.
17526 # Similar to p8 definition.
17527 # Insertion and deletion operations possible.
17529 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
17532 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
17533 # -------------------------------------------------------
17535 # P14 terminal in MDC emulation mode and 132 column mode.
17537 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
17540 # End of McDonnell Information Systems Prism definitions
17542 # These things were popular in the Pick database community at one time
17543 # From: George Land <georgeland@aol.com> 24 Sep 1996
17544 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
17546 cols#80, lines#24, ma#1, wsl#78, xmc#1,
17547 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
17548 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
17549 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
17550 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
17551 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
17552 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
17553 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17554 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
17555 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
17556 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
17559 #### Microterm (act, mime)
17561 # The mime1 entries refer to the Microterm Mime I or Mime II.
17562 # The default mime is assumed to be in enhanced act iv mode.
17565 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
17566 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
17567 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
17568 # since Sytek insists ^S means xoff.
17569 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
17570 act4|microterm|microterm act iv,
17573 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
17574 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
17575 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
17576 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
17577 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
17579 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
17580 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
17581 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
17582 act5|microterm5|microterm act v,
17583 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
17585 # Mimes using brightness for standout. Half bright is really dim unless
17586 # you turn up the brightness so far that lines show up on the screen.
17587 mime-fb|full bright mime1,
17588 is2=^S\E, rmso=^S, smso=^Y, use=mime,
17589 mime-hb|half bright mime1,
17590 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
17591 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
17592 # the more plausible ":do=^J:" -- esr)
17593 # uc was at one time disabled to get around a curses bug, be wary of it
17594 mime|mime1|mime2|mimei|mimeii|microterm mime1,
17596 cols#80, it#8, lines#24, vt#9,
17597 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
17598 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
17599 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
17600 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
17601 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
17602 # These termcaps (for mime2a) put the terminal in low intensity mode
17603 # since high intensity mode is so obnoxious.
17604 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
17607 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17608 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
17609 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
17610 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
17611 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
17612 smir=\EE, smso=\E\:, smul=\E6,
17613 # This is the preferred mode (but ^X can't be used as a kill character)
17614 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
17616 cols#80, it#8, lines#24,
17617 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17618 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
17619 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
17620 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
17621 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
17622 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
17623 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
17624 mime3a|mime1 emulating 3a,
17626 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
17627 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
17629 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
17631 # Wed Mar 9 18:53:21 1983
17632 # We run our terminals at 2400 baud, so there might be some timing problems at
17633 # higher speeds. The major improvements in this model are the terminal now
17634 # scrolls down and insert mode works without redrawing the rest of the line
17635 # to the right of the cursor. This is done with a bit of a kludge using the
17636 # exit graphics mode to get out of insert, but it does not appear to hurt
17637 # anything when using vi at least. If you have some users using act4s with
17638 # programs that use curses and graphics mode this could be a problem.
17639 mime314|mm314|mime 314,
17642 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
17643 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
17644 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
17645 # Microterm mime 340 from University of Wisconsin
17646 mm340|mime340|mime 340,
17648 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17649 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17650 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
17651 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
17652 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
17653 # This came from University of Wisconsin marked "astro termcap for jooss".
17654 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
17655 # also added <rmam>/<smam> based on the init string -- esr)
17656 mt4520-rv|micro-term 4520 reverse video,
17657 am, hs, msgr, xenl, xon,
17658 cols#80, it#8, lines#24, wsl#80,
17659 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
17660 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17661 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17662 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17663 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17664 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
17665 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
17666 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17667 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
17669 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17670 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
17671 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
17672 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
17673 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
17674 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
17675 tbc=\E[g, tsl=\E[25;1H,
17677 # Fri Aug 5 08:11:57 1983
17678 # This entry works for the ergo 4000 with the following setups:
17679 # ansi,wraparound,newline disabled, xon/xoff disabled in both
17682 # WARNING!!! There are multiple versions of ERGO 4000 microcode
17683 # Be advised that very early versions DO NOT WORK RIGHT !!
17684 # Microterm does have a ROM exchange program- use it or lose big
17685 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
17686 ergo4000|microterm ergo 4000,
17689 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
17690 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17691 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
17692 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
17693 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
17694 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17695 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
17696 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
17697 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
17698 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
17703 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
17704 # For what happened to that group, see the ADDS section.
17706 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
17709 # The following vendor-supplied termcaps were captured from the Boundless
17710 # Technologies site, 8 March 1998. I removed all-upper-case names that were
17711 # identical, except for case, to lower-case ones. I also uncommented the acsc
17714 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17715 # DEC vt200/300 with color capabilities added.
17716 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17717 colors#8, pairs#64,
17718 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17720 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17721 # DEC vt200/300 with color capabilities added.
17722 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17723 colors#8, pairs#64,
17724 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17725 use=ncr260vt300wan,
17726 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17727 # DEC vt200/300 with color capabilities added.
17728 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
17729 colors#8, pairs#64,
17730 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17732 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17733 # DEC vt200/300 with color capabilities added.
17734 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
17735 colors#8, pairs#64,
17736 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17737 use=ncr260vt300wpp,
17738 # This definition for ViewPoint supports several attributes. This means
17739 # that it has magic cookies (extra spaces where the attributes begin).
17740 # Some applications do not function well with magic cookies. The System
17741 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17742 # If supporting various attributes is not vital, 'xmc#1' and the extra
17743 # attributes can be removed.
17744 # Mapping to ASCII character set ('acsc' capability) can also be
17745 # restored if needed.
17746 ncr260vppp|NCR 2900_260 viewpoint,
17747 am, bw, hs, km, mc5i, mir, msgr, xon,
17748 cols#80, lines#24, nlab#32, xmc#1,
17749 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17750 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
17751 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
17752 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
17753 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
17754 el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
17755 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
17756 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17758 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
17759 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
17760 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=\002\:\r,
17761 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
17762 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
17763 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
17764 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
17765 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
17766 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
17767 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
17768 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
17769 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
17770 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
17771 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17772 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17774 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
17775 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
17776 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
17778 cup=\Ea%i%p1%dR%p2%dC$<30>,
17779 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17781 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17784 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
17785 am, hs, mir, msgr, xenl, xon,
17786 cols#80, lines#24, nlab#32,
17787 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17788 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17789 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17790 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
17791 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17792 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17793 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17794 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17795 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17796 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
17797 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
17798 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
17799 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
17801 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17803 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17804 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
17805 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
17806 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
17807 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
17808 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17811 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17812 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17813 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
17814 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
17815 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
17816 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
17818 cup=\E[%i%p1%d;%p2%dH$<30>,
17819 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17821 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17824 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
17825 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17827 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17828 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17829 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
17830 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
17831 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17833 smkx=\E=, use=ncr260vt100an,
17834 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
17836 cup=\E[%i%p1%d;%p2%dH$<30>,
17837 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17839 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17842 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
17843 am, hs, mir, msgr, xenl, xon,
17844 cols#80, lines#24, nlab#32,
17845 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17846 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17847 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17848 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17849 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17850 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17851 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17852 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17853 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17854 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17855 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17856 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17857 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17858 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17860 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17861 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17862 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17863 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17864 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
17865 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
17866 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
17867 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
17868 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
17869 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
17870 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
17871 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17872 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
17873 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
17874 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17877 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17878 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17879 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17880 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17881 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17883 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
17885 cup=\E[%i%p1%d;%p2%dH$<30>,
17886 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
17887 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
17888 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
17889 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17890 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17891 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17892 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17894 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
17896 cup=\E[%i%p1%d;%p2%dH$<30>,
17897 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17899 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17902 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
17903 am, hs, mir, msgr, xenl, xon,
17904 cols#80, lines#24, nlab#32,
17905 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17906 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17907 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17908 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17909 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17910 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17911 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17912 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17913 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17914 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17915 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17916 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17917 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17918 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17920 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17921 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17922 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17923 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17924 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
17925 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
17926 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
17927 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
17928 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17929 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17930 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
17931 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
17932 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
17934 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17937 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17938 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17939 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17940 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17941 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17943 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
17945 cup=\E[%i%p1%d;%p2%dH$<30>,
17946 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17948 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17951 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
17952 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17953 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17954 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17955 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17957 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
17959 cup=\E[%i%p1%d;%p2%dH$<30>,
17960 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17962 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17965 # This terminfo file contains color capabilities for the Wyse325 emulation of
17966 # the NCR 2900/260C color terminal. Because of the structure of the command
17967 # (escape sequence) used to set color attributes, one of the fore/background
17968 # colors must be preset to a given value. I have set the background color to
17969 # black. The user can change this setup by altering the last section of the
17970 # 'setf' definition. The escape sequence to set color attributes is
17971 # ESC d y <foreground_color> <background_color> 1
17972 # In addition, the background color can be changed through the desk accessories.
17973 # The capability 'op' sets colors to green on black (default combination).
17975 # NOTE: The NCR Unix System Administrator's Shell will not function properly
17976 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
17977 # capability and recompile if you wish to have it included.
17979 ncr260wy325pp|NCR 2900_260 wyse 325,
17980 am, bw, hs, km, mc5i, mir, msgr, xon,
17981 colors#16, cols#80, lines#24, ncv#33, nlab#32,
17982 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17983 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
17984 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17985 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
17986 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
17987 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
17988 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
17989 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17991 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
17992 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
17993 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
17994 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
17995 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
17996 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
17997 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
17998 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
17999 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18000 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
18001 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18002 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18003 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18004 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18005 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18008 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18009 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18010 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
18011 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
18012 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
18013 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
18014 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
18015 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18017 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
18019 cup=\Ea%i%p1%dR%p2%dC$<30>,
18020 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18022 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18025 # This definition for Wyse 350 supports several attributes. This means
18026 # that it has magic cookies (extra spaces where the attributes begin).
18027 # Some applications do not function well with magic cookies. The System
18028 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18029 # If supporting various attributes is not vital, 'xmc#1' and the extra
18030 # attributes can be removed.
18031 # Mapping to ASCII character set ('acsc' capability) can also be
18032 # restored if needed.
18033 # In addition, color capabilities have been added to this file. The drawback,
18034 # however, is that the background color has to be black. The foreground colors
18035 # are numbered 0 through 15.
18037 # NOTE: The NCR Unix System Administrator's Shell does not function properly
18038 # with the 'pairs' capability defined as below. If you wish to
18039 # have it included, Un-comment it and recompile (using 'tic').
18041 ncr260wy350pp|NCR 2900_260 wyse 350,
18042 am, bw, hs, km, mc5i, mir, msgr, xon,
18043 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
18044 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18045 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18046 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18047 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
18048 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18049 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
18050 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
18051 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18053 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18054 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18055 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18056 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18057 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18058 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18059 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18060 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18061 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18062 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18063 mc0=\EP$<10>, mc4=^T, mc5=^R,
18064 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
18065 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18066 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18067 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18070 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18071 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18072 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
18073 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
18074 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
18075 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
18076 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
18077 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18079 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
18081 cup=\Ea%i%p1%dR%p2%dC$<30>,
18082 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18084 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18087 # This definition for Wyse 50+ supports several attributes. This means
18088 # that it has magic cookies (extra spaces where the attributes begin).
18089 # Some applications do not function well with magic cookies. The System
18090 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18091 # If supporting various attributes is not vital, 'xmc#1' and the extra
18092 # attributes can be removed.
18093 # Mapping to ASCII character set ('acsc' capability) can also be
18094 # restored if needed.
18095 # (ncr260wy50+pp: originally contained commented-out
18096 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
18097 ncr260wy50+pp|NCR 2900_260 wyse 50+,
18098 am, bw, hs, km, mc5i, mir, msgr, xon,
18099 cols#80, lines#24, nlab#32, xmc#1,
18100 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
18101 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18102 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18103 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
18104 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18105 ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
18106 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
18108 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18109 \Ee4\Ex@\E`9\Ee7$<100>,
18110 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18111 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18112 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18113 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18114 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18115 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18116 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18117 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18118 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18119 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18120 mc0=\EP$<10>, mc4=^T, mc5=^R,
18121 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18122 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18123 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18124 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18125 \Ee4\Ex@\E`9\Ee7$<100>,
18126 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
18127 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
18128 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
18130 cup=\Ea%i%p1%dR%p2%dC$<30>,
18131 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18132 \Ee4\Ex@\E`9\Ee7$<200>,
18133 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18134 \Ee4\Ex@\E`9\Ee7$<200>,
18136 ncr260wy60pp|NCR 2900_260 wyse 60,
18137 am, bw, hs, km, mc5i, mir, msgr, xon,
18138 cols#80, lines#24, nlab#32,
18139 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18140 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
18141 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18142 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
18143 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
18144 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
18145 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
18147 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18148 \Ee4\Ex@\E`9\Ee7$<100>,
18149 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
18150 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
18151 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
18152 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18153 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
18154 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
18155 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
18156 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
18157 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
18158 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18159 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18160 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
18161 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18162 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18163 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18164 \Ee4\Ex@\E`9\Ee7$<100>,
18165 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
18166 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
18168 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
18170 cup=\Ea%i%p1%dR%p2%dC$<30>,
18171 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18172 \Ee4\Ex@\E`9\Ee7$<100>,
18173 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18174 \Ee4\Ex@\E`9\Ee7$<100>,
18176 ncr160vppp|NCR 2900_160 viewpoint,
18178 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
18180 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
18182 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
18184 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
18185 use=ncr260vt100wan,
18186 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
18187 use=ncr260vt100wpp,
18188 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
18190 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
18192 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
18193 use=ncr260vt200wan,
18194 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
18195 use=ncr260vt200wpp,
18196 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
18198 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
18200 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
18201 use=ncr260vt300wan,
18202 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
18203 use=ncr260vt300wpp,
18204 ncr160wy50+pp|NCR 2900_160 wyse 50+,
18206 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
18207 use=ncr260wy50+wpp,
18208 ncr160wy60pp|NCR 2900_160 wyse 60,
18210 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
18212 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
18213 am, hs, mc5i, mir, msgr, xon,
18214 cols#80, it#8, lines#24, nlab#32,
18215 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
18216 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
18217 clear=\E[2J\E[1;1H$<300>, cr=\r,
18218 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
18219 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
18220 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
18221 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
18222 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
18223 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
18224 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
18225 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
18226 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
18228 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
18229 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
18230 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
18231 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
18232 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
18233 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
18234 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
18235 B\E)0\E%/0n\E[P\031$<200>,
18237 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
18238 %p3%|%t;7%;%?%p4%t;5%;m$<100>,
18239 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
18240 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
18242 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
18244 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
18245 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
18246 \E)0\E%/0n\E[P\031$<200>,
18249 # Vendor-supplied NCR termcaps end here
18251 # NCR7900 DIP switches:
18255 # 5 - Parity (Odd/Even)
18256 # 6 - Don't Send or Do Send Spaces
18257 # 7 - Parity Enable
18258 # 8 - Stop Bits (One/Two)
18261 # 1 - Upper/Lower Shift
18262 # 2 - Typewriter Shift
18263 # 3 - Half Duplex / Full Duplex
18264 # 4 - Light/Dark Background
18265 # 5-6 - Carriage Return Without / With Line Feed
18266 # 7 - Extended Mode
18267 # 8 - Suppress Keyboard Display
18270 # 1 - End of line entry disabled/enabled
18271 # 2 - Conversational mode / (Local?) Mode
18272 # 3 - Control characters displayed / not displayed
18273 # 4 - (2-wire?) / 4-wire communications
18274 # 5 - RTS on and off for each character
18275 # 6 - (50Hz?) / 60 Hz
18276 # 7 - Exit after level zero diagnostics
18277 # 8 - RS-232 interface
18280 # 1 - Reverse Channel (yes / no)
18281 # 2 - Manual answer (no / yes)
18282 # 3-4 - Cursor appearance
18283 # 5 - Communication Rate
18284 # 6 - Enable / Disable EXT turnoff
18285 # 7 - Enable / Disable CR turnoff
18286 # 8 - Enable / Disable backspace
18288 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
18289 # reverse, blink, dim, and underline) the appropriate number of bits (by
18290 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
18291 # '@' is (effectively) "or"ed with each attribute to generate the proper third
18292 # character in the <ESC>0 sequence. The <sgr> string implements the following
18295 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
18296 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
18298 # Where: P1 <==> Standout attribute parameter
18299 # P2 <==> Underline attribute parameter
18300 # P3 <==> Reverse attribute parameter
18301 # P4 <==> Blink attribute parameter
18302 # P5 <==> Dim attribute parameter
18303 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
18304 ncr7900i|ncr7900|ncr 7900 model 1,
18306 cols#80, lines#24, xmc#1,
18307 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18308 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
18309 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
18310 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
18312 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18314 sgr0=\E0@, smso=\E0Q, smul=\E0`,
18315 ncr7900iv|ncr 7900 model 4,
18318 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
18319 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
18320 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
18321 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
18322 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
18323 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
18324 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
18325 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
18326 # The user can enter a CTRL-B to get out of this locked state.
18327 # In <hpa>, we want to output the character given by the formula:
18328 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
18329 ncr7901|ncr 7901 model,
18332 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
18333 cub1=^H, cud1=\n, cuf1=^F,
18334 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
18336 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
18337 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
18338 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
18339 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18341 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
18342 vpa=\013%p1%{64}%+%c,
18344 # Newbury Data Recording Limited (Newbury Data)
18346 # Have been manufacturing and reselling various peripherals for a long time
18347 # They don't make terminals anymore, but are still in business (in 2007).
18348 # Their e-mail address is at ndsales@newburydata.co.uk
18349 # and their post address is:
18351 # Newbury Data Recording Ltd,
18352 # Premier Park, Road One,
18353 # Winsford, Cheshire, CW7 3PT
18355 # Their technical support is still good, they sent me for free a printed copy
18356 # of the 9500 user manual and I got it just 1 week after I first contacted them
18360 # Manufactured in the early/mid eighties, behaves almost the same as a
18361 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
18362 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
18363 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
18364 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
18365 # recognized: if you type in "ESC !", the next (third) character is not
18366 # echoed, showing that the terminal was actually waiting for a parameter!
18367 ndr9500|nd9500|Newbury Data 9500,
18368 am, bw, hs, mc5i, mir, msgr, ul, xon,
18369 cols#80, lines#24, wsl#79,
18370 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
18371 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
18372 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18373 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
18374 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
18375 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
18376 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
18377 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
18378 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18379 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
18380 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
18381 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18382 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18383 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
18384 pfloc=\E|%{48}%p1%+%c2%p2\031,
18385 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
18386 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
18387 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
18388 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
18389 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
18391 ndr9500-nl|NDR 9500 with no status line,
18394 dsl@, fsl@, tsl@, use=ndr9500,
18396 ndr9500-25|NDR 9500 with 25th line enabled,
18397 lines#25, use=ndr9500,
18399 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
18400 lines#25, use=ndr9500-nl,
18402 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
18405 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
18406 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
18407 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
18408 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
18410 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
18411 lines#25, use=ndr9500-mc,
18413 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
18416 dsl@, fsl@, tsl@, use=ndr9500-mc,
18418 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
18419 lines#25, use=ndr9500-mc-nl,
18421 #### Perkin-Elmer (Owl)
18423 # These are official terminfo entries from within Perkin-Elmer.
18426 bantam|pe550|pe6100|perkin elmer 550,
18429 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18430 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18431 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
18432 fox|pe1100|perkin elmer 1100,
18435 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
18436 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18437 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
18438 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
18439 owl|pe1200|perkin elmer 1200,
18442 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
18443 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18444 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
18445 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
18446 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
18447 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
18448 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
18449 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
18450 pe1251|pe6300|pe6312|perkin elmer 1251,
18452 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
18453 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
18454 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18455 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
18456 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
18457 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
18458 # (pe7000m: this had
18459 # rmul=\E!\0, smul=\E!\040,
18460 # which is probably wrong, it collides with kf0
18461 pe7000m|perkin elmer 7000 series monochrome monitor,
18464 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
18465 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
18466 ed=\EJ, el=\EI, home=\EH, ind=\n,
18467 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
18468 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
18469 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
18470 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
18472 pe7000c|perkin elmer 7000 series colour monitor,
18473 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
18474 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
18478 # Sperry Univac has merged with Burroughs to form Unisys.
18481 # This entry is for the Sperry UTS30 terminal running the TTY
18482 # utility under control of CP/M Plus 1R1. The functionality
18483 # provided is comparable to the DEC vt100.
18484 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
18485 uts30|sperry uts30 with cp/m@1R1,
18487 cols#80, lines#24, wsl#40,
18488 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18489 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
18490 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
18491 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18492 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18493 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
18494 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
18495 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
18496 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
18497 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
18498 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
18499 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
18500 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
18501 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
18502 smul=\E[4m, tsl=\E], uc=\EPB,
18506 # Tandem builds these things for use with its line of fault-tolerant
18507 # transaction-processing computers. They aren't generally available
18508 # on the merchant market, and so are fairly uncommon.
18511 tandem6510|adm3a repackaged by Tandem,
18514 # A funny series of terminal that TANDEM uses. The actual model numbers
18515 # have a fourth digit after 653 that designates minor variants. These are
18516 # natively block-mode and rather ugly, but they have a character mode which
18517 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
18518 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
18519 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
18520 tandem653|t653x|Tandem 653x multipage terminal,
18521 OTbs, am, da, db, hs,
18522 cols#80, lines#24, wsl#64, xmc#1,
18523 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
18524 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
18525 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
18526 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
18528 #### Tandy/Radio Shack
18530 # Tandy has a line of VDTs distinct from its microcomputers.
18533 dmterm|deskmate terminal,
18536 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
18537 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18538 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
18539 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
18540 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
18541 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
18542 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
18543 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
18545 dt100|dt-100|Tandy DT-100 terminal,
18547 cols#80, lines#24, xmc#1,
18548 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18549 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18550 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18551 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
18552 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
18553 il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
18554 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
18555 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
18556 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
18557 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
18558 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
18559 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18560 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
18561 cols#132, use=dt100,
18562 dt110|Tandy DT-110 emulating ansi,
18565 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18566 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18567 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18568 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
18569 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
18570 ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n, is2=\E[?3l\E)0\E(B,
18571 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
18572 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
18573 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
18574 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
18575 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
18576 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
18577 smacs=^N, smso=\E[7m, smul=\E[4m,
18578 pt210|TRS-80 PT-210 printing terminal,
18581 bel=^G, cr=\r, cud1=\n, ind=\n,
18583 #### Tektronix (tek)
18585 # Tektronix tubes are graphics terminals. Most of them use modified
18586 # oscilloscope technology incorporating a long-persistence green phosphor,
18587 # and support vector graphics on a main screen with an attached "dialogue
18588 # area" for interactive text.
18591 tek|tek4012|tektronix 4012,
18594 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
18595 ff=\014$<1000>, is2=\E^O,
18596 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18597 tek4013|tektronix 4013,
18598 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
18599 tek4014|tektronix 4014,
18601 is2=\E\017\E9, use=tek4012,
18602 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18603 tek4015|tektronix 4015,
18604 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
18605 tek4014-sm|tektronix 4014 in small font,
18606 cols#121, lines#58,
18607 is2=\E\017\E\:, use=tek4014,
18608 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18609 tek4015-sm|tektronix 4015 in small font,
18610 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
18611 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
18613 # You need to have "stty nl2" in effect. Some versions of tset(1) know
18614 # how to set it for you.
18616 # It's got the Magic Cookie problem around stand-out mode. If you can't
18617 # live with Magic Cookie, remove the :so: and :se: fields and do without
18618 # reverse video. If you like reverse video stand-out mode but don't want
18619 # it to flash, change the letter 'H' to 'P' in the :so: field.
18620 tek4023|tektronix 4023,
18622 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
18623 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
18624 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
18625 rmso=^_@, smso=^_P,
18626 # It is recommended that you run the 4025 at 4800 baud or less;
18627 # various bugs in the terminal appear at 9600. It wedges at the
18628 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
18629 # on keyboard don't work. You have to hit BREAK twice to get
18630 # one break at any speed - this is a documented feature.
18631 # Can't use cursor motion because it's memory relative, and
18632 # because it only works in the workspace, not the monitor.
18633 # Same for home. Likewise, standout only works in the workspace.
18635 # <el> was commented out since vi and rogue seem to work better
18636 # simulating it with lots of spaces!
18638 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
18639 # and didn't seem necessary.
18641 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
18643 cols#80, it#8, lines#34, lm#0,
18644 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
18645 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
18646 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
18647 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
18648 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
18649 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
18650 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
18652 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18653 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
18655 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
18656 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
18657 tek4025-17|tek 4025 17 line window,
18658 lines#17, use=tek4025,
18659 tek4025-17-ws|tek 4025 17 line window in workspace,
18660 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
18661 \r\037wor\s17\r\037mon\s17\r,
18662 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
18663 smso=\037att e\r, use=tek4025-17,
18664 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
18665 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
18666 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18668 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
18669 # The following status modes are assumed for normal operation (replace the
18670 # initial "!" by whatever the current command character is):
18671 # !COM 29 # NOTE: changes command character to GS (^])
18677 # ^]STO 9 17 25 33 41 49 57 65 73
18678 # Other modes may be set according to communication requirements.
18679 # If the command character is inadvertently changed, termcap can't restore it.
18680 # Insert-character cannot be made to work on both top and bottom rows.
18681 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
18682 # There also seems to be a problem with vertical motion, perhaps involving
18683 # delete/insert-line, following a typed carriage return. This terminal sucks.
18684 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18685 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
18686 # work any more. -- esr)
18687 tek4025a|Tektronix 4025A,
18688 OTbs, OTpt, am, bw, da, db, xon,
18689 cols#80, it#8, lines#34,
18690 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
18691 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
18692 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
18693 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
18694 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
18695 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
18696 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
18697 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
18698 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
18699 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
18700 \s33\s41\s49\s57\s65\s73\035wor\s0;,
18702 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
18703 # Here's the command file that I use to get rogue to work on the 4025.
18704 # It should work with any program using the old curses (e.g. it better
18705 # not try to scroll, or cursor addressing won't work. Also, you can't
18707 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
18708 tek4025-cr|tek 4025 for curses and rogue,
18710 cols#80, it#8, lines#33,
18711 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
18712 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
18713 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18714 rmcup=\037wor 0, smcup=\037wor 33h,
18715 # next two lines commented out since curses only allows 128 chars, sigh.
