1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2012/08/11 15:27:54 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+csr|ansi scroll-region plus cursor save & restore,
380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
382 # The normal (ANSI) flavor of "media copy" building block asserts that
383 # characters sent to the printer do not echo on the screen. DEC terminals
384 # can also be put into autoprinter mode, where each line is sent to the
385 # printer as you move off that line, e.g., by a carriage return.
386 ansi+pp|ansi printer port,
388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
389 dec+pp|DEC autoprinter mode,
390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
392 # The IBM PC alternate character set. Plug this into any Intel console entry.
393 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
394 # ROM graphics for control characters such as the diamond, up- and down-arrow.
395 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
396 # will work with any Intel console, they all seem to have inherited \E[11m
397 # from the ANSI.SYS de-facto standard.
398 klone+acs|alternate character set for ansi.sys displays,
399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
400 rmacs=\E[10m, smacs=\E[11m,
402 # Highlight controls corresponding to the ANSI.SYS standard. Most
403 # console drivers for Intel boxes obey these. Makes the same assumption
404 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
405 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
406 klone+sgr|attribute control for ansi.sys displays,
407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
408 rmso=\E[m, rmul=\E[m,
409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
413 # Most Intel boxes do not treat "invis" (invisible) text.
414 klone+sgr8|attribute control for ansi.sys displays,
416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
419 # Highlight controls corresponding to the ANSI.SYS standard. *All*
420 # console drivers for Intel boxes obey these. Does not assume \E[11m will
421 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
422 # diamond and arrow characters under curses.
423 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
430 # KOI8-R (RFC1489) acs (alternate character set)
431 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
432 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
434 rmacs=\E[10m, smacs=\E[11m,
436 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
437 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
438 # but equivalent strings that don't rely on that coincidence:
439 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
440 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
441 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
442 # They match a subset of ECMA-48.
443 klone+color|color control for ansi.sys and ISO6429-compatible displays,
444 colors#8, ncv#3, pairs#64,
445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
447 # This is better than klone+color, it doesn't assume white-on-black as the
448 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
449 ecma+color|color control for ECMA-48-compatible terminals,
451 colors#8, ncv#3, pairs#64,
452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
454 # Attribute control for ECMA-48-compatible terminals
455 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
458 # For comparison, here are all the capabilities implied by the Intel
459 # Binary Compatibility Standard (level 2) that fit within terminfo.
460 # For more detail on this rather pathetic standard, see the comments
461 # near the end of this file.
462 ibcs2|Intel Binary Compatibility Standard prescriptions,
463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
472 #### ANSI/ECMA-48 terminals and terminal emulators
474 # See near the end of this file for details on ANSI conformance.
475 # Don't mess with these entries! Lots of other entries depend on them!
477 # This section lists entries in a least-capable to most-capable order.
478 # if you're in doubt about what `ANSI' matches yours, try them in that
479 # order and back off from the first that breaks.
481 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
482 # and more than one page of memory. It uses local motions instead of
483 # direct cursor addressing, and makes almost no assumptions. It does
484 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
485 ansi-mr|mem rel cup ansi,
487 cols#80, lines#24, use=vanilla, use=ansi+erase,
490 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
491 # beware of screen size problems and memory relative cursor addressing.
492 ansi-mini|any ansi terminal with pessimistic assumptions,
494 cols#80, lines#24, use=vanilla, use=ansi+cup,
497 # ansi-mtabs adds relative addressing and minimal tab support
498 ansi-mtabs|any ansi terminal with pessimistic assumptions,
500 ht=^I, use=ansi-mini, use=ansi+local1,
502 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
504 # The following is an entry for the full ANSI 3.64 (1977). It lacks
505 # padding, but most terminals using the standard are "fast" enough
506 # not to require any -- even at 9600 bps. If you encounter problems,
507 # try including the padding specifications.
509 # Note: the :as: and :ae: specifications are not implemented here, for
510 # the available termcap documentation does not make clear WHICH alternate
511 # character set to specify. ANSI 3.64 seems to make allowances for several.
512 # Please make the appropriate adjustments to fit your needs -- that is
513 # if you will be using alternate character sets.
515 # There are very few terminals running the full ANSI 3.64 standard,
516 # so I could only test this entry on one verified terminal (Visual 102).
517 # I would appreciate the results on other terminals sent to me.
519 # Please report comments, changes, and problems to:
521 # U.S. MAIL: Hugh Hansard
524 # Atlanta, GA. 30322.
526 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
528 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
529 ansi77|ansi 3.64 standard 1977 version,
531 cols#80, it#8, lines#24,
532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
539 smso=\E[7m, smul=\E[4m,
541 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
542 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
543 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
544 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
545 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
546 # to confuse many emulators. On the other hand, we can count on these programs
547 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
548 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
549 # ANSI.SYS influence.
550 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
551 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
553 cols#80, it#8, lines#24,
554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
560 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
561 lines#25, use=pcansi-m,
562 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
563 lines#33, use=pcansi-m,
564 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
565 lines#43, use=pcansi-m,
566 # The color versions. All PC emulators do color...
567 pcansi|ibm-pc terminal programs claiming to be ansi,
568 use=klone+color, use=pcansi-m,
569 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
570 lines#25, use=pcansi,
571 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
572 lines#33, use=pcansi,
573 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
574 lines#43, use=pcansi,
576 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
577 # If you want pound signs rather than dollars, replace `B' with `A'
578 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
580 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
590 vpa=\E[%i%p1%dd, use=pcansi-m,
592 ansi+enq|ncurses extension for ANSI ENQ,
593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
596 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
597 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
598 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
599 ansi|ansi/pc-term compatible with color,
600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
603 # all the normal ANSI stuff with no extensions. It assumes
604 # insert/delete line/char is there, so it won't work with
605 # vt100 clones. It assumes video attributes for bold, blink,
606 # underline, and reverse, which won't matter much if the terminal
607 # can't do some of those. Padding is assumed to be zero, which
608 # shouldn't hurt since xon/xoff is assumed.
609 ansi-generic|generic ansi standard terminal,
611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
612 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
614 use=ansi+sgrbold, use=ansi+arrows,
616 #### DOS ANSI.SYS variants
618 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
619 # documentation (except for the keyboard key reassignment feature, which
620 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
621 # though undocumented. The <pfkey> capability is untested but should work for
622 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
623 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
624 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
625 OTbs, am, mir, msgr, xon,
627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
632 u7=\E[6n, use=klone+color, use=klone+sgr8,
634 # Keypad: Home=\0G Up=\0H PrPag=\0I
635 # ka1,kh kcuu1 kpp,ka3
637 # Left=\0K 5=\0L Right=\0M
640 # End=\0O Down=\0P NxPag=\0Q
641 # kc1,kend kcud1 kc3,knp
646 # On keyboard with 12 function keys,
647 # shifted f-keys: F13-F24
648 # control f-keys: F25-F36
649 # alt f-keys: F37-F48
650 # The shift/control/alt keys do not modify each other, but alt overrides both,
651 # and control overrides shift.
653 # <pfkey> capability for F1-F48 -TD
654 ansi.sys|ANSI.SYS 3.1 and later versions,
655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
671 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
672 # This should only be used when the terminal emulator cannot redefine the keys.
673 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
674 # definitions must be restored. If the terminal emulator is quit while in vi
675 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
676 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
677 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
678 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
679 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
680 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
681 # Consequently the End keypad key could not be set (it is relatively safe and
682 # actually useful because it sends ^@ O, which beeps and opens a line above).
683 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
689 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
690 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
695 # See ansi.sysk and nansi.sys above.
696 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
701 #### ANSI console types
704 # Atari ST terminals.
705 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
707 tw52|tw52-color|Toswin window manager with color,
709 colors#16, pairs#256,
710 oc=\Eb?\Ec0, op=\Eb?\Ec0,
711 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
712 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
713 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
714 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
716 tw52-m|Toswin window manager monochrome,
719 bold=\Eya, dch1=\Ea, dim=\EyB,
720 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
721 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
722 smso=\EyQ, smul=\EyH, use=at-m,
723 tt52|Atari TT medium and high resolution,
724 lines#30, use=at-color,
725 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
727 colors#16, pairs#256,
728 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
729 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
730 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
731 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
732 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
734 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
736 cols#80, it#8, lines#24,
737 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
738 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
739 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
740 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
741 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
742 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
743 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
744 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
745 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
746 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
747 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
748 tw100|toswin vt100 window mgr,
750 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
751 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
752 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
753 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
754 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
755 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
756 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
757 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
758 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
759 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
760 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
761 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
762 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
763 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
764 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
765 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
766 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
767 rmso=\E[m, rmul=\E[m,
768 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
770 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
771 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
772 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
773 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
774 # The entries for stv52 and stv52pc probably need a revision.
775 stv52|MiNT virtual console,
777 cols#80, it#8, lines#30,
778 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
779 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
780 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
781 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
782 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
783 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
784 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
785 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
786 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
787 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
788 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
789 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
790 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
791 stv52pc|MiNT virtual console with PC charset,
793 cols#80, it#8, lines#30,
794 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
795 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
796 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
797 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
798 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
799 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
800 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
801 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
802 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
803 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
804 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
805 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
806 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
812 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
815 cols#80, it#8, lines#25,
816 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
817 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
818 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
819 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
820 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
821 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
822 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
824 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
826 # MiNT VT52 emulation. 80 columns, 25 rows.
827 # MiNT is Now TOS, the operating system which comes with all Ataris now
828 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
829 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
830 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
831 st52-old|Atari ST with VT52 emulation,
834 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
835 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
836 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
837 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
838 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
839 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
840 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
841 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
842 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
847 # BeOS entry for Terminal program Seems to be almost ANSI
848 beterm|BeOS Terminal,
849 am, eo, mir, msgr, xenl, xon,
850 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
851 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
852 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
853 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
854 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
855 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
856 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
857 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
858 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
859 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
860 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
861 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
862 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
863 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
864 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
865 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
866 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
867 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
868 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
869 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
875 # This entry is good for the 1.2.13 or later version of the Linux console.
877 # ***************************************************************************
880 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
881 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
882 # * character. Here are the keymap replacement lines that will set this up: *
884 # keycode 15 = Tab Tab
885 # alt keycode 15 = Meta_Tab
886 # shift keycode 15 = F26
887 # string F26 ="\033[Z"
889 # * This has to use a key slot which is unfortunate (any unused one will *
890 # * do, F26 is the higher-numbered one). The change ought to be built *
891 # * into the kernel tables. *
893 # ***************************************************************************
895 # All linux kernels since 1.2.13 (at least) set the screen size
896 # themselves; this entry assumes that capability.
898 linux-basic|linux console,
899 am, bce, eo, mir, msgr, xenl, xon,
901 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
902 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
903 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
904 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
905 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
906 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
907 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
908 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
909 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
910 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
911 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
912 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
913 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
914 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
915 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
916 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
917 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
918 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
919 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
920 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
921 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
924 linux-m|Linux console no color,
926 setab@, setaf@, setb@, setf@, use=linux,
928 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
929 # and it matters, turn off <ccc>. The %02x escape used to implement this is
930 # not supposedly back-portable to older SV curses (although it has worked fine
931 # on Solaris for several years) and not supported in ncurses versions before
933 linux-c-nc|linux console with color-change,
935 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
936 oc=\E]R, use=linux-basic,
937 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
938 linux-c|linux console 1.3.6+ for older ncurses,
940 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
941 oc=\E]R, use=linux-basic,
943 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
944 # get a block cursor for cvvis.
945 # reported by Frank Heckenbach <frank@g-n-u.de>.
946 linux2.2|linux 2.2.x console,
947 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
948 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
950 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
951 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
952 # Using SI/SO has the drawback that it confuses screen. SCS would work.
953 # However, SCS is buggy (see comment in Debian #515609) -TD
954 # Further, this breaks longstanding workarounds for Linux console's line
955 # drawing (see Debian 665959) -TD
956 linux2.6|linux 2.6.x console,
958 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
959 sgr0=\E[m\017, smacs=^N, use=linux2.2,
961 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
962 # It is the same as xterm's erase-saved-lines feature.
963 linux3.0|linux 3.0 kernels,
964 E3=\E[3;J, use=linux2.6,
966 # This is Linux console for ncurses.
970 # Subject: linux 2.6.26 vt back_color_erase
971 # Changes to the Linux console driver broke bce model as reported in
972 # https://bugzilla.novell.com/show_bug.cgi?id=418613
974 # http://lkml.org/lkml/2008/4/26/305
975 # http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
976 linux2.6.26|linux console w/o bce,
979 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
980 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
981 ich@, ich1@, use=linux,
983 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
984 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
985 linux-koi8|linux with koi8 alternate character set,
986 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
987 use=linux, use=klone+koi8acs,
989 # Another entry for KOI8-r with Qing Long's acsc.
990 # (which one better complies with the standard?)
991 linux-koi8r|linux with koi8-r alternate character set,
992 use=linux, use=klone+koi8acs,
994 # Entry for the latin1 and latin2 fonts
995 linux-lat|linux with latin1 or latin2 alternate character set,
996 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
999 # This uses graphics from VT codeset instead of from cp437.
1000 # reason: cp437 (aka "straight to font") is not functional under luit.
1001 # from: Andrey V Lukyanov <land@long.yar.ru>.
1002 linux-vt|linux console using VT codes for graphics,
1003 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1004 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1007 # This is based on the Linux console (relies on the console to perform some
1008 # of the functionality), but does not recognize as many control sequences.
1009 # The program comes bundled with an old (circa 1998) copy of the Linux
1010 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1011 # \E* move cursor to home, as as \E[H
1013 # \EE move cursor to beginning of row
1014 # \E[y,xf same as \E[y,xH
1016 # Note: The status-line support is buggy (dsl does not work).
1017 kon|kon2|jfbterm|Kanji ON Linux console,
1019 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1020 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1023 # 16-color linux console entry; this works with a 256-character
1024 # console font but bright background colors turn into dim ones when
1025 # you use a 512-character console font. This uses bold for bright
1026 # foreground colors and blink for bright background colors.
1027 linux-16color|linux console with 16 colors,
1028 colors#16, ncv#54, pairs#256,
1029 setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m,
1030 setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m,
1033 # bterm (bogl 0.1.18)
1034 # Implementation is in bogl-term.c
1035 # Key capabilities from linux terminfo entry
1038 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1039 # bterm does not support sgr, since it only processes one parameter -TD
1040 bterm|bogl virtual terminal,
1042 colors#8, cols#80, lines#24, pairs#64,
1043 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1044 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1045 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1046 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1047 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1048 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1049 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1050 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1051 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1052 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1053 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1054 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1055 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1056 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1061 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1064 cols#80, it#8, lines#25,
1065 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1066 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1067 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1068 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1069 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1070 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1071 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1072 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1073 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1074 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1075 smso=\E[7m, smul=\E[4m,
1076 mach-bold|Mach Console with bold instead of underline,
1077 rmul=\E[0m, smul=\E[1m, use=mach,
1078 mach-color|Mach Console with ANSI color,
1080 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1081 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1083 # From: Samuel Thibault
1084 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1085 # Files: i386/i386at/kd.c
1087 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1089 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1090 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1091 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1092 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1093 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
1096 mach-gnu-color|Mach Console with ANSI color,
1098 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1099 setaf=\E[3%p1%dm, use=mach-gnu,
1101 # From: Marcus Brinkmann
1102 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1104 # Comments in the original are summarized here:
1106 # hurd uses 8-bit characters (km).
1108 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1110 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1111 # have the eat_newline_glitch. It doesn't support setting or removing tab
1114 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1115 # one byte instead three.
1117 # <ich1> is not included because hurd has insert mode.
1119 # hurd doesn't use ^J for scrolling, because this could put things into the
1120 # scrollback buffer.
1122 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1123 # This is a GNU extension.
1125 # The original has commented-out ncv, but is restored here.
1127 # Reading the source, RIS resets cnorm, but not xmous.
1128 hurd|The GNU Hurd console server,
1129 am, bce, bw, eo, km, mir, msgr, xon,
1130 colors#8, it#8, ncv#18, pairs#64,
1131 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1132 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1133 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1134 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1135 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1136 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1137 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1138 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1139 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1140 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1141 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1142 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1143 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1144 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1145 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1146 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1147 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1148 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1149 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1150 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1151 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1152 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1153 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1154 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1155 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1161 # OSF/1 1.1 Snapshot 2
1162 pmcons|pmconsole|PMAX console,
1165 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
1166 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1167 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1169 # SCO console and SOS-Syscons console for 386bsd
1170 # (scoansi: had unknown capabilities
1171 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1172 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1173 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1174 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1175 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1176 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1177 # on the <smacs>=\E[12m -- esr)
1179 # klone+sgr-dumb is an error since the acsc does not match -TD
1181 # In this description based on SCO's keyboard(HW) manpage list of default
1182 # function key values:
1183 # F13-F24 are shifted F1-F12
1184 # F25-F36 are control F1-F12
1185 # F37-F48 are shift+control F1-F12
1187 # hpa/vpa work in the console, but not in scoterm:
1191 # SCO's terminfo uses
1194 # which do not work (console or scoterm).
1196 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1197 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1198 OTbs, am, bce, eo, xon,
1199 colors#8, cols#80, it#8, lines#25, pairs#64,
1200 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
1201 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1202 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1203 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1204 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1205 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1206 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1207 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1208 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1209 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
1210 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1211 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
1212 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
1213 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
1214 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
1215 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
1216 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
1217 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
1218 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
1219 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
1220 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1221 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
1222 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
1223 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1224 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
1225 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
1226 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1228 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1229 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1230 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1231 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
1232 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1233 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1234 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1235 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1236 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1238 # make this easy to change...
1239 scoansi|SCO Extended ANSI standard crt,
1242 # This actually describes the generic SVr4 display driver for Intel boxes.
1243 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
1244 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
1245 att6386|at386|386at|AT&T WGS 6386 console,
1247 cols#80, it#8, lines#25,
1248 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1249 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
1250 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
1251 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1252 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1253 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1254 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1255 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
1256 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
1257 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
1258 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1259 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
1260 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
1261 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
1262 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
1263 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
1265 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
1266 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1267 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
1268 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1269 pc6300plus|AT&T 6300 plus,
1272 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1273 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1274 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1275 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1276 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1277 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1278 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1279 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1280 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1281 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1283 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1285 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1286 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1287 # is broken. All the special key sequences are broken, making it unusable
1288 # with Emacs. The problem stems from the following:
1290 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1291 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1292 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1293 # uses resizable terminal windows, but the bundled terminal program always
1294 # uses an 80x24 window (and doesn't support seem to support a 132-column
1297 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1298 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1299 # access method".) tam includes support for real, overlapping windows,
1300 # onscreen function key labels, and bitmap graphics. But since the primary
1301 # user interface on the UNIX PC was a GUI program (ua, for "user
1302 # assistant",) and remote administration was considered important for the
1303 # machine, tam also supported VT100-compatible terminals attached to the
1304 # serial port or used across the StarLan network. To simulate the extra keys
1305 # not present on a VT100, users could press ESC and a two-letter sequence,
1306 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1307 # however, were not the same as those sent by the actual Undo key. The
1308 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1309 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1310 # have the full documentation and several programs which use tam. It also
1311 # used an extended terminfo format to describe key sequences, special
1312 # highlighting modes, etc.)
1314 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1315 # there are two sequences for every key-modifier combination (local keyboard
1316 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1317 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1318 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1319 # seem to have been built from the manual describing the VT100 sequences.
1320 # This means it doesn't work for a real live UNIX PC.
1322 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1323 # character set". Rather than the VT100 graphics you might expect, it allows
1324 # up to 8 custom fonts to be loaded at any given time. This means that
1325 # programs expecting VT100 graphics will usually be disappointed. For this
1326 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1327 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1328 # manpage), should you wish to do so:
1330 # SGR10 - Select font 0 - ESC [ 10 m or SO
1331 # SGR11 - Select font 1 - ESC [ 11 m or SI
1332 # SGR12 - Select font 2 - ESC [ 12 m
1334 # SGR17 - Select font 7 - ESC [ 17 m
1336 # Graphics for line drawing are not reliably found at *any* character
1337 # location because the UNIX PC has dynamically reloadable fonts. I use font
1338 # 0 for regular text and font 1 for italics, but this is by no means
1339 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1341 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1342 # distributed terminfo.
1344 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1345 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1346 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1347 # attached by serial cable. In Emacs, even the Undo key works, and many
1348 # applications can now use the F1-F8 keys.
1351 # Terminfo entry for the AT&T Unix PC 7300
1352 # from escape(7) in Unix PC 7300 Manual.
1353 # Somewhat similar to a vt100-am (but different enough
1354 # to redo this from scratch.)
1356 # /***************************************************************
1358 # * FONT LOADING PROGRAM FOR THE UNIX PC
1360 # * This routine loads a font defined in the file ALTFONT
1361 # * into font memory slot #1. Once the font has been loaded,
1362 # * it can be used as an alternative character set.
1364 # * The call to ioctl with the argument WIOCLFONT is the key
1365 # * to this routine. For more information, see window(7) in
1366 # * the PC 7300 documentation.
1367 # ***************************************************************/
1368 # #include <string.h> /* needed for strcpy call */
1369 # #include <sys/window.h> /* needed for ioctl call */
1370 # #define FNSIZE 60 /* font name size */
1371 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1373 # * The file /usr/lib/wfont/special.8.ft comes with the
1374 # * standard PC software. It defines a graphics character set
1375 # * similar to that of the Teletype 5425 terminal. To view
1376 # * this or other fonts in /usr/lib/wfont, use the command
1377 # * cfont <filename>. For further information on fonts see
1378 # * cfont(1) in the PC 7300 documentation.
1381 # struct altfdata /* structure for alt font data */
1383 # short altf_slot; /* memory slot number */
1384 # char altf_name[FNSIZE]; /* font name (file name) */
1388 # int wd; /* window in which altfont will be */
1389 # struct altfdata altf;
1391 # strcpy(altf.altf_name,ALTFONT);
1392 # for (wd =1; wd < 12; wd++) {
1393 # ioctl(wd, WIOCLFONT,&altf);
1397 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1398 # they're confirmed by the man page for the System V display---esr)
1400 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1402 cols#80, it#8, lines#24,
1403 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1404 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1405 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1406 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1407 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1408 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1409 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1410 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1411 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1412 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1413 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1414 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1415 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1416 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1417 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1418 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1419 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1420 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1421 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1422 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1423 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1424 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1427 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1428 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1429 # for the application keypad mode. We have added iris-ansi-ap rather than
1430 # change the original to keypad mode.
1432 # (iris-ansi: added rmam/smam based on init string -- esr)
1434 # This entry, and those derived from it, is used in xwsh (also known as
1435 # winterm). Some capabilities that do not fit into the terminfo model
1436 # include the shift- and control-functionkeys:
1438 # F1-F12 generate different codes when shift or control modifiers are used.
1442 # control-F1 \E[025q
1444 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1445 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1447 # The cursor keys also have different codes:
1448 # control-up \E[162q
1449 # control-down \E[165q
1450 # control-left \E[159q
1451 # control-right \E[168q
1454 # shift-down \E[164q
1455 # shift-left \E[158q
1456 # shift-right \E[167q
1458 # control-tab \[072q
1460 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1462 cols#80, it#8, lines#40,
1463 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1464 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1465 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1466 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1467 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1468 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1469 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1470 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1471 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1472 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1473 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1474 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1475 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1476 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1477 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1478 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1479 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1480 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1481 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1483 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1484 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1485 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1487 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1488 # (T.Dickey 98/1/24)
1489 iris-color|xwsh|IRIX ANSI with color,
1491 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1492 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1493 rmul=\E[24m, rs1=\Ec,
1494 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1495 sitm=\E[3m, use=vt100+enq, use=klone+color,
1498 # The following is a version of the ibm-pc entry distributed with PC/IX,
1499 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1500 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1501 # (the former is untrue, and the latter failed under UCB/man); standout and
1502 # underline modes have been added. Note: this entry describes the "native"
1503 # capabilities of the PC monochrome display, without ANY emulation; most
1504 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1508 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1509 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1510 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1513 # (ibmpcx: this entry used to be known as ibmx.
1514 # It formerly included the following extension capabilities:
1515 # :GC=b:GL=v:GR=t:RT=^J:\
1516 # :GH=\E[196g:GV=\E[179g:\
1517 # :GU=\E[193g:GD=\E[194g:\
1518 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1519 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1520 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1521 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1522 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1523 # what was there before. -- esr)
1524 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1527 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1528 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1529 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1530 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1531 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1532 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1538 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1539 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1540 # right corner without triggering a scroll. The ncurses terminfo library can
1541 # handle this case with the <ich1> capability, and prefers <am> for better
1542 # optimization. Bug: The <op> capability resets attributes.
1543 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1544 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1545 qnx|qnx4|qnx console,
1546 daisy, km, mir, msgr, xhpa, xt,
1547 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1548 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1549 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1550 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1551 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1552 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1553 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1554 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1555 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1556 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1557 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1558 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1559 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1560 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1561 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1562 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1563 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1564 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1565 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1566 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1567 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1568 kext=\377\270, kf1=\377\201, kf10=\377\212,
1569 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1570 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1571 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1572 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1573 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1574 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1575 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1576 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1577 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1578 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1579 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1580 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1581 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1582 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1583 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1584 khlp=\377\350, khome=\377\240, khts=\377\342,
1585 kich1=\377\253, kil1=\377\273, kind=\377\261,
1586 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1587 knp=\377\252, knxt=\377\312, kopn=\377\357,
1588 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1589 kprv=\377\302, krdo=\377\336, kref=\377\354,
1590 kres=\377\360, krfr=\377\347, kri=\377\271,
1591 krmir=\377\313, krpl=\377\362, krst=\377\352,
1592 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1593 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1594 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1595 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1596 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1600 qnxt|qnxt4|QNX4 terminal,
1603 qnxm|QNX4 with mouse events,
1605 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1606 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1607 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1608 smicm=\E/>2h, use=qnx4,
1613 # Monochrome QNX4 terminal or console. Setting this terminal type will
1614 # allow an application running on a color console to behave as if it
1615 # were a monochrome terminal. Output will be through stdout instead of
1616 # console writes because the term routines will recognize that the
1617 # terminal name starts with 'qnxt'.
1619 qnxtmono|Monochrome QNX4 terminal or console,
1623 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1624 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1625 # (TD: derive from original qnx4 entry)
1626 qnxt2|qnx 2.15 serial terminal,
1628 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1629 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1631 # QNX ANSI terminal definition
1634 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1635 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1636 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1637 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1638 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1639 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1640 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1641 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1642 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1643 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1644 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1645 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1646 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1647 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1648 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1649 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1650 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1651 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1652 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1653 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1654 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1655 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1656 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1657 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1658 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1659 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1660 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1661 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1662 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1663 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1664 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1665 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1666 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1667 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1668 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1669 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1670 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1671 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1672 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1673 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1674 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1675 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1676 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1677 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1678 smul=\E[4m, tbc=\E[3g,
1679 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1681 qansi|QNX ansi with console writes,
1682 daisy, xhpa, use=qansi-g,
1684 qansi-t|QNX ansi without console writes,
1687 qansi-m|QNX ansi with mouse,
1689 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1690 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1691 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1692 smicm=\E[>2h, use=qansi,
1694 qansi-w|QNX ansi for windows,
1697 #### OpenBSD consoles
1699 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1701 # The following terminal descriptions for the AMD/Intel PC console
1702 # were prepared based on information contained in the OpenBSD-4.9
1703 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1705 # Added bce based on testing with tack -TD
1706 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1707 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1709 pccon+keys|OpenBSD PC keyboard keys,
1710 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1711 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
1712 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1713 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1714 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1716 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1717 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
1718 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
1719 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1720 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1721 enacs=\E)0$<5>, rmacs=\E(B$<5>,
1722 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
1723 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
1724 pccon+colors|ANSI colors for OpenBSD PC console,
1727 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1728 pccon+base|base capabilities for OpenBSD PC console,
1729 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1730 cols#80, it#8, lines#24,
1731 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
1732 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
1733 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1734 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1735 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1736 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
1737 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
1738 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1739 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
1740 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1741 use=pccon0-m, use=pccon+colors,
1742 pccon-m|OpenBSD PC console without colors,
1743 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1744 pccon|OpenBSD PC console,
1745 use=pccon-m, use=pccon+colors,
1747 #### NetBSD consoles
1749 # pcvt termcap database entries (corresponding to release 3.31)
1750 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1752 # (For the terminfo master file, I translated these into terminfo syntax.
1753 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1754 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1755 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1757 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1758 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1759 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1760 pcvtXX|pcvt vt200 emulator (DEC VT220),
1761 am, km, mir, msgr, xenl,
1763 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1764 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1765 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1766 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1767 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1768 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1769 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1770 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1771 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1772 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1773 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1774 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1775 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1776 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1777 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1778 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1779 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1780 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1781 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1782 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1784 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1785 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1786 # 50 lines entries; 80 columns
1787 pcvt25|dec vt220 emulation with 25 lines,
1789 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1790 pcvt28|dec vt220 emulation with 28 lines,
1792 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1793 pcvt35|dec vt220 emulation with 35 lines,
1795 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1796 pcvt40|dec vt220 emulation with 40 lines,
1798 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1799 pcvt43|dec vt220 emulation with 43 lines,
1801 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1802 pcvt50|dec vt220 emulation with 50 lines,
1804 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1806 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1807 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1808 # 50 lines entries; 132 columns
1809 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1811 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1812 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1814 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1815 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1817 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1818 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1820 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1821 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1823 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1824 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1826 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1828 # OpenBSD implements a color variation
1829 pcvt25-color|dec vt220 emulation with 25 lines and color,
1831 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1832 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1833 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1834 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1835 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1838 # Terminfo entries to enable the use of the ncurses library in colour on a
1839 # NetBSD-arm32 console (only tested on a RiscPC).
1840 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1841 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1842 # typo in invis - TD
1843 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1844 am, bce, msgr, xenl, xon,
1845 cols#80, it#8, lines#30,
1846 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1847 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1848 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1849 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1850 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1851 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1852 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1853 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1854 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1855 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1856 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1857 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1858 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1859 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1860 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1862 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1863 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1864 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1867 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1868 cols#132, lines#50, use=arm100,
1870 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1871 # manufactured by Sharp for the Japenese market.
1872 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1873 x68k|x68k-ite|NetBSD/x68k ITE,
1875 kclr=\E[9~, khlp=\E[28~, use=vt220,
1878 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1880 # (still unfinished, but good enough so far.)
1881 ofcons|DNARD OpenFirmware console,
1884 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
1885 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1886 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1887 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1888 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1889 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1890 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1891 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1892 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1893 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1894 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1895 rmso=\2330m, rmul=\2330m,
1896 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
1897 sgr0=\2330m, smso=\2337m, smul=\2334m,
1899 # NetBSD "wscons" emulator in vt220 mode.
1900 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1901 # The emulator renders underlined text in red. Colors are otherwise usable.
1903 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1904 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1905 # vt220 screens in vttest do not work with this emulator. For instance, it
1906 # identifies itself (primary DA response) as a vt220 with selective erase. But
1907 # the selective erase feature does not work. The secondary response is copied
1908 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1909 # the level of detail in a termcap, it is a passable emulator, since ECH does
1910 # work. Don't use it on a VMS system -TD
1911 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1913 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1914 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
1915 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1916 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1917 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1918 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1919 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1921 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1924 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1926 rcons|BSD rasterconsole,
1928 # Color version of above. Color currently only provided by NetBSD.
1929 rcons-color|BSD rasterconsole with ANSI color,
1932 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1934 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1935 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1936 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1937 # -- compare with cons25w
1939 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1940 colors#8, cols#80, it#8, lines#18, pairs#64,
1941 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1942 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1943 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1944 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1945 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1946 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1947 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1948 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1949 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1950 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1951 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1952 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1953 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1954 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1955 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1956 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1958 #### FreeBSD console entries
1960 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1961 # Andrey Chernov maintains the FreeBSD termcap distributions.
1963 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1964 # or comment out the :cb: capability in the console entry.
1966 # Alexander Lukyanov reports:
1967 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1968 # Now el1 clears not only to the line beginning, but also a large chunk
1969 # of previous line. But there is another bug - ech does not work at all.
1973 # common entry without semigraphics
1974 # Bug: The <op> capability resets attributes.
1975 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1976 # instance el1 does if the cursor is moved to the right margin first. Removed
1977 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1979 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1980 # Note that this disables standout with color.
1982 # The emulator sends difference strings based on shift- and control-keys,
1984 # F13-F24 are shifted F1-F12
1985 # F25-F36 are control F1-F12
1986 # F37-F48 are shift+control F1-F12
1987 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1988 am, bce, bw, eo, msgr, npc,
1989 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1990 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1991 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1992 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1993 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1994 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1995 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1996 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1997 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1998 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1999 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2000 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2001 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2002 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2003 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2004 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2005 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2006 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2007 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2008 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2009 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2010 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2011 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2012 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2013 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2014 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2015 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2016 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2018 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2019 kbs=\177, kdch1=\E[3~, use=cons25,
2020 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2022 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2023 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2024 smul=\E[4m, use=cons25,
2025 cons30|ansi80x30|freebsd console (30-line ansi mode),
2026 lines#30, use=cons25,
2027 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2028 lines#30, use=cons25-m,
2029 cons43|ansi80x43|freebsd console (43-line ansi mode),
2030 lines#43, use=cons25,
2031 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2032 lines#43, use=cons25-m,
2033 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2034 lines#50, use=cons25,
2035 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2036 lines#50, use=cons25-m,
2037 cons60|ansi80x60|freebsd console (60-line ansi mode),
2038 lines#60, use=cons25,
2039 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2040 lines#60, use=cons25-m,
2041 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2042 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2044 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2046 op@, rmul=\E[m, setab@, setaf@,
2047 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2048 smul=\E[4m, use=cons25r,
2049 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2050 lines#50, use=cons25r,
2051 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2052 lines#50, use=cons25r-m,
2053 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2054 lines#60, use=cons25r,
2055 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2056 lines#60, use=cons25r-m,
2057 # ISO 8859-1 FreeBSD console
2058 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2059 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2061 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2063 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2064 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2065 smul=\E[4m, use=cons25l1,
2066 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2067 lines#50, use=cons25l1,
2068 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2069 lines#50, use=cons25l1-m,
2070 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2071 lines#60, use=cons25l1,
2072 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2073 lines#60, use=cons25l1-m,
2075 #### 386BSD and BSD/OS Consoles
2078 # This was the original 386BSD console entry (I think).
2079 # Some places it's named oldpc3|oldibmpc3.
2080 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2081 origpc3|origibmpc3|IBM PC 386BSD Console,
2082 OTbs, am, bw, eo, xon,
2084 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2085 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2086 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2087 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2088 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2089 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2090 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2092 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2093 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2096 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2097 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2098 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2099 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2101 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2102 # Note, the emulator supports many of the additional console features
2103 # listed in the iBCS2 (e.g. character-set selection) though not all
2104 # are described here. This entry really ought to be upgraded.
2105 # Also note, the console will also work with fewer lines after doing
2106 # "stty rows NN", e.g. to use 24 lines.
2107 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2108 # Bug: The <op> capability resets attributes.
2109 bsdos-pc|IBM PC BSD/OS Console,
2110 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2111 use=bsdos-pc-nobold,
2113 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2114 use=klone+color, use=bsdos-pc-m,
2116 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2117 OTbs, am, eo, km, xon,
2118 cols#80, it#8, lines#25,
2119 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2120 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2121 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2122 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2123 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2124 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2125 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2126 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2129 # Old names for BSD/OS PC console used in releases before 4.1.
2130 pc3|BSD/OS on the PC Console,
2131 use=bsdos-pc-nobold,
2132 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2135 # BSD/OS on the SPARC
2136 bsdos-sparc|Sun SPARC BSD/OS Console,
2139 # BSD/OS on the PowerPC
2140 bsdos-ppc|PowerPC BSD/OS Console,
2144 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2146 # Actually (TD pointed this out at the time the acsc string was added):
2147 # vt52 shouldn't define full acsc since most of the cells don't match.
2148 # see vt100 manual page A-31. This is the list that does match:
2157 # The line-drawing happens to work in several terminal emulators, but should
2158 # not be used as a guide to the capabilities of the vt52. Note in particular
2159 # that vt52 does not support line-drawing characters (the scan-X values refer
2160 # to a crude plotting feature) -TD
2163 cols#80, it#8, lines#24,
2164 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2165 cub1=\ED, cud1=\EB, cuf1=\EC,
2166 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2167 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2168 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2170 #### DEC VT100 and compatibles
2172 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2173 # and micro consoles can be found in the `obsolete' section. More details on
2174 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2175 # found near the end of this file.
2177 # Except where noted, these entries are DEC's official terminfos.
2178 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2179 # Engineering for more information. Updated terminfos and termcaps
2180 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2182 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2183 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2184 # its name to Boundless Technologies; see http://www.boundless.com.
2187 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2188 # certainly includes what DEC called the `Level 1 editing extension' codes;
2189 # only the very oldest VT100s lacked these and there probably aren't any of
2190 # those left alive. To capture these, use one of the VT102 entries.
2192 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2193 # since the cursor is left in a different position while in the
2194 # weird state (concept at beginning of next line, vt100 at end
2195 # of this line) so all versions of vi before 3.7 don't handle
2196 # <xenl> right on vt100. The correct way to handle <xenl> is when
2197 # you output the char in column 80, immediately output CR LF
2198 # and then assume you are in column 1 of the next line. If <xenl>
2199 # is on, am should be on too.
2201 # I assume you have smooth scroll off or are at a slow enough baud
2202 # rate that it doesn't matter (1200? or less). Also this assumes
2203 # that you set auto-nl to "on", if you set it off use vt100-nam
2206 # The padding requirements listed here are guesses. It is strongly
2207 # recommended that xon/xoff be enabled, as this is assumed here.
2209 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2210 # tab settings are in non-volatile memory and don't need to be
2211 # reset upon login. Also setting the number of columns glitches
2212 # the screen annoyingly. You can type "reset" to get them set.
2214 # The VT100 series terminals have cursor ("arrows") keys which can operate
2215 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2216 # is the reset state, and is assumed to be the normal state. Application
2217 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2218 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2219 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2220 # was provided primarily as an aid to the porting of VT52 applications. It is
2221 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2222 # applications such as vi will always transmit the <smkx> string. Therefore,
2223 # the definitions for the cursor keys are made to match what the terminal
2224 # transmits after the <smkx> string is transmitted. If the <smkx> string
2225 # is a null string or is not defined, then cursor keys are assumed to be in
2226 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2227 # else the application may fail. It is also expected that applications will
2228 # always transmit the <rmkx> string to the terminal before they exit.
2230 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2231 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2232 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2233 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2234 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2235 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2236 # Enter key transmits the same as the Return key (Note: the Return key
2237 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2238 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2239 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2240 # is normally in Numeric Mode. If an application requires that the keypad be
2241 # in Application Mode then it is expected that the user, or the application,
2242 # will set the TERM environment variable to point to a terminfo entry which has
2243 # defined the <smkx> string to include the codes that switch the keypad into
2244 # Application Mode, and the terminfo entry will also define function key
2245 # fields to match the Application Mode control codes. If the <smkx> string
2246 # is a null string or is not defined, then the keypad is assumed to be in
2247 # Numeric Mode. If the <smkx> string switches the keypad into Application
2248 # Mode, it is expected that the <rmkx> string will contain the control codes
2249 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2250 # applications which transmit the <smkx> string will also always transmit the
2251 # <rmkx> string to the terminal before they exit.
2253 # Here's a diagram of the VT100 keypad keys with their bindings.
2254 # The top line is the name of the key (some DEC keyboards have the keys
2255 # labelled somewhat differently, like GOLD instead of PF1, but this is
2256 # the most "official" name). The second line is the escape sequence it
2257 # generates in Application Keypad mode (where "$" means the ESC
2258 # character). The third line contains two items, first the mapping of
2259 # the key in terminfo, and then in termcap.
2260 # _______________________________________
2261 # | PF1 | PF2 | PF3 | PF4 |
2262 # | $OP | $OQ | $OR | $OS |
2263 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2265 # | $Ow | $Ox | $Oy | $Om |
2266 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2268 # | $Ot | $Ou | $Ov | $Ol |
2269 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2271 # | $Oq | $Or | $Os | enter |
2272 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2275 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2277 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2278 # terminfo guidelines. That is a compromise used to assign the remaining
2279 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2281 vt100+keypad|dec vt100 numeric keypad no fkeys,
2282 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2283 vt100+pfkeys|dec vt100 numeric keypad,
2284 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2286 vt100+fnkeys|dec vt100 numeric keypad,
2287 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2288 kf9=\EOw, use=vt100+pfkeys,
2290 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2291 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2292 # use the 5-key arrangement to model the arrow keys as suggested in the
2293 # terminfo guidelines:
2294 # _______________________________________
2295 # | PF1 | PF2 | PF3 | PF4 |
2296 # | $OP | $OQ | $OR | $OS |
2297 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2299 # | $Ow | $Ox | $Oy | $Om |
2300 # |_ka1__K1_|_________|_ka3__K3_|_________|
2302 # | $Ot | $Ou | $Ov | $Ol |
2303 # |_________|_kb2__K2_|_________|_________|
2305 # | $Oq | $Or | $Os | enter |
2306 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2309 # |___________________|_________|_kent_@8_|
2311 vt220+keypad|dec vt220 numeric keypad,
2312 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2313 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2316 vt100+enq|ncurses extension for vt100-style ENQ,
2317 u8=\E[?1;2c, use=ansi+enq,
2318 vt102+enq|ncurses extension for vt102-style ENQ,
2319 u8=\E[?6c, use=ansi+enq,
2321 # And here, for those of you with orphaned VT100s lacking documentation, is
2322 # a description of the soft switches invoked when you do `Set Up'.
2324 # Scroll 0-Jump Shifted 3 0-#
2325 # | 1-Smooth | 1-British pound sign
2326 # | Autorepeat 0-Off | Wrap Around 0-Off
2328 # | | Screen 0-Dark Bkg | | New Line 0-Off
2329 # | | | 1-Light Bkg | | | 1-On
2330 # | | | Cursor 0-Underline | | | Interlace 0-Off
2331 # | | | | 1-Block | | | | 1-On
2333 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2335 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2336 # | | | 1-On | | | 1-50 Hz
2337 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2338 # | | 1-ANSI | | 1-8 Bits
2339 # | Keyclick 0-Off | Parity 0-Off
2341 # Margin Bell 0-Off Parity Sense 0-Odd
2344 # The following SET-UP modes are assumed for normal operation:
2345 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2346 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2347 # Other SET-UP modes may be set for operator convenience or communication
2348 # requirements; I recommend
2349 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2350 # Unless you have a graphics add-on such as Digital Engineering's VT640
2351 # (and even then, whenever it can be arranged!) you should set
2354 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2355 vt100|vt100-am|dec vt100 (w/advanced video),
2356 OTbs, am, mc5i, msgr, xenl, xon,
2357 cols#80, it#8, lines#24, vt#3,
2358 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2359 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2360 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2361 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2362 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2363 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2364 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2365 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2366 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2367 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2368 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2369 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2370 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2371 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2372 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2373 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2375 vt100nam|vt100-nam|vt100 no automargins,
2376 am@, xenl@, use=vt100-am,
2377 vt100-vb|dec vt100 (w/advanced video) & no beep,
2378 bel@, flash=\E[?5h\E[?5l, use=vt100,
2380 # Ordinary vt100 in 132 column ("wide") mode.
2381 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2383 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2384 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2385 cols#132, lines#14, vt@,
2386 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2388 # vt100 with no advanced video.
2389 vt100-nav|vt100 without advanced video option,
2391 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2393 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2394 cols#132, lines#14, use=vt100-nav,
2396 # vt100 with one of the 24 lines used as a status line.
2397 # We put the status line on the top.
2398 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2401 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2402 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2403 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2404 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2406 # Status line at bottom.
2407 # Clearing the screen will clobber status line.
2408 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2411 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2412 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2414 # Most of the `vt100' emulators out there actually emulate a vt102
2415 # This entry (or vt102-nsgr) is probably the right thing to use for
2418 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2420 vt102-w|dec vt102 in wide mode,
2422 rs3=\E[?3h, use=vt102,
2424 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2425 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2426 # string in the canonical vt100 entry above leaves the screen littered
2427 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2428 # after highlight turnoffs. This entry should fix that, and even leave
2429 # ACS support working, at the cost of making multiple-highlight changes
2430 # slightly more expensive.
2431 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2432 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2433 sgr@, sgr0=\E[m, use=vt102,
2435 # VT125 Graphics CRT. Clear screen also erases graphics
2436 # Some vt125's came configured with vt102 support.
2437 vt125|vt125 graphics terminal,
2439 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2441 # This isn't a DEC entry, it came from University of Wisconsin.
2442 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2445 cols#80, it#8, lines#24, vt#3,
2446 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2447 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2448 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2449 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2450 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2451 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2452 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2453 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2454 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2456 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2457 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2458 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2460 # vt132 - like vt100 but slower and has ins/del line and such.
2461 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2462 # manual and from the ANSI standard, this describes the actual
2463 # terminal. I've never actually used a vt132 myself, so this
2468 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2469 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2471 # This vt220 description maps F5--F9 to the second block of function keys
2472 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2473 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2474 # PF1--PF4 are used as F1--F4.
2477 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2478 OTbs, OTpt, am, mir, msgr, xenl, xon,
2479 cols#80, lines#24, vt#3,
2481 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2482 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2483 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2484 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2485 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2486 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2487 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2488 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2489 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2490 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2491 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2492 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2493 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2494 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2495 rmso=\E[27m, rmul=\E[24m,
2496 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2497 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2498 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2499 smso=\E[7m, smul=\E[4m,
2501 # A much better description of the VT200/220; used to be vt220-8
2502 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2503 # designation to accommodate bug in pcvt -TD
2505 # Here's a picture of the VT220 editing keypad:
2506 # +--------+--------+--------+
2507 # | Find | Insert | Remove |
2508 # +--------+--------+--------+
2509 # | Select | Prev | Next |
2510 # +--------+--------+--------+
2511 vt220|vt200|dec vt220,
2512 OTbs, am, mir, msgr, xenl, xon,
2513 cols#80, it#8, lines#24, vt#3,
2514 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2515 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2516 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2517 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2518 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2519 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2520 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2521 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2522 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2523 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2524 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2525 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2526 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2527 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2528 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2529 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
2530 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2531 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2532 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
2533 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
2535 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2536 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2537 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
2539 vt220-w|vt200-w|DEC vt220 in wide mode,
2541 rs3=\E[?3h, use=vt220,
2542 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2543 OTbs, am, mc5i, mir, msgr, xenl, xon,
2544 cols#80, it#8, lines#24, vt#3,
2545 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2546 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2547 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2548 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2549 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2550 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2551 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2552 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2553 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2554 il=\233%p1%dL, il1=\233L, ind=\ED,
2555 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2556 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2557 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2558 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2559 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2560 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2561 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2562 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2563 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2564 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2565 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2566 rmul=\23324m, rs1=\233?3l, sc=\E7,
2567 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2568 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2569 smso=\2337m, smul=\2334m, tbc=\2333g,
2572 # This vt220 description regards F6--F10 as the second block of function keys
2573 # at the top of the keyboard. This mapping follows the description given
2574 # in the VT220 Programmer Reference Manual and agrees with the labeling
2575 # on some terminals that emulate the vt220. There is no support for an F5.
2576 # See vt220 for an alternate mapping.
2578 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2579 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2580 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2581 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2582 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2584 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2586 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2588 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2589 # (not an official DEC entry!)
2590 # The problem with real vt220 terminals is they don't send escapes when in
2591 # in vt220 mode. This can be gotten around two ways. 1> don't send
2592 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2593 # features of vt100 advanced video which it then has.
2595 # This entry takes the view of putting a vt220 into vt100 mode so
2596 # you can use the escape key in emacs and everything else which needs it.
2598 # You probably don't want to use this on a VMS machine since VMS will think
2599 # it has a vt220 and will get fouled up coming out of emacs
2601 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2602 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2604 vt200-js|vt220-js|dec vt200 series with jump scroll,
2607 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2608 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2609 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2610 ht=^I, il1=\E[L, ind=\ED,
2611 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2612 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2613 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2614 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2615 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2616 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2617 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2619 # This was DEC's vt320. Use the purpose-built one below instead
2620 #vt320|DEC VT320 in vt100 emulation mode,
2623 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2625 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2627 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2629 # These entries are not DEC's official ones, they were purpose-built for the
2630 # VT320. Here are the designer's notes:
2631 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2632 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2633 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2634 # Things that use <knxt> usually use tab anyways... and things that don't use
2635 # tab usually use <knxt> instead...
2636 # kprv is same as tab - Backtab is useless...
2637 # I left out <sgr> because of its RIDICULOUS complexity,
2638 # and the resulting fact that it causes the termcap translation of the entry
2639 # to SMASH the 1k-barrier...
2640 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2641 # (vt320: uncommented <fsl> --esr)
2642 vt320|vt300|dec vt320 7 bit terminal,
2643 am, hs, mir, msgr, xenl,
2644 cols#80, lines#24, wsl#80,
2645 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2646 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2647 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2648 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2649 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2650 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2651 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2652 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2653 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2654 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2655 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2656 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2657 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2658 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2659 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2660 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2661 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2662 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2663 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2665 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2667 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2668 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2669 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2670 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
2671 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2673 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2674 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2676 # We have to init 132-col mode, not 80-col mode.
2677 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2679 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2680 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2682 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2684 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2685 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2688 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2689 # which are pretty much a superset of the VT320. They have the
2690 # host writable status line, yet another different DRCS matrix size,
2691 # and such, but they add the DEC Technical character set, Multiple text
2692 # pages, selectable length pages, and the like. The difference between
2693 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2694 # monitor, the former has 4 planes and a color monitor. These terminals
2695 # support VT131 and ANSI block mode, but as with much of these things,
2696 # termcap/terminfo doesn't deal with these features.
2698 # Note that this entry is are set up in what was the standard way for GNU
2699 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2700 # keys were switched into application mode at the same time the numeric pad
2701 # is switched into application mode. This changes the definitions of the
2702 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2703 # your termcap or terminfo entry,
2705 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2706 # (vt340: string capability "sb=\E[M" corrected to "sr";
2707 # also, added <rmam>/<smam> based on the init string -- esr)
2708 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2709 am, eslok, hs, mir, msgr, xenl, xon,
2710 cols#80, it#8, lines#24, vt#3,
2711 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2712 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2713 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2714 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2715 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2716 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2717 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2718 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2719 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2721 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2722 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2723 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2724 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2725 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2726 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2727 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2728 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2729 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2730 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2731 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2732 tsl=\E[2$~\E[1$}\E[1;%dH,
2734 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2735 # (originally written with vt420 as its primary name, and usable for it).
2737 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2738 # text pages and long text pages with selectable length of the vt340, along
2739 # with left and right margins, rectangular area text copy, fill, and erase
2740 # operations, selected region character attribute change operations,
2741 # page memory and rectangle checksums, insert/delete column, reception
2742 # macros, and other features too numerous to remember right now. TERMCAP
2743 # can only take advantage of a few of these added features.
2745 # Note that this entry is are set up in what was the standard way for GNU
2746 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2747 # keys were switched into application mode at the same time the numeric pad
2748 # is switched into application mode. This changes the definitions of the
2749 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2750 # your termcap entry,
2752 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2753 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2754 # also, added <rmam>/<smam> based on the init string -- esr)
2755 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2756 am, eslok, hs, mir, msgr, xenl, xon,
2757 cols#80, it#8, lines#24, vt#3,
2758 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2759 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2760 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2761 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2762 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2763 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2764 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2765 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2766 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2767 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2768 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2769 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2770 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2771 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2772 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2773 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2774 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2775 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2776 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2777 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2778 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2779 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2780 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
2782 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2783 # a missing <sc> -- esr)
2784 # add msgr and other capabilities from vt220 -TD
2786 am, mir, msgr, xenl, xon,
2787 cols#80, it#8, lines#24, vt#3,
2788 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2789 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2790 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2791 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2792 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2793 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
2794 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2795 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
2796 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
2797 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2798 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
2799 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2800 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
2801 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
2802 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
2803 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
2804 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2805 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2806 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2807 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2808 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2809 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2810 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2811 use=ansi+pp, use=dec+sl, use=ansi+enq,
2813 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2814 # takes two parameters, the key and the string. Translating the key is
2815 # straightforward (keys 1-5 are not defined on real terminals, though some
2816 # emulators define these):
2818 # if (key < 16) then value = key;
2819 # else if (key < 21) then value = key + 1;
2820 # else if (key < 25) then value = key + 2;
2821 # else if (key < 27) then value = key + 3;
2822 # else if (key < 30) then value = key + 4;
2823 # else value = key + 5;
2825 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2826 # There's no provision in terminfo for emitting a string in this format, so the
2827 # application has to know it.
2829 vt420pc|DEC VT420 w/PC keyboard,
2830 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2831 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2832 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2833 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2834 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2835 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2836 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2837 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2838 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2839 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2840 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2841 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2842 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2843 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2844 pctrm=USR_TERM\:vt420pcdos\:,
2845 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2848 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2850 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2852 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2853 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2855 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2856 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2857 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2858 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2859 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2860 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2861 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2866 vt510pc|DEC VT510 w/PC keyboard,
2868 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2873 # The VT520 is a monochrome text terminal capable of managing up to
2874 # four independent sessions in the terminal. It has multiple ANSI
2875 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2876 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2877 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2879 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2880 # [Alt]/[Print Screen] depending upon which keyboard and which
2881 # terminal mode is being used. If Set-Up has been disabled or
2882 # assigned to an unknown key, Set-Up may be entered by pressing
2883 # [F3] as the first key after power up, regardless of keyboard type.
2885 use=ansi+rca, use=vt420, use=ansi+tabs,
2890 #### VT100 emulations
2893 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2894 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2895 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2896 # that this works best with a stock vt100 entry.
2897 dec-vt100|EWAN telnet's vt100 emulation,
2900 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2901 dec-vt220|DOS tnvt200 terminal emulator,
2904 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2905 # anyone who needs PC VT340 emulation. (or anything below that level, for
2906 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2907 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2908 # I can send the address if requested.
2909 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2910 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2911 z340|zstem vt340 terminal emulator 132col 42line,
2913 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2914 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2916 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2918 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2919 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2922 # CRT is shareware. It implements some xterm features, including mouse.
2923 crt|crt-vt220|CRT 2.3 emulating VT220,
2926 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2928 # PuTTY 0.55 (released 3 August 2004)
2929 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2931 # Comparing with 0.51, vttest is much better (only a few problems with the
2932 # cursor position reports and wrapping).
2934 # PuTTY 0.51 (released 14 December 2000)
2936 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2937 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2938 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2939 # to xterm, which is incorrect, since several features are misimplemented:
2941 # Alt+key always sends ESC+key, so 'km' capability is removed.
2943 # Control responses, wrapping and tabs are buggy, failing a couple of
2944 # screens in vttest.
2946 # xterm mouse support is not implemented (unrelease version may).
2948 # Several features such as backspace/delete are optional; this entry documents
2949 # the default behavior -TD
2951 putty|PuTTY terminal emulator,
2952 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
2953 colors#8, it#8, ncv#22, pairs#64, U8#1,
2954 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2955 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2956 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2957 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2958 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2959 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2960 dch=\E[%p1%dP, dch1=\E[P,
2961 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2962 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2963 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
2964 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
2965 ind=^J, indn=\E[%p1%dS,
2966 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2967 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2968 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2969 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
2970 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
2971 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
2972 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
2973 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
2974 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2975 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2976 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2977 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2978 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2979 rmso=\E[27m, rmul=\E[24m,
2980 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2981 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2982 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2983 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2984 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2985 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2986 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J, use=vt102+enq,
2988 vt100-putty|Reset PuTTY to pure vt100,
2989 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2991 # palette is hardcoded...
2992 putty-256color|PuTTY 0.58 with xterm 256-colors,
2993 initc@, use=xterm+256color, use=putty,
2995 # One of the keyboard selections is "VT100+".
2996 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
2997 putty-vt100|VT100+ keyboard layout,
2998 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2999 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3000 kf9=\EOX, use=putty,
3002 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3004 # Use modifiers to obtain function keys past 12:
3007 # F25-F36 - control/alt
3008 # F37-F48 - control/shift
3010 putty-sco|putty with SCO function keys,
3011 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3012 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3013 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3014 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3015 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3016 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3017 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3018 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3019 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3020 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3021 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3022 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
3024 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3025 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3026 # (communication program) which supports:
3028 # - Serial port connections.
3029 # - TCP/IP (telnet) connections.
3030 # - VT100 emulation, and selected VT200/300 emulation.
3031 # - TEK4010 emulation.
3032 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3034 # - Scripts using the "Tera Term Language".
3035 # - Japanese and Russian character sets.
3037 # The program does not come with terminfo or termcap entries. However, the
3038 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3039 # vt52 or doublesize character support; blinking is done with color). Besides
3040 # the HPA, VPA extensions it also implements CPL and CNL.
3042 # All of the function keys can be remapped. This description shows the default
3043 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3044 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3045 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3053 # ANSI colors are implemented, but cannot be combined with video attributes
3054 # except for reverse.
3056 # No fonts are supplied with the program, so the acsc string is chosen to
3057 # correspond with the default Microsoft terminal font.
3059 # Tera Term recognizes some xterm sequences, including those for setting and
3060 # retrieving the window title, and for setting the window size (i.e., using
3061 # "resize -s"), though it does not pass SIGWINCH to the application if the
3062 # user resizes the window with the mouse.
3063 teraterm2.3|Tera Term Pro,
3066 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3067 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3068 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3069 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3070 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3071 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3072 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3073 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3074 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3075 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3076 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3077 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3078 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3079 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3080 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3081 use=klone+color, use=vt100,
3083 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3084 # to choose a Windows OEM font).
3086 # Testing with tack:
3087 # - it does not have xenl (suppress that)
3088 # - underline seems to work with color (modify ncv).
3089 # Testing with vttest:
3090 # - wrapping differs from vt100 (menu 1).
3091 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3093 # - it recognizes the dtterm window controls for reporting size in
3094 # characters and pixels.
3095 # - it passes SIGWINCH.
3096 teraterm4.59|Tera Term Pro,
3099 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3100 kmous=\E[M, use=teraterm2.3,
3105 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3106 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3109 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3110 # for casual (occasional) use. Also fails several of the vttest screens,
3111 # but that is not unusual for vt100 "emulators".
3112 # b) Does not implement vt100 keypad
3113 # c) Recognizes a subset of vt52 controls.
3114 ms-vt100|MS telnet imitating dec vt100,
3116 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3117 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3118 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3120 # Tested with Windows 2000, the telnet application runs in a console window,
3121 # also using 'Terminal' font.
3124 # a) This version has no function keys or numeric keypad. Unlike the older
3125 # version, the numeric keypad is entirely ignored.
3126 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3127 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3129 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3132 # Based on comments from Federico Bianchi:
3134 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3135 # scheme for PF keys.
3137 # and PuTTY wishlist:
3139 # The modifiers are represented as the codes listed above, prefixed to
3140 # the normal sequences. If the modifier is pressed alone, its sequence
3141 # is transmitted twice in succession. If multiple modifiers apply,
3142 # they're transmitted in the order shift, control, alt.
3147 ms-vt100+|vt100+|windows XP vt100+ (sic),
3148 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3149 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3150 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3151 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3152 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3153 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3154 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3155 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3156 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3157 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3158 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3159 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3160 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3161 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3162 knp=\E/, kpp=\E?, use=ms-vt100-color,
3164 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3167 # expect-5.44.1.15/example/tkterm
3168 # a minimal subset of a vt100 (compare with "news-unk).
3170 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3171 tt|tkterm|Don Libes' tk text widget terminal emulator,
3172 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3173 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3174 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3175 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3178 ######## X TERMINAL EMULATORS
3181 # You can add the following line to your .Xdefaults to change the terminal type
3182 # set by the xterms you start up to my-xterm:
3184 # *termName: my-xterm
3186 # System administrators can change the default entry for xterm instances
3187 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3188 # case, xterm will detect and reject an invalid terminal type, falling back
3189 # to the default of xterm.
3192 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3193 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3194 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3195 # as these seem not to work -- esr)
3196 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3197 OTbs, am, km, mir, msgr, xenl, xon,
3198 cols#80, it#8, lines#65,
3199 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3200 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3201 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3202 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3203 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3204 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3205 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3206 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3207 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3208 smso=\E[7m, smul=\E[4m,
3209 # Compatible with the R5 xterm
3210 # (from the XFree86 3.2 distribution, <blink=@> removed)
3211 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3212 # corrected typos in rs2 string - TD
3214 xterm-r5|xterm R5 version,
3215 OTbs, am, km, msgr, xenl,
3216 cols#80, it#8, lines#24,
3217 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3218 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3219 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3220 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3221 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3222 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3223 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3224 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3225 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3226 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3227 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3228 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3229 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3230 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3232 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3234 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3235 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3236 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3237 # Compatible with the R6 xterm
3238 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3239 # added khome/kend, hts based on the R6 xterm code - TD
3240 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3241 # for compatibility with other emulators).
3242 xterm-r6|xterm X11R6 version,
3243 OTbs, am, km, mir, msgr, xenl,
3244 cols#80, it#8, lines#24,
3245 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3246 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3247 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3248 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3249 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3250 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3251 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3253 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3254 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3255 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3256 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3257 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3258 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3259 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3260 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3261 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3262 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3263 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3264 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3265 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3266 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3268 xterm-old|antique xterm version,
3270 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3271 # The name has been changed and some aliases have been removed.
3272 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3273 OTbs, am, bce, km, mir, msgr, xenl, XT,
3274 cols#80, it#8, lines#24, ncv@,
3275 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3276 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3277 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3278 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3279 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3280 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3281 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3282 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3283 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3284 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3286 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3287 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3288 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3289 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3290 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3291 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3292 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3293 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3294 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3295 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3296 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3297 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3298 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3299 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3300 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3301 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3302 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3303 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3304 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3305 use=ecma+color, use=vt220+keypad,
3307 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3308 # codes for F1-F4 except while in VT220 mode.
3309 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3310 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3312 # This version was released in XFree86 3.3.3 (November 1998).
3313 # Besides providing printer support, it exploits a new feature that allows
3314 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3315 # -- the distribution contained incorrect khome/kend values -TD
3316 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3317 blink=\E[5m, ich1@, invis=\E[8m,
3318 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3319 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
3320 rs2=\E[!p\E[?3;4l\E[4l\E>,
3321 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3322 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
3325 # This version was released in XFree86 4.0.
3326 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3328 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3329 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3330 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3331 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3332 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3333 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3334 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3335 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3336 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3337 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3338 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3339 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3340 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3341 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3342 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3343 smcup=\E[?1049h, use=xterm-xf86-v333,
3345 # This version was released in XFree86 4.3.
3346 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3347 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3348 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3350 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3353 # This version was released in XFree86 4.4.
3354 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3355 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3356 rin=\E[%p1%dT, use=xterm-xf86-v43,
3358 xterm-xfree86|xterm terminal emulator (XFree86),
3361 # This version reflects the current xterm features.
3362 xterm-new|modern xterm terminal emulator,
3364 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3365 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3368 # This fragment is for people who cannot agree on what the backspace key
3370 xterm+kbs|fragment for backspace key,
3373 # This fragment describes as much of XFree86 xterm's "pc-style" function
3374 # keys as will fit into terminfo's 60 function keys.
3377 # ---------------------------------
3384 # 8 Shift + Alt + Control
3385 # ---------------------------------
3386 # The meta key may also be used as a modifier in this scheme, adding another
3387 # bit to the parameter.
3388 xterm+pcfkeys|fragment for PC-style fkeys,
3389 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3392 xterm+noapp|fragment with cursor keys in normal mode,
3393 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3396 xterm+app|fragment with cursor keys in application mode,
3397 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3400 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3401 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3402 # the earlier scheme, as noted in the "use=" clauses in this file.
3404 # The original assignments from patch #94 for cursor-keys had some technical
3407 # A parameter for a function-key to represent a modifier is just more
3408 # bits. But for a cursor-key it may change the behavior of the
3409 # application. For instance, emacs decodes the first parameter of a
3410 # cursor-key as a repeat count.
3412 # A parameterized string should (really) not begin with SS3 (\EO).
3413 # Rather, CSI (\E[) should be used.
3415 # For these reasons, the original assignments were deprecated. For
3416 # compatibility reasons, they are still available as a setting of xterm's
3417 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3418 # that might apply to xterm+pcfkeys with different values of that resource.
3419 xterm+pcc3|fragment with modifyCursorKeys:3,
3420 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3421 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3422 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3423 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3424 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3425 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3426 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3427 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3430 xterm+pcc2|fragment with modifyCursorKeys:2,
3431 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3432 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3433 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3434 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3435 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3436 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3437 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3439 xterm+pcc1|fragment with modifyCursorKeys:1,
3440 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3441 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3442 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3443 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3444 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3445 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3447 xterm+pcc0|fragment with modifyCursorKeys:0,
3448 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3449 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3450 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3451 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3452 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3453 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3456 # Here are corresponding fragments from xterm patch #216:
3458 xterm+pcf0|fragment with modifyFunctionKeys:0,
3459 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3460 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3461 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3462 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3463 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3464 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3465 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3466 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3467 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3468 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3469 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3470 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3471 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3472 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3473 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3474 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3475 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3477 xterm+pcf2|fragment with modifyFunctionKeys:2,
3478 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3479 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3480 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3481 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3482 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3483 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3484 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3485 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3486 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3487 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3488 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3489 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3490 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3491 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3492 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3493 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3494 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3495 kf8=\E[19~, kf9=\E[20~,
3497 # Chunks from xterm #230:
3498 xterm+pce2|fragment with modifyCursorKeys:2,
3499 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3500 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3501 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3502 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3503 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3504 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3505 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3506 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3507 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3508 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3509 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3512 xterm+edit|fragment for 6-key editing-keypad,
3513 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3516 xterm+pc+edit|fragment for pc-style editing keypad,
3517 kend=\E[4~, khome=\E[1~,
3519 xterm+vt+edit|fragment for vt220-style editing keypad,
3520 kfnd=\E[1~, kslt=\E[4~,
3523 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3524 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3525 # is shown here (because that is used in mrxvt and mlterm):
3526 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3527 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3528 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3529 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3530 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3531 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3532 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3533 kf63=\E[13;4~, use=xterm+pcf2,
3535 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3536 xterm-basic|modern xterm terminal emulator - common,
3537 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
3538 colors#8, cols#80, it#8, lines#24, pairs#64,
3539 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3540 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3541 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3542 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3543 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3544 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3545 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3546 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3547 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3548 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3549 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
3550 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
3551 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
3552 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
3553 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
3554 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
3556 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3557 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3558 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3559 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3560 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3561 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J,
3562 use=ansi+pp, use=xterm+kbs, use=vt100+enq,
3564 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3565 # In retrospect, something like xterm-r6 was intended here -TD
3566 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3567 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3569 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3570 # If configured to support 88- or 256-colors (which is fairly common in 2009),
3571 # xterm also recognizes the control sequences for initc -TD
3572 xterm-16color|xterm with 16 colors like aixterm,
3574 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3575 use=ibm+16color, use=xterm-new,
3577 # 256-colors is a compile-time feature of XFree86 xterm beginning with
3578 # patch #111 (1999/7/10) -TD
3579 xterm+256color|xterm 256-color feature,
3581 colors#256, pairs#32767,
3582 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3583 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3584 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3587 # 88-colors is a compile-time feature of XFree86 xterm beginning with
3588 # patch #115 (1999/9/18) -TD
3590 # Note that the escape sequences used are the same as for 256-colors - xterm
3591 # has a different table of default color resource values. If built for
3592 # 256-colors, it can still handle an 88-color palette by using the initc
3595 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3596 # which support the xterm+256color feature support the associated initc
3597 # capability. So it is cancelled in the entries which use this and/or the
3598 # xterm+256color block.
3600 # The default color palette for the 256- and 88-colors are different. A
3601 # given executable will have one palette (perhaps compiled-in). If the program
3602 # supports xterm's control sequence, it can be programmed using initc.
3603 xterm+88color|xterm 88-color feature,
3604 colors#88, pairs#7744, use=xterm+256color,
3606 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3607 xterm-256color|xterm with 256 colors,
3608 use=xterm+256color, use=xterm-new,
3609 xterm-88color|xterm with 88 colors,
3610 use=xterm+88color, use=xterm-256color,
3612 # These two are used to demonstrate the any-event mouse support, i.e., by
3613 # using an extended name "XM" which tells ncurses to put the terminal into
3614 # a special mode when initializing the xterm mouse.
3615 xterm-1002|testing xterm-mouse,
3616 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3617 xterm-1003|testing xterm-mouse,
3618 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3620 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
3621 # asked for some of xterm's advanced features to be added to its terminfo
3622 # entry. It defines extended capabilities not found in standard terminfo or
3623 # termcap. These are useful in tmux, for instance, hence the name.
3625 # One caveat in adding extended capabilities in ncurses is that if the names
3626 # are longer than two characters, then they will not be visible through the
3627 # termcap interface.
3629 # Ms modifies the selection/clipboard. Its parameters are
3630 # p1 = the storage unit (clipboard, selection or cut buffer)
3631 # p2 = the base64-encoded clipboard content.
3633 # Ss is used to set the cursor style as described by the DECSCUSR
3634 # function to a block or underline.
3635 # Se resets the cursor style to the terminal power-on default.
3637 # Cs and Cr set and reset the cursor colour.
3638 xterm+tmux|advanced xterm features used in tmux,
3639 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
3640 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
3642 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3643 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3644 # To use it, your decTerminalID resource must be set to 200 or above.
3651 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3652 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3653 colors#8, cols#80, it#8, lines#24, pairs#64,
3654 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3655 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3656 civis=\233?25l, clear=\233H\2332J,
3657 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3658 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3659 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3660 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3661 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3662 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3663 flash=\233?5h$<100/>\233?5l, home=\233H,
3664 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3665 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3666 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3667 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
3668 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3669 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3670 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3671 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3672 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3673 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3674 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3675 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3676 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3677 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3678 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3679 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3681 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3682 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3683 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3684 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3685 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3686 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3687 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3688 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3689 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3692 xterm-hp|xterm with hpterm function keys,
3693 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3694 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3695 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3696 knp=\ES, kpp=\ET, use=xterm-basic,
3698 xterm-sco|xterm with SCO function keys,
3699 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3700 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3701 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3702 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3703 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3704 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3705 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3706 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3707 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3708 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3709 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3710 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3713 # The xterm-new description has all of the features, but is not completely
3714 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3715 # sunKeyboard resource to true:
3716 # + maps the editing keypad
3717 # + interprets control-function-key as a second array of keys, so a
3718 # 12-fkey keyboard can support vt220's 20-fkeys.
3719 # + maps numeric keypad "+" to ",".
3720 # + uses DEC-style control sequences for the application keypad.
3722 xterm-vt220|xterm emulating vt220,
3723 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3724 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3725 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3726 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3727 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3728 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3729 use=xterm+app, use=xterm+edit, use=xterm-basic,
3732 xterm-vt52|xterm emulating dec vt52,
3733 cols#80, it#8, lines#24,
3734 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3735 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3736 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3737 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3738 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3741 xterm-noapp|xterm with cursor keys in normal mode,
3742 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3745 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3746 lines#24, use=xterm-old,
3748 # This is xterm for ncurses.
3749 xterm|xterm terminal emulator (X Window System),
3752 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
3753 # setting the vt100Graphics resource to false.
3754 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
3757 # These building-blocks allow access to the X titlebar and icon name as a
3758 # status line. There are a few problems in using them in entries:
3760 # a) tsl should have a parameter to denote the column on which to transfer to
3762 # b) the "0" code for xterm updates both icon-title and window title. Some
3763 # window managers such as twm (and possibly window managers descended from
3764 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
3765 # don't want to mess with icon-name when using those window managers.
3766 xterm+sl|access X title line and icon name,
3768 dsl=\E]0;\007, fsl=^G, tsl=\E]0;,
3769 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3771 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
3773 # In contrast, this block can be used for a DEC vt320 and up. There are two
3776 # DECSASD (select active status display)
3777 # \E[0$} Main display
3778 # \E[1$} Status line
3780 # DECSSDT (select status line type)
3781 # \E[0$~ No status line
3782 # \E[1$~ Indicator status line
3783 # \E[2$~ Host-writable status line
3785 # The building block assumes that the terminal always shows something at the
3786 # status line (either the indicator, or status line). That is because if no
3787 # status line is used, then the terminal makes that line part of the user
3788 # window, changing its size without notice.
3790 # Because there is no "esl" (enable status line) capability, the "tsl"
3791 # capability ensures that the status line is host-writable. A DEC terminal
3792 # will clear the status line when changing from indicator to host-writable
3795 # Once on the status line, the row part of cursor addressing is ignored. Since
3796 # tsl expects a parameter (to specify the column), the shortest addressing that
3797 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
3799 dec+sl|DEC VTxx status line,
3801 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
3804 # The following xterm variants don't depend on your base version
3806 # xterm with bold instead of underline
3807 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3808 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m,
3809 smso=\E[7m, smul=\E[1m, use=xterm-old,
3811 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3812 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3813 ich@, ich1@, use=xterm,
3814 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3815 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3816 rmcup@, smcup@, use=xterm,
3819 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3820 # (kterm should not invoke DEC Graphics as the alternate character set
3821 # -- Kenji Rikitake)
3822 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3823 # -- MATSUMOTO Shoji)
3824 # kterm implements acsc via built-in table of X Drawable's
3825 kterm|kterm kanji terminal emulator (X window system),
3828 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3829 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3830 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3831 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3832 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3833 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3834 kterm-color|kterm-co|kterm with ANSI colors,
3835 ncv@, use=kterm, use=ecma+color,
3838 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
3839 # variant of xterm which is apparently no longer supported, but are interesting
3840 # because they illustrate SVr4 curses mouse controls - T.Dickey
3841 xtermm|xterm terminal emulator (monocrome),
3842 OTbs, am, km, mir, msgr, xenl,
3843 btns#3, cols#80, it#8, lines#24,
3844 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3845 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3846 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
3847 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3848 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3849 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3850 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
3851 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3852 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3853 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
3854 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
3855 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
3856 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
3857 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
3858 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3859 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3860 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3861 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
3862 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3864 xtermc|xterm terminal emulator (color),
3865 colors#8, ncv#7, pairs#64,
3866 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3867 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3868 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3871 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
3872 # Here's a termcap entry I've been using for xterm_color, which comes
3873 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
3874 # color stuff, I also have a status line defined as the window manager
3875 # title bar. [I have translated it to terminfo -- ESR]
3876 xterm-pcolor|xterm with color used for highlights and status line,
3878 bold=\E[1;43m, rev=\E[7;34m,
3879 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
3880 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
3882 # This describes the capabilities of color_xterm, an xterm variant from
3883 # before ECMA-64 color support was folded into the main-line xterm release.
3884 # This entry is straight from color_xterm's maintainer.
3885 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3886 # The README's with the distribution also say that it supports SGR 21, 24, 25
3887 # and 27, but they are not present in the terminfo or termcap.
3888 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3889 OTbs, am, km, mir, msgr, xenl, XT,
3890 cols#80, it#8, lines#65, ncv@,
3891 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3892 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3893 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3894 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3895 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3896 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3897 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3898 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3899 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3900 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3901 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3902 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3903 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3904 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3905 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3906 rmso=\E[27m, rmul=\E[24m,
3907 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3909 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3910 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3911 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3912 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3914 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3915 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3916 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3917 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3918 # that each of those implements the home, end, delete keys differently.
3920 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3921 # colors; note that this is not compatible with the 5.2 version.
3922 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3923 # match XFree86's xterm.terminfo usage and prevent circular links
3924 xterm-color|nxterm|generic color xterm,
3926 op=\E[m, use=xterm-r6, use=klone+color,
3928 # This entry describes an xterm with Sun-style function keys enabled
3929 # via the X resource setting "xterm*sunFunctionKeys:true"
3930 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
3931 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
3932 # because we want it to be seen as <kcpy>.
3933 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
3934 # with their Sun keyboard labels instead.
3935 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
3936 xterm-sun|xterm with sunFunctionKeys true,
3937 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
3938 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
3939 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
3940 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
3941 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
3942 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
3943 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
3944 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
3945 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
3946 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
3947 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
3948 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
3950 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
3951 cols#80, lines#24, use=xterm-sun,
3954 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3955 gnome-rh62|Gnome terminal,
3957 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3960 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3962 # This implements a subset of vt102 with a random selection of features from
3963 # other terminals such as color and function-keys.
3965 # shift-f1 to shift-f10 are f11 to f20
3967 # NumLock changes the application keypad to approximate vt100 keypad, except
3968 # that there is no escape sequence matching comma (,).
3970 # Other defects observed:
3971 # vt100 LNM mode is not implemented.
3972 # vt100 80/132 column mode is not implemented.
3973 # vt100 DECALN is not implemented.
3974 # vt100 DECSCNM mode is not implemented, so flash does not work.
3975 # vt100 TBC (tab reset) is not implemented.
3976 # xterm alternate screen controls do not restore cursor position properly
3977 # it hangs in tack after running function-keys test.
3978 gnome-rh72|GNOME Terminal,
3980 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3981 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3982 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3983 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3985 # GNOME Terminal 2.0.1 (Redhat 8.0)
3987 # Documentation now claims it implements vt220 (which is demonstrably false).
3988 # However, it does implement ECH, which is a vt220 feature. And there are
3989 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3990 # more of its bugs using vttest.
3992 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3993 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3995 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3996 # operations. Shift-tab generates a distinct sequence so it can be argued
3997 # that it implements kcbt.
3998 gnome-rh80|GNOME Terminal,
4000 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
4001 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4003 # GNOME Terminal 2.2.1 (Redhat 9.0)
4005 # bce and msgr are repaired.
4006 gnome-rh90|GNOME Terminal,
4008 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4009 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4010 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4013 # GNOME Terminal 2.14.2 (Fedora Core 5)
4014 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4015 gnome-fc5|GNOME Terminal,
4017 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4018 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4020 # GNOME Terminal 2.18.1 (2007 snapshot)
4022 # For any "recent" version of gnome-terminal, it is futile to attempt to
4023 # support modifiers on cursor- and keypad keys because the program usually
4024 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
4025 # of the keys (which more/less correspond to the termcap values), and will
4026 # interpret those according to the $TERM value, but others not in the
4027 # terminfo according to some constantly changing set of hacker guidelines -TD
4028 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
4029 use=xterm+pcc2, use=gnome-fc5,
4030 gnome-2007|GNOME Terminal snapshot 2.18.1,
4033 # GNOME Terminal 2.22.3 (2008 snapshot)
4035 # In vttest, it claims to be a vt220 with national replacement character-sets,
4036 # but aside from the identifier string, implements only a small fraction of
4037 # vt220's behavior, which will make it less usable on a VMS system (unclear
4038 # what the intent of the developer is, since the NRC feature exposed in vttest
4039 # by this change does not work).
4040 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4041 use=vte+pcfkeys, use=vte-2007,
4042 gnome-2008|GNOME Terminal snapshot 2.22.3,
4045 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
4046 # supply key information which is not built into the program. With 2.22.3,
4047 # this list is built into the program (which addresses the inadvertant use of
4048 # random terminfo data, though using a set of values which does not correspond
4049 # to any that xterm produces - still not solving the problem that GNOME
4050 # terminal hardcodes the $TERM variable as "xterm").
4052 # terminfo modifier code keys
4053 # kf13-kf24 shift 2 F1 to F12
4054 # kf25-kf36 control 5 F1 to F12
4055 # kf37-kf48 shift/control 6 F1 to F12
4056 # kf49-kf60 alt 3 F1 to F12
4057 # kf61-kf63 shift-alt 4 F1 to F3
4059 # The parameters with \EO (SS3) are technically an error, since SS3 should have
4060 # no parameters. This appears to be rote copying based on xterm+pcc0.
4061 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
4062 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
4063 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
4064 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
4065 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
4066 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
4067 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
4069 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
4072 vte|VTE aka GNOME Terminal,
4074 gnome|GNOME Terminal,
4077 # palette is hardcoded...
4078 vte-256color|VTE with xterm 256-colors,
4079 initc@, use=xterm+256color, use=vte,
4080 gnome-256color|GNOME Terminal with xterm 256-colors,
4083 # XFCE Terminal 0.2.5.4beta2
4085 # This is based on some of the same source code, e.g., the VTE library, as
4086 # gnome-terminal, but has fewer features, fails more screens in vttest.
4087 # Since most of the terminfo-related behavior is due to the VTE library,
4088 # the terminfo is the same as gnome-terminal.
4093 # Multi-Gnome-Terminal 1.6.2
4095 # This does not use VTE, and does have different behavior (compare xfce and
4097 mgt|Multi GNOME Terminal,
4098 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
4101 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
4102 # or not is debatable).
4105 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4108 # (formerly known as kvt)
4110 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
4111 # simplify this entry (and point out why konsole isn't xterm), we base this on
4112 # xterm-r6. The default keyboard appears to be 'linux'.
4115 # a) konsole implements several features from XFree86 xterm, though none of
4116 # that is documented - except of course in its source code - apparently
4117 # because its implementors are unaccustomed to reading documentation - as
4118 # evidenced by the sparse and poorly edited documentation distributed with
4119 # konsole. Some features such as the 1049 private mode are recognized but
4120 # incorrectly implemented as a duplicate of the 47 private mode.
4121 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4122 # sends PC-style escapes rather than vt100.
4123 # c) fails vttest menu 3 (Test of character sets) because it does not properly
4124 # parse some control sequences. Also fails vttest Primary Device Attributes
4125 # by sending a bogus code (in the source it says it's supposed to be a
4126 # vt220, which is doubly incorrect because it does not implement vt220
4127 # control sequences except for a few special cases). Treat it as a
4128 # mildly-broken vt102.
4130 # Update for konsole 1.3.2:
4131 # The 1049 private mode works (but see the other xterm screens in vttest).
4132 # Primary Device Attributes now returns the code for a vt100 with advanced
4133 # video option. Perhaps that's intended to be a "mildly-broken vt102".
4135 # Updated for konsole 1.6.4:
4136 # add konsole-solaris
4138 # Updated for konsole 1.6.6:
4139 # add control-key modifiers for function-keys, etc.
4141 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
4142 # different from xterm (and vt100's). They have the same behavior in this
4143 # detail, but it is unclear which copies the other.
4144 konsole-base|KDE console window,
4147 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4148 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4149 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
4150 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4151 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4152 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
4153 rmso=\E[27m, rmul=\E[24m,
4154 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4155 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4156 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
4157 use=ecma+color, use=xterm-r6,
4158 konsole-linux|KDE console window with linux keyboard,
4159 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
4160 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
4161 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
4162 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
4163 konsole-solaris|KDE console window with Solaris keyboard,
4164 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4165 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4166 # than testing the code.
4167 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4168 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4169 # The value for kbs reflects local customization rather than the settings used
4170 # for XFree86 xterm.
4171 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4172 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4174 # Konsole does not implement shifted cursor-keys.
4175 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4176 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4178 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4179 # it is still useful for deriving the other entries.
4180 konsole-vt100|KDE console window with vt100 (sic) keyboard,
4181 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4182 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4183 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4184 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4185 khome=\E[H, use=konsole-base,
4186 konsole-vt420pc|KDE console window with vt420 pc keyboard,
4187 kbs=^H, kdch1=\177, use=konsole-vt100,
4188 konsole-16color|klone of xterm-16color,
4189 ncv#32, use=ibm+16color, use=konsole,
4190 # make a default entry for konsole
4191 konsole|KDE console window,
4194 # palette is hardcoded...
4195 konsole-256color|KDE console window with xterm 256-colors,
4196 initc@, use=xterm+256color, use=konsole,
4199 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4201 # It is nominally a vt102 emulator, with features borrowed from rxvt and
4204 # The function keys are numbered based on shift/control/alt modifiers, except
4205 # that the control-modifier itself is used to spawn a new copy of mlterm (the
4206 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
4207 # how it is configured.
4209 # kf1 to kf12 \E[11~ to \E[24~
4210 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
4211 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
4212 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
4213 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
4214 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
4215 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
4216 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
4218 mlterm|multi lingual terminal emulator,
4219 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4220 colors#8, cols#80, it#8, lines#24, pairs#64,
4221 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4222 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4223 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4224 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4225 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4226 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4227 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4228 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4229 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4230 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4231 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4232 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4233 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4234 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4235 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4236 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4237 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4238 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4239 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
4240 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4241 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4242 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
4243 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4244 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
4245 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4247 # The insert/delete/home/end keys do not respond to modifiers because mlterm
4248 # looks in its termcap to decide which string to send. If it used terminfo
4249 # (when available), it could use the extended names introduced for xterm.
4250 mlterm+pcfkeys|fragment for PC-style fkeys,
4251 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
4252 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
4253 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
4254 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
4255 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
4256 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
4257 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
4258 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
4259 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
4261 mlterm-256color|mlterm 3.0 with xterm 256-colors,
4262 use=xterm+256color, use=rxvt,
4265 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
4266 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
4269 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
4270 # but some applications don't work with that.
4271 # It also has an AIX extension
4275 # but the latter does not work correctly.
4277 # The distributed terminfo says it implements hpa and vpa, but they are not
4278 # implemented correctly, using relative rather than absolute positioning.
4280 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
4281 # Since rxvt is not really compatible with xterm, it should be configured as
4282 # "rxvt" or "rxvt-color".
4284 # removed dch/dch1 because they are inconsistent with bce/ech -TD
4285 # remove km as per tack test -TD
4286 rxvt-basic|rxvt terminal base (X Window System),
4287 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
4288 cols#80, it#8, lines#24,
4289 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4290 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4291 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4292 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4293 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4294 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4295 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
4296 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
4297 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
4298 ind=^J, is1=\E[?47l\E=\E[?1l,
4299 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4300 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4301 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
4303 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4304 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4305 s0ds=\E(B, s1ds=\E(0, sc=\E7,
4306 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4307 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4308 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4309 use=rxvt+pcfkeys, use=vt220+keypad,
4310 # Key Codes from rxvt reference:
4312 # Note: Shift + F1-F10 generates F11-F20
4314 # For the keypad, use Shift to temporarily override Application-Keypad
4315 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4316 # is off, escape sequences toggle Application-Keypad setting.
4317 # Also note that values of Home, End, Delete may have been compiled
4318 # differently on your system.
4320 # Normal Shift Control Ctrl+Shift
4321 # Tab ^I ESC [ Z ^I ESC [ Z
4322 # BackSpace ^H ^? ^? ^?
4323 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
4324 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
4325 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4326 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
4327 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
4328 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
4329 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
4330 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
4331 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4332 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
4333 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
4334 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
4335 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
4336 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
4337 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
4338 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
4339 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
4340 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
4341 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
4342 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
4343 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
4344 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
4345 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
4346 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
4347 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
4348 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
4349 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
4350 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
4351 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
4354 # Up ESC [ A ESC [ a ESC O a ESC O A
4355 # Down ESC [ B ESC [ b ESC O b ESC O B
4356 # Right ESC [ C ESC [ c ESC O c ESC O C
4357 # Left ESC [ D ESC [ d ESC O d ESC O D
4358 # KP_Enter ^M ESC O M
4359 # KP_F1 ESC O P ESC O P
4360 # KP_F2 ESC O Q ESC O Q
4361 # KP_F3 ESC O R ESC O R
4362 # KP_F4 ESC O S ESC O S
4363 # XK_KP_Multiply * ESC O j
4364 # XK_KP_Add + ESC O k
4365 # XK_KP_Separator , ESC O l
4366 # XK_KP_Subtract - ESC O m
4367 # XK_KP_Decimal . ESC O n
4368 # XK_KP_Divide / ESC O o
4380 # The source-code for rxvt actually defines mappings for F21-F35, using
4381 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
4382 # are rare, so this entry uses the shift- and control-modifiers as in
4383 # xterm+pcfkeys to define keys past F12.
4385 # kIC is normally not used, since rxvt performs a paste for that (shifted
4386 # insert), unless private mode 35 is set.
4388 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
4389 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
4390 rxvt+pcfkeys|fragment for PC-style fkeys,
4391 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
4392 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
4393 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
4394 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4395 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4396 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4397 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4398 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4399 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4400 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4401 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4402 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4403 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4404 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4405 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
4406 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
4407 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
4408 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
4409 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
4410 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
4412 rxvt|rxvt terminal emulator (X Window System),
4414 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
4415 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
4416 rxvt-color|rxvt terminal emulator (X Window System),
4418 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
4419 use=xterm+256color, use=rxvt,
4420 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
4421 use=xterm+88color, use=rxvt,
4422 rxvt-xpm|rxvt terminal emulator (X Window System),
4424 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
4425 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4427 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
4428 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
4431 # This variant is supposed to work with rxvt 2.7.7 when compiled with
4432 # NO_BRIGHTCOLOR defined. rxvt needs more work...
4433 rxvt-16color|xterm with 16 colors like aixterm,
4434 ncv#32, use=ibm+16color, use=rxvt,
4439 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
4440 # makes its function-keys different from other flavors of rxvt -TD
4441 mrxvt|multitabbed rxvt,
4443 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
4444 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
4445 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
4446 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
4447 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
4448 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
4451 mrxvt-256color|multitabbed rxvt with 256 colors,
4452 use=xterm+256color, use=mrxvt,
4455 # From: Michael Jennings <mej@valinux.com>
4459 # removed kf0 which conflicts with kf10 -TD
4460 # remove cvvis which conflicts with cnorm -TD
4461 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
4462 # but does otherwise follow the rxvt+pcfkeys model -TD
4463 # remove nonworking flash -TD
4464 # remove km as per tack test -TD
4465 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
4466 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
4467 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
4468 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4469 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4470 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4471 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4472 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4473 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4474 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4475 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4476 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4477 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4478 is1=\E[?47l\E>\E[?1l,
4479 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
4480 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
4481 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
4482 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4483 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
4484 rmso=\E[27m, rmul=\E[24m,
4485 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4486 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4488 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4489 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4490 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4491 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4494 Eterm-256color|Eterm with xterm 256-colors,
4495 use=xterm+256color, use=Eterm,
4497 Eterm-88color|Eterm with 88 colors,
4498 use=xterm+88color, use=Eterm,
4501 # Based on rxvt 2.4.8, it has a few differences in key bindings
4502 aterm|AfterStep terminal,
4504 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4508 # This is not based on xterm's source...
4509 # vttest shows several problems with keyboard, cursor-movements.
4510 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
4511 xiterm|internationalized terminal emulator for X,
4513 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4517 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
4518 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
4519 # chars look like --esr)
4520 hpterm|X-hpterm|hp X11 terminal emulator,
4521 am, da, db, mir, xhp,
4522 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
4523 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
4524 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
4525 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
4526 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
4527 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4528 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4529 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4530 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4531 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
4532 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4533 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4534 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4535 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
4536 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4538 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4539 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4540 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4541 # HPUX 11 provides a color version.
4542 hpterm-color|HP X11 terminal emulator with color,
4546 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4547 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4550 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4551 # It corresponds to emu's internal emulation:
4553 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4554 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4555 # fixes: add civis, cnorm, sgr -TD
4556 emu|emu native mode,
4557 am, bce, mir, msgr, xon,
4558 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4559 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4560 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4561 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4562 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
4563 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4564 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4565 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4566 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4567 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4568 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4569 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4570 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4571 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4572 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4573 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4574 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4575 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4577 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4578 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4580 # vt220 Terminfo entry for the Emu emulation, corresponds to
4582 # with NumLock set (to make the keypad transmit kf0-kf9).
4583 # fixes: add am, xenl, corrected sgr0 -TD
4584 emu-220|Emu-220 (vt200-7bit mode),
4586 cols#80, it#8, lines#24, vt#200,
4587 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4588 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4589 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4590 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4591 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4592 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4593 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4594 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4595 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4596 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4597 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4598 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4599 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4600 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4601 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4602 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4603 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4604 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4605 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4606 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4607 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4608 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4609 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4610 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4613 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4614 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4615 # indicate that it emulates more than one terminal, but incompletely.
4617 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4618 # It is based on vt102's entry, with some subtle differences, but also
4620 # supports ANSI colors (except for 'op' string)
4621 # apparently implements alternate screen like xterm
4622 # does not use padding, of course.
4623 mvterm|vv100|SwitchTerm aka mvTERM,
4624 am, eslok, hs, km, mir, msgr, xenl,
4625 colors#8, cols#80, it#8, lines#24, pairs#64,
4626 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4627 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4628 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4629 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4630 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4631 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4632 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4633 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4634 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4635 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4636 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4637 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4638 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4640 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4641 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4642 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4643 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4644 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4645 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4649 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4651 # "mterm -type ansi" sets $TERM to "ansi"
4652 mterm-ansi|ANSI emulation,
4655 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4656 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4657 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4658 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4659 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4660 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4661 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4662 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4663 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4664 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4666 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4667 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4669 # mterm normally sets $TERM to "mterm"
4670 mterm|mouse-sun|Der Mouse term,
4673 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4674 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4675 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4676 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4677 # "mterm -type decansi" sets $TERM to "decansi"
4679 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4680 decansi|ANSI emulation with DEC compatibility hacks,
4681 am, mir, msgr, xenl,
4682 colors#8, it#8, pairs#64,
4683 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4684 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4685 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4686 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4687 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4688 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4689 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4690 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4691 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4692 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4693 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4694 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4695 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4696 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4697 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4698 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4699 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4700 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4701 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4702 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4703 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4704 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4705 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4706 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4707 u7=\E[6n, vpa=\E[%i%p1%dd,
4711 # vwmterm is a terminal emulator written for the VWM console window manager
4714 am, bce, ccc, mir, msgr, npc, xenl, xon,
4716 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4717 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4718 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
4719 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
4720 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
4721 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
4722 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
4723 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
4724 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
4725 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4726 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4727 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
4728 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
4729 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4730 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
4731 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
4732 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
4736 # MGR is a Bell Labs window system lighter-weight than X.
4737 # These entries describe MGR's xterm-equivalent.
4738 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4741 mgr|Bellcore MGR (non X) window system terminal emulation,
4743 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4744 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4745 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4746 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4747 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4748 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4749 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4750 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4751 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4753 mgr-sun|Mgr window with Sun keyboard,
4754 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4755 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4756 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4757 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4758 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4759 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4760 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4761 mgr-linux|Mgr window with Linux keyboard,
4762 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4763 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4764 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4765 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4766 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4772 # Note: the original terminfo description uses leading blank to persuade
4773 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
4776 # Reading the code shows it should work for aixterm 16-colors
4777 # - added st-16color
4780 # - set eo (erase-overstrike)
4782 # - tbc doesn't work
4784 # - cbt doesn't work
4785 # - shifted cursor-keys send sequences like rxvt
4786 # - sgr referred to unimplemented "invis" mode.
4787 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
4788 simpleterm|st| simpleterm,
4789 am, eo, mir, msgr, ul, xenl,
4790 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
4791 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4792 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4793 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4794 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4795 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4796 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
4797 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
4798 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
4799 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4800 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4801 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4802 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4803 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
4804 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
4805 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4806 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
4807 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
4808 st-16color|simpleterm with 16-colors,
4809 use=ibm+16color, use=simpleterm,
4810 # 256 colors "works", but when running xterm's test-scripts, some garbage is
4811 # shown in the titlebar.
4812 st-256color|simpleterm with 256 colors,
4814 initc@, use=xterm+256color, use=simpleterm,
4817 # http://software.jessies.org/terminator/
4818 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
4819 # Debian/current -TD (2011/8/20)
4821 # There are some packaging problems:
4822 # a) using Java, the program starts off using 50Mb, and climbs from there,
4823 # up to 114Mb after testing (no scrollback).
4824 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
4825 # (two copies, just in case the host happens to be Mac OS X).
4826 # I deleted this after testing with tack.
4828 # Issues/features found with tack:
4829 # a) tbc does not work (implying that hts also is broken).
4830 # Comparing with the tabs utility shows a problem with the last tabstop on
4832 # b) has xterm-style shifted function-key strings
4833 # meta also is used, but control is ignored.
4834 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
4835 # d) some combinations of shift/control send xterm-style sequences for
4836 # insert/delete/home/end.
4837 # e) numeric keypad sends only numbers (compare with vttest).
4838 # f) meta mode (km) is not implemented.
4840 # Issues found with ncurses test-program:
4841 # a) bce is inconsistently implemented
4842 # b) widths of Unicode values above 256 do not always agree with wcwidth.
4844 # Checked with vttest, found low degree of compatibility there.
4846 # Checked with xterm's scripts, found that the 256-color palette is fixed.
4850 # b) corrected sgr0 to reset alternate character set
4851 # c) modified smacs/rmacs to use SCS rather than SI/SO
4854 terminator|Terminator no line wrap,
4855 eo, mir, msgr, xenl, xon,
4856 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
4857 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4858 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4859 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4860 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
4861 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4862 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4863 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K,
4864 el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H,
4865 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
4866 ind=^J, is1=\E[?47l\E=\E[?1l,
4867 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4868 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4869 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4870 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4871 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4872 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4873 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4874 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
4875 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
4876 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4877 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
4878 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
4879 setaf=\E[38;5;%p1%dm,
4880 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;,
4881 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
4882 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1,
4885 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4888 # Columbus UNIX virtual terminal. This terminal also appears in
4889 # UNIX 4.0 and successors as line discipline 1 (?), but is
4890 # undocumented and does not really work quite right.
4891 cbunix|cb unix virtual terminal,
4893 cols#80, lines#24, lm#0,
4894 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4895 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4896 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4897 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4898 smso=\Ea^D, smul=\Ea^A,
4899 # (vremote: removed obsolete ":nl@:" -- esr)
4900 vremote|virtual remote terminal,
4902 cols#79, use=cbunix,
4904 pty|4bsd pseudo teletype,
4905 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4906 smso=\Ea$, smul=\Ea!, use=cbunix,
4908 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4909 eterm|gnu emacs term.el terminal emulation,
4912 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4913 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4914 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4915 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4916 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4917 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4918 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4919 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4920 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4923 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
4924 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
4925 am, mir, msgr, xenl,
4926 colors#8, cols#80, lines#24, pairs#64,
4927 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4928 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4929 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4930 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4931 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4932 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4933 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
4934 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4935 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
4936 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
4937 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4938 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
4939 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
4940 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4941 u6=\E[%i%d;%dR, u7=\E[6n,
4943 # Entries for use by the `screen' program by Juergen Weigert,
4944 # Michael Schroeder, Oliver Laumann. The screen and
4945 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4946 # come from University of Wisconsin and may be older.
4947 # (screen: added <cnorm> on ANSI model -- esr)
4949 # 'screen' defines extensions to termcap. Some are used in its terminal
4951 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4952 # AX (bool) Does understand ANSI set default fg/bg color
4953 # (\E[39m / \E[49m).
4954 # S0 (str) Switch charset 'G0' to the specified charset.
4955 # E0 (str) Switch charset 'G0' back to standard charset.
4957 # tested with screen 3.09.08
4958 screen|VT 100/ANSI X3.64 virtual terminal,
4959 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4960 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
4961 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4962 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4963 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4964 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4965 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4966 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4967 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4968 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4969 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4970 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4971 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4972 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4973 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4974 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4975 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4976 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4977 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4978 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4979 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4980 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4981 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4982 S0=\E(%p1%c, use=ecma+color,
4983 # The bce and status-line entries are from screen 3.9.13 (and require some
4984 # changes to .screenrc).
4985 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4988 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4989 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4991 # ======================================================================
4992 # Entries for GNU Screen with 16 colors.
4993 # Those variations permit to benefit from 16 colors palette, and from
4994 # bold font and blink attribute separated from bright colors. But they
4995 # are less portable than the generic "screen" 8 color entries: Their
4996 # usage makes real sense only if the terminals you attach and reattach
4997 # do all support 16 color palette.
4999 screen-16color|GNU Screen with 16 colors,
5000 use=ibm+16color, use=screen,
5002 screen-16color-s|GNU Screen with 16 colors and status line,
5003 use=ibm+16color, use=screen-s,
5005 screen-16color-bce|GNU Screen with 16 colors and BCE,
5006 use=ibm+16color, use=screen-bce,
5008 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
5009 bce, use=ibm+16color, use=screen-s,
5011 # ======================================================================
5012 # Entries for GNU Screen 4.02 with --enable-colors256.
5014 screen-256color|GNU Screen with 256 colors,
5016 initc@, use=xterm+256color, use=screen,
5018 screen-256color-s|GNU Screen with 256 colors and status line,
5020 initc@, use=xterm+256color, use=screen-s,
5022 screen-256color-bce|GNU Screen with 256 colors and BCE,
5024 initc@, use=xterm+256color, use=screen-bce,
5026 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
5028 initc@, use=xterm+256color, use=screen-s,
5030 # ======================================================================
5032 # Read the fine manpage:
5033 # When screen tries to figure out a terminal name for
5034 # itself, it first looks for an entry named "screen.<term>",
5035 # where <term> is the contents of your $TERM variable. If
5036 # no such entry exists, screen tries "screen" (or "screen-w"
5037 # if the terminal is wide (132 cols or more)). If even this
5038 # entry cannot be found, "vt100" is used as a substitute.
5040 # Notwithstanding the manpage, screen uses its own notion of the termcap
5041 # and some keys from "screen.<term>" are ignored. Here is an entry which
5042 # covers those (tested with screen 4.00.02) -TD
5043 screen+fkeys|function-keys according to screen,
5044 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
5047 # Here are a few customized entries which are useful -TD
5050 # (a) screen does not support invis.
5051 # (b) screen's implementation of bw is incorrect according to tack.
5052 # (c) screen appears to hardcode the strings for khome/kend, making it
5053 # necessary to override the "use=" clause's values (screen+fkeys).
5054 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
5055 # which is NOT the same as the terminfo screen.<term>.
5056 # (e) when screen finds one of these customized entries, it sets $TERM to
5057 # match. Hence, no "screen.xterm" entry is provided, since that would
5058 # create heartburn for people running remote xterm's.
5060 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
5061 # since the default translations override the built-in keycode
5062 # translation. They are suppressed here to show what is tested by tack.
5063 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
5065 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
5066 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
5067 E3@, use=screen+fkeys, use=xterm-new,
5068 # xterm-r6 does not really support khome/kend unless it is propped up by
5069 # the translations resource.
5070 screen.xterm-r6|screen customized for X11R6 xterm,
5071 bw, use=screen+fkeys, use=xterm-r6,
5072 # Color applications running in screen and TeraTerm do not play well together
5073 # on Solaris because Sun's curses implementation gets confused.
5074 screen.teraterm|disable ncv in teraterm,
5076 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5077 use=screen+fkeys, use=screen,
5079 screen.rxvt|screen in rxvt,
5081 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5082 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
5083 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
5084 screen.Eterm|screen in Eterm,
5085 use=screen+fkeys, use=Eterm,
5086 screen.mrxvt|screen in mrxvt,
5087 use=screen+fkeys, use=mrxvt,
5088 screen.vte|screen in any VTE-based terminal,
5089 use=screen+fkeys, use=vte,
5090 screen.gnome|screen in GNOME Terminal,
5091 use=screen+fkeys, use=gnome,
5092 screen.konsole|screen in KDE console window,
5093 use=screen+fkeys, use=konsole,
5094 # fix the backspace key
5095 screen.linux|screen in linux console,
5097 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
5098 screen.mlterm|screen in mlterm,
5099 use=screen+fkeys, use=mlterm,
5101 # The default "screen" entry is reasonably portable, but not optimal for the
5102 # most widely-used terminal emulators. The "bce" capability is supported in
5103 # screen since 3.9.13, and when used, will require fewer characters to be sent
5104 # to the terminal for updates.
5106 # If you are using only terminals which support bce, then you can use this
5107 # feature in your screen configuration.