18716 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
18717 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
18718 tek4025ex|4025ex|4027ex|tek 4025 w/!,
18719 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
18721 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18722 tek4105|tektronix 4105,
18723 OTbs, am, mir, msgr, ul, xenl, xt,
18724 cols#79, it#8, lines#29,
18725 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
18726 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
18727 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
18728 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18729 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
18730 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
18731 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
18732 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
18733 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
18734 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18735 smul=\E[=5;<2m, tbc=\E[1g,
18737 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
18738 tek4105-30|4015 emulating 30 line vt100,
18739 am, mir, msgr, xenl, xon,
18740 cols#80, it#8, lines#30, vt#3,
18741 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18742 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
18743 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18744 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18745 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
18746 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
18747 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
18748 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
18749 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
18750 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
18751 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
18752 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18753 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18754 %;m%?%p9%t\016%e\017%;$<2>,
18755 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
18756 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
18759 # Tektronix 4105 from BRL
18760 # The following setup modes are assumed for normal operation:
18761 # CODE ansi CRLF no DABUFFER 141
18762 # DAENABLE yes DALINES 30 DAMODE replace
18763 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
18764 # FLAGGING input INSERTREPLACE replace LFCR no
18765 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
18766 # SELECTCHARSET G1 0 TABS -2
18767 # Other setup modes may be set for operator convenience or communication
18768 # requirements; I recommend
18769 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18770 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18771 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18772 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
18773 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18774 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
18776 # and factory color maps. After setting these modes, save them with NVSAVE. No
18777 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18778 # "IC" cannot be used in combination with "im" & "ei".
18779 # "tek4105a" is just a guess:
18780 tek4105a|Tektronix 4105,
18781 OTbs, OTpt, msgr, xon,
18782 OTkn#8, cols#80, it#8, lines#30, vt#3,
18783 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18784 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18785 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18786 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18787 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18788 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18789 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18790 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18791 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18792 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18793 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18794 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18795 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18796 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18797 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18798 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18799 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
18800 \E[?7;8h\E[r\E[m\E>,
18801 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18802 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18805 # Tektronix 4106/4107/4109 from BRL
18806 # The following setup modes are assumed for normal operation:
18807 # CODE ansi COLUMNMODE 80 CRLF no
18808 # DABUFFER 141 DAENABLE yes DALINES 32
18809 # DAMODE replace DAVISIBILITY yes ECHO no
18810 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
18811 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
18812 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
18814 # Other setup modes may be set for operator convenience or communication
18815 # requirements; I recommend
18816 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18817 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18818 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18819 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
18820 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18821 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
18823 # and factory color maps. After setting these modes, save them with NVSAVE. No
18824 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18825 # "IC" cannot be used in combination with "im" & "ei".
18826 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
18828 cols#80, it#8, lines#32, vt#3,
18829 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18830 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18831 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18832 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18833 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18834 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18835 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18836 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18837 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18838 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18839 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18840 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18841 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18842 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18843 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18844 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18845 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
18846 ;5l\E[?7;8h\E[r\E[m\E>,
18847 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18848 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
18850 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
18851 # 0 selects Tek mode, i.e., \E%!0
18852 # 1 selects ANSI mode
18853 # 2 selects ANSI edit-mode
18854 # 3 selects VT52 mode
18856 # One odd thing about the description (which has been unchanged since the 90s)
18857 # is that the cursor addressing is using VT52 mode, and a few others use the
18858 # VT52's non-CSI versions of ANSI, e.g., \EJ.
18859 tek4107|tek4109|tektronix terminals 4107 4109,
18860 OTbs, am, mir, msgr, ul, xenl, xt,
18861 cols#79, it#8, lines#29,
18862 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
18863 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
18864 cub1=^H, cud1=\n, cuf1=\EC,
18865 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
18866 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
18867 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18868 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
18869 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
18870 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
18871 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
18872 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
18873 smul=\E%!1\E[4m$<2>\E%!0,
18874 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
18875 # see the note attached to tek4207.
18876 tek4207-s|Tektronix 4207 with sysline but no memory,
18878 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
18879 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18880 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18881 is2=\E7\E[?6l\E[2K\E[?6h\E8,
18882 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
18884 # The 4110 series may be a wonderful graphics series, but they make the 4025
18885 # look good for screen editing. In the dialog area, you can't move the cursor
18886 # off the bottom line. Out of the dialog area, ^K moves it up, but there
18887 # is no way to scroll.
18889 # Note that there is a floppy for free from Tek that makes the
18890 # 4112 emulate the vt52 (use the vt52 termcap). There is also
18891 # an expected enhancement that will use ANSI standard sequences.
18893 # 4112 in non-dialog area pretending to scroll. It really wraps
18894 # but vi is said to work (more or less) in this mode.
18896 # 'vi' works reasonably well with this entry.
18898 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
18901 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
18902 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
18903 # The 4112 with the ANSI compatibility enhancement
18904 tek4112|tek4114|tektronix 4110 series,
18907 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
18908 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
18909 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
18910 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
18911 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18912 tek4112-nd|4112 not in dialog area,
18914 cuu1=^K, use=tek4112,
18915 tek4112-5|4112 in 5 line dialog area,
18916 lines#5, use=tek4112,
18917 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
18918 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
18919 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
18920 # previously \0410 and \0411 sequences...I don't *think* they were supposed
18921 # to be 4-digit octal -- esr)
18922 tek4113|tektronix 4113 color graphics with 5 line dialog area,
18925 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
18926 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18928 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
18929 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
18931 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
18932 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
18933 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
18934 # :vb: needs enough delay to let you see the background color being toggled.
18935 tek4113-nd|tektronix 4113 color graphics with no dialog area,
18937 cols#80, it#8, lines#34,
18938 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
18940 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18942 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
18943 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
18944 # This entry is from Tek. Inc. (Brian Biehl)
18945 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
18946 otek4115|Tektronix 4115,
18947 OTbs, am, da, db, eo,
18948 cols#80, it#8, lines#34,
18949 cbt=\E[Z, clear=\E[H\E[2J,
18950 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
18951 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18952 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
18953 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
18955 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
18956 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
18957 kbs=^H, ri=\EM, rmam=\E[?7l,
18958 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
18959 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
18960 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
18962 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
18965 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
18966 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18967 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18968 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
18969 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
18970 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18971 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
18972 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
18973 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
18974 rmso=\E[m, rmul=\E[m,
18975 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
18977 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18978 vpa=\E[%p1%{1}%+%dd,
18979 # The tek4125 emulates a vt100 incorrectly - the scrolling region
18980 # command is ignored. The following entry replaces <csr> with the needed
18981 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
18982 # chokes on; and adds a lot of initialization for the tek dialog area.
18983 # Note that this entry uses all 34 lines and sets the cursor color to green.
18984 # Steve Jacobson 8/85
18985 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
18986 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
18987 tek4125|tektronix 4125,
18989 csr@, dl1=\E[1M, il1=\E[1L,
18990 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
18991 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
18993 rc@, sc@, smkx=\E=, use=vt100+4bsd,
18995 # From: <jcoker@ucbic>
18996 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
18997 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
18998 # note that if jcoker wasn't confused you may be able to use this one.
18999 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
19000 tek4207|Tektronix 4207 graphics terminal with memory,
19001 am, bw, mir, msgr, ul, xenl,
19002 cols#80, it#8, lines#32,
19003 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
19004 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19005 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
19006 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
19007 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
19008 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
19009 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
19010 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
19011 rev=\E[7m, ri=\E[T,
19012 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
19013 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
19014 smul=\E[4m, tbc=\E[1g,
19016 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
19017 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
19018 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
19019 tek4404|tektronix 4404,
19021 cols#80, it#8, lines#32,
19022 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
19023 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
19024 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
19025 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
19026 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
19027 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
19028 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19029 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
19030 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
19031 # Some unknown person wrote:
19032 # I added the is string - straight Unix has ESC ; in the login
19033 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
19034 # mode). The is string here cleans up a few things (but not
19036 ct8500|tektronix ct8500,
19039 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
19040 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
19041 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
19042 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
19043 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
19045 # Tektronix 4205 terminal.
19047 # am is not defined because the wrap around occurs not when the char.
19048 # is placed in the 80'th column, but when we are attempting to type
19049 # the 81'st character on the line. (esr: hmm, this is like the vt100
19050 # version of xenl, perhaps am + xenl would work!)
19052 # Bold, dim, and standout are simulated by colors and thus not allowed
19053 # with colors. The tektronix color table is mapped into the RGB color
19054 # table by setf/setb. All colors are reset to factory specifications by oc.
19055 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
19056 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
19057 # interval then maps into pre-defined value.
19058 tek4205|tektronix 4205,
19060 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
19061 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19062 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
19063 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
19064 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19065 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19066 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
19067 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
19068 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
19070 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
19071 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
19072 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
19073 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
19074 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
19075 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
19076 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
19077 %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
19078 C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
19080 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
19081 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
19082 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
19084 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
19086 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
19087 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
19088 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19089 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19091 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19092 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19094 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
19095 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
19096 smul=\E[4m, tbc=\E[1g,
19098 #### Teletype (tty)
19100 # These are the hardcopy Teletypes from before AT&T bought the company,
19101 # clattering electromechanical dinosaurs in Bakelite cases that printed on
19102 # pulpy yellow roll paper. If you remember these you go back a ways.
19103 # Teletype-branded VDTs are listed in the AT&T section.
19105 # The earliest UNIXes were designed to use these clunkers; nroff and a few
19106 # other programs still default to emitting codes for the Model 37.
19109 tty33|tty35|model 33 or 35 teletype,
19112 bel=^G, cr=\r, cud1=\n, ind=\n,
19113 tty37|model 37 teletype,
19115 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
19118 # There are known to be at least three flavors of the tty40, all seem more
19119 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
19120 # awful braindamage, such as printing a visible newline indicator after each
19121 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
19122 # braindamaged but has hope and is described here. The 40-4 is a 3270
19123 # lookalike and beyond hope. The terminal has visible bell but I don't know
19124 # it - it's null here to prevent it from showing the BL character.
19125 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
19126 # a "newline" style terminal (-crmode) vi figures all it needs is nl
19127 # to get crlf, even if <cr> is not ^M.)
19128 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
19129 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
19132 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
19133 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
19134 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
19135 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
19136 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
19137 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
19138 tty43|model 43 teletype,
19139 OTbs, am, hc, os, xon,
19141 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
19146 # You can add <is2=\E<> to put this 40-column mode, though I can't
19147 # for the life of me think why anyone would want to.
19148 scanset|sc410|sc415|Tymshare Scan Set,
19151 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
19152 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19153 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
19154 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
19155 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
19157 #### Volker-Craig (vc)
19159 # If you saw a Byte Magazine cover with a terminal on it during the early
19160 # 1980s, it was probably one of these. Carl Helmers liked them because
19161 # they could crank 19.2 and were cheap (that is, he liked them until he tried
19162 # to program one...)
19165 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
19166 # every other linefeed.
19167 vc303|vc103|vc203|volker-craig 303,
19170 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19171 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
19172 kcuu1=^N, ll=\017$<1>W,
19173 vc303a|vc403a|volker-craig 303a,
19174 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
19175 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
19176 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
19177 vc404|volker-craig 404,
19180 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19181 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
19182 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
19183 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
19184 vc404-s|volker-craig 404 w/standout mode,
19185 cud1=\n, rmso=^O, smso=^N, use=vc404,
19186 # From: <wolfgang@cs.sfu.ca>
19187 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
19188 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
19191 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
19192 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
19193 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
19194 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
19195 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
19196 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
19197 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
19198 rmso=\E^_, smso=\E^Y,
19199 vc415|volker-craig 415,
19200 clear=^L, use=vc404,
19202 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
19205 #### IBM PC and clones
19208 # The pcplot IBM-PC terminal emulation program is really messed up. It is
19209 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
19210 # doesn't support scrolling regions, ignores add line commands, and ignores
19211 # delete line commands. Consequently, the resulting behavior looks like a
19212 # crude adm3a-type terminal.
19213 # Steve Jacobson 8/85
19214 pcplot|pc-plot terminal emulation program,
19216 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
19217 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
19218 # I've found that my KayPro II, running MDM730, continues to emulate an
19219 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
19220 # system the following termcap entry works well:
19221 # I have noticed a couple of minor glitches, but nothing I can't work
19222 # around. (I added two capabilities from the BRL entry -- esr)
19223 kaypro|kaypro2|kaypro II,
19226 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
19227 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
19228 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
19230 # From IBM, Thu May 5 19:35:27 1983
19231 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
19232 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
19235 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
19236 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
19238 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
19239 OTbs, am, bw, eo, hs, km, msgr, ul,
19240 cols#80, it#8, lines#24,
19241 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
19243 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
19244 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19245 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19246 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
19247 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
19248 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
19249 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19250 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
19251 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
19252 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
19253 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
19254 rmso=\E[m, rmul=\E[m,
19255 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
19257 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
19261 # Apple II firmware console first, then various 80-column cards and
19262 # terminal emulators. For two cents I'd toss all these in the UFO file
19263 # along with the 40-column apple entries.
19266 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
19267 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
19268 # function of TIC, not the firmware.
19269 # The clear key on a IIgs will do something like clear-screen,
19270 # depending on what you're in.
19271 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
19272 OTbs, am, bw, eo, msgr,
19273 cols#80, it#8, lines#24,
19274 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
19275 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19276 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
19277 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
19279 # Apple //e with 80-column card, entry from BRL
19280 # The modem interface is permitted to discard LF (maybe DC1), otherwise
19281 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
19282 # Auto-wrap does not work right due to newline scrolling delay, which also
19283 # requires that you set "stty cr2".
19284 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
19285 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
19286 # using a terminal emulation program instead of the built-in firmware.
19290 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
19291 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
19292 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
19293 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19295 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
19296 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
19297 apple2e-p|Apple //e via Pascal,
19298 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
19299 kcud1=\n, use=apple2e,
19300 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
19301 # Enable DC3/DC1 flow control with "stty ixon -ixany".
19302 apple-ae|ASCII Express,
19303 OTbs, am, bw, msgr, nxon, xon,
19304 cols#80, it#8, lines#24,
19305 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19306 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19307 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
19308 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19310 appleII|apple ii plus,
19312 cols#80, it#8, lines#24,
19313 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
19314 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
19315 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
19316 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
19317 # Originally by Gary Ford 21NOV83
19318 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
19319 apple-80|apple II with smarterm 80 col,
19322 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
19323 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
19324 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
19325 apple-soroc|apple emulating soroc 120,
19328 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19329 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
19330 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19331 # From Peter Harrison, Computer Graphics Lab, San Francisco
19332 # ucbvax!ucsfmis!harrison .....uucp
19333 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
19334 # "These two work. If you don't have the inverse video chip for the
19335 # Apple with videx then remove the :so: and :se: fields."
19336 # (apple-videx: this used to be called DaleApple -- esr)
19337 apple-videx|Apple with videx videoterm 80 column board with inverse video,
19339 cols#80, it#8, lines#24,
19340 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
19341 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19342 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
19343 rmso=^Z2, sgr0=^Z2, smso=^Z3,
19344 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
19345 # Apple Cat ][ 212 modem, + more all
19346 # controlled by ASCII Express: Pro.
19347 # From Dave Shaver <isucs1!shaver>
19348 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
19351 acsc=, clear=^L, cuf1=^\,
19352 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19353 flash=^W35^W06, home=^Y,
19354 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
19356 apple-uterm|Ultraterm for Apple micros,
19359 acsc=, clear=^L, cuf1=^\,
19360 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19361 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
19362 # from trwrba!bwong (Bradley W. Wong):
19364 # This entry assumes that you are using an apple with the UCSD Pascal
19365 # language card. SYSTEM.MISCINFO is assumed to be the same as that
19366 # supplied with the standard apple except that screenwidth should be set
19367 # using SETUP to 80 columns. Note that the right arrow is not mapped in
19368 # this termcap entry. This is because that key, on the Apple, transmits
19369 # a ^U and would thus preempt the more useful "up" function of vi.
19372 apple80p|80-column apple with Pascal card,
19375 clear=^Y^L, cuf1=^\\:,
19376 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19379 # Apple II+ equipped with Videx 80 column card
19381 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
19382 # manually converted by D A Gwyn
19384 # DO NOT use any terminal emulation with this data base, it works directly
19385 # with the Videx card. This has been tested with vi 1200 baud and works fine.
19387 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
19388 # 1 screen, while in R2 ^U doesn't.
19389 # For inverse alternate character set add:
19390 # <smacs>=^O:<rmacs>=^N:
19391 # (apple-v: added it#8 -- esr)
19392 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
19394 cols#80, it#8, lines#24,
19395 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
19396 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
19397 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
19398 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
19399 khome=^Y, rmso=^Z2, smso=^Z3,
19400 apple-videx3|vapple|Apple II with 80 col card,
19403 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
19404 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
19405 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19406 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
19407 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
19408 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
19409 aepro|Apple II+ running ASCII Express Pro--vt52,
19412 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
19413 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19415 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
19416 apple-vm80|ap-vm80|apple with viewmax-80,
19419 clear=\014$<300/>, cuf1=^\\:,
19420 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
19421 ed=\013$<300/>, el=^], home=\031$<200/>,
19423 #### Apple Lisa & Macintosh
19426 # (lisa: changed <cvvis> to <cnorm> -- esr)
19427 lisa|apple lisa console display (black on white),
19428 OTbs, am, eo, msgr,
19429 cols#88, it#8, lines#32,
19430 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
19431 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
19432 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19433 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
19434 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19435 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
19436 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
19437 liswb|apple lisa console display (white on black),
19438 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
19439 smso=\E[m, smul=\E[4m, use=lisa,
19441 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
19442 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
19444 # These entries assume that the 'Auto Wraparound' is enabled.
19445 # Xon-Xoff flow control should also be enabled.
19447 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
19448 # settings are in non-volatile memory and don't need to be reset upon login.
19449 # Also setting the number of columns glitches the screen annoyingly.
19450 # You can type "reset" to get them set.
19452 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
19453 OTbs, OTpt, am, xenl, xon,
19454 OTkn#4, cols#80, it#8, lines#24, vt#3,
19455 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
19456 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19457 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
19458 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19459 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
19460 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
19461 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
19462 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19463 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
19464 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19466 # Lisaterm in 132 column ("wide") mode.
19467 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
19469 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
19470 # Although MacTerminal has insert/delete line, it is commented out here
19471 # since it is much faster and cleaner to use the "lock scrolling region"
19472 # method of inserting and deleting lines due to the MacTerminal implementation.
19473 # Also, the "Insert/delete ch" strings have an extra character appended to them
19474 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
19475 # supported by MacTerminal.
19476 mac|macintosh|Macintosh with MacTerminal,
19479 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
19480 # Lisaterm in 132 column ("wide") mode.
19481 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
19484 #### Radio Shack/Tandy
19487 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
19488 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
19489 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
19490 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
19492 cols#80, it#8, lines#24,
19493 bel=^G, blink=^_", bold=\E\:\001, civis=^E\s,
19494 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
19495 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
19496 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
19497 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
19498 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
19499 # (trs2: removed obsolete ":nl=^_:" -- esr)
19500 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
19502 cols#80, it#8, lines#24,
19503 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
19504 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
19505 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
19506 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
19507 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
19508 # (This had extension capabilities
19509 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
19510 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
19511 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
19512 trs16|trs-80 model 16 console,
19514 cols#80, it#8, lines#24,
19515 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
19516 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19517 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19518 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19519 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19520 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
19521 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
19522 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
19523 smacs=\ERG, smso=\ERD,
19525 #### Commodore Business Machines
19527 # Formerly located in West Chester, PA; went spectacularly bust in 1994
19528 # after years of shaky engineering and egregious mismanagement. Made one
19529 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
19530 # C-128, VIC-20). The C-64 is said to have been the most popular machine
19531 # ever (most units sold); they can still be found gathering dust in closets
19535 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
19536 # Added a few more entries, converted caret-type control sequence (^x) entries
19537 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
19538 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
19540 # :as:, :ae: Support for alternate character sets.
19541 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
19542 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
19543 # This one appears to fix a problem I always had with a line ending
19544 # at 'width+1' (I think) followed by a blank line in vi. The blank
19545 # line tended to disappear and reappear depending on how the screen
19546 # was refreshed. Note that this is probably needed only if you use
19547 # something like a Dnet Fterm with the window sized to some peculiar
19548 # dimension larger than 80 columns.
19549 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
19550 # (amiga: removed obsolete :kn#10:,
19551 # also added empty <acsc> to suppress a warning --esr)
19553 OTbs, am, bw, xenl,
19555 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
19556 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
19557 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
19558 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19559 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19560 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
19561 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
19562 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
19563 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
19564 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
19565 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
19566 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
19567 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19569 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
19570 # (amiga: added empty <acsc> to suppress a warning.
19571 # I'm told this entry screws up badly with AS225, the Amiga
19572 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
19573 amiga-h|Hans Verkuil's Amiga ANSI,
19576 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
19577 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
19578 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
19579 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
19580 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
19581 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
19582 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
19583 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
19584 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
19585 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
19586 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
19587 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
19588 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
19589 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
19590 smso=\2337m, smul=\2334m,
19592 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
19594 # Pavel Fedin added
19599 amiga-8bit|Amiga ANSI using 8-bit controls,
19600 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19601 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
19602 kpp=\233T, ri=\215, rin@, use=amiga-h,
19604 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
19605 # requires use of appropriate preferences settings.
19606 amiga-vnc|Amiga using VNC console (black on light gray),
19607 am, da, db, msgr, ndscr,
19608 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
19609 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
19610 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
19611 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19612 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19613 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19614 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19615 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
19616 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
19617 indn=\E[%p1%dS, invis=\E8m,
19618 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19619 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19620 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
19621 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
19622 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
19623 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
19624 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
19625 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
19626 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19627 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
19628 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
19629 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
19630 smso=\E[1m, smul=\E[4m,
19632 # MorphOS on Genesi Pegasos
19633 # By Pavel Fedin <sonic_amiga@rambler.ru>
19634 morphos|MorphOS on Genesi Pegasos,
19635 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19636 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
19637 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
19638 ri=\215, rin@, use=amiga-h,
19640 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
19641 # I'm trying to write a termcap for a commodore b-128, and I'm
19642 # having a little trouble. I've had to map most of my control characters
19643 # to something that unix will accept (my delete-char is a ctrl-t, etc),
19644 # and create some functions (like cm), but thats life.
19645 # The problem is with the arrow keys - right, and up work fine, but
19646 # left deletes the previous character and down I just can't figure out.
19647 # Jove knows what I want, but I don't know what it's sending to me (it
19648 # isn't thats bound to next-line in jove).
19649 # Anybody got any ideas? Here's my termcap.
19650 # DAG -- I changed his "^n" entries to "\n"; see if that works.
19652 commodore|b-128|Commodore B-128 micro,
19654 OTdN#20, cols#80, lines#24, pb#150,
19655 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
19656 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
19657 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
19658 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
19659 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
19664 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
19665 northstar|North Star Advantage,
19669 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
19670 el=\016$<200/>, home=\034\032$<200/>,
19674 # Thu Jul 7 03:55:16 1983
19676 # As an aside, be careful; it may sound like an anomaly on the
19677 # Osborne, but with the 80-column upgrade, it's too easy to
19678 # enter lines >80 columns!
19680 # I've already had several comments...
19681 # The Osborne-1 with the 80-col option is capable of being
19682 # 52, 80, or 104 characters wide; default to 80 for compatibility
19683 # with most systems.
19685 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
19686 osborne-w|osborne1-w|osborne I in 104-column mode,
19688 cols#104, lines#24,
19689 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19690 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19691 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
19692 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
19693 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
19694 osborne|osborne1|osborne I in 80-column mode,
19695 OTbs, am, mir, msgr, ul, xhp,
19696 OTdB#4, cols#80, lines#24,
19697 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
19698 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19699 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
19700 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
19701 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
19703 # Osborne Executive definition from BRL
19704 # Similar to tvi920
19705 # Added by David Milligan and Tom Smith (SMU)
19706 osexec|Osborne executive,
19708 OTug#1, cols#80, lines#24, xmc#1,
19709 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19710 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19711 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
19712 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
19713 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
19714 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
19715 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
19718 #### Console types for obsolete UNIX clones
19720 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
19721 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
19722 # were commercial, Minix an educational tool sold in conjunction with a book.
19723 # Memory-segmentation limits and a strong tendency to look like V7 long after
19724 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
19725 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
19726 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
19727 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
19728 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
19729 # even as single processes under SunOS and the Macintosh OS.
19733 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
19734 minix|minix console (v3),
19735 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
19736 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
19737 \301w\302x\263y\363z\362{\343|\330}\234~\376,
19738 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
19739 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
19740 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
19741 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
19742 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
19743 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
19744 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
19745 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
19746 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
19747 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
19748 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
19749 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19750 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
19753 minix-3.0|minix console (v3.0),
19754 use=ecma+color, use=minix-1.7,
19757 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
19758 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
19759 minix-1.7|minix console (v1.7),
19761 cols#80, it#8, lines#25,
19762 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19763 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19764 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19765 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19766 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
19767 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19768 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19769 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
19770 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
19771 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
19772 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
19773 smso=\E[7m, smul=\E[4m,
19774 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
19775 minix-old|minix-1.5|minix console (v1.5),
19777 cols#80, it#8, lines#25,
19778 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19779 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19780 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19781 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19782 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
19783 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
19784 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19785 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
19786 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
19787 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
19788 # The linewrap option can be specified by editing /usr/include/minix/config.h
19789 # before recompiling the minix 1.5 kernel.
19790 minix-old-am|minix console with linewrap,
19793 pc-minix|minix console on an Intel box,
19794 use=klone+acs, use=minix-3.0,
19796 # According to the Coherent 2.3 manual, the PC console is similar
19797 # to a z19. The differences seem to be (1) 25 lines, (2) no status
19798 # line, (3) standout is broken, (4) ins/del line is broken, (5)
19799 # has blinking and bold.
19800 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
19802 cols#80, it#8, lines#25,
19803 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19804 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
19805 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
19806 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
19807 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
19809 # According to the Venix 1.1 manual, the PC console is similar
19810 # to a DEC vt52. Differences seem to be (1) arrow keys send
19811 # different strings, (2) enhanced standout, (3) added insert/delete line.
19812 # Note in particular that it doesn't have automatic margins.
19813 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
19814 # not described here because this derives from an old termcap entry.
19815 pc-venix|venix|IBM PC console running Venix,
19816 cols#80, it#8, lines#25,
19817 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19818 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19819 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
19820 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
19822 #### Miscellaneous microcomputer consoles
19824 # If you know anything more about any of these, please tell me.
19827 # The MAI Basic Four computer was obsolete at the end of the 1980s.
19828 # It may be used as a terminal by putting it in "line" mode as seen on
19829 # one of the status lines.
19830 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
19831 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
19832 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
19833 # used \ED instead.