5109 # Adding these lines to your ".screenrc" file will allow using these customized
5114 screen-bce.xterm-new|screen optimized for modern xterm,
5116 ech@, use=screen.xterm-new,
5117 screen-bce.rxvt|screen optimized for rxvt,
5119 ech@, use=screen.rxvt,
5120 screen-bce.Eterm|screen optimized for Eterm,
5122 ech@, use=screen.Eterm,
5123 screen-bce.mrxvt|screen optimized for mrxvt,
5125 ech@, use=screen.mrxvt,
5126 screen-bce.gnome|screen optimized for GNOME-Terminal,
5128 ech@, use=screen.gnome,
5129 screen-bce.konsole|screen optimized for KDE console window,
5131 ech@, use=screen.konsole,
5132 screen-bce.linux|screen optimized for linux console,
5134 ech@, use=screen.linux,
5135 screen-bce.mlterm|screen optimized for mlterm,
5137 ech@, use=screen.mlterm,
5139 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5140 cols#132, use=screen,
5142 screen2|old VT 100/ANSI X3.64 virtual terminal,
5143 cols#80, it#8, lines#24,
5144 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
5145 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5146 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5147 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5148 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
5149 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5150 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
5151 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
5152 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
5153 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
5154 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
5155 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
5156 screen3|older VT 100/ANSI X3.64 virtual terminal,
5158 cols#80, it#8, lines#24,
5159 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5160 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5161 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5162 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5163 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5164 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5165 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
5166 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
5167 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
5168 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
5169 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
5170 smul=\E[4m, tbc=\E[3g,
5172 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
5173 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
5174 # been maintained until recently by the National Center for Supercomputer
5175 # Applications, and it is feature rich, stable and free. It can be downloaded
5176 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
5177 # xterm+sl, and the docs at NCSA. It works well.
5179 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
5180 # The terminal options should be set as follows:
5181 # Xterm sequences ON
5182 # use VT wrap mode ON
5183 # use Emacs arrow keys OFF
5184 # CTRL-COMND is Emacs meta ON
5186 # answerback string: "ncsa-vt220-8"
5187 # setup keys: all disabled
5189 # Application mode is not used.
5191 # Other special mappings:
5198 # PAGEDOWN Next Screen
5200 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
5203 # The status-line manipulation is a mapping of the xterm-compatible control
5204 # sequences for setting the window-title. So you must use tsl and fsl in
5205 # pairs, since the latter ends the string that is loaded to the window-title.
5206 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5207 am, km, mir, msgr, xenl,
5208 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5209 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5210 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5211 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5212 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5213 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5214 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5215 el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
5216 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5217 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5219 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
5220 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5221 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
5222 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
5223 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
5224 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
5225 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
5226 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
5227 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
5228 rmso=\E[27m, rmul=\E[24m,
5229 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
5230 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5231 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
5232 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5233 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
5234 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5235 use=ncsa-m, use=klone+color,
5236 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5238 dsl@, fsl@, tsl@, use=ncsa,
5239 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5241 dsl@, fsl@, tsl@, use=ncsa-m,
5243 # The documented function-key mapping refers to the Apple Extended Keyboard
5244 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
5245 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
5246 # some keyboards and many applications require these as F1-F4.
5248 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
5249 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5250 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5251 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
5252 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
5253 kf8=\E[19~, kf9=\E[20~, use=ncsa,
5255 #### Pilot Pro Palm-Top
5257 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
5258 # http://www.ai/~iang/TGssh/
5259 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
5262 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
5263 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
5264 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
5267 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
5268 # These entries are for the Embeddable Linux Kernel System (ELKS)
5269 # project - an heavily stripped down Linux to be run on 16 bit
5270 # boxes or, eventually, to be used in embedded systems - and have been
5271 # adapted from the stock ELKS termcap. The project itself looks stalled,
5272 # and the latest improvements I know of date back to March 2000.
5274 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
5275 # as an added bonus, this deals with all the capabilities common to
5276 # both VT52 and ANSI (or, eventually, "special") modes.
5278 elks-glasstty|ELKS glass-TTY capabilities,
5280 cols#80, it#8, lines#25,
5281 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
5284 elks-vt52|ELKS vt52 console,
5285 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
5286 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
5287 home=\EH, use=elks-glasstty,
5289 elks-ansi|ELKS ANSI console,
5290 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5291 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5292 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
5294 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
5295 # instead of VT52, but the "elks" entry still refers to the latter.
5297 elks|default ELKS console,
5300 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
5301 # one but in screen size
5303 sibo|ELKS SIBO console,
5304 cols#61, it#8, lines#20, use=elks-vt52,
5306 ######## COMMERCIAL WORKSTATION CONSOLES
5312 # This is from the OSF/1 Release 1.0 termcap file
5313 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
5316 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5317 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
5318 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
5319 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
5320 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5325 # :is1: resets scrolling region in case a previous user had used "tset vt100"
5326 oldsun|Sun Microsystems Workstation console,
5327 OTbs, am, km, mir, msgr,
5328 cols#80, it#8, lines#34,
5329 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
5330 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5331 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5332 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5333 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5334 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
5335 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5336 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
5337 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
5338 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
5339 sun-il|Sun Microsystems console with working insert-line,
5342 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5343 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5344 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5345 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5346 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5347 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
5348 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
5349 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
5350 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
5351 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
5352 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
5353 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
5354 smso=\E[7m, u8=\E[1t, u9=\E[11t,
5355 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
5356 # flake out on the last line. Unfortunately, without them the terminal has no
5358 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
5359 il@, il1@, use=sun-il,
5360 # If you are using an SS5, change the sun definition to use sun-ss5.
5361 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
5364 sun+sl|Sun Workstation window status line,
5366 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
5368 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
5369 sun-s|Sun Microsystems Workstation window with status line,
5371 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
5372 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
5374 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
5375 sun-48|Sun 48-line window,
5376 cols#80, lines#48, use=sun,
5377 sun-34|Sun 34-line window,
5378 cols#80, lines#34, use=sun,
5379 sun-24|Sun 24-line window,
5380 cols#80, lines#24, use=sun,
5381 sun-17|Sun 17-line window,
5382 cols#80, lines#17, use=sun,
5383 sun-12|Sun 12-line window,
5384 cols#80, lines#12, use=sun,
5385 sun-1|Sun 1-line window for sysline,
5388 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
5389 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
5390 ich1@, rmir@, smir@, use=sun,
5391 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
5393 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
5394 sun-type4|Sun Workstation console with type 4 keyboard,
5395 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
5396 kcuu1=\E[215z, use=sun-il,
5398 # Most of the current references to sun-color are from users wondering why this
5399 # is the default on install. Details from reading the wscons manpage, adding
5400 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
5401 # when those were added -TD (2005-05-28)
5403 # According to wscons manpage, color is supported only on IA systems.
5404 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
5405 # does not list these. It also sets ncv#3, however that corresponds to
5406 # underline and standout.
5408 # Since the documentation and terminfo do not agree, see also current code at
5409 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
5411 # That (actually a different driver which "supports" sun-color) also supports
5418 # It supports bold, but not underline -TD (2009-09-19)
5419 sun-color|Sun Microsystems Workstation console with color support (IA systems),
5420 colors#8, ncv#3, pairs#64,
5421 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
5422 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
5423 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5424 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5425 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5426 sgr=\E[0%?%p1;1%;%?%p3%;7%;m, sgr0=\E[m, smso=\E[1m,
5432 # (wsiris: this had extension capabilities
5433 # :HS=\E7F2:HE=\E7F7:\
5434 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
5435 # See the note on Iris extensions near the end of this file.
5436 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
5437 # <flash> from BRL -- esr)
5438 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
5439 OTbs, OTnc, OTpt, am,
5440 OTkn#3, cols#80, it#8, lines#40,
5441 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
5442 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
5443 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
5444 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
5445 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
5446 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
5447 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
5448 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
5453 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
5454 # environment). Note: these have nothing to do with Sony's News workstation
5458 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
5459 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
5460 psterm|psterm-basic|NeWS psterm-80x34,
5461 OTbs, am, hs, km, ul,
5462 cols#80, it#8, lines#34,
5463 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
5464 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
5465 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
5466 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
5467 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
5468 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
5469 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
5471 psterm-96x48|NeWS psterm 96x48,
5472 cols#96, lines#48, use=psterm,
5473 psterm-90x28|NeWS psterm 90x28,
5474 cols#90, lines#28, use=psterm,
5475 psterm-80x24|NeWS psterm 80x24,
5476 cols#80, lines#24, use=psterm,
5477 # This is a faster termcap for psterm. Warning: if you use this termcap,
5478 # some control characters you type will do strange things to the screen.
5479 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
5480 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
5481 OTbs, am, hs, km, ul,
5482 cols#80, it#8, lines#34,
5483 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
5484 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
5485 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
5486 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5487 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
5488 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
5489 smso=^Oo, smul=^Ou, tsl=^Ol,
5493 # Use `glasstty' for the Workspace application
5496 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
5499 cols#80, it#8, lines#24,
5500 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5501 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5502 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5503 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
5504 nextshell|NeXT Shell application,
5507 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
5510 #### Sony NEWS workstations
5513 # (news-unk: this had :KB=news: -- esr)
5514 news-unk|SONY NEWS vt100 emulator common entry,
5515 OTbs, OTpt, am, xenl,
5517 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
5518 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5519 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
5520 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5521 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5522 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
5523 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
5524 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
5525 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
5526 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5527 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
5528 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5530 # (news-29: this had :TY=ascii: --esr)
5532 lines#29, use=news-unk,
5533 # (news-29-euc: this had :TY=euc: --esr)
5536 # (news-29-sjis: this had :TY=sjis: --esr)
5540 # (news-33: this had :TY=ascii: --esr)
5542 lines#33, use=news-unk,
5543 # (news-33-euc: this had :TY=euc: --esr)
5546 # (news-33-sjis: this had :TY=sjis: --esr)
5550 # (news-42: this had :TY=ascii: --esr)
5552 lines#42, use=news-unk,
5553 # (news-42-euc: this had :TY=euc: --esr)
5556 # (news-42-sjis: this had :TY=sjis: --esr)
5560 # NEWS-OS old termcap entry
5562 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
5563 news-old-unk|SONY NEWS vt100 emulator common entry,
5564 OTbs, OTpt, am, xenl,
5566 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
5567 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5568 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5569 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
5570 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
5571 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
5572 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5573 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5574 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5576 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
5577 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
5580 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5583 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
5584 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
5586 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
5589 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
5590 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
5593 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5596 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
5597 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
5600 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5603 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
5604 # also the alias vt100-bm.
5605 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
5608 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
5611 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
5612 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
5615 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5618 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
5619 news28|sony vt100 emulator 28 lines,
5622 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
5625 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
5626 news29|news28-a|sony vt100 emulator 29 lines,
5628 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
5631 # (news511: this had :TY=sjis: --esr)
5632 nwp511|nwp-511|nwp-511 vt100,
5633 OTbs, OTpt, am, xenl,
5635 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5636 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
5637 ed=\E[J$<30/>, el=\E[K$<3/>,
5638 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
5639 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
5640 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
5641 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
5642 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5643 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
5644 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5645 # (news517: this had :TY=sjis:. --esr)
5646 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
5649 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5650 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
5651 tsl=\E[1$}\E[;%df, use=vt200,
5652 # (news517-w: this had :TY=sjis:. --esr)
5653 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
5656 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5657 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5658 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5659 tsl=\E[1$}\E[;%df, use=vt200,
5661 #### Common Desktop Environment
5664 # This ships with Sun's CDE in Solaris 2.5
5665 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
5666 dtterm|CDE desktop terminal,
5667 am, mir, msgr, xenl, xon,
5668 cols#80, it#8, lines#24, lm#0, ncv@,
5669 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5670 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5671 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5672 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5673 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5674 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5675 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5676 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5677 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
5678 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5679 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
5680 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5681 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5682 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5683 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5684 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
5685 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5686 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5687 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5688 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
5690 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5691 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
5692 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5694 #### Non-Unix Consoles
5697 #### EMX termcap.dat compatibility modes
5699 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
5700 # no_color_video to inform the application that standout(1), underline(2)
5701 # reverse(4) and invisible(64) don't work with color.
5702 emx-base|DOS special keys,
5705 bel=^G, use=ansi.sys,
5707 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
5708 # a Unix-style environment used on OS/2. (Note that the suffix makes some
5709 # names longer than 14 characters, the nominal maximum).
5711 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
5712 ansi-emx|ANSI.SYS color,
5713 am, bce, eo, mir, msgr, xon,
5714 colors#8, cols#80, it#8, lines#25, pairs#64,
5715 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5716 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
5717 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5718 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5719 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5720 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5721 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5722 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5723 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5724 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5725 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5726 u9=\E[c, use=emx-base,
5727 # nice colors for Emacs (white on blue, mode line white on cyan)
5728 ansi-color-2-emx|ANSI.SYS color 2,
5729 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5730 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5731 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5732 smul=\E[1;36;44m, use=ansi-emx,
5733 # nice colors for Emacs (white on black, mode line black on cyan)
5734 ansi-color-3-emx|ANSI.SYS color 3,
5735 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5736 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5737 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5738 smul=\E[0;36;40m, use=ansi-emx,
5739 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5741 cols#80, it#8, lines#24,
5742 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5743 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5744 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5745 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5746 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5747 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5750 # Use this for cygwin32 (tested with beta 19.1)
5751 # underline is colored bright magenta
5752 # shifted kf1-kf12 are kf11-kf22
5753 cygwinB19|ansi emulation for cygwin32,
5754 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5755 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5756 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5757 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5758 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5759 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5760 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5763 # Use this for cygwin (tested with version 1.1.0).
5764 # I've combined pcansi and linux. Some values of course were different and
5765 # I've indicated which of these were and which I used.
5766 # Cheers, earnie_boyd@yahoo.com
5767 # several changes based on running with tack and comparing with older entry -TD
5768 # more changes from csw:
5770 # remove eo [erase overstrike with blank]
5771 # change clear was \E[H\E[J now \E[2J (faster?)
5774 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5776 # add cub [cursor back param]
5777 # add cuf [cursor forward param]
5778 # add cuu [cursor up param]
5779 # add cud [cursor down param]
5780 # add hs [has status line]
5781 # add fsl [return from status line]
5782 # add tsl [go to status line]
5783 # add smacs [Start alt charset] (not sure if this works)
5784 # add rmacs [End alt charset] (ditto)
5785 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5786 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5787 # add kb2 [center of keypad]
5788 # add u8 [user string 8] \E[?6c
5789 # add el [clear to end of line] \E[K
5791 # cnorm [make cursor normal] not implemented
5792 # flash [flash] not implemented
5793 # blink [blink] not implemented very usefully in cygwin? \E[5m
5794 # dim [dim] not implemented very usefully in cygwin? \E[2m
5795 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5796 # kNXT [shifted next key] not implemented
5797 # kPRV [shifted prev key] not implemented
5798 # khome [home key] really is \E[1~ NOT \E[H
5799 # tbc [clear tab stops] not implemented
5800 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5801 # smpch [Start PC charset] is \E[11m, same as smacs
5802 # rmpch [End PC charset] is \E[10m, same as rmacs
5803 # mir [move in insert mode] fails in tack?
5804 # bce [back color erase] causes problems with change background color?
5805 # cvvis [make cursor very visible] causes a stackdump when testing with
5806 # testcurs using the output option? \E[?25h\E[?8c
5807 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5808 # ech [erase characters param] broken \E[%p1%dX
5809 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5812 # Remove cbt since it does not work in current cygwin
5813 # Add 'mir' and 'in' flags based on tack
5814 cygwin|ansi emulation for Cygwin,
5815 am, hs, mir, msgr, xon,
5816 colors#8, it#8, pairs#64,
5817 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5818 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5819 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5820 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5821 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5822 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5823 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5824 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5825 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5826 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5827 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5828 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5829 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5830 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5831 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5832 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5833 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5834 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5835 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5836 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5837 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5838 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5839 vpa=\E[%i%p1%dd, use=vt102+enq,
5841 # I've supplied this so that you can help test new values and add other
5842 # features. Cheers, earnie_boyd@yahoo.com.
5844 # Some features are from pcansi. The op value is from linux. Function-keys
5845 # are from linux. These have been tested not to cause problems. xenl was in
5846 # this list, but DOES cause problems so it has been removed
5847 cygwinDBG|Debug Version for Cygwin,
5848 am, eo, mir, msgr, xon,
5849 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5850 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5851 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5852 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5853 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5854 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5855 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5856 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5857 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5858 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5859 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5860 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5861 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5862 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5863 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5864 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5865 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5866 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5867 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5868 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5869 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5870 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5871 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5872 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5873 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
5876 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5877 # encodings used by other x86 environments. All others are invented for DJGPP.
5878 # Oddly enough, while several combinations of modifiers are tabulated, there is
5879 # none for shifted cursor keys.
5931 # Ctrl-Delete \E[43~
5932 # Ctrl-Down Arrow \E[38~
5935 # Ctrl-Insert \E[42~
5936 # Ctrl-Left Arrow \E[39~
5937 # Ctrl-Page Down \E[46~
5938 # Ctrl-Page Up \E[45~
5939 # Ctrl-Right Arrow \E[40~
5940 # Ctrl-Up Arrow \E[37~
5956 # Alt-Down Arrow \E[60~
5960 # Alt-Left Arrow \E[61~
5961 # Alt-Page Down \E[68~
5962 # Alt-Page Up \E[67~
5963 # Alt-Right Arrow \E[62~
5964 # Alt-Up Arrow \E[59~
5993 djgpp|ansi emulation for DJGPP alpha,
5994 am, bce, msgr, xhp, xon, xt,
5995 colors#8, it#8, pairs#64,
5996 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5997 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5998 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5999 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6000 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6001 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6002 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6003 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6004 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6005 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
6006 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6007 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
6008 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6009 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6010 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
6011 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
6012 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6013 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
6014 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
6016 djgpp203|Entry for DJGPP 2.03,
6018 cols#80, it#8, lines#25,
6019 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
6022 djgpp204|Entry for DJGPP 2.04,
6024 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
6025 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6026 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
6027 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6028 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6029 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
6030 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
6031 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6032 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
6033 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6034 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
6035 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6036 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6037 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
6038 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
6039 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6041 # This is tested using U/Win's telnet. Scrolling is omitted because it is
6042 # buggy. Another odd bug appears when displaying "~" in alternate character
6043 # set (the emulator spits out error messages). Compare with att6386 -TD
6044 uwin|U/Win 3.2 console,
6045 am, eo, in, msgr, xenl, xon,
6046 colors#8, it#8, ncv#58, pairs#64,
6047 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6048 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6049 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
6050 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6051 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
6052 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
6053 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6054 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
6055 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
6056 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
6057 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
6058 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
6059 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6060 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
6061 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
6062 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
6064 # This entry fits the Windows NT console when the _POSIX_TERM environment
6065 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
6066 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
6067 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
6068 # systems is not, and (surprise!) they match very well.
6070 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
6071 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
6072 # are the installation instructions a pile of mind-numbing bureaucratese,
6073 # but the termcap entry is actually broken and unusable as given; the :do:
6074 # capability is misspelled "d".
6076 # To use this, you need to a bunch of environment variables:
6078 # SET _POSIX_TERM=on
6080 # SET TERMCAP=location of termcap file in POSIX file format
6081 # which is case-sensitive.
6082 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
6085 # Important note: setting the TMP environment variable in POSIX style renders
6086 # it incompatible with a lot of other applications, including Visual C++. So
6087 # you should have a separate command window just for vi. All the other
6088 # variables may be permanently set in the Control Panel\System applet.
6090 # You can find out more about the restrictions of this facility at
6091 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
6093 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
6094 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
6096 cols#80, it#8, lines#25,
6097 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6098 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6099 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
6100 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
6101 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
6102 # From: jew@venus.sunquest.com
6103 # Date: 19 Feb 93 23:41:07 GMT
6104 # Here's a combination of ansi and vt100 termcap
6105 # entries that works nearly perfectly for me
6106 # (Gateway 2000 Handbook and Microsoft Works 3.0):
6107 pcmw|PC running Microsoft Works,
6109 cols#80, it#8, lines#24, vt#3,
6110 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
6111 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
6112 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
6113 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
6114 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
6115 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6116 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
6117 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
6118 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6119 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6120 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6123 # From: Federico Bianchi
6124 # This is the entry for the OpenNT terminal.
6125 # The ntconsole name is for backward compatability.
6126 # This is for OpenNT 2.0 and later.
6127 # Later OpenNT was renamed to Interix.
6129 # Presently it is distributed by Microsoft as Services For Unix (SFU).
6130 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
6131 # the documentation dates from 1.9.9e) -TD
6133 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
6135 colors#8, cols#80, lines#25, ncv#3, pairs#64,
6136 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6137 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
6138 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
6139 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6140 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6141 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6142 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6143 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
6144 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
6145 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
6146 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
6147 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
6148 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
6149 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
6150 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
6151 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
6152 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
6153 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
6154 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
6155 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
6156 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
6157 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
6158 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
6159 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
6160 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6161 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
6162 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
6164 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
6165 lines#35, use=opennt,
6167 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
6168 lines#50, use=opennt,
6170 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
6171 lines#60, use=opennt,
6173 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
6174 lines#100, use=opennt,
6176 # OpenNT wide terminals
6177 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
6178 cols#125, use=opennt,
6180 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
6181 lines#35, use=opennt-w,
6183 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
6184 lines#50, use=opennt-w,
6186 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
6187 lines#60, use=opennt-w,
6189 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
6190 cols#132, use=opennt,
6192 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
6193 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
6194 rmcup@, smcup@, use=opennt,
6196 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
6197 lines#35, use=opennt-nti,
6199 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
6200 lines#50, use=opennt-nti,
6202 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
6203 lines#60, use=opennt-nti,
6205 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
6206 lines#100, use=opennt-nti,
6208 ######## COMMON TERMINAL TYPES
6210 # This section describes terminal classes and maker brands that are still
6211 # quite common, but have proprietary command sets not blessed by ANSI.
6216 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
6217 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
6218 # Acer has a web site at http://www.acer.com.
6220 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
6221 # His comments suggest they were shipped with the system.
6224 # (altos2: had extension capabilities
6225 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6226 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6227 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6228 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6229 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6230 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
6231 # :HL=^AP\r:SP=\E[i:\
6232 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
6233 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
6234 # Comparison with the k* capabilities makes it obvious that the c* things are
6235 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
6236 # :sr: was given as a boolean-- esr)
6237 altos2|alt2|altos-2|altos II,
6238 cols#80, it#8, lines#24, xmc#0,
6239 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
6240 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
6241 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
6242 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
6243 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
6244 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
6245 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
6246 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6247 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6248 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6249 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6250 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
6251 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
6252 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
6253 # (altos3: had extension capabilities
6254 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6255 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6256 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6257 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6258 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6259 # :HL=^AP\r:SP=\E[i:\
6260 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
6261 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
6262 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
6263 altos4|alt4|altos-4|altos IV,
6265 # (altos7: had extension capabilities:
6266 # :GG#0:GI=\EH8:GF=\EH7:\
6267 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6268 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6269 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6270 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6271 # Comparison with the k* capabilities makes it obvious that the c* things are
6272 # shift keys. I have renamed them to keys 32 and up accordingly. I have
6273 # also made this entry relative to adm12 in order to give it an <sgr>. The
6274 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
6275 altos7|alt7|altos VII,
6277 cols#80, lines#24, xmc#0,
6278 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
6279 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6280 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6281 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
6283 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
6284 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
6285 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
6286 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6287 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6288 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6289 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6290 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
6291 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
6292 rmir=\Er, smir=\Eq, use=adm+sgr,
6293 altos7pc|alt7pc|altos PC VII,
6294 kend=\ET, use=altos7,
6296 #### Hewlett-Packard (hp)
6299 # 8000 Foothills Blvd
6300 # Roseville, CA 95747
6301 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
6302 # 1-(800)-633-3600 (General customer support)
6305 # As of March 1998, HP no longer has any terminals in production.
6306 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
6307 # supported (they still have parts). So are the 2392a and 2394a.
6308 # See the WORKSTATION CONSOLES section for the 700s.
6311 # Generic HP terminal - this should (hopefully) work on any HP terminal.
6312 hpgeneric|hp|hewlett-packard generic terminal,
6313 OTbs, OTpt, am, da, db, mir, xhp,
6314 cols#80, lines#24, lm#0, vt#6,
6315 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6316 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
6317 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
6318 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
6319 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6322 hp110|hewlett-packard model 110 portable,
6323 lines#16, use=hpgeneric,
6325 hp+pfk+cr|hp function keys with CR,
6326 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
6327 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
6329 hp+pfk-cr|hp function keys w/o CR,
6330 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
6333 # The hp2621s use the same keys for the arrows and function keys,
6334 # but not separate escape sequences. These definitions allow the
6335 # user to use those keys as arrow keys rather than as function
6337 hp+pfk+arrows|hp alternate arrow definitions,
6338 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
6339 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
6340 kll=\Eq\r, kri=\Es\r,
6342 hp+arrows|hp arrow definitions,
6343 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6344 kind=\ES, kll=\EF, kri=\ET,
6346 # Generic stuff from the HP 262x series
6348 hp262x|HP 262x terminals,
6350 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
6351 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6352 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6353 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
6354 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6355 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
6356 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
6358 # Note: no <home> on HPs since that homes to top of memory, not screen.
6359 # Due to severe 2621 braindamage, the only way to get the arrow keys to
6360 # transmit anything at all is to turn on the function key labels
6361 # with <smkx>, and even then the user has to hold down shift!
6362 # The default 2621 turns off the labels except when it has to to
6363 # enable the function keys. If your installation prefers labels
6364 # on all the time, or off all the time (at the "expense" of the
6365 # function keys), use 2621-nl or 2621-wl.
6367 # Note: there are newer ROMs for 2621's that allow you to set
6368 # strap A so the regular arrow keys xmit \EA, etc, as with the
6369 # 2645. However, even with this strap set, the terminal stops
6370 # xmitting if you reset it, until you unset and reset the strap!
6371 # Since there is no way to set/unset the strap with an escape
6372 # sequence, we don't use it in the default.
6373 # If you like, you can use 2621-ba (brain-damaged arrow keys).
6374 hp2621-ba|2621 w/new rom and strap A set,
6375 rmkx@, smkx@, use=hp+arrows, use=hp2621,
6377 # hp2621 with function labels. Most of the time they are off,
6378 # but inside vi, the function key labels appear. You have to
6379 # hold down shift to get them to xmit.
6380 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
6381 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
6385 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
6386 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
6387 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
6388 use=hp+pfk+cr, use=hpgeneric,
6390 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
6391 hp2621p|hp 2621 with printer,
6392 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
6394 hp2621p-a|hp2621p with fn as arrows,
6395 use=hp+pfk+arrows, use=hp2621p,
6397 # hp2621 with k45 keyboard
6398 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
6399 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
6400 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
6402 # 2621 using all 48 lines of memory, only 24 visible at any time.
6403 hp2621-48|48 line 2621,
6405 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
6408 # 2621 with no labels ever. Also prevents vi delays on escape.
6409 hp2621-nl|hp 2621 with no labels,
6410 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
6413 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
6416 hp2621-nt|hp 2621 w/no tabs,
6419 # Hp 2624 B with 4 or 10 pages of memory.
6421 # Some assumptions are made with this entry. These settings are
6422 # NOT set up by the initialization strings.
6424 # Port Configuration
6429 # Terminal Configuration
6435 # Note: the 2624 DOES have a true <home>, believe it or not!
6437 # The 2624 has an "error line" to which messages can be sent.
6438 # This is CLOSE to what is expected for a "status line". However,
6439 # after a message is sent to the "error line", the next carriage
6440 # return is EATEN and the "error line" is turned back off again!
6441 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
6443 # This entry supports emacs (and any other program that uses raw
6444 # mode) at 4800 baud and less. I couldn't get the padding right
6447 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
6448 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
6451 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
6452 use=hp+labels, use=scrhp,
6454 # This hp2626 entry does not use any of the fancy windowing stuff
6457 # Indeed, terminfo does not yet handle such stuff. Since changing
6458 # any window clears memory, it is probably not possible to use
6459 # this for screen opt.
6461 # ed is incredibly slow most of the time - I am guessing at the
6462 # exact padding. Since the terminal uses xoff/xon this is intended
6463 # only for cost computation, so that the terminal will prefer el
6464 # or even dl1 which is probably faster!
6466 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
6467 # extra slow on the last line of the window.
6469 # The padding probably should be changed.
6471 hp2626|hp2626a|hp2626p|hp 2626,
6474 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
6475 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
6476 use=hp+labels, use=scrhp,
6478 # This entry is for sysline. It allocates a 23 line window with
6479 # a 115 line workspace for regular use, and a 1 line window for
6482 # This assumes port 2 is being used.
6483 # Turn off horizontal line, Create ws #1 with 115 lines,
6484 # Create ws #2 with 1 line, Create window #1 lines 1-23,
6485 # Create window #2 lines 24-24, Attach cursor to workspace #1.
6486 # Note that this clears the tabs so it must be done by tset before
6489 hp2626-s|hp 2626 using only 23 lines,
6492 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
6493 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
6494 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
6495 # Force terminal back to 24 lines after being 23.
6496 hp2626-ns|hp 2626 using all 24 lines,
6497 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
6499 # Various entries useful for small windows on 2626.
6500 hp2626-12|hewlett-packard 2626 12 lines,
6501 lines#12, use=hp2626,
6502 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
6503 cols#40, lines#12, use=hp2626,
6504 hp2626-x40|hewlett-packard 2626 40 columns,
6505 cols#40, use=hp2626,
6506 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
6507 lines#11, use=hp2626-s,
6510 # hp2627 color tubes from University of Wisconsin
6512 hp2627a-rev|hp 2627 with reverse video colors,
6513 cr=^M, cud1=^J, ht=^I, ind=^J,
6514 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
6515 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
6516 smul=\E&dD\E&v1S, use=hp2621-nl,
6517 hp2627a|hp 2627 color terminal with no labels,
6518 cr=^M, cud1=^J, ht=^I, ind=^J,
6519 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
6520 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
6521 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
6523 hp2627c|hp 2627 color (cyan) terminal with no labels,
6524 cr=^M, cud1=^J, ht=^I, ind=^J,
6525 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
6526 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
6528 # hp2640a doesn't have the Y cursor addressing feature, and C is
6529 # memory relative instead of screen relative, as we need.
6532 cup@, rmkx@, smkx@, use=hp2645,
6534 hp2640b|hp2644a|hp 264x series,
6535 rmkx@, smkx@, use=hp2645,
6537 # (hp2641a: removed unknown :gu: -- esr)
6538 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
6539 am, da, db, mir, xhp,
6541 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6542 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6543 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
6544 if=/usr/share/tabset/std, il1=\EL, ind=^J,
6545 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6546 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6549 # This terminal should be used at 4800 baud or less. It needs padding for
6550 # plain characters at 9600, I guessed at an appropriate cr delay. It really
6551 # wants ^E/^F handshaking, but that doesn't work well even if you write
6552 # software to support it.
6553 hp2645|hp45|HP 2645 series,
6555 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
6556 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6557 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
6558 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
6560 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
6561 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
6562 # You should use this terminal at 4800 baud or less.
6563 hp2648|hp2648a|HP 2648a graphics terminal,
6564 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
6565 dch1=\EP$<7>, ip=$<5>, use=hp2645,
6567 # The HP 150 terminal is a fairly vanilla HP terminal, with the
6568 # clreol standout problem. It also has graphics capabilities and
6569 # a touch screen, which we don't describe here.
6570 hp150|hewlett packard Model 150,
6573 # HP 2382a terminals, "the little ones." They don't have any
6574 # alternate character set support and sending out ^N/^O will
6575 # leave the screen blank.
6576 hp2382a|hp2382|hewlett packard 2382a,
6580 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6582 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
6583 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
6585 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
6586 use=hp+pfk+arrows, use=hp2621-fl,
6588 # newer hewlett packard terminals
6590 newhpkeyboard|generic entry for HP extended keyboard,
6591 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6592 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6593 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
6594 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
6597 newhp|generic entry for new hewlett packard terminals,
6598 am, bw, mir, xhp, xon,
6599 cols#80, lines#24, pb#4800,
6600 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
6601 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
6602 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
6603 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
6604 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
6605 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
6606 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
6607 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
6608 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
6609 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
6610 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
6611 tbc=\E3, use=newhpkeyboard,
6613 memhp|memory relative addressing for new HP ttys,
6615 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
6616 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
6617 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
6618 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
6620 scrhp|screen relative addressing for new HP ttys,
6621 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
6622 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
6623 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
6624 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
6625 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6627 # (hp+labels: added label values from a BRL termcap -- esr)
6628 hp+labels|"standard" label info for new HP ttys,
6630 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
6631 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6632 rmln=\E&j@, smln=\E&jB,
6634 hp+printer|"standard" printer info for HP ttys,
6635 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
6638 # The new hp2621b is kind of a cross between the old 2621 and the
6639 # new 262x series of machines. It has dip-switched options.
6640 # The firmware has a bug in it such that if you give it a null
6641 # length label, the following character is eaten!
6642 hp2621b|hp 2621b with old style keyboard,
6643 lh#1, lm#48, lw#8, nlab#8,
6644 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6645 kind=\ET, kll=\EF, kri=\ES,
6646 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
6647 smln=\E&jB, use=hp2621,
6649 hp2621b-p|hp 2621b with printer,
6650 use=hp+printer, use=hp2621b,
6652 # hp2621b - new 2621b with new extended keyboard
6653 # these are closer to the new 26xx series than the other 2621b
6654 hp2621b-kx|hp 2621b with extended keyboard,
6655 use=newhpkeyboard, use=hp2621b,
6657 hp2621b-kx-p|hp 2621b with new keyboard & printer,
6658 use=hp+printer, use=hp2621b-kx,
6660 # Some assumptions are made in the following entries.
6661 # These settings are NOT set up by the initialization strings.
6663 # Port Configuration
6664 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
6666 # Terminal Configuration
6667 # InhHndShk(G)=Yes InhDC2(H)=Yes
6668 # XmitFnctn(A)=No InhEolWrp=No
6671 # Hp 2622a & hp2623a display and graphics terminals
6673 hp2622|hp2622a|hp 2622,
6676 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
6678 # The 2623 is a 2622 with extra graphics hardware.
6679 hp2623|hp2623a|hp 2623,
6682 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
6683 use=hp+printer, use=hp2624,
6685 # The hewlett packard B can have an optional extra 6 pages of memory.
6686 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
6689 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
6690 lm#240, use=hp2624b-p,
6692 # Color manipulations for HP terminals
6693 hp+color|hp with colors,
6695 colors#16, ncv#17, pairs#7,
6696 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
6697 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
6698 op=\E&v0S, scp=\E&v%p1%dS,
6700 # <is2> sets the screen to be 80 columns wide
6701 hp2397a|hp2397|hewlett packard 2397A color terminal,
6702 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6704 # HP 700/44 Setup parameters:
6705 # Terminal Mode HP-PCterm
6706 # Inhibit Auto Wrap NO
6707 # Status Line Host Writable
6708 # PC Character Set YES
6709 # Twenty-Five Line Mode YES
6710 # XON/XOFF @128 or 64 (sc)
6711 # Keycode Mode NO or YES (sc)
6712 # Backspace Key BS or BS/DEL
6714 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
6715 # \E\\? does not turn off keycode mode
6716 # <smsc> sets alternate start/stop; keycode on
6717 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6720 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6721 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6722 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6723 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6724 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6726 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6727 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6728 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6729 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6730 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6731 kpp=\E[5~, rmam=\E[?7l,
6732 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6733 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6734 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6735 smul=\E[4m, xoffc=g, xonc=e,
6737 # (hp2392: copied <rmir> here from hpex -- esr)
6740 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6741 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6742 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6743 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6746 hpsub|hp terminals -- capability subset,
6747 am, da, db, mir, xhp, xon,
6749 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6750 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6751 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6752 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6753 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6754 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6757 # May be used for most 24 x 80 hp terminals,
6758 # but has no padding added, so may allow runover in some terminals at high
6759 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6760 # hp98x5 terminal emulators or hp98x6 consoles.
6761 # Adds xy-cursor addressing, vertical cursor addressing, home,
6762 # last line, and underline capabilities.
6764 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6765 # moved <rmir> here from hpsub -- esr)
6766 hpex|hp extended capabilites,
6767 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6768 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6769 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6771 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6772 hp2|hpex2|hewlett-packard extended capabilities newer version,
6773 am, da, db, mir, xhp,
6774 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6775 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6776 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6777 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6778 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6779 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6780 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6781 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6782 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6783 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6784 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6785 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6786 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6787 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6788 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6789 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6790 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6791 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6794 # From: <ddavis@ic.berkeley.edu>
6795 hp236|hp236 internal terminal emulator,
6798 clear=\EF, cnorm=\EDE, cub1=^H,
6799 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6800 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6801 sgr0=\ECI, smso=\EBI,
6803 # This works on a hp300 console running Utah 4.3 BSD
6804 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6805 hp300h|HP Catseye console,
6806 OTbs, am, da, db, mir, xhp,
6807 cols#128, lines#51, lm#0, xmc#0,
6808 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6809 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6810 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6811 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6812 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6813 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6814 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6816 # From: Greg Couch <gregc@ernie.berkeley.edu>
6817 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6818 OTbs, am, da, db, mir, xhp,
6819 cols#128, it#8, lines#46, lm#0,
6820 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6821 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6822 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6823 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6824 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6825 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6826 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6827 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6828 tbc=\E3, vpa=\E&a%p1%dY,
6829 # HP 9845 desktop computer from BRL
6830 # (hp9845: removed unknown capability :gu: -- esr)
6832 OTbs, am, da, db, eo, mir, xhp,
6834 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6835 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6836 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
6837 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6838 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6839 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6840 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6841 hp98550|hp98550a|HP 9000 Series 300 color console,
6842 OTbs, am, da, db, mir, xhp,
6843 cols#128, it#8, lines#49, lm#0,
6844 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6845 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6846 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6847 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6848 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6849 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6850 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6851 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6852 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6853 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6854 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6855 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6856 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6857 # From: Victor Duchovni <vic@fine.princeton.edu>
6858 # (hp700-wy: removed obsolete ":nl=^J:";
6859 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6860 hp700-wy|HP700/41 emulating wyse30,
6861 OTbs, am, bw, mir, msgr,
6862 cols#80, it#8, lines#24, xmc#1,
6863 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6864 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6865 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6866 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6867 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6868 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6869 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6870 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6871 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6872 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6873 hp70092|hp70092a|hp70092A|HP 700/92,
6875 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6876 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6877 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6878 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6879 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6880 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6881 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6882 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6883 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6884 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6885 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6886 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6887 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6888 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6890 bobcat|sbobcat|HP 9000 model 300 console,
6891 am, da, db, mir, xhp,
6892 cols#128, it#8, lines#47, xmc#0,
6893 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6894 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6895 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6896 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6897 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6898 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6899 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6900 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6901 lines#94, use=gator,
6902 gator|HP 9000 model 237 emulating AAA,
6904 cols#128, it#8, lines#47,
6905 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6906 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6907 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6908 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6909 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6910 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6911 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6912 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6913 gator-52|HP 9000 model 237 emulating VT52,
6914 cols#128, lines#47, use=vt52,
6915 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6916 lines#94, use=gator-52,
6920 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6923 # Honeywell Bull terminal. Its cursor and function keys send single
6924 # control characters and it has standout/underline glitch. Most programs
6925 # do not like these features/bugs. Visual bell is realized by flashing the
6926 # "keyboard locked" LED.
6927 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6929 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6930 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6931 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6932 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6933 dku7003|Honeywell Bull DKU 7003 all features described,
6936 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6937 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6940 #### Lear-Siegler (adm)
6942 # These guys are long since out of the terminals business, but
6943 # in 1995 many current terminals still have an adm type as one of their
6944 # emulations (usually their stupidest, and usually labeled adm3, though
6945 # these `adm3' emulations normally have adm3a+ capabilities).
6947 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6948 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6949 # was being held to ground would trigger a send of the top line on the screen.
6950 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6951 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6952 # for clearing up this point.)
6954 adm1a|adm1|lsi adm1a,
6957 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6958 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6963 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6964 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6965 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6966 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6967 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6971 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6972 # The following ADM-3A switch settings are assumed for normal operation:
6973 # SPACE U/L_DISP CLR_SCRN 24_LINE
6974 # CUR_CTL LC_EN AUTO_NL FDX
6975 # Other switches may be set for operator convenience or communication
6976 # requirements. I recommend
6977 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6979 # Most of these terminals required an option ROM to support lower case display.
6980 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6981 # socket, you may be out of luck.
6983 # (adm3a: some capabilities merged in from BRl entry -- esr)
6987 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6988 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6989 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6993 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6996 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6997 rmso=\EG, smso=\EG, use=adm3a+,
6998 # A lot of terminals other than adm11s use these. Wherever you see
6999 # use=adm+sgr with some of its capabilities disabled, try the
7000 # disabled ones. They may well work but not have been documented or
7001 # expressed in the using entry. We'd like to cook up an <sgr> but the
7002 # <rmacs>/<smacs> sequences of the using entries vary too much.
7003 adm+sgr|adm style highlight capabilities,
7004 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
7005 smso=\EG4, smul=\EG8,
7006 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
7007 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
7008 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
7009 # be ^Z, according to his entry.
7010 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
7011 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
7014 OTkn#8, cols#80, lines#24,
7015 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
7016 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7017 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
7018 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7019 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7020 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
7022 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
7023 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
7024 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
7025 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
7026 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
7027 # via BRL. That entry asserted <xmc#1>, but I've left that out because
7028 # neither earlier nor later ADMSs have it -- esr)
7030 # You will need to get into the supervisor setup before you can set
7031 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
7032 # see a lot more setup options.
7034 # While in supervisor setup you can also use following codes:
7036 # Ctrl-P Personality character selections (configure for example what
7037 # arrow keys send, if I recall correctly)
7038 # Ctrl-T tabs 1-80 use left&right to move and up to set and
7039 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
7040 # Ctrl-B Binary setup (probably not needed. I think that everything can
7041 # be set using normal setup)
7042 # Ctrl-A Answerback mode (enter answerback message)
7043 # Ctrl-U User friendly mode (normal setup)
7044 # Ctrl-D Defaults entire setup and function keys from EPROM tables
7045 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
7046 # Ctrl-R Reads both setup and functions keys from NVM.
7047 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
7049 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
7050 # RTS/CTS used nowadays with virtually every modem and computer. 19200
7051 # bps works fine with hardware flow control.
7053 # The following null-modem cable should fix this and enable you to use
7054 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
7055 # set ADM-12+ for DTR handshaking from supervisor setup.
7068 OTbs, OTpt, am, mir,
7069 OTug#1, cols#80, it#8, lines#24,
7070 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7071 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7072 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
7073 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
7074 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7075 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7076 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
7078 # (adm20: removed obsolete ":kn#7:" -- esr)
7079 adm20|lear siegler adm20,
7081 cols#80, it#8, lines#24,
7082 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
7083 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
7084 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
7085 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
7087 adm21|lear siegler adm21,
7089 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
7090 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
7091 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
7093 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
7094 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
7095 # removed bogus-looking \200 from before <cup>. -- esr)
7099 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7100 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7101 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
7102 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
7103 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7104 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7105 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7106 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
7107 # ADM 31 DIP Switches
7109 # This information comes from two versions of the manual for the
7110 # Lear-Siegler ADM 31.
7114 # +-||||-------------------------------------+
7129 # +----------------------------------------------+
7130 # front of case (keyboard)
7132 # S1 - Data Rate - Modem
7133 # S2 - Data Rate - Printer
7134 # ------------------------
7136 # -------------------
7154 # S3 - Interface/Printer/Attributes
7155 # ---------------------------------
7156 # Printer Busy Control
7159 # off off off Busy not active, CD disabled
7160 # off off on Busy not active, CD enabled
7161 # off on off Busy active on J5-20, CD disabled
7162 # on off off Busy active on J5-19, CD disabled - Factory Set.
7163 # on off on Busy active on J5-19, CD enabled
7165 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
7167 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
7169 # sw6 ON enables printer BUSY active LOW - Factory Setting
7170 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
7172 # sw7 ON - steady cursor - Factory Setting
7173 # OFF - blinking cursor
7175 # sw8 ON causes selected attribute character to be displayed
7176 # OFF causes SPACE to be displayed instead - Factory Setting
7182 # sw4 sw1 sw2 sw3 sw4
7183 # ---------------------------
7184 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
7185 # Current Loop disabled - Factory Setting
7186 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
7188 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
7189 # Current Loop Disabled
7191 # sw5 ON disables dot stretching mode - Factory Setting
7192 # OFF enables dot stretching mode
7193 # sw6 ON enables blanking function
7194 # OFF enables underline function - Factory Setting
7195 # sw7 ON causes NULLS to be displayed as NULLS
7196 # OFF causes NULLS to be displayed as SPACES - Factory Setting
7198 # S5 - Word Structure
7199 # -------------------
7200 # sw1 ON enables BREAK key - Factory Setting
7201 # OFF disables BREAK key
7202 # sw2 ON selects 50Hz monitor refresh rate
7203 # OFF selects 60Hz monitor refresh rate - Factory Setting
7205 # Modem Port Selection
7208 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
7209 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
7210 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
7211 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
7212 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
7213 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
7214 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
7215 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
7217 # sw6 ON sends bit 8 a 1 (mark)
7218 # OFF sends bit 8 as 0 (space) - Factory Setting
7219 # sw7 ON selects Block Mode
7220 # OFF selects Conversation Mode - Factory Setting
7221 # sw8 ON selects Full Duplex operation
7222 # OFF selects Half Duplex operation - Factory Setting
7226 # sw1, sw2, sw6, sw7 Reserved - Factory 0
7228 # Printer Port Selection
7229 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
7231 # sw8 ON enables Printer Port
7232 # OFF disables Printer Port - Factory Setting
7234 # S7 - Polling Address
7235 # --------------------
7236 # sw1-7 Establish ASCII character which designates terminal polling address
7238 # OFF = logic 1 - Factory Setting
7239 # sw8 ON enables Polling Option
7240 # OFF disables Polling Option - Factory Setting
7243 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
7245 # This adm31 entry uses underline as the standout mode.
7246 # If the adm31 gives you trouble with standout mode, check the DIP switch in
7247 # position 6, bank @c11, 25% from back end of the circuit board. Should be
7248 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
7249 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
7250 adm31|lsi adm31 with sw6 set for underline mode,
7253 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7254 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7255 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
7256 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7257 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7258 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
7259 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
7260 adm31-old|o31|old adm31,
7261 rmul@, smso=\EG4, smul@, use=adm31,
7262 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
7266 if=/usr/share/tabset/vt100,
7267 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
7269 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
7273 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7274 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7275 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
7276 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
7277 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
7278 smir=\Eq, smul@, use=adm+sgr,
7279 # The following termcap for the Lear Siegler ADM-42 leaves the
7280 # "system line" at the bottom of the screen blank (for those who
7281 # find it distracting otherwise)
7282 adm42-ns|lsi adm-42 with no system line,
7283 cbt=\EI\EF \011, clear=\E;\EF \011,
7284 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
7285 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
7286 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
7287 smir=\Eq\EF \011, use=adm42,
7288 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
7289 # The insert mode of this terminal is commented out because it's broken for our
7290 # purposes in that it will shift the position of every character on the page,
7291 # not just the cursor line!
7292 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
7293 adm1178|1178|lsi adm1178,
7295 cols#80, lines#24, xmc#1,
7296 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
7297 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7298 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
7299 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
7300 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
7301 sgr0=\E), smso=\EG4, smul=\EG1,
7305 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
7306 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
7307 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
7309 # ComputerVision Services
7310 # 500 Old Connecticut Path
7314 # Standout mode is dim reverse-video.
7315 pt100|pt200|wren|fenix|prime pt100/pt200,
7317 cols#80, it#8, lines#24,
7318 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
7319 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
7320 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
7321 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
7322 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
7323 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
7324 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
7325 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
7327 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
7328 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
7329 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
7331 cup=\E[%i%p1%d;%p2%dH, use=pt100,
7333 rmso@, smso@, use=pt100,
7334 pt250w|Prime PT250 in 132-column mode,
7335 rmso@, smso@, use=pt100w,
7340 # 3475-A North 1st Street
7342 # Vox: (800)-457-4447
7343 # Fax: (408)-473-1510
7344 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
7346 # Qume was bought by Wyse, but still (as of early 1995) has its own support
7347 # group and production division.
7349 # Discontinued Qume models:
7351 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
7352 # built to replace them, and a qvt119+ which was a 101+ with available wide
7353 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
7354 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
7355 # ANSI-compatible terminals with the qvt323 and qvt61.
7357 # Current Qume models (as of February 1995):
7359 # All current Qume terminals have ANSI-compatible operation modes.
7360 # Qume is still producing the qvt62, which features emulations for other
7361 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
7362 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
7363 # with many emulations including Wyse370, Wyse 325, etc. Their newest
7364 # model is the qvt520, which is vt420-compatible.
7366 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
7368 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
7369 # setup mode. Shift-s should be a configuration save to NVRAM.
7371 qvt101|qvt108|qume qvt 101 and QVT 108,
7374 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
7375 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
7376 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
7377 # What seems to be going on here is that this entry was designed so that
7378 # the normal highlight is bold and standout is dim plus something else
7379 # (reverse-video maybe? But then, are there two <rev> sequences?)
7381 # Added kdch1, kil1, kdl1 based on screenshot -TD:
7382 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
7383 qvt101+|qvt101p|qume qvt 101 PLUS product,
7385 cols#80, lines#24, xmc#0,
7386 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
7387 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7388 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
7389 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7390 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
7391 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
7392 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
7393 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7394 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
7395 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7396 qvt102|qume qvt 102,
7397 cnorm=\E., use=qvt101,
7398 # (qvt103: added <rmam>/<smam> based on init string -- esr)
7399 qvt103|qume qvt 103,
7401 cols#80, it#8, lines#24, vt#3,
7402 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
7403 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7404 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
7405 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
7406 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
7407 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
7408 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7409 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
7410 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
7411 rmso=\E[m$<2>, rmul=\E[m$<2>,
7412 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7413 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
7414 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
7415 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
7416 qvt103-w|qume qvt103 132 cols,
7418 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
7419 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
7421 cols#80, lines#24, xmc#0,
7422 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
7423 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7424 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
7425 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
7426 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
7427 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
7428 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7429 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7430 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
7431 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7432 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
7433 lines#25, use=qvt119+,
7434 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
7436 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
7437 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
7438 lines#25, use=qvt119+,
7439 qvt203|qvt203+|qume qvt 203 Plus,
7440 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
7441 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
7442 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
7443 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
7444 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
7446 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
7448 # Since a command is present for enabling 25 data lines,
7449 # a specific terminfo entry may be generated for the 203.
7450 # If one is desired for the QVT 119 PLUS then 25 lines must
7451 # be selected in the status line (setup line 9).
7453 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
7455 is2=\E[=40h\E[?3l, use=qvt203,
7456 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
7458 rs2=\E[?3h\E[=40h, use=qvt203,
7460 #### Televideo (tvi)
7463 # 550 East Brokaw Road
7464 # PO Box 49048 95161
7466 # Vox: (408)-954-8333
7467 # Fax: (408)-954-0623
7470 # These require incredible amounts of padding.
7472 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
7473 # Televideo terminals are ANSI and PC-ANSI compatible.
7475 tvi803|televideo 803,
7476 clear=\E*$<10>, use=tvi950,
7478 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
7479 # Switch settings are:
7500 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
7516 # U do CR/LF when CR received
7517 # D do CR when CR received
7539 # S2 6 Cursor down key
7543 # S2 7 Screen colour
7547 # S2 8 DSR status (pin 6)
7551 # S2 9 DCD status (pin 8)
7555 # S2 10 DTR status (pin 20)
7558 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
7559 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
7560 tvi910|televideo model 910,
7562 cols#80, it#8, lines#24, xmc#1,
7563 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7564 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
7565 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
7566 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
7567 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
7568 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7569 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7570 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
7571 # From: Alan R. Rogers <rogers%albany@csnet-relay>
7572 # as subsequently hacked over by someone at SCO
7573 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
7575 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
7578 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
7579 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
7580 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
7581 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
7584 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
7585 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
7586 # D U D D 8O1 D U U U 8E2
7588 # S1 9 Autowrap (U = on, D = off)
7589 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
7590 # S2 1 Mode (U = block, D = conversational)
7591 # S2 2 Duplex (U = half, D = full)
7592 # S2 3 Hertz (U = 50, D = 60)
7593 # S2 4 Edit mode (U = local, D = duplex)
7594 # S2 5 Cursor type (U = underline, D = block)
7595 # S2 6 Cursor down key (U = send ^J, D = send ^V)
7596 # S2 7 Screen colour (U = green on black, D = black on green)
7597 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
7598 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
7599 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
7601 tvi910+|televideo 910+,
7602 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
7603 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
7604 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
7605 ll=\E=7\s, use=tvi910,
7607 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
7608 # <khome> from BRL entry -- esr)
7609 tvi912|tvi914|tvi920|old televideo 912/914/920,
7610 OTbs, OTpt, am, msgr,
7611 cols#80, it#8, lines#24, xmc#1,
7612 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7613 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7614 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
7615 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
7616 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
7617 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7618 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7619 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
7621 # We got some new tvi912c terminals that act really weird on the regular
7622 # termcap, so one of our gurus worked this up. Seems that cursor
7623 # addressing is broken.
7624 tvi912cc|tvi912 at cowell college,
7627 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
7628 # From: Benjamin C. W. Sittler
7630 # Someone has put a scanned copy of the manual online at:
7631 # http://vt100.net/televideo/912b-om/
7633 # These terminals were produced ca. 1979, and had a 12" monochrome
7634 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7635 # ASCII, and were generally similar to adm3a but with attributes
7636 # (including some with magic cookies), fancy half-duplex mode, and
7639 # Some operations reqire truly incredible amounts of padding. The
7640 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
7641 # are so slow as to be nearly unusable.
7643 # There may or may not have been a separate, earlier series of 912/920
7644 # terminals (without the "B" and "C" suffix); I have never seen one,
7645 # and the manual only describes the "B" and "C" series. The 912 and 920
7646 # are quite distinct from the 914 and 924, which were much nicer non-
7647 # magic-cookie terminals similar to the 950.
7649 # This is a new description for the following TeleVideo terminals,
7650 # distinguished chiefly by their keyboards:
7652 # TVI-912B - very odd layout, no function keys (84 keys)
7653 # TVI-920B - typewriter layout, no function keys (103 keys)
7654 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
7655 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
7657 # To choose a setting for the TERM variable, start with the model:
7659 # Model || base name
7660 # ----------||-----------
7661 # TVI-912B || tvi912b
7662 # TVI-912C || tvi912c
7663 # TVI-920B || tvi920b
7664 # TVI-920C || tvi920c
7666 # Then add a suffix from the following table describing installed options
7667 # and how you'd like to use the terminal:
7669 # Use Video | Second | Visual | Magic | Page || feature
7670 # Attributes | Page | Bell | Cookies | Print || suffix
7671 # ------------|--------|--------|---------|-------||---------
7672 # No | No | N/A | N/A | No || -unk
7673 # No | No | N/A | N/A | Yes || -p
7674 # No | Yes | No | N/A | No || -2p-unk
7675 # No | Yes | No | N/A | Yes || -2p-p
7676 # No | Yes | Yes | N/A | No || -vb-unk
7677 # No | Yes | Yes | N/A | Yes || -vb-p
7678 # Yes | No | N/A | No | N/A ||
7679 # Yes | No | N/A | Yes | N/A || -mc
7680 # Yes | Yes | No | No | N/A || -2p
7681 # Yes | Yes | No | Yes | N/A || -2p-mc
7682 # Yes | Yes | Yes | No | N/A || -vb
7683 # Yes | Yes | Yes | Yes | N/A || -vb-mc
7685 # So e.g. a model 920 C with second page memory option, visual bell
7686 # and no magic cookies would be tvi920c-vb; a model 912 B without the
7687 # second page memory option and using magic cookies would be
7692 # At 9600 baud, the terminal is prone to overflow its input buffer
7693 # during complex operations (insert/delete
7694 # character/line/screen/page), and it does not signal this over the
7695 # RS232 cable. The typical symptom of an overrun is that the terminal
7696 # starts beeping, and output becomes garbled.
7698 # The padding delays in this terminfo were derived using tack(1)
7699 # running on a Linux box connected to a TVI-920C with a later-model
7700 # (A49C1-style) ROM running at 9600 baud, so your mileage may
7701 # vary. The numbers below seem to give the terminal enough time so
7702 # that it doesn't overflow its input buffer and start losing
7707 # If you want to use the FUNCT key on a tvi912[bc], use the
7708 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
7709 # the following table (these also work on the 920 series):
7711 # Unshifted Function Keys:
7713 # Key | capname|| Equivalent
7714 # -----|--------||------------
7715 # F1 | <kf1> || FUNCT + @
7716 # F2 | <kf2> || FUNCT + A
7717 # F3 | <kf3> || FUNCT + B
7718 # F4 | <kf4> || FUNCT + C
7719 # F5 | <kf5> || FUNCT + D
7720 # F6 | <kf6> || FUNCT + E
7721 # F7 | <kf7> || FUNCT + F
7722 # F8 | <kf8> || FUNCT + G
7723 # F9 | <kf9> || FUNCT + H
7724 # F10 | <kf10> || FUNCT + I
7725 # F11 | <kf11> || FUNCT + J
7727 # Shifted Function Keys:
7729 # SHIFT + Key | capname|| Equivalent
7730 # -------------|--------||------------
7731 # SHIFT + F1 | <kf12> || FUNCT + `
7732 # SHIFT + F2 | <kf13> || FUNCT + a
7733 # SHIFT + F3 | <kf14> || FUNCT + b
7734 # SHIFT + F4 | <kf15> || FUNCT + c
7735 # SHIFT + F5 | <kf16> || FUNCT + d
7736 # SHIFT + F6 | <kf17> || FUNCT + e
7737 # SHIFT + F7 | <kf18> || FUNCT + f
7738 # SHIFT + F8 | <kf19> || FUNCT + g
7739 # SHIFT + F9 | <kf20> || FUNCT + h
7740 # SHIFT + F10 | <kf21> || FUNCT + i
7741 # SHIFT + F11 | <kf22> || FUNCT + j
7743 # PORTS AND SWITCH SETTINGS
7745 # Here are the switch settings for the TVI-912B/TVI-920B and
7746 # TVI-912C/TVI-920C:
7748 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7749 # 2: 9600 3: 4800 4: 2400 5: 1200
7750 # 6: 600 7: 300 8: 150 9: 75
7753 # S2 UART/Terminal options:
7755 # 1: Not used Not allowed
7756 # 2: Alternate character set Standard character set
7757 # 3: Full duplex Half duplex
7758 # 4: 50 Hz refresh 60 Hz refresh
7759 # 5: No parity Send parity
7760 # 6: 2 stop bits 1 stop bit
7761 # 7: 8 data bits 7 data bits
7762 # 8: Not used Not allowed on Rev E or lower
7763 # 9: Even parity Odd parity
7764 # 10: Steady cursor Blinking cursor
7765 # (On Rev E or lower, use W25 instead of switch 10.)
7767 # S5 UART/Terminal options:
7769 # 1: P3-6 Not connected DSR received on P3-6
7770 # 2: P3-8 Not connected DCD received on P3-8
7772 # 3 Open, 4 Open: P3-20 Not connected
7773 # 3 Open, 4 Closed: DTR on when terminal is on
7774 # 3 Closed, 4 Open: DTR is connected to RTS
7775 # 3 Closed, 4 Closed: Not allowed
7777 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7778 # all data transmitted out of the modem port (P3) will also be
7779 # transmitted out of the printer port (P4).
7781 # 6 Open, 7 Open: Not allowed
7782 # 6 Open, 7 Closed: 20ma current loop input
7783 # 6 Closed, 7 Open: RS232 input
7784 # 6 Closed, 7 Closed: Not allowed
7787 # If the jumper is installed, the effect will occur (the next time the terminal
7790 # S4/W31: Enables automatic LF upon receipt of CR from
7791 # remote or keyboard.
7792 # S4/W32: Enables transmission of EOT at the end of Send. If not
7793 # installed, a carriage return is sent.
7794 # S4/W33: Disables automatic carriage return in column 80.
7795 # S4/W34: Selects Page Print Mode as initial condition. If not
7796 # installed, Extension Mode is selected.
7798 # NON-STANDARD CAPABILITIES
7800 # Sending <u9> or <u7> returns a cursor position report in the format
7801 # YX\r, where Y and X are as in <cup>. This format is described in
7802 # <u8> and <u6>, but it's not clear how one should write an
7803 # appropriate scanf string, since we need to subtract %' ' from the
7804 # character after reading it. The <u9> capability is used by tack(1)
7805 # to synchronize during padding tests, and seems to work for that
7808 # This description also includes the obsolete termcap capabilities
7809 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7811 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7813 # The FUNCT modifier actually works with every normal key by sending
7814 # ^AX\r, where X is the sequence normally sent by that key. This is a
7815 # sort of meta key not currently describable in terminfo.
7817 # There are quite a few other keys (especially on the 920 models,) but
7818 # they are for the most part only useful in block mode.
7820 # These terminals have lots of forms manipulation features, mainly
7821 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7822 # spaces"; nulls are sentinels for "send X" operations); "send X"
7823 # operations for uploading all or part of the screen; and block-mode
7824 # editing keys (they don't send escape sequences, but manipulate video
7825 # memory directly). Block mode is used for local editing, and protect
7826 # mode (in conjunction with the "write protect" attribute,
7827 # a.k.a. half-intensity outside of protect mode) is used to control
7828 # which parts of the screen are edited/sent/printed (by <mc0>).
7830 # There are at least two major families of ROM, "early" and
7831 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7832 # support a few extra escape sequences for manipulating the off-screen
7833 # memory page, and for sending whole pages back to the host (mainly
7834 # useful in block mode.) The descriptions in this file don't use any
7835 # of those sequences: set cursor position including page (\E-PYX,
7836 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7837 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7838 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7839 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7840 # are as in <cup>, and some "send page" features mainly useful for
7841 # forms manipulation.
7843 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7844 # except that a terminal reset (<is2>) enables the keyboard.
7846 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7847 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7851 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7852 # sequences (I infer that in some TeleVideo terminal they may invert
7853 # and uninvert the display) so the <flash> sequence given here is a
7854 # cheesy page-flip instead.
7856 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7857 # tack(1), so it is not included in the descriptions below.
7859 # It's not clear whether auto_left_margin (<bw>) flag should be set
7860 # for these terminals; tack says yes, so it is set here, but this
7861 # differs from other descriptions I've seen.
7863 # Extension print mode (<mc5>) echoes all characters to the printer
7864 # port [in addition to displaying them] except for the page print mode
7865 # sequence (<mc4>); this is a slight violation of the terminfo
7866 # definition for <mc5> but I don't expect it to cause problems. We
7867 # reset to page print mode in <rs1> since it may have been enabled
7870 # The descriptions with plus signs (+) are building blocks.
7872 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7874 cols#80, it#8, lines#24,
7875 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7876 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7877 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7878 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7879 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7880 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7881 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7882 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7883 u7=\E?, u8=%c%c\r, u9=\E?,
7885 # This isn't included in the basic capabilities because it is
7886 # typically unusable in combination with the full range of video
7887 # attributes, since the magic cookie attributes turn into ASCII
7888 # control characters, and the half-intensity ("protected") attribute
7889 # converts all affected characters to spaces.
7891 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7894 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7895 # exposes no other attributes (half-intensity is the only attribute
7896 # that does not generate a magic cookie.)
7898 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7900 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7903 # Full magic-cookie attribute support, with half-intensity reverse
7904 # video for standout. Note that we add a space in the <dim> sequence
7905 # to give a consistent magic-cookie count. Also note that <sgr> uses
7906 # backspacing (in the TVI-supported order) to apply all requested
7907 # attributes with only a single magic cookie.
7909 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7911 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7913 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7914 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7916 # This uses the second page memory option to save & restore screen
7917 # contents. If your terminal is missing the option, this description
7918 # should still work, but that has not been tested.
7920 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7921 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7922 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7924 # This simulates flashing by briefly toggling to the other page
7927 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7928 bel=\EK$<100>\EK, use=tvi912b+2p,
7930 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7932 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7933 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7934 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7935 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7936 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7937 kf8=^AG\r, kf9=^AH\r,
7939 # Combinations of the basic building blocks
7941 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7942 use=tvi912b+2p, use=tvi912b-unk,
7944 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7945 use=tvi912b+vb, use=tvi912b-unk,
7947 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7948 use=tvi912b+printer, use=tvi912b-unk,
7950 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7951 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7953 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7954 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7956 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7957 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7959 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7960 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7962 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7963 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7965 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7966 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7968 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7969 use=tvi912b+dim, use=tvi912b-unk,
7971 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7972 use=tvi912b+mc, use=tvi912b-unk,
7974 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7975 use=tvi920b+fn, use=tvi912b-unk,
7977 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7978 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7980 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7981 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7983 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7984 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7986 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7987 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7990 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7991 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7994 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7995 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7998 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7999 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
8002 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
8003 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
8006 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
8007 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
8010 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
8011 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
8013 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
8014 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
8016 # Televideo 921 and variants
8017 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
8018 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
8019 # also added empty <acsc> to suppress tic warning -- esr)
8020 tvi921|televideo model 921 with sysline same as page & real vi function,
8021 OTbs, OTpt, am, hs, xenl, xhp,
8022 cols#80, lines#24, xmc#0,
8023 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8024 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8025 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8026 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
8027 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
8028 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
8029 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
8030 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
8031 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
8032 # without the beeper
8033 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
8034 # also added empty <acsc> to suppress tic warning -- esr)
8035 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
8037 cols#80, lines#24, xmc#0,
8038 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8039 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8040 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8041 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
8042 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8043 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
8044 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8045 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
8046 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
8047 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
8048 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
8049 dl1=\ER$<2*/>, il1=\EE$<2*/>,
8050 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
8051 kil1=\EE$<2*/>, use=tvi92B,
8053 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
8054 # in from a BSD termcap file because it looks like they do something the
8055 # old ones skip -- esr)
8056 tvi924|televideo tvi924,
8057 am, bw, hs, in, mir, msgr, xenl, xon,
8058 cols#80, it#8, lines#24, wsl#80, xmc#0,
8059 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
8060 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
8061 cub1=^H, cud1=^V, cuf1=^L,
8062 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
8063 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
8064 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
8065 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8066 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
8067 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8068 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
8069 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
8070 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
8071 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
8072 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
8073 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
8074 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
8077 # TVI925 DIP switches. In each of these, D = Down and U = Up,
8079 # Here are the settings for the external (baud) switches (S1):
8082 # 7 8 9 10 [Printer]
8083 # 1 2 3 4 [Main RS232]
8084 # -----------------------------------------------------
8103 # Settings for word length and stop-bits (S1)
8105 # Position Description
8107 # ---------------------------
8114 # S2 (external) settings
8116 # Position Up Dn Description
8117 # --------------------------------------------
8119 # X Duplex edit (transmit editing keys)
8120 # --------------------------------------------
8121 # 2 X 912/920 emulation
8123 # --------------------------------------------
8127 # --------------------------------------------
8131 # --------------------------------------------
8135 # --------------------------------------------
8139 # --------------------------------------------
8143 # --------------------------------------------
8144 # 6 X White on black display
8145 # X Black on white display
8146 # --------------------------------------------
8149 # --------------------------------------------
8152 # --------------------------------------------
8155 # --------------------------------------------
8158 # --------------------------------------------
8159 # 10 X CR/LF (Auto LF)
8162 # S3 (internal switch) settings:
8164 # Position Up Dn Description
8165 # --------------------------------------------
8168 # --------------------------------------------
8171 # --------------------------------------------
8174 # --------------------------------------------
8177 # --------------------------------------------
8180 # --------------------------------------------
8181 # 4 X Blinking block cursor
8183 # --------------------------------------------
8184 # 4 X Blinking underline cursor
8186 # --------------------------------------------
8187 # 4 X Steady block cursor
8189 # --------------------------------------------
8190 # 4 X Steady underline cursor
8192 # --------------------------------------------
8193 # 6 X Screen blanking timer (ON)
8194 # X Screen blanking timer (OFF)
8195 # --------------------------------------------
8196 # 7 X Page attributes
8198 # --------------------------------------------
8199 # 8 X DCD disconnected
8201 # --------------------------------------------
8202 # 9 X DSR disconnected
8204 # --------------------------------------------
8205 # 10 X DTR Disconnected
8207 # --------------------------------------------
8209 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
8210 tvi925|televideo 925,
8211 OTbs, am, bw, hs, ul,
8212 cols#80, lines#24, xmc#1,
8213 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
8214 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8215 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
8216 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
8217 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
8218 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8219 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8220 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8221 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
8222 tsl=\Eh\Ef, use=adm+sgr,
8223 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
8224 # to avoid "magic cookie" standout glitch:
8225 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
8227 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
8229 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
8230 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
8231 # for additional capabilities,
8232 # The following tvi descriptions from B:pjphar and virus!mike
8233 # is for all 950s. It sets the following attributes:
8234 # full duplex (\EDF) write protect off (\E()
8235 # conversation mode (\EC) graphics mode off (\E%)
8236 # white on black (\Ed) auto page flip off (\Ew)
8237 # turn off status line (\Eg) clear status line (\Ef\r)
8238 # normal video (\E0) monitor mode off (\EX or \Eu)
8239 # edit mode (\Er) load blank char to space (\Ee\040)
8240 # line edit mode (\EO) enable buffer control (^O)
8241 # protect mode off (\E\047) duplex edit keys (\El)
8242 # program unshifted send key to send line all (\E016)
8243 # program shifted send key to send line unprotected (\E004)
8244 # set the following to nulls:
8245 # field delimiter (\Ex0\200\200)
8246 # line delimiter (\Ex1\200\200)
8247 # start-protected field delimiter (\Ex2\200\200)
8248 # end-protected field delimiter (\Ex3\200\200)
8249 # set end of text delimiter to carriage return/null (\Ex4\r\200)
8251 # TVI 950 Switch Setting Reference Charts
8255 # S1 1 2 3 4 5 6 7 8 9 10
8256 # +-----------------------+-----+-----+-----------------------+
8257 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
8259 # +------+-----------------------+-----+-----+-----------------------+
8260 # | Up | See | 7 | 2 | See |
8261 # +------+-----------------------+-----+-----+-----------------------+
8262 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
8263 # +------+-----------------------+-----+-----+-----------------------+
8266 # S2 1 2 3 4 5 6 7 8 9 10
8267 # +-----+-----+-----------------+-----+-----------+-----+-----+
8268 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
8269 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8270 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
8271 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8272 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
8273 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8277 # +-----------+-----+-----+-----+-----+-----------+
8278 # | Display | 1 | 2 | 3 | 4 | Baud |
8279 # +-----------+-----+-----+-----+-----+ |
8280 # | Printer | 7 | 8 | 9 | 10 | Rate |
8281 # +-----------+-----+-----+-----+-----+-----------+
8282 # | D | D | D | D | 9600 |
8283 # | U | D | D | D | 50 |
8284 # | D | U | D | D | 75 |
8285 # | U | U | D | D | 110 |
8286 # | D | D | U | D | 135 |
8287 # | U | D | U | D | 150 |
8288 # | D | U | U | D | 300 |
8289 # | U | U | U | D | 600 |
8290 # | D | D | D | U | 1200 |
8291 # | U | D | D | U | 1800 |
8292 # | D | U | D | U | 2400 |
8293 # | U | U | D | U | 3600 |
8294 # | D | D | U | U | 4800 |
8295 # | U | D | U | U | 7200 |
8296 # | D | U | U | U | 9600 |
8297 # | U | U | U | U | 19200 |
8298 # +-----+-----+-----+-----+-----------+
8301 # +-----+-----+-----+-----------+
8302 # | 3 | 4 | 5 | Parity |
8303 # +-----+-----+-----+-----------+
8304 # | X | X | D | None |
8305 # | D | D | U | Odd |
8306 # | D | U | U | Even |
8307 # | U | D | U | Mark |
8308 # | U | U | U | Space |
8309 # +-----+-----+-----+-----------+
8313 # +-----+-----+-----------------+
8314 # | 7 | 8 | Communication |
8315 # +-----+-----+-----------------+
8316 # | D | D | Half Duplex |
8317 # | D | U | Full Duplex |
8320 # +-----+-----+-----------------+
8322 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
8323 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
8324 # should be present and all tvi native modes use the same string for this.
8325 # Finally, note that BSD has cud1=^V. -- esr)
8326 tvi950|televideo 950,
8327 OTbs, am, hs, mir, msgr, xenl, xon,
8328 cols#80, it#8, lines#24, xmc#1,
8329 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
8330 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8331 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8332 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
8333 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
8335 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
8336 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
8337 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
8338 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8339 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8340 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
8341 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
8344 # is for 950 with two pages adds the following:
8345 # set 48 line page (\E\\2)
8346 # place cursor at page 0, line 24, column 1 (\E-07 )
8347 # set local (no send) edit keys (\Ek)
8349 # two page 950 adds the following:
8350 # when entering ex, set 24 line page (\E\\1)
8351 # when exiting ex, reset 48 line page (\E\\2)
8352 # place cursor at 0,24,1 (\E-07 )
8353 # set duplex (send) edit keys (\El) when entering vi
8354 # set local (no send) edit keys (\Ek) when exiting vi
8356 tvi950-2p|televideo950 w/2 pages,
8357 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
8358 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8359 smkx=\El, use=tvi950,
8361 # is for 950 with four pages adds the following:
8362 # set 96 line page (\E\\3)
8363 # place cursor at page 0, line 24, column 1 (\E-07 )
8365 # four page 950 adds the following:
8366 # when entering ex, set 24 line page (\E\\1)
8367 # when exiting ex, reset 96 line page (\E\\3)
8368 # place cursor at 0,24,1 (\E-07 )
8370 tvi950-4p|televideo950 w/4 pages,
8371 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
8372 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8373 smkx=\El, use=tvi950,
8375 # <is2> for reverse video 950 changes the following:
8376 # set reverse video (\Ed)
8378 # set vb accordingly (\Ed ...delay... \Eb)
8380 tvi950-rv|televideo950 rev video,
8381 flash=\Ed$<200/>\Eb,
8382 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
8385 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
8386 tvi950-rv-2p|televideo950 rev video w/2 pages,
8387 flash=\Ed$<200/>\Eb,
8388 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
8389 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8390 smkx=\El, use=tvi950,
8392 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
8393 tvi950-rv-4p|televideo950 rev video w/4 pages,
8394 flash=\Ed$<200/>\Eb,
8395 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
8396 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8397 smkx=\El, use=tvi950,
8398 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
8399 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
8400 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
8401 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
8402 # the :ko: string had :cl: in it, which means that one of the original
8403 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
8404 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
8405 # ko implies -- esr)
8406 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
8408 tvi955|televideo 955,
8411 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
8412 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
8413 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
8414 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
8415 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
8416 rmam=\E[=7l, rmxon=^N,
8417 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
8418 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
8420 tvi955-w|955-w|televideo955 w/132 cols,
8422 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
8423 # use half-intensity as normal mode, full intensity as <bold>
8424 tvi955-hb|955-hb|televideo955 half-bright,
8425 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
8426 sgr0=\EG0\E[=5h, use=tvi955,
8427 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
8428 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
8429 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
8430 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
8431 # it does to the function keys. I deduced <rmam>/<smam>.
8432 # also added empty <acsc> to suppress tic warning, -- esr)
8433 tvi970|televideo 970,
8434 OTbs, OTpt, am, da, db, mir, msgr,
8435 cols#80, it#8, lines#24,
8436 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
8437 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
8438 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
8439 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
8440 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
8441 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
8442 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8443 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
8444 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
8445 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
8446 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
8447 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
8448 smul=\E[4m, vpa=\E[%i%p1%dd,
8449 tvi970-vb|televideo 970 with visual bell,
8450 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8452 tvi970-2p|televideo 970 with using 2 pages of memory,
8453 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
8455 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
8456 # per line (rather than 40), Esc K chooses the normal character set. Not sure
8457 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
8458 # <smul> strings are klutzy, but at least use no screen space.
8459 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
8460 # its absence means <smam>=\Ev isn't safe to use. -- esr)
8461 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
8462 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
8463 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
8464 tvipt|televideo personal terminal,
8467 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
8468 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
8469 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
8470 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
8471 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
8472 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
8473 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
8474 tvi9065|televideo 9065,
8475 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
8476 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
8478 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
8479 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
8480 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
8481 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
8482 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
8483 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
8484 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
8485 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8486 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
8487 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
8489 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
8490 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
8491 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8492 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
8493 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8494 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
8495 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
8496 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
8497 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
8498 pfx=\E|%p1%{48}%+%c1%p2%s\031,
8499 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
8500 rep=\E[%p2%db%p1%c, rev=\EG4,
8501 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
8502 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
8503 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
8504 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
8505 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
8506 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
8507 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
8508 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
8509 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
8510 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
8514 # In September 1993, Visual Technology of Westboro, Massachusetts,
8515 # merged with White Pine Software of Nashua, New Hampshire.
8517 # White Pine Software may be contacted at +1 603/886-9050.
8518 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
8521 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
8522 # Recently I hacked together the following termcap for Visual
8523 # Technology's Visual 50 terminal. It's a slight modification of
8525 # It's intended to run when the Visual 50 is in vt52 emulation mode
8526 # (I know what you're thinking; if it's emulating a vt52, then why
8527 # another termcap? Well, it turns out that the Visual 50 can handle
8528 # <dl1> and db(?) among other things, which the vt52 can't)
8529 # The termcap works OK for the most part. The only problem is on
8530 # character inserts. The whole line gets painfully redrawn for each
8531 # character typed. Any suggestions?
8532 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
8533 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
8534 # disguise; <kf7>-<kf9> are really l1-l3.
8536 OTbs, OTpt, am, da, db, msgr,
8537 cols#80, it#8, lines#24,
8538 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
8539 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8540 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
8541 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
8542 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
8543 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
8544 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
8545 # this one was BSD & SCO's vi50
8546 vi50adm|visual 50 in adm3a mode,
8548 cols#80, it#8, lines#24,
8549 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8550 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
8551 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
8552 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
8554 # From: Jeff Siegal <jbs@quiotix.com>
8556 OTbs, am, mir, msgr,
8557 cols#80, it#8, lines#24,
8558 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
8559 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8560 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
8561 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
8562 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
8565 # Visual 200 from BRL
8566 # The following switch settings are assumed for normal operation:
8567 # FULL_DUPLEX SCROLL CR
8568 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
8569 # Other switches may be set for operator convenience or communication
8571 # Character insertion is kludged in order to get around the "beep" misfeature.
8572 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
8573 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
8574 # and <dl1> strings, but we seem to get along fine without them.
8576 OTbs, OTpt, am, mir, msgr,
8577 OTkn#10, cols#80, it#8, lines#24,
8578 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
8579 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8580 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
8581 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
8582 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8583 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
8584 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
8585 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
8586 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
8587 rmacs=\EG, rmkx=\E>, rmso=\E3,
8588 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
8589 smkx=\E=, smso=\E4, tbc=\Eg,
8590 # The older Visuals didn't come with function keys. This entry uses
8591 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
8592 # If your version of vi doesn't support function keys you may want
8594 vi200-f|visual 200 no function keys,
8595 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
8596 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
8597 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
8599 vi200-rv|visual 200 reverse video,
8600 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
8602 # the function keys are programmable but we don't reprogram them to their
8603 # default values with <is2> because programming them is very verbose. maybe
8604 # an initialization file should be made for the 300 and they could be stuck
8606 # (vi300: added <rmam>/<smam> based on init string -- esr)
8607 vi300|visual 300 ansi x3.64,
8610 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
8611 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8612 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8614 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
8615 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8616 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
8617 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
8618 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
8619 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
8620 smso=\E[1m, smul=\E[4m,
8621 # some of the vi300s have older firmware that has the command
8622 # sequence for setting editing extent reversed.
8623 vi300-old|visual 300 with old firmware (set edit extent reversed),
8624 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
8627 # Visual 500 prototype entry from University of Wisconsin.
8628 # The best place to look for the escape sequences is page A1-1 of the
8629 # Visual 500 manual. The initialization sequence given here may be
8630 # overkill, but it does leave out some of the initializations which can
8631 # be done with the menus in set-up mode.
8632 # The :xp: line below is so that emacs can understand the padding requirements
8633 # of this slow terminal. :xp: is 10 time the padding factor.
8634 # (vi500: removed unknown :xp#4: termcap;
8635 # also added empty <acsc> to suppress tic warning -- esr)
8638 cols#80, it#8, lines#33,
8639 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
8640 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
8641 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8642 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
8643 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
8645 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
8646 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8647 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
8648 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
8650 # The visual 550 is a visual 300 with tektronix graphics,
8651 # and with 33 lines. clear screen is modified here to
8652 # also clear the graphics.
8653 vi550|visual 550 ansi x3.64,
8655 clear=\030\E[H\E[2J, use=vi300,
8657 vi603|visual603|visual 603,
8659 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
8660 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
8661 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8662 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
8663 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
8664 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8665 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
8671 # 3471 North First Street
8672 # San Jose, CA 95134
8673 # Vox: (408)-473-1200
8674 # Fax: (408) 473-1222
8675 # Web: http://www.wyse.com
8677 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
8678 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
8679 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
8680 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
8682 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
8683 # They now own the Qume and Amdek brands, too. So these are the people to
8684 # talk with about all Link, Qume, and Amdek terminals.
8686 # These entries include a few small fixes.
8687 # I canceled the bel capacities in the vb entries.
8688 # I made two trivial syntax fixes in the wyse30 entry.
8689 # I made some entries relative to adm+sgr.
8692 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
8694 # Although the Wyse 30 can support more than one attribute
8695 # it requires magic cookies to do so. Many applications do not
8696 # function well with magic cookies. The following terminfo uses
8697 # the protect mode to support one attribute (dim) without cookies.
8698 # If more than one attribute is needed then the wy30-mc terminfo
8701 wy30|wyse30|Wyse 30,
8702 am, bw, hs, mc5i, mir, msgr, xon,
8703 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8704 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8705 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
8706 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8707 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
8708 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
8709 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
8710 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
8711 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
8712 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
8713 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8714 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
8715 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
8716 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
8717 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
8718 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8719 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8720 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8721 smso=\E`7\E), tbc=\E0, tsl=\EF,
8723 # This terminal description uses the non-hidden attribute mode
8724 # (with magic cookie).
8726 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8727 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8730 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8731 rmcup=\EG0, rmso=\EG0,
8732 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8733 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8734 smso=\EG4, use=wy30, use=adm+sgr,
8735 # The mandatory pause used by <flash> does not work with
8736 # older versions of terminfo. If you see this effect then
8737 # unset xon and delete the / from the delay.
8738 # i.e. change $<100/> to $<100>
8739 wy30-vb|wyse30-vb|wyse 30 visible bell,
8742 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8743 # Normal) without magic cookies by using the protect mode.
8744 # The following description uses this feature, but when more
8745 # than one attribute is put on the screen at once, all attributes
8746 # will be changed to be the same as the last attribute given.
8747 # The Wyse 50 can support more attributes when used with magic
8748 # cookies. The wy50-mc terminal description uses magic cookies
8749 # to correctly handle multiple attributes on a screen.
8751 wy50|wyse50|Wyse 50,
8752 am, bw, hs, mc5i, mir, msgr, xon,
8753 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8754 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8755 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8756 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8757 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8758 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8759 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8760 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8761 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8762 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8763 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8764 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8765 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8766 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8767 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8768 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8769 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8770 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8771 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8772 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8773 smso=\E`6\E), tbc=\E0, tsl=\EF,
8775 # This terminal description uses the non-hidden attribute mode
8776 # (with magic cookie).
8778 # The mandatory pause used by flash does not work with some
8779 # older versions of terminfo. If you see this effect then
8780 # unset <xon> and delete the / from the delay.
8781 # i.e. change $<100/> to $<100>
8782 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8783 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8786 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8787 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8788 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8789 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8790 smso=\EGt, use=wy50, use=adm+sgr,
8791 wy50-vb|wyse50-vb|wyse 50 visible bell,
8793 wy50-w|wyse50-w|wyse 50 132-column,
8794 cols#132, lw#7, nlab#16, wsl#97,
8795 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8797 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8801 # The Wyse 350 is a Wyse 50 with color.
8802 # Unfortunately this means that it has magic cookies.
8803 # The color attributes are designed to overlap the reverse, dim and
8804 # underline attributes. This is nice for monochrome applications
8805 # because you can make underline stuff green (or any other color)
8806 # but for true color applications it's not so hot because you cannot
8807 # mix color with reverse, dim or underline.
8808 # To further complicate things one of the attributes must be
8809 # black (either the foreground or the background). In reverse video
8810 # the background changes color with black letters. In normal video
8811 # the foreground changes colors on a black background.
8812 # This terminfo uses some of the more advanced features of curses
8813 # to display both color and blink. In the final analysis I am not
8814 # sure that the wy350 runs better with this terminfo than it does
8815 # with the wy50 terminfo (with user adjusted colors).
8817 # The mandatory pause used by flash does not work with
8818 # older versions of terminfo. If you see this effect then
8819 # unset xon and delete the / from the delay.
8820 # i.e. change $<100/> to $<100>
8822 # Bug: The <op> capability resets attributes.
8823 wy350|wyse350|Wyse 350,
8824 am, bw, hs, mc5i, mir, xon,
8825 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8827 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8828 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8829 cub1=^H, cud1=^J, cuf1=^L,
8830 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8831 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8832 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8833 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8834 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8835 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8836 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8837 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8838 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8839 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8840 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8841 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8842 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8843 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8844 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8845 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8846 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8847 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8848 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8849 wy350-vb|wyse350-vb|wyse 350 visible bell,
8851 wy350-w|wyse350-w|wyse 350 132-column,
8852 cols#132, lw#7, nlab#16, wsl#97,
8853 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8855 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8858 # This terminfo description is untested.
8859 # The wyse100 emulates an adm31, so the adm31 entry should work.
8863 cols#80, lines#24, xmc#1,
8864 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8865 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8866 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8867 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8868 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8869 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8870 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8872 # The Wyse 120/150 has most of the features of the Wyse 60.
8873 # This terminal does not need padding up to 9600 baud!
8874 # <msgr> should be set but the clear screen fails when in
8875 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8878 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8879 am, bw, hs, km, mc5i, mir, msgr, xon,
8880 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8881 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8882 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8883 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8884 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8885 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8886 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8887 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8888 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8889 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8890 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8891 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8892 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8893 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8894 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8895 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8896 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8897 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8898 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8899 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8900 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8901 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8903 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8904 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8905 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8906 tbc=\E0, tsl=\EF, use=adm+sgr,
8908 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8909 cols#132, lw#7, nlab#16, wsl#97,
8910 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8911 rs2=\E`;$<70>, use=wy120,
8913 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8914 lh@, lines#25, lw@, nlab@,
8915 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8917 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8918 lh@, lines#25, lw@, nlab@,
8919 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8921 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8924 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8927 # The Wyse 60 is like the Wyse 50 but with more padding.
8928 # The reset strings are slow and the pad times very depending
8929 # on other parameters such as font loading. I have tried
8930 # to follow the following outline:
8932 # <rs1> -> set personality
8933 # <rs2> -> set number of columns
8934 # <rs3> -> set number of lines
8935 # <is1> -> select the proper font
8936 # <is2> -> do the initialization
8937 # <is3> -> set up display memory (2 pages)
8939 # The Wyse 60's that have vt100 emulation are slower than the
8940 # older Wyse 60's. This change happened mid-1987.
8941 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8943 # The meta key is only half right. This terminal will return the
8944 # high order bit set when you hit CTRL-function_key
8946 # It may be useful to assign two function keys with the
8947 # values \E=(\s look at old data in page 1
8948 # \E=W, look at bottom of page 1
8949 # where \s is a space ( ).
8952 # The Wyse 60 runs faster when the XON/XOFF
8953 # handshake is turned off.
8955 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8956 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8957 wy60|wyse60|Wyse 60,
8958 am, bw, hs, km, mc5i, mir, msgr,
8959 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8960 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8961 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8962 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8963 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8964 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8965 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8966 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8967 ip=$<3>, is1=\EcB0\EcC1,
8968 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8969 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8970 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8971 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8972 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8973 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8974 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8975 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8976 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8977 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8978 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8979 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8980 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8981 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8982 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8983 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8984 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8985 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8986 tbc=\E0, tsl=\EF, use=adm+sgr,
8988 wy60-w|wyse60-w|wyse 60 132-column,
8989 cols#132, lw#7, nlab#16, wsl#97,
8990 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8991 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8993 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8994 lh@, lines#25, lw@, nlab@,
8995 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8996 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8997 lh@, lines#25, lw@, nlab@,
8998 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
9000 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
9002 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
9003 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
9004 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
9005 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
9006 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
9007 cols#132, lw#7, nlab#16, wsl#97,
9008 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9009 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
9010 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
9012 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
9013 lh@, lines#43, lw@, nlab@,
9014 pln@, rs3=\Ee+$<150>, use=wy60-42,
9015 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
9016 lh@, lines#43, lw@, nlab@,
9017 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
9019 wy60-vb|wyse60-vb|Wyse 60 visible bell,
9021 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
9024 # The Wyse-99GT looks at lot like the Wyse 60 except that it
9025 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
9026 # setup parameter controls the number of lines on the screen.
9027 # For the Wyse 99GT the "lines" setup parameter controls the
9028 # number of lines in a page. The screen can display 25 lines max.
9029 # The Wyse-99GT also has personalities for the VT220 and
9030 # Tektronix 4014. But this has no bearing on the native mode.
9032 # (msgr) should be set but the clear screen fails when in
9033 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9034 # then set msgr, else use msgr@.
9036 # u0 -> enter Tektronix mode
9037 # u1 -> exit Tektronix mode
9039 wy99gt|wyse99gt|Wyse 99gt,
9041 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
9042 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
9043 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
9044 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
9045 u0=\E~>\E8, u1=\E[42h, use=wy60,
9047 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
9048 cols#132, lw#7, nlab#16, wsl#97,
9049 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9050 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
9053 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
9054 lh@, lines#25, lw@, nlab@,
9055 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
9057 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
9058 lh@, lines#25, lw@, nlab@,
9059 pln@, rs2=\E`;$<150>, use=wy99gt-w,
9061 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
9064 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
9067 # Can't set tabs! Other bugs (ANSI mode only):
9068 # - can't redefine function keys (anyway, key redefinition in ANSI mode
9069 # is too much complex to be described);
9070 # - meta key can't be described (the terminal forgets it when reset);
9071 # The xon-xoff handshaking can't be disabled while in ansi personality, so
9072 # emacs can't work at speed greater than 9600 baud. No padding is needed at
9074 # dch1 has been commented out because it causes annoying glittering when
9075 # vi deletes one character at the beginning of a line with tabs in it.
9076 # dch makes sysgen(1M) have a horrible behaviour when deleting
9077 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
9078 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
9079 # not, so smir and rmir are commented out as well.
9080 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9081 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
9082 am, km, mc5i, mir, msgr, xenl,
9083 cols#80, it#8, lines#25, vt#3,
9084 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
9085 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9086 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
9087 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
9088 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
9089 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
9090 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
9091 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
9092 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
9093 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
9094 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
9095 il1=\E[L, ind=\n$<1>, invis=\E[8m,
9096 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
9097 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9098 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
9099 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
9100 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
9101 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
9102 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
9103 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
9104 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
9105 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
9106 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
9108 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
9109 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
9110 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9112 # This is the american terminal. Here tabs work fine.
9113 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9114 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
9115 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
9117 # This terminal (firmware version 02) has a lot of bugs:
9119 # - other bugs in ANSI modes (see above).
9120 # This description disables handshaking when using cup. This is because
9121 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
9122 # cannot be used at speeds greater than 9600 baud, because at greater
9123 # speeds handshaking is needed even for character sending. If you use
9124 # DTR handshaking, you can use even greater speeds.
9125 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9126 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
9127 am, bw, hs, km, mc5i, mir, msgr, xon,
9128 cols#80, it#8, lines#25, wsl#46,
9129 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
9130 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
9131 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
9132 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9133 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
9134 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
9135 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
9137 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
9138 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
9139 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
9140 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
9141 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
9142 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
9143 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9144 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
9145 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
9146 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
9147 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
9148 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
9149 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
9150 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
9152 # This is the american terminal. Here tabs work.
9153 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9154 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
9155 hts=\E1, tbc=\E0, use=wy99f,
9158 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
9159 # The reset strings are slow and the pad times very depending
9160 # on other parameters such as font loading. I have tried
9161 # to follow the following outline:
9163 # <rs1> -> set personality
9164 # <rs2> -> set number of columns
9165 # <rs3> -> set number of lines
9166 # <is1> -> select the proper font
9167 # <is2> -> do the initialization
9168 # <is3> -> set up display memory (2 pages)
9170 # The display memory may be used for either text or graphics.
9171 # When "Display Memory = Shared" the terminal will have more pages
9172 # but garbage may be left on the screen when you switch from
9173 # graphics to text. If "Display Memory = Unshared" then the
9174 # text area will be only one page long.
9176 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9177 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9178 wy160|wyse160|Wyse 160,
9179 am, bw, hs, km, mc5i, mir, msgr,
9180 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
9181 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9182 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
9183 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9184 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
9185 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
9186 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
9187 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
9188 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9189 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9190 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9191 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9192 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9193 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9194 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9195 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9196 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
9197 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9198 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9199 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
9200 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
9201 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
9202 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
9203 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9204 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9205 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9206 tbc=\E0, tsl=\EF, use=adm+sgr,
9208 wy160-w|wyse160-w|wyse 160 132-column,
9209 cols#132, lw#7, nlab#16, wsl#90,
9210 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
9211 rs2=\EeF$<150>\E`;$<150>, use=wy160,
9213 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
9214 lh@, lines#25, lw@, nlab@,
9215 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
9216 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
9217 lh@, lines#25, lw@, nlab@,
9218 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
9220 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
9222 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
9223 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
9224 rs3=\Ee*$<150>, use=wy160,
9225 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
9226 cols#132, lw#7, nlab#16, wsl#90,
9227 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
9228 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
9230 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
9231 lh@, lines#43, lw@, nlab@,
9232 pln@, rs3=\Ee+$<150>, use=wy160-42,
9233 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
9234 lh@, lines#43, lw@, nlab@,
9235 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
9237 wy160-vb|wyse160-vb|Wyse 160 visible bell,
9239 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
9242 # The Wyse 75 is a vt100 lookalike without advanced video.
9244 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
9245 # Underline) without magic cookies. The following description
9246 # uses this capability, but when more than one attribute is
9247 # put on the screen at once, all attributes will be changed
9248 # to be the same as the last attribute given.
9249 # The Wyse 75 can support more attributes when used with magic
9250 # cookies. The wy75-mc terminal description uses magic cookies
9251 # to correctly handle multiple attributes on a screen.
9253 wy75|wyse75|wyse 75,
9254 am, hs, mc5i, mir, msgr, xenl, xon,
9255 cols#80, lines#24, ma#1, pb#1201, wsl#78,
9256 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9257 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
9258 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
9259 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
9260 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9261 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
9262 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
9263 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
9264 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
9265 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
9266 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9267 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9268 ind=\n$<2>, ip=$<1>,
9269 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
9270 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
9271 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
9272 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9273 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9274 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
9275 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
9276 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9277 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
9278 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
9279 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
9280 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
9281 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
9283 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
9284 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9285 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
9286 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
9288 # This terminal description uses the non-hidden attribute mode
9289 # (with magic cookie).
9291 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
9294 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
9295 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
9296 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
9297 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
9299 wy75-vb|wyse75-vb|wyse 75 with visible bell,
9302 wy75-w|wyse75-w|wyse 75 in 132 column mode,
9304 rs2=\E[35h\E[?3h$<80>, use=wy75,
9305 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
9309 # Wyse 85 emulating a vt220 7 bit mode.
9310 # 24 line screen with status line.
9312 # The vt220 mode permits more function keys but it wipes out
9313 # the escape key. I strongly recommend that <f11> be set to
9315 # The terminal may have to be set for 8 data bits and 2 stop
9316 # bits for the arrow keys to work.
9317 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
9318 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
9319 # <dch> leave trash on the screen when used without XON/XOFF.
9321 wy85|wyse85|wyse 85,
9322 am, hs, mc5i, mir, msgr, xenl, xon,
9323 cols#80, it#8, lines#24, wsl#80,
9324 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9325 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9326 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9327 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9328 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9329 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9330 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9331 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9332 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9333 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9334 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9335 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9336 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9337 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9338 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9339 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
9340 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9341 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9342 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
9343 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
9344 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
9345 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9346 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9347 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9348 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9350 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9351 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9352 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9353 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
9355 # Wyse 85 with visual bell.
9356 wy85-vb|wyse85-vb|wyse 85 with visible bell,
9357 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
9359 # Wyse 85 in 132-column mode.
9360 wy85-w|wyse85-w|wyse 85 in 132-column mode,
9362 rs2=\E[35h\E[?3h$<70>, use=wy85,
9364 # Wyse 85 in 132-column mode with visual bell.
9365 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
9368 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
9369 # This copes with an apparent firmware bug in the wy85. He writes:
9370 # "What I did was change leave the terminal cursor keys set to Normal
9371 # (instead of application), and change \E[ to \233 for all the keys in
9372 # terminfo. At one point, I found some reference indicating that this
9373 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
9374 # me), but I can't find that and the server under my bookmark to "Wyse
9375 # Technical" isn't responding. So there's the question of wether the wy85
9376 # terminfo should reflect the manufactuer's intended behaviour of the terminal
9378 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
9379 am, hs, mc5i, mir, msgr, xenl, xon,
9380 cols#80, it#8, lines#24, wsl#80,
9381 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9382 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9383 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9384 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9385 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9386 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9387 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9388 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9389 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9390 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9391 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9392 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9393 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9394 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9395 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
9396 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
9397 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
9398 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
9399 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
9400 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
9401 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
9402 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
9403 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
9404 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9405 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9406 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9407 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9409 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
9410 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9411 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9412 tsl=\E[40h\E7\E[25;%i%p1%dH,
9414 # Wyse 185 emulating a vt320 7 bit mode.
9416 # This terminal always displays 25 lines. These lines may be used
9417 # as 24 data lines and a terminal status line (top or bottom) or
9418 # 25 data lines. The 48 and 50 line modes change the page size
9419 # and not the number of lines on the screen.
9421 # The Compose Character key can be used as a meta key if changed
9424 wy185|wyse185|wyse 185,
9425 am, hs, km, mc5i, mir, msgr, xenl, xon,
9426 cols#80, it#8, lines#24, wsl#80,
9427 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9428 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9429 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9430 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9431 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9432 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9433 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
9434 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9435 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
9436 el=\E[K, el1=\E[1K, enacs=\E)0,
9437 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
9438 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
9439 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
9440 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9441 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
9442 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9443 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
9444 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9445 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9446 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
9447 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9448 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
9449 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
9450 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
9451 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
9452 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9453 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9454 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9455 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9456 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9457 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9458 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
9461 # Wyse 185 with 24 data lines and top status (terminal status)
9462 wy185-24|wyse185-24|wyse 185 with 24 data lines,
9464 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9467 # Wyse 185 with visual bell.
9468 wy185-vb|wyse185-vb|wyse 185+flash,
9471 # Wyse 185 in 132-column mode.
9472 wy185-w|wyse185-w|wyse 185 in 132-column mode,
9474 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9475 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
9477 # Wyse 185 in 132-column mode with visual bell.
9478 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
9481 # wy325 terminfo entries
9482 # Done by Joe H. Davis 3-9-92
9484 # lines 25 columns 80
9486 wy325|wyse325|Wyse epc,
9487 am, bw, hs, mc5i, mir,
9488 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9489 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9490 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9491 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9492 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9493 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9494 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9495 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9496 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9497 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9498 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9499 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9500 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9501 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9502 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
9503 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9504 mc0=\EP, mc4=^T, mc5=\Ed#,
9505 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9506 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9507 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9508 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
9509 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9511 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9512 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9513 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
9514 tsl=\EF, use=adm+sgr,
9517 # lines 24 columns 80 vb
9519 wy325-vb|wyse325-vb|wyse-325 with visual bell,
9523 # lines 24 columns 132
9525 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
9526 cols#132, lw#7, nlab#16, wsl#97,
9527 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9528 rs2=\E`;$<70>, use=wy325,
9530 # lines 25 columns 80
9532 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
9533 lh@, lines#25, lw@, nlab@,
9534 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9536 # lines 25 columns 132
9538 wy325-25w|wyse325-25w|wy325 132 columns,
9539 lh@, lines#25, lw@, nlab@,
9540 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9542 # lines 25 columns 132 vb
9544 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
9548 # lines 42 columns 80
9550 wy325-42|wyse325-42|wyse-325 42 lines,
9551 lh@, lines#42, lw@, nlab@,
9552 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9554 # lines 42 columns 132
9556 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
9557 lh@, lines#42, lw@, nlab@,
9558 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9560 # lines 42 columns 132 vb
9562 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
9565 # lines 43 columns 80
9567 wy325-43|wyse325-43|wyse-325 43 lines,
9568 lh@, lines#43, lw@, nlab@,
9571 # lines 43 columns 132
9573 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
9574 lh@, lines#43, lw@, nlab@,
9575 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9577 # lines 43 columns 132 vb
9579 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
9582 # Wyse 370 -- 24 line screen with status line.
9584 # The terminal may have to be set for 8 data bits and 2 stop
9585 # bits for the arrow keys to work.
9587 # If you change keyboards the terminal will send different
9589 # The following definition is for the basic terminal without
9592 # <u0> -> enter Tektronix 4010/4014 mode
9593 # <u1> -> exit Tektronix 4010/4014 mode
9594 # <u2> -> enter ASCII mode (from any ANSI mode)
9595 # <u3> -> exit ASCII mode (goto native ANSI mode)
9596 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
9597 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
9599 # Bug: The <op> capability resets attributes.
9600 wy370-nk|wyse 370 without function keys,
9601 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
9602 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
9603 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9604 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9605 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9606 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9607 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9608 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9609 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
9610 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9611 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
9612 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
9613 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
9614 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
9615 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9617 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
9618 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
9619 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
9620 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
9622 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
9623 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
9624 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
9625 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9626 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
9627 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
9628 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9629 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9630 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9631 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
9632 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
9633 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
9635 # Function key set for the ASCII (wy-50 compatible) keyboard
9636 # This is the default 370.
9638 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
9639 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9640 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
9641 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9642 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
9643 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
9644 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
9645 knp=\E[U, kpp=\E[V, use=wy370-nk,
9647 # Function key set for the VT-320 (and wy85) compatible keyboard
9649 wy370-105k|Wyse 370 with 105 key keyboard,
9650 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9651 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9652 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9653 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
9654 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9655 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
9656 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
9657 use=wy370-nk, use=vt220+keypad,
9659 # Function key set for the PC compatible keyboard
9661 wy370-EPC|Wyse 370 with 102 key keyboard,
9662 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9663 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
9664 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9665 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9666 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9668 # Wyse 370 with visual bell.
9669 wy370-vb|Wyse 370 with visible bell,
9672 # Wyse 370 in 132-column mode.
9673 wy370-w|Wyse 370 in 132-column mode,
9675 rs2=\E[35h\E[?3h$<70>, use=wy370,
9677 # Wyse 370 in 132-column mode with visual bell.
9678 wy370-wvb|Wyse 370 with visible bell 132-columns,
9679 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9680 wy370-rv|Wyse 370 reverse video,
9681 rs3=\E[32h\E[?5h, use=wy370,
9683 # Wyse 99gt Tektronix 4010/4014 emulator,
9685 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
9688 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9689 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9691 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9693 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9694 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
9696 # Wyse 160 Tektronix 4010/4014 emulator,
9698 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
9699 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9700 home=^]8`g @\037, use=wy99gt-tek,
9702 # Wyse 370 Tektronix 4010/4014 emulator,
9704 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
9707 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9708 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
9710 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9712 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9713 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
9714 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
9716 # Vendor-supplied Wyse entries end here.
9719 #TITLE: TERMINFO ENTRY WY520
9721 # The WY520 terminfo is based on the WY285 entry published on the WYSE
9722 # BBS with the addition of more function keys and special keys.
9724 # rs1 -> set personality
9725 # rs2 -> set number of columns
9726 # rs3 -> set number of lines
9727 # is1 -> select the proper font
9728 # is2 -> do the initialization
9729 # is3 -> If this string is empty then rs3 gets sent.
9731 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9732 # - The BS key is programmed to generate BS in smcup since
9733 # is2 doesn't seem to work.
9734 # - Remove and shift/Remove: delete a character
9735 # - Insert : enter insert mode
9736 # - Find : delete to end of file
9737 # - Select : clear a line
9738 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9740 # - Bottom status line (host writable line) is used.
9741 # - smkx,rmkx are removed because this would put the numeric
9742 # keypad in Dec application mode which doesn't seem to work
9743 # with SCO applications.