19834 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
19835 mai|basic4|MAI Basic Four in ansi mode,
19836 am, da, db, mir, msgr,
19837 cols#82, it#8, lines#25,
19838 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
19839 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
19840 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
19841 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
19842 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
19843 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
19844 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19845 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
19846 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
19847 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19848 smir=\E[4h, smso=\E[7m, smul=\E[4m,
19849 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
19850 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
19852 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
19853 # The Basis 108 was a Apple II clone, manufactured by the "Basis
19854 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
19855 # about 1,5 km from where I live, but doesn't build own computers any
19856 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
19857 # equipped with one or two 5.25" disk drives, had a monochrome and colour
19858 # video output for a TV set or a dedicated monitor and several slots for
19859 # Apple II cards. Basis 108 were quite popular at german schools before
19860 # the advent of the IBM PC. They run, for example, the UCSD Pascal
19861 # development system (which I used even in 1993 to program the steering
19862 # and data recording for our school's experimental solar panel :), Apple DOS
19864 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
19865 basis|BASIS108 computer with terminal translation table active,
19866 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
19867 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
19868 smso=\E(, use=adm3a,
19869 # luna's BMC terminal emulator
19870 luna|luna68k|LUNA68K Bitmap console,
19871 cols#88, lines#46, use=ansi-mini,
19872 megatek|pegasus workstation terminal emulator,
19875 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
19876 # interface (pre-Macintosh by several years) that went nowhere.
19877 xerox820|x820|Xerox 820,
19880 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19881 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
19884 #### Videotex and teletext
19887 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
19888 # \E[?3l 80 columns
19889 # \E[?4l scrolling on
19890 # \E[12h local echo off
19891 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
19892 # \E)0 G1 DEC set (line graphics)
19894 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
19895 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
19896 OTbs, eslok, hs, xenl,
19897 cols#80, it#8, lines#24, wsl#72, xmc#0,
19898 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
19899 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
19900 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19901 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19902 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19903 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19904 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
19905 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
19906 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
19907 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
19908 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
19909 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19910 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
19911 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
19912 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19913 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
19914 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
19915 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
19916 u6=\E[%i%d;%dR, u7=\E[6n,
19918 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
19920 minitel1|minitel 1,
19921 am, bw, eslok, hs, hz, .msgr, G0,
19922 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
19923 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
19924 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19925 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
19926 dsl=\037@A\030\n, el=^X,
19927 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
19928 home=^^, ind=\n, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
19929 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
19930 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
19931 rev=\E], ri=^K, rmso=\E\\,
19932 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19933 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19934 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
19936 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
19937 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
19938 %tC%e%p1%'@'%+%c%;,
19939 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
19940 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
19941 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
19942 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
19943 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
19944 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
19946 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
19947 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
19948 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
19949 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
19950 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
19951 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
19952 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
19953 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
19954 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
19955 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
19956 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
19957 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
19958 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
19960 minitel1b|minitel 1-bistandard (in 40cols mode),
19962 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
19963 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
19964 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
19965 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
19966 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
19967 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
19968 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
19969 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
19970 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
19971 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
19972 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
19973 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
19974 rmir=\E[4l, smir=\E[4h,
19975 u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
19976 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
19977 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
19978 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
19980 # rmkx posait des problemes (logout en sortant de vi).
19981 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
19982 am@, bw@, eslok@, hz@, msgr, G0,
19983 colors@, cols#80, it#8, pairs@,
19984 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
19985 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
19986 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19987 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
19988 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
19989 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
19990 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
19991 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19992 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
19993 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
19994 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
19996 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
19997 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
19998 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
19999 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
20001 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
20002 smso=\E[7m, smul=\E[4m,
20003 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
20004 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
20005 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
20006 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
20008 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
20009 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
20010 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
20012 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
20014 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
20015 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
20016 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
20017 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
20018 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
20019 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
20020 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
20021 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
20022 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
20023 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
20026 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
20028 bold=\EG, clear=^L\EB,
20029 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
20030 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
20031 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20032 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
20035 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
20038 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
20039 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
20040 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
20041 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
20042 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
20044 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20045 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
20046 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
20047 .u8=\001Cu|\004r, use=minitel1b,
20051 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
20053 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
20054 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
20055 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
20057 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
20058 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
20059 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
20060 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
20062 # Fonctionne par exemple avec Midnight Commander (mc).
20064 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
20066 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
20067 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
20068 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
20070 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20071 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
20072 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
20073 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
20074 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
20075 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
20076 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
20077 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
20078 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
20079 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
20080 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
20081 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
20082 \,+k\,.l\,0\177\,-j,
20085 minitel12-80|minitel 12 (80cols),
20087 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
20089 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
20091 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
20093 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
20094 E0=^O, S0=\E)3\016,
20095 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20096 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
20097 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
20098 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
20099 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
20100 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
20101 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
20102 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
20103 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
20104 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
20105 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
20106 \,\\\,m\,+k\,.l\,0\177\,-j,
20110 # Add these in your ~/.screenrc for inputting some special glyphs like french
20111 # accentuated chars in 40 cols mode:
20113 # bindkey ^YA digraph '`' # Saisi accent grave.
20114 # bindkey ^YB digraph "'" # Saisi accent aigu.
20115 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
20116 # bindkey ^YH digraph '"' # Saisi accent trema.
20118 # bindkey ^Y# stuff \243 # Livre.
20119 # bindkey "^Y\047" stuff \247 # Paragraphe.
20120 # bindkey ^Yj stuff \306 # AE
20121 # bindkey ^Yz stuff \346 # ae
20122 # bindkey ^YKc stuff \347 # c cedille.
20125 screen.minitel1|Screen specific for minitel1,
20127 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
20129 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
20130 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20131 use=xterm+x11mouse, use=screen,
20133 screen.minitel1b|Screen specific for minitel1b,
20134 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
20135 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
20136 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
20137 use=screen.minitel1,
20139 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
20140 colors@, ncv@, pairs@,
20141 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
20142 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
20143 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
20144 use=screen.minitel1b,
20146 screen.minitel1-nb|Screen specific for minitel1-nb,
20147 colors@, ncv@, pairs@,
20148 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20149 use=screen.minitel1,
20151 screen.minitel1b-nb|Screen specific for minitel1b-nb,
20152 colors@, ncv@, pairs@,
20153 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20154 use=screen.minitel1b,
20156 # From: Alexandre Montaron, 29 Sep 2016
20158 linux-m1|Linux Minitel 1 "like" Couleurs,
20159 am, bw@, ccc, mir, msgr, xenl,
20160 colors#8, it#8, ncv#16, pairs#64,
20161 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
20162 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
20163 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20164 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20165 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
20166 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
20167 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
20168 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
20169 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
20170 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
20171 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
20173 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
20174 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
20175 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
20176 kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
20177 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20178 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20179 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
20180 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
20181 khome=\E[1~, kich1=\E[2~, kil1=\E\E[B, kmous=\E[M,
20182 knp=\E[6~, kpp=\E[5~, nel=\EE, oc=\E]R\E]P3FFFF80,
20183 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20184 rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m,
20185 rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7, setab=\E[4%p1%dm,
20186 setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N, smam=\E[?7h,
20187 smir=\E[4h, smpch=\E[11m, smso=\E[7m, tbc=\E[3g,
20188 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
20189 vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
20190 .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
20191 .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
20193 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20194 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20195 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20196 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20197 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20198 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20199 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20200 \n\n\n\n\n\n\n\n\n\n,
20202 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
20203 # 2. Native brown color corrected to good yellow color.
20204 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
20205 # 4. Suppressed nonexistent underlined mode (normally as bright).
20206 # 5. ich/ich1 not filled because of non-curses programs.
20208 # 6. Suppressed nonexistent invisible mode.
20209 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
20211 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
20213 colors@, ncv@, pairs@,
20214 acsc@, bold=\E[33m, enacs@, initc@,
20215 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
20216 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
20217 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20218 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
20219 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
20220 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
20221 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20224 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
20226 colors@, ncv@, pairs@,
20227 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20228 uvvwwxxyyzz{{||}}~~,
20229 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
20230 enacs=\E)0, initc@,
20231 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
20232 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
20233 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
20235 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
20237 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
20238 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
20239 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
20240 \E]PFFFFFFF\E[;37m,
20243 # Screen entries counterpart :
20245 screen.linux-m1|Linux m1 specific for screen,
20247 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
20248 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
20249 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
20250 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20251 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20252 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20253 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20254 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20255 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20256 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20257 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20258 \n\n\n\n\n\n\n\n\n\n,
20259 use=xterm+x11mouse, use=screen,
20261 screen.linux-m1b|Linux m1b specific for screen,
20263 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
20265 screen.linux-m2|Linux m2 specific for screen,
20266 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20267 uvvwwxxyyzz{{||}}~~,
20268 use=screen.linux-m1b,
20272 putty-m1|Putty Minitel 1 "like" Couleurs,
20274 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20275 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20276 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20277 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20278 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1,
20280 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
20282 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20283 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20284 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20285 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20286 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1b,
20288 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
20290 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
20292 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20293 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20294 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20295 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20296 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m2,
20299 screen.putty-m1|Putty m1 specific for screen,
20300 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
20302 screen.putty-m1b|Putty m1b specific for screen,
20304 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
20306 screen.putty-m2|Putty m2 specific for screen,
20307 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20308 uvvwwxxyyzz{{||}}~~,
20309 use=screen.putty-m1b,
20310 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
20313 # viewdata lacks a true cup capability,
20314 # so I achieved it with home and cud1/cuf1 sequences only !
20315 viewdata|prestel/viewdata terminals,
20318 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
20320 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
20321 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
20322 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
20323 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
20324 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
20325 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
20326 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
20328 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
20329 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
20331 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
20332 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
20333 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
20334 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
20335 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
20336 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
20337 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
20338 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
20339 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
20340 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
20341 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
20342 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
20343 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
20344 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
20345 .ll=^^^K, use=viewdata,
20347 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
20349 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
20351 rmso=\EG, smso=\EB, use=viewdata-o,
20353 ######## OBSOLETE VDT TYPES
20355 # These terminals are *long* dead -- these entries are retained for
20356 # historical interest only.
20358 #### Amtek Business Machines
20361 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
20362 # but these caps were commented out in 8.3; also, removed overridden
20363 # ":do=^J:" -- esr)
20364 abm80|amtek business machines 80,
20367 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
20368 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
20369 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
20371 #### Bell Labs blit terminals
20373 # These were AT&T's official entries. The 5620 FAQ maintained by
20374 # David Breneman <daveb@dgtl.com> has this to say:
20376 # Actually, in the beginning was the Jerq, and the Jerq was white with a
20377 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
20378 # was good. But lo, upon the horizon loomed a mighty management-type person
20379 # (known now only by the initials VP) who said, the mighty Jerq must stay
20380 # alone, and could not go forth into the world. So Locanthi and Pike put the
20381 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
20382 # world. And the Jerq lived the rest of its days in research, but never
20383 # strayed from those paths.
20385 # In all seriousness, the Blit was originally known as the Jerq, but when
20386 # it started to be shown outside of the halls of the Bell Labs Research
20387 # organization, the management powers that be decided that the name could
20388 # not remain. So it was renamed to be Blit. This was in late 1981.
20390 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
20394 blit|jerq|blit running teletype rom,
20396 cols#87, it#8, lines#72,
20397 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20398 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
20399 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
20400 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
20401 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
20402 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
20404 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
20405 cbblit|fixterm|blit running columbus code,
20407 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
20408 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
20409 smul=\EU", use=blit,
20411 oblit|ojerq|first version of blit rom,
20412 am, da, db, eo, mir, ul, xon,
20413 cols#88, it#8, lines#72,
20414 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20415 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
20416 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
20417 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
20420 #### Bolt, Beranek & Newman (bbn)
20422 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
20423 # The parent company, best known as the architects of the Internet, is
20426 # Jeff DelPapa <dp@world.std.com> writes:
20427 # The bitgraph was a large white box that contained a monochrome bitmap
20428 # display, and a 68000 to run it. You could download code and run it on
20429 # the cpu, it had 128kb (I think) of memory. I used one in the late
20430 # 70's, sure beat a vt100. It had one strange feature tho -- it used
20431 # the cpu to bitblt pixels to scroll, it took longer than the refresh
20432 # rate, and looked like a rubber sheet stretching, then snapping
20433 # upwards. It had everything the early mac had, except a floppy drive a
20434 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
20435 # Beranek and Neuman) sold at most a few hundred of them to the real
20436 # world. DOD may have bought more...
20439 # Entries for the BitGraph terminals. The problem
20440 # with scrolling in vi can only be fixed by getting BBN to put
20441 # smarter scroll logic in the terminal or changing vi or padding
20442 # scrolls with about 500 ms delay.
20444 # I always thought the problem was related to the terminal
20445 # counting newlines in its input buffer before scrolling and
20446 # then moving the screen that much. Then vi comes along and
20447 # paints lines in on the bottom line of the screen, so you get
20448 # this big white gap.
20450 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
20451 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
20453 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
20454 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
20456 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
20459 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
20460 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
20461 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
20462 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
20463 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20464 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
20465 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
20466 sgr0=\E[m, smkx=\E=, smso=\E[7m,
20468 bg1.25rv|bbn bitgraph 1.25 (reverse video),
20469 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
20471 bg1.25nv|bbn bitgraph 1.25 (normal video),
20472 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
20474 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
20475 bg1.25|bbn bitgraph 1.25,
20477 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
20478 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
20479 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
20480 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
20481 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
20482 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
20483 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
20486 #### Bull (bq, dku, vip)
20488 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
20490 #============================================#
20491 # BULL QUESTAR 210 `SDP' terminals emulation #
20492 #============================================#
20494 # Description written by R.K.Saunders (Bull Transac)
20496 # Modifications written by F. Girard (Bull MTS)
20497 # 19-05-87 V02.00.01
20498 # 17-12-87 V02.00.02
20499 # 15-09-89 V02.00.05
20501 # Typical technical selections F1 (modes SDP/ROLL):
20502 # -------------------------------------------------------
20503 # | 01 02 03 04 05 06 07 08 09 10 |
20504 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
20506 # | 11 12 13 14 15 16 17 18 19 20 |
20507 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
20509 # | 21 22 23 24 25 26 27 28 29 30 |
20510 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
20512 # | 31 32 33 34 35 36 37 38 39 40 |
20513 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
20514 # -------------------------------------------------------
20515 # Typical firmware identification F5 "etat 6":
20516 # P287.02.04b (AZERTY)
20517 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
20518 # P298.03.03 (monochrome) or P374.03.02 (colour)
20520 # SM SDP mode (VIP command): ^[[?=h
20521 # RIS (erases screen): ^[c
20522 # DMI disable keyboard: ^[`
20523 # SM double rendition mode: ^[[?>h
20524 # RM solicited status mode: ^[[5l
20525 # RM character mode: ^[[>l
20526 # RM echoplex mode: ^[[12l
20527 # RM column tab mode: ^[[18l
20528 # RM forbid SS2 keyboard mode: ^[[?<l
20529 # SM scroll mode: ^[[=h
20530 # FCF enable XON/XOFF: ^[P1s^[\
20531 # MTL select end msg character: ^[[^Wp
20532 # EMI enable keyboard: ^[b
20533 # RIS retour etat initial: ^[c
20534 # enable FC keypad: ^[[?<h,
20535 # MPW map status line window: ^[PY99:98^[\
20536 # SCP select status line: ^[[0;98v
20537 # ED erase entire partition: ^[[2J
20538 # SCP select main partition: ^[[v
20539 # SM character insertion mode: ^[[4h
20540 # RM character replacement mode: ^[[4l
20541 # COO cursor on: ^[[r
20542 # COO cursor off: ^[[1r
20543 # SGR dim (turquoise) rev attr: ^[[2;7m
20544 # SGR Data normal attr: ^[[m
20545 # SO Line-graphic mode ON: ^N
20546 # SI Line-graphic mode OFF: ^O
20547 # MC start routing to printer: ^[[5i
20548 # MC stop routing to printer: ^M^[[4i
20551 # This entry covers the following terminals:
20552 # dku7102, tws2102, and tws models 2105 to 2112
20553 tws-generic|dku7102|Bull Questar tws terminals,
20554 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
20555 cols#80, it#8, lines#24, wsl#80,
20556 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
20557 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
20558 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
20559 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
20560 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20561 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
20562 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
20563 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
20564 il1=\E[L, ind=\n, invis=\E[0;8m,
20565 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
20566 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
20567 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
20568 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
20569 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
20570 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
20571 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
20572 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
20573 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
20574 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
20575 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
20576 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
20577 %p7%t;8%;m%?%p9%t\016%e\017%;,
20578 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
20579 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
20580 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
20581 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
20582 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
20584 tws2103|xdku|BULL Questar tws2103,
20585 ht=^I, use=tws-generic,
20586 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
20587 ht=^I, use=tws2102-sna,
20588 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
20589 clear=\E[2J\E[H, cup@, dl@, dl1@,
20590 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
20591 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
20593 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
20594 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
20595 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
20596 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
20597 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
20599 #=========================================================#
20600 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
20601 #=========================================================#
20603 # Description written by J. Staerck (BULL SA)
20604 # Copyright (c) 1989 BULL SA
20605 #---------------------------------------------------------------------------
20606 # This entry is used for terminals with vt320 emulation mode
20607 # and following set-up :
20608 # 8 bit ISO Latin Character Set (ISO 8859-1),
20609 # 7 bit Control Characters,
20610 # 80 columns screen.
20611 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
20612 # They are used in string capabilities with vt220-320 emulation mode.
20613 # In the following DEC definitions, two kinds of terminfo databases are
20615 # 1. the first with Command Sequence Introducer starting with escape
20616 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
20617 # 2. the second with Command Sequence Introducer starting with escape
20618 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
20619 # Soft Terminal Reset esc [ ! p
20620 # RIS (erases screen): esc c
20621 # DECKPNM numeric keypad mode: esc >
20622 # DECKPAM applic. keypad mode: esc =
20623 # DECSTBM Scrolling region: esc [ r
20624 # SCS select G0 = US: esc ( B
20625 # SCS select G1 = line-graphic: esc ) 0
20626 # Select 7-bit C1 controls: esc sp F
20627 # Select 8-bit C1 controls: esc sp G
20628 # Select cursor home: esc [ H
20629 # Select erase screen: esc [ J
20630 # SM KAM lock keyboard: esc [ 2 h
20631 # RM KAM unlock keyboard: esc [ 2 l
20632 # SM SRM local echo off: esc [ 1 2 h
20633 # RM SRM local echo on: esc [ 1 2 l
20634 # SM LNM New line : esc [ 2 0 h
20635 # RM LNM return = CR only: esc [ 2 0 l
20636 # SM DECCKM cursor keys mode: esc [ ? 1 h
20637 # RM DECCKM appli. keys mode: esc [ ? 1 l
20638 # SM DECANM ANSI mode on: esc [ ? 2 h
20639 # RM DECANM ANSI mode off: esc [ ? 2 l
20640 # SM DECCOLM 132-column screen: esc [ ? 3 h
20641 # RM DECCOLM 80-column screen: esc [ ? 3 l
20642 # SM DECSCLM Smooth scroll: esc [ ? 4 h
20643 # RM DECSCLM Jump scroll: esc [ ? 4 l
20644 # SM DECSCNM screen light backgr. esc [ ? 5 h
20645 # RM DECSCNM screen dark backgr. esc [ ? 5 l
20646 # SM DECOM move within margins: esc [ ? 6 h
20647 # RM DECOM move outside margins: esc [ ? 6 l
20648 # SM DECAWM auto right margin: esc [ ? 7 h
20649 # RM DECAWM auto right margin: esc [ ? 7 l
20650 # SM DECARM auto repeat: esc [ ? 8 h
20651 # RM DECARM auto repeat: esc [ ? 8 l
20652 # DECSASD Select active main: esc [ 0 $ }
20653 # DECSASD Select active status: esc [ 1 $ }
20654 # DECSSDT Select status none: esc [ 0 $ ~
20655 # DECSSDT Select status indic.: esc [ 1 $ ~
20656 # DECSSDT Select status host-wr: esc [ 2 $ ~
20657 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
20658 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
20659 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
20660 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
20661 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
20662 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
20663 # SM DECKBUM clavier informatique esc [ ? 6 8 h
20664 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
20665 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
20666 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
20667 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
20668 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
20669 # Char. and Line attributes: esc [ Ps ... Ps m
20670 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20671 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20674 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
20675 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
20676 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
20677 cols#80, it#8, lines#24, vt#3, wsl#80,
20678 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20679 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20680 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20681 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20682 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20683 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20684 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20685 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
20686 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
20687 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
20688 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
20689 is1=\E[63;1"p\E[2h,
20690 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20692 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
20693 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
20694 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
20695 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20696 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20697 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
20698 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
20699 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20700 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
20701 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
20702 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
20703 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
20705 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20706 %;m%?%p9%t\E(0%e\E(B%;,
20707 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
20708 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
20709 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
20710 bq300-rv|Bull vt320 reverse 80 columns,
20711 flash=\E[?5l$<50>\E[?5h,
20712 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20715 bq300-w|Bull vt320 132 columns,
20717 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20719 rs2=\E[?3h, use=bq300,
20720 bq300-w-rv|Bull vt320 reverse mode 132 columns,
20722 flash=\E[?5l$<50>\E[?5h,
20723 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20725 rs2=\E[?3h, use=bq300,
20727 # This entry is used for terminals with vt320 emulation mode
20728 # and following set-up :
20729 # 8 bit ISO Latin Character Set (ISO 8859-1),
20730 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
20731 # 80 columns screen.
20732 # Soft Terminal Reset csi ! p
20733 # RIS (erases screen): esc c
20734 # DECKPNM numeric keypad mode: esc >
20735 # DECKPAM applic. keypad mode: esc =
20736 # DECSTBM Scrolling region: esc [ r
20737 # SCS select G0 = US: esc ( B
20738 # SCS select G1 = line-graphic: esc ) 0
20739 # Select 7-bit C1 controls: esc sp F
20740 # Select 8-bit C1 controls: esc sp G
20741 # Select cursor home: csi H
20742 # Select erase screen: csi J
20743 # SM KAM lock keyboard: csi 2 h
20744 # RM KAM unlock keyboard: csi 2 l
20745 # SM SRM local echo off: csi 1 2 h
20746 # RM SRM local echo on: csi 1 2 l
20747 # SM LNM New line : csi 2 0 h
20748 # RM LNM return = CR only: csi 2 0 l
20749 # SM DECCKM cursor keys mode: csi ? 1 h
20750 # RM DECCKM appli. keys mode: csi ? 1 l
20751 # SM DECANM ANSI mode on: csi ? 2 h
20752 # RM DECANM ANSI mode off: csi ? 2 l
20753 # SM DECCOLM 132-column screen: csi ? 3 h
20754 # RM DECCOLM 80-column screen: csi ? 3 l
20755 # SM DECSCLM Smooth scroll: csi ? 4 h
20756 # RM DECSCLM Jump scroll: csi ? 4 l
20757 # SM DECSCNM screen light backgr. csi ? 5 h
20758 # RM DECSCNM screen dark backgr. csi ? 5 l
20759 # SM DECOM move within margins: csi ? 6 h
20760 # RM DECOM move outside margins: csi ? 6 l
20761 # SM DECAWM auto right margin: csi ? 7 h
20762 # RM DECAWM auto right margin: csi ? 7 l
20763 # SM DECARM auto repeat: csi ? 8 h
20764 # RM DECARM auto repeat: csi ? 8 l
20765 # DECSASD Select active main: csi 0 $ }
20766 # DECSASD Select active status: csi 1 $ }
20767 # DECSSDT Select status none: csi 0 $ ~
20768 # DECSSDT Select status indic.: csi 1 $ ~
20769 # DECSSDT Select status host-wr: csi 2 $ ~
20770 # SM DECTCEM Visible cursor: csi ? 2 5 h
20771 # RM DECTCEM Invisible cursor: csi ? 2 5 l
20772 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
20773 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
20774 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
20775 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
20776 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
20777 # Char. and Line attributes: csi Ps ... Ps m
20778 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20779 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20780 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
20781 bq300-8|Bull vt320 full 8 bits 80 columns,
20782 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
20783 cols#80, it#8, lines#24, vt#3, wsl#80,
20784 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20785 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
20786 clear=\233H\233J, cnorm=\233?25h, cr=\r,
20787 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
20788 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
20789 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
20790 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
20791 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
20792 el=\233K, el1=\2331K, enacs=\E(B\E)0,
20793 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
20794 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
20795 ind=\ED, is1=\E[63;2"p\E[2h,
20796 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20798 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
20799 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
20800 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20801 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
20802 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
20803 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
20804 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
20805 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
20806 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
20807 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
20808 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
20809 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
20810 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
20811 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
20812 s0ds=\E(B, s1ds=\E(0, sc=\E7,
20813 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
20814 1%;m%?%p9%t\E(0%e\E(B%;,
20815 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
20816 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
20817 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
20818 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
20819 flash=\233?5l$<50>\233?5h,
20820 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20823 bq300-8w|Bull vt320 8-bit 132 columns,
20825 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20827 rs2=\233?3h, use=bq300-8,
20828 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
20830 flash=\233?5l$<50>\233?5h,
20831 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20833 rs2=\233?3h, use=bq300-8,
20835 # This entry is used for terminals with vt320 emulation mode
20836 # a 102 keys keyboard (PC scancode !) and following set-up :
20837 # 8 bit ISO Latin Character Set (ISO 8859-1),
20838 # 7 bit Control Characters,
20839 # 80 columns screen.
20840 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
20841 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
20842 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
20843 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
20844 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20845 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20846 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
20847 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
20848 flash=\E[?5l$<50>\E[?5h,
20849 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20852 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
20854 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20856 rs2=\E[?3h, use=bq300-pc,
20857 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
20859 flash=\E[?5l$<50>\E[?5h,
20860 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20862 rs2=\E[?3h, use=bq300-pc,
20863 # 8 bit ISO Latin Character Set (ISO 8859-1),
20864 # 8 bit Control Characters,
20865 # 80 columns screen.
20866 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
20867 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
20868 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
20869 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
20870 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20871 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
20872 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
20873 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
20874 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
20875 flash=\E[?5l$<50>\E[?5h,
20876 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20879 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
20881 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20883 rs2=\E[?3h, use=bq300-8-pc,
20884 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
20886 flash=\E[?5l$<50>\E[?5h,
20887 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20889 rs2=\E[?3h, use=bq300-8-pc,
20891 #======================================================#
20892 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
20893 #======================================================#
20895 # normal mode, 8 bits, 80 columns terminal.
20897 # RIS reset initial state: ^[c
20898 # BLE bell enable ^[h
20899 # BLD bell disable ^[g
20900 # CAMS char. attr. mode set ^[[D
20901 # CAMR char. attr. mode reset ^[[G
20903 # KBU keyboard unlock (set) ^[[W
20904 # KBL keyboard lock (reset) ^[[X
20905 # CM character mode (async.) ^[k
20906 # NEP non echoplex mode (by host) ^[l
20907 # EP echoplex mode (by host) ^[m
20908 # IM insert mode set ^[[I
20909 # IM insert mode reset ^[[J
20910 # RMS roll mode set ^[r
20911 # RMR roll mode reset ^[q
20912 # SM78 set mode vip7800 ^[[1q
20913 # SD scroll up (72 lines) ^[[0s
20914 # SD scroll down (72 lines) ^[[1s
20915 # RBM block mode reset ^[[E
20916 # SLS status line set ^[w
20917 # SLR status line reset ^[v
20918 # SLL status line lock ^[O
20919 # LGS Line-graphic mode set ^[G
20920 # LGR Line-graphic mode reset ^[F
20921 # TBC tab clear (at cursor pos.) ^[[g
20922 # TBI tab initialize ^[[N
20923 # TBS tab set (at cursor pos.) ^[p
20924 # PDS print data space ^[[0p
20925 # PHD print host data ^[[3p
20926 # PDT print data terminator ^[[<p
20927 # PRES print adapter reset ^[[2p
20928 # SSPR multi-part. reset ^[[<>u
20929 # SSP0 partition 0 set ^[[00u
20930 # SSP1 partition n format 1 ^[[PnPnSTRINGu
20931 # SSP2 partition n format 2 ^[[PnPnSTRINGu
20932 # SSP3 partition n format 3 ^[[PnPnu
20933 # ATR attribute (visual)
20936 # hide (blank) : ^[sH
20938 # inverse video : ^[sI
20943 # This covers the vip7800 and BQ3155-vip7800
20944 vip|Bull Questar 3155-7800,
20945 am, eslok, hs, km, mc5i, msgr, xenl, xon,
20946 cols#80, it#8, lines#24, vt#3, wsl#80,
20947 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
20948 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20949 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
20950 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
20951 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
20952 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
20953 is2=\E[00u\E[<>001001024080024080u\E[01u,
20954 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
20955 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
20956 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
20957 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
20958 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
20959 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
20960 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
20961 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
20962 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
20963 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
20964 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
20965 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
20966 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
20967 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
20968 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
20969 smul=\Es_, tbc=\E[N, tsl=\Ew,
20970 # normal screen, 8 bits, 132 columns terminal.
20971 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
20973 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
20974 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
20976 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
20977 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
20978 cols#132, lines#72, wsl#132,
20979 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
20984 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
20985 # that is smaller than the screen, and puts up a warning message
20986 # outside the window. Te erases the warning message, puts the
20987 # window back to be the whole screen, and puts the cursor at just
20988 # below the small window. I defined <cnorm> and <civis> to really turn
20989 # the cursor on and off, but I have taken this out since I don't
20990 # like the cursor being turned off when vi exits.
20991 cg7900|chromatics|chromatics 7900,
20994 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
20995 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
20996 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
20997 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
20999 rmso=\001C1\,\001c2\,,
21000 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
21001 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
21002 \001W0\,0\,79\,39\,,
21003 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
21005 #### Computer Automation
21008 ca22851|computer automation 22851,
21011 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
21012 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
21013 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
21018 # This entry has correct padding and the undocumented "ri" capability
21019 cyb83|xl83|cybernex xl-83,
21022 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21023 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
21024 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
21025 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
21026 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
21027 cyb110|mdl110|cybernex mdl-110,
21030 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
21031 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
21032 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
21033 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
21034 ht=\011$<43>, ich1=\016A\035$<3.5>,
21035 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
21039 # Datapoint is gone. They used to be headquartered in Texas.
21040 # They created ARCnet, an Ethernet competitor that flourished for a while
21041 # in the early 1980s before 3COM got wise and cut its prices. The service
21042 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
21045 dp3360|datapoint|datapoint 3360,
21048 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
21049 ed=^_, el=^^, home=^], ind=\n,
21051 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
21052 # The Datapoint 8242 Workstation was sold at least between 1985
21053 # and 1989. To make the terminal work with this entry, press
21054 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
21055 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
21056 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
21057 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
21058 # fact unusable because the strings sent by the terminal conflict
21059 # with other keys).
21060 # The terminal is capable of displaying "box draw" characters.
21061 # For each graphic character you must send 2 ESC's (\E\E) followed
21062 # by a control character as follows:
21063 # character meaning
21064 # ========= =======
21067 # ctrl-G bottom tee
21070 # ctrl-J top left corner
21071 # ctrl-K top right corner
21072 # ctrl-L bottom left corner
21073 # ctrl-M bottom right corner
21074 # ctrl-N horizontal line
21075 # ctrl-O vertical line
21076 # Unfortunately this cannot be fitted into the termcap/terminfo
21077 # description scheme.
21078 dp8242|datapoint 8242,
21081 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
21082 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
21083 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
21084 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21085 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
21086 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
21087 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
21088 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
21089 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21090 smso=\E^E, smul=\E^F,
21091 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
21094 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
21096 # These entries are DEC's official terminfos for its older terminals.
21097 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
21098 # Engineering for more information. Updated terminfos and termcaps
21099 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
21105 bel=^G, cr=\r, cub1=^H, cud1=\n,
21109 bel=^G, cr=\r, cub1=^H, cud1=\n,
21113 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21114 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n,
21118 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21119 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21120 el=\EK, ht=^I, ind=\n, ri=\EI,
21121 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
21122 vt61|vt-61|vt61.5|dec vt61,
21124 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
21125 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
21126 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
21127 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
21130 # The gigi does standout with red!
21131 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
21132 gigi|vk100|dec gigi graphics terminal,
21135 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
21136 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21137 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
21138 el=\E[K, ht=^I, ind=\n,
21139 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
21140 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
21141 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
21142 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21143 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
21146 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
21147 # a PC differentiated from the IBM clones. It was a total, ludicrous,
21148 # grossly-overpriced failure (among other things, DEC's OS didn't include
21149 # a format program, so you had to buy pre-formatted floppies from DEC at
21150 # a hefty premium!).
21151 pro350|decpro|dec pro console,
21153 cols#80, it#8, lines#24,
21154 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21155 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
21156 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21157 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21158 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
21159 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
21160 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
21165 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
21166 dw2|decwriter|dw|decwriter II,
21169 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
21170 # \E(B Use U.S. character set (otherwise # => british pound !)
21171 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
21172 # \E[w 10 char/in pitch
21173 # \E[1;132 full width horizontal margins
21174 # \E[2g clear all tab stops
21176 # \E[66t 66 lines/page (for \f)
21177 # \E[1;66r full vertical page can be printed
21178 # \E[4g clear vertical tab stops
21179 # \E> disable alternate keypad mode (so it transmits numbers!)
21180 # \E[%i%p1%du set tab stop at column %d (origin == 1)
21181 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
21184 # The dw3 does standout with wide characters.
21186 dw3|la120|decwriter III,
21189 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
21190 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
21191 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
21193 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
21197 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
21198 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
21200 # These aren't official
21201 ln03|dec ln03 laser printer,
21204 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
21205 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
21207 ln03-w|dec ln03 laser printer 132 cols,
21209 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
21210 kcud1=\n, nel=\r\n, use=ln03,
21212 #### Delta Data (dd)
21215 # Untested. The cup sequence is hairy enough that it probably needs work.
21216 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
21217 # There are BSD-derived termcap entries floating around for this puppy
21218 # that are *certainly* wrong.
21219 delta|dd5000|delta data 5000,
21222 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
21223 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
21225 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
21227 #### Digital Data Research (ddr)
21230 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
21231 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
21233 cols#80, it#8, lines#24, vt#3,
21234 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
21235 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
21236 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
21237 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
21238 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
21239 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
21240 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
21241 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
21242 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
21243 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
21244 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
21247 #### Evans & Sutherland
21250 # Jon Leech <leech@cs.unc.edu> tells us:
21251 # The ps300 was the Evans & Sutherland Picture System 300, a high
21252 # performance 3D vector graphics system with a bunch of specialized hardware.
21253 # Approximate date of release was 1982 (early 80s, anyway), and it had several
21254 # evolutions including (limited) color versions such as the PS330C. PS300s
21255 # were effectively obsolete by the late 80s, replaced by raster graphics
21256 # systems, although specialized applications like molecular modeling
21257 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
21258 # are out of production, though of course E&S is very much alive (in 1996).
21259 # (ps300: changed ":pt@:" to "it@" -- esr)
21261 ps300|Picture System 300,
21264 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
21266 #### General Electric (ge)
21269 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
21272 bel=^G, cr=\r, cud1=\n, ind=\n,
21274 #### Heathkit/Zenith
21277 # Here is a description of the H19 DIP switches:
21280 # 0-3 = baud rate as follows:
21285 # 0 1 0 1 1200 baud
21286 # 1 0 0 0 2400 baud
21287 # 1 0 1 0 4800 baud
21288 # 1 1 0 0 9600 baud
21289 # 1 1 0 1 19.2K baud
21291 # 4 = parity (0 = no parity)
21292 # 5 = even parity (0 = odd parity)
21293 # 6 = stick parity (0 = normal parity)
21294 # 7 = full duplex (0 = half duplex)
21297 # 0 = block cursor (0 = underscore cursor)
21298 # 1 = no key click (0 = keyclick)
21299 # 2 = wrap at end of line (0 = no wrap)
21300 # 3 = auto LF on CR (0 = no LF on CR)
21301 # 4 = auto CR on LF (0 = no CR on LF)
21302 # 5 = ANSI mode (0 = VT52 mode)
21303 # 6 = keypad shifted (0 = keypad unshifted)
21304 # 7 = 50Hz refresh (1 = 60Hz refresh)
21306 # Factory Default settings are as follows:
21308 # S401 1 0 0 0 1 1 0 0
21309 # S402 0 0 0 0 0 0 0 0
21310 # (h19: I added <rmam>/<smam> based on the init string;
21311 # also added empty <acsc> to suppress a tic warning -- esr)
21312 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
21313 OTbs, am, mir, msgr,
21314 cols#80, it#8, lines#24,
21315 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
21316 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
21317 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
21318 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
21319 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
21320 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
21321 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
21322 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
21323 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
21324 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
21325 h19-bs|heathkit w/keypad shifted,
21326 rmkx=\Eu, smkx=\Et, use=h19-b,
21327 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
21328 rmkx=\Eu, smkx=\Et, use=h19-u,
21329 # (h19: merged in <ip> from BSDI hp19-e entry>;
21330 # also added empty <acsc> to suppress a tic warning --esr)
21331 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
21332 # Tim tells us that:
21333 # I have an old Zenith-19 terminal at home that still gets a lot of use.
21334 # This terminal suffers from the same famous insert-mode padding lossage
21335 # that has been acknowledged for the Z29 terminal. Emacs is nearly
21336 # unusable on this box, since even a half-scroll up or down the window
21337 # causes flaming terminal death.
21339 # On the Z19, the only way I have found around this problem is to remove
21340 # the :al: and :dl: entries entirely. No amount of extra padding will
21341 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
21342 # makes Emacs a little slower, but it remains in the land of the living.
21344 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
21345 OTbs, am, eslok, hs, mir, msgr,
21346 cols#80, it#8, lines#24,
21347 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
21348 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21349 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
21350 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
21351 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21352 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
21353 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
21354 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21355 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
21356 h19-u|heathkit with underscore cursor,
21357 cnorm@, cvvis@, use=h19-b,
21358 h19-g|h19g|heathkit w/block cursor,
21359 cnorm=\Ex4, cvvis@, use=h19-b,
21360 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
21362 dl1=\EM, il1=\EL, use=h19,
21364 # The major problem with the Z29 is that it requires more padding than the Z19.
21366 # The problem with declaring an H19 to be synonymous with a Z29 is that
21367 # it needs more padding. It especially loses if a program attempts
21368 # to put the Z29 into insert mode and insert text at 9600 baud. It
21369 # even loses worse if the program attempts to insert tabs at 9600
21370 # baud. Adding padding to text that is inserted loses because in
21371 # order to make the Z29 not die, one must add so much padding that
21372 # whenever the program tries to use insert mode, the effective
21373 # rate is about 110 baud.
21375 # What program would want to put the terminal into insert mode
21376 # and shove stuff at it at 9600 baud you ask?
21378 # Emacs. Emacs seems to want to do the mathematically optimal
21379 # thing in doing a redisplay rather than the practical thing.
21380 # When it is about to output a line on top of a line that is
21381 # already on the screen, instead of just killing to the end of
21382 # the line and outputting the new line, it compares the old line
21383 # and the new line and if there are any similarities, it
21384 # constructs the new line by deleting the text on the old line
21385 # on the terminal that is already there and then inserting new
21386 # text into the line to transform it into the new line that is
21387 # to be displayed. The Z29 does not react kindly to this.
21389 # But don't cry for too long.... There is a solution. You can make
21390 # a termcap entry for the Z29 that says the Z29 has no insert mode.
21391 # Then Emacs cannot use it. "Oh, no, but now inserting into a
21392 # line will be really slow", you say. Well there is a sort of a
21393 # solution to that too. There is an insert character option on
21394 # the Z29 that will insert one character. Unfortunately, it
21395 # involves putting the terminal into ansi mode, inserting the
21396 # character, and changing it back to H19 mode. All this takes 12
21397 # characters. Pretty expensive to insert one character, but it
21398 # works. Either Emacs doesn't try to use its inserting hack when
21399 # it's only given an insert character ability or the Z29 doesn't
21400 # require padding with this (the former is probably more likely,
21401 # but I haven't checked it out).
21402 # (z29: added empty <acsc> to suppress a tic warning, merged in
21403 # status line capabilities from BRL entry --esr)
21404 z29|zenith29|z29b|zenith z29b,
21405 OTbs, OTpt, am, eslok, hs, mir, msgr,
21406 OTkn#10, cols#80, lines#24,
21407 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
21408 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21409 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
21410 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
21411 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
21412 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
21413 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21414 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
21415 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
21416 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
21417 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
21418 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21419 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
21420 # the world is stable. <rs1> causes the terminal to be reset to the state
21421 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
21422 # cursor, bc -> block cursor.
21423 # From: Mike Meyers
21424 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
21425 # looks vt100-compatible -- esr)
21426 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
21427 OTbs, OTpt, am, eslok, hs, mir, msgr,
21428 OTkn#10, cols#80, it#8, lines#24,
21429 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
21430 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21431 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21432 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21433 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
21434 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
21435 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
21436 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
21437 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
21438 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
21439 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
21440 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
21441 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
21442 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
21444 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
21445 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
21446 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
21447 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
21450 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
21451 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
21454 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
21455 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
21458 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
21459 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
21460 am, eslok, hs, mc5i, mir, msgr, xon,
21462 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
21463 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
21464 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
21465 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21466 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
21467 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21468 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
21469 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
21470 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
21471 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
21472 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
21473 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
21474 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
21475 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
21476 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
21477 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
21478 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
21479 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21480 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
21482 # From: Brad Brahms <Brahms@USC-ECLC>
21483 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
21484 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
21485 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
21486 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
21487 OTbs, OTpt, mir, msgr,
21488 OTkn#10, cols#80, it#8, lines#24,
21489 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
21490 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
21491 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
21492 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
21493 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
21494 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
21495 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
21496 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21497 smir=\E@, smso=\Ep,
21498 p19|h19-b with il1/dl1,
21499 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
21500 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
21501 # (ztx: removed duplicate :sr: -- esr)
21502 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
21503 OTbs, am, eslok, hs,
21504 cols#80, it#8, lines#24,
21505 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
21506 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21507 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
21508 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
21509 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
21510 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
21511 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
21512 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21514 #### IMS International (ims)
21516 # There was a company called IMS International located in Carson City,
21517 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
21518 # bus/Z80 hardware and a line of terminals called Ultimas.
21521 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
21522 ims950-b|bare ims950 no init string,
21524 # (ims950: removed obsolete ":ko@:" -- esr)
21525 ims950|ims televideo 950 emulation,
21527 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21528 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
21529 # (ims950-rv: removed obsolete ":ko@:" -- esr)
21530 ims950-rv|ims tvi950 rev video,
21532 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21533 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
21534 ims-ansi|ultima2|ultimaII|IMS Ultima II,
21536 cols#80, it#8, lines#24,
21537 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
21538 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
21539 ht=^I, if=/usr/share/tabset/vt100,
21540 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
21541 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
21542 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
21545 #### Intertec Data Systems
21547 # I think this company is long dead as of 1995. They made an early CP/M
21548 # micro called the "Intertec Superbrain" that was moderately popular,
21549 # then sank out of sight.
21552 superbrain|intertec superbrain,
21555 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
21556 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
21557 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
21558 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
21559 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
21560 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
21561 # and the reverse is actually true. Try it. -- esr)
21562 intertube|intertec|Intertec InterTube,
21565 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
21566 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
21567 ind=\n, rmso=\E0@, smso=\E0P,
21568 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
21569 # are typing and a command comes in, the keystrokes you type get interspersed
21570 # with the command and it messes up
21571 intertube2|intertec data systems intertube 2,
21573 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
21574 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
21575 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
21577 #### Ithaca Intersystems
21579 # This company made S100-bus personal computers long ago in the pre-IBM-PC
21580 # past. They used to be reachable at:
21582 # Ithaca Intersystems
21583 # 1650 Hanshaw Road
21584 # Ithaca, New York 14850
21586 # However, the outfit went bankrupt years ago.
21589 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
21590 # These entries were written (originally in termcap syntax) by Brian Yandell
21591 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
21592 # University of Wisconsin.
21594 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
21595 # removed <if=/usr/share/tabset/init.graphos> and
21596 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
21597 graphos|graphos III,
21599 cols#80, it#8, lines#24,
21600 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
21601 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21602 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21603 cuu=\E[%p1%dA, cuu1=\E[A,
21604 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
21605 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
21606 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21607 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
21608 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
21609 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
21610 smir=\E[4h, smso=\E[7m,
21611 graphos-30|graphos III with 30 lines,
21613 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
21617 # These people used to be reachable at:
21620 # 1393 Main Street,
21621 # Waltham, MA 02154
21622 # Vox: (617)-890-5796.
21624 # However, if you call that number today you'll get an insurance company.
21625 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
21626 # 26 Feb 1997 that says:
21628 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
21629 # for ~7 years. Modgraph still in business. Products are rugged laptop and
21630 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
21631 # panel-mount etc). I can be emailed at sonfour@aol.com
21633 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
21634 # dated 1984. According to the manual, it featured Tek 4010/4014
21635 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
21638 modgraph|mod24|modgraph terminal emulating vt100,
21641 cvvis=\E\^9;0s\E\^7;1s,
21642 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
21643 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
21644 \E\^11;81s\E\^11;89s,
21645 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
21646 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
21647 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
21649 cols#80, it#8, lines#24,
21650 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
21651 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
21652 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
21653 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
21654 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
21655 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
21656 1s\E\^9;1s\E\^27;1,
21659 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
21660 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
21661 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
21662 # mark and using delete-to-killbuffer work correctly. However, we would
21663 # like normal mode of operation to be using a Modgraph with 48 line setting.
21664 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
21665 # the setting mark and delete-to-killbuffer results in the deletion of only
21666 # the line the mark is set on.
21667 # We've discovered that the delete-to-killbuffer works correctly
21668 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
21669 # the first line disappears but a ctrl-l shows that it did work
21671 modgraph48|mod|Modgraph w/48 lines,
21672 OTbs, OTpt, am, xenl,
21673 cols#80, it#8, lines#48, vt#3,
21674 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
21675 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21676 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
21677 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
21678 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
21679 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21680 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
21681 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21682 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
21683 smso=\E[7m, smul=\E[4m,
21685 #### Morrow Designs
21687 # This was George Morrow's company. They started in the late 1970s making
21688 # S100-bus machines. They used to be reachable at:
21691 # 600 McCormick St.
21692 # San Leandro, CA 94577
21694 # but they're long gone now (1995).
21697 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
21698 # Jeff's specimen was dated June 1984.
21699 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
21700 mt70|mt-70|Morrow MD-70; native Morrow mode,
21701 am, mir, msgr, xon,
21702 cols#80, it#8, lines#24,
21703 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
21704 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
21705 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
21706 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
21707 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
21708 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
21709 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
21710 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
21711 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
21712 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
21713 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21714 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
21715 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
21716 smul=\EG1, tbc=\E0, use=adm+sgr,
21721 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
21723 ex155|Motorola Exorterm 155,
21725 OTkn#5, OTug#1, cols#80, lines#24,
21726 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
21727 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
21728 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
21729 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
21730 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
21734 # This company is still around in 1995, manufacturing point-of-sale systems.
21736 omron|Omron 8025AG,
21739 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
21740 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
21741 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
21745 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
21746 # were competition for things like the Tektronix 4025.
21749 # Ramtek 6221 from BRL, probably by Doug Gwyn
21750 # The following SET-UP modes are assumed for normal operation:
21751 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
21752 # NEWLINE_OFF 80_COLUMNS
21753 # Other SET-UP modes may be set for operator convenience or communication
21754 # requirements; I recommend
21755 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
21756 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
21757 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
21758 # Note that the Control-E key is useless on this brain-damaged terminal. No
21759 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
21760 rt6221|Ramtek 6221 80x24,
21761 OTbs, OTpt, msgr, xon,
21762 OTkn#4, cols#80, it#8, lines#24, vt#3,
21763 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
21764 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
21765 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21766 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
21767 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
21768 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
21769 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21770 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
21771 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
21772 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
21773 rmso=\E[m, rmul=\E[m,
21774 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
21775 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
21777 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
21778 smul=\E[4m, tbc=\E[3g,
21779 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
21780 rt6221-w|Ramtek 6221 160x48,
21781 cols#160, lines#48,
21782 ll=\E[48;1H, use=rt6221,
21787 # RCA VP3301 or VP3501
21788 rca|rca vp3301/vp3501,
21791 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21792 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
21798 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
21799 # The following SET-UP modes are assumed for normal operation:
21800 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
21801 # ONLINE ANSI CURSOR_VISIBLE
21802 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
21803 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
21804 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
21805 # For use with graphics software, all graphics modes should be set to factory
21806 # default. Other SET-UP modes may be set for operator convenience or
21807 # communication requirements. No delays are specified; use "stty ixon -ixany"
21808 # to enable DC3/DC1 flow control!
21809 # I commented out the scrolling capabilities since they are too slow.
21810 hirez100|Selanar HiREZ-100,
21811 OTbs, OTpt, mir, msgr, xon,
21812 OTkn#4, cols#80, it#8, lines#48, vt#3,
21813 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
21814 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
21815 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21816 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
21817 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
21818 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
21819 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
21820 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
21821 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
21822 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
21823 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21824 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
21825 9l\E[r\E[m\E(B\017\E)0\E>,
21826 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
21827 smul=\E[4m, tbc=\E[3g,
21828 hirez100-w|Selanar HiREZ-100 in 132-column mode,
21829 cols#132, use=hirez100,
21834 # From University of Wisconsin
21835 vsc|Signetics Vsc Video driver by RMC,
21837 cols#80, it#8, lines#26,
21838 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
21839 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21840 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
21841 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
21845 # Alan Frisbie <frisbie@flying-disk.com> writes:
21847 # As you may recall, the Soroc logo consisted of their name,
21848 # with the letter "S" superimposed over an odd design. This
21849 # consisted of a circle with a slightly smaller 15 degree (approx.)
21850 # wedge with rounded corners inside it. The color was sort of
21851 # a metallic gold/yellow.
21853 # If I had been more of a beer drinker it might have been obvious
21854 # to me, but it took a clue from their service department to make
21855 # me exclaim, "Of course!" The circular object was the top of
21856 # a beer can (the old removable pop-top style) and "Soroc" was an
21857 # anagram for "Coors".
21859 # I can just imagine the founders of the company sitting around
21860 # one evening, tossing back a few and trying to decide what to
21861 # call their new company and what to use for a logo.
21864 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
21865 soroc120|iq120|soroc|soroc iq120,
21866 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
21867 kcuf1=^L, kcuu1=^K, use=adm3a,
21868 soroc140|iq140|soroc iq140,
21871 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21872 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
21873 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
21874 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
21875 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21876 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
21877 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
21879 #### Southwest Technical Products
21881 # These guys made an early personal micro called the M6800.
21882 # The ct82 was probably its console terminal.
21885 # (swtp: removed obsolete ":bc=^D:" -- esr)
21886 swtp|ct82|southwest technical products ct82,
21889 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
21890 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
21891 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
21892 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
21893 \017\035\027\022\011,
21894 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
21898 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
21900 # Synertek used to make ICs, various 6502-based single-board process
21901 # control and hobbyist computers, and assorted peripherals including a
21902 # series of small inexpensive terminals (I think they were one of the
21903 # first to have a "terminal-on-a-keyboard", where the terminal itself
21904 # was only slightly larger than the keyboard).
21906 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
21907 # was a 40x24 terminal that could connect to a standard TV through a
21908 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
21909 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
21910 # I have a KTM-2/80 still in working order. The KTM-2s had fully
21911 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
21912 # ROM and 2 ROMs as character generators. They were incredibly simple,
21913 # and I've never had any problems with mine (witness the fact that mine
21914 # was made in 1981 and is still working great... I've blown the video
21915 # output transistor a couple of times, but it's a 2N2222 :-)
21917 # The KTM-3 (which is what is listed in the terminfo file) was their
21918 # attempt at putting a KTM-2 in a box (and some models came with a
21919 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
21920 # control and escape sequences are very different. The KTM-3 was always
21921 # real broken, at least according to the folks I've talked to about it.
21923 # The padding in the entry is probably off--these terminals were very
21924 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
21925 # anyone with any sanity replaced the ROMs with something that provided
21926 # a reasonable subset of VT100 functionality, since the usual ROMs were
21927 # obviously very primitive... oh, you could get an upgraded ROM from
21928 # Synertek for some incredible amount of money, but what hacker with an
21929 # EPROM burner would do that? :)
21931 # Sorry I don't have any contact info; I believe they were located in
21932 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
21933 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
21934 # business these days.
21937 # Tested, seems to work fine with vi.
21938 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
21941 clear=^Z, cub1=^H, cuf1=^L,
21942 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21944 #### Tab Office Products
21946 # TAB Products Co. - Palo Alto, California
21947 # Electronic Office Products,
21948 # 1451 California Avenue 94304
21950 # I think they're out of business.
21953 # The tab 132 uses xon/xoff, so no padding needed.
21954 # <smkx>/<rmkx> have nothing to do with arrow keys.
21955 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
21956 # Seems to be no way to get rid of status line.
21957 # The manual for this puppy was dated June 1981. It claims to be VT52-
21958 # compatible but looks more vt100-like.
21959 tab132|tab|tab132-15|tab 132/15,
21961 OTdN@, cols#80, lines#24, lm#96,
21962 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
21963 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
21964 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
21966 tab132-w|tab132 in wide mode,
21968 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
21969 tab132-rv|tab132 in reverse-video mode,
21970 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
21971 tab132-w-rv|tab132 in reverse-video/wide mode,
21972 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
21977 # Research Incorporated
21978 # 6425 Flying Cloud Drive
21979 # Eden Prairie, MN 55344
21980 # Vox: (612)-941-3300
21982 # The Teleray terminals were all discontinued in 1992-93. RI still services
21983 # and repairs these beasts, but no longer manufactures them. The Teleray
21984 # people believe that all the types listed below are very rare now (1995).
21985 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
21986 # Model 100) that were ANSI-compatible.
21988 # Note two things called "teleray". Reorder should move the common one
21989 # to the front if you have either. A dumb teleray with the cursor stuck
21990 # on the bottom and no obvious model number is probably a 3700.