9745 wy520|wyse520|wyse 520,
9746 am, hs, km, mc5i, mir, xenl, xon,
9747 cols#80, it#8, lines#24, wsl#80,
9748 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9749 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9750 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9751 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9752 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9753 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9754 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9755 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9756 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9757 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9758 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9759 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9760 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9761 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9762 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9763 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9764 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9765 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9766 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9767 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9768 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9769 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9770 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9771 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9772 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9773 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9774 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9775 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9776 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9777 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9778 vpa=\E[%i%p1%dd, use=vt220+keypad,
9780 # Wyse 520 with 24 data lines and status (terminal status)
9781 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9783 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9786 # Wyse 520 with visual bell.
9787 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9788 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9790 # Wyse 520 in 132-column mode.
9791 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9793 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9794 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9796 # Wyse 520 in 132-column mode with visual bell.
9797 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9798 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9801 # Wyse 520 emulating a vt420 7 bit mode.
9802 # The DEL key is programmed to generate BS in is2.
9803 # With EPC keyboard.
9804 # - 'End' key will clear till end of line on EPC keyboard
9805 # - Shift/End : ignored.
9806 # - Insert : enter insert mode.
9807 # - Delete : delete a character (have to change interrupt character
9808 # to CTRL-C: stty intr '^c') for it to work since the
9809 # Delete key sends 7FH.
9810 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9811 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9812 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9815 # Wyse 520 with 24 data lines and status (terminal status)
9816 # with EPC keyboard.
9817 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9819 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9822 # Wyse 520 with visual bell.
9823 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9824 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9826 # Wyse 520 in 132-column mode.
9827 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9829 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9830 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9832 # Wyse 520 in 132-column mode with visual bell.
9833 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9834 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9836 # Wyse 520 in 80-column, 36 lines
9837 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9840 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9843 # Wyse 520 in 80-column, 48 lines
9844 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9847 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9850 # Wyse 520 in 132-column, 36 lines
9851 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9854 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9857 # Wyse 520 in 132-column, 48 lines
9858 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9861 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9865 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9866 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9869 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9872 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9873 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9876 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9879 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9880 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9883 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9886 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9887 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9890 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9893 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9894 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9895 # file and we don't know what <hts> is -- esr)
9896 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9898 cols#80, it#8, lines#24,
9899 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9900 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9901 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9902 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9903 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9904 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9907 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9908 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9909 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9910 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9913 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9914 wy100q|Wyse 100 for Quotron,
9916 cols#80, lines#24, xmc#1,
9917 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9918 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9919 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9920 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9921 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9923 #### Kermit terminal emulations
9925 # Obsolete Kermit versions may be listed in the section describing obsolete
9926 # non-ANSI terminal emulators later in the file.
9929 # KERMIT standard all versions.
9930 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9931 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9932 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9933 kermit|standard kermit,
9936 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9937 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9938 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9939 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9940 kermit-am|standard kermit plus auto-margin,
9942 is2=K1 Standard Kermit plus Automatic Margins\n,
9945 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9946 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9948 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9949 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9952 clear=\EH\EJ, ed@, el@,
9953 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9955 # Cannot use line 25, now acts funny like ansi special scrolling region.
9956 # Initialization must escape from that region by cursor position to line 24.
9957 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9958 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9959 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9960 pckermit120|UCB IBMPC Kermit 1.20,
9962 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9964 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9965 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9966 # MS-DOS Kermit 2.27 for the IBMPC
9967 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9968 # Cannot use line 25, now acts funny like ansi special scrolling region.
9969 # Initialization must escape from that region by cursor position to line 24.
9970 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9971 # Reverse video for standout like H19.
9972 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9973 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9974 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9976 cols#80, it#8, lines#24,
9977 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9978 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9979 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9980 home=\EH, ht=^I, il1=\EL,
9981 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9982 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9983 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9984 # MS-DOS Kermit 2.27 with automatic margins
9985 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9986 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9988 cvvis=\EO\Eq\EG\EvK5,
9989 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9991 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9992 # Automatic margins now default. Use ansi <sgr> for highlights.
9993 # Define function keys.
9994 # (msk22714: removed obsolete ":kn#10:" -- esr)
9995 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9996 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9998 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9999 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
10000 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
10001 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
10002 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
10003 # This was designed for a VT320 emulator, but it is probably a good start
10004 # at support for the VT320 itself.
10005 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
10006 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
10007 vt320-k3|MS-Kermit 3.00's vt320 emulation,
10008 am, eslok, hs, km, mir, msgr, xenl,
10009 cols#80, it#8, lines#49, pb#9600, vt#3,
10010 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10011 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10012 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
10013 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10014 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10015 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10016 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10017 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
10018 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
10019 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10020 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10021 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
10022 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
10023 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10024 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
10025 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
10026 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
10027 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
10028 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
10029 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
10030 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10031 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
10032 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
10033 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
10034 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
10035 vt320-k311|dec vt320 series as defined by kermit 3.11,
10036 am, eslok, hs, mir, msgr, xenl, xon,
10037 cols#80, it#8, lines#24, vt#3,
10038 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10039 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10040 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
10041 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10042 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10043 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10044 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10045 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
10046 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
10047 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
10048 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
10049 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10050 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10051 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
10052 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
10053 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
10054 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
10055 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
10056 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
10057 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
10059 ######## NON-ANSI TERMINAL EMULATIONS
10064 # These entries attempt to describe Avatar, a terminal emulation used with
10065 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
10066 # capabilities, but with cheaper (shorter) control sequences. Messy design,
10067 # excessively dependent on PC idiosyncracies, but apparently rather popular
10068 # in the BBS world.
10070 # No color support. Avatar doesn't fit either of the Tektronix or HP color
10071 # models that terminfo knows about. An Avatar color attribute is the
10072 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
10074 # I wrote these entries while looking at the Avatar spec. I don't have
10075 # the facilities to test them. Let me know if they work, or don't.
10077 # Avatar escapes not used by these entries (because maybe you're smarter
10078 # and more motivated than I am and can figure out how to wrap terminfo
10079 # around some of them, and because they are weird enough to be funny):
10081 # ^L -- clear window/reset current attribute to default
10082 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
10084 # bit: 6 5 4 3 2 1 0
10086 # +---+---+ | +---+---+
10088 # | | foreground color
10089 # | foreground intensity
10092 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
10093 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
10094 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
10095 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
10096 # (^V^L and ^V^M set the current attribute as a side-effect.)
10097 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
10098 # in the pattern, <c> the number of times the pattern
10099 # should be repeated. If either value is 0, no-op.
10100 # The pattern can contain Avatar console codes,
10101 # including other ^V ^Y patterns.
10103 # ^V^O -- clockwise mode on; turn print direction right each time you
10104 # hit a window edge (yes, really). Turned off by CR
10106 # ^V^Q%c -- query the driver
10107 # ^V^R -- driver reset
10108 # ^V^S -- Sound tone (PC-specific)
10109 # ^V^T -- change highlight at current cursor poition to %c
10110 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
10111 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
10114 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10115 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
10116 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
10117 # which is the only method that will actually work for multiple highlights.)
10119 # Update by TD - 2004: half of this was inconsistent. Found documentation
10120 # and repaired most of the damage. sgr0 is probably incorrect, but the
10121 # available documentation gives no clues for a workable string.
10122 avatar0|avatar terminal emulator level 0,
10124 cols#80, it#8, lines#25,
10125 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
10126 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
10127 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
10129 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
10130 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
10132 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10133 avatar0+|avatar terminal emulator level 0+,
10134 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10135 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10136 avatar|avatar1|avatar terminal emulator level 1,
10137 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
10138 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10142 # RBComm is a lean and mean terminal emulator written by the Interrupt List
10143 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
10144 # '90s), especially in the BBS world, and still has some loyal users due to
10145 # its very small memory footprint and to a cute macro language.
10146 rbcomm|IBM PC with RBcomm and EMACS keybindings,
10147 am, bw, mir, msgr, xenl,
10148 cols#80, it#8, lines#25,
10149 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10150 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10151 cub1=^H, cud1=^C, cuf1=^B,
10152 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
10153 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
10154 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
10155 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
10156 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
10157 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
10158 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
10159 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
10160 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
10161 rbcomm-nam|IBM PC with RBcomm without autowrap,
10163 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10164 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
10165 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10166 rbcomm-w|IBM PC with RBcomm in 132 column mode,
10168 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10169 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
10170 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10172 ######## LCD DISPLAYS
10175 #### Matrix Orbital
10176 # from: Eric Z. Ayers (eric@ale.org)
10178 # Matrix Orbital 20x4 LCD display
10179 # Command Character is 0xFE (decimal 254, octal 376)
10181 # On this device, cursor addressability isn't possible. The LCD expects:
10182 # 0xfe G <col> <row>
10183 # for cup: %p1 == row and %p2 is column
10186 # cup=\376G%p2%c%p1%c
10187 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
10188 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10190 # Alas, there is no cursor upline capability on this display.
10192 # These entries add some 'sanity stuff' to the clear function. That is, it
10193 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
10194 # and turns off the cursor blinking and stuff like that.
10196 # NOTE: calling 'beep' turns on the backlight (bell)
10197 # NOTE: calling 'flash' turns it on and back off (visual bell)
10199 MtxOrb|Generic Matrix Orbital LCD display,
10200 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
10201 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
10202 flash=\376B\001$<200>\376F, home=\376H,
10203 MtxOrb204|20x4 Matrix Orbital LCD display,
10204 cols#20, lines#4, use=MtxOrb,
10205 MtxOrb162|16x2 Matrix Orbital LCD display,
10206 cols#16, lines#2, use=MtxOrb,
10209 ######## OLDER TERMINAL TYPES
10211 # This section is devoted to older commercial terminal brands that are now
10212 # discontinued, but known to be still in use or represented by emulations.
10215 #### AT&T (att, tty)
10217 # This section also includes Teletype-branded VDTs.
10219 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
10220 # Boundless Technologies); for details, see the header comment on the ADDS
10223 # These are AT&T's official terminfo entries. All-caps aliases have been
10226 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
10227 am, eo, mir, msgr, xon,
10228 cols#80, it#8, lines#24,
10229 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
10230 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10231 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10232 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10233 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10234 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10235 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10236 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
10237 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
10238 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
10239 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
10240 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10241 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
10243 att2350|AT&T 2350 Video Information Terminal 80 column mode,
10244 mc0@, mc4@, mc5@, use=att2300,
10246 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
10247 # Seems upward compatible with vt100, plus ins/del line/char.
10248 # On sgr, the protection parameter is ignored.
10249 # No check is made to make sure that only 3 parameters are output.
10250 # standout= reverse + half-intensity = 3 | 5.
10251 # bold= reverse + underline = 2 | 3.
10252 # note that half-bright blinking doesn't look different from normal blinking.
10253 # NOTE:you must program the function keys first, label second!
10254 # (att4410: a BSD entry has been seen with the following capabilities:
10255 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
10256 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
10257 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
10258 am, hs, mir, msgr, xon,
10259 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10260 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10261 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
10262 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
10263 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
10264 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
10265 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
10266 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
10267 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10268 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
10269 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
10270 ll=\E[24H, nel=^M^J,
10271 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
10272 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10273 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10275 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10276 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10277 tsl=\E7\E[25;%p1%{1}%+%dH,
10279 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
10281 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
10283 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
10285 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
10288 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
10290 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
10292 # 5410 in terms of a vt100
10293 # (v5410: added <rmam>/<smam> based on init string -- esr)
10294 v5410|att5410 in terms of a vt100,
10295 am, mir, msgr, xon,
10296 cols#80, it#8, lines#24, vt#3,
10297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10298 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10299 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10300 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
10301 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
10302 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
10303 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
10304 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10305 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
10306 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
10307 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10309 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
10310 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
10311 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10315 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
10316 # even! the 5420 has three modes: scroll, window or page mode
10317 # this terminfo should work in scroll or window mode, but doesn't
10318 # take advantage of any of the differences between them.
10320 # Has memory below (2 lines!)
10321 # 3 pages of memory (plus some spare)
10322 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
10323 # <hpa>, <hts> would work for these, but these work in both scroll and window
10324 # mode... Unset insert character so insert mode works
10325 # <is1> sets 80 column mode,
10326 # <is2> escape sequence:
10327 # 1) turn off all fonts
10328 # 2) function keys off, keyboard lock off, control display off,
10329 # insert mode off, erasure mode off,
10330 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
10331 # 4) reset origin mode
10332 # 5) set line wraparound
10333 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
10335 # 8) program ENTER to transmit ^J,
10336 # We use \212 to program the ^J because a bare ^J will get translated by
10337 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
10339 # <is3> set screen color to black,
10340 # No representation in terminfo for the delete word key: kdw1=\Ed
10341 # Key capabilities assume the power-up send sequence...
10342 # This <rmcup> is not strictly necessary, but it helps maximize
10343 # memory usefulness: <rmcup=\Ez>,
10344 # Alternate sgr0: <sgr0=\E[m\EW^O>,
10345 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
10346 # smkx programs the SYS PF keys to send a set sequence.
10347 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
10348 # This string causes them to send the strings <kf1>-<kf8>
10349 # when pressed in SYS PF mode.
10350 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
10351 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
10352 OTbs, db, mir, xon,
10353 lh#2, lm#78, lw#8, nlab#8, wsl#55,
10354 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
10355 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
10356 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
10357 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
10358 flash=\E[?5h$<200>\E[?5l, home=\E[x,
10359 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
10360 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
10361 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
10362 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
10363 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
10364 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10365 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10366 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10367 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
10368 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
10369 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
10370 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
10371 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
10372 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
10373 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
10374 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
10375 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
10376 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10379 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
10380 cols#132, lm#54, wsl#97,
10381 is1=\E[?3h$<100>, use=att4415,
10383 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
10384 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
10386 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
10387 cols#132, lm#54, wsl#97,
10388 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
10391 # Note that this mode permits programming USER PF KEYS and labels
10392 # However, when you program user pf labels you have to reselect
10393 # user pf keys to make them appear!
10394 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
10395 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
10396 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
10397 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
10399 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
10400 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10403 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
10404 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10407 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
10408 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10411 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
10412 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10415 att5420_2|AT&T 5420 model 2 80 cols,
10416 am, db, hs, mir, msgr, xon,
10417 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10418 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10419 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
10420 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10421 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
10422 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
10423 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10424 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
10425 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10426 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
10427 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10428 indn=\E[%p1%dE, invis=\E[8m,
10429 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10430 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
10431 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
10432 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
10433 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
10434 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10435 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10436 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
10437 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
10438 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
10439 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
10440 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
10441 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10443 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10444 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
10445 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10446 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10447 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
10449 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10452 att4418|att5418|AT&T 5418 80 cols,
10455 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10456 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
10457 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10458 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10459 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
10460 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
10461 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
10462 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
10463 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
10464 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
10465 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
10466 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
10467 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
10468 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
10469 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10470 att4418-w|att5418-w|AT&T 5418 132 cols,
10472 is1=\E[?3h, use=att5418,
10474 att4420|tty4420|teletype 4420,
10475 OTbs, da, db, eo, msgr, ul, xon,
10476 cols#80, lines#24, lm#72,
10477 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
10478 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
10479 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
10480 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
10481 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
10482 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
10483 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
10484 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
10486 # The following is a terminfo entry for the Teletype 4424
10487 # asynchronous keyboard-display terminal. It supports
10488 # the vi editor. The terminal must be set up as follows,
10490 # HIGHLIGHT DEFINITION 3-TONE
10491 # DISPLAY FUNCTION GROUP III
10493 # The second entry below provides limited (a la adm3a)
10494 # operation under GROUP II.
10496 # This must be used with DISPLAY FUNCTION GROUP I or III
10497 # and HIGHLIGHT DEFINITION 3-TONE
10498 # The terminal has either bold or blink, depending on options
10500 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
10501 att4424|tty4424|teletype 4424,
10504 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10505 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
10506 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10507 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
10508 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
10509 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
10510 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10511 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
10512 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10513 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10514 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
10516 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
10517 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
10520 att4424-1|tty4424-1|teletype 4424 in display function group I,
10521 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
10524 # This entry is not one of AT&T's official ones, it was translated from the
10525 # 4.4BSD termcap file. The highlight strings are different from att4424.
10526 # I have no idea why this is -- older firmware version, maybe?
10527 # The following two lines are the comment originally attached to the entry:
10528 # This entry appears to avoid the top line - I have no idea why.
10529 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
10530 att4424m|tty4424m|teletype 4424M,
10532 cols#80, it#8, lines#23,
10533 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10534 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
10535 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
10536 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10537 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
10538 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
10539 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10541 # The Teletype 5425 is really version 2 of the Teletype 5420. It
10542 # is quite similar, except for some minor differences. No page
10543 # mode, for example, so all of the <cup> sequences used above have
10544 # to change back to what's being used for the 5410. Many of the
10545 # option settings have changed their numbering as well.
10547 # This has been tested on a preliminary model.
10549 # (att5425: added <rmam>/<smam> based on the init string -- esr)
10550 att5425|tty5425|att4425|AT&T 4425/5425,
10551 am, da, db, hs, mir, msgr, xenl, xon,
10552 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10553 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10554 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10555 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
10556 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10557 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10558 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10559 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10560 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
10561 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
10562 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
10563 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10564 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
10565 invis=\E[8m, is1=\E<\E[?3l$<100>,
10566 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
10567 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10568 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10569 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
10570 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
10571 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
10572 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
10574 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10575 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
10576 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
10577 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
10578 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
10579 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
10580 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10581 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
10582 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
10583 vpa=\E[%p1%{1}%+%dd,
10585 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
10586 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
10588 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
10589 cols#132, lm#54, wsl#97,
10590 is1=\E[?3h$<100>, use=tty5425,
10592 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
10593 # I also added <rmam>/<smam> -- esr)
10594 att4426|tty4426|teletype 4426S,
10596 cols#80, lines#24, lm#48,
10597 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10598 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
10599 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
10600 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10601 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
10602 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
10603 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
10604 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
10605 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
10606 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10607 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
10608 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
10609 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
10610 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
10611 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
10612 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
10615 # Terminfo entry for the AT&T 510 A Personal Terminal
10616 # Function keys 9 - 16 are available only after the
10617 # screen labeled (soft keys/action blocks) are labeled. Function key
10618 # 9 corresponds to the leftmost touch target on the screen,
10619 # function key 16 corresponds to the rightmost.
10621 # This entry is based on one done by Ernie Rice at Summit, NJ and
10622 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
10623 att510a|bct510a|AT&T 510A Personal Terminal,
10624 am, mir, msgr, xenl, xon,
10625 cols#80, lh#2, lines#24, lw#7, nlab#8,
10626 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10627 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10628 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
10629 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10630 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10631 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
10632 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
10633 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
10634 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
10635 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
10636 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
10637 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
10638 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
10639 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
10640 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
10641 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10642 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
10643 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
10644 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
10645 smul=\E[4m, tbc=\E[3g,
10647 # Terminfo entry for the AT&T 510 D Personal Terminal
10648 # Function keys 9 through 16 are accessed by bringing up the
10650 # Function key 9 corresponds to the leftmost touch target on the screen,
10651 # function key 16 corresponds to the rightmost.
10653 # There are problems with soft key labeling. These are due to
10654 # strangenesses in the native terminal that are impossible to
10655 # describe in a terminfo.
10656 att510d|bct510d|AT&T 510D Personal Terminal,
10657 am, da, db, mir, msgr, xenl, xon,
10658 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
10659 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10660 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10661 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
10662 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10663 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10664 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
10665 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
10666 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
10667 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10668 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
10669 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
10670 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10671 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
10672 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
10673 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
10674 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
10675 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
10676 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10677 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10678 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
10679 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
10680 rs2=\E[5;0|, sc=\E7,
10681 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10682 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
10683 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
10684 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10686 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
10687 att500|att513|AT&T 513 using page mode,
10688 am, chts, mir, msgr, xenl, xon,
10689 cols#80, lh#2, lines#24, lw#8, nlab#8,
10690 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10691 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10692 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
10693 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10694 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10695 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10696 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
10697 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10698 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10699 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10700 indn=\E[%p1%dE, invis=\E[8m,
10701 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
10702 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10703 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10704 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
10705 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
10706 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
10707 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
10708 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
10709 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10710 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
10711 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10712 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
10713 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
10714 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10715 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10716 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
10717 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
10718 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
10720 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
10721 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
10722 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
10723 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10724 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10725 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10726 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10728 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10729 rs2=\E[5;0|, sc=\E7,
10730 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10731 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10732 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10733 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10736 # printer must be set to EMUL ANSI to accept ESC codes
10737 # <cuu1> stops at top margin
10738 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10739 # and alt font ascii,wrap on,tabs cleared
10740 # <is2> disables newline on LF,Emphasized off
10741 # The <u0> capability sets form length
10742 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10744 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10745 orhi#100, orl#12, orvi#72,
10746 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10748 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10749 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10750 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10751 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10753 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10754 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10755 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10756 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10758 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10759 # The following SET-UP modes are assumed for normal operation:
10760 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10761 # Other SET-UP modes may be set for operator convenience or communication
10762 # requirements. This termcap description is for the Resident Terminal Mode.
10763 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10764 # The BRL entry also said: UNSAFE :ll=\E[70H:
10765 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10767 cols#88, it#8, lines#70, vt#3,
10768 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10769 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10770 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10771 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10772 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10773 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10774 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10777 # 5620 terminfo (2.0 or later ROMS with char attributes)
10778 # The following SET-UP modes are assumed for normal operation:
10779 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10780 # Other SET-UP modes may be set for operator convenience or communication
10781 # requirements. This termcap description is for Resident Terminal Mode. No
10782 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10783 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10784 # Be aware that older versions of the dmd have a firmware bug that affects
10785 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10786 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10787 # also has <ll>=\E[70H commented out and marked unsafe.
10788 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10789 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10790 OTbs, am, msgr, npc, xon,
10791 cols#88, it#8, lines#70,
10792 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10793 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10794 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10795 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10796 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10797 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10798 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10799 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10800 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10801 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10802 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10803 lines#24, use=att5620,
10804 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10805 lines#34, use=att5620,
10806 # 5620 layer running the "S" system's downloaded graphics handler:
10807 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10809 cols#80, it#8, lines#72,
10810 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10811 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10812 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10813 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10816 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10818 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10819 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10820 att605|AT&T 605 80 column 102key keyboard,
10822 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10823 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10824 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10825 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10826 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10827 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10828 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10829 il1=\E[L, ind=^J, invis=\E[8m,
10830 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10831 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10832 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10833 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10834 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10835 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10836 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10837 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10838 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10839 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10840 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10841 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10842 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10843 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10844 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10845 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10846 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10847 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10848 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10849 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10850 tsl=\E7\E[25;%i%p1%dx,
10851 att605-pc|ATT 605 in pc term mode,
10852 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10853 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10854 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10855 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10856 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10857 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10858 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10859 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10860 xonc=e, use=att605,
10861 att605-w|AT&T 605-w 132 column 102 key keyboard,
10863 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10865 # (att610: I added <rmam>/<smam> based on the init string. I also
10866 # added <indn> and <rin> because the BSD file says the att615s have them,
10867 # and the 615 is like a 610 with a big keyboard, and most of their other
10868 # smart terminals support the same sequence -- esr)
10869 att610|AT&T 610; 80 column; 98key keyboard,
10870 am, eslok, hs, mir, msgr, xenl, xon,
10871 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10872 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10873 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10874 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10875 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10876 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10877 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10878 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10879 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10880 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10881 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10882 indn=\E[%p1%dS, invis=\E[8m,
10883 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10884 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10885 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10886 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10887 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10888 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10889 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10891 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10892 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10893 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10894 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10895 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10896 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10897 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10898 att610-w|AT&T 610; 132 column; 98key keyboard,
10900 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10903 att610-103k|AT&T 610; 80 column; 103key keyboard,
10904 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10905 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10906 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10907 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10908 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10909 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10910 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10911 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10912 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10913 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10914 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10915 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10916 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10917 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10919 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10921 att615|AT&T 615; 80 column; 98key keyboard,
10922 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10923 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10924 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10925 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10926 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10927 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10928 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10929 att615-w|AT&T 615; 132 column; 98key keyboard,
10930 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10931 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10932 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10933 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10934 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10935 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10936 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10937 att615-103k|AT&T 615; 80 column; 103key keyboard,
10938 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10939 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10940 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10941 # (att620: I added <rmam>/<smam> based on the init string and
10942 # <rin>/<indn> from a BSD termcap -- esr)
10943 att620|AT&T 620; 80 column; 98key keyboard,
10944 am, eslok, hs, mir, msgr, xenl, xon,
10945 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10946 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10947 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10948 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10949 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10950 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10951 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10952 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10953 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10954 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10955 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10956 indn=\E[%p1%dS, invis=\E[8m,
10957 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10958 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10959 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10960 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10961 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10962 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10963 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10964 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10965 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10966 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10967 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10968 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10969 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10970 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10971 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10972 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10973 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10974 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10975 rs2=\Ec\E[?3l, sc=\E7,
10976 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
10977 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10978 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10979 tsl=\E7\E[25;%i%p1%dx,
10980 att620-w|AT&T 620; 132 column; 98key keyboard,
10982 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10984 att620-103k|AT&T 620; 80 column; 103key keyboard,
10985 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10986 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10987 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10988 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10989 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10990 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10991 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10992 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10993 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10994 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10995 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10996 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10997 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10998 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10999 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
11000 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
11002 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
11004 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11007 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
11008 # The following SETUP modes are assumed for normal operation:
11009 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
11010 # Font_Size=Large Non-Layers_Window_Cols=80
11011 # Non-Layers_Window_Rows=60
11012 # Other SETUP modes may be set for operator convenience or communication
11013 # requirements. Some capabilities assume a printer attached to the Aux EIA
11014 # port. This termcap description is for the Fixed Non-Layers Window. No
11015 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11016 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
11017 att630|AT&T 630 windowing terminal,
11018 OTbs, am, da, db, mir, msgr, npc, xon,
11019 cols#80, it#8, lines#60, lm#0,
11020 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
11021 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11022 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11023 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
11024 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11025 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11026 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
11027 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11028 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
11029 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
11030 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
11031 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
11032 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
11033 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
11034 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
11035 rmul=\E[m, rs2=\Ec, sc=\E7,
11036 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
11037 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11038 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
11039 lines#24, use=att630,
11041 # This is the att700 entry for 700 native emulation of the AT&T 700
11042 # terminal. Comments are relative to changes from the 605V2 entry and
11043 # att730 on which the entry is based. Comments show the terminfo
11044 # capability name, termcap name, and description.
11046 # Here is what's going onm in the init string:
11047 # ESC [ 50;4| set 700 native mode (really is 605)
11048 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
11049 # ESC [ 53;0| set GenFlow to Xon/Xoff
11050 # ESC [ 8 ;0| set CR on NL
11051 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
11052 # ESC [ ? 4 l jump scroll
11053 # ESC [ ? 5 l/h video: normal (l); reverse (h)
11054 # ESC [ ?13 l Labels on
11055 # ESC [ ?15 l parity check = no
11056 # ESC [ 13 l monitor mode off
11057 # ESC [ 20 l LF on NL (not CRLF on NL)
11058 # ESC [ ? 7 h autowrap on
11059 # ESC [ 12 h local echo off
11060 # ESC ( B GO = ASCII
11061 # ESC ) 0 G1 = Special Char & Line Drawing
11062 # ESC [ ? 31 l Set 7 bit controls
11064 # Note: Most terminals, especially the 600 family use Reverse Video for
11065 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
11066 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
11067 # standout mode with \E[m (all normal attributes). The 730 entry simply
11068 # exits reverse video which would leave other current attributes intact. It
11069 # was assumed the 730 entry to be more correct so rmso has changed. The
11070 # 605V2 has no sequences to turn individual attributes off, thus its setting
11071 # and the rmso/smso settings from the 730.
11073 # Note: For the same reason as above in rmso I changed exit under-score mode
11074 # to specifically turn off underscore, rather than return to all normal
11077 # Note: The following pkey_xmit is taken from the 605V2 which contained the
11078 # capability as pfxl. It was changed here to pfx since pfxl
11079 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
11080 # allows strings to be parameters and label values must be programmed as
11081 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
11082 # and strings to be parameters. The 605V2 pfx entry should be examined later
11083 # in this regard. For reference the 730 pfxl entry is shown here for comparison
11085 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
11086 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
11089 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11092 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11094 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
11098 # modular 10 pin Connector
11099 # Left side Right side
11100 # Pin 1 2 3 4 5 6 7 8 9 10
11102 # Key (notch) at bottom
11114 # The manual is 189 pages and is loaded with details about the escape codes,
11115 # etc..... Available from AT&T CIC 800-432-6600...
11116 # ask for Document number 999-300-660..
11118 att700|AT&T 700 24x80 column display w/102key keyboard,
11119 am, eslok, hs, mir, msgr, xenl, xon,
11120 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11121 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11122 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11123 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11124 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11125 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11126 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11127 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11128 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11129 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
11130 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11131 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
11132 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
11133 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
11134 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11135 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
11136 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
11137 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
11138 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
11139 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
11140 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
11141 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
11142 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11143 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
11144 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11145 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
11146 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11147 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11148 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11149 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11150 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
11151 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
11152 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11153 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
11154 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
11155 tsl=\E7\E[99;%i%p1%dx,
11157 # This entry was modified 3/13/90 by JWE.
11158 # fixes include additions of <enacs>, correcting <rep>, and modification
11159 # of <kHOM>. (See comments below)
11160 # att730 has status line of 80 chars
11161 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
11162 # the <kf25> and up keys are used for shifted system Fkeys
11163 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
11164 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
11165 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
11166 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
11167 # 102, 102+1, or 122 key keyboards
11169 # (att730: I added <rmam>/<smam> based on the init string -- esr)
11170 att730|AT&T 730 windowing terminal,
11171 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
11172 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
11173 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11174 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11175 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11176 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11177 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11178 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11179 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11180 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11181 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11182 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
11183 ind=\ED, invis=\E[8m,
11184 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
11185 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11186 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11187 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11188 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
11189 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
11190 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
11191 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
11192 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
11193 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
11194 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
11195 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
11196 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11197 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
11198 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11199 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
11200 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
11201 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11202 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11203 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
11204 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
11205 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11206 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11207 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
11208 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
11209 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
11210 lines#41, use=att730,
11211 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
11212 lines#24, use=att730,
11213 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
11214 flash=\E[?5l$<200>\E[?5h,
11215 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
11217 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
11218 lines#41, use=att730r,
11219 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
11220 lines#24, use=att730r,
11222 # The following represents the screen layout along with the associated
11223 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
11224 # not appear on the screen but are shown to reference the bezel buttons.
11225 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
11226 # position relative to the screen.
11230 # +----------------------------------------------------------------+
11232 # XXXX | kf0 kf24 | XXXX
11235 # XXXX | kf1 kf23 | XXXX
11238 # XXXX | kf2 kf22 | XXXX
11241 # XXXX | kf3 kf21 | XXXX
11244 # XXXX | kf4 kf20 | XXXX
11247 # XXXX | kf5 kf19 | XXXX
11250 # XXXX | kf6 kf18 | XXXX
11256 # +----------------------------------------------------------------+
11258 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
11260 # Note: XXXX represents the screen buttons
11266 # The character string sent by key 'kf26' may be user programmable
11267 # to send either \E[16s, or \E[26s.
11268 # The character string sent by key 'krfr' may be user programmable
11269 # to send either \E[17s, or \E[27s.
11271 # Depression of the "CMD" key sends \E! (kcmd)
11272 # Depression of the "MAIL" key sends \E[26s (kf26)
11273 # "REDRAW" same as "REFRESH" (krfr)
11275 # "kf" functions adds carriage return to output string if terminal is in
11278 # The following are functions not covered in the table above:
11280 # Set keyboard character (SKC): \EPn1;Pn2w
11281 # Pn1= 0 Back Space key
11283 # Pn2= Program char (hex)
11285 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
11286 # Pn1= Window number (1-39)
11287 # Pn2-Pn5= Y;X;Y;X coordinates
11289 # Screen Selection (SSL): \E[Pnu
11290 # Pn= Window number
11292 # Set Terminal Modes (SM): \E[Pnh
11293 # Pn= 3 Graphics mode
11294 # Pn= > Cursor blink
11295 # Pn= < Enter new line mode
11296 # Pn= = Enter reverse insert/replace mode
11297 # Pn= ? Enter no scroll mode
11299 # Reset Terminal Mode (RM): \E[Pnl
11300 # Pn= 3 Exit graphics mode
11301 # Pn= > Exit cursor blink
11302 # Pn= < Exit new line mode
11303 # Pn= = Exit reverse insert/replace mode
11304 # Pn= ? Exit no scroll mode
11306 # Screen Status Report (SSR): \E[Pnp
11307 # Pn= 0 Request current window number
11308 # Pn= 1 Request current window dimensions
11310 # Device Status Report (DSR): \E[6n Request cursor position
11312 # Call Status Report (CSR): \E[Pnv
11313 # Pn= 0 Call failed
11314 # Pn= 1 Call successful
11316 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
11317 # Pn1= Button number to be loaded
11318 # Pn2= Character count of "string"
11319 # Pn3= Key mode being loaded:
11323 # String= Text string (15 chars max)
11325 # Screen Number Report (SNR): \E[Pnp
11326 # Pn= Screen number
11328 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
11329 # Pn1= Number of rows available in window
11330 # Pn2= Number of columns available in window
11332 # Cursor Position Report (CPR): \E[Pn1;Pn2R
11333 # Pn1= "Y" Position of cursor
11334 # Pn2= "X" Position of cursor
11336 # Request Answer Back (RAB): \E[c
11338 # Answer Back Response (ABR): \E[?;*;30;VSV
11339 # *= 0 No printer available
11340 # *= 2 Printer available
11341 # V= Software version number
11342 # SV= Software sub version number
11343 # (printer-available field not documented in v1)
11345 # Screen Alignment Aid: \En
11347 # Bell (lower pitch): \E[x
11349 # Dial Phone Number: \EPdstring\
11350 # string= Phone number to be dialed
11352 # Set Phone Labels: \EPpstring\
11353 # string= Label for phone buttons
11355 # Set Clock: \EPchour;minute;second\
11357 # Position Clock: \EPsY;X\
11358 # Y= "Y" coordinate
11359 # X= "X" coordinate
11361 # Delete Clock: \Epr\
11363 # Programming The Function Buttons: \EPfPn;string\
11364 # Pn= Button number (00-06, 18-24)
11365 # (kf00-kf06, kf18-kf24)
11366 # string= Text to sent on button depression
11368 # The following in version 2 only:
11370 # Request For Local Directory Data: \EPp12;\
11372 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
11374 # Request for Local Directory Data in print format: \EPp13;\
11376 # Enable 'Prt on Line' mode: \022 (DC2)
11378 # Disable 'Prt on Line' mode: \024 (DC4)
11382 # The following Terminfo entry describes functions which are supported by
11383 # the AT&T 5430/pt505 terminal software version 2 and later.
11384 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
11386 cols#80, it#8, lines#24,
11387 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11388 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
11389 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
11390 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11391 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11392 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11393 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
11394 il=\E[%p1%dL, il1=\E[L, ind=^J,
11395 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
11396 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11397 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
11398 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
11399 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
11400 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
11401 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
11402 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
11403 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
11404 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
11406 # The following Terminfo entry describes functions which are supported by
11407 # the AT&T 5430/pt505 terminal software version 1.
11408 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
11410 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
11411 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
11412 lines#22, use=att505,
11414 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
11415 # This cut mark helps make life less painful for people running ncurses tic
11416 # on machines with relatively little RAM. The file can be broken in half here
11417 # cleanly and compiled in sections -- no `use' references cross this cut
11421 #### Ampex (Dialogue)
11423 # Yes, these are the same people who are better-known for making audio- and
11424 # videotape. I'm told they are located in Redwood City, CA.
11427 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
11428 # (ampex80: some capabilities merged in from SCO's entry -- esr)
11429 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
11431 cols#80, it#8, lines#24,
11432 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
11433 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11434 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
11435 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
11436 smso=\Ej, smul=\El, tbc=\E3,
11437 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
11438 ampex175|ampex d175,
11441 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11442 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11443 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
11444 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
11445 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
11446 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
11447 # No backspace key in the main QWERTY cluster. Fortunately, it has a
11448 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
11449 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
11450 # mode), this key can be used as the erase key; I find I like this. Because
11451 # some people and some systems may not, there is another termcap ("ampex175")
11452 # that suppresses this little eccentricity by omitting the relevant capability.
11453 ampex175-b|ampex d175 using left arrow for erase,
11454 kbs=^_, use=ampex175,
11455 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
11456 # (ampex210: removed obsolete ":kn#10:" -- esr)
11457 ampex210|a210|ampex a210,
11458 OTbs, am, hs, xenl,
11459 cols#80, it#8, lines#24, xmc#1,
11460 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
11461 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11462 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
11463 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
11464 if=/usr/share/tabset/std, il1=\EE, invis@,
11465 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
11466 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
11467 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
11468 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
11469 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
11470 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
11471 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
11472 # and moved the padding to be *after* the caps -- esr)
11473 ampex219|ampex-219|amp219|Ampex with Automargins,
11475 cols#80, it#8, lines#24,
11476 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
11477 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
11478 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
11479 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
11480 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
11481 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
11482 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11483 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
11484 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
11485 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
11486 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
11487 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
11488 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
11489 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
11490 cols#132, lines#24,
11491 bel=^G, cr=^M, cud1=^J, ind=^J,
11492 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
11493 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
11494 ampex232|ampex-232|Ampex Model 232,
11496 cols#80, lines#24, xmc#1,
11497 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
11498 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11499 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
11500 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
11501 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
11502 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
11503 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
11504 kf9=^AI\r, khome=^^, use=adm+sgr,
11505 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
11506 ampex232w|Ampex Model 232 / 132 columns,
11507 cols#132, lines#24,
11508 is2=\E\034Eg\El, use=ampex232,
11510 #### Ann Arbor (aa)
11512 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
11513 # numbers of function keys. At least some used monitors in portrait mode,
11514 # allowing up to 76-character screen heights! They were reachable at:
11516 # Ann Arbor Terminals
11517 # 6175 Jackson Road
11518 # Ann Arbor, MI 48103
11521 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
11522 # can't be found on the Web; I fear they're long dead. R.I.P.
11526 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
11527 # Highly modified 6/22 by Mike O'Brien.
11528 # split out into several for the various screen sizes by dave-yost@rand
11529 # Modifications made 3/82 by Mark Horton
11530 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
11531 # status line moved to top of screen, <flash> removed 5/82
11532 # Some unknown person at SCO then hacked the init strings to make them more
11535 # assumes the following setup:
11536 # A menu: 0000 1010 0001 0000
11537 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11538 # C menu: 56 66 0 0 9600 0110 1100
11539 # D menu: 0110 1001 1 0
11541 # Briefly, the settings are for the following modes:
11542 # (values are for bit set/clear with * indicating our preference
11543 # and the value used to test these termcaps)
11544 # Note that many of these settings are irrelevent to the terminfo
11545 # and are just set to the default mode of the terminal as shipped
11548 # A menu: 0000 1010 0001 0000
11549 # Block/underline cursor*
11550 # blinking/nonblinking cursor*
11551 # key click/no key click*
11552 # bell/no bell at column 72*
11554 # key pad is cursor control*/key pad is numeric
11555 # return and line feed/return for <cr> key *
11556 # repeat after .5 sec*/no repeat
11557 # repeat at 25/15 chars per sec. *
11559 # hold data until pause pressed/process data unless pause pressed*
11560 # slow scroll/no slow scroll*
11561 # Hold in area/don't hold in area*
11562 # functions keys have default*/function keys disabled on powerup
11564 # show/don't show position of cursor during page transmit*
11569 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11570 # Baud rate (9600*)
11572 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
11573 # 1 stop bit*/2 stop bits
11574 # parity error detection off*/on
11576 # keyboard local/on line*
11577 # half/full duplex*
11578 # disable/do not disable keyboard after data transmission*
11580 # transmit entire page/stop transmission at cursor*
11581 # transfer/do not transfer protected characters*
11582 # transmit all characters/transmit only selected characters*
11583 # transmit all selected areas/transmit only 1 selected area*
11585 # transmit/do not transmit line separators to host*
11586 # transmit/do not transmit page tab stops tabs to host*
11587 # transmit/do not transmit column tab stop tabs to host*
11588 # transmit/do not transmit graphics control (underline,inverse..)*
11590 # enable*/disable auto XON/XOFF control
11591 # require/do not require receipt of a DC1 from host after each LF*
11592 # pause key acts as a meta key/pause key is pause*
11600 # XON character (17*)
11601 # XOFF character (19*)
11603 # C menu: 56 66 0 0 9600 0110 1100
11604 # number of lines to print data on (printer) (56*)
11606 # number of lines on a sheet of paper (printer) (66*)
11608 # left margin (printer) (0*)
11610 # number of pad chars on new line to printer (0*)
11612 # printer baud rate (9600*)
11614 # printer parity: 00=odd,01=even*,10=space,11=mark
11615 # printer stop bits: 2*/1
11616 # print/do not print guarded areas*
11618 # new line is: 01=LF,10=CR,11=CRLF*
11622 # D menu: 0110 1001 1 0
11623 # LF is newline/LF is down one line, same column*
11624 # wrap to preceding line if move left from col 1*/don't wrap
11625 # wrap to next line if move right from col 80*/don't wrap
11626 # backspace is/is not destructive*
11628 # display*/ignore DEL character
11629 # display will not/will scroll*
11630 # page/column tab stops*
11631 # erase everything*/erase unprotected only
11633 # editing extent: 0=display,1=line*,2=field,3=area
11638 annarbor4080|aa4080|ann arbor 4080,
11641 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
11642 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
11643 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
11644 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
11646 # Strange Ann Arbor terminal from BRL
11647 aas1901|Ann Arbor K4080 w/S1901 mod,
11650 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
11651 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
11654 # If you're using the GNU termcap library, add
11655 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
11656 # to these capabilities. This is the nonstandard GNU termcap scrolling
11657 # capability, arguments are:
11658 # 1. Total number of lines on the screen.
11659 # 2. Number of lines above desired scroll region.
11660 # 3. Number of lines below (outside of) desired scroll region.
11661 # 4. Total number of lines on the screen, the same as the first parameter.
11662 # The generic Ann Arbor entry is the only one that uses this.
11663 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
11664 OTbs, am, km, mc5i, mir, xon,
11666 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11667 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
11668 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
11669 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11670 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11671 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11672 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
11673 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
11674 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
11675 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11676 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
11677 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
11678 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
11679 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
11680 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
11681 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
11682 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
11683 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
11684 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
11685 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
11686 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11688 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
11689 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11690 vpa=\E[%p1%{1}%+%dd,
11692 aaa+rv|ann arbor ambassador in reverse video,
11693 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
11694 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11695 rs1=\E[H\E[7m\E[J$<156>,
11696 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
11697 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
11698 # Ambassador with the DEC option, for partial vt100 compatibility.
11699 aaa+dec|ann arbor ambassador in dec vt100 mode,
11700 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
11701 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
11702 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
11704 aaa-18|ann arbor ambassador/18 lines,
11706 is2=\E7\E[60;0;0;18p\E8,
11707 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
11709 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
11710 use=aaa+rv, use=aaa-18,
11711 aaa-20|ann arbor ambassador/20 lines,
11713 is2=\E7\E[60;0;0;20p\E8,
11714 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
11716 aaa-22|ann arbor ambassador/22 lines,
11718 is2=\E7\E[60;0;0;22p\E8,
11719 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
11721 aaa-24|ann arbor ambassador/24 lines,
11723 is2=\E7\E[60;0;0;24p\E8,
11724 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
11726 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11727 use=aaa+rv, use=aaa-24,
11728 aaa-26|ann arbor ambassador/26 lines,
11730 is2=\E7\E[60;0;0;26p\E8,
11731 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11732 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11733 aaa-28|ann arbor ambassador/28 lines,
11735 is2=\E7\E[60;0;0;28p\E8,
11736 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11737 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11738 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11741 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11742 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11743 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11744 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11745 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11746 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11747 use=aaa+rv, use=aaa-30-s,
11748 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11749 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11750 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11751 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11752 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11753 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11754 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11756 is2=\E7\E[60;0;0;30p\E8,
11757 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11758 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11759 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11760 use=aaa+rv, use=aaa-30,
11761 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11762 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11764 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11765 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11766 use=aaa+rv, use=aaa-30,
11767 aaa-36|ann arbor ambassador/36 lines,
11769 is2=\E7\E[60;0;0;36p\E8,
11770 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11771 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11772 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11773 use=aaa+rv, use=aaa-36,
11774 aaa-40|ann arbor ambassador/40 lines,
11776 is2=\E7\E[60;0;0;40p\E8,
11777 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11778 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11779 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11780 use=aaa+rv, use=aaa-40,
11781 aaa-48|ann arbor ambassador/48 lines,
11783 is2=\E7\E[60;0;0;48p\E8,
11784 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11785 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11786 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11787 use=aaa+rv, use=aaa-48,
11788 aaa-60-s|ann arbor ambassador/59 lines+status,
11791 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11792 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11793 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11794 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11795 use=aaa+rv, use=aaa-60-s,
11796 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11797 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11798 aaa-60|ann arbor ambassador/60 lines,
11800 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11802 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11803 use=aaa+rv, use=aaa-60,
11804 aaa-db|ann arbor ambassador 30/destructive backspace,
11806 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11808 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11810 flash=\E[>59h$<100>\E[>59l,
11811 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11812 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11813 guru+rv|guru changes for reverse video,
11814 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11815 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11816 use=guru+rv, use=guru-33,
11817 guru+s|guru status line,
11819 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11820 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11821 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11822 guru-nctxt|guru with no saved context,
11823 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11824 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11826 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11827 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11828 guru-24|ann arbor guru 24 lines,
11830 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11832 guru-44|ann arbor guru 44 lines,
11834 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11836 guru-44-s|ann arbor guru/44 lines+status,
11838 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11839 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11840 guru-76|guru with 76 lines by 89 cols,
11842 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11844 guru-76-s|ann arbor guru/76 lines+status,
11846 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11847 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11848 guru-76-lp|guru-lp|guru with page bigger than line printer,
11849 cols#134, lines#76,
11850 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11852 guru-76-w|guru 76 lines by 178 cols,
11853 cols#178, lines#76,
11854 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11856 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11857 cols#178, lines#75,
11858 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11859 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11860 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11861 cols#178, lines#76,
11862 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11864 aaa-rv-unk|ann arbor unknown type,
11865 lh#0, lw#0, nlab#0,
11866 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11867 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11869 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
11870 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11872 #### Applied Digital Data Systems (adds)
11874 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11875 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11876 # terminals was merged again. Then AT&T sold the terminal business to
11877 # SunRiver, which later changed its name to Boundless Technologies. The
11878 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11879 # as of early 1995) are at:
11881 # Boundless Technologies
11882 # 100 Marcus Boulevard
11883 # Hauppauge, NY 11788-3762
11884 # Vox: (800)-231-5445
11885 # Fax: (516)-342-7378
11886 # Web: http://boundless.com
11888 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11889 # In 1995 Boundless acquired DEC's terminals business.
11892 # Regent: lowest common denominator, works on all regents.
11893 # (regent: renamed ":bc:" to ":le:" -- esr)
11894 regent|Adds Regent Series,
11897 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11898 home=\EY\s\s, ind=^J, ll=^A,
11899 # Regent 100 has a bug where if computer sends escape when user is holding
11900 # down shift key it gets confused, so we avoid escape.
11901 regent100|Adds Regent 100,
11904 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11905 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11906 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11907 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11908 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11909 regent20|Adds Regent 20,
11910 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11912 regent25|Adds Regent 25,
11913 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11915 regent40|Adds Regent 40,
11917 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11918 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11919 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11920 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11921 smul=\E0`, use=regent25,
11922 regent40+|Adds Regent 40+,
11923 is2=\EB, use=regent40,
11924 regent60|regent200|Adds Regent 60,
11925 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11926 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11928 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11929 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11930 viewpoint|addsviewpoint|adds viewpoint,
11933 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11934 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11935 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11936 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11937 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11938 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11939 # Some viewpoints have bad ROMs that foo up on ^O
11940 screwpoint|adds viewpoint with ^O bug,
11941 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11943 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11944 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11945 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11946 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11947 # invis=01000100 and %c is the logical or of desired attributes.
11948 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11950 # Update by TD - 2004:
11952 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11954 # COMMANDS ASCII CODE
11956 # Address, Absolute ESC,=,row,column
11958 # Aux Port Enable ESC,@
11959 # Aux Port Disable ESC,A
11963 # Cursor forward FF
11966 # Cursor supress ETB
11967 # Cursor enable CAN
11968 # Erase to end of line ESC,T
11969 # Erase to end of page ESC,Y
11972 # Keyboard unlock SO
11973 # Read current cursor position ESC,?
11974 # Set Attribute ESC,0,x (see below for values of x)
11975 # Tag bit reset ESC,(
11976 # Tag bit set ESC,)
11977 # Transparent Print on ESC,3
11978 # Transparent Print off ESC,4
11984 # Half Intensity A 0101
11986 # Half Intensity Blinking C 0103
11987 # Reverse Video P 0120
11988 # Reverse Video Half Intensity Q 0121
11989 # Reverse Video Blinking R 0122
11990 # Reverse Video Half Intensity
11992 # Underlined ` 0140
11993 # Underlined Half Intensity a 0141
11994 # Underlined Blinking b 0142
11995 # Underlined Half Intensity
11997 # Video suppress D 0104
11998 vp3a+|viewpoint3a+|adds viewpoint 3a+,
12000 cols#80, it#8, lines#24,
12001 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
12002 cub1=^H, cud1=^J, cuf1=^L,
12003 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
12004 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
12005 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
12006 nel=^M^J, rev=\E0P\E), rmso=\E(,
12007 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
12008 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
12009 vp60|viewpoint60|addsvp60|adds viewpoint60,
12012 # adds viewpoint 90 - from cornell
12013 # Note: emacs sends ei occasionally to insure the terminal is out of
12014 # insert mode. This unfortunately puts the viewpoint90 IN insert
12015 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
12016 # - :ei=:im=: must be present in the termcap translation.)
12017 # - <xhp> indicates glitch that attributes stick to location
12018 # - <msgr> means it's safe to move in standout mode
12019 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
12021 # Function key and label capabilities merged in from SCO.
12022 vp90|viewpoint90|adds viewpoint 90,
12023 OTbs, bw, msgr, xhp,
12025 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
12026 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
12027 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
12028 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
12029 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
12030 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12031 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
12032 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
12033 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
12034 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
12035 # Note: if return acts weird on a980, check internal switch #2
12036 # on the top chip on the CONTROL pc board.
12037 adds980|a980|adds consul 980,
12040 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
12041 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
12042 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
12043 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
12044 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
12046 #### C. Itoh Electronics
12048 # As of 1995 these people no longer make terminals (they're still in the
12049 # printer business). Their terminals were all clones of the DEC VT series.
12050 # They're located in Orange County, CA.
12053 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
12054 # the delay times and do an auto tab set rather than the indirect
12055 # file used in vt100.
12056 cit80|cit-80|citoh 80,
12059 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
12060 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
12061 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12062 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
12063 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
12064 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
12065 cit101|citc|C.itoh fast vt100,
12068 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
12069 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12070 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
12071 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
12072 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
12073 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12074 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
12075 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
12077 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
12078 # The following termcap entry was created from the Callan cd100 entry. The
12079 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
12080 # full selection of combinations of reverse video, underline, and blink.
12081 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
12082 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
12083 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
12084 cit101e|C. Itoh CIT-101e,
12085 OTbs, OTpt, am, mir, msgr,
12086 cols#80, it#8, lines#24,
12087 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
12088 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
12089 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
12090 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
12091 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
12092 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
12093 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
12094 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
12095 smkx=\E=, smso=\E[7m, smul=\E[4m,
12096 # From: David S. Lawyer, June 1997:
12097 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
12098 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
12099 # late 1980's CIT Terminals went out of business.
12100 # There is no need to use the initialization string is=... (by invoking
12101 # tset or setterm etc.) provided that the terminal has been manually set
12102 # up (and the setup saved with ^S) to be compatible with this termcap. To be
12103 # compatible it should be in ANSI mode (not VT52). A set-up that
12104 # works is to set all the manually setable stuff to factory defaults
12105 # by pressing ^D in set-up mode. Then increse the brighness with the
12106 # up-arrow key since the factory default will likely be dim on an old
12107 # terminal. Then change any options you want (provided that they are
12108 # compatible with the termcap). For my terminal I set: Screen
12109 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
12110 # on. I also set up mine for parity (but you may not need it). Then
12111 # save the setup with ^S.