21993 t3700|dumb teleray 3700,
21996 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
21997 t3800|teleray 3800 series,
21999 cols#80, it#8, lines#24,
22000 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22001 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
22002 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
22003 t1061|teleray|teleray 1061,
22004 OTbs, am, km, xhp, xt,
22005 cols#80, it#8, lines#24, xmc#1,
22006 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22007 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22008 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
22009 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
22010 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
22011 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
22012 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
22013 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
22015 t1061f|teleray 1061 with fast PROMs,
22016 dl1=\EM, il1=\EL, ip@, use=t1061,
22017 # "Teleray Arpa Special", officially designated as
22018 # "Teleray Arpa network model 10" with "Special feature 720".
22019 # This is the new (1981) fast microcode updating the older "arpa" proms
22020 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
22021 # converts the keypad to programmable function keys, and has other goodies.
22022 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
22023 # programs handle such lossage properly.
22024 # Note: this is NOT the old termcap's "t1061f with fast proms."
22025 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
22026 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
22027 t10|teleray 10 special,
22029 cols#80, it#8, lines#24, xmc#2,
22030 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
22031 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22032 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
22033 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
22035 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
22036 # back/forth words. Put the function keys (f1-f10) where they can be
22037 # found, and turn off the other magic keys along the top row, except
22038 # for line/local. Do the magic appropriate to make the page shifts work.
22039 # Also toggle ^S/^Q for those of us who use Emacs.
22041 am, da, db, mir, xhp, xt,
22043 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
22044 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
22045 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
22046 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
22047 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
22048 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
22049 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
22050 smso=\E[7m, smul=\E[4m,
22052 #### Texas Instruments (ti)
22055 # The Silent 700 was so called because it was built around a quiet thermal
22056 # printer. It was portable, equipped with an acoustic coupler, and pretty
22057 # neat for its day.
22058 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
22061 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
22064 # Texas Instruments 916 VDT 7 bit control mode
22066 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
22068 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
22069 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
22070 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22071 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
22072 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
22073 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
22074 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
22075 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
22076 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
22077 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
22078 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
22079 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
22080 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
22081 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
22084 # Texas Instruments 916 VDT 8 bit control mode
22086 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
22087 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
22088 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
22089 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
22090 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
22091 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
22092 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
22094 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
22096 ti916-132|Texas Instruments 916 VDT vt220 132 column,
22097 cols#132, use=ti916,
22099 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
22101 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
22102 cols#132, use=ti916-8,
22103 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
22105 cols#80, it#8, lines#24,
22106 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22107 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22108 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22109 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22110 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22111 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22112 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
22113 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
22114 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
22115 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
22116 smul=\E[4m, tbc=\E[3g,
22117 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
22119 cols#80, it#8, lines#24,
22120 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22121 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22122 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22123 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22124 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22125 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22126 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
22127 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
22128 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
22129 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
22130 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22131 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
22132 cols#132, use=ti924,
22133 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
22134 cols#132, use=ti924-8,
22135 ti931|Texas Instruments 931 VDT,
22138 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
22139 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22140 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
22141 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
22142 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22143 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
22144 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
22145 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
22146 sgr0=\E4@, smso=\E4A, smul=\E4D,
22147 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
22148 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
22149 # (ti926-8: I corrected this from the broken SCO entry -- esr)
22150 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
22151 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
22152 ti_ansi|basic entry for ti928,
22153 am, bce, eo, xenl, xon,
22154 colors#8, cols#80, it#8, lines#25, pairs#64,
22155 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
22156 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
22157 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
22158 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
22159 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22160 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
22161 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
22162 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
22163 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
22164 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
22165 smso=\E[7m, smul=\E[4m,
22167 # 928 VDT 7 bit control mode
22169 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
22170 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
22171 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
22172 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
22173 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
22174 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
22176 # 928 VDT 8 bit control mode
22178 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
22179 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
22180 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
22181 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
22182 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
22183 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
22184 kpp=\233T, kprt=\23335~, use=ti_ansi,
22189 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
22190 # had just <smso>=\EG6 which I think means standout was supposed to be
22191 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
22192 # <invis> might work-- esr)
22193 zen30|z30|zentec 30,
22196 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22197 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
22198 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
22199 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
22200 smul@, use=adm+sgr,
22201 # (zen50: this had extension capabilities
22202 # :BS=^U:CL=^V:CR=^B:
22203 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
22204 # which were also in the original entry -- esr)
22205 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
22206 zen50|z50|zentec zephyr,
22208 cols#80, lines#24, xmc#1,
22209 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
22210 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
22211 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
22212 rmul@, smul@, use=adm+sgr,
22214 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
22215 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
22218 blink=\EM", clear=\EH\EJ, cnorm=\EP,
22219 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
22220 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
22221 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
22222 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
22223 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
22224 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
22225 smso=\EM$, smul=\EM0,
22227 ######## OBSOLETE UNIX CONSOLES
22230 #### Apollo consoles
22232 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
22233 # labeled HP700s now.
22236 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
22237 apollo|apollo console,
22240 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
22241 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
22242 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
22243 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
22244 smso=\ES, smul=\EU, vpa=\EO+\s,
22246 # We don't know whether or not the apollo guys replicated DEC's firmware bug
22247 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
22248 # both these capabilities.
22249 apollo_15P|apollo 15 inch display,
22250 rmir@, smir@, use=vt132,
22251 apollo_19L|apollo 19 inch display,
22252 rmir@, smir@, use=vt132,
22253 apollo_color|apollo color display,
22254 rmir@, smir@, use=vt132,
22258 # This actually describes the generic SVr4 display driver for Intel boxes.
22259 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
22260 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
22261 att6386|at386|386at|AT&T WGS 6386 console,
22263 cols#80, it#8, lines#25,
22264 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22265 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
22266 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
22267 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
22268 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22269 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
22270 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
22271 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
22272 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
22273 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
22274 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22275 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
22276 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
22277 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
22278 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
22279 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
22281 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
22282 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
22283 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
22284 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
22285 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
22286 pc6300plus|AT&T 6300 plus,
22289 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
22290 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
22291 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
22292 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
22293 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
22294 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
22295 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
22296 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
22297 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22298 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22300 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
22302 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
22303 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
22304 # is broken. All the special key sequences are broken, making it unusable
22305 # with Emacs. The problem stems from the following:
22307 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
22308 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
22309 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
22310 # uses resizable terminal windows, but the bundled terminal program always
22311 # uses an 80x24 window (and doesn't support seem to support a 132-column
22314 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
22315 # library which was a superset of SVr3.5 curses (called tam, for "terminal
22316 # access method".) tam includes support for real, overlapping windows,
22317 # onscreen function key labels, and bitmap graphics. But since the primary
22318 # user interface on the UNIX PC was a GUI program (ua, for "user
22319 # assistant",) and remote administration was considered important for the
22320 # machine, tam also supported VT100-compatible terminals attached to the
22321 # serial port or used across the StarLan network. To simulate the extra keys
22322 # not present on a VT100, users could press ESC and a two-letter sequence,
22323 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
22324 # however, were not the same as those sent by the actual Undo key. The
22325 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
22326 # (If you're interested in adding some of the tam calls to ncurses, btw, I
22327 # have the full documentation and several programs which use tam. It also
22328 # used an extended terminfo format to describe key sequences, special
22329 # highlighting modes, etc.)
22331 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
22332 # there are two sequences for every key-modifier combination (local keyboard
22333 # sequence and remote "VT100" sequence.) But I doubt many people are trying
22334 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
22335 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
22336 # seem to have been built from the manual describing the VT100 sequences.
22337 # This means it doesn't work for a real live UNIX PC.
22339 # FONTS: The UNIX PC also has a strange interpretation of "alternate
22340 # character set". Rather than the VT100 graphics you might expect, it allows
22341 # up to 8 custom fonts to be loaded at any given time. This means that
22342 # programs expecting VT100 graphics will usually be disappointed. For this
22343 # reason I have disabled the smacs/rmacs sequences, but they could easily be
22344 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
22345 # manpage), should you wish to do so:
22347 # SGR10 - Select font 0 - ESC [ 10 m or SO
22348 # SGR11 - Select font 1 - ESC [ 11 m or SI
22349 # SGR12 - Select font 2 - ESC [ 12 m
22351 # SGR17 - Select font 7 - ESC [ 17 m
22353 # Graphics for line drawing are not reliably found at *any* character
22354 # location because the UNIX PC has dynamically reloadable fonts. I use font
22355 # 0 for regular text and font 1 for italics, but this is by no means
22356 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
22358 # MISC: The cursor visible/cursor invisible sequences were swapped in the
22359 # distributed terminfo.
22361 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
22362 # the UNIX PC terminfo entry. The modified version works great with Lynx,
22363 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
22364 # attached by serial cable. In Emacs, even the Undo key works, and many
22365 # applications can now use the F1-F8 keys.
22368 # Terminfo entry for the AT&T Unix PC 7300
22369 # from escape(7) in Unix PC 7300 Manual.
22370 # Somewhat similar to a vt100-am (but different enough
22371 # to redo this from scratch.)
22373 # /***************************************************************
22375 # * FONT LOADING PROGRAM FOR THE UNIX PC
22377 # * This routine loads a font defined in the file ALTFONT
22378 # * into font memory slot #1. Once the font has been loaded,
22379 # * it can be used as an alternative character set.
22381 # * The call to ioctl with the argument WIOCLFONT is the key
22382 # * to this routine. For more information, see window(7) in
22383 # * the PC 7300 documentation.
22384 # ***************************************************************/
22385 # #include <string.h> /* needed for strcpy call */
22386 # #include <sys/window.h> /* needed for ioctl call */
22387 # #define FNSIZE 60 /* font name size */
22388 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
22390 # * The file /usr/lib/wfont/special.8.ft comes with the
22391 # * standard PC software. It defines a graphics character set
22392 # * similar to that of the Teletype 5425 terminal. To view
22393 # * this or other fonts in /usr/lib/wfont, use the command
22394 # * cfont <filename>. For further information on fonts see
22395 # * cfont(1) in the PC 7300 documentation.
22398 # struct altfdata /* structure for alt font data */
22400 # short altf_slot; /* memory slot number */
22401 # char altf_name[FNSIZE]; /* font name (file name) */
22405 # int wd; /* window in which altfont will be */
22406 # struct altfdata altf;
22407 # altf.altf_slot=1;
22408 # strcpy(altf.altf_name,ALTFONT);
22409 # for (wd =1; wd < 12; wd++) {
22410 # ioctl(wd, WIOCLFONT,&altf);
22414 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
22415 # they're confirmed by the man page for the System V display---esr)
22417 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
22419 cols#80, it#8, lines#24,
22420 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
22421 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
22422 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
22423 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22424 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
22425 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
22426 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
22427 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
22428 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
22429 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
22430 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
22431 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
22432 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
22433 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
22434 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
22435 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
22436 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
22437 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
22438 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
22439 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
22440 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
22441 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
22444 #### Convergent Technology
22446 # Burroughs bought Convergent shortly before it merged with Univac.
22447 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
22448 # from 1991 or earlier).
22451 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
22452 # (aws: removed unknown :dn=^K: -- esr)
22453 aws|Convergent Technologies AWS workstation under UTX and Xenix,
22455 OTug#0, cols#80, lines#28, xmc#0,
22456 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
22457 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
22458 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
22459 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
22460 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
22461 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
22463 awsc|Convergent Technologies AWS workstation under CTOS,
22465 OTug#0, cols#80, lines#24, xmc#0,
22466 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
22467 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
22468 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
22469 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
22475 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
22476 # The digital uVax II's had a graphic display called a qdss. It was
22477 # supposed to be a high performance graphic accelerator, but it was
22478 # late to market and barely appeared before faster dumb frame buffers
22479 # appeared. I have only used this display while running X11. However,
22480 # during bootup, it was in text mode, and probably had a terminal emulator
22481 # within it. And that is what your termcap entry is for. In graphics
22482 # mode the screen size is 1024x864 pixels.
22483 qdss|qdcons|qdss glass tty,
22485 cols#128, lines#57,
22486 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
22487 cup=\E=%p1%c%p2%c, cuu1=^K,
22489 #### Fortune Systems consoles
22491 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
22492 # in their day; I (esr) used one myself for a year or so around 1984.
22493 # They had no graphics, though, and couldn't compete against Suns and
22497 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
22498 # (This had extension capabilities
22499 # :rv=\EH:re=\EI:rg=0:GG=0:\
22500 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
22501 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
22502 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
22503 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
22504 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
22505 # to force both magic cookie glitches off. Once upon a time, I
22506 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
22507 # function keys; thus the "Al" value for HM was certainly an error. I renamed
22508 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
22509 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
22510 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
22511 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
22512 fos|fortune|Fortune system,
22515 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
22516 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
22517 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
22518 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
22519 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
22520 ich1=\034Q$<5>, il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H,
22521 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
22522 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
22523 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
22524 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH,
22525 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
22526 smso=^\H`, smul=^\HP,
22528 #### Masscomp consoles
22530 # Masscomp has gone out of business. Their product line was purchased by
22531 # comany in Georgia (US) called "XS International", parts and service may
22532 # still be available through them.
22535 # (masscomp: ":MT:" changed to ":km:"; -- esr)
22536 masscomp|masscomp workstation console,
22538 cols#80, it#8, lines#24,
22539 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22540 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22541 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
22542 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
22543 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
22544 masscomp1|masscomp large screen version 1,
22545 cols#104, lines#36, use=masscomp,
22546 masscomp2|masscomp large screen version 2,
22547 cols#64, lines#21, use=masscomp,
22552 # OSF/1 1.1 Snapshot 2
22553 pmcons|pmconsole|PMAX console,
22555 cols#128, lines#57,
22556 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
22557 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22558 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
22560 #### Other consoles
22561 # The following is a version of the ibm-pc entry distributed with PC/IX,
22562 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
22563 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
22564 # (the former is untrue, and the latter failed under UCB/man); standout and
22565 # underline modes have been added. Note: this entry describes the "native"
22566 # capabilities of the PC monochrome display, without ANY emulation; most
22567 # communications packages (but NOT PC/IX connect) do some kind of emulation.
22568 pcix|PC/IX console,
22571 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
22572 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22573 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
22576 # (ibmpcx: this entry used to be known as ibmx.
22577 # It formerly included the following extension capabilities:
22578 # :GC=b:GL=v:GR=t:RT=^J:\
22579 # :GH=\E[196g:GV=\E[179g:\
22580 # :GU=\E[193g:GD=\E[194g:\
22581 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
22582 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
22583 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
22584 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
22585 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
22586 # what was there before. -- esr)
22587 ibmpcx|xenix|ibmx|IBM PC xenix console display,
22590 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
22591 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22592 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
22593 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
22594 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
22595 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
22597 ######## OTHER OBSOLETE TYPES
22599 # These terminals are *long* dead -- these entries are retained for
22600 # historical interest only.
22603 #### Obsolete non-ANSI software emulations
22606 # CTRM terminal emulator
22607 # 1. underlining is not allowed with colors: first, is is simulated by
22608 # black on white, second, it disables background color manipulations.
22609 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
22610 # so we have to save their status in the static registers A, B and H
22611 # respectively, to be able to restore them when color changes
22612 # (because any color change turns off ALL attributes)
22613 # 3. <bold> and <rev> sequences alternate modes,
22614 # rather than simply entering them. Thus we have to check the
22615 # static register B and H to determine the status, before sending the
22617 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
22618 # and then reset colors
22619 # 5. implementation of the protect mode would badly penalize the performance.
22620 # we would have to use \E&bn sequence to turn off colors (as well as all
22621 # other attributes), and keep the status of protect mode in yet another
22622 # static variable. If someone really needs this mode, they would have to
22623 # create another terminfo entry.
22624 # 6. original color-pair is white on black.
22625 # store the information about colors into static registers
22626 # 7. set foreground color. it performs the following steps.
22627 # 1) turn off all attributes
22628 # 2) turn on the background and video attributes that have been turned
22629 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
22630 # 3) turn on foreground attributes
22631 # 4) store information about foreground into U,V,W static registers
22632 # 8. turn on background: similar to turn on foreground above
22633 ctrm|C terminal emulator,
22635 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
22636 pairs#63, pb#19200, vt#6,
22637 bel=^G, blink=\E&dA%{1}%PA,
22638 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
22639 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22640 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
22641 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
22642 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
22643 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
22644 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
22645 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
22646 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
22648 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
22649 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
22650 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
22651 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
22652 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
22653 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
22654 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
22655 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
22656 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
22657 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
22658 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
22660 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
22661 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
22663 # gs6300 - can't use blue foreground, it clashes with underline;
22664 # it's simulated with cyan
22665 # Bug: The <op> capability probably resets attributes.
22666 # (gs6300: commented out <rmln> (no <smln>) --esr)
22667 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
22668 am, bce, msgr, xon,
22669 colors#8, cols#80, it#8, lines#24, pairs#63,
22670 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
22672 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
22673 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22674 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22675 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22676 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22677 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
22678 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
22679 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
22680 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
22681 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
22682 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
22683 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
22684 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
22686 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
22687 # MS-Kermit with Heath-19 emulation mode enabled
22688 # (h19k: changed ":pt@:" to ":it@"
22689 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
22694 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
22695 # Software (formerly Peripherals Computers & Supplies, Inc) of
22696 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
22697 # also be reached at support@synergy.com.
22698 versaterm|versaterm vt100 emulator for the Macintosh,
22700 cols#80, it#8, lines#24,
22701 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22702 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
22703 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
22704 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
22705 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
22706 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
22707 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
22708 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
22709 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
22710 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
22711 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
22712 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
22715 # From: Rick Thomas <ihnp4!btlunix!rbt>
22716 # (xtalk: I added <rmam>/<smam> based on the init string.
22717 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
22718 am, mir, msgr, xon,
22719 cols#80, it#8, lines#24, vt#3, xmc#1,
22720 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22721 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
22722 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
22723 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
22724 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
22725 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
22726 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
22727 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
22728 rmkx=\E[?1l\E>, rmso=\E[m\s,
22729 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
22730 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
22731 tbc=\E[3g, use=vt100+fnkeys,
22733 # The official PC terminal emulator program of the AT&T Product Centers.
22734 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
22735 simterm|attpc running simterm,
22738 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22739 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
22740 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
22741 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
22743 #### Daisy wheel printers
22745 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
22746 # wheel terminals. These are now largely obsolete.
22749 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
22750 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
22753 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
22754 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
22755 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
22757 is2=\r \E9, use=diablo1620,
22758 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
22759 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
22760 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
22762 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
22764 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
22766 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
22767 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
22769 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
22770 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
22771 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
22772 # If no tab is set or the terminal's in a bad mood, it glitches the screen
22773 # around all of memory. Note that return puts a blank ("a return character")
22774 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
22775 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
22776 # curses won't work (some old BSD versions) because it doesn't clear this bit,
22777 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
22778 # I have been unable to get tabs set in all 96 lines - it always leaves at
22779 # least one line with no tabs in it, and once you tab through that line,
22780 # it completely weirds out.
22781 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
22784 cols#80, lines#24, lm#96,
22785 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
22786 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
22787 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
22788 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
22789 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
22793 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22794 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22795 gsi|mystery gsi terminal,
22798 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
22800 aj830|aj832|aj|anderson jacobson,
22802 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
22804 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
22805 aj510|Anderson-Jacobson model 510,
22808 clear=^L, cub1=^H, cuf1=\EX,
22809 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
22810 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
22811 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
22812 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
22813 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
22815 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
22816 # This is incomplete, but it's a start.
22817 nec5520|nec|spinwriter|nec 5520,
22820 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
22821 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
22823 qume5|qume|Qume Sprint 5,
22826 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22827 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22828 # I suspect the xerox 1720 is the same as the diablo 1620.
22829 xerox1720|x1720|x1750|xerox 1720,
22832 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
22835 #### Miscellaneous obsolete terminals, manufacturers unknown
22837 # If you have any information about these (like, a manufacturer's name,
22838 # and a date on the serial-number plate) please send it!
22840 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
22843 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
22844 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
22847 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
22848 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
22849 kf4=\E8, rmso=\Em^C, smso=\Em^L,
22850 cops10|cops|cops-10|cops 10,
22853 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22854 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
22855 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
22857 # (d132: removed duplicate :ic=\E5:,
22858 # merged in capabilities from a BRL entry -- esr)
22859 d132|datagraphix|datagraphix 132a,
22862 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
22863 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
22864 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
22865 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
22866 # The d800 was an early portable terminal from c.1984-85 that looked a lot
22867 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
22868 # mode (which is what this entry looks like) and several other lesser-known
22871 OTbs, am, da, db, msgr, xhp,
22872 cols#80, it#8, lines#24,
22873 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22874 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
22875 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
22876 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
22877 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
22878 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
22879 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22880 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
22881 digilog|digilog 333,
22884 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
22886 # The DWK was a terminal manufactured in the Soviet Union c.1986
22887 dwk|dwk-vt|dwk terminal,
22889 cols#80, it#8, lines#24,
22890 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
22892 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22893 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
22894 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
22895 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
22896 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
22897 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
22898 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
22899 sgr0=\EX, smacs=\EF, smso=\ET,
22900 env230|envision230|envision 230 graphics terminal,
22902 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
22903 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22905 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
22906 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
22907 # coupler attached, the whole rig fitting in a suitcase and more or less
22908 # portable. Hot stuff for c.1977 :-) -- esr
22909 ep48|ep4080|execuport 4080,
22912 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
22913 ep40|ep4000|execuport 4000,
22914 cols#136, use=ep4080,
22915 # Adam Thompson <athompso@pangea.ca> tells us:
22916 # Informer series - these are all portable units, resembling older
22917 # automatic bread-baking machines. The terminal looks like a `clamshell'
22918 # design, but isn't. The structure is similar to the Direct terminals,
22919 # but only half the width. The entire unit is only about 10" wide.
22920 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
22921 # keyboard. All the keys are crammed together, much like some laptop
22922 # PCs today, but perhaps less well organized...all these units have a
22923 # bewildering array of plugs on the back, including a built-in modem.
22924 # The 305 was a color version of the 304; the 306 and 307 were mono and
22925 # color terminals built for IBM bisync protocols.
22926 # From: Paul Leondis <unllab@amber.berkeley.edu>
22927 ifmr|Informer D304,
22930 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
22931 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
22932 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
22934 # Entry largely based on wy60 and has the features of wy60ak.
22935 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
22936 am, bw, hs, km, mir, msgr, ul, xon,
22937 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
22938 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
22939 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
22940 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
22941 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
22942 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
22943 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
22945 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
22946 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
22948 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
22949 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
22950 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
22951 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
22952 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
22953 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
22954 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
22955 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
22956 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
22957 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
22958 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
22959 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
22960 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
22961 rs3=\EwG\Ee($<150>,
22962 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
22963 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
22964 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
22965 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
22966 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
22968 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
22969 uc=\EG8\EG0, use=adm+sgr,
22970 teletec|Teletec Datascreen,
22973 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
22975 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
22976 # This description is for the LANPAR Technologies VISION 3220
22977 # terminal from 1984/85. The function key definitions k0-k5 represent the
22978 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
22979 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
22981 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
22982 # I had a couple of scopes (3221) like this once where I used to work, around
22983 # the 1987 time frame if memory serves me correctly. These scopes were made
22984 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
22985 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
22986 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
22987 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
22988 # (3221) cost about $1500 each, and one was always broken -- had to be sent
22989 # back to the shop for repairs.
22990 # The only real advantage these scopes had over the VT-240's were:
22991 # 1) They were faster in the Regis display, or at least the ones I did
22992 # 2) They had a handy debugging feature where you could split-screen the
22993 # scope, the graphics would appear on the top, and the REGIS commands would
22994 # appear on the bottom. I don't remember the VT-240s being able to do that.
22995 # I would swear that LANPAR Technologies was in MA someplace, but since I
22996 # don't work at the same place anymore, and those terminals and manuals were
22997 # long since junked, I cannot be any more sure than that.
22999 # (v3220: removed obsolete ":kn#10:",
23000 # I added <rmam>/<smam> based on the init string -- esr)
23001 v3220|LANPAR Vision II model 3220/3221/3222,
23002 OTbs, am, mir, xenl,
23003 cols#80, it#8, lines#24,
23004 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
23005 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23006 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
23007 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
23008 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
23009 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
23010 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
23011 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23012 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
23013 ######## ICH/ICH1 VERSUS RMIR/SMIR
23015 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
23016 # are present; the symptom is doubled characters in an update using insert.
23017 # These applications are technically correct; in both 4.3BSD termcap and
23018 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
23019 # unless the terminal needs both. To my knowledge, no terminal still in this
23020 # file requires both other than the very obsolete dm2500.
23022 # For ncurses-based applications this is not a problem, as ncurses uses
23023 # one or the other as appropriate but never mixes the two. Therefore we
23024 # have not corrected entries like `linux' and `xterm' that specify both.
23025 # If you see doubled characters from these, use the linux-nic and xterm-nic
23026 # entries that suppress ich/ich1. And upgrade to ncurses!
23029 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
23031 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
23032 # ECMA-48 standards are said to be almost identical, but are not the same
23033 # as X3.64 (though for practical purposes they are close supersets of it).
23035 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
23036 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
23037 # Coded Character Sets"), include your snail-mail address, and you should
23038 # receive the document in due course. Don't expect an email acknowledgment.
23040 # Related standards include "X3.4-1977: American National Standard Code for
23041 # Information Interchange" (the ASCII standard) and "X3.41.1974:
23042 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
23043 # American National Standard for Information Interchange." I believe (but
23044 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
23048 #### VT100/ANSI/ECMA-48
23050 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
23051 # and ECMA-48 Control Functions for Coded Character Sets.
23053 # Much of the content of this comment is adapted from a table prepared by
23054 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
23055 # discussion of some terminfo-related issues, and updates to capture ECMA-48
23056 # have been added. Control functions described in ECMA-48 only are tagged
23057 # with * after their names.
23059 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
23060 # sequences. In the main table, \E stands for an escape (\033) character,
23061 # SPC for space. Pn stands for a single numeric parameter to be inserted
23062 # in decimal ASCII. Ps stands for a list of such parameters separated by
23063 # semicolons. Parameter meanings for most parameterized sequences are
23064 # described in the notes.