12112 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
12113 cit101e-rv|Citoh CIT-101e (sets reverse video),
12114 am, eo, mir, msgr, xenl, xon,
12115 cols#80, it#8, lines#24,
12116 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12117 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
12118 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12119 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12120 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12121 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12122 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
12123 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12124 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
12125 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
12126 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12127 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
12128 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
12129 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
12130 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
12131 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
12132 u7=\E[6n, u8=\E[?6c, u9=\E[c,
12133 cit101e-n|CIT-101e w/o am,
12135 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12137 cit101e-132|CIT-101e with 132 cols,
12139 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
12140 cit101e-n132|CIT-101e with 132 cols w/o am,
12143 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12145 # CIE Terminals CIT-500 from BRL
12146 # The following SET-UP modes are assumed for normal operation:
12147 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
12148 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
12149 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
12150 # Other SET-UP modes may be set for operator convenience or communication
12152 # Hardware tabs are assumed to be set every 8 columns; they can be set up
12153 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
12154 # "stty ixon -ixany" to enable DC3/DC1 flow control!
12155 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
12156 cit500|CIE Terminals CIT-500,
12157 OTbs, OTpt, mir, msgr, xon,
12158 OTkn#10, cols#80, it#8, lines#64, vt#3,
12159 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12160 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
12161 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12162 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12163 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12164 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
12165 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
12166 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
12167 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
12168 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
12169 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
12170 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
12171 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
12172 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
12173 rmso=\E[m, rmul=\E[m,
12174 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
12175 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
12176 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12178 # C. Itoh printers begin here
12179 citoh|ci8510|8510|c.itoh 8510a,
12182 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
12183 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
12185 citoh-pica|citoh in pica,
12186 is1=\EN, use=citoh,
12187 citoh-elite|citoh in elite,
12190 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
12192 citoh-comp|citoh in compressed,
12195 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
12197 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
12198 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
12200 is1=\EP, use=citoh,
12201 citoh-6lpi|citoh in 6 lines per inch mode,
12202 is3=\EA, use=citoh,
12203 citoh-8lpi|citoh in 8 lines per inch mode,
12205 is3=\EB, use=citoh,
12207 #### Control Data (cdc)
12210 cdc456|cdc 456 terminal,
12213 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12214 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
12215 el=^V, home=^Y, il1=\EL, ind=^J,
12217 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
12221 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12222 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12223 kcuu1=^W, khome=^Y,
12224 cdc721ll|CDC Vikingll,
12226 cols#132, lines#24,
12227 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12228 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12229 kcuu1=^W, khome=^Y,
12230 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
12234 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12235 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
12236 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
12238 # The following switch/key settings are assumed for normal operation:
12239 # 96 chars SCROLL FULL duplex not BLOCK
12240 # Other switches may be set according to communication requirements.
12241 # Insert/delete-character cannot be used, as the whole display is affected.
12242 # "so" & "se" are commented out until jove handles "sg" correctly.
12245 OTkn#10, cols#80, lines#24,
12246 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12247 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
12248 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
12249 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
12250 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
12251 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
12252 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
12253 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
12254 rs1=\031\030\002\003\017,
12256 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
12258 # Part of the long initialization string defines the "DOWN" key to the left
12259 # of the tab key to send an ESC. The real ESC key is positioned way out
12262 # The termcap won't work in 132 column mode due to the way it it moves the
12263 # cursor. Termcap doesn't have the capability (as far as I could tell) to
12264 # handle the 721 in 132 column mode.
12266 # (cdc721: changed :ri: to :sr: -- esr)
12267 cdc721-esc|Control Data 721,
12268 OTbs, OTpt, am, bw, msgr, xon,
12269 OTkn#10, cols#80, it#8, lines#30,
12270 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
12271 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
12272 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
12273 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
12274 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
12275 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
12276 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
12277 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
12278 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
12279 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
12280 smso=^^D, smul=^\, tbc=^^^RY,
12284 # Getronics is a Dutch electronics company that at one time was called
12285 # `Geveke' and made async terminals; but (according to the company itself!)
12286 # they've lost all their documentation on the command set. The hardware
12287 # documentation suggests the terminals were actually manufactured by a
12288 # Taiwanese electronics company named Cal-Comp. There are known
12289 # to have been at least two models, the 33 and the 50.
12292 # The 50 seems to be a top end vt220 clone, with the addition of a higher
12293 # screen resolution, a larger screen, at least 1 page of memory above and
12294 # below the screen, apparently pages of memory right and left of the screen
12295 # which can be panned, and about 75 function keys (15 function keys x normal,
12296 # shift, control, func A, func B). It also has more setup possibilities than
12297 # the vt220. The monitor case is dated November 1978 and the keyboard case is
12300 # The vt100 emulation works as is. The entry below describes the rather
12301 # non-conformant (but more featureful) ANSI mode.
12303 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
12304 visa50|geveke visa 50 terminal in ansi 80 character mode,
12307 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
12308 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
12309 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12310 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12311 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12312 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
12313 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
12314 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12315 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
12316 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
12317 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
12318 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
12319 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
12320 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
12321 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
12322 lf3=A insert line, lf4=A delete line, lf5=A clear,
12323 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
12324 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
12325 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
12326 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
12327 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
12330 #### Human Designed Systems (Concept)
12332 # Human Designed Systems
12334 # King of Prussia, PA 19406
12335 # Vox: (610)-277-8300
12336 # Fax: (610)-275-5739
12337 # Net: support@hds.com
12339 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
12340 # the character-terminal business now (1995) and making X terminals. In
12341 # particular, the whole `Concept' line described here was discontinued long
12345 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
12346 # Extensive changes to c108 by arpavax:eric Feb 1982
12347 # Some unknown person at SCO then translated it to terminfo.
12349 # There seem to be a number of different versions of the C108 PROMS
12350 # (with bug fixes in its Z-80 program).
12352 # The first one that we had would lock out the keyboard of you
12353 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
12354 # Try that on your C108 and see if it sends a ^S when you type it.
12355 # If so, you have an old version of the PROMs.
12357 # You should configure the C108 to send ^S/^Q before running this.
12358 # It is much faster (at 9600 baud) than the c100 because the delays
12360 # new status line display entries for c108-8p:
12361 # <is3> - init str #3 - setup term for status display -
12362 # set programmer mode, select window 2, define window at last
12363 # line of memory, set bkgnd stat mesg there, select window 0.
12365 # <tsl> - to status line - select window 2, home cursor, erase to
12366 # end-of-window, 1/2 bright on, goto(line#0, col#?)
12368 # <fsl> - from status line - 1/2 bright off, select window 0
12370 # <dsl> - disable status display - set bkgnd status mesg with
12373 # There are probably more function keys that should be added but
12374 # I don't know what they are.
12376 # No delays needed on c108 because of ^S/^Q handshaking
12378 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
12379 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
12380 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
12381 c108-4p|concept108-4p|concept 108 w/4 pages,
12382 OTbs, eslok, hs, xon,
12384 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
12385 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
12386 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
12387 ind=^J, is1=\EK\E!\E F,
12388 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
12389 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
12390 smcup=\EU\Ev 8p\Ep\r\E\025,
12391 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
12392 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
12393 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
12395 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
12396 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
12398 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
12400 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
12401 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
12404 # These have only window relative cursor addressing, not screen
12405 # relative. To get it to work right here, smcup/rmcup (which
12406 # were invented for the concept) lock you into a one page
12407 # window for screen style programs.
12409 # To get out of the one page window, we use a clever trick:
12410 # we set the window size to zero ("\Ev " in rmcup) which the
12411 # terminal recognizes as an error and resets the window to all
12414 # This trick works on c100 but does not on c108, sigh.
12416 # Some tty drivers use cr3 for concept, others use nl3, hence
12417 # the delays on cr and ind below. This padding is only needed at
12418 # 9600 baud and up. One or the other is commented out depending on
12419 # local conventions.
12421 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
12422 # less than 6 but more than 2 will work.
12424 # Note: can't use function keys f7-f10 because they are
12425 # indistinguishable from arrow keys (!), also, del char and
12426 # clear eol use xon/xoff so they probably won't work very well.
12428 # Also note that we don't define insrt/del char/delline/eop/send
12429 # because they don't transmit unless we reset them - I figured
12430 # it was a bad idea to clobber their definitions.
12432 # The <mc5> sequence changes the escape character to ^^ so that
12433 # escapes will be passed through to the printer. Only trouble
12434 # is that ^^ won't be - ^^ was chosen to be unlikely.
12435 # Unfortunately, if you're sending raster bits through to be
12436 # plotted, any character you choose will be likely, so we lose.
12438 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
12439 # cannot be # in is2 because it will hang a c100 with no printer
12441 c100|concept100|concept|c104|c100-4p|hds concept 100,
12442 OTbs, am, eo, mir, ul, xenl,
12443 cols#80, lines#24, pb#9600, vt#8,
12444 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
12445 cub1=^H, cud1=^J, cuf1=\E=,
12446 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
12447 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
12448 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
12449 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
12451 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
12452 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
12453 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
12454 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
12455 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
12456 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
12457 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
12458 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
12459 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
12460 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
12461 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
12462 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
12463 smso=\ED, smul=\EG,
12464 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
12465 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
12466 smso=\EE, use=c100,
12467 oc100|oconcept|c100-1p|old 1 page concept 100,
12471 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
12472 # Lots of notes, originally inline, but ncurses doesn't grok that.
12474 # am: not available in power on mode, but turned on with \E[=107;207h in
12475 # is2=. Also, \E=124l in is2= could have been used to prevent needing
12476 # to specify xenl:, but that would have rendered the last space on the
12477 # last line useless.
12478 # bw: Not available in power on mode, but turned on with \E[=107;207h in
12480 # clear: Could be done with \E[2J alone, except that vi (and probably most
12481 # other programs) assume that this also homes the cursor.
12482 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
12483 # scroll the window, and go back to window 1.
12484 # is2: the string may cause a warning to be issued by tic that it
12485 # found a very long line and that it suspects that a comma is missing
12486 # somewhere. This warning can be ignored (unless it comes up more than
12487 # once). The initialization string contains the following commands:
12489 # [Setup mode items changed from factory defaults:]
12490 # \E)0 set alternate character set to
12492 # ^O set character set to default
12493 # [In case it wasn't]
12494 # \E[m turn off all attributes
12495 # [In case they weren't off]
12496 # \E[=107; cursor wrap and
12497 # 207h character wrap on
12498 # \E[90;3u set Fkey definitions to "transmit"
12500 # \E[92;3u set cursor key definitions to
12501 # "transmit" defaults
12502 # \E[43;1u set shift F13 to transmit...
12504 # \E[44;1u set shift F14 to transmit...
12506 # \E[45;1u set shift F15 to transmit...
12508 # \E[46;1u set shift F16 to transmit...
12510 # \E[200;1u set shift up to transmit...
12512 # \E[201;1u set shift down to transmit...
12514 # \E[202;1u set shift right to transmit...
12516 # \E[203;1u set shift left to transmit...
12518 # \E[204;1u set shift home to transmit...
12520 # \E[212;1u set backtab to transmit...
12522 # \E[213;1u set shift backspace to transmit...
12524 # \E[214;1u set shift del to transmit...
12526 # [Necessary items not mentioned in setup mode:]
12527 # \E[2!w move to window 2
12528 # \E[25;25w define window as line 25 of memory
12529 # \E[!w move to window 1
12530 # \E[2*w show current line of window 2 as
12532 # \E[2+x set meta key to use high bit
12533 # \E[;3+} move underline to bottom of character
12535 # All Fkeys are set to their default transmit definitions with \E[90;3u
12536 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
12537 # setting MUST be redefined or deactivated, because the default is
12538 # contained in almost all of this terminal's Fkey strings! If for some
12539 # reason "quit" cannot be altered, the Fkeys can, but it would be
12540 # necessary to change ^| to ^] in all of these definitions, and add
12541 # \E[2;029!t to is2.
12542 # lines: is set to 24 because this terminal refuses to treat the 25th
12544 # ll: Not available in power on mode, but turned on with \E[=107;207h in
12546 # lm: Pointless, given that this definition locks a single screen of
12547 # memory into view, but what the hey...
12548 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
12549 # other attributes alone), but some programs expect this to turn off
12551 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
12552 # attributes alone), but some programs expect this to turn off
12554 # sgr: Attributes are set on this terminal with the string \E[ followed by
12555 # a list of attribute code numbers (in decimal, separated by
12556 # semicolons), followed by the character m. The attribute code
12559 # 2 for dim (which is ignored in power on mode);
12563 # 8 for not displayable; and
12564 # =99 for protected (except that there are strange side
12565 # effects to protected characters which make them inadvisable).
12566 # The mapping of terminfo parameters to attributes is as follows:
12567 # %p1 (standout) = bold and inverse together;
12568 # %p2 (underline) = underline;
12569 # %p3 (reverse) = inverse;
12570 # %p4 (blink) = blinking;
12571 # %p5 (dim) is ignored;
12572 # %p6 (bold) = bold;
12573 # %p7 (invisible) = not displayable;
12574 # %p8 (protected) is ignored; and
12575 # %p9 (alt char set) = alt char set.
12576 # The code to do this is:
12578 # %?%p1%p6%O IF (standout; bold) OR
12579 # %t;1 THEN OUTPUT ;1
12581 # %?%p2 IF underline
12582 # %t;4 THEN OUTPUT ;4
12585 # %t;5 THEN OUTPUT ;5
12587 # %?%p1%p3%O IF (standout; reverse) OR
12588 # %t;7 THEN OUTPUT ;7
12590 # %?%p7 IF invisible
12591 # %t;8 THEN OUTPUT ;8
12594 # %?%p9 IF altcharset
12595 # %t^N THEN OUTPUT ^N
12596 # %e^O ELSE OUTPUT ^O
12598 # sgr0: Everything is turned off (including alternate character set), since
12599 # there is no way of knowing what it is that the program wants turned
12601 # smul: The "underline" attribute is reconfigurable to an overline or
12602 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
12603 # bottom of the character cell. This was done to allow for more readable
12604 # underlined characters, and to be able to distinguish between an
12605 # underlined space, an underscore, and an underlined underscore.
12606 # xenl: Terminal can be configured to not need this, but this "glitch"
12607 # behavior is actually preferable with autowrap terminals.
12609 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
12610 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
12611 # string modifies the 'O' in kf43 to kf46 to a '$'.
12613 # kcbt was originally ^I but redefined in is2=.
12614 # kHOM was \E[H originally but redefined in is2=, as were a number of
12616 # kDC was originally \177 but redefined in is2=.
12618 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
12619 # tsl: Go to window 2, then do an hpa=.
12621 #------- flash=\E[8;3!}^G\E[3;3!}
12622 #------- flash=\E[?5h$<100>\E[?5l
12623 # There are two ways to flash the screen, both of which have their drawbacks.
12624 # The first is to set the bell mode to video, transmit a bell character, and
12625 # set the bell mode back - but to what? There is no way of knowing what the
12626 # user's old bell setting was before we messed with it. Worse, the command to
12627 # set the bell mode also sets the key click volume, and there is no way to say
12628 # "leave that alone", or to know what it's set to, either.
12629 # The second way to do a flash is to set the screen to inverse video, pad for a
12630 # tenth of a second, and set it back - but like before, there's no way to know
12631 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
12632 # it that way. The point is moot anyway, since vi (and probably other
12633 # programs) assume that by defining flash=, you want the computer to use it
12634 # INSTEAD of bel=, rather than as a secondary type of signal.
12636 #------- cvvis=\E[+{
12637 # The is the power on setting, which is also as visible as the cursor
12639 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
12640 # Windowing is possible, but not defined here because it is also used to
12641 # emulate status line functions. Allowing a program to set a window could
12642 # clobber the status line or render it unusable. There is additional memory,
12643 # but screen scroll functions are destructive and do not make use of it.
12645 #------- dim= Not available in power on mode.
12646 # You have a choice of defining low intensity characters as "half bright" and
12647 # high intensity as "normal", or defining low as "normal" and high as "bold".
12648 # No matter which you choose, only one of either "half bright" or "bold" is
12649 # available at any time, so taking the time to override the default is
12652 #------- prot=\E[=0;99m
12653 # Not defined, because it appears to have some strange side effects.
12654 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12655 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12656 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
12657 # Available, but making them available to programs is inadvisable.
12658 # The code to do this is:
12659 # %?%p1%{24}%< IF ((key; 24) <;
12660 # %p1%{30}%> ((key; 30) >;
12661 # %p1%{54}%< (key; 54) <
12664 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
12665 # %t\E[ THEN OUTPUT \E[
12666 # %p1%d OUTPUT (key) as decimal
12667 # [next line applies to pfx only]
12671 # %p2%s OUTPUT (string) as string
12673 # [DEL chosen as delimiter, but could be any character]
12674 # [implied: ELSE do nothing]
12678 # Not defined since anything it might do could be done faster and easier with
12679 # either Meta-Shift-Reset or the main power switch.
12681 #------- smkx=\E[1!z
12682 #------- rmkx=\E[!z
12683 # These sequences apply to the cursor and setup keys only, not to the
12684 # numeric keypad. But it doesn't matter anyway, since making these
12685 # available to programs is inadvisable.
12686 # For the key definitions below, all sequences beginning with \E$ are
12687 # custom and programmed into the terminal via is2. \E$ also has no
12688 # meaning to any other terminal.
12690 #------- cmdch=\E[;%p1%d!t
12691 # Available, but making it available to programs is inadvisable.
12692 #------- smxon=\E[1*q
12693 # Available, but making it available to programs is inadvisable.
12694 # Terminal will send XON/XOFF on buffer overflow.
12695 #------- rmxon=\E[*q
12696 # Available, but making it available to programs is inadvisable.
12697 # Terminal will not notify on buffer overflow.
12698 #------- smm=\E[2+x
12700 # Available, but making them available to programs is inadvisable.
12703 # It's not made clear in the manuals, but based on other ansi/vt type
12704 # terminals, it's a good guess that this terminal is capable of both
12705 # "transparent print" (which doesn't copy data to the screen, and
12706 # therefore needs mc5i: specified to say so) and "auxilliary print"
12707 # (which does duplicate printed data on the screen, in which case mc4=
12708 # and mc5= should use the \E[?4i and \E[?5i strings instead).
12710 hds200|Human Designed Systems HDS200,
12711 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
12712 cols#80, it#8, lines#24, lm#0,
12713 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12714 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
12715 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
12716 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12717 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12718 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12719 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12720 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
12721 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12722 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12724 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
12725 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
12726 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12727 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12728 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12729 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12730 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12731 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12732 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12733 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12734 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12735 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12736 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12737 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12738 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12739 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12740 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
12741 rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
12742 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12743 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12744 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12745 vpa=\E[%i%p1%dd, use=ansi+pp,
12747 # <ht> through <el> included to specify padding needed in raw mode.
12748 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12749 avt-ns|concept avt no status line,
12750 OTbs, am, eo, mir, ul, xenl, xon,
12751 cols#80, it#8, lines#24, lm#192,
12752 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12753 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12754 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12755 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12756 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12757 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12758 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12759 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12760 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12761 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12762 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12763 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12764 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12765 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12766 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12767 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12768 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12769 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12770 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12772 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
12773 sgr0=\E[m\016$<1>, smacs=\017$<1>,
12774 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
12775 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12776 vpa=\E[%p1%{1}%+%dd,
12777 avt-rv-ns|concept avt in reverse video mode/no status line,
12778 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12780 avt-w-ns|concept avt in 132 column mode/no status line,
12781 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12783 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12784 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12785 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12787 # Concept AVT with status line. We get the status line using the
12788 # "Background status line" feature of the terminal. We swipe the
12789 # first line of memory in window 2 for the status line, keeping
12790 # 191 lines of memory and 24 screen lines for regular use.
12791 # The first line is used instead of the last so that this works
12792 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12793 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12795 avt+s|concept avt status line changes,
12798 dsl=\E[0*w, fsl=\E[1;1!w,
12799 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12800 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12801 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12802 avt|avt-s|concept-avt|avt w/80 columns,
12803 use=avt+s, use=avt-ns,
12804 avt-rv|avt-rv-s|avt reverse video w/sl,
12805 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12806 use=avt+s, use=avt-ns,
12807 avt-w|avt-w-s|concept avt 132 cols+status,
12808 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12809 use=avt+s, use=avt-ns,
12810 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12811 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12812 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12814 #### Contel Business Systems.
12817 # Contel c300 and c320 terminals.
12818 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12820 cols#80, lines#24, xmc#1,
12821 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12822 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12823 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12824 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12825 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12826 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12827 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12828 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12829 # Contel c301 and c321 terminals.
12830 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12831 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12834 #### Data General (dg)
12836 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12837 # the terminals group at Data General was shut down in 1991; all these
12838 # terminals have thus been discontinued.
12840 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12841 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12842 # sequentially, first the unmodified key codes are listed as F1 through F15.
12843 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12844 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12845 # F46 through F60. This is done in the private "includes" below whose names
12846 # start with "dgkeys+".
12848 # DG terminals generally support 8 bit characters. For each of these terminals
12849 # two descriptions are supplied:
12850 # 1) A default description for 8 bits/character communications, which
12851 # uses the default DG international character set and keyboard codes.
12852 # 2) A description with suffix "-7b" for 7 bits/character communications.
12853 # This description must use the NON-DEFAULT native keyboard language.
12855 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12856 # Ctrl/Shift fdkeys (kf34-kf44).
12858 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12859 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12860 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12861 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12862 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12863 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12864 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12865 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12866 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12867 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12868 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12869 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12870 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12871 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12872 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12873 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12874 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12875 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12876 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12877 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12878 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12879 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12880 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12881 khome=\233H, kprt=\233i,
12883 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12884 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12885 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12886 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12887 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12888 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12889 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12890 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12891 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12892 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12893 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12894 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12895 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12896 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12897 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12898 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12899 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12900 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12901 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12903 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12904 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12905 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12906 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12907 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12908 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12909 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12910 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12911 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12912 kf8=^^x, kf9=^^y, khome=^H,
12914 dgkeys+15|Private entry describing 15 DG mode special keys,
12915 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12916 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12917 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12918 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12919 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12920 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12921 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12922 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12923 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12924 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12925 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12928 # Data General color terminals use the "Tektronix" color model. The total
12929 # number of colors varies with the terminal model, as does support for
12930 # attributes used in conjunction with color.
12932 # Removed u7, u8 definitions since they conflict with tack:
12933 # Preserve user-defined colors in at least some cases.
12935 # Default is ACM mode.
12936 # u8=^^F}20^^Fi^^F}21,
12938 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12940 colors#16, ncv#53, pairs#256,
12942 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12943 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12944 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12946 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12949 # Video attributes are coordinated using static variables set by "sgr", then
12950 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12951 # (D=dim, U=underline, B=blink, R=reverse.)
12952 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12954 colors#8, ncv#16, pairs#64,
12955 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12956 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12957 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12958 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12959 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12961 dg+color|Color info for Data General D470C terminals in ANSI mode,
12962 colors#16, ncv#53, pairs#256,
12963 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12964 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12965 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12966 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12969 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12971 colors#8, ncv#16, pairs#64,
12973 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12974 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12975 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12977 dgmode+color|Color info for Data General D470C terminals in DG mode,
12978 colors#16, pairs#256,
12979 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12980 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12983 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12985 colors#52, ncv#53, pairs#26,
12986 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
12987 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12988 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12989 scp=\036RG2%p1%02X,
12991 # Colors are in the order: normal, reverse, dim, dim + reverse.
12992 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
12994 colors#52, ncv#53, pairs#26,
12995 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
12996 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
12997 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
12998 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
13000 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
13001 # Initialization string 1 sets:
13002 # ^R - vertical scrolling enabled
13003 # ^C - blinking enabled
13004 dg-generic|Generic Data General terminal in DG mode,
13007 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13008 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
13009 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
13010 smul=^T, use=dgkeys+11,
13012 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
13013 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
13014 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
13015 # maybe they were originally nuls (which would fit).
13017 dg200|data general dasher 200,
13020 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13021 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
13022 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
13023 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
13024 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
13027 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
13028 dg210|dg-ansi|Data General 210/211,
13031 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
13032 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13033 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13034 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
13035 smso=\E[7;m, smul=\E[4;m,
13036 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
13037 # courtesy of Carlos Rucalde of Vantage Software, Inc.
13038 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
13039 # I suspect the d200 function keys actually work on the dg211, check it out.)
13040 dg211|Data General d211,
13041 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
13042 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
13043 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
13045 # dg450 from Cornell (not official)
13046 dg450|dg6134|data general 6134,
13047 cub1@, cuf1=^X, use=dg200,
13050 # Note: lesser Dasher terminals will not work with vi because vi insists upon
13051 # having a command to move straight down from any position on the bottom line
13052 # and scroll the screen up, or a direct vertical scroll command. The 460 and
13053 # above have both, the D210/211, for instance, has neither. We must use ANSI
13054 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
13055 # backspace on all terminals. This is not so in DG mode.
13056 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
13057 # grounds that there is no matching ":ml:"
13058 dg460-ansi|Data General Dasher 460 in ANSI-mode,
13059 OTbs, am, msgr, ul,
13060 cols#80, it#8, lines#24,
13061 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
13062 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
13063 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13064 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
13065 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13066 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
13067 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
13068 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
13069 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
13070 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
13071 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
13072 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
13073 u7=\E[6n, u8=\E[5n, u9=\E[0n,
13074 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
13075 # Data General 605x
13076 # Ought to work for a Model 6242, Type D210 as well as a 605x.
13077 # Note that the cursor-down key transmits ^Z. Job control users, beware!
13078 # This also matches a posted description of something called a `Dasher 100'
13079 # so there's a dg100 alias here.
13080 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
13081 dg6053-old|dg100|data general 6053,
13084 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
13085 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
13086 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
13087 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
13088 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
13089 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
13092 # (Some performance can be gained over the generic DG terminal type)
13093 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
13095 home=^P\0\0, ll=^P\0^W, use=dg-generic,
13097 # Like 6053, but adds reverse video and more keypad and function keys.
13098 d200|d200-dg|Data General DASHER D200,
13099 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
13100 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
13101 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
13104 # DASHER D210 series terminals in ANSI mode.
13105 # Reverse video, no insert/delete character/line, 7 bits/character only.
13107 # Initialization string 1 sets:
13108 # <0 - scrolling enabled
13109 # <1 - blink enabled
13110 # <4 - print characters regardless of attributes
13111 d210|d214|Data General DASHER D210 series,
13114 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
13115 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13116 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13117 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
13118 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
13119 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13120 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
13121 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
13123 # DASHER D210 series terminals in DG mode.
13124 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
13125 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
13127 ed=^^FF, use=d200-dg,
13129 # DASHER D211 series terminals in ANSI mode.
13130 # Like the D210, but with 8-bit characters and local printer support.
13132 # Initialization string 2 sets:
13134 # 2;1 - 8 bit operations
13135 # 1;1 - 8 bit (international) keyboard language
13136 # \E(B - default primary character set (U.S. ASCII)
13137 # \E)4 - default secondary character set (international)
13138 # ^O - primary character set
13140 d211|d215|Data General DASHER D211 series,
13142 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
13145 # Initialization string 2 sets:
13147 # 2;0 - 7 bit operations
13148 # 1;0 - 7 bit (native) keyboard language
13149 # \E(0 - default character set (the keyboard native language)
13150 # ^O - primary character set
13151 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
13153 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
13155 # Like the D210 series, but adds support for 8-bit characters.
13157 # Reset string 2 sets:
13158 # ^^N - secondary character set
13159 # ^^FS0> - 8 bit international character set
13160 # ^^O - primary character set
13161 # ^^FS00 - default character set (matching the native keyboard language)
13163 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
13165 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
13167 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
13170 # Enhanced DG mode with changes to be more UNIX compatible.
13171 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
13174 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
13175 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
13176 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
13177 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
13178 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
13179 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
13180 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
13181 rs2=\036N\036FS0E\036O\036FS00,
13182 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13183 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
13184 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
13185 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
13187 is3=\036Fz2, use=d216+,
13189 d217-unix|Data General DASHER D217 in DG-UNIX mode,
13191 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
13194 # DASHER D220 color terminal in ANSI mode.
13195 # Like the D470C but with fewer colors and screen editing features.
13197 # Initialization string 1 sets:
13199 # <0 - scrolling enabled
13200 # <1 - blink enabled
13201 # <4 - print characters regardless of attributes
13202 # \E[m - all attributes off
13203 # Reset string 1 sets:
13204 # \Ec - initial mode defaults (RIS)
13206 d220|Data General DASHER D220,
13208 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13209 use=dg+color8, use=d470c,
13211 d220-7b|Data General DASHER D220 in 7 bit mode,
13213 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13214 use=dg+color8, use=d470c-7b,
13216 # Initialization string 3 sets:
13217 # - default cursor (solid rectangle)
13218 # Reset string 2 sets:
13219 # ^^N - secondary character set
13220 # ^^FS0> - 8 bit international character set
13221 # ^^O - primary character set
13222 # ^^FS00 - default character set (matching the native keyboard language)
13224 d220-dg|Data General DASHER D220 color terminal in DG mode,
13226 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
13227 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
13230 # DASHER D230C color terminal in ANSI mode.
13231 # Like the D220 but with minor ANSI compatibility improvements.
13233 d230c|d230|Data General DASHER D230C,
13234 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
13235 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
13236 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
13237 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
13238 smul=\E[4;50m, use=dgkeys+7b, use=d220,
13240 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
13243 # DASHER D400/D450 series terminals.
13244 # These add intelligent features like insert/delete to the D200 series.
13246 # Initialization string 2 sets:
13247 # ^^FQ2 - default cursor (solid rectangle)
13248 # ^^FW - character protection disabled
13249 # ^^FJ - normal (80 column) mode
13250 # ^^F\^ - horizontal scrolling enabled (for alignment)
13251 # ^^FX004? - margins at columns 0 and 79
13252 # ^^F] - horizontal scrolling disabled
13253 # ^^O - primary character set
13254 # ^^FS00 - default character set (the keyboard native language)
13255 # - (should reset scrolling regions, but that glitches the screen)
13256 # Reset string 1 sets:
13257 # ^^FA - all terminal defaults except scroll rate
13258 # Reset string 2 sets:
13259 # ^^F] - horizontal scrolling disabled
13260 # ^^FT0 - jump scrolling
13262 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
13264 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
13265 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
13266 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
13267 ich1=^^J, il1=^^FH,
13268 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
13269 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
13270 rs1=^^FA, rs2=\036F]\036FT0,
13271 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
13272 sgr0=\017\025\035\036E\036O, smacs=^^N,
13273 vpa=\020\177%p1%c, use=d210-dg,
13275 # DASHER D410/D460 series terminals in ANSI mode.
13276 # These add a large number of intelligent terminal features.
13278 # Initialization string 1 sets:
13280 # <0 - scrolling enabled
13281 # <1 - blink enabled
13282 # <2 - horizontal scrolling enabled (for alignment)
13283 # <4 - print characters regardless of attributes
13284 # \E[5;0v - normal (80 column) mode
13285 # \E[1;1;80w - margins at columns 1 and 80
13287 # 1 - print all characters even if protected
13288 # 6 - character protection disabled
13289 # <2 - horizontal scrolling disabled
13290 # - (should reset scrolling regions, but that glitches the screen)
13292 # Initialization string 2 sets:
13294 # 3;2 - default cursor (solid rectangle)
13295 # 2;1 - 8 bit operations
13296 # 1;1 - international keyboard language
13297 # \E(B - default primary character set (U.S. ASCII)
13298 # \E)4 - default secondary character set (international)
13299 # ^O - primary character set
13301 # Reset string 1 sets:
13302 # \Ec - initial mode defaults (RIS)
13303 # \E[<2h - horizontal scrolling disabled
13305 # Reset string 2 sets:
13307 # 4;0 - jump scrolling
13308 # 2;1 - 8 bit operations
13309 # 1;1 - 8 bit (international) keyboard language
13310 # \E(B - default primary character set (U.S. ASCII)
13311 # \E)4 - default secondary character set (international)
13313 d410|d411|d460|d461|Data General DASHER D410/D460 series,
13315 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
13316 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13317 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
13318 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
13319 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
13320 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
13321 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
13322 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
13323 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
13325 # Initialization string 2 sets:
13327 # 3;2 - default cursor (solid rectangle)
13328 # 2;0 - 7 bit operations
13329 # 1;0 - 7 bit (native) keyboard language
13330 # \E(0 - default character set (the keyboard native language)
13331 # ^O - primary character set
13333 # Reset string 2 sets:
13335 # 4;0 - jump scrolling
13336 # 2;0 - 7 bit operations
13337 # 1;0 - 7 bit (native) keyboard language
13338 # \E(0 - default character set (the keyboard native language)
13340 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
13342 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
13343 rs2=\E[4;0;2;0;1;0v\E(0,
13344 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
13345 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
13347 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
13349 enacs@, rmacs=\036FS00,
13350 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13351 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
13354 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
13356 # Initialization string 1 sets:
13358 # <0 - scrolling enabled
13359 # <1 - blink enabled
13360 # <2 - horizontal scrolling enabled (for alignment)
13361 # <4 - print characters regardless of attributes
13362 # \E[5;1v - compressed (135 column) mode
13363 # \E[1;1;126 - margins at columns 1 and 126
13365 # 1 - print all characters even if protected
13366 # 6 - character protection disabled
13367 # <2 - horizontal scrolling disabled
13368 # - (should reset scrolling regions, but that glitches the screen)
13370 # Reset string 1 sets:
13371 # \Ec - initial mode defaults (RIS)
13372 # \E[5;1v - compressed (135 column) mode
13373 # \E[1;1;126w - margins at columns 1 and 126
13374 # \E[<2h - horizontal scrolling disabled
13376 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
13378 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13379 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
13381 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
13383 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13384 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
13386 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
13389 # These add intelligent features like scrolling regions.
13390 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
13391 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
13392 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
13393 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
13394 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
13395 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
13396 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
13397 vpa=\036FPFF%p1%2.2X,
13398 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13400 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
13402 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
13403 rs2=\036P@1\036FK\036FX0083,
13404 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
13406 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
13409 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13411 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
13413 clear=\036FG\036PH, fsl=\036F}01\022,
13414 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
13415 tsl=\036F}00\036FP%p1%2.2X18\036PG,
13416 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
13419 # Relative cursor motions are confined to the current window,
13420 # which is not what the scrolling region specification expects.
13421 # Thus, relative vertical cursor positioning must be deleted.
13422 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
13423 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
13424 cud1@, cuu1@, ll@, use=d462+,
13426 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
13428 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
13430 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
13432 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
13434 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
13437 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
13439 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
13441 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
13443 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
13445 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
13448 d430c-dg|d430-dg|Data General D430C in DG mode,
13449 use=d413-dg, use=dg+fixed,
13450 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
13451 use=d413-dg, use=dg+ccc,
13453 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
13454 use=d413-unix, use=dgunix+fixed,
13455 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
13456 use=d413-unix-w, use=dgunix+fixed,
13457 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
13458 use=d413-unix-25, use=dgunix+fixed,
13459 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
13460 use=d413-unix-s, use=dgunix+fixed,
13461 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
13462 use=d413-unix-sr, use=dgunix+fixed,
13463 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
13464 use=d413-unix, use=dgunix+ccc,
13465 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
13466 use=d413-unix-w, use=dgunix+ccc,
13467 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
13468 use=d413-unix-25, use=dgunix+ccc,
13469 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
13470 use=d413-unix-s, use=dgunix+ccc,
13471 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
13472 use=d413-unix-sr, use=dgunix+ccc,
13474 # DASHER D470C color terminal in ANSI mode.
13475 # Like the D460 but with 16 colors and without a compressed mode.
13477 # Initialization string 1 sets:
13479 # <0 - scrolling enabled
13480 # <1 - blink enabled
13481 # <2 - horizontal scrolling enabled (for alignment)
13482 # <4 - print characters regardless of attributes
13483 # \E[1;1;80w - margins at columns 1 and 80
13485 # 1 - print all characters even if protected
13486 # 6 - character protection disabled
13487 # <2 - horizontal scrolling disabled
13488 # - (should reset scrolling regions, but that glitches the screen)
13490 d470c|d470|Data General DASHER D470C,
13491 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13492 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
13493 use=dg+color, use=d460,
13495 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
13496 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13497 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
13498 use=dg+color, use=d460-7b,
13500 # Initialization string 2 sets:
13501 # ^^FQ2 - default cursor (solid rectangle)
13502 # ^^FW - character protection disabled
13503 # ^^F\^ - horizontal scrolling enabled (for alignment)
13504 # ^^FX004? - margins at columns 0 and 79
13505 # ^^F] - horizontal scrolling disabled
13506 # ^^O - primary character set
13507 # ^^FS00 - default character set (the keyboard native language)
13508 # - (should reset scrolling regions, but that glitches the screen)
13510 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
13511 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
13512 use=dgmode+color, use=d460-dg,
13514 # DASHER D555 terminal in ANSI mode.
13515 # Like a D411, but has an integrated phone.
13516 d555|Data General DASHER D555,
13518 d555-7b|Data General DASHER D555 in 7-bit mode,
13520 d555-w|Data General DASHER D555 in wide mode,
13522 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
13524 d555-dg|Data General DASHER D555 series in DG mode,
13527 # DASHER D577 terminal in ANSI mode.
13528 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
13529 d577|Data General DASHER D577,
13531 d577-7b|Data General DASHER D577 in 7-bit mode,
13533 d577-w|Data General DASHER D577 in wide mode,
13535 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
13538 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
13541 # DASHER D578 terminal.
13542 # Like a D577, but without compressed mode; like a D470C in this respect.
13544 # Initialization string 1 sets:
13546 # <0 - scrolling enabled
13547 # <1 - blink enabled
13548 # <2 - horizontal scrolling enabled (for alignment)
13549 # <4 - print characters regardless of attributes
13550 # \E[1;1;80w - margins at columns 1 and 80
13552 # 1 - print all characters even if protected
13553 # 6 - character protection disabled
13554 # <2 - horizontal scrolling disabled
13555 # - (should reset scrolling regions, but that glitches the screen)
13557 d578|Data General DASHER D578,
13558 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
13559 d578-7b|Data General DASHER D578 in 7-bit mode,
13560 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
13562 #### Datamedia (dm)
13564 # Datamedia was headquartered in Nashua, New Hampshire until it went
13565 # out of business in 1993, but the ID plates on the terminals referred
13566 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
13567 # manufacturer which threw out all information about the terminals.
13570 cs10|colorscan|Datamedia Color Scan 10,
13573 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13574 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13575 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13576 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
13577 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13578 cs10-w|Datamedia Color Scan 10 with 132 columns,
13580 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
13582 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
13583 dm1520|dm1521|datamedia 1520,
13585 cols#80, it#8, lines#24,
13586 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
13587 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13588 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
13590 # dm2500: this terminal has both <ich> and <smir>. Applications using
13591 # termcap/terminfo directly (rather than through ncurses) might be confused.
13592 dm2500|datamedia2500|datamedia 2500,
13595 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
13596 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
13597 dch1=\020\010\030\035$<10*>,
13598 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
13599 ich1=\020\034\030\035$<10*>,
13600 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
13601 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
13602 smdc=^P, smir=^P, smso=^N,
13603 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
13604 # also, has a meta-key.
13605 # From: <goldberger@su-csli.arpa>
13606 # (dmchat: ":MT:" changed to ":km:" -- esr)
13607 dmchat|dmchat version of datamedia 2500,
13609 dl1=\020\032\030\035$<2/>,
13610 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
13611 # (dm3025: ":MT:" changed to ":km:" -- esr)
13612 dm3025|datamedia 3025a,
13614 cols#80, it#8, lines#24,
13615 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13616 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
13617 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
13618 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
13619 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
13620 smir=\EP, smso=\EO1,
13621 dm3045|datamedia 3045a,
13622 OTbs, am, eo, km@, ul, xenl,
13623 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
13624 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
13625 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
13626 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
13628 # Datamedia DT80 soft switches:
13629 # 1 0=Jump 1=Smooth
13630 # Autorepeat 0=off 1=on
13631 # Screen 0=Dark 1=light
13632 # Cursor 0=u/l 1=block
13634 # 2 Margin Bell 0=off 1=on
13635 # Keyclick 0=off 1=on
13636 # Ansi/VT52 0=VT52 1=Ansi
13637 # Xon/Xoff 0=Off 1=On
13639 # 3 Shift3 0=Hash 1=UK Pound
13641 # Newline 0=Off 1=On
13642 # Interlace 0=Off 1=On
13644 # 4 Parity 0=Odd 1=Even
13645 # Parity 0=Off 1=On
13646 # Bits/Char 0=7 1=8
13647 # Power 0=60Hz 1=50Hz
13649 # 5 Line Interface 0=EIA 1=Loop
13650 # Aux Interface 0=EIA 1=Loop
13651 # Local Copy 0=Off 1=On
13654 # 6 Aux Parity 0=Odd 1=Even
13655 # Aux Parity 0=Off 1=On
13656 # Aux Bits/Char 0=7 1=8
13657 # CRT Saver 0=Off 1=On
13658 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
13659 dm80|dmdt80|dt80|datamedia dt80/1,
13660 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
13661 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13662 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
13663 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13665 # except in 132 column mode, where it needs a little padding.
13666 # This is still less padding than the vt100, and you can always turn on
13667 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
13669 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
13671 clear=\E[H\E[2J$<50/>, cud1=^J,
13672 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
13673 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
13674 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
13675 dt80-sas|Datamedia DT803/DTX for SAS usage,
13678 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
13679 bel=^G, clear=^L, cr=^M,
13680 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
13681 cub1=^H, cud1=\EB, cuf1=^\,
13682 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
13683 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
13684 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
13685 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
13686 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
13687 smso=\E$2\004, tbc=\E'0,
13689 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
13690 # These aren't end-all Excel termcaps; but do insert/delete char/line
13691 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
13692 # The naming convention has been bent somewhat, with the use of E? (where
13693 # E is for 'Excel') as # a name. This was done to distinguish the entries
13694 # from the other Datamedias in use here, and yet to associate a model of
13695 # the Excel terminals with the regular datamedia terminals that share
13696 # major characteristics.
13697 excel62|excel64|datamedia Excel 62,
13698 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13699 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13701 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
13702 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13703 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13705 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
13706 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
13707 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
13708 smir=\E[4h, use=dt80,
13712 # Falco Data Products
13713 # 440 Potrero Avenue
13714 # Sunnyvale, CA 940864-196
13715 # Vox: (800)-325-2648
13716 # Fax: (408)-745-7860
13717 # Net: techsup@charm.sys.falco.com
13719 # Current Falco models as of 1995 are generally ANSI-compatible and support
13720 # emulations of DEC VT-series, Wyse, and Televideo types.
13723 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
13724 # This terminal was released around 1983 and was discontinued long ago.
13725 # The standout and underline highlights are the same.
13726 falco|ts1|ts-1|falco ts-1,
13728 cols#80, it#8, lines#24,
13729 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13730 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13731 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13732 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13733 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13734 smir=\Eq, smso=\Eg1, smul=\Eg1,
13735 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13736 OTbs, am, da, db, mir, msgr, ul,
13737 cols#80, it#8, lines#24,
13738 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13739 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13740 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13741 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13742 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13743 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13744 smso=\Eg4, smul=\Eg1,
13745 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13746 ts100|ts100-sp|falco ts100-sp,
13747 am, mir, msgr, xenl, xon,
13748 cols#80, it#8, lines#24, vt#3,
13749 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13750 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13751 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13752 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13753 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13754 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13755 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13756 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13757 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13758 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13759 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13760 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13761 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13762 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13763 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13764 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13766 ts100-ctxt|falco ts-100 saving context,
13767 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13769 #### Florida Computer Graphics
13772 # Florida Computer Graphics Beacon System, using terminal emulator program
13773 # "host.com", as provided by FCG. This description is for an early release
13774 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13777 # From: David Bryant <cbosg!djb> 1/7/83
13778 beacon|FCG Beacon System,
13781 bel=\ESTART\r\E37\r\EEND\r$<1>,
13782 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13783 cub1=^H, cud1=^J, cuf1=\EV,
13784 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13785 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13786 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13787 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13788 rmul=\ESTART\r\E60\,0\r\EEND\r,
13789 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13790 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13791 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13792 smul=\ESTART\r\E60\,1\r\EEND\r,
13797 # The f1720a differences from ANSI: no auto margin, destructive
13798 # tabs, # of lines, funny highlighting and underlining
13799 f1720|f1720a|fluke 1720A,
13801 cols#80, lines#16, xmc#1,
13802 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13803 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13804 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13805 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13806 smso=\E[7m, smul=\E[4m,
13808 #### Liberty Electronics (Freedom)
13810 # Liberty Electronics
13811 # 48089 Fremont Blvd
13813 # Vox: (510)-623-6000
13814 # Fax: (510)-623-7021
13816 # From: <faletti@berkeley.edu>
13817 # (f100: added empty <acsc> to suppress a tic warning;
13818 # made this relative to adm+sgr -- note that <invis> isn't
13819 # known to work for f100 but does on the f110. --esr)
13820 f100|freedom|freedom100|freedom model 100,
13821 OTbs, am, bw, hs, mir, msgr, xon,
13823 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13824 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13825 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13826 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13827 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13828 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13829 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13830 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13831 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13832 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13833 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13834 f100-rv|freedom-rv|freedom 100 in reverse video,
13835 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13836 # The f110 and f200 have problems with vi(1). They use the ^V
13837 # code for the down cursor key. When kcud1 is defined in terminfo
13838 # as ^V, the Control Character Quoting capability (^V in insert mode)
13839 # is lost! It cannot be remapped in vi because it is necessary to enter
13840 # a ^V to to quote the ^V that is being remapped!!!
13842 # f110/f200 users will have to decide whether
13843 # to lose the down cursor key or the quoting capability. We will opt
13844 # initially for leaving the quoting capability out, since use of VI
13845 # is not generally applicable to most interactive applications
13846 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13847 f110|freedom110|Liberty Freedom 110,
13850 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13851 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13852 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13853 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13854 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13855 smso=\EG<, tsl=\Ef, use=f100,
13856 f110-14|Liberty Freedom 110 14inch,
13858 f110-w|Liberty Freedom 110 - 132 cols,
13859 cols#132, use=f110,
13860 f110-14w|Liberty Freedom 110 14in/132 cols,
13863 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13864 f200|freedom200|Liberty Freedom 200,
13865 OTbs, am, eslok, hs, mir, msgr, xon,
13866 cols#80, it#8, lines#24, wsl#80,
13867 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13868 clear=^Z, cnorm=\E.1, cr=^M,
13869 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13870 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13871 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13872 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13873 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13874 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13875 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13876 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13877 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13878 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13879 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13880 f200-w|Liberty Freedom 200 - 132 cols,
13881 cols#132, use=f200,
13882 # The f200 has the ability to reprogram the down cursor key. The key is
13883 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13884 # so powering the terminal off and on will not cause the change to be lost.
13885 f200vi|Liberty Freedom 200 for vi,
13886 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13887 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13888 cols#132, use=f200vi,
13892 # Graphon Corporation
13893 # 544 Division Street
13894 # Campbell, CA 95008
13895 # Vox: (408)-370-4080
13896 # Fax: (408)-370-5047
13897 # Net: troy@graphon.com (Troy Morrison)
13900 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13901 # including one odd hybrid that starts out life on power-up as a character
13902 # terminal, than can be switched to X graphics mode (driven over the serial
13903 # line) by an escape sequence. No info on this beast yet.
13904 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13905 go140|graphon go-140,
13907 cols#80, it#8, lines#24,
13908 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
13909 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13910 ed=\E[J$<10/>, el=\E[K, ht=^I,
13911 if=/usr/share/tabset/vt100, il1=\E[L,
13912 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13913 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13914 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13915 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13916 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13917 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13918 go140w|graphon go-140 in 132 column mode,
13921 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13923 # Hacked up vt200 termcap to handle GO-225/VT220
13924 # From: <edm@nwnexus.WA.COM>
13925 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13926 go225|go-225|Graphon 225,
13927 OTbs, am, mir, xenl,
13928 cols#80, it#8, lines#25, vt#3,
13929 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13930 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13931 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13932 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13933 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13934 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13935 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13936 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13937 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13938 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13939 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13940 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13942 #### Harris (Beehive)
13944 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13945 # Their terminal group is ancient history now (1995) though the parent
13946 # company is still in business.
13949 # Beehive documentation is undated and marked Preliminary and has no figures
13950 # so we must have early Superbee2 (Model 600, according to phone conversation
13951 # with mfr.). It has proved reliable except for some missing padding
13952 # (notably after \EK and <nl> at bottom of screen).
13954 # The key idea is that AEP mode is poison for <cup> & that US's in
13955 # the local memory should be avoided like the plague. That means
13956 # that the 2048 character local buffer is used as 25 lines of 80
13957 # characters, period. No scrolling local memory, folks. It also
13958 # appears that we cannot use naked INS LINE feature since it uses
13959 # US. The sbi fakes <il1> with an 80-space insert that may be too
13960 # slow at low speeds; also spaces get converted to \040 which is
13961 # too long for some programs (not vi). DEL LINE is ok but slow.
13963 # The <nl> string is designed for last line of screen ONLY; cup to
13964 # 25th line corrects the motion inherent in scrolling to Page 1.
13966 # There is one understood bug. It is that the screen appears to
13967 # pop to a new (blank) page after a <nel>, or leave a half-line
13968 # ellipsis to a quad that is the extra 48 memory locations. The
13969 # data received is dumped into memory but not displayed. Not to
13970 # worry if <cup> is being used; the lines not displayed will be,
13971 # whenever the cursor is moved up there. Since <cup> is addressed
13972 # relative to MEMORY of window, nothing is lost; but beware of
13973 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13974 # therefore, is setenv MORE -c .
13976 # WARNING: Not all features tested.
13978 # Timings are assembled from 3 sources. Some timings may reflect
13979 # SB2/Model 300 that were used if more conservative.
13980 # Tested on a Model 600 at 1200 and 9600 bd.
13982 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13983 # placed on the keyboard and useless because of AEP, is made
13984 # into a backspace key. In use ESC must be pressed twice (to send)
13985 # and sending ^C must be prefixed by ESC to avoid that weird
13986 # transmit mode associated with ENTER key.
13988 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13989 # the screen, then it has dropped into ENTER mode; hit
13990 # RESET--ONLINE--!tset.
13992 # As delivered this machine has a FATAL feature that will throw
13993 # it into that strange transmit state (SPOW) if the space bar is
13994 # hit after a CR is received, but before receiving a LF (or a
13997 # The circuits MUST be modified to eliminate the SPOW latch.
13998 # This is done by strapping on chip A46 of the I/O board; cut
13999 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
14000 # chip. This mod has been checked out on a Mod 600 of Superbee II.
14001 # With this modification absurdly high timings on cr are
14004 # NOTE WELL that the rear panel switch should be set to CR/LF,
14007 sb1|beehive superbee,
14008 OTbs, am, bw, da, db, mir, ul, xsb,
14009 cols#80, lines#25, xmc#1,
14010 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
14011 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
14012 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
14013 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
14014 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
14015 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
14016 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
14017 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
14018 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
14019 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
14020 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
14021 smso=\E_1, smul=\E_0, tbc=\E3,
14022 sbi|superbee|beehive superbee at Indiana U.,
14024 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
14026 # Alternate (older) description of Superbee - f1=escape, f2=^C.
14027 # Note: there are at least 3 kinds of superbees in the world. The sb1
14028 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
14029 # The sb3 puts garbage on the bottom of the screen when you scroll with
14030 # the switch in the back set to CRLF instead of AEP. This description
14031 # is tested on the sb2 but should work on all with either switch setting.
14032 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
14033 # the other two if you want to try to hit that tiny escape key.
14034 # This description is tricky: being able to use cup depends on there being
14035 # 2048 bytes of memory and the hairy <nl> string.
14036 superbee-xsb|beehive super bee,
14038 cols#80, it#8, lines#25,
14039 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
14040 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
14041 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
14042 home=\EH, ht=^I, hts=\E1,
14043 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
14044 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
14045 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
14046 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
14047 # This loses on lines > 80 chars long, use at your own risk
14048 superbeeic|super bee with insert char,
14049 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
14050 sb2|sb3|fixed superbee,
14051 xsb@, use=superbee,
14053 #### Beehive Medical Electronics
14055 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
14056 # Regarding your question though; Beehive terminals weren't made by Harris.
14057 # They were made by Beehive Medical Electronics in Utah. They went out of
14058 # business in the early '80s.
14060 # (OK, then, I don't know why a couple of these say "harris beehive".)
14063 # Reports are that most of these Beehive entries (except superbee) have not
14064 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
14066 # (bee: <ich1> was empty, which is obviously bogus -- esr)
14067 beehive|bee|harris beehive,
14070 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
14071 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14072 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
14073 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14074 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
14075 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
14076 smir=\EQ, smso=\EdP, smul=\Ed`,
14077 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
14078 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
14079 # look at those spaces in <rmso>/<smso>. Seems strange to me...
14080 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
14081 # really care, cook up one using ^F -- esr)
14082 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
14084 cols#80, it#8, lines#20,
14085 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
14086 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
14087 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
14088 beehive4|bh4|beehive 4,
14091 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14092 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
14093 # There was an early Australian kit-built computer called a "Microbee".
14094 # It's not clear whether this is for one of those or for a relative
14096 microb|microbee|micro bee series,
14098 cols#80, it#8, lines#24,
14099 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14100 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14101 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14102 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
14103 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
14104 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
14106 # 8675, 8686, and bee from Cyrus Rahman
14107 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
14108 ha8675|harris 8675,
14109 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
14110 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
14111 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
14112 kf8=\177, kf9=\Ee, use=bee,
14113 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
14115 ha8686|harris 8686,
14116 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
14117 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
14118 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
14119 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
14120 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
14125 # Hazeltine appears to be out of the terminal business as of 1995. These
14126 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
14127 # Harris. They have a hazeltine.com domain (but no web page there ) and can
14131 # 450 East Pulaski Road
14132 # Greenlawn, New York 11740
14134 # As late as 1993, manuals for the terminal product line could still be
14137 # TRW Customer Service Division
14140 # Fairfield, NJ 07007-2078
14142 # They're now (1998) a subsidiary of General Electric, operating under the
14143 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
14144 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
14147 # Since <cuf1> is blank, when you want to erase something you
14148 # are out of luck. You will have to do ^L's a lot to
14149 # redraw the screen. h1000 is untested. It doesn't work in
14150 # vi - this terminal is too dumb for even vi. (The code is
14151 # there but it isn't debugged for this case.)
14152 hz1000|hazeltine 1000,
14155 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
14157 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
14158 hz1420|hazeltine 1420,
14161 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
14162 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
14163 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
14165 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
14166 # freakout with out-of-range args and tn3270. No hz since it needs to
14168 hz1500|hazeltine 1500,
14171 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14172 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
14173 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
14174 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
14175 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
14176 # h1510 assumed to be in sane escape mode. Else use h1500.
14177 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
14178 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
14179 # removed incorrect and overridden ":do=^J:" -- esr)
14180 hz1510|hazeltine 1510,
14183 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
14184 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
14185 el=\E^O, il1=\E^Z, ind=^J,
14187 # The following switch settings are assumed for normal operation:
14188 # FULL CR U/L_CASE ESCAPE
14189 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
14190 # Other switches may be set for operator convenience or communication
14192 hz1520|Hazeltine 1520,
14193 OTbs, am, bw, msgr,
14195 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
14196 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14197 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
14198 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
14199 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
14200 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
14201 # This version works with the escape switch off
14202 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
14203 hz1520-noesc|hazeltine 1520,
14206 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14207 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
14208 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
14209 # Note: the h1552 appears to be the first Hazeltine terminal which
14210 # is not braindamaged. It has tildes and backprimes and everything!
14211 # Be sure the auto lf/cr switch is set to cr.
14212 hz1552|hazeltine 1552,
14214 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
14215 lf2=red, lf3=green, use=vt52,
14216 hz1552-rv|hazeltine 1552 reverse video,
14217 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
14218 # Note: h2000 won't work well because of a clash between upper case and ~'s.
14219 hz2000|hazeltine 2000,
14222 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
14223 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
14224 il1=~\032$<6>, ind=^J, pad=\177,
14225 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
14226 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
14227 # to work ok. There is one problem though if one types a lot of garbage
14228 # characters very fast vi seems not able to keep up and hangs while trying
14229 # to insert. That's in insert mode while trying to insert in the middle of
14230 # a line. It might be because the Esprit doesn't have insert char and delete
14231 # char as a built in function. Vi has to delete to end of line and then
14232 # redraw the rest of the line.
14233 esprit|Hazeltine Esprit I,
14236 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
14237 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14238 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
14239 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
14240 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
14241 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
14242 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
14243 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
14244 esprit-am|hazeltine esprit auto-margin,
14246 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
14247 # Vi it seems always wants to send a control J for "do" and it turned out
14248 # that the terminal would work somewhat if the auto LF/CR was turned off.
14249 # (hmod1: removed :dn=~^K: -- esr)
14250 hmod1|Hazeltine Modular 1,
14253 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14254 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
14255 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
14256 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
14258 # Hazeltine Executive 80 Model 30 (1554?)
14259 # from Will Martin <control@ALMSA-1.ARPA> via BRL
14260 # Like VT100, except for different "am" behavior.
14261 hazel|exec80|h80|he80|Hazeltine Executive 80,
14263 cols#80, it#8, lines#24, vt#3,
14264 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
14265 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14266 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
14267 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
14268 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
14269 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
14270 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14271 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
14272 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
14273 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
14274 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
14275 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
14281 ibm327x|line mode IBM 3270 style,
14283 clear=^M^J, el=^M, home=^M,
14285 ibm3101|i3101|IBM 3101-10,
14288 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14289 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14290 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
14291 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
14292 ibm3151|IBM 3151 display,
14293 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
14294 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
14295 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
14296 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
14297 # removed kend, knp, kpp -TD
14298 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
14299 OTbs, am, mir, msgr,
14300 cols#80, it#8, lines#24,
14301 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
14302 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
14303 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14304 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
14305 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
14306 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
14307 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
14308 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
14309 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
14310 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
14311 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
14312 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
14313 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
14314 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
14315 rmso=\E4@, rmul=\E4@,
14316 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
14317 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
14319 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
14320 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
14321 ibm3162|IBM 3162 display,
14322 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
14323 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
14326 # This really should not use setab/setaf, but it is clear that the
14327 # original terminfo does not toggle red/blue colors as in setb/setf.
14328 ibm3164|i3164|IBM 3164,
14330 colors#8, pairs#64,
14331 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
14332 setab=\E4 %p1%{64}%+%c,
14333 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
14334 smcup=\E!9/N\E>B, use=ibm3161,
14336 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
14338 cols#80, it#8, lines#25,
14339 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14340 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14341 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14342 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14343 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
14344 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
14345 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
14346 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
14347 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14348 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
14349 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
14350 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
14351 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
14352 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
14353 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
14354 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
14355 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
14356 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
14357 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14358 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
14359 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
14360 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
14361 rmso=\E[m, rmul=\E[m, rs2=\Ec,
14362 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
14363 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14365 ibmaed|IBM Experimental display,
14366 OTbs, am, eo, msgr,
14367 cols#80, it#8, lines#52,
14368 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
14369 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
14370 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
14371 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14372 rmso=\E0, sgr0=\E0, smso=\E0,
14373 ibm-apl|apl|IBM apl terminal simulator,
14374 lines#25, use=dm1520,
14375 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
14376 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
14377 ibmmono|IBM workstation monochrome,
14379 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
14380 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
14381 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
14382 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
14383 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
14384 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
14386 ibmega|IBM Enhanced Color Display,
14387 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14388 nel=^M^J, use=ibmmono,
14389 # This color scheme is assumed in some recent IBM terminal descriptions
14390 # (green on black, emulated on a 16-color terminal).
14391 ibm+color|IBM color definitions,
14392 colors#8, ncv#3, pairs#64,
14394 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
14395 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
14396 ibm+16color|IBM aixterm color definitions,
14397 colors#16, pairs#256,
14398 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
14399 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
14400 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14401 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14402 ibm5154|IBM 5154 Color display,
14403 colors#8, ncv@, pairs#64,
14404 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14406 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
14407 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
14409 ibmvga-c|IBM VGA display color termcap,
14410 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14411 nel=^M^J, use=ibmega-c,
14412 ibmvga|IBM VGA display,
14413 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14414 nel=^M^J, use=ibmega,
14415 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
14416 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
14418 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
14419 ibm6155|IBM 6155 Black & White display,
14420 blink@, bold@, use=ibm5151,
14421 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
14422 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
14424 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
14425 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
14427 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
14429 ibm6154|IBM 6154 Color displays,
14430 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14431 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14432 sgr0=\E[0;10m, use=ibm5154,
14433 ibm6153|IBM 6153 Black & White display,
14434 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14435 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14436 sgr0=\E[0;10m, use=ibm5151,
14437 ibm6153-90|IBM 6153 Black & White display,
14439 blink@, bold@, use=ibm5151,
14440 ibm6153-40|IBM 6153 Black & White display,
14441 cols#40, lines#12, use=ibm6153-90,
14442 ibm8512|ibm8513|IBM color VGA Terminal,
14444 cols#80, it#8, lines#25,
14445 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
14446 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
14447 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
14448 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
14449 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
14450 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
14451 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14452 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
14453 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
14454 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
14455 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
14456 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
14457 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14459 hft-c|HFT with Color,
14460 colors#8, pairs#64,
14461 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
14462 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
14463 use=ibm5151, use=ibm+color,
14464 hft-c-old|HFT with Color PC850,
14465 colors#8, pairs#64,
14466 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14468 hft-old|AIWS High Function Terminal,
14471 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14472 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14473 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
14474 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
14475 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14476 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
14477 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14478 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
14479 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
14480 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
14481 ibm-system1|system1|ibm system/1 computer,
14484 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
14485 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
14487 # lft-pc850 : IBM Low Function Terminal Device
14488 # lft "supports" underline, bold, and blink in the sense that the lft code
14489 # sets all the right bits. HOWEVER, depending upon the adapter, these
14490 # attributes may or may not be supported by the device driver.
14491 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
14493 cols#80, it#8, lines#25,
14494 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14495 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14496 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14497 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14498 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14499 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
14500 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
14501 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
14502 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
14503 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
14504 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
14505 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
14506 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
14507 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
14508 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
14509 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
14510 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
14511 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
14512 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14513 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
14514 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
14515 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
14516 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
14517 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14518 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14520 # "Megapel" refers to the display adapter, which was used with the IBM RT
14522 ibm5081|hft|IBM Megapel Color display,
14523 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
14524 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
14525 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
14528 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
14530 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
14532 ibm8514|IBM 8514/a color VGA display,
14534 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
14535 ibm8514-c|IBM 8514 color display with standout and underline,
14538 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
14539 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
14543 # AIX entries. IBM ships these with AIX 3.2.5.
14544 # -- added rc, sc based on manpage -TD
14545 # Note that we could use ibm+16color, but that is not how IBM defines this one.
14546 aixterm|IBM Aixterm Terminal Emulator,
14548 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14549 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
14550 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14551 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
14552 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
14554 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14555 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
14556 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14557 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
14558 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
14560 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
14561 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14562 tsl=\E[?%p1%dT, use=ibm6153,
14563 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
14564 acsc@, use=aixterm,
14565 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
14566 acsc@, use=aixterm-m,
14568 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
14569 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
14570 use=ibm+16color, use=aixterm,
14572 #### Infoton/General Terminal Corp.
14575 # gt100 sounds like something DEC would come out with. Let's hope they don't.
14576 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
14579 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14580 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
14581 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
14582 ind=^J, rmso=\Ea, smso=\Eb,
14586 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14587 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
14588 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
14589 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
14590 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
14594 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
14595 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
14596 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
14600 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
14601 ed=^K, ind=^J, ll=^H^\,
14603 # The ICL6402 was actually the Kokusai Display System 6402.
14604 # The 6404 was the KDS7372 (color version of the 6402).
14606 # ICL6404 control codes follow:
14609 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
14610 #ctrl-A set SOM position at cursor position
14616 #ctrl-L Cursor right
14617 #ctrl-M Carriage return
14618 #ctrl-N Disable xon/xoff to host
14619 #ctrl-O Enable xon/xoff to host
14620 #ctrl-R Enable bidirectional mode
14621 #ctrl-T Disable bidirectional mode
14622 #ctrl-V Cursor down
14623 #ctrl-Z Clear unprotected data to insert char
14624 #ctrl-^ Cursor home
14627 #ESC lead-in char for multiple character command
14629 #ESC space R execute power on sequence
14630 #ESC ! p1 p2 define scroll region:
14631 # p1 = scroll top line: 20h - 37h
14632 # p1 = scroll bottom line: 20h - 37h
14633 #ESC " unlock keyboard
14634 #ESC # lock keyboard
14635 #ESC $ Semi-graphics mode on
14636 #ESC % Semi-graphics mode off
14637 #ESC & protect mode on
14638 #ESC ' protect mode off
14639 #ESC ( write protect mode off (full intensity)
14640 #ESC ) write protect mode on (half intensity)
14642 #ESC * clear screen
14643 #ESC + clear unprotected data to insert char
14644 #ESC , clear unprotected data to half intensity spaces
14645 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
14646 # p1 = page number 0 - 3
14647 # p2 = row 20h - 7fh
14648 # p3 = column (lo) 20h - 7fh
14649 # p4 = column (hi) 20h - 21h (only 132 col)
14650 #ESC . p1 set cursor style:
14651 # p1 = 0 invisible cursor
14652 # p1 = 1 block blinking cursor
14653 # p1 = 2 block steady cursor
14654 # p1 = 3 underline blinking cursor
14655 # p1 = 4 underline steady cursor
14656 #ESC / transmit cursor location (page, row, column)
14657 #ESC 0 p1 p2 p3 p4 program edit key:
14658 # p1 = edit key code: '@'-'S', '`'-'s'
14659 # p2 p3 p4 = program data (3 bytes)
14662 #ESC 2 clear tab at cursor
14663 #ESC 3 clear all tabs
14664 #ESC 4 send unprotect line to cursor
14665 #ESC 5 send unprotect page to cursor
14666 #ESC 6 send line to cursor
14667 #ESC 7 send page to cursor
14668 #ESC 8 n set scroll mode:
14669 # n = 0 set jump scroll
14670 # n = 1 set smooth scroll
14671 #ESC 9 n control display:
14672 # n = 0 display off
14674 #ESC : clear unprotected data to null
14675 #ESC ; clear unprotected data to insert char
14678 #ESC = p1 p2 address cursor to row, column
14679 # p1 = row 20h - 7fh
14680 # p2 = column (lo) 20h - 7fh
14681 # p3 = column (hi) 20h - 21h (only 132 col)
14682 #ESC > keyclick off
14683 #ESC ? transmit cursor location (row, column)
14685 #ESC @ copy print mode on
14686 #ESC A copy print mode off
14687 #ESC B block mode on
14688 #ESC C block mode off (conversation mode)
14689 #ESC D F set full duplex
14690 #ESC D H set half duplex
14692 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
14693 # 0 = black, 1 = red, 2 = green, 3 = yellow
14694 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
14695 #ESC G n set serial field attribute (n = 30h - 3Fh)
14696 #ESC H n full graphics mode:
14697 # n = 0 exit full graphics mode
14698 # n = 1 enter full graphics mode
14701 #ESC K forward page
14703 #ESC L unformatted page print
14704 #ESC M L move window left (132 col mode only)
14705 #ESC M R move window right (132 col mode only)
14706 #ESC N set page edit (clear line edit)
14707 #ESC O set line edit (clear page edit)
14708 #ESC P formatted page print
14709 #ESC Q character insert
14711 #ESC S send message unprotected only
14712 #ESC T erase line to insert char
14713 #ESC U set monitor mode (see ESC X, ESC u)
14715 #ESC V n select video attribute mode:
14716 # n = 0 serial field attribute mode
14717 # n = 1 parallel character attribute mode
14718 #ESC V 2 n define line attribute:
14719 # n = 0 single width single height
14720 # n = 1 single width double height
14721 # n = 2 double width single height
14722 # n = 3 double width double height
14723 #ESC V 3 n select character font:
14724 # n = 0 system font
14725 # n = 1 user defined font
14726 #ESC V 4 n select screen mode:
14727 # n = 0 page screen mode
14728 # n = 1 virtual screen mode
14729 #ESC V 5 n control mouse mode:
14730 # n = 0 disable mouse
14731 # n = 1 enable sample mode
14732 # n = 2 send mouse information
14733 # n = 3 enable request mode
14734 #ESC W character delete
14735 #ESC X clear monitor mode (see ESC U, ESC u)
14736 #ESC Y erase page to insert char
14738 #ESC Z n send user/status line:
14739 # n = 0 send user line
14740 # n = 1 send status line
14741 # n = 2 send terminal ID
14742 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14746 # 3 = blink blank (= blank)
14748 # 5 = reverse blank
14749 # 6 = reverse blink
14750 # 7 = reverse blink blank (= reverse blank)
14752 # 9 = underline blank
14753 # : = underline blink
14754 # ; = underline blink blank
14755 # < = reverse underline
14756 # = = reverse underline blank
14757 # > = reverse underline blink
14758 # ? = reverse underline blink blank
14759 # p2, p3: f/grnd, b/grnd colour
14760 # (see ESC F for colours)
14761 # use ZZ for mono, eg.
14762 # ESC [ 0 Z Z for normal
14763 # ESC [ 4 Z Z for inverse etc.
14765 #ESC \ n set page size:
14766 # n = 1 24 lines/page
14767 # n = 2 48 lines/page
14768 # n = 3 72 lines/page
14769 # n = 4 96 lines/page
14770 #ESC ] n set Wordstar mode:
14771 # n = 0 normal (KDS7372) mode
14772 # n = 1 Wordstar mode
14774 #ESC b set foreground colour screen
14776 #ESC c n enter self-test mode:
14777 # n = 0 exit self test mode
14781 # n = 4 screen display test
14782 # n = 5 main/printer port test
14783 # n = 6 mouse port test
14784 # n = 7 graphics board test
14785 # n = 8 graphics memory test
14786 # n = 9 display all 'E'
14787 # n = : display all 'H'
14788 #ESC d set background colour screen
14790 #ESC e n program insert char (n = insert char)
14791 #ESC f text CR load user status line with 'text'
14793 #ESC g display user status line on 25th line
14794 #ESC h display system status line on 25th line
14796 #ESC j reverse linefeed
14797 #ESC k n duplex/local edit mode:
14798 # n = 0 duplex edit mode
14799 # n = 1 local edit mode
14800 #ESC l n select virtual screen:
14803 #ESC m save current config to NVRAM
14804 #ESC n p1 select display screen:
14809 #ESC o p1 p2 set characters/line and attribute:
14810 # p1 = 0 80 chars/line
14812 #ESC o p1 p2 set characters/line and attribute:
14813 # p1 = 0 80 chars/line
14814 # p1 = 1 132 chars/line
14815 # p2 = 0 single width single height
14816 # p2 = 1 single width double height
14817 # p2 = 2 double width single height
14818 # p2 = 3 double width double height
14820 #ESC q insert mode on
14821 #ESC r edit mode on
14822 #ESC s send message all
14823 #ESC t erase line to null
14824 #ESC u clear monitor mode (see ESC U, ESC X)
14825 #ESC v autopage mode on
14826 #ESC w autopage mode off
14827 #ESC x p1 p2 p3 define delimiter code...
14828 #ESC y erase page to null
14830 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14831 # p1 = starting row
14832 # p2 = starting column
14836 #ESC { p1 p2 p3 p4 configure main port
14837 # (baud, stop bits, parity, word length)
14839 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14840 # p1 = function key code:
14841 # '1' - ';' normal f1- f11
14842 # '<' - 'F' shifted f1 - f11
14843 # p2 = program mode:
14847 # Ctrl-Y = terminator
14848 # (use Ctrl-P to escape ^P, ^Y )
14850 #ESC } p1 p2 p3 p4 configure printer port
14851 # (baud, stop bits, parity, word length)
14852 #ESC ~ send system status
14854 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14856 # Entry is by esr going solely on above information and is UNTESTED.
14857 # This actually looks a lot like a Televideo 9xx.
14858 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14859 # to make color work without a test terminal. The <am> capability is a guess.
14860 # The initialization string sets conversation mode, blinking underline cursor,
14861 # full duplex, parallel attribute mode, display user status line, white
14862 # foreground, black background, normal highlight.
14864 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14867 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14869 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14870 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14871 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14872 hts=\E1, il1=\EE, invis=\E[1ZZ,
14873 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14874 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14875 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14876 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
14877 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14878 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14879 rs2=\Eo1, use=icl6404,
14881 #### Interactive Systems Corp
14883 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14884 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14885 # bought out by Sun.
14888 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14889 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14890 # ":le=^_:" later overridden -- esr)
14891 intext|Interactive Systems Corporation modified owl 1200,
14893 cols#80, it#8, lines#24, xmc#1,
14894 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14895 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14896 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14897 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14898 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14899 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14900 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14901 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14903 intext2|intextii|INTERACTIVE modified owl 1251,
14905 cols#80, lines#24, xmc#0,
14906 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
14907 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14908 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14909 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14910 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14911 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14912 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14913 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14914 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14915 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14916 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14919 #### Kimtron (abm, kt)
14921 # Kimtron seems to be history, but as March 1998 these people are still
14922 # offering repair services for Kimtron equipment:
14924 # Com/Pair Monitor Service
14925 # 1105 N. Cliff Ave.
14926 # Sioux Falls, South Dakota 57103
14928 # WATS voice: 1-800/398-4946
14929 # POTS fax: +1 605/338-8709
14930 # POTS voice: +1 605/338-9650
14931 # Email: <compair@sd.cybernex.net>
14932 # Internet/Web: <http://www.com-pair.com>
14934 # Kimtron entries include (undocumented) codes for: enter dim mode,
14935 # enter bold mode, enter reverse mode, turn off all attributes.
14938 # Kimtron ABM 85 added by Dual Systems
14939 # (abm85: removed duplicated ":kd=^J:" -- esr)
14940 abm85|Kimtron ABM 85,
14941 OTbs, am, bw, msgr,
14942 cols#80, it#8, lines#24, xmc#1,
14943 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14944 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14945 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14946 if=/usr/share/tabset/stdcrt, il1=\EE,
14947 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14948 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14949 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14950 # Kimtron ABM 85H added by Dual Systems.
14951 # Some notes about the abm85h entries:
14952 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14953 # firmware revs prior to SP51
14954 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14955 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14956 # in some places and NOT software settable i.e., <is2> can't fix it)
14957 # 3) In 85h mode, the arrow keys and special functions transmit when
14958 # the terminal is in dup-edit, and work only locally in local-edit.
14959 # Vi won't swallow `del char' for instance, but <smcup> turns on
14960 # dup-edit anyway so that the arrow keys will work right. If the
14961 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14962 # <is2>. Note that 920E mode does not have software commands to toggle
14963 # between dup and local edit, so you get whatever was set last on the
14965 # 4) <flash> attribute is nice, but seems too slow to work correctly
14967 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14968 # are selected, the <xmc@> entry should be removed.
14969 # 6) auto new-line should be on (selectable from setup mode only)
14971 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14972 abm85h|Kimtron ABM 85H native mode,
14975 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14977 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14978 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14980 abm85e|Kimtron ABM 85H in 920E mode,
14982 bel=^G, dim=\E), flash@,
14983 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14984 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14985 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14988 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14989 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14990 # From: <malman@bbn-vax.arpa>
14991 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
14992 kt7|kimtron model kt-7,
14994 cols#80, it#8, lines#24,
14995 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
14996 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14997 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
14998 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
14999 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
15000 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
15001 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15002 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15003 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
15004 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
15005 # other kt7 entry and the adjacent key capabilities). Removed EE which is
15006 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
15007 # but we can't figure out what.
15008 kt7ix|kimtron model kt-7 or 70 in IX mode,
15010 cols#80, it#8, lines#25,
15011 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
15012 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
15013 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15014 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
15015 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
15016 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
15017 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
15018 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15019 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15020 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
15021 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
15022 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
15024 #### Microdata/MDIS
15026 # This was a line of terminals made by McDonnell-Douglas Information Systems.
15027 # These entries come direct from MDIS documentation. I have edited them only
15028 # to move primary names of the form p[0-9] * to aliases, and to comment out
15029 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
15030 # also removed the change history; the last version indicates this is
15031 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
15034 # McDonnell Information Systems Terminal Family History
15035 # =========================================
15037 # Prism-1, Prism-2 and P99:
15038 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
15040 # Prism-4 and Prism-5:
15041 # Slightly less ancient range of Microdata terminals. Follow-on from
15042 # Prism-2, but with many enhancements. P5 has eight display pages.
15045 # A special terminal for use with library systems, primarily in Germany.
15046 # Limited numbers. Similar functionality to P5 (except attributes?).
15048 # Prism-7, Prism-8 and Prism-9:
15049 # More recent range of MDIS terminals, in which P7 and P8
15050 # replace the P4 & P5, with added functionality, and P9 is the flagship.
15051 # The P9 has two emulation modes - P8 and ANSI - and includes a
15052 # large number of the DEC VT220 control sequences. Both
15053 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
15055 # Prism-12 and Prism-14:
15056 # Latest range, functionally very similar to the P9. The P14 has a
15057 # black-on-white overscanning screen.
15059 # The terminfo definitions given here are:
15061 # p2 - Prism-2 (or Prism-1 or P99).
15063 # p4 - Prism-4 (and older P7s & P8s).
15064 # p5 - Prism-5 (or Prism-6).
15067 # p8 - Prism-8 (in national or multinational mode).
15068 # p8-w - 132 column version of p8.
15069 # p9 - Prism-9 in ANSI mode.
15070 # p9-w - 132 column version of p9.
15071 # p9-8 - Prism-9 in Prism-8 emulation mode.
15072 # p9-8-w - As p9-8, but with 132 columns.
15074 # p12 - Prism-12 in ANSI mode.
15075 # p12-w - 132 column version of p12.
15076 # p12-m - Prism-12 in MDC emulation mode.
15077 # p12-m-w - As p12-m, but with 132 columns.
15078 # p14 - Prism-14 in ANSI mode.
15079 # p14-w - 132 column version of p14.
15080 # p14-m - Prism-14 in MDC emulation mode.
15081 # p14-m-w - As p14-m, but with 132 columns.
15086 # Includes Prism-1 and basic P99 without SP or MP loaded.
15087 # The simplest form of Prism-type terminal.
15088 # Basic cursor movement and clearing operations only.
15089 # No video attributes.
15091 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15092 # value up, followed by backspace.
15094 prism2|MDC Prism-2,
15097 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15098 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15099 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
15100 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15101 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
15106 # Includes early versions of P7 & P8.
15107 # Basic family definition for most Prisms (except P2 and P9 ANSI).
15109 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15110 # value up, followed by backspace.
15111 # Cursor key definitions removed because they interfere with vi and csh keys.
15113 prism4|p4|P4|MDC Prism-4,
15114 am, bw, hs, mc5i, msgr,
15115 cols#80, lines#24, wsl#72, xmc#1,
15116 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
15117 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15118 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15119 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
15120 fsl=^]\345, home=^A,
15121 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15122 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
15123 rev=^CD, rmso=^C\s, rmul=^C\s,
15124 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
15125 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
15126 vpa=\013%p1%{32}%+%c,
15131 # Same definition as p4. Includes Prism-6 (not tested!).
15132 # Does not use any multi-page features.
15134 prism5|p5|P5|MDC Prism-5,
15140 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
15142 # Use p4 for very early models of P7.
15143 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15145 prism7|p7|P7|MDC Prism-7,
15146 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
15151 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
15152 # Supports national and multinational character sets.
15154 # Alternate char set operations only work in multinational mode.
15155 # Use p4 for very early models of P8.
15156 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15157 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15159 prism8|p8|P8|MDC Prism-8,
15160 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
15161 vpa=\E[%i%p1%dd, use=p4,
15163 # p8-w: Prism-8 in 132 column mode
15164 # --------------------------------
15166 # 'Wide' version of p8.
15168 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15170 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
15172 is2=\E[<12h\E[<14h, use=p8,
15174 # p9: Prism-9 in ANSI mode
15175 # -------------------------
15177 # The "flagship" model of this generation of terminals.
15178 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
15180 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
15181 # Fixes to deal with terminal firmware bugs:
15182 # . 'ri' uses insert-line since rev index doesn't always
15183 # . 'sgr0' has extra '0' since esc[m fails
15184 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
15185 # Not covered in the current definition:
15187 # . Programming Fn keys
15188 # . Graphic characters (defaults correctly to vt100)
15189 # . Padding values (sets xon)
15190 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15192 prism9|p9|P9|MDC Prism-9 in ANSII mode,
15193 am, bw, hs, msgr, xenl, xon,
15194 cols#80, it#8, lines#24, vt#3, wsl#72,
15195 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
15196 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
15197 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15198 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15199 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15200 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
15201 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
15202 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
15203 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
15204 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
15205 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
15206 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
15207 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
15208 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
15209 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
15210 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
15211 rmso=\E[27m, rmul=\E[24m,
15212 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
15214 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
15215 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15216 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
15219 # p9-w: Prism-9 in 132 column mode
15220 # --------------------------------
15222 # 'Wide' version of p9.
15224 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
15226 is2=\E[&p\E[<12l\E F\E[<14h,
15227 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
15229 # p9-8: Prism-9 in P8 mode
15230 # ------------------------
15232 # P9 terminal in P8 emulation mode.
15233 # Similar to p8 definition.
15234 # Insertion and deletion operations possible.
15236 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
15237 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15238 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
15240 # p9-8-w: Prism-9 in P8 and 132 column modes
15241 # ------------------------------------------
15243 # P9 terminal in P8 emulation mode and 132 column mode.
15245 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
15246 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15247 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
15249 # p12: Prism-12 in ANSI mode
15250 # ---------------------------
15252 # See p9 definition.
15254 prism12|p12|P12|MDC Prism-12 in ANSI mode,
15257 # p12-w: Prism-12 in 132 column mode
15258 # ----------------------------------
15260 # 'Wide' version of p12.
15262 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
15265 # p12-m: Prism-12 in MDC emulation mode
15266 # -------------------------------------
15268 # P12 terminal in MDC emulation mode.
15269 # Similar to p8 definition.
15270 # Insertion and deletion operations possible.
15272 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
15275 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
15276 # -------------------------------------------------------
15278 # P12 terminal in MDC emulation mode and 132 column mode.
15280 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
15283 # p14: Prism-14 in ANSII mode
15284 # ---------------------------
15286 # See p9 definition.
15288 prism14|p14|P14|MDC Prism-14 in ANSII mode,
15291 # p14-w: Prism-14 in 132 column mode
15292 # ----------------------------------
15294 # 'Wide' version of p14.
15296 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
15299 # p14-m: Prism-14 in MDC emulation mode
15300 # -------------------------------------
15302 # P14 terminal in MDC emulation mode.
15303 # Similar to p8 definition.
15304 # Insertion and deletion operations possible.
15306 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
15309 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
15310 # -------------------------------------------------------
15312 # P14 terminal in MDC emulation mode and 132 column mode.
15314 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
15317 # End of McDonnell Information Systems Prism definitions
15319 # These things were popular in the Pick database community at one time
15320 # From: George Land <georgeland@aol.com> 24 Sep 1996
15321 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
15323 cols#80, lines#24, ma#1, wsl#78, xmc#1,
15324 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
15325 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
15326 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
15327 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
15328 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
15329 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
15330 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15331 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
15332 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
15333 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
15336 #### Microterm (act, mime)
15338 # The mime1 entries refer to the Microterm Mime I or Mime II.
15339 # The default mime is assumed to be in enhanced act iv mode.
15342 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
15343 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
15344 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
15345 # since Sytek insists ^S means xoff.
15346 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
15347 act4|microterm|microterm act iv,
15350 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
15351 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
15352 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
15353 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
15354 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
15356 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
15357 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
15358 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
15359 act5|microterm5|microterm act v,
15360 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
15362 # Mimes using brightness for standout. Half bright is really dim unless
15363 # you turn up the brightness so far that lines show up on the screen.
15364 mime-fb|full bright mime1,
15365 is2=^S\E, rmso=^S, smso=^Y, use=mime,
15366 mime-hb|half bright mime1,
15367 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
15368 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
15369 # the more plausible ":do=^J:" -- esr)
15370 # uc was at one time disabled to get around a curses bug, be wary of it
15371 mime|mime1|mime2|mimei|mimeii|microterm mime1,
15373 cols#80, it#8, lines#24, vt#9,
15374 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
15375 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
15376 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
15377 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
15378 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
15379 # These termcaps (for mime2a) put the terminal in low intensity mode
15380 # since high intensity mode is so obnoxious.
15381 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
15384 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15385 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
15386 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
15387 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
15388 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
15389 smir=\EE, smso=\E\:, smul=\E6,
15390 # This is the preferred mode (but ^X can't be used as a kill character)
15391 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
15393 cols#80, it#8, lines#24,
15394 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15395 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
15396 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
15397 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
15398 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
15399 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
15400 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
15401 mime3a|mime1 emulating 3a,
15403 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
15404 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
15406 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
15408 # Wed Mar 9 18:53:21 1983
15409 # We run our terminals at 2400 baud, so there might be some timing problems at
15410 # higher speeds. The major improvements in this model are the terminal now
15411 # scrolls down and insert mode works without redrawing the rest of the line
15412 # to the right of the cursor. This is done with a bit of a kludge using the
15413 # exit graphics mode to get out of insert, but it does not appear to hurt
15414 # anything when using vi at least. If you have some users using act4s with
15415 # programs that use curses and graphics mode this could be a problem.
15416 mime314|mm314|mime 314,
15419 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
15420 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
15421 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
15422 # Microterm mime 340 from University of Wisconsin
15423 mm340|mime340|mime 340,
15425 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15426 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15427 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
15428 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
15429 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
15430 # This came from University of Wisconsin marked "astro termcap for jooss".
15431 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
15432 # also added <rmam>/<smam> based on the init string -- esr)
15433 mt4520-rv|micro-term 4520 reverse video,
15434 am, hs, msgr, xenl, xon,
15435 cols#80, it#8, lines#24, wsl#80,
15436 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
15437 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15438 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15439 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15440 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15441 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
15442 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
15443 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
15444 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
15445 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15446 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
15447 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
15448 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
15449 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
15450 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
15451 tbc=\E[g, tsl=\E[25;1H,
15453 # Fri Aug 5 08:11:57 1983
15454 # This entry works for the ergo 4000 with the following setups:
15455 # ansi,wraparound,newline disabled, xon/xoff disabled in both
15458 # WARNING!!! There are multiple versions of ERGO 4000 microcode
15459 # Be advised that very early versions DO NOT WORK RIGHT !!
15460 # Microterm does have a ROM exchange program- use it or lose big
15461 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
15462 ergo4000|microterm ergo 4000,
15465 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
15466 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15467 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
15468 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
15469 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
15470 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15471 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
15472 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
15473 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
15474 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
15479 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
15480 # For what happened to that group, see the ADDS section.
15482 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
15485 # The following vendor-supplied termcaps were captured from the Boundless
15486 # Technologies site, 8 March 1998. I removed all-upper-case names that were
15487 # identical, except for case, to lower-case ones. I also uncommented the acsc
15490 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15491 # DEC vt200/300 with color capabilities added.
15492 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15493 colors#8, pairs#64,
15494 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15496 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15497 # DEC vt200/300 with color capabilities added.
15498 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15499 colors#8, pairs#64,
15500 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15501 use=ncr260vt300wan,
15502 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15503 # DEC vt200/300 with color capabilities added.
15504 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
15505 colors#8, pairs#64,
15506 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15508 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
15509 # DEC vt200/300 with color capabilities added.
15510 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
15511 colors#8, pairs#64,
15512 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15513 use=ncr260vt300wpp,
15514 # This definition for ViewPoint supports several attributes. This means
15515 # that it has magic cookies (extra spaces where the attributes begin).
15516 # Some applications do not function well with magic cookies. The System
15517 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15518 # If supporting various attributes is not vital, 'xmc#1' and the extra
15519 # attributes can be removed.
15520 # Mapping to ASCII character set ('acsc' capability) can also be
15521 # restored if needed.
15522 ncr260vppp|NCR 2900_260 viewpoint,
15523 am, bw, hs, km, mc5i, mir, msgr, xon,
15524 cols#80, lines#24, nlab#32, xmc#1,
15525 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15526 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
15527 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
15528 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
15529 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
15530 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
15531 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
15532 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15533 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
15534 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
15535 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
15536 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
15537 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
15538 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
15539 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
15540 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
15541 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15542 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
15543 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
15544 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
15545 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
15546 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15547 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15548 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
15549 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
15550 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
15552 cup=\Ea%i%p1%dR%p2%dC$<30>,
15553 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15554 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15556 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
15557 am, hs, mir, msgr, xenl, xon,
15558 cols#80, lines#24, nlab#32,
15559 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15560 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15561 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15562 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
15563 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15564 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15565 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15566 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15567 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15568 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
15569 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
15570 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
15571 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
15573 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15574 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15575 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
15576 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
15577 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
15578 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
15579 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15581 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15582 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
15583 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
15584 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
15585 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
15587 cup=\E[%i%p1%d;%p2%dH$<30>,
15588 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15589 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15591 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
15592 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15593 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15594 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15595 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
15596 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
15597 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15598 smkx=\E=, use=ncr260vt100an,
15599 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
15601 cup=\E[%i%p1%d;%p2%dH$<30>,
15602 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15603 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15605 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
15606 am, hs, mir, msgr, xenl, xon,
15607 cols#80, lines#24, nlab#32,
15608 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15609 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15610 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15611 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15612 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15613 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15614 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15615 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15616 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15617 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15618 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15619 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15620 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15621 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15622 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15623 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15624 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15625 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15626 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
15627 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
15628 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
15629 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
15630 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
15631 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
15632 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
15633 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
15634 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
15635 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
15636 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15638 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15639 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15640 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15641 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15643 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
15645 cup=\E[%i%p1%d;%p2%dH$<30>,
15646 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15647 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15649 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
15650 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15651 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15652 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15653 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15655 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
15657 cup=\E[%i%p1%d;%p2%dH$<30>,
15658 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15659 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15661 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
15662 am, hs, mir, msgr, xenl, xon,
15663 cols#80, lines#24, nlab#32,
15664 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15665 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15666 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15667 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15668 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15669 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15670 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15671 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15672 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15673 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15674 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15675 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15676 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15677 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15678 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15679 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15680 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15681 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15682 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
15683 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
15684 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
15685 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
15686 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
15687 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15688 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
15689 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
15690 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
15692 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15694 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15695 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15696 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15697 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15699 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
15701 cup=\E[%i%p1%d;%p2%dH$<30>,
15702 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15703 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15705 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
15706 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15707 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15708 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15709 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15711 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
15713 cup=\E[%i%p1%d;%p2%dH$<30>,
15714 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15715 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15717 # This terminfo file contains color capabilities for the Wyse325 emulation of
15718 # the NCR 2900/260C color terminal. Because of the structure of the command
15719 # (escape sequence) used to set color attributes, one of the fore/background
15720 # colors must be preset to a given value. I have set the background color to
15721 # black. The user can change this setup by altering the last section of the
15722 # 'setf' definition. The escape sequence to set color attributes is
15723 # ESC d y <foreground_color> <background_color> 1
15724 # In addition, the background color can be changed through the desk accessories.
15725 # The capablitiy 'op' sets colors to green on black (default combination).
15727 # NOTE: The NCR Unix System Administrator's Shell will not function properly
15728 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
15729 # capability and recompile if you wish to have it included.
15731 ncr260wy325pp|NCR 2900_260 wyse 325,
15732 am, bw, hs, km, mc5i, mir, msgr, xon,
15733 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15734 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15735 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15736 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15737 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15738 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15739 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15740 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15741 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15742 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15743 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15744 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15745 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15746 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15747 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15748 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15749 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15750 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15751 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15752 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15753 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15754 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15755 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15756 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15758 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15759 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15760 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15762 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15764 cup=\Ea%i%p1%dR%p2%dC$<30>,
15765 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15766 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15768 # This definition for Wyse 350 supports several attributes. This means
15769 # that it has magic cookies (extra spaces where the attributes begin).
15770 # Some applications do not function well with magic cookies. The System
15771 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15772 # If supporting various attributes is not vital, 'xmc#1' and the extra
15773 # attributes can be removed.
15774 # Mapping to ASCII character set ('acsc' capability) can also be
15775 # restored if needed.
15776 # In addition, color capabilities have been added to this file. The drawback,
15777 # however, is that the background color has to be black. The foreground colors
15778 # are numbered 0 through 15.
15780 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15781 # with the 'pairs' capability defined as below. If you wish to
15782 # have it included, Un-comment it and recompile (using 'tic').
15784 ncr260wy350pp|NCR 2900_260 wyse 350,
15785 am, bw, hs, km, mc5i, mir, msgr, xon,
15786 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15787 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15788 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15789 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15790 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15791 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15792 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15793 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15794 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15795 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15796 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15797 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15798 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15799 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15800 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15801 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15802 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15803 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15804 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15805 mc0=\EP$<10>, mc4=^T, mc5=^R,
15806 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15807 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15808 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15809 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15811 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15812 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15813 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15815 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15817 cup=\Ea%i%p1%dR%p2%dC$<30>,
15818 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15819 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15821 # This definition for Wyse 50+ supports several attributes. This means
15822 # that it has magic cookies (extra spaces where the attributes begin).
15823 # Some applications do not function well with magic cookies. The System
15824 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15825 # If supporting various attributes is not vital, 'xmc#1' and the extra
15826 # attributes can be removed.
15827 # Mapping to ASCII character set ('acsc' capability) can also be
15828 # restored if needed.
15829 # (ncr260wy50+pp: originally contained commented-out
15830 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15831 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15832 am, bw, hs, km, mc5i, mir, msgr, xon,
15833 cols#80, lines#24, nlab#32, xmc#1,
15834 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15835 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15836 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15837 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15838 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15839 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15840 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15842 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15843 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15844 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15845 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15846 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15847 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15848 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15849 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15850 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15851 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15852 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15853 mc0=\EP$<10>, mc4=^T, mc5=^R,
15854 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15855 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15856 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15857 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15858 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15859 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15860 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15862 cup=\Ea%i%p1%dR%p2%dC$<30>,
15863 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15864 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15866 ncr260wy60pp|NCR 2900_260 wyse 60,
15867 am, bw, hs, km, mc5i, mir, msgr, xon,
15868 cols#80, lines#24, nlab#32,
15869 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15870 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15871 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15872 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15873 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15874 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15875 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15877 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15878 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15879 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15880 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15881 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15882 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15883 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15884 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15885 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15886 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15887 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15888 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15889 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15890 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15891 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15892 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15893 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15894 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15896 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15898 cup=\Ea%i%p1%dR%p2%dC$<30>,
15899 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15900 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15902 ncr160vppp|NCR 2900_160 viewpoint,
15904 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15906 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15908 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15910 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15911 use=ncr260vt100wan,
15912 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15913 use=ncr260vt100wpp,
15914 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15916 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15918 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15919 use=ncr260vt200wan,
15920 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15921 use=ncr260vt200wpp,
15922 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15924 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15926 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15927 use=ncr260vt300wan,
15928 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15929 use=ncr260vt300wpp,
15930 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15932 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15933 use=ncr260wy50+wpp,
15934 ncr160wy60pp|NCR 2900_160 wyse 60,
15936 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15938 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15939 am, hs, mc5i, mir, msgr, xon,
15940 cols#80, it#8, lines#24, nlab#32,
15941 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15942 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15943 clear=\E[2J\E[1;1H$<300>, cr=^M,
15944 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15945 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15946 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15947 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15948 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15949 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15950 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15951 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15952 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15954 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15955 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15956 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15957 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15958 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15959 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15960 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15962 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15963 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15964 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15966 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15968 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15969 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15972 # Vendor-supplied NCR termcaps end here
15974 # NCR7900 DIP switches:
15978 # 5 - Parity (Odd/Even)
15979 # 6 - Don't Send or Do Send Spaces
15980 # 7 - Parity Enable
15981 # 8 - Stop Bits (One/Two)
15984 # 1 - Upper/Lower Shift
15985 # 2 - Typewriter Shift
15986 # 3 - Half Duplex / Full Duplex
15987 # 4 - Light/Dark Background
15988 # 5-6 - Carriage Return Without / With Line Feed
15989 # 7 - Extended Mode
15990 # 8 - Suppress Keyboard Display
15993 # 1 - End of line entry disabled/enabled
15994 # 2 - Conversational mode / (Local?) Mode
15995 # 3 - Control characters displayed / not displayed
15996 # 4 - (2-wire?) / 4-wire communications
15997 # 5 - RTS on and off for each character
15998 # 6 - (50Hz?) / 60 Hz
15999 # 7 - Exit after level zero diagnostics
16000 # 8 - RS-232 interface
16003 # 1 - Reverse Channel (yes / no)
16004 # 2 - Manual answer (no / yes)
16005 # 3-4 - Cursor appearance
16006 # 5 - Communication Rate
16007 # 6 - Enable / Disable EXT turnoff
16008 # 7 - Enable / Disable CR turnoff
16009 # 8 - Enable / Disable backspace
16011 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
16012 # reverse, blink, dim, and underline) the appropriate number of bits (by
16013 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
16014 # '@' is (effectively) "or"ed with each attribute to generate the proper third
16015 # character in the <ESC>0 sequence. The <sgr> string implements the following
16018 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
16019 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
16021 # Where: P1 <==> Standout attribute parameter
16022 # P2 <==> Underline attribute parameter
16023 # P3 <==> Reverse attribute parameter
16024 # P4 <==> Blink attribute parameter
16025 # P5 <==> Dim attribute parameter
16026 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
16027 ncr7900i|ncr7900|ncr 7900 model 1,
16029 cols#80, lines#24, xmc#1,
16030 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16031 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
16032 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
16033 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
16035 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
16036 sgr0=\E0@, smso=\E0Q, smul=\E0`,
16037 ncr7900iv|ncr 7900 model 4,
16040 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
16041 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
16042 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
16043 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
16044 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
16045 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
16046 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
16047 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
16048 # The user can enter a CTRL-B to get out of this locked state.
16049 # In <hpa>, we want to output the character given by the formula:
16050 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
16051 ncr7901|ncr 7901 model,
16054 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
16055 cub1=^H, cud1=^J, cuf1=^F,
16056 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
16058 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
16059 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
16060 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
16061 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
16062 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
16063 vpa=\013%p1%{64}%+%c,
16065 # Newbury Data Recording Limited (Newbury Data)
16067 # Have been manufacturing and reselling various peripherals for a long time
16068 # They don't make terminals anymore, but are still in business (in 2007).
16069 # Their e-mail address is at ndsales@newburydata.co.uk
16070 # and their post address is:
16072 # Newbury Data Recording Ltd,
16073 # Premier Park, Road One,
16074 # Winsford, Cheshire, CW7 3PT
16076 # Their technical support is still good, they sent me for free a printed copy
16077 # of the 9500 user manual and I got it just 1 week after I first contacted them
16081 # Manufactured in the early/mid eighties, behaves almost the same as a
16082 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
16083 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
16084 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
16085 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
16086 # recognized: if you type in "ESC !", the next (third) character is not
16087 # echoed, showing that the terminal was actually waiting for a parameter!
16088 ndr9500|nd9500|Newbury Data 9500,
16089 am, bw, hs, mc5i, mir, msgr, ul, xon,
16090 cols#80, lines#24, wsl#79,
16091 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
16092 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
16093 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16094 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
16095 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
16096 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
16097 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
16098 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
16099 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16100 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
16101 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
16102 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16103 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16104 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
16105 pfloc=\E|%{48}%p1%+%c2%p2\031,
16106 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
16107 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
16108 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
16109 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
16110 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
16112 ndr9500-nl|NDR 9500 with no status line,
16115 dsl@, fsl@, tsl@, use=ndr9500,
16117 ndr9500-25|NDR 9500 with 25th line enabled,
16118 lines#25, use=ndr9500,
16120 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
16121 lines#25, use=ndr9500-nl,
16123 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
16126 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
16127 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
16128 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
16130 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
16131 lines#25, use=ndr9500-mc,
16133 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
16136 dsl@, fsl@, tsl@, use=ndr9500-mc,
16138 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
16139 lines#25, use=ndr9500-mc-nl,
16141 #### Perkin-Elmer (Owl)
16143 # These are official terminfo entries from within Perkin-Elmer.
16146 bantam|pe550|pe6100|perkin elmer 550,
16149 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16150 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16151 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
16152 fox|pe1100|perkin elmer 1100,
16155 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16156 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16157 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
16158 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
16159 owl|pe1200|perkin elmer 1200,
16162 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16163 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16164 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16165 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16166 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
16167 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16168 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16169 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
16170 pe1251|pe6300|pe6312|perkin elmer 1251,
16172 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
16173 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
16174 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16175 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
16176 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
16177 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
16178 # (pe7000m: this had
16179 # rmul=\E!\0, smul=\E!\040,
16180 # which is probably wrong, it collides with kf0
16181 pe7000m|perkin elmer 7000 series monochrome monitor,
16184 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
16185 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16186 ed=\EJ, el=\EI, home=\EH, ind=^J,
16187 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
16188 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
16189 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
16190 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
16192 pe7000c|perkin elmer 7000 series colour monitor,
16193 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
16194 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
16198 # Sperry Univac has merged with Burroughs to form Unisys.
16201 # This entry is for the Sperry UTS30 terminal running the TTY
16202 # utility under control of CP/M Plus 1R1. The functionality
16203 # provided is comparable to the DEC vt100.
16204 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
16205 uts30|sperry uts30 with cp/m@1R1,
16207 cols#80, lines#24, wsl#40,
16208 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16209 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
16210 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
16211 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16212 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16213 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
16214 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
16215 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
16216 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
16217 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
16218 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
16219 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
16220 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16221 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
16222 smul=\E[4m, tsl=\E], uc=\EPB,
16226 # Tandem builds these things for use with its line of fault-tolerant
16227 # transaction-processing computers. They aren't generally available
16228 # on the merchant market, and so are fairly uncommon.
16231 tandem6510|adm3a repackaged by Tandem,
16234 # A funny series of terminal that TANDEM uses. The actual model numbers
16235 # have a fourth digit after 653 that designates minor variants. These are
16236 # natively block-mode and rather ugly, but they have a character mode which
16237 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
16238 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
16239 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
16240 tandem653|t653x|Tandem 653x multipage terminal,
16241 OTbs, am, da, db, hs,
16242 cols#80, lines#24, wsl#64, xmc#1,
16243 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
16244 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
16245 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
16246 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
16248 #### Tandy/Radio Shack
16250 # Tandy has a line of VDTs distinct from its microcomputers.
16253 dmterm|deskmate terminal,
16256 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
16257 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16258 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
16259 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
16260 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
16261 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
16262 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
16263 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
16265 dt100|dt-100|Tandy DT-100 terminal,
16267 cols#80, lines#24, xmc#1,
16268 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16269 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16270 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16271 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
16272 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
16273 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
16274 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
16275 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
16276 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
16277 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
16278 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
16279 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
16280 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
16281 cols#132, use=dt100,
16282 dt110|Tandy DT-110 emulating ansi,
16285 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16286 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16287 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16288 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
16289 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
16290 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
16291 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
16292 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
16293 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
16294 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
16295 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
16296 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16297 smacs=^N, smso=\E[7m, smul=\E[4m,
16298 pt210|TRS-80 PT-210 printing terminal,
16301 bel=^G, cr=^M, cud1=^J, ind=^J,
16303 #### Tektronix (tek)
16305 # Tektronix tubes are graphics terminals. Most of them use modified
16306 # oscilloscope technology incorporating a long-persistence green phosphor,
16307 # and support vector graphics on a main screen with an attached "dialogue
16308 # area" for interactive text.
16311 tek|tek4012|tektronix 4012,
16314 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
16315 ff=\014$<1000>, is2=\E^O,
16316 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16317 tek4013|tektronix 4013,
16318 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
16319 tek4014|tektronix 4014,
16321 is2=\E\017\E9, use=tek4012,
16322 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16323 tek4015|tektronix 4015,
16324 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
16325 tek4014-sm|tektronix 4014 in small font,
16326 cols#121, lines#58,
16327 is2=\E\017\E\:, use=tek4014,
16328 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16329 tek4015-sm|tektronix 4015 in small font,
16330 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
16331 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
16333 # You need to have "stty nl2" in effect. Some versions of tset(1) know
16334 # how to set it for you.