23066 # Sequence Sequence Parameter or
23067 # Mnemonic Name Sequence Value Mode terminfo
23068 # -----------------------------------------------------------------------------
23069 # APC Applicatn Program Command \E _ - Delim -
23070 # BEL Bell * ^G - - bel
23071 # BPH Break Permitted Here * \E B - * -
23072 # BS BackSpace * ^H - EF -
23073 # CAN Cancel * ^X - - - (A)
23074 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
23075 # CCH Cancel Previous Character \E T - - -
23076 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
23077 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
23078 # CMD Coding Method Delimiter * \E
23079 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
23080 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
23081 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
23082 # CSI Control Sequence Intro \E [ - Intro -
23083 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
23084 # CUB Cursor Backward \E [ Pn D 1 eF cub
23085 # CUD Cursor Down \E [ Pn B 1 eF cud
23086 # CUF Cursor Forward \E [ Pn C 1 eF cuf
23087 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
23088 # CUU Cursor Up \E [ Pn A 1 eF cuu
23089 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
23090 # DA Device Attributes \E [ Pn c 0 - -
23091 # DAQ Define Area Qualification \E [ Ps o 0 - -
23092 # DCH Delete Character \E [ Pn P 1 eF dch
23093 # DCS Device Control String \E P - Delim -
23094 # DL Delete Line \E [ Pn M 1 eF dl
23095 # DLE Data Link Escape * ^P - - -
23096 # DMI Disable Manual Input \E \ - Fs -
23097 # DSR Device Status Report \E [ Ps n 0 - - (I)
23098 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
23099 # EA Erase in Area \E [ Ps O 0 eF - (J)
23100 # ECH Erase Character \E [ Pn X 1 eF ech
23101 # ED Erase in Display \E [ Ps J 0 eF ed (J)
23102 # EF Erase in Field \E [ Ps N 0 eF -
23103 # EL Erase in Line \E [ Ps K 0 eF el (J)
23104 # EM End of Medium * ^Y - - -
23105 # EMI Enable Manual Input \E b Fs -
23106 # ENQ Enquire ^E - - -
23107 # EOT End Of Transmission ^D - * -
23108 # EPA End of Protected Area \E W - - - (K)
23109 # ESA End of Selected Area \E G - - -
23110 # ESC Escape ^[ - - -
23111 # ETB End Transmission Block ^W - - -
23112 # ETX End of Text ^C - - -
23113 # FF Form Feed ^L - - -
23114 # FNK Function Key * \E [ Pn SPC W - - -
23115 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
23116 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
23117 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
23118 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
23119 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
23120 # HPB Char Position Backward \E [ j 1 FE -
23121 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
23122 # HT Horizontal Tab * ^I - FE - (N)
23123 # HTJ Horz Tab w/Justification \E I - FE -
23124 # HTS Horizontal Tab Set \E H - FE hts
23125 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
23126 # ICH Insert Character \E [ Pn @ 1 eF ich
23127 # IDCS ID Device Control String \E [ SPC O - * -
23128 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
23129 # IL Insert Line \E [ Pn L 1 eF il
23130 # IND Index \E D - FE -
23131 # INT Interrupt \E a - Fs -
23132 # JFY Justify \E [ Ps SPC F 0 FE -
23133 # IS1 Info Separator #1 * ^_ - * -
23134 # IS2 Info Separator #1 * ^^ - * -
23135 # IS3 Info Separator #1 * ^] - * -
23136 # IS4 Info Separator #1 * ^\ - * -
23137 # LF Line Feed ^J - - -
23138 # LS1R Locking Shift Right 1 * \E ~ - - -
23139 # LS2 Locking Shift 2 * \E n - - -
23140 # LS2R Locking Shift Right 2 * \E } - - -
23141 # LS3 Locking Shift 3 * \E o - - -
23142 # LS3R Locking Shift Right 3 * \E | - - -
23143 # MC Media Copy \E [ Ps i 0 - - (S)
23144 # MW Message Waiting \E U - - -
23145 # NAK Negative Acknowledge * ^U - * -
23146 # NBH No Break Here * \E C - - -
23147 # NEL Next Line \E E - FE nel (D)
23148 # NP Next Page \E [ Pn U 1 eF -
23149 # NUL Null * ^@ - - -
23150 # OSC Operating System Command \E ] - Delim -
23151 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
23152 # PFS Page Format Selection * \E Pn SPC J 0 - -
23153 # PLD Partial Line Down \E K - FE - (T)
23154 # PLU Partial Line Up \E L - FE - (U)
23155 # PM Privacy Message \E ^ - Delim -
23156 # PP Preceding Page \E [ Pn V 1 eF -
23157 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
23158 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
23159 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
23160 # PTX Parallel Texts * \E [ \ - - -
23161 # PU1 Private Use 1 \E Q - - -
23162 # PU2 Private Use 2 \E R - - -
23163 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
23164 # REP Repeat Char or Control \E [ Pn b 1 - rep
23165 # RI Reverse Index \E M - FE - (V)
23166 # RIS Reset to Initial State \E c - Fs -
23167 # RM Reset Mode * \E [ Ps l - - - (W)
23168 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
23169 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
23170 # SCI Single-Char Introducer \E Z - - -
23171 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
23172 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
23173 # SD Scroll Down \E [ Pn T 1 eF rin
23174 # SDS Start Directed String * \E [ Pn ] 1 - -
23175 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
23176 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
23177 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
23178 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
23179 # SI Shift In ^O - - - (P)
23180 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
23181 # SL Scroll Left \E [ Pn SPC @ 1 eF -
23182 # SLH Set Line Home * \E [ Pn SPC U - - -
23183 # SLL Set Line Limit * \E [ Pn SPC V - - -
23184 # SLS Set Line Spacing * \E [ Pn SPC h - - -
23185 # SM Select Mode \E [ Ps h none - - (W)
23186 # SO Shift Out ^N - - - (Q)
23187 # SOH Start Of Heading * ^A - - -
23188 # SOS Start of String * \E X - - -
23189 # SPA Start of Protected Area \E V - - - (Z)
23190 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
23191 # SPH Set Page Home * \E [ Ps SPC G - - -
23192 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
23193 # SPL Set Page Limit * \E [ Ps SPC j - - -
23194 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
23195 # SR Scroll Right \E [ Pn SPC A 1 eF -
23196 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
23197 # SRS Start Reversed String * \E [ Ps [ 0 - -
23198 # SSA Start of Selected Area \E F - - -
23199 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
23200 # SSW Set Space Width * \E [ Pn SPC [ none - -
23201 # SS2 Single Shift 2 (G2 set) \E N - Intro -
23202 # SS3 Single Shift 3 (G3 set) \E O - Intro -
23203 # ST String Terminator \E \ - Delim -
23204 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
23205 # STS Set Transmit State \E S - - -
23206 # STX Start pf Text * ^B - - -
23207 # SU Scroll Up \E [ Pn S 1 eF indn
23208 # SUB Substitute * ^Z - - -
23209 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
23210 # SYN Synchronous Idle * ^F - - -
23211 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
23212 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
23213 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
23214 # TBC Tab Clear \E [ Ps g 0 FE tbc
23215 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
23216 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
23217 # TSS Thin Space Specification \E [ Pn SC E none FE -
23218 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
23219 # VPB Line Position Backward * \E [ Pn k 1 FE -
23220 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
23221 # VT Vertical Tabulation * ^K - FE -
23222 # VTS Vertical Tabulation Set \E J - FE -
23224 # ---------------------------------------------------------------------------
23228 # Some control characters are listed in the ECMA-48 standard without
23229 # being assigned functions relevant to terminal control there (they
23230 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
23231 # here anyway for completeness.
23233 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
23235 # (B) There seems to be some confusion abroad between CHA and HPA. Most
23236 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
23237 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
23238 # preserved the CHA abbreviation.
23240 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
23241 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
23242 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
23243 # CHT abbreviation.
23245 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
23247 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
23250 # (F) CTC parameter values:
23251 # 0 = set char tab,
23252 # 1 = set line tab,
23253 # 2 = clear char tab,
23254 # 3 = clear line tab,
23255 # 4 = clear all char tabs on current line,
23256 # 5 = clear all char tabs,
23257 # 6 = clear all line tabs.
23259 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
23260 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
23261 # Position Absolute" but retains the HVP abbreviation.
23263 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
23266 # (I) DSR parameter values:
23269 # 2 = busy, will send DSR later,
23271 # 4 = malfunction, will send DSR later,
23273 # 6 = request CPR response.
23275 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
23276 # 0 = clear to end,
23277 # 1 = clear from beginning,
23280 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
23282 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
23284 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
23285 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
23286 # Position Relative" but retains the HPR abbreviation.
23288 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
23291 # (O) SGR parameter values:
23292 # 0 = default mode (attributes off),
23299 # 7 = reverse video,
23301 # 9 = crossed-out (marked for deletion),
23302 # 10 = primary font,
23303 # 10 + n (n in 1..9) = nth alternative font,
23305 # 21 = double underline,
23310 # 26 = proportional spacing,
23322 # 38 = set fg color as in CCITT T.416,
23323 # 39 = set default fg color,
23332 # 48 = set bg color as in CCITT T.416,
23333 # 49 = set default bg color,
23334 # 50 = turn off 26,
23338 # 54 = turn off 51 & 52,
23339 # 55 = not overlined,
23340 # 56-59 = reserved,
23341 # 61-65 = variable highlights for ideograms.
23343 # (P) SI is also called LSO, Locking Shift Zero.
23345 # (Q) SI is also called LS1, Locking Shift One.
23347 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
23348 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
23349 # Absolute' but retains the VPA abbreviation.
23351 # (S) MC parameters:
23352 # 0 = start xfer to primary aux device,
23353 # 1 = start xfer from primary aux device,
23354 # 2 = start xfer to secondary aux device,
23355 # 3 = start xfer from secondary aux device,
23356 # 4 = stop relay to primary aux device,
23357 # 5 = start relay to primary aux device,
23358 # 6 = stop relay to secondary aux device,
23359 # 7 = start relay to secondary aux device.
23361 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
23364 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
23367 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
23369 # (W) RM/SM modes are as follows:
23370 # 1 = Guarded Area Transfer Mode (GATM),
23371 # 2 = Keyboard Action Mode (KAM),
23372 # 3 = Control Representation Mode (CRM),
23373 # 4 = Insertion Replacement Mode (IRM),
23374 # 5 = Status Report Transfer Mode (SRTM),
23375 # 6 = Erasure Mode (ERM),
23376 # 7 = Line Editing Mode (LEM),
23377 # 8 = Bi-Directional Support Mode (BDSM),
23378 # 9 = Device Component Select Mode (DCSM),
23379 # 10 = Character Editing Mode (HEM),
23380 # 11 = Positioning Unit Mode (PUM),
23381 # 12 = Send/Receive Mode (SRM),
23382 # 13 = Format Effector Action Mode (FEAM),
23383 # 14 = Format Effector Transfer Mode (FETM),
23384 # 15 = Multiple Area Transfer Mode (MATM),
23385 # 16 = Transfer Termination Mode (TTM),
23386 # 17 = Selected Area Transfer Mode (SATM),
23387 # 18 = Tabulation Stop Mode (TSM),
23388 # 19 = Editing Boundary Mode (EBM),
23389 # 20 = Line Feed New Line Mode (LF/NL),
23390 # 21 = Graphic Rendition Combination Mode (GRCM),
23391 # 22 = Zero Default Mode (ZDM).
23393 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
23394 # but are listed here for reference.
23396 # (X) Select Alternate Presentation Variants is used only for non-Latin
23399 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
23401 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
23404 # ---------------------------------------------------------------------------
23408 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
23409 # X3.64 Control Sequence Introducer is the two characters "Escape ["
23411 # Delim a Delimiter
23413 # x/y identifies a character by position in the ASCII table (column/row)
23415 # eF editor function (see explanation)
23417 # FE format effector (see explanation)
23419 # F is a Final character in
23420 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
23421 # a control sequence (F from 4/0 to 7/14)
23423 # Gs is a graphic character appearing in strings (Gs ranges from
23424 # 2/0 to 7/14) in the ASCII table
23426 # Ce is a control represented as a single bit combination in the C1 set
23427 # of controls in an 8-bit character set
23429 # C0 the familiar set of 7-bit ASCII control characters
23431 # C1 roughly, the set of control chars available only in 8-bit systems.
23432 # This is too complicated to explain fully here, so read Jim Fleming's
23433 # article in the February 1983 BYTE, especially pages 214 through 224.
23435 # Fe is a Final character of a 2-character Escape sequence that has an
23436 # equivalent representation in an 8-bit environment as a Ce-type
23437 # (Fe ranges from 4/0 to 5/15)
23439 # Fs is a Final character of a 2-character Escape sequence that is
23440 # standardized internationally with identical representation in 7-bit
23441 # and 8-bit environments and is independent of the currently
23442 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
23444 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
23447 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
23450 # Pn is a numeric parameter in a control sequence, a string of zero or
23451 # more characters ranging from 3/0 to 3/9 in the ASCII table
23453 # Ps is a variable number of selective parameters in a control sequence
23454 # with each selective parameter separated from the other by the code
23455 # 3/11 (which usually represents a semicolon); Ps ranges from
23456 # 3/0 to 3/9 and includes 3/11
23458 # * Not relevant to terminal control, listed for completeness only.
23460 # Format Effectors versus Editor Functions
23462 # A format effector specifies how following output is to be displayed.
23463 # An editor function allows you to modify the display. Informally
23464 # format effectors may be destructive; format effectors should not be.
23466 # For instance, a format effector that moves the "active position" (the
23467 # cursor or equivalent) one space to the left would be useful when you want to
23468 # create an overstrike, a compound character made of two standard characters
23469 # overlaid. Control-H, the Backspace character, is actually supposed to be a
23470 # format effector, so you can do this. But many systems use it in a
23471 # nonstandard fashion, as an editor function, deleting the character to the
23472 # left of the cursor and moving the cursor left. When Control-H is assumed to
23473 # be an editor function, you cannot predict whether its use will create an
23474 # overstrike unless you also know whether the output device is in an "insert
23475 # mode" or an "overwrite mode". When Control-H is used as a format effector,
23476 # its effect can always be predicted. The familiar characters carriage
23477 # return, linefeed, formfeed, etc., are defined as format effectors.
23479 # NOTES ON THE DEC VT100 IMPLEMENTATION
23481 # Control sequences implemented in the VT100 are as follows:
23483 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
23484 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
23486 # plus several private DEC commands.
23488 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
23490 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
23491 # Erase from beginning of line to cursor Esc [ 1 K
23492 # Erase line containing cursor Esc [ 2 K
23493 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
23494 # Erase from beginning of screen to cursor Esc [ 1 J
23495 # Erase entire screen Esc [ 2 J
23497 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
23498 # Esc [ 2 J, but this is wrong; the default is 0.
23500 # The VT100 responds to receiving the DA (Device Attributes) control
23502 # Esc [ c (or Esc [ 0 c)
23504 # by transmitting the sequence
23508 # where Ps is a character that describes installed options.
23510 # The VT100's cursor location can be read with the DSR (Device Status
23515 # The VT100 reports by transmitting the CPR sequence
23519 # where Pl is the line number and Pc is the column number (in decimal).
23521 # The specification for the DEC VT100 is document EK-VT100-UG-003.
23525 # Here is a description of the color and attribute controls supported in the
23526 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
23527 # terminal emulators for Intel boxes obey these. They are a proper subset
23528 # of the ECMA-48 escapes.
23530 # 0 all attributes off
23531 # 1 foreground bright
23533 # 5 blink on/background bright (not reliable with brown)
23535 # 8 set blank (non-display)
23536 # 10 set primary font
23537 # 11 set first alternate font (on PCs, display ROM characters 1-31)
23538 # 12 set second alternate font (on PCs, display IBM high-half chars)
23540 # Color attribute sets
23541 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
23542 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
23543 # Bright black becomes gray. Bright brown becomes yellow,
23544 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
23546 # * If the 5 attribute is on and you set a background color (40-47) it is
23547 # supposed to enable bright background.
23549 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
23550 # when you try to set a "bright brown" (yellow) background with attribute
23551 # 5 (you get a blinking yellow foreground instead). A few displays
23552 # (including the System V console) support an attribute 6 that undoes this
23553 # braindamage (this is required by iBCS2).
23555 # * Some older versions of ANSI.SYS have a bug that causes thems to require
23556 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
23559 #### Intel Binary Compatibility Standard
23561 # For comparison, here are the capabilities implied by the Intel Binary
23562 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
23563 # These recommendations are optional. IBCS2 allows the leading escape to
23564 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
23565 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
23566 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
23567 # terminfo entry are followed with the corresponding capability in parens:
23569 # CSI <n>k disable (n=0) or enable (n=1) keyclick
23570 # CSI 2h lock keyboard
23571 # CSI 2i send screen as input
23572 # CSI 2l unlock keyboard
23573 # CSI 6m enable background color intensity
23574 # CSI <0-2>c reserved
23575 # CSI <0-59>m select graphic rendition
23576 # CSI <n>;<m>H (cup) cursor to line n and column m
23577 # CSI <n>;<m>f cursor to line n and column m
23578 # CSI <n>@ (ich) insert characters
23579 # CSI <n>A (cuu) cursor up n lines
23580 # CSI <n>B (cud) cursor down n lines
23581 # CSI <n>C (cuu) cursor right n characters
23582 # CSI <n>D (cud) cursor left n characters
23583 # CSI <n>E cursor down n lines and in first column
23584 # CSI <n>F cursor up n lines and in first column
23585 # CSI <n>G (hpa) position cursor at column n-1
23586 # CSI <n>J (ed) erase in display
23587 # CSI <n>K (el) erase in line
23588 # CSI <n>L (il) insert line(s)
23589 # CSI <n>P (dch) delete characters
23590 # CSI <n>S (indn) scroll up n lines
23591 # CSI <n>T (rin) scroll down n lines
23592 # CSI <n>X (ech) erase characters
23593 # CSI <n>Z (cbt) back up n tab stops
23594 # CSI <n>` cursor to column n on line
23595 # CSI <n>a (cuu) cursor right n characters
23596 # CSI <n>d (vpa) cursor to line n
23597 # CSI <n>e cursor down n lines and in first column
23598 # CSI <n>g (cbt) clear all tabs
23599 # CSI <n>z make virtual terminal n active
23600 # CSI ?7h (smam) turn automargin on
23601 # CSI ?7l (rmam) turn automargin off
23602 # CSI s save cursor position
23603 # CSI u restore cursor position to saved value
23604 # CSI =<c>A set overscan color
23605 # CSI =<c>F set normal foreground color
23606 # CSI =<c>G set normal background color
23607 # CSI =<c>H set reverse foreground color
23608 # CSI =<c>I set reverse foreground color
23609 # CSI =<c>J set graphic foreground color
23610 # CSI =<c>K set graphic foreground color
23611 # CSI =<n>g (dispc) display n from alternate graphics character set
23612 # CSI =<p>;<d>B set bell parameters
23613 # CSI =<s>;<e>C set cursor parameters
23614 # CSI =<x>D enable/disable intensity of background color
23615 # CSI =<x>E set/clear blink vs. bold background
23616 # CSI 7 (sc) (sc) save cursor position
23617 # CSI 8 (rc) (rc) restore cursor position to saved value
23618 # CSI H (hts) (hts) set tab stop
23619 # CSI Q<n><string> define function key string
23620 # (string must begin and end with delimiter char)
23621 # CSI c (clear) clear screen
23623 # The lack of any specification for attributes in SGR (among other things)
23624 # makes this a wretchedly weak standard. The table above is literally
23625 # everything iBSC2 has to say about terminal escape sequences; there is
23626 # no further discussion of their meaning or how to set the parameters
23627 # in these sequences at all.
23630 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
23632 # The historical termcap file entries were written primarily in 4.4BSD termcap.
23633 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
23634 # with the extension names chosen for compatibility with the termcap names
23635 # assigned in System V terminfo. There are some variant extension sets out
23636 # there. We try to describe them here.
23638 #### XENIX extensions:
23640 # The XENIX extensions include a set of function-key capabilities as follows:
23642 # code XENIX variable name terminfo name name clashes?
23643 # ---- ------------------- ------------- -----------------------
23645 # CR key_char_right
23646 # CW key_change_window create_window
23648 # HM key_home khome
23650 # LD key_delete_line kdl1
23651 # LF key_linefeed label_off
23652 # NU key_next_unlocked_cell
23653 # PD key_page_down knp
23655 # PN start_print mc5
23657 # PS stop_print mc4
23658 # PU key_page_up kpp pulse
23659 # RC key_recalc remove_clock
23660 # RF key_toggle_ref req_for_input
23661 # RT key_return kent
23662 # UP key_up_arrow kcuu1 parm_up_cursor
23664 # WR key_word_right
23666 # The XENIX extensions also include the following character-set and highlight
23669 # XENIX terminfo function
23670 # ----- -------- ------------------------------
23671 # GS smacs start alternate character set
23672 # GE rmacs end alternate character set
23673 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
23674 # bo blink begin blink (not used in /etc/termcap)
23675 # be end blink (not used in /etc/termcap)
23676 # bb blink glitch (not used in /etc/termcap)
23677 # it dim begin dim (not used in /etc/termcap)
23678 # ie end dim (not used in /etc/termcap)
23679 # ig dim glitch (not used in /etc/termcap)
23681 # Finally, XENIX also used the following forms-drawing capabilities:
23683 # single double type ASCII approximation
23684 # ------ ------ ------------- -------------------
23685 # GV Gv vertical line |
23686 # GH Gv horizontal line - _
23687 # G1 G5 top right corner _ |
23688 # G2 G6 top left corner |
23689 # G3 G7 bottom left corner |_
23690 # G4 G8 bottom right corner _|
23691 # GD Gd down-tick character T
23692 # GL Gl left-tick character -|
23693 # GR Gr right-tick character |-
23694 # GC Gc middle intersection -|-
23695 # GU Gu up-tick character _|_
23697 # These were invented to take advantage of the IBM PC ROM character set. One
23698 # can compose an acsc string from the single-width characters as follows
23699 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
23700 # When translating a termcap file, ncurses tic will do this automatically.
23701 # The double forms characters don't fit the SVr4 terminfo model.
23703 #### AT&T Extensions:
23705 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
23706 # nonstandard capabilities. Its signature is the KM capability, used to name
23707 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
23708 # set. Comments in the original, and a little cross-checking with other AT&T
23709 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
23710 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
23711 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
23712 # cursor invisible), and CV=:ve: (make cursor normal).
23716 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
23717 # have the System V capabilities up to SVr1 level. After that, it supports
23718 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
23719 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
23720 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
23721 # HP binary format incompatible with SVr4's.
23723 #### IBM Extensions
23725 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
23726 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
23727 # capabilities following prtr_non with the following special capabilities:
23728 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
23729 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
23730 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
23731 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
23732 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
23733 # renamed (to kcbt and kslt). The places in the box[12] capabilities
23734 # correspond to acsc chars, here is the mapping:
23736 # box1[0] = ACS_ULCORNER
23737 # box1[1] = ACS_HLINE
23738 # box1[2] = ACS_URCORNER
23739 # box1[3] = ACS_VLINE
23740 # box1[4] = ACS_LRCORNER
23741 # box1[5] = ACS_LLCORNER
23742 # box1[6] = ACS_TTEE
23743 # box1[7] = ACS_RTEE
23744 # box1[8] = ACS_BTEE
23745 # box1[9] = ACS_LTEE
23746 # box1[10] = ACS_PLUS
23748 # The box2 characters are the double-line versions of these forms graphics.
23749 # The AIX binary terminfo format is incompatible with SVr4's.
23751 #### Iris console extensions:
23753 # HS is half-intensity start; HE is half-intensity end
23754 # CT is color terminal type (for Curses & rogue)
23755 # CP is color change escape sequence
23756 # CZ are color names (for Curses & rogue)
23758 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
23760 #### TC Extensions:
23762 # There is a set of extended termcaps associated with something
23763 # called the "Terminal Control" or TC package created by MainStream Systems,
23764 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
23765 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
23766 # that flags color terminals.
23768 ######## NCURSES USER-DEFINABLE CAPABILITIES
23770 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
23771 # infocmp to manipulate user-definable capabilities. Those that are intended
23772 # for use in either terminfo or termcap use 2-character names. Extended
23773 # function keys do not use 2-character names, and are available only with
23776 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
23777 # tic/infocmp, and uses this database (with a few changes). There are a few
23778 # differences, noted in
23779 # https://invisible-island.net/ncurses/ncurses-netbsd.html
23781 # ncurses makes explicit checks for a few user-definable capabilities: AX,
23782 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
23784 #### SCREEN Extensions:
23786 # The screen program uses the termcap interface. It recognizes a few useful
23787 # nonstandard capabilities. Those are used in this file.
23789 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
23791 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
23792 # E0 (str) Switch charset 'G0' back to standard charset.
23793 # S0 (str) Switch charset 'G0' to the specified charset.
23794 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
23797 # AX is relatively straightforward; it is interpreted by ncurses to say that
23798 # SGR 39/49 reset the terminal's foreground and background colors to their
23801 # XT is harder, since screen's manpage does not give more details. For that,
23802 # we must read screen's source-code. For example, when XT is set, screen
23805 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
23806 # screen may also set the terminal's name, which is (for xterm) distinct
23807 # from the icon name.
23808 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
23809 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
23810 # this is an rxvt feature.
23811 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
23812 # These are from xterm, although xterm accepts mouse codes that may not be
23813 # recognized by screen, e.g., 1005, 1006.
23814 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
23815 # sequence. However, because screen uses only termcap, the values returned
23816 # by Af/Ab are not usable because they rely on expressions that termcap
23817 # does not support. Therefore, screen uses a hardcoded string to work
23818 # around the limitation. In a few cases, screen also uses tparm, which
23819 # is a terminfo function rather than termcap.
23820 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
23821 # g) screen also uses the feature to decide whether to pay attention to other
23822 # xterm-related features which are unrelated to the description in the
23825 # Since XT is useful only when the outer terminal matches screen's assumptions,
23826 # it is appropriate to use it in the derived terminal descriptions such as
23827 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
23829 # The other ISO-2022 features are rarely used, but provided here to make
23830 # screen's termcap features available.
23832 #### XTERM Extensions:
23834 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
23835 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
23836 # additional function-key strings. Some other developers copied the feature,
23837 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
23838 # these key definitions less ambiguous.
23840 # A few terminals provide similar functionality (sending distinct keys when
23841 # a modifier is used), including rxvt.
23843 # These are the extended keys defined in this file:
23845 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
23846 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
23847 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
23848 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
23850 # Here are the other xterm-related extensions which are used in this file:
23852 # Cr is a string capability which resets the cursor color
23853 # Cs is a string capability which sets the cursor color to a given value.
23854 # The single string parameter is the color name/number, according to the
23856 # Ms modifies the selection/clipboard. Its parameters are
23857 # p1 = the storage unit (clipboard, selection or cut buffer)
23858 # p2 = the base64-encoded clipboard content.
23859 # Se resets the cursor style to the terminal power-on default.
23860 # Ss is a string capability with one numeric parameter. It is used to set the
23861 # cursor style as described by the DECSCUSR function to a block or
23863 # TS is a string capability which acts like "tsl", but uses no parameter and
23864 # goes to the first column of the "status line".
23865 # XM is a string capability which overrides ncurses's built-in string which
23866 # enables/disables xterm mouse mode.
23867 # xm shows the format of the mouse responses. Parameters are (from zero):
23871 # p4 = state, e.g., pressed or released
23872 # p6 = y-ordinate starting region
23873 # p7 = x-ordinate starting region
23874 # p8 = y-ordinate ending region
23875 # p9 = x-ordinate ending region
23876 # Other extensions, used in xm:
23879 #### Miscellaneous extensions:
23881 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
23882 # This was implemented for the Hurd.
23883 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
23884 # experimental feature of tmux.
23885 # E3 clears the terminal's scrollback buffer. This was implemented in the
23886 # Linux 3.0 kernel as a security feature. It matches a feature which was
23887 # added in xterm patch #107.
23888 # U8 is a numeric capability which denotes a terminal emulator which does not
23889 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
23890 # value to enable it.
23892 ######## CHANGE HISTORY
23894 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
23895 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
23896 # maintained by Eric S. Raymond as part of the ncurses project.
23898 # This file contains all the capability information present in John Kunze's
23899 # last version of the termcap master file, except as noted in the change
23900 # comments at end of file. Some information about very ancient obsolete
23901 # capabilities has been moved to comments. Some all-numeric names of older
23902 # terminals have been retired.
23904 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
23905 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
23906 # used by BSD curses.
23908 # The 9.1.0 version of this file was translated from my lightly-edited copy of
23909 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
23910 # the purpose. Unless the ncurses tic implementation and the Lisp code were
23911 # making perfectly synchronized mistakes which I then failed to catch by
23912 # eyeball, the translation was correct and perfectly information-preserving.
23914 # Major version number bumps correspond to major version changes in ncurses.
23916 # Here is a log of the changes since then:
23918 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
23919 # * First terminfo master translated from 8.3.
23920 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
23921 # * Replaced Wyse entries with updated entries supplied by vendor.
23923 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
23924 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
23925 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
23926 # * Better XENIX keycap translation. Describe TC termcaps.
23927 # * Contact and history info supplied by Qume.
23928 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
23929 # * Raided the Shuford FTP site for recent termcaps/terminfos.
23930 # * Added information on X3.64 and VT100 standard escape sequences.
23931 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
23932 # * Added a correct X11R6 xterm entry.
23933 # * Fixed terminfo translations of padding.
23934 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
23935 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
23936 # * Added u6/u7/u8/u9 capabilities.
23937 # * Added PCVT entry.
23938 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
23939 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
23940 # to use reverse-video standout so Emacs will look right.
23941 # * Added el1 capability to ansi.
23942 # * Added smacs/rmacs to ansi.sys.
23944 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
23945 # * New mt70 entry.
23946 # * Added COPYRIGHTS AND OTHER DELUSIONS.
23947 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
23948 # smartvid & smarterm, ampex 175 & 219 & 232,
23949 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
23950 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
23951 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
23952 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
23953 # * Replaced the Perkin-Elmer entries with vendor's official ones.
23954 # * Restored the old minimal-ansi entry, luna needs it.
23955 # * Fixed some incorrect ip and proportional-padding translations.
23956 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
23957 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
23958 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
23959 # to force a particular height.
23960 # * Added beehive4 and reorganized other Harris entries.
23961 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
23962 # * Merged in DEC's official entries for its terminals. The only old
23963 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
23964 # * Replaced the translated BBN BitGraph entries with purpose-built
23965 # ones from AT&T's SVr3.
23966 # * Replaced the AT&T entries with AT&T's official terminfos.
23967 # * Added teleray 16, vc415, cops10.
23968 # * Merged in many individual capabilities from SCO terminfo files.
23969 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
23971 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
23972 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
23973 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
23974 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
23975 # simterm, citoh and variants.
23976 # * Replaced sol entry with sol1 and sol2.
23977 # * Replaced Qume QVT and Freedom-series entries with purpose-built
23978 # terminfo entries.
23979 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
23980 # and dg200 entries using caps from from SCO.
23981 # * Added the usual set of function-key mappings to ANSI entry.
23982 # * Corrected xterm's function-key capabilities.
23983 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
23984 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
23985 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
23986 # * Fix in xterm entry, get the arrow keys right.
23987 # * Change some \0 escapes to \200.
23988 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
23989 # * Added apple (Videx card), adm1a, oadm31.
23990 # * Fixed malformed ampex csr.
23991 # * Fixed act4, cyb110; they had old-style prefix padding left in.
23992 # * Changed mandatory to advisory padding in many entries.
23993 # * Replaced HP entries up to hpsub with purpose-built ones.
23994 # * Blank rmir/smir/rmdc/smdc capabilities removed.
23995 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
23996 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
23997 # * Replaced the Ann Arbor entries with SCO's, the init strings are
23998 # more efficient (but the entries otherwise identical).
23999 # * Added dg211 from Shuford archive.
24000 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
24001 # adm42-nl, pc52, gs6300, xerox820, uts30.
24002 # * Pull SCO's padding into vi200 entry.
24003 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
24004 # entries merged in from SCO's descriptions.
24005 # * Fixed old-style prefix padding on zen50, h1500.
24006 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
24007 # entry from SCO's description.
24008 # * Reorganized the special entries.
24009 # * Added lm#0 to cbunix and virtual entries.
24011 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
24012 # * Restored cdc456tst.
24013 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
24014 # * Added megatek, beacon, microkit.
24015 # * Freeze for ncurses-1.9 release.
24016 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
24017 # * Added historical data for TAB.
24018 # * Comment fixes from David MacKenzie.
24019 # * Added the new BSDI pc3 entry.
24020 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
24021 # * A change in the tic -C logic now ensures that all entries in
24022 # the termcap translation will fit in < 1024 bytes.
24023 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
24024 # from GNU termcap file. This merges in all their local information.
24025 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
24026 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
24027 # * Added warnings about entries with long translations (restoring
24028 # all the GNU termcaps pushes a few over the edge).
24029 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
24030 # * Yet another tic change, and a couple of entry tweaks, to reduce the
24031 # number of long (> 1024) termcap translations back to 0.
24033 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
24034 # * Added kf13-kf20 to Linux entry.
24035 # * Regularize Prime terminal names.
24036 # * Historical data on Synertek.
24037 # * Freeze for ncurses-1.9.1.
24038 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
24039 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
24040 # * Eliminate whitespace in short name fields, this tanks some scripts.
24041 # * Name field changes to shorten some long entries.
24042 # * Termcap translation now automatically generates empty rmir/smir
24043 # when ich1/ich is present (copes with an ancient vi bug).
24044 # * Added `screen' entries from FSF's screen-3.6.2.
24045 # * Added linux-nic and xterm-nic entries.
24046 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
24047 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
24048 # eliminating some special-case code in ncurses.
24050 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
24051 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
24052 # that captures everything unique from it.
24053 # * Added reorder script generator.
24054 # * Freeze for ncurses 1.9.2 release.
24055 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
24056 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
24057 # * Added Olaf Siebert's corrections for adm12.
24058 # * ansi-pc-color now includes the colors and pairs caps, so that
24059 # entries which use it will inherit them automatically.
24060 # * The linux entry can now recognize the center (keypad 5) key.
24061 # * Removed some junk that found its way into Linux acsc.
24063 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
24064 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
24065 # * xterm doesn't try to use application keypad mode any more.
24066 # * Freeze for ncurses-1.9.3 release.
24067 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
24068 # * Added corrected sun entry from vendor.
24069 # * Added csr capability to linux entry.
24070 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
24071 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
24072 # * Some commented-out caps in long entries come back in, my code
24073 # for computing string-table lengths had a bug in it.
24074 # * pcansi series modified to fit comm-program reality better.
24075 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
24076 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
24077 # * Correct some bad aliases in the pcansi series
24078 # * Added entry for QNX console.
24079 # * Clean up duplicate long names for use with 4.4 library.
24080 # * Change vt100 standout to be normal reverse vide, not bright reverse;
24081 # this makes the Emacs status line look better.
24082 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
24083 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
24084 # * Minor surgery, mostly on name strings, to shorten termcap version.
24086 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
24087 # * Added dec-vt100 for use with the EWAN emulator.
24088 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
24089 # * Freeze for 1.9.5 alpha release.
24090 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
24091 # * Changed xterm lines to 24, the X11R6 default.
24092 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
24093 # * Added 7 newly discovered, undocumented acsc characters to linux
24094 # entry (the pryz{|} characters).
24095 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
24096 # * Correct two typos in the xterm entries introduced in 9.9.1.
24097 # * I finally figured out how to translate ko capabilities. Done.
24098 # * Added tvi921 entries from Tim Theisen.
24099 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
24100 # * Removed mystery tec entry, it was neither interesting nor useful.
24101 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
24102 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
24103 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
24104 # by making them relative to use capabilities
24105 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
24106 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
24107 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
24109 # * Translate all home=\E[;H capabilities to home=\E[H, they're
24111 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
24112 # vt100 and ANSI-like terminals.
24113 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
24114 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
24115 # does this now, too.
24116 # * fviewpoint is gone, it duplicated screwpoint.
24117 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
24118 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
24119 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
24120 # The UW vi50 replaces the old one, which becomes vi50adm,
24121 # * No more embedded commas in name fields.
24123 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
24124 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
24125 # * Introduced klone+* entries for describing Intel-console behavior.
24126 # * Linux kbs is default-mapped to delete for some brain-dead reason.
24127 # * -nsl -> -ns. The -pp syntax is obsolete.
24128 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
24129 # * Make xterm entry do application-keypad mode again. I got complaints
24130 # that it was messing up someone's 3270 emulator.
24131 # * Added some longname fields in order to avoid warning messages from
24132 # older tic implementations.
24133 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
24134 # it! (This gives us pi, greater than, less than, and a few more.)
24135 # * Freeze for ncurses-1.9.6 release.
24136 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
24137 # * Add xon to a number of console entries, they're memory-mapped and
24138 # don't need padding.
24139 # * Correct the use dependencies in the ansi series.
24140 # * Hand-translate more XENIX capabilities.
24141 # * Added hpterm entry for HP's X terminal emulator.
24142 # * Added aixterm entries.
24143 # * Shortened four names so everything fits in 14 chars.
24145 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
24146 # * Added ibcs2 entry and info on iBCS2 standard.
24147 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
24148 # * We can handle the HP meml/memu capability now.
24149 # * Added smacs to klone entries, just as documentation.
24150 # * Corrected ansi.sys and cit-500 entries.
24151 # * Added z39, vt320-k311, v220c, and avatar entries.
24152 # * Make pcansi use the ansi.sys invis capability.
24153 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
24154 # tvi925, tvi950, dt80, ncr7900i, h19.
24155 # * X3.64 has been withdrawn, change some references.
24156 # * Removed function keys from ansi-m entry.
24157 # * Corrected ansi.sys entry.
24158 # * Freeze for ncurses-1.9.7 release.
24159 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
24160 # * Added rmam/smam capabilities to many entries based on init strings.
24161 # * Added correct hpa/vpa to linux.
24162 # * Reduced several entries relative to vt52.
24163 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
24164 # * Exiled some utterly unidentifiable custom and homebrew types to the
24165 # UFO file; also, obsolete small-screen hardware; also, entries which
24166 # look flat-out incorrect, garbled, or redundant. These include the
24167 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
24168 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
24169 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
24170 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
24171 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
24172 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
24173 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
24174 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
24175 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
24176 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
24177 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
24178 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
24179 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
24180 # * Corrected pcvt25h as suggested by Brian C. Grayson
24181 # <bgrayson@pine.ece.utexas.edu>.
24182 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
24183 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
24184 # * Added kent=\EOM to xterm entry.
24186 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
24187 # * Corrected gigi entry.
24188 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
24189 # bad hpa/vpa capabilities.
24190 # * Corrected flash strings to have a uniform delay of .2 sec. No
24191 # more speed-dependent NUL-padding!
24192 # * terminfo capabilities in comments bracketed with <>.
24193 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
24194 # * Replaced pcvt with the 3.31 pcvt entries.
24195 # * Freeze for 1.9.7a.
24196 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
24197 # * Added emu entry from the X11R6 contrib tape sources.
24199 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
24200 # * Improved iris-ansi and sun entries.
24201 # * More flash string improvements.
24202 # * Corrected wy160 & wy160 as suggested by Robert Dunn
24203 # * Added dim to at386.
24204 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
24205 # he's ready to start using the termcap generated from this one.
24206 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
24207 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
24208 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
24209 # att610, att620, att630,
24210 # * Changed hazeltine name prefix from h to hz.
24211 # * Sent t500 to the UFI file.
24212 # * I think we've sucked all the juice out of BSDI's termcap file now.
24213 # * Freeze for ncurses 1.9.8 release
24214 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
24215 # * Unfreeze, linux kbs needed to be fixed.
24216 # * Tim Theisen pinned down a bug in the DMD firmware.
24217 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
24218 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
24219 # (The broken ones had been shadowed by sgr.)
24220 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
24221 # * Added documentation on ECMA-48 standard.
24222 # * New Amiga entry.
24223 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
24224 # * More ECMA-48 stuff
24225 # * Corrected typo in minix entry, added pc-minix.
24226 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
24227 # * Added rxvt entry.
24228 # * Added 1.3.x color-change capabilities to linux entry.
24229 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
24230 # * Corrected rxvt entry khome/kend.
24231 # * Corrected linux color change capabilities.
24232 # * NeXT entries from Dave Wetzel.
24233 # * Cleaned up if and rf file names (all in /usr/share now).
24234 # * Changed linux op capability to avoid screwing up a background color
24235 # pair set by setterm.
24236 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
24237 # * Added xterm-sun.
24238 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
24241 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
24242 # * Another sweep through the Shuford archive looking for new info.
24243 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
24244 # * Added st52 from Per Persson.
24245 # * Added eterm from the GNU Emacs 19.30 distribution.
24246 # * Freeze for 1.9.9.
24247 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
24248 # * FreeBSD console entries from Andrew Chernov.
24249 # * Removed duplicate Atari st52 name.
24250 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
24251 # * xterm doesn't actually have ACS_BLOCK.
24252 # * Change klone+color setf/setb to simpler forms that can be
24253 # translated into termcap.
24255 # * Removed mechanically-generated junk capabilities from cons* entries.
24256 # * Added color support to bsdos.
24257 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
24258 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
24259 # * Created ecma+color, linux can use it. Also added ech to linux.
24260 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
24261 # * Add descriptions to FreeBSD console entries. Also shorten
24262 # some aliases to <= 14 chars for portability.
24263 # * Added x68k console
24264 # * Added OTbs to several VT-series entries.
24265 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
24266 # * screen entry update for 3.7.1 from Michael Alan Dorman.
24267 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
24268 # * kterm correction due to Kenji Rikitake.
24269 # * ACS correction in vt320-kll due to Phillippe De Muyter.
24270 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
24271 # * Sun console entry correction from J.T. Conklin.
24272 # * Changed all DEC VT300 and up terminals to use VT300 tab set
24273 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
24274 # * Added smul to linux entry (we never noticed it was missing
24275 # because of sgr!).
24276 # * Added rmln to hp+labels (deduced from other HP entries).
24277 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
24278 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
24279 # * Corrected vt220 acsc.
24280 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
24281 # this corresponds to reality and helps prevent some tic warnings.
24282 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
24283 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
24284 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
24285 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
24286 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
24287 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
24288 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
24289 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
24290 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
24291 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
24292 # ifmr, v3220, wy100q, tandem653, ibmaed.
24293 # * Added DWK terminal description.
24294 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
24295 # * Many entries now have highlights inherited from adm+sgr.
24296 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
24297 # * xtitle and xtitle-twm enable access to the X status line.
24298 # * Added linux-1.3.6 color palette caps in conventional format.
24299 # * Added adm1178 terminal.
24300 # * Move fos and apollo terminals to obsolete category.
24301 # * Aha! The BRL terminals file told us what the Iris extensions mean.
24302 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
24303 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
24305 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
24306 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
24307 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
24308 # * Corrected, from BRL termcap file: vi50.
24309 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
24310 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
24311 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
24312 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
24313 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
24314 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
24315 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
24316 # * Paired-attribute fixes to various terminals.
24317 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
24318 # * xterm entry corrections from Thomas Dickey.
24319 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
24320 # * Added t916 entry, translated from a termcap in SCO's support area.
24321 # * New qnx entry from Michael Hunter.
24322 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
24323 # * Added hpex2 from Ville Sulko.
24324 # * Fixed a bug that ran the qnx and pcvtXX together.
24325 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
24326 # * Added dtterm entry from Solaris CDE.
24327 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
24328 # * corrected pairs#8 typo in dtterm entry.
24330 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
24331 # * updated xterm entry to cover 3.1.2E's new features.
24332 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
24333 # * Added new minix entry
24334 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
24335 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
24336 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
24337 # * Added Prism entries and kt7ix.
24338 # * Caution notes about EWAN and tabset files.
24339 # * Changed /usr/lib/tabset -> /usr/share/tabset.
24340 # * Added acsc/rmacs/smacs to vt52.
24341 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
24342 # * Merged in Thomas Dickey's reorganization of the xterm entries;
24343 # added technical corrections to avoid warning messages.
24344 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
24345 # * Added rmso=\E[27m in Linux entry.
24346 # * Added koi8-r support for Linux console.
24347 # * Replace xterm entries with canonical ones from XFree86 3.2.
24348 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
24349 # * Added color_xterm from Jacob Mandelson
24350 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
24351 # * Back off the xterm entry to use r6 as a base.
24352 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
24353 # * Added dec-vt220 at Adrian Garside's request.
24355 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
24357 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
24358 # * Minor corrections to xterm entries.
24359 # * Replaced EWAN telnet entry.
24360 # * Dropped the reorder script generator. It was a fossil.
24361 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
24362 # * Replaced minitel-2 entry.
24363 # * Added MGR, ansi-nt.
24364 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
24365 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
24366 # the 4.4BSD Lite2 file.
24368 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
24369 # * Use setaf/setab consistently with SVr4.
24370 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
24371 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
24372 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
24373 # * add xterm-16color, for XFree86 3.3
24374 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
24375 # * correct typo in emu
24376 # * correct typo in vt102-w (Robert Wuest)
24377 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
24378 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
24379 # * remove ech capability from rxvt (it does the wrong thing)
24380 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
24381 # * remove spurious newlines from several entries (hp+color, wy50,
24382 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
24384 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
24385 # * correct rmso capability of wy50-mc
24386 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
24387 # * add cbt to xterm-xf86-v32
24388 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
24389 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
24390 # other capabilities not in xterm-r6.
24391 # * remove alternate character set from kterm entry.
24392 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
24393 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
24394 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
24395 # * add xterm-8bit entry.
24396 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
24397 # * repair several places where early version of tic replaced \, with \\\,
24398 # * make acsc entries canonical form (sorted, uniq).
24399 # * modify acsc entries for linux, linux-koi8
24400 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
24401 # * add color, mouse support to kterm.
24402 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
24403 # * correct wy120 smxon/tbc capabilities which were stuck together.
24404 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
24405 # * add entry for xterm-xf86-v39t
24406 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
24407 # * add u8,u9 to sun-il description
24408 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
24409 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
24411 # * add hds200 description (Walter Skorski)
24412 # * add EMX 0.9b descriptions
24413 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
24414 # * rename xhpterm back to hpterm.
24415 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
24416 # * change initc in linux-c-nc to use 0..1000 range.
24417 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
24418 # * remove hpa/vpa from rxvt, which implements them incorrectly.
24419 # * add sgr0 for rxvt.
24420 # * remove bogus smacs/rmacs from EMX descriptions.
24421 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
24422 # * revised entry for att7300
24423 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
24424 # * use \0 rather than \200.
24425 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
24426 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
24427 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
24428 # * rename xterm-xf86-v39t to xterm-xf86-v40
24429 # * remove bold/underline from sun console entries since they're not
24431 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
24432 # * add beterm entry (Fred Fish)
24433 # * add irix-color/xwsh entry.
24434 # * turn ncv off for linux.
24435 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
24436 # * set ncv for FreeBSD console (treat colors with reverse specially).
24437 # * remove sgr string from qnx based on report by Xiaodan Tang
24438 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
24439 # * remove spurious commas from descriptions
24440 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
24441 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
24442 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
24443 # apparently based on cp-866).
24445 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
24447 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
24448 # * Replaced minitel-2 entry.
24449 # * Added MGR, ansi-nt.
24450 # * Minor corrections to xterm entries.
24451 # * Replaced EWAN telnet entry.
24452 # * Dropped the reorder script generator. It was a fossil.
24453 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
24454 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
24455 # the 4.4BSD Lite2 file.
24456 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
24457 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
24458 # * Updated iris-ansi; corrected vt102-w.
24459 # * Switch base xterm entry to 3.3 level.
24460 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
24462 # * Removed rmir/smir from tv92B.
24464 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
24465 # * add hds200 description (Walter Skorski)
24466 # * add beterm entry (Fred Fish)
24467 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
24468 # iris-color entries.
24469 # * add emx entries.
24470 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
24471 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
24473 # * remove sgr string from qnx based on report by Xiaodan Tang
24474 # * Added u8/u9, removed rmul/smul from sun-il.
24475 # * 4.2 tic displays \0 rather than \200.
24476 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
24477 # apparently based on cp-866).
24478 # * Merged in Pavel Roskin's acsc for linux-koi8
24479 # * Corrected some erroneous \\'s to \.
24480 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
24481 # * II -> ii in pcvtXX, screen, xterm.
24482 # * Removed \n chars following ANSI escapes in sgr & friends.
24483 # * Updated Wyse entries.
24484 # * h19 corrections from Tim Pierce.
24485 # * Noted that the dm2500 has both ich and smir.
24486 # * added pccons for the Alpha under OSF/1.
24487 # * Added Sony NEWS workstation entries and cit101e-rv.
24488 # * Reverted `amiga'; to Kent Polk's version, as I'm told
24489 # the Verkuil entry messes up with Amiga Telnet.
24490 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
24491 # * Corrected attributions in 10.2.0 release notes.
24492 # * Scanned the Shuford archive for new terminfos and information.
24493 # * Removed sgr from qnx entry (Thomas Dickey).
24494 # * Added entries for ICL and Kokusai Data Systems terminals.
24495 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
24496 # * Incorporated att700 from the Boundless Technology FTP site.
24497 # * Miscellaneous contact-address and Web-page updates.
24499 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
24502 # * add nxterm and xterm-color terminfo description (request by Cristian
24503 # Gafton <gafton@redhat.com>).
24504 # * modify rxvt terminfo description to clear alternate screen before
24505 # switching back to normal screen, for compatibility with applications
24506 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
24507 # * modify linux terminfo description to reset color palette (reported
24508 # by Telford Tendys <telford@eng.uts.edu.au>).
24511 # * merge changes from current XFree86 xterm terminfo descriptions.
24514 # * Added minitel1 entries from Alexander Montaron.
24515 # * Added qnxt2 from Federico Bianchi.
24516 # * Added arm100 terminfo entries from Dave Millen.
24519 # * Added ncsa telnet entries from Francesco Potorti
24522 # * modify ncsa telnet entry to reflect color, other capabilities based on
24523 # examination of the source code - T.Dickey.
24526 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
24529 # * Added Francesco Potorti's tuned Wyse 99 entries.
24530 # * dtterm enacs correction from Alexander V. Lukyanov.
24531 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
24532 # * correct a typo in icl6404 entry.
24533 # * add xtermm and xtermc
24536 # * format most %'char' sequences to %{number}
24537 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
24538 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
24541 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
24542 # * correct initialization string in xterm-r5, add misc other features
24543 # to correspond with xterm patch #84 - TD
24546 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
24547 # * add Mathew Vernon's mach console entries
24548 # * corrections for ncsa function-keys (report by Larry Virden)
24551 # * change linux to use ncv#2, since underline does not work with color - TD
24554 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
24555 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
24556 # application modes, change kent to use the correct keypad code - TD
24559 # * add entry for Tera Term - TD
24562 # * minor improvements for teraterm entry - TD
24563 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
24564 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
24567 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
24568 # xterm and ncsa entries by removing the unneeded ones. Note that
24569 # some entries will return kend & khome versus kslt and kfnd, for
24570 # PC-style keyboards versus strict vt220 compatibility - TD
24573 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
24575 # * add 'crt' entry - TD
24576 # * correct typos in 'linux-c' entry - TD
24579 # * update entries for BSD/OS console to use klone+sgr and klone+color
24580 # (Jeffrey C Honig)
24583 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
24586 # * add linux-lat, from RedHat patches to ncurses 4.2
24589 # * add complete set of default function-key definitions for scoansi - TD.
24592 # * add cnorm, cvvis for Linux 2.2 kernels
24595 # * add kmous to xterm-r5 -TD
24596 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
24597 # parent "use" clause -TD
24600 # * corrected cnorm, added el1 in 'screen' description -TD
24603 # * add ms-vt100 -TD
24606 # * corrections to beterm entry -TD
24609 # * add cygwin entry -TD
24612 # * minor corrections for beterm entry -TD
24615 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
24618 # * add amiga-8bit entry
24619 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
24620 # rcons-color, based on
24621 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
24622 # * add alias for iris-ansi-net
24625 # * corrected scoansi entry's acsc, some function keys, add color -TD
24628 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
24629 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
24630 # key mapping, leaving Potorti's entries more like he named them -TD
24631 # * remove enter/exit am-mode from cygwin -TD
24634 # * correct typos in several entries (missing '[' from CSI):
24635 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
24636 # strings for avt-ns -TD
24637 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
24640 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
24641 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
24642 # * add xterm-88color and xterm-256color -TD
24645 # * add "obsolete" termcap strings -TD
24646 # * add kvt and gnome entries -TD
24649 # * correct cup string for regent100 -TD
24652 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
24653 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
24654 # * change OTrs capabilities to rs2 -TD
24655 # * add obsolete and extended capabilities to 'screen' -TD
24658 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
24660 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
24661 # and adding kcbt -TD
24664 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
24665 # nonstandard resource settings -TD
24668 # * minor fixes for xterm-*, based on Debian #58530 -TD
24671 # * add several terminal types from esr's "11.0", as well as comments.
24672 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
24673 # vt220-8bit, vt220-old, wy85-8bit
24676 # * add several terminal types from esr's "11.0.1" (ansi-*).
24677 # * update OTxx capabilities for changes on 2000/3/4.
24678 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
24681 # * move screen's AX extension to ecma+color, modify several entries to
24682 # use that, adjusting ncv as needed -TD
24685 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
24686 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
24687 # in esr's version.
24690 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
24691 # * correct color definition for ibm3164, make minor changes to other
24692 # IBM terminal definitions based on recent terminfo descriptions -TD
24695 # * add mgterm, from NetBSD -TD
24696 # * add alias sun-cgsix for sun-ss5 as per NetBSD
24697 # * change cons25w to use rs2 for reset rather than rs1 -TD
24698 # * add rc/sc to aixterm based on manpage -TD
24701 # * remove ncv from xterm-16color, xterm-256color
24704 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
24707 # * add Eterm (Michael Jennings)
24710 # * add amiga-vnc entry.
24713 # * correct description of Top Gun Telnet.
24714 # * add kterm-color
24717 # * add qansi* entries from QNX ftp site.
24720 # * add Matrix Orbital entries by Eric Z. Ayers).
24721 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
24725 # * add S0, E0 extensions to screen's entry -TD
24728 # * several corrections based on tic's new parameter-checking code -TD
24729 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
24730 # bracketing sequences that reset video attributes (\E8 would restore
24734 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
24737 # * improved scoansi, based on SCO man-page, and testing console,
24738 # scoterm with tack -TD
24741 # * modify kterm to use acsc via SCS controls.
24744 # * screen 3.9.8 allows xterm mouse controls to pass-through
24747 # * remove spurious "%|" from some xterm entries.
24750 # * modify 'screen' khome/kend to match screen 3.09.08
24751 # * add examples of 'screen' customization (screen.xterm-xfree86,
24752 # screen.xterm-r6, screen.teraterm) -TD
24755 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
24756 # * add "Apple_Terminal" entries -Benjamin Sittler
24757 # * remove time-delays from "Apple_Terminal" entries -TD
24758 # * make sgr entries time-delays consistent with individual caps -TD
24761 # * corrected/updated screen.xterm-xfree86
24764 # * ELKS descriptions, from Federico Bianchi
24765 # * add u6 (CSR) to Eterm (Michael Jennings).
24768 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
24769 # tic which handles names no longer than 14 characters. Add
24770 # corresponding descriptions for the Darwin PowerPC console named
24771 # "xnuppc" -Benjamin Sittler
24774 # * change kbs in mach entries to ^? (Marcus Brinkmann).
24777 # * add "putty" entry -TD
24778 # * updated "Apple_Terminal" entries -Benjamin Sittler
24781 # * add ms-vt100-color entry -TD
24782 # * add "konsole" entries -TD
24785 # * update gnome entry to Redhat 7.2 -TD
24788 # * add kf13-kf48 strings to cons25w -TD
24789 # * add pcvt25-color entry -TD
24790 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
24791 # * improve some features of scoansi entry based on SCO's version -TD
24792 # * add scoansi-new entry corresponding to OpenServer 5.0.6
24795 # * add kcbt to screen entry -TD
24798 # * add rxvt-16color, ibm+16color, mvterm entries -TD
24801 # * split out linux-basic entry, making linux-c inherit from that, and
24802 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
24803 # the history of this console type -TD
24804 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
24805 # r/g/b parameters of initc are in the range 0 to 1000 -TD
24808 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
24811 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
24812 # in the latter -TD
24815 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
24816 # * ncr260wy350pp has only 16 color pairs -TD
24817 # * add sun-type4 from NetBSD -TD
24818 # * update xterm-xfree86 to current (xterm patch #170) -TD
24819 # * add screen-bce, screen-s entries -TD
24820 # * add xterm-1002, xterm-1003 entries -TD
24823 # * update homepage for Top Gun Telnet/SSH
24826 # * reduce duplication in emx entries, added emx-base -TD
24829 # * corrected acs for screen.teraterm -TD
24830 # * add tkterm entry -TD
24833 # * cygwin changes from Charles Wilson:
24834 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
24835 # primary instead of nxterm, to match XFree86's xterm.terminfo
24836 # usage and to prevent circular links.
24837 # (rxvt): add additional codes from rxvt.org.
24838 # (rxvt-color): new alias
24839 # (rxvt-xpm): new alias
24840 # (rxvt-cygwin): like rxvt, but with special acsc codes.
24841 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
24842 # with a "native" MSWin GUI. Each takes different acsc codes,
24843 # which are both different from the "normal" rxvt's acsc.
24844 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
24845 # (cygwinDBG): ditto.
24848 # * update gnome terminal entries -TD
24851 # * add entries for djgpp 2.03 and 2.04 -TD
24854 # * add alias for vtnt -TD
24855 # * update xterm-xfree86 for XFree86 4.4 -TD
24858 # * add linux-vt (Andrey V Lukyanov)
24861 # * add screen.linux -TD
24864 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
24867 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
24868 # * add vt100+ and vt-utf8 entries -TD
24869 # * add uwin entry -TD
24872 # * add sgr strings to several common entries lacking them, e.g.,
24873 # screen, to make the entries more portable -TD
24874 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
24875 # * similar fixups for cvvis/cnorm various entries -TD
24878 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
24882 # * add xterm-xf86-v44 -TD
24883 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
24884 # on G1 being used via an ISO-2022 escape sequence (report by
24885 # Juliusz Chroboczek) -TD
24886 # * add 'hurd' entry -TD
24889 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
24891 # * align with xterm #192's use of xterm-new -TD
24892 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
24893 # * make xterm-new the default "xterm" -TD
24896 # * minor fixes for emu -TD
24898 # * add rmam/smam to linux (Trevor Van Bremen)
24899 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
24900 # * fixes for avatar0 -TD
24901 # * fixes for vp3a+ -TD
24904 # * add xterm-pc-fkeys -TD
24905 # * review/update gnome and gnome-rh90 entries (prompted by
24906 # Redhat Bugzilla #122815) -TD
24907 # * review/update konsole entries -TD
24908 # * add sgr, correct sgr0 for kterm and mlterm -TD
24909 # * correct tsl string in kterm -TD
24912 # * make ncsa-m rmacs/smacs consistent with sgr -TD
24913 # * add sgr, rc/sc and ech to syscons entries -TD
24914 # * add function-keys to decansi -TD
24915 # * add sgr to mterm-ansi -TD
24916 # * add sgr, civis, cnorm to emu -TD
24917 # * correct/simplify cup in addrinfo -TD
24918 # * corrections for gnome and konsole entries
24919 # (Redhat Bugzilla #122815) -Hans de Goede
24920 # * modify DEC entries (vt220, etc), to add sgr string, and to use
24921 # ISO-2022 strings for rmacs/smacs -TD
24924 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
24927 # * improved putty entry -Robert de Bath
24930 # * remove dch/dch1 from rxvt because they are implemented inconsistently
24931 # with the common usage of bce/ech -TD
24932 # * remove khome from vt220 (vt220's have no home key) -TD
24933 # * add rxvt+pcfkeys -TD
24936 # * modify several entries to ensure xterm mouse and cursor visibility
24937 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
24938 # Eterm, screen. (The xterm entries are left alone - old ones for
24939 # compatibility, and the new ones do not require this change) -TD
24942 # * add morphos entry -Pavel Fedin
24943 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
24944 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
24947 # * update wsvt25 entry -TD
24950 # * update pairs for xterm-88color and xterm-256color to reflect the
24951 # ncurses extended-color support -TD
24954 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
24955 # * add aixterm-16color to demonstrate 16-color capability -TD
24958 # * add media-copy to vt100 -TD
24959 # * corrected acsc string for vt52 -TD
24962 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
24964 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
24967 # * re-corrected acsc string for vt52 -TD
24970 # * corrected sun-il sgr string which referred to bold and underline -TD
24971 # * add sun-color entry -TD
24974 # * modify sgr0 in several entries to reset alternate-charset as in the
24976 # * modify sgr string of prism9 to better match the individual
24980 # * correct order of use= in rxvt-basic -TD
24983 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
24986 # * other minor fixes to cygwin based on tack -TD
24987 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
24990 # * add nsterm-16color entry -TD
24991 # * remove ncv flag from xterm-16color -TD
24992 # * remove setf/setb from xterm-256color to match xterm #209 -TD
24993 # * update mlterm entry to 2.9.2 -TD
24996 # * fixes to make nsterm-16color match report
24997 # by Christian Ebert -Alain Bench
25000 # * add xterm+256color building block -TD
25001 # * add gnome-256color, putty-256color, rxvt-256color -TD
25004 # * add hpterm-color -TD
25007 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
25008 # * add gnome-fc5 (prompted by GenToo #122566) -TD
25009 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
25010 # * improve xterm-256color by combining the ibm+16color setaf/setab
25011 # strings with SGR 48. The setf/setb strings also are cancelled here
25012 # rather than omitted so derived entries will cancel those also -Alain
25016 # * add some notes regarding copyright to terminfo.src -TD
25017 # * use rxvt+pcfkeys in Eterm -TD
25018 # * remove km and flash from gnome, Eterm and rxvt since they do not work
25019 # as one would expect (km sends ESC rather than setting the 8th bit
25021 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
25022 # * add konsole-solaris -TD
25025 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
25026 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
25027 # * modify xterm-24 to inherit from "xterm" -TD
25028 # * add xiterm entry -TD
25029 # * add putty-vt100 entry -TD
25030 # * corrected spelling of Michael A Dorman's name, prompted by
25031 # http://www.advogato.org/person/mdorman/diary.html -TD
25034 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
25035 # * update xterm+pcfkeys to match xterm #216 -TD
25038 # * make descriptions of xterm entries consistent with its terminfo -TD
25041 # * add xfce, mgt -TD
25044 # * correct acsc string in kterm -TD
25047 # * add kon entry -TD
25048 # * remove invis from linux and related entries, add klone+sgr8 for those
25049 # that implement the feature (or have not been shown to lack it) -TD
25052 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
25053 # * minor improvements to rxvt+pcfkeys -TD
25056 # * fix a few typos in if/then/else expressions -TD
25059 # * add several GNU Screen variations with 16- and 256-colors, and
25060 # status line (Alain Bench).
25063 # * add Newbury Data entries (Jean-Charles Billaud).
25066 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
25069 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
25070 # * add konsole-256color entry -TD
25073 # * add 9term entry (request by Juhapekka Tolvanen) -TD
25076 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
25077 # * add shift-control- and control-modified keys for rxvt editing
25079 # * update mlterm entry to 2.9.3 -TD
25080 # * add mlterm+pcfkeys -TD
25083 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
25084 # xterm+pcc0, etc., to make the corresponding building blocks reflect
25085 # xterm's capabilities -TD
25086 # * add mrxvt entry -TD
25087 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
25090 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
25093 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
25094 # xterm starting with xterm patch #216 -TD
25095 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
25096 # to match xterm #230 -TD
25097 # * extend xterm+pccX entries to match xterm #230 -TD
25098 # * add xterm+app, xterm+noapp, from xterm #230 -TD
25099 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
25102 # * add screen.rxvt -TD
25105 # * add screen+fkeys (prompted by Debian #478094) -TD
25108 # * add screen.mlterm -TD
25109 # * improve mlterm and mlterm+pcfkeys -TD
25112 # * add Eterm-256color, Eterm-88color -TD
25113 # * add rxvt-88color -TD
25116 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
25117 # original to teraterm2.3 -TD
25118 # * update "gnome" to 2.22.3 -TD
25119 # * update "konsole" to 1.6.6 -TD
25120 # * add "aterm" -TD
25121 # * add "linux2.6.26" -TD
25124 # * change several \E[2g (clear tab at current column) to \E[3g
25125 # (clear all tabs) to match definition for tbc capability -TD
25128 # * add eterm-color -TD
25131 # * add screen.Eterm -TD
25134 # * correct typo in pfkey of ansi.sys-old
25135 # (report by Kalle Olavi Niemitalo)
25136 # * move function- and cursor-keys from emx-base to ansi.sys, and create
25137 # a pfkey capability which handles F1-F48 -TD
25140 # * add vwmterm entry (Bryan Christ)
25143 # * change ncv and op capabilities in sun-color to match Sun's entry for
25144 # this (report by Laszlo Peter)
25145 # * improve interix smso by using reverse rather than bold (report by
25146 # Kristof Zelechovski).
25149 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
25150 # * add linux-16color (Benjamin Sittler)
25151 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
25152 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
25153 # * add ccc and initc capabilities to xterm-16color -TD
25156 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
25159 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
25162 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
25163 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
25166 # * add bterm (bogl 0.1.18) -TD
25167 # * minor fix to rxvt+pcfkeys -TD
25170 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
25173 # * add several screen-bce.XXX entries -TD
25176 # * modify screen-bce.XXX entries to exclude ech, since screen's color
25177 # model does not clear with color for that feature -TD
25180 # * rename atari and st52 to atari-old, st52-old, use newer entries from
25181 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
25184 # * add mlterm-256color entry -TD
25187 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
25188 # the alternate character set (patch by Nicholas Marriott)
25191 # * improve acsc for vt52 (Benjamin Sittler)
25192 # * modify nsterm entries for consistent sgr/sgr0 -TD
25193 # * modify xnuppc entries for consistent sgr/sgr0 -TD
25194 # * add invis to tek4115 sgr -TD
25197 # * reformat acsc strings to canonical format -TD
25200 # * add "XT" capability to entries for terminals that support both
25201 # xterm-style mouse- and title-controls, for "screen" which
25202 # special-cases TERM beginning with "xterm" or "rxvt" -TD
25205 # * fill in no-parameter forms of cursor-movement where a parameterized
25206 # form is available -TD
25207 # * fill in missing cursor controls where the form of the controls is
25209 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
25212 # * correct comparison used for setting 16-colors in linux-16color
25213 # entry (Novell #644831) -TD
25214 # * improve linux-16color entry, using "dim" for color-8 which makes it
25215 # gray rather than black like color-0 -TD
25218 # * make "vte" the principal entry defining "gnome", since GNOME terminal
25219 # is merely one of several terminals whose behavior is provided by this
25223 # * fix typo in rmso for tek4106 -Goran Weinholt
25226 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
25227 # * also suppress ncv in konsole-base -TD
25230 # * add U8 feature to denote entries for terminal emulators which do not
25231 # support VT100 SI/SO when processing UTF-8 encoding -TD
25232 # * add xterm-utf8 as a demo of the U8 feature -TD
25235 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
25238 # * update minix entry to minix 3.2 (Thomas Cort).
25241 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
25242 # * remove a backslash which continued comment, obscuring altos3
25243 # definition with OpenBSD toolset (Nicholas Marriott).
25246 # * add/use xterm+tmux chunk from xterm #271 -TD
25247 # * resync xterm-new entry from xterm #271 -TD
25248 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
25249 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
25250 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
25253 # * add kich1 to sun (Yuri Pankov)
25254 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
25257 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
25260 # * minor cleanup of X-terminal emulator section -TD
25261 # * add terminator entry -TD
25262 # * add simpleterm entry -TD
25265 # * add xterm+kbs fragment from xterm #272 -TD
25268 # * add pccon entries for OpenBSD console (Alexei Malinin)
25271 # * corrected old changelog comments -TD
25274 # * add putty-sco -TD
25277 # * add mach-gnu (Samuel Thibault)
25278 # * add mach-gnu-color, tweaks to mach-gnu -TD
25279 # * make sgr for sun-color agree with smso -TD
25280 # * make sgr for prism9 agree with other caps -TD
25281 # * make sgr for icl6404 agree with other caps -TD
25282 # * make sgr for ofcons agree with other caps -TD
25283 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
25284 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
25285 # * make sgr for avt-ns agree with other caps -TD
25288 # * make sgr for xterm-pcolor agree with other caps -TD
25289 # * make sgr for att5425 agree with other caps -TD
25290 # * make sgr for att630 agree with other caps -TD
25291 # * make sgr for linux entries agree with other caps -TD
25292 # * make sgr for tvi9065 agree with other caps -TD
25293 # * make sgr for ncr260vt200an agree with other caps -TD
25294 # * make sgr for ncr160vt100pp agree with other caps -TD
25295 # * make sgr for ncr260vt300an agree with other caps -TD
25296 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
25297 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
25300 # * correct order of use-clauses in st-256color -TD
25303 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
25306 # * document all of the user-defined capabilities in one place -TD
25307 # * add XT to some places to improve usefulness for other applications
25308 # than screen, which would like to pretend that xterm's title is
25309 # a status-line. -TD
25310 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
25311 # of ordering and overrides -TD
25314 # * add msgr to vt420, similar DEC vtXXX entries -TD
25315 # * add several missing vt420 capabilities from vt220 -TD
25316 # * factor out ansi+pp from several entries -TD
25317 # * change xterm+sl and xterm+sl-twm to include only the status-line
25318 # capabilities and not "use=xterm", making them more generally useful
25319 # as building-blocks -TD
25320 # * add dec+sl building block, as example -TD
25323 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
25324 # * add eslok flag to dec+sl -TD
25325 # * dec+sl applies to vt320 and up -TD
25326 # * drop wsl width from xterm+sl -TD
25327 # * reuse xterm+sl in putty and nsca-m -TD
25328 # * add ansi+tabs to vt520 -TD
25329 # * add ansi+enq to vt220-vt520 -TD
25332 # * remove p6 (bold) from opus3n1+ for consistency -TD
25333 # * remove acs stuff from env230 per clues in Ingres termcap -TD
25334 # * modify env230 sgr/sgr0 to match other capabilities -TD
25335 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
25336 # * make sgr for dku7202 agree with other caps -TD
25337 # * make sgr for ibmpc agree with other caps -TD
25338 # * make sgr for tek4107 agree with other caps -TD
25339 # * make sgr for ndr9500 agree with other caps -TD
25340 # * make sgr for sco-ansi agree with other caps -TD
25341 # * make sgr for d410 agree with other caps -TD
25342 # * make sgr for d210 agree with other caps -TD
25343 # * make sgr for d470c, d470c-7b agree with other caps -TD
25346 # * rewrite vt520 entry based on vt420 -TD
25347 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
25350 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
25351 # analysis by Martin Husemann).
25352 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
25353 # Onno van der Linden).
25354 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
25355 # * add kdch1, etc., to qvt108 -TD
25356 # * add dl1/il1 to some entries based on dl/il values -TD
25357 # * add dl to simpleterm -TD
25360 # * modify some older xterm entries to align with xterm source -TD
25361 # * separate "xterm-old" alias from "xterm-r6" -TD
25364 # * add E3 to xterm-basic and putty -TD
25367 # * add nsterm-256color, make this the default nsterm -TD
25368 # * remove bw from nsterm-bce, per testing with tack -TD
25371 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
25372 # (patch by Christian Persch).
25375 # * reviewed vte-2012, reverted most of the change since it was incorrect
25376 # based on testing with tack -TD
25377 # * un-cancel the initc in vte-256color, since this was implemented
25378 # starting with version 0.20 in 2009 -TD
25381 # * correct typo in sgr string for sun-color,
25382 # add bold for consistency with sgr,
25383 # change smso for consistency with sgr -TD
25384 # * correct typo in sgr string for terminator -TD
25385 # * add blink to the attributes masked by ncv in linux-16color (report
25386 # by Benjamin Sittler)
25389 # * change initialization for vt220, similar entries for consistency
25390 # with cursor-key strings (NetBSD #47674) -TD
25391 # * further improvements to linux-16color (Benjamin Sittler)
25394 # * move nsterm-related entries out of "obsolete" section to more
25395 # plausible "ansi consoles" -TD
25396 # * additional cleanup of table-of-contents by reordering -TD
25399 # * added note to clarify Terminal.app's non-emulation of the various
25400 # terminal types listed in the preferences dialog -TD
25403 # * use TS extension to describe xterm's title-escapes -TD
25404 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
25405 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
25406 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
25407 # (Debian #727119).
25408 # * simplify pfkey expression in ansi.sys -TD
25411 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
25414 # * updated notes for wsvt25 based on tack and vttest -TD
25415 # * add teken entry to show actual properties of FreeBSD's "xterm"
25419 # * add terminology entry -TD
25420 # * add mlterm3 entry, use that as "mlterm" -TD
25421 # * inherit mlterm-256color from mlterm -TD
25424 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
25427 # * cancel ccc in putty-256color and konsole-256color for consistency
25428 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
25429 # * add xterm+256setaf building block for various terminals which only
25430 # get the 256-color feature half-implemented -TD
25431 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
25435 # * add vt520ansi (Mike Gran)
25438 # * correct several entries which had termcap-style padding used in
25439 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
25440 # * correct syntax for padding in some entries: dg211, h19 -TD
25441 # * correct ti924-8 which had confused padding versus octal escapes -TD
25442 # * correct padding in sbi entry -TD
25445 # * update xterm-new to xterm patch #305 -TD
25446 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
25447 # (italic). This was a long-ago typo in screen 3.1.1 which was
25448 # overlooked until a few terminal emulators implemented the feature -TD
25451 # > fix regression in screen terminfo entries (reports by Christian
25452 # Ebert, Gabriele Balducci) -TD
25453 # + revert the change to screen; see notes for why this did not work -TD
25454 # + cancel sitm/ritm for entries which extend "screen", to work around
25455 # screen's hardcoded behavior for SGR 3 -TD
25458 # + modify sgr for screen.xterm-new to support dim capability -TD
25459 # + add dim capability to nsterm+7 -TD
25460 # + cancel dim capability for iterm -TD
25461 # + add dim, invis capabilities to vte-2012 -TD
25462 # + add sitm/ritm to konsole-base and mlterm3 -TD
25465 # + add xterm-1005 and xterm-1006 entries, with suggested extension
25466 # capability "xm" -TD
25469 # + update test-report for mrxvt -TD
25472 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
25475 # + reviewed terminology 0.6.1, add function key definitions. None of
25476 # the vt100-compatibility issues were improved -TD
25479 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
25480 # + add several key definitions to nsterm-bce to match preconfigured
25481 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
25484 # + remove unnecessary ';' from E3 capabilities -TD
25485 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
25486 # + split-out recent change to nsterm-bce as nsterm-build326, and add
25487 # nsterm-build342 to reflect changes with successive releases of OSX
25488 # (discussion with Leonardo B Schenkel)
25489 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
25493 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
25494 # + add several screen.XXX entries to support the respective variations
25495 # for 256 colors -TD
25498 # + add putty+fnkeys* building-block entries -TD
25501 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
25502 # + add vte-2014, update vte to use that -TD
25505 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
25506 # from xterm-new (report by Richard Birkett) -TD
25509 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
25510 # + fixes for st 0.5 from testing with tack -TD
25513 # + updated minitel entries to fix kel problem with emacs, and add
25514 # minitel1b-nb (Alexandre Montaron).
25515 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
25516 # + replace some dead URLs in commands with equivalents from the
25517 # Internet Archive -TD
25520 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
25521 # + add keys f12-f124 to pccon+keys (Tati Chevron).
25524 # + fix some inconsistencies in the pccon* entries -TD
25527 # + add viewdata (Alexandre Montaron).
25530 # + tidy up comments about hardcoded 256color palette (report by
25531 # Leonardo Brondani Schenkel) -TD
25532 # + add putty-noapp entry, and amend putty entry to use application mode
25533 # for better consistency with xterm (report by Leonardo Brondani
25537 # + add 'oc' capability to xterm+256color, allowing palette reset for
25541 # + modify linux2.6 entry to improve line-drawing -TD
25542 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
25545 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
25546 # reset palette using "oc" string as in linux -TD
25549 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
25550 # that could be returned -TD
25551 # + added a few capabilities fixed in recent vte -TD
25554 # + correct a typo in interix -TD
25557 # + updated minitel entries to use status line with screen(1), as well as
25558 # printing special G2 videotex chars like french accentuated glyph
25559 # using special cap XC= (patch by Alexandre Montaron).
25562 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
25563 # + correct rs2 string for vt100-nam -TD
25566 # + modify linux-16color to not mask dim, standout or reverse with the
25567 # ncv capability -TD
25568 # + add 0.1sec mandatory delay to flash capabilities using the VT100
25569 # reverse-video control -TD
25570 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
25571 # entry, to avoid conflict with the user-defined mapping. The reset
25572 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
25575 # + merge current st description (report by Harry Gindi) -TD
25578 # + modify flash capability for linux and wyse entries to put the delay
25579 # between the reverse/normal escapes rather than after -TD
25582 # + minor comment-fixes to help automate links to bug-urls -TD
25583 # + add dvtm, dvtm-256color -TD
25584 # + add settings corresponding to xterm-keys option to tmux entry to
25585 # reflect upcoming change to make that option "on" by default
25586 # (patch by Nicholas Marriott).
25587 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
25588 # + add dumb-emacs-ansi -TD
25591 # + correct a few spelling errors in comments -TD
25595 # + add vt100+4bsd building block, use that for older terminals rather
25596 # than "vt100" which is now mostly used as a building block for
25597 # terminal emulators -TD
25598 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
25599 # (report/analysis by Robert King) -TD
25602 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
25603 # + add smso for env230, to match sgr -TD
25604 # + remove p7/protect from sgr in fbterm -TD
25605 # + drop setf/setb from fbterm; setaf/setab are enough -TD
25606 # + make xterm-pcolor sgr consistent with other capabilities -TD
25607 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
25608 # (discussion with Nicholas Marriott)
25611 # + correct missing comma-separator between string capabilities in
25612 # icl6402 and m2-nam -TD
25613 # + update formatting with ncurses 6.0.20170422 -TD
25614 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
25615 # add alias ansiterm (report by Robert King).
25618 # + reformatted using hexadecimal numbers to improve readability -TD
25621 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
25622 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
25623 # + add "rep" to xterm-new, available since 1997/01/26 -TD
25624 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
25628 # + update "iterm" entry -TD
25629 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
25632 # + update notes on user-defined capabilities -TD
25635 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
25638 # + add "op" to xterm+256setaf -TD
25639 # + reviewed terminology 1.0.0 -TD
25640 # + reviewed st 0.7 -TD
25643 # + modify old terminology entry and a few other terminal emulators to
25644 # account for xon -TD
25645 # + correct sgr string for tmux, which used screen's "standout" code
25646 # rather than the standard code (patch by Roman Kagan)
25647 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
25648 # those correspond to the non-sgr settings where they differ, but
25649 # otherwise use ECMA-48 consistently:
25650 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
25651 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
25652 # st-0.7, vi603, vwmterm -TD
25655 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
25656 # blocks from xterm #331 -TD
25657 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
25659 # + modify xterm+256color and xterm+256setaf to use correct number of
25660 # color pairs, for ncurses 6.1 -TD
25661 # + add rs1 capability to xterm-256color -TD
25662 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
25663 # match xterm #272, reflecting packager's changes -TD
25664 # + remove "boolean" Se, Ss from st-0.7 -TD
25667 # + add konsole-direct and st-direct -TD
25668 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
25669 # direct-colors are wanted -TD
25672 # + add vte-direct -TD
25673 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
25677 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
25678 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
25679 # mode does not work with those programs. konsole is debatable -TD
25680 # + add "termite" entry (report by Markus Pfeiffer) -TD
25683 # + trim "XT" from screen entry -TD
25684 # + modify iterm to use xterm+sl-twm building block -TD
25685 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
25686 # konsole's removal in 2008 -TD
25687 # + expanded the history section of konsole to explain its flawed
25688 # imitation of xterm's keyboard -TD
25689 # + use xterm+x11mouse in screen.* entries because screen does not yet
25690 # support xterm's 1006 mode -TD
25691 # + add nsterm-build400 for macOS 10.13 -TD
25692 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
25693 # + update vte to vte-2017 -TD
25694 # + add ecma+strikeout to vte-2017 -TD
25695 # + add iterm2-direct -TD
25696 # + updated teraterm, added teraterm-256color -TD
25697 # + add mlterm-direct -TD
25698 # + add descriptions for ANSI building-blocks -TD
25700 ######## SHANTIH! SHANTIH! SHANTIH!