16336 # It's got the Magic Cookie problem around stand-out mode. If you can't
16337 # live with Magic Cookie, remove the :so: and :se: fields and do without
16338 # reverse video. If you like reverse video stand-out mode but don't want
16339 # it to flash, change the letter 'H' to 'P' in the :so: field.
16340 tek4023|tektronix 4023,
16342 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
16343 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
16344 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
16345 rmso=^_@, smso=^_P,
16346 # It is recommended that you run the 4025 at 4800 baud or less;
16347 # various bugs in the terminal appear at 9600. It wedges at the
16348 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
16349 # on keyboard don't work. You have to hit BREAK twice to get
16350 # one break at any speed - this is a documented feature.
16351 # Can't use cursor motion because it's memory relative, and
16352 # because it only works in the workspace, not the monitor.
16353 # Same for home. Likewise, standout only works in the workspace.
16355 # <el> was commented out since vi and rogue seem to work better
16356 # simulating it with lots of spaces!
16358 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
16359 # and didn't seem necessary.
16361 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
16363 cols#80, it#8, lines#34, lm#0,
16364 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
16365 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
16366 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
16367 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
16368 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
16369 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
16370 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
16372 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16373 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
16374 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
16375 tek4025-17|tek 4025 17 line window,
16376 lines#17, use=tek4025,
16377 tek4025-17-ws|tek 4025 17 line window in workspace,
16378 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
16379 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
16380 smso=\037att e\r, use=tek4025-17,
16381 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
16382 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
16383 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16385 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
16386 # The following status modes are assumed for normal operation (replace the
16387 # initial "!" by whatever the current command character is):
16388 # !COM 29 # NOTE: changes command character to GS (^])
16394 # ^]STO 9 17 25 33 41 49 57 65 73
16395 # Other modes may be set according to communication requirements.
16396 # If the command character is inadvertently changed, termcap can't restore it.
16397 # Insert-character cannot be made to work on both top and bottom rows.
16398 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
16399 # There also seems to be a problem with vertical motion, perhaps involving
16400 # delete/insert-line, following a typed carriage return. This terminal sucks.
16401 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16402 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
16403 # work any more. -- esr)
16404 tek4025a|Tektronix 4025A,
16405 OTbs, OTpt, am, bw, da, db, xon,
16406 cols#80, it#8, lines#34,
16407 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
16408 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
16409 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
16410 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
16411 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
16412 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
16413 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
16414 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
16416 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
16417 # Here's the command file that I use to get rogue to work on the 4025.
16418 # It should work with any program using the old curses (e.g. it better
16419 # not try to scroll, or cursor addressing won't work. Also, you can't
16421 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
16422 tek4025-cr|tek 4025 for curses and rogue,
16424 cols#80, it#8, lines#33,
16425 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
16426 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
16427 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16428 rmcup=\037wor 0, smcup=\037wor 33h,
16429 # next two lines commented out since curses only allows 128 chars, sigh.
16430 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
16431 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
16432 tek4025ex|4025ex|4027ex|tek 4025 w/!,
16433 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
16434 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16435 tek4105|tektronix 4105,
16436 OTbs, am, mir, msgr, ul, xenl, xt,
16437 cols#79, it#8, lines#29,
16438 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
16439 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
16440 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
16441 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16442 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
16443 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
16444 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
16445 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
16446 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
16447 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16448 smul=\E[=5;<2m, tbc=\E[1g,
16450 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
16451 tek4105-30|4015 emulating 30 line vt100,
16452 am, mir, msgr, xenl, xon,
16453 cols#80, it#8, lines#30, vt#3,
16454 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16455 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
16456 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16457 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16458 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16459 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16460 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
16461 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
16462 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
16463 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16464 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
16465 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16466 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
16467 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
16468 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
16471 # Tektronix 4105 from BRL
16472 # The following setup modes are assumed for normal operation:
16473 # CODE ansi CRLF no DABUFFER 141
16474 # DAENABLE yes DALINES 30 DAMODE replace
16475 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
16476 # FLAGGING input INSERTREPLACE replace LFCR no
16477 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
16478 # SELECTCHARSET G1 0 TABS -2
16479 # Other setup modes may be set for operator convenience or communication
16480 # requirements; I recommend
16481 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16482 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16483 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16484 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
16485 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16486 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
16488 # and factory color maps. After setting these modes, save them with NVSAVE. No
16489 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16490 # "IC" cannot be used in combination with "im" & "ei".
16491 # "tek4105a" is just a guess:
16492 tek4105a|Tektronix 4105,
16493 OTbs, OTpt, msgr, xon,
16494 OTkn#8, cols#80, it#8, lines#30, vt#3,
16495 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16496 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16497 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16498 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16499 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16500 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16501 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16502 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16503 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16504 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16505 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16506 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16507 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16508 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16509 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16510 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16511 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16512 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16515 # Tektronix 4106/4107/4109 from BRL
16516 # The following setup modes are assumed for normal operation:
16517 # CODE ansi COLUMNMODE 80 CRLF no
16518 # DABUFFER 141 DAENABLE yes DALINES 32
16519 # DAMODE replace DAVISIBILITY yes ECHO no
16520 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
16521 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
16522 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
16524 # Other setup modes may be set for operator convenience or communication
16525 # requirements; I recommend
16526 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16527 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16528 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16529 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
16530 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16531 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
16533 # and factory color maps. After setting these modes, save them with NVSAVE. No
16534 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16535 # "IC" cannot be used in combination with "im" & "ei".
16536 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
16538 cols#80, it#8, lines#32, vt#3,
16539 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16540 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16541 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16542 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16543 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16544 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16545 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16546 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16547 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16548 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16549 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16550 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16551 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16552 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16553 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16554 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16555 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16556 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
16558 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
16559 # 0 selects Tek mode, i.e., \E%!0
16560 # 1 selects ANSI mode
16561 # 2 selects ANSI edit-mode
16562 # 3 selects VT52 mode
16564 # One odd thing about the description (which has been unchanged since the 90s)
16565 # is that the cursor addressing is using VT52 mode, and a few others use the
16566 # VT52's non-CSI versions of ANSI, e.g., \EJ.
16567 tek4107|tek4109|tektronix terminals 4107 4109,
16568 OTbs, am, mir, msgr, ul, xenl, xt,
16569 cols#79, it#8, lines#29,
16570 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
16571 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
16572 cub1=^H, cud1=^J, cuf1=\EC,
16573 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
16574 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
16575 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16576 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
16577 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
16578 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
16579 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
16580 smul=\E%!1\E[4m$<2>\E%!0,
16581 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
16582 # see the note attached to tek4207.
16583 tek4207-s|Tektronix 4207 with sysline but no memory,
16585 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
16586 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16587 is2=\E7\E[?6l\E[2K\E[?6h\E8,
16588 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
16590 # The 4110 series may be a wonderful graphics series, but they make the 4025
16591 # look good for screen editing. In the dialog area, you can't move the cursor
16592 # off the bottom line. Out of the dialog area, ^K moves it up, but there
16593 # is no way to scroll.
16595 # Note that there is a floppy for free from Tek that makes the
16596 # 4112 emulate the vt52 (use the vt52 termcap). There is also
16597 # an expected enhancement that will use ANSI standard sequences.
16599 # 4112 in non-dialog area pretending to scroll. It really wraps
16600 # but vi is said to work (more or less) in this mode.
16602 # 'vi' works reasonably well with this entry.
16604 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
16607 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
16608 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
16609 # The 4112 with the ANSI compatibility enhancement
16610 tek4112|tek4114|tektronix 4110 series,
16613 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
16614 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
16615 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
16616 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
16617 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16618 tek4112-nd|4112 not in dialog area,
16620 cuu1=^K, use=tek4112,
16621 tek4112-5|4112 in 5 line dialog area,
16622 lines#5, use=tek4112,
16623 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
16624 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
16625 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
16626 # previously \0410 and \0411 sequences...I don't *think* they were supposed
16627 # to be 4-digit octal -- esr)
16628 tek4113|tektronix 4113 color graphics with 5 line dialog area,
16631 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
16632 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16633 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
16634 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
16636 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
16637 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
16638 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
16639 # :vb: needs enough delay to let you see the background color being toggled.
16640 tek4113-nd|tektronix 4113 color graphics with no dialog area,
16642 cols#80, it#8, lines#34,
16643 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
16645 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16646 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
16647 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
16648 # This entry is from Tek. Inc. (Brian Biehl)
16649 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
16650 otek4115|Tektronix 4115,
16651 OTbs, am, da, db, eo,
16652 cols#80, it#8, lines#34,
16653 cbt=\E[Z, clear=\E[H\E[2J,
16654 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
16655 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16656 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
16657 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
16659 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
16660 kbs=^H, ri=\EM, rmam=\E[?7l,
16661 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
16662 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
16663 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
16665 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
16668 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16669 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16670 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16671 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16672 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
16673 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
16674 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
16675 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
16676 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
16677 rmso=\E[m, rmul=\E[m,
16678 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
16679 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16680 vpa=\E[%p1%{1}%+%dd,
16681 # The tek4125 emulates a vt100 incorrectly - the scrolling region
16682 # command is ignored. The following entry replaces <csr> with the needed
16683 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
16684 # chokes on; and adds a lot of initialization for the tek dialog area.
16685 # Note that this entry uses all 34 lines and sets the cursor color to green.
16686 # Steve Jacobson 8/85
16687 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
16688 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
16689 tek4125|tektronix 4125,
16691 csr@, dl1=\E[1M, il1=\E[1L,
16692 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16693 rc@, sc@, smkx=\E=, use=vt100,
16695 # From: <jcoker@ucbic>
16696 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
16697 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
16698 # note that if jcoker wasn't confused you may be able to use this one.
16699 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
16700 tek4207|Tektronix 4207 graphics terminal with memory,
16701 am, bw, mir, msgr, ul, xenl,
16702 cols#80, it#8, lines#32,
16703 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
16704 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16705 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
16706 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
16707 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
16708 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16709 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
16710 rev=\E[7m, ri=\E[T,
16711 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
16712 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
16713 smul=\E[4m, tbc=\E[1g,
16715 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
16716 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
16717 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
16718 tek4404|tektronix 4404,
16720 cols#80, it#8, lines#32,
16721 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
16722 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
16723 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
16724 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
16725 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
16726 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
16727 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
16728 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
16729 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
16730 # Some unknown person wrote:
16731 # I added the is string - straight Unix has ESC ; in the login
16732 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
16733 # mode). The is string here cleans up a few things (but not
16735 ct8500|tektronix ct8500,
16738 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
16739 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16740 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16741 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16742 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16744 # Tektronix 4205 terminal.
16746 # am is not defined because the wrap around occurs not when the char.
16747 # is placed in the 80'th column, but when we are attempting to type
16748 # the 81'st character on the line. (esr: hmm, this is like the vt100
16749 # version of xenl, perhaps am + xenl would work!)
16751 # Bold, dim, and standout are simulated by colors and thus not allowed
16752 # with colors. The tektronix color table is mapped into the RGB color
16753 # table by setf/setb. All colors are reset to factory specifications by oc.
16754 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16755 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16756 # interval then maps into pre-defined value.
16757 tek4205|tektronix 4205,
16759 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16760 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16761 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16762 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16763 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16764 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16765 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
16766 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
16767 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
16769 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16770 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16771 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16772 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16774 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16775 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16776 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16777 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16778 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16779 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16780 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16781 smul=\E[4m, tbc=\E[1g,
16783 #### Teletype (tty)
16785 # These are the hardcopy Teletypes from before AT&T bought the company,
16786 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16787 # pulpy yellow roll paper. If you remember these you go back a ways.
16788 # Teletype-branded VDTs are listed in the AT&T section.
16790 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16791 # other programs still default to emitting codes for the Model 37.
16794 tty33|tty35|model 33 or 35 teletype,
16797 bel=^G, cr=^M, cud1=^J, ind=^J,
16798 tty37|model 37 teletype,
16800 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16803 # There are known to be at least three flavors of the tty40, all seem more
16804 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16805 # awful braindamage, such as printing a visible newline indicator after each
16806 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16807 # braindamaged but has hope and is described here. The 40-4 is a 3270
16808 # lookalike and beyond hope. The terminal has visible bell but I don't know
16809 # it - it's null here to prevent it from showing the BL character.
16810 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16811 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16812 # to get crlf, even if <cr> is not ^M.)
16813 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16814 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16817 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16818 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16819 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16820 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16821 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16822 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16823 tty43|model 43 teletype,
16824 OTbs, am, hc, os, xon,
16826 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16831 # You can add <is2=\E<> to put this 40-column mode, though I can't
16832 # for the life of me think why anyone would want to.
16833 scanset|sc410|sc415|Tymshare Scan Set,
16836 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16837 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16838 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16839 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16840 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16842 #### Volker-Craig (vc)
16844 # If you saw a Byte Magazine cover with a terminal on it during the early
16845 # 1980s, it was probably one of these. Carl Helmers liked them because
16846 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16847 # to program one...)
16850 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16851 # every other linefeed.
16852 vc303|vc103|vc203|volker-craig 303,
16855 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16856 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16857 kcuu1=^N, ll=\017$<1>W,
16858 vc303a|vc403a|volker-craig 303a,
16859 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16860 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16861 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16862 vc404|volker-craig 404,
16865 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16866 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16867 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16868 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16869 vc404-s|volker-craig 404 w/standout mode,
16870 cud1=^J, rmso=^O, smso=^N, use=vc404,
16871 # From: <wolfgang@cs.sfu.ca>
16872 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16873 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16876 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16877 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16878 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16879 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16880 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16881 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16882 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16883 rmso=\E^_, smso=\E^Y,
16884 vc415|volker-craig 415,
16885 clear=^L, use=vc404,
16887 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16890 #### IBM PC and clones
16893 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16894 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16895 # doesn't support scrolling regions, ignores add line commands, and ignores
16896 # delete line commands. Consequently, the resulting behavior looks like a
16897 # crude adm3a-type terminal.
16898 # Steve Jacobson 8/85
16899 pcplot|pc-plot terminal emulation program,
16901 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16902 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16903 # I've found that my KayPro II, running MDM730, continues to emulate an
16904 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16905 # system the following termcap entry works well:
16906 # I have noticed a couple of minor glitches, but nothing I can't work
16907 # around. (I added two capabilities from the BRL entry -- esr)
16908 kaypro|kaypro2|kaypro II,
16911 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16912 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16913 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16915 # From IBM, Thu May 5 19:35:27 1983
16916 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16917 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16920 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16921 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16923 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16924 OTbs, am, bw, eo, hs, km, msgr, ul,
16925 cols#80, it#8, lines#24,
16926 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16927 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16928 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16929 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16930 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16931 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16932 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16933 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16934 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16935 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16936 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16937 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16938 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16939 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
16940 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16944 # Apple II firmware console first, then various 80-column cards and
16945 # terminal emulators. For two cents I'd toss all these in the UFO file
16946 # along with the 40-column apple entries.
16949 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16950 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16951 # function of TIC, not the firmware.
16952 # The clear key on a IIgs will do something like clear-screen,
16953 # depending on what you're in.
16954 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16955 OTbs, am, bw, eo, msgr,
16956 cols#80, it#8, lines#24,
16957 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16958 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16959 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16960 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16962 # Apple //e with 80-column card, entry from BRL
16963 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16964 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16965 # Auto-wrap does not work right due to newline scrolling delay, which also
16966 # requires that you set "stty cr2".
16967 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16968 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16969 # using a terminal emulation program instead of the built-in firmware.
16973 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16974 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16975 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16976 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16978 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16979 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16980 apple2e-p|Apple //e via Pascal,
16981 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16982 kcud1=^J, use=apple2e,
16983 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16984 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16985 apple-ae|ASCII Express,
16986 OTbs, am, bw, msgr, nxon, xon,
16987 cols#80, it#8, lines#24,
16988 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16989 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16990 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16991 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16993 appleII|apple ii plus,
16995 cols#80, it#8, lines#24,
16996 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
16997 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
16998 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
16999 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
17001 # Originally by Gary Ford 21NOV83
17002 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
17003 apple-80|apple II with smarterm 80 col,
17006 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
17007 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
17008 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
17009 apple-soroc|apple emulating soroc 120,
17012 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17013 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
17014 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
17015 # From Peter Harrison, Computer Graphics Lab, San Francisco
17016 # ucbvax!ucsfmis!harrison .....uucp
17017 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
17018 # "These two work. If you don't have the inverse video chip for the
17019 # Apple with videx then remove the :so: and :se: fields."
17020 # (apple-videx: this used to be called DaleApple -- esr)
17021 apple-videx|Apple with videx videoterm 80 column board with inverse video,
17023 cols#80, it#8, lines#24,
17024 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
17025 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17026 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
17027 rmso=^Z2, sgr0=^Z2, smso=^Z3,
17028 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
17029 # Apple Cat ][ 212 modem, + more all
17030 # controlled by ASCII Express: Pro.
17031 # From Dave Shaver <isucs1!shaver>
17032 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
17035 acsc=, clear=^L, cuf1=^\,
17036 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17037 flash=^W35^W06, home=^Y,
17038 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
17040 apple-uterm|Ultraterm for Apple micros,
17043 acsc=, clear=^L, cuf1=^\,
17044 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17045 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
17046 # from trwrba!bwong (Bradley W. Wong):
17048 # This entry assumes that you are using an apple with the UCSD Pascal
17049 # language card. SYSTEM.MISCINFO is assumed to be the same as that
17050 # supplied with the standard apple except that screenwidth should be set
17051 # using SETUP to 80 columns. Note that the right arrow is not mapped in
17052 # this termcap entry. This is because that key, on the Apple, transmits
17053 # a ^U and would thus preempt the more useful "up" function of vi.
17056 apple80p|80-column apple with Pascal card,
17059 clear=^Y^L, cuf1=^\\:,
17060 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17063 # Apple II+ equipped with Videx 80 column card
17065 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
17066 # manually converted by D A Gwyn
17068 # DO NOT use any terminal emulation with this data base, it works directly
17069 # with the Videx card. This has been tested with vi 1200 baud and works fine.
17071 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
17072 # 1 screen, while in R2 ^U doesn't.
17073 # For inverse alternate character set add:
17074 # <smacs>=^O:<rmacs>=^N:
17075 # (apple-v: added it#8 -- esr)
17076 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
17078 cols#80, it#8, lines#24,
17079 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
17080 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
17081 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
17082 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
17083 khome=^Y, rmso=^Z2, smso=^Z3,
17084 apple-videx3|vapple|Apple II with 80 col card,
17087 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
17088 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
17089 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17090 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
17091 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
17092 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
17093 aepro|Apple II+ running ASCII Express Pro--vt52,
17096 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
17097 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17099 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
17100 apple-vm80|ap-vm80|apple with viewmax-80,
17103 clear=\014$<300/>, cuf1=^\\:,
17104 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
17105 ed=\013$<300/>, el=^], home=\031$<200/>,
17107 #### Apple Lisa & Macintosh
17110 # (lisa: changed <cvvis> to <cnorm> -- esr)
17111 lisa|apple lisa console display (black on white),
17112 OTbs, am, eo, msgr,
17113 cols#88, it#8, lines#32,
17114 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
17115 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
17116 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17117 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
17118 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
17119 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
17120 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
17121 liswb|apple lisa console display (white on black),
17122 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
17123 smso=\E[m, smul=\E[4m, use=lisa,
17125 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
17126 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
17128 # These entries assume that the 'Auto Wraparound' is enabled.
17129 # Xon-Xoff flow control should also be enabled.
17131 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
17132 # settings are in non-volatile memory and don't need to be reset upon login.
17133 # Also setting the number of columns glitches the screen annoyingly.
17134 # You can type "reset" to get them set.
17136 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
17137 OTbs, OTpt, am, xenl, xon,
17138 OTkn#4, cols#80, it#8, lines#24, vt#3,
17139 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
17140 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17141 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17142 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
17143 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
17144 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
17145 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
17146 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17147 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
17148 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17150 # Lisaterm in 132 column ("wide") mode.
17151 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
17153 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
17154 # Although MacTerminal has insert/delete line, it is commented out here
17155 # since it is much faster and cleaner to use the "lock scrolling region"
17156 # method of inserting and deleting lines due to the MacTerminal implementation.
17157 # Also, the "Insert/delete ch" strings have an extra character appended to them
17158 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
17159 # supported by MacTerminal.
17160 mac|macintosh|Macintosh with MacTerminal,
17163 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
17164 # Lisaterm in 132 column ("wide") mode.
17165 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
17168 # nsterm*|Apple_Terminal - AppKit Terminal.app
17170 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
17171 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
17172 # Server and Mac OS X operating systems. There is also a
17173 # "terminal.app" in GNUStep, but I believe it to be an unrelated
17174 # codebase and I have not attempted to describe it here.
17176 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
17177 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
17178 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
17179 # version supports color.
17181 # To determine the version of Terminal.app you're using by running:
17183 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
17185 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
17187 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
17189 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
17191 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
17193 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
17195 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
17196 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
17197 # might work too, but really you're on your own here since these
17198 # systems are very obsolete and I can't test them. I do welcome
17199 # patches, though :).
17203 # For GNUstep_Terminal, you're probably best off using "linux" or
17204 # writing your own terminfo.
17206 # For MacTelnet, you're on your own. It's a different codebase, and
17207 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
17209 # For iTerm.app, see "iterm".
17212 # The AppKit Terminal.app descriptions all have names beginning with
17213 # "nsterm". Note that the statusline (-s) versions use the window
17214 # titlebar as a phony status line, and may produce warnings during
17215 # compilation as a result ("tsl uses 0 parameters, expected 1".)
17216 # Ignore these warnings, or even ignore these entries entirely. Apps
17217 # which need to position the cursor or do other fancy stuff inside the
17218 # status line won't work with these entries. They're primarily useful
17219 # for programs like Pine which provide simple notifications in the
17220 # status line. Please note that non-ASCII characters don't work right
17221 # in the status line, since Terminal.app incorrectly interprets their
17222 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
17223 # versions) or only accepts status lines consisting entirely of
17224 # characters from the first 256 Unicode positions (including C1 but
17227 # The Mythology* of AppKit Terminal.app:
17229 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
17230 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
17231 # shareware replacement for Terminal called "Stuart" which NeXT bought
17232 # and used as the basis for the Terminal.app in NeXTstep 2+,
17233 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
17234 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
17235 # capabilities for the early versions, but I believe that the
17236 # TERM_PROGRAM_VERSION may have been reset at some point.
17238 # The early versions were tailored to the NeXT character set. Sometime
17239 # after the Apple aquisition the encoding was swiched to MacRoman
17240 # (initally with serious altcharset bugs due to incomplete conversion
17241 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
17242 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
17243 # 8-color support (initially buggy when combined with attributes, but
17244 # that was later fixed.) More recently, around Mac OS X version 10.3
17245 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
17246 # some versions (for instance 133-1 which shipped with Mac OS X
17247 # version 10.4) this suffered from the <bce> bug, but that seems to
17248 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
17250 # In the early days of Mac OS X the terminal was fairly buggy and
17251 # would routinely crash under load. Many of these bugs seem to have
17252 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
17253 # some may still remain. This change seems to correspond to
17254 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
17255 # it did previously.
17257 # * This may correspond with what actually happened, but I don't
17258 # know. It is based on guesswork, hearsay, private correspondence,
17259 # my faulty memory, and the following online sources and references:
17261 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
17262 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
17264 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
17265 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
17267 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
17268 # "nsterm" to comply with the name length and case conventions and
17269 # limitations of various software packages [notably Solaris terminfo
17270 # and UNIX.] A single Apple_Terminal alias is retained for
17271 # backwards-compatbility.
17273 # * Added function key support (F1-F4). These only work in Terminal.app
17274 # version 51, hopefully the capabilities won't cause problems for people
17275 # using version 41.
17277 # * Added "full color" (-c) entries which support the 16-color mode in
17280 # * By default, version 51 uses UTF-8 encoding with broken altcharset
17281 # support, so "ASCII" (-7) entries without altcharset support were
17284 # nsterm - AppKit Terminal.app
17286 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
17287 # Terminal.app. It is a partial VT100 emulation with some xterm-like
17288 # extensions. This terminfo was written to describe versions 41
17289 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
17290 # version 10.1) of Terminal.app.
17292 # Terminal.app runs under the Mac OS X Quartz windowing system (and
17293 # other AppKit-supported windowing systems.) On the Mac OS X machine I
17294 # use, the executable for Terminal.app is:
17295 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
17297 # If you're looking for a description of the full-screen system
17298 # console which runs under Apple's Darwin operating system on PowerPC
17299 # platforms, see the "xnuppc" entry instead.
17301 # There were no function keys in version 41. In version 51, there are
17302 # four working function keys (F1, F2, F3 and F4.) The function keys
17303 # are included in all of these entries.
17305 # It does not support mouse pointer position reporting. Under some
17306 # circumstances the cursor can be positioned using option-click; this
17307 # works by comparing the cursor position and the selected position,
17308 # and simulating enough cursor-key presses to move the cursor to the
17309 # selected position. This technique fails in all but the simplest
17312 # It provides partial ANSI color support (background colors interacted
17313 # badly with bold in version 41, though, as reflected in :ncv:.) The
17314 # monochrome (-m) entries are useful if you've disabled color support
17315 # or use a monochrome monitor. The full color (-c) entries are useful
17316 # in version 51, which doesn't exhibit the background color bug. They
17317 # also enable an xterm-compatible 16-color mode.
17319 # The configurable titlebar is set using xterm-compatible sequences;
17320 # it is used as a status bar in the statusline (-s) entries. Its width
17321 # depends on font sizes and window sizes, but 50 characters seems to
17322 # be the default for an 80x24 window.
17324 # The MacRoman character encoding is used for some of the alternate
17325 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
17326 # disable alternate character set support entirely, and the "VT100"
17327 # (-acs) entries rely instead on Terminal.app's own buggy VT100
17328 # graphics emulation, which seems to think the character encoding is
17329 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
17330 # are useful in Terminal.app version 51, which supports UTF-8 and
17331 # other ASCII-compatible character encodings but does not correctly
17332 # implement VT100 graphics; once VT100 graphics are correctly
17333 # implemented in Terminal.app, the "VT100" (-acs) entries should be
17334 # usable in any ASCII-compatible character encoding [except perhaps
17335 # in UTF-8, where some experts argue for disallowing alternate
17336 # characters entirely.]
17338 # Terminal.app reports "vt100" as the terminal type, but exports
17339 # several environment variables which may aid detection in a shell
17340 # profile (i.e. .profile or .login):
17343 # TERM_PROGRAM=Apple_Terminal
17344 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
17345 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
17347 # For example, the following Bourne shell script would detect the
17348 # correct terminal type:
17350 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
17353 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
17355 # TERM="nsterm-old"
17357 # TERM="nsterm-c-7"
17361 # In a C shell derivative, this would be accomplished by:
17363 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
17364 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
17365 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
17366 # setenv TERM "nsterm-old"
17368 # setenv TERM "nsterm-c-7"
17373 # The '+' entries are building blocks
17374 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
17375 am, bw, msgr, xenl, xon,
17376 cols#80, it#8, lines#24,
17377 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
17378 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17379 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17380 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17381 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
17382 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
17383 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
17384 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
17385 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17386 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17387 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
17388 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17389 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
17391 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
17392 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17393 enacs=\E(B\E)0, rmacs=^O,
17394 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17395 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17397 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
17398 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
17399 enacs=\E(B\E)0, rmacs=^O,
17400 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17401 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17403 # compare with xterm+sl-twm
17404 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
17407 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
17409 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
17410 op=\E[0m, use=ibm+16color,
17412 nsterm+c41|AppKit Terminal.app v41 color support,
17413 colors#8, ncv#37, pairs#64,
17414 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17416 # These are different combinations of the building blocks
17418 # ASCII charset (-7)
17419 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
17422 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
17423 use=nsterm+s, use=nsterm+7,
17425 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
17426 use=nsterm+c41, use=nsterm+7,
17428 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
17429 use=nsterm+c, use=nsterm+7,
17431 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
17432 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
17434 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
17435 use=nsterm+s, use=nsterm+c, use=nsterm+7,
17437 # VT100 alternate-charset (-acs)
17438 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
17441 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
17442 use=nsterm+s, use=nsterm+acs,
17444 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
17445 use=nsterm+c41, use=nsterm+acs,
17447 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
17448 use=nsterm+c, use=nsterm+acs,
17450 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
17451 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
17453 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
17454 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
17457 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
17460 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
17461 use=nsterm+s, use=nsterm+mac,
17463 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
17464 use=nsterm+c41, use=nsterm+mac,
17466 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
17467 use=nsterm+c, use=nsterm+mac,
17469 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
17470 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
17472 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
17473 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
17475 # In Mac OS X version 10.5 the format of the preferences has changed
17476 # and a new, more complex technique is needed, e.g.,
17478 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
17479 # "NSUserDefaults");ud=NSUserDefaults.alloc();
17480 # ud.init();prefs=ud.persistentDomainForName_(
17481 # "com.apple.Terminal");prefs["Window Settings"][
17482 # prefs["Default Window Settings"]]["TerminalType"
17483 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
17484 # "com.apple.Terminal")' nsterm-16color
17486 # and it is still not settable from the preferences dialog. This is
17487 # tracked under rdar://problem/7365108 and rdar://problem/7365134
17488 # in Apple's bug reporter.
17490 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
17491 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
17492 # vt52, vt100, vt102 and xterm.
17493 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
17495 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
17496 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
17497 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
17498 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17499 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17500 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
17501 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
17502 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
17503 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
17504 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
17506 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
17507 # the background color erase feature. The newer version 240.2 in Mac OS X
17508 # version 10.5 does not.
17510 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
17511 # and D P Schreber comparing to nsterm-c-s-acs.
17513 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
17514 # can be set in Terminal.app, e.g.,
17516 # defaults write com.apple.Terminal TermCapString nsterm-bce
17518 # and that it is not set in Terminal's preferences dialog.
17520 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
17523 # * The terminal description matches the default settings.
17524 # * The keyboard is configurable via a dialog.
17525 # * By default khome, kend, knext and kprev are honored only with a
17527 # * There are bindings for control left/right arrow (but not up/down).
17528 # Added those to nsterm-16color, which is the version used for OS X 10.6
17529 # * "Allow VT100 application keypage mode" is by default disabled.
17530 # There is no way to press keypad-comma unless application mode is enabled
17532 # * 132-column mode stopped working during vttest's tests. Consider it broken.
17533 # * CHT, REP, SU, SD are buggy.
17534 # * ECH works (also in Leopard), but is not used here for compatibility.
17535 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
17536 # xterm-256color. However, it adds "nsterm", so it is possible to use the
17537 # nsterm entry from this file to override the MacPorts (20110404) or
17538 # system (20081102) copy of this file.
17539 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
17540 bce, use=nsterm-16color,
17542 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
17543 # TERM_PROGRAM_VERSION=309
17544 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
17545 # TERM_PROGRAM_VERSION=303
17546 nsterm-256color|Terminal.app in OS X 10.8,
17548 initc@, use=xterm+256color, use=nsterm-bce,
17550 # This is an alias which should always point to the "current" version
17551 nsterm|Apple_Terminal|AppKit Terminal.app,
17552 use=nsterm-256color,
17554 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
17555 # more featureful) terminal emulator for Mac OS X. It is similar
17556 # enough in capabilities to nsterm-16color that I have derived this
17557 # description from that one, but as far as I know they share no code.
17558 # Many of the features are user-configurable, but I attempt only to
17559 # describe the default configuration.
17561 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
17563 iTerm.app|iTerm.app terminal emulator for Mac OS X,
17565 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
17566 use=nsterm-16color,
17568 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
17570 # On PowerPC platforms, Apple's Darwin operating system uses a
17571 # full-screen system console derived from a NetBSD framebuffer
17572 # console. It is an ANSI-style terminal, and is not really VT-100
17575 # Under Mac OS X, this is the system console driver used while in
17576 # single-user mode [reachable by holding down Command-S during the
17577 # boot process] and when logged in using console mode [reachable by
17578 # typing ">console" at the graphical login prompt.]
17580 # If you're looking for a description of the Terminal.app terminal
17581 # emulator which runs under the Mac OS X Quartz windowing system (and
17582 # other AppKit-supported windowing systems,) see the "nsterm"
17585 # NOTE: Under Mac OS X version 10.1, the default login window does not
17586 # prompt for user name, instead requiring an icon to be selected from
17587 # a list of known users. Since the special ">console" login is not in
17588 # this list, you must make one of two changes in the Login Window
17589 # panel of the Login section of System Prefs to make the special
17590 # ">console" login accessible. The first option is to enable 'Show
17591 # "Other User" in list for network users', which will add a special
17592 # "Other..." icon to the graphical login panel. Selecting "Other..."
17593 # will present the regular graphical login prompt. The second option
17594 # is to change the 'Display Login Window as:' setting to 'Name and
17595 # password entry fields', which replaces the login panel with a
17596 # graphical login prompt.
17598 # There are no function keys, at least not in Darwin 1.3.
17600 # It has no mouse support.
17602 # It has full ANSI color support, and color combines correctly with
17603 # all three supported attributes: bold, inverse-video and underline.
17604 # However, bold colored text is almost unreadable (bolding is
17605 # accomplished using shifting and or-ing, and looks smeared) so bold
17606 # has been excluded from the list of color-compatible attributes
17607 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
17608 # monochrome monitor.
17610 # There is one serious bug with this terminal emulation's color
17611 # support: repositioning the cursor onto a cell with non-matching
17612 # colors obliterates that cell's contents, replacing it with a blank
17613 # and displaying a colored cursor in the "current" colors. There is
17614 # no complete workaround at present [other than using the monochrome
17615 # (-m) entries,] but removing the (msgr) capability seemed to help.
17617 # The "standout" chosen was simple reverse-video, although a colorful
17618 # standout might be more aesthetically pleasing. Similarly, the bold
17619 # chosen is the terminal's own smeared bold, although a simple
17620 # color-change might be more readable. The color-bold (-b) entries
17621 # uses magenta colored text for bolding instead. The fancy color (-f
17622 # and -f2) entries use color for bold, standout and underlined text
17623 # (underlined text is still underlined, though.)
17625 # Apparently the terminal emulator does support a VT-100-style
17626 # alternate character set, but all the alternate character set
17627 # positions have been left blank in the font. For this reason, no
17628 # alternate character set capabilities have been included in this
17629 # description. The console driver appears to be ASCII-only, so (enacs)
17630 # has been excluded [although the VT-100 sequence does work.]
17632 # The default Mac OS X and Darwin installation reports "vt100" as the
17633 # terminal type, and exports no helpful environment variables. To fix
17634 # this, change the "console" entry in /etc/ttys from "vt100" to
17635 # "xnuppc-WxH", where W and H are the character dimensions of your
17636 # console (see below.)
17638 # The font used by the terminal emulator is apparently one originally
17639 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
17640 # file includes descriptions for the following geometries:
17642 # Pixels Characters Entry Name (append -m for monochrome)
17643 # -------------------------------------------------------------------
17644 # 640x400 80x25 xnuppc-80x25
17645 # 640x480 80x30 xnuppc-80x30
17646 # 720x480 90x30 xnuppc-90x30
17647 # 800x600 100x37 xnuppc-100x37
17648 # 896x600 112x37 xnuppc-112x37
17649 # 1024x640 128x40 xnuppc-128x40
17650 # 1024x768 128x48 xnuppc-128x48
17651 # 1152x768 144x48 xnuppc-144x48
17652 # 1280x1024 160x64 xnuppc-160x64
17653 # 1600x1024 200x64 xnuppc-200x64
17654 # 1600x1200 200x75 xnuppc-200x75
17655 # 2048x1536 256x96 xnuppc-256x96
17657 # The basic "xnuppc" entry includes no size information, and the
17658 # emulator includes no reporting capability, so you'll be at the mercy
17659 # of the TTY device (which reports incorrectly on my hardware.) The
17660 # color-bold entries do not include size information.
17662 # The '+' entries are building blocks
17663 xnuppc+basic|Darwin PowerPC Console basic capabilities,
17664 am, bce, mir, xenl,
17666 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17667 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17668 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17669 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
17670 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
17671 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17672 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
17673 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17675 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17676 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17677 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
17679 xnuppc+c|Darwin PowerPC Console ANSI color support,
17680 colors#8, ncv#32, pairs#64,
17681 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17683 xnuppc+b|Darwin PowerPC Console color-bold support,
17686 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17689 xnuppc+f|Darwin PowerPC Console fancy color support,
17691 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
17692 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
17694 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
17697 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
17698 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
17700 # Building blocks for specific screen sizes
17701 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
17704 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
17707 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
17710 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
17711 cols#100, lines#37,
17713 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
17714 cols#112, lines#37,
17716 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
17717 cols#128, lines#40,
17719 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
17720 cols#128, lines#48,
17722 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
17723 cols#144, lines#48,
17725 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
17726 cols#160, lines#64,
17728 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
17729 cols#200, lines#64,
17731 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
17732 cols#200, lines#75,
17734 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
17735 cols#256, lines#96,
17737 # These are different combinations of the building blocks
17739 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
17742 xnuppc|darwin|Darwin PowerPC Console (color),
17743 use=xnuppc+c, use=xnuppc+basic,
17745 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
17748 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
17749 use=xnuppc+b, use=xnuppc+c,
17751 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
17754 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
17755 use=xnuppc+f, use=xnuppc+c,
17757 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
17760 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
17761 use=xnuppc+f2, use=xnuppc+c,
17763 # Combinations for specific screen sizes
17764 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
17765 use=xnuppc+80x25, use=xnuppc+basic,
17767 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
17768 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
17770 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
17771 use=xnuppc+80x30, use=xnuppc+basic,
17773 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
17774 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
17776 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
17777 use=xnuppc+90x30, use=xnuppc+basic,
17779 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
17780 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
17782 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
17783 use=xnuppc+100x37, use=xnuppc+basic,
17785 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
17786 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
17788 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
17789 use=xnuppc+112x37, use=xnuppc+basic,
17791 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
17792 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
17794 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
17795 use=xnuppc+128x40, use=xnuppc+basic,
17797 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
17798 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
17800 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
17801 use=xnuppc+128x48, use=xnuppc+basic,
17803 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
17804 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
17806 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
17807 use=xnuppc+144x48, use=xnuppc+basic,
17809 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
17810 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
17812 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
17813 use=xnuppc+160x64, use=xnuppc+basic,
17815 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
17816 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
17818 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
17819 use=xnuppc+200x64, use=xnuppc+basic,
17821 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
17822 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
17824 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
17825 use=xnuppc+200x75, use=xnuppc+basic,
17827 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
17828 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
17830 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
17831 use=xnuppc+256x96, use=xnuppc+basic,
17833 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
17834 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
17836 #### Radio Shack/Tandy
17839 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17840 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17841 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17842 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17844 cols#80, it#8, lines#24,
17845 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17846 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17847 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17848 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17849 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17850 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17851 # (trs2: removed obsolete ":nl=^_:" -- esr)
17852 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17854 cols#80, it#8, lines#24,
17855 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17856 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17857 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17858 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17859 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17860 # (This had extension capabilities
17861 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17862 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17863 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17864 trs16|trs-80 model 16 console,
17866 cols#80, it#8, lines#24,
17867 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17868 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17869 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17870 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17871 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17872 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17873 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17874 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
17875 smacs=\ERG, smso=\ERD,
17877 #### Commodore Business Machines
17879 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17880 # after years of shaky engineering and egregious mismanagement. Made one
17881 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17882 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17883 # ever (most units sold); they can still be found gathering dust in closets
17887 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17888 # Added a few more entries, converted caret-type control sequence (^x) entries
17889 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17890 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17892 # :as:, :ae: Support for alternate character sets.
17893 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17894 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17895 # This one appears to fix a problem I always had with a line ending
17896 # at 'width+1' (I think) followed by a blank line in vi. The blank
17897 # line tended to disappear and reappear depending on how the screen
17898 # was refreshed. Note that this is probably needed only if you use
17899 # something like a Dnet Fterm with the window sized to some peculiar
17900 # dimension larger than 80 columns.
17901 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17902 # (amiga: removed obsolete :kn#10:,
17903 # also added empty <acsc> to suppress a warning --esr)
17905 OTbs, am, bw, xenl,
17907 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17908 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17909 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17910 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17911 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17912 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17913 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17914 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17915 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17916 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17917 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17918 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17919 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17921 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17922 # (amiga: added empty <acsc> to suppress a warning.
17923 # I'm told this entry screws up badly with AS225, the Amiga
17924 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17925 amiga-h|Hans Verkuil's Amiga ANSI,
17928 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17929 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17930 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17931 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17932 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17933 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17934 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17935 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17936 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17937 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17938 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17939 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17940 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17941 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17942 smso=\2337m, smul=\2334m,
17944 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17946 # Pavel Fedin added
17951 amiga-8bit|Amiga ANSI using 8-bit controls,
17952 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17953 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17954 kpp=\233T, ri=\215, rin@, use=amiga-h,
17956 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17957 # requires use of appropriate preferences settings.
17958 amiga-vnc|Amiga using VNC console (black on light gray),
17959 am, da, db, msgr, ndscr,
17960 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17961 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17962 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17963 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17964 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17965 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17966 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17967 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17968 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17969 indn=\E[%p1%dS, invis=\E8m,
17970 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17971 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17972 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17973 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17974 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17975 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17976 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17977 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17978 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17979 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17980 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17981 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17982 smso=\E[1m, smul=\E[4m,
17984 # MorphOS on Genesi Pegasos
17985 # By Pavel Fedin <sonic_amiga@rambler.ru>
17987 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17988 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17989 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17990 ri=\215, rin@, use=amiga-h,
17992 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
17993 # I'm trying to write a termcap for a commodore b-128, and I'm
17994 # having a little trouble. I've had to map most of my control characters
17995 # to something that unix will accept (my delete-char is a ctrl-t, etc),
17996 # and create some functions (like cm), but thats life.
17997 # The problem is with the arrow keys - right, and up work fine, but
17998 # left deletes the previous character and down I just can't figure out.
17999 # Jove knows what I want, but I don't know what it's sending to me (it
18000 # isn't thats bound to next-line in jove).
18001 # Anybody got any ideas? Here's my termcap.
18002 # DAG -- I changed his "^n" entries to "\n"; see if that works.
18004 commodore|b-128|Commodore B-128 micro,
18006 OTdN#20, cols#80, lines#24, pb#150,
18007 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
18008 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
18009 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
18010 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
18011 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
18016 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
18017 northstar|North Star Advantage,
18021 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
18022 el=\016$<200/>, home=\034\032$<200/>,
18026 # Thu Jul 7 03:55:16 1983
18028 # As an aside, be careful; it may sound like an anomaly on the
18029 # Osborne, but with the 80-column upgrade, it's too easy to
18030 # enter lines >80 columns!
18032 # I've already had several comments...
18033 # The Osborne-1 with the 80-col option is capable of being
18034 # 52, 80, or 104 characters wide; default to 80 for compatibility
18035 # with most systems.
18037 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
18038 osborne-w|osborne1-w|osborne I in 104-column mode,
18040 cols#104, lines#24,
18041 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18042 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18043 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
18044 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
18045 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
18046 osborne|osborne1|osborne I in 80-column mode,
18047 OTbs, am, mir, msgr, ul, xhp,
18048 OTdB#4, cols#80, lines#24,
18049 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
18050 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18051 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
18052 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
18053 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
18055 # Osborne Executive definition from BRL
18056 # Similar to tvi920
18057 # Added by David Milligan and Tom Smith (SMU)
18058 osexec|Osborne executive,
18060 OTug#1, cols#80, lines#24, xmc#1,
18061 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18062 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18063 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
18064 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
18065 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
18066 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
18067 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
18070 #### Console types for obsolete UNIX clones
18072 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
18073 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
18074 # were commercial, Minix an educational tool sold in conjunction with a book.
18075 # Memory-segmentation limits and a strong tendency to look like V7 long after
18076 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
18077 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
18078 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
18079 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
18080 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
18081 # even as single processes under SunOS and the Macintosh OS.
18085 # http://www.minix3.org/manpages/man4/console.4.html
18086 minix|minix console (v3),
18087 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
18088 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
18089 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
18090 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
18091 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
18092 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
18093 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
18094 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
18095 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
18096 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
18097 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
18098 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
18099 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18100 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
18103 minix-3.0|minix console (v3.0),
18104 use=ecma+color, use=minix-1.7,
18107 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
18108 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
18109 minix-1.7|minix console (v1.7),
18111 cols#80, it#8, lines#25,
18112 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18113 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18114 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18115 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18116 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
18117 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18118 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18119 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
18120 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
18121 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
18122 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
18123 smso=\E[7m, smul=\E[4m,
18124 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
18125 minix-old|minix-1.5|minix console (v1.5),
18127 cols#80, it#8, lines#25,
18128 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18129 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18130 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18131 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18132 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
18133 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
18134 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18135 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
18136 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
18137 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
18138 # The linewrap option can be specified by editing /usr/include/minix/config.h
18139 # before recompiling the minix 1.5 kernel.
18140 minix-old-am|minix console with linewrap,
18143 pc-minix|minix console on an Intel box,
18144 use=klone+acs, use=minix-3.0,
18146 # According to the Coherent 2.3 manual, the PC console is similar
18147 # to a z19. The differences seem to be (1) 25 lines, (2) no status
18148 # line, (3) standout is broken, (4) ins/del line is broken, (5)
18149 # has blinking and bold.
18150 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
18152 cols#80, it#8, lines#25,
18153 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18154 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
18155 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
18156 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
18157 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
18159 # According to the Venix 1.1 manual, the PC console is similar
18160 # to a DEC vt52. Differences seem to be (1) arrow keys send
18161 # different strings, (2) enhanced standout, (3) added insert/delete line.
18162 # Note in particular that it doesn't have automatic margins.
18163 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
18164 # not described here because this derives from an old termcap entry.
18165 pc-venix|venix|IBM PC console running Venix,
18166 cols#80, it#8, lines#25,
18167 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18168 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18169 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
18170 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
18172 #### Miscellaneous microcomputer consoles
18174 # If you know anything more about any of these, please tell me.
18177 # The MAI Basic Four computer was obsolete at the end of the 1980s.
18178 # It may be used as a terminal by putting it in "line" mode as seen on
18179 # one of the status lines.
18180 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
18181 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
18182 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
18183 # used \ED instead.
18184 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
18185 mai|basic4|MAI Basic Four in ansi mode,
18186 am, da, db, mir, msgr,
18187 cols#82, it#8, lines#25,
18188 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
18189 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
18190 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
18191 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
18192 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
18193 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
18194 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18195 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
18196 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
18197 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18198 smir=\E[4h, smso=\E[7m, smul=\E[4m,
18199 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
18200 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
18202 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
18203 # The Basis 108 was a Apple II clone, manufactured by the "Basis
18204 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
18205 # about 1,5 km from where I live, but doesn't build own computers any
18206 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
18207 # equipped with one or two 5.25" disk drives, had a monochrome and colour
18208 # video output for a TV set or a dedicated monitor and several slots for
18209 # Apple II cards. Basis 108 were quite popular at german schools before
18210 # the advent of the IBM PC. They run, for example, the UCSD Pascal
18211 # development system (which I used even in 1993 to program the steering
18212 # and data recording for our school's experimental solar panel :), Apple DOS
18214 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
18215 basis|BASIS108 computer with terminal translation table active,
18216 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
18217 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
18218 smso=\E(, use=adm3a,
18219 # luna's BMC terminal emulator
18220 luna|luna68k|LUNA68K Bitmap console,
18221 cols#88, lines#46, use=ansi-mini,
18222 megatek|pegasus workstation terminal emulator,
18225 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
18226 # interface (pre-Macintosh by several years) that went nowhere.
18227 xerox820|x820|Xerox 820,
18230 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18231 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
18234 #### Videotex and teletext
18237 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
18238 # \E[?3l 80 columns
18239 # \E[?4l scrolling on
18240 # \E[12h local echo off
18241 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18242 # \E)0 G1 DEC set (line graphics)
18244 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
18245 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
18246 OTbs, eslok, hs, xenl,
18247 cols#80, it#8, lines#24, wsl#72, xmc#0,
18248 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
18249 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
18250 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18251 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18252 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18253 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18254 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
18255 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
18256 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
18257 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
18258 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
18259 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
18260 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
18261 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
18262 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
18263 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18264 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
18265 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
18266 u6=\E[%i%d;%dR, u7=\E[6n,
18268 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
18270 minitel1|minitel 1,
18271 am, bw, eslok, hs, hz, msgr,
18272 colors#8, cols#40, lines#24, pairs#8,
18273 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
18274 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18275 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
18276 enacs=^Y, fsl=^J, home=^^, ind=^J,
18277 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
18278 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
18279 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
18280 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
18281 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
18282 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
18283 minitel1b|minitel 1-bistandard (in 40cols mode),
18285 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
18286 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18287 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
18288 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
18289 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18290 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
18291 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18292 # <rmkx> posait des problemes (logout en sortant de vi).
18293 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
18295 colors@, cols#80, it#8, pairs@,
18296 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
18297 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
18298 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18299 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
18300 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
18301 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
18302 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
18303 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
18304 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18306 ######## OBSOLETE VDT TYPES
18308 # These terminals are *long* dead -- these entries are retained for
18309 # historical interest only.
18311 #### Amtek Business Machines
18314 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
18315 # but these caps were commented out in 8.3; also, removed overridden
18316 # ":do=^J:" -- esr)
18317 abm80|amtek business machines 80,
18320 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
18321 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
18322 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
18324 #### Bell Labs blit terminals
18326 # These were AT&T's official entries. The 5620 FAQ maintained by
18327 # David Breneman <daveb@dgtl.com> has this to say:
18329 # Actually, in the beginning was the Jerq, and the Jerq was white with a
18330 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
18331 # was good. But lo, upon the horizon loomed a mighty management-type person
18332 # (known now only by the initials VP) who said, the mighty Jerq must stay
18333 # alone, and could not go forth into the world. So Locanthi and Pike put the
18334 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
18335 # world. And the Jerq lived the rest of its days in research, but never
18336 # strayed from those paths.
18338 # In all seriousness, the Blit was originally known as the Jerq, but when
18339 # it started to be shown outside of the halls of the Bell Labs Research
18340 # organization, the management powers that be decided that the name could
18341 # not remain. So it was renamed to be Blit. This was in late 1981.
18343 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
18347 blit|jerq|blit running teletype rom,
18349 cols#87, it#8, lines#72,
18350 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18351 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
18352 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
18353 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
18354 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
18355 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
18357 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
18358 cbblit|fixterm|blit running columbus code,
18360 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
18361 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
18362 smul=\EU", use=blit,
18364 oblit|ojerq|first version of blit rom,
18365 am, da, db, eo, mir, ul, xon,
18366 cols#88, it#8, lines#72,
18367 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18368 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
18369 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
18370 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
18373 #### Bolt, Beranek & Newman (bbn)
18375 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
18376 # The parent company, best known as the architects of the Internet, is
18379 # Jeff DelPapa <dp@world.std.com> writes:
18380 # The bitgraph was a large white box that contained a monochrome bitmap
18381 # display, and a 68000 to run it. You could download code and run it on
18382 # the cpu, it had 128kb (I think) of memory. I used one in the late
18383 # 70's, sure beat a vt100. It had one strange feature tho -- it used
18384 # the cpu to bitblt pixels to scroll, it took longer than the refresh
18385 # rate, and looked like a rubber sheet stretching, then snapping
18386 # upwards. It had everything the early mac had, except a floppy drive a
18387 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18388 # Beranek and Neuman) sold at most a few hundred of them to the real
18389 # world. DOD may have bought more...
18392 # Entries for the BitGraph terminals. The problem
18393 # with scrolling in vi can only be fixed by getting BBN to put
18394 # smarter scroll logic in the terminal or changing vi or padding
18395 # scrolls with about 500 ms delay.
18397 # I always thought the problem was related to the terminal
18398 # counting newlines in its input buffer before scrolling and
18399 # then moving the screen that much. Then vi comes along and
18400 # paints lines in on the bottom line of the screen, so you get
18401 # this big white gap.
18403 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
18404 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18406 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
18407 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18409 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
18412 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
18413 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18414 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
18415 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
18416 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18417 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
18418 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
18419 sgr0=\E[m, smkx=\E=, smso=\E[7m,
18421 bg1.25rv|bbn bitgraph 1.25 (reverse video),
18422 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18424 bg1.25nv|bbn bitgraph 1.25 (normal video),
18425 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18427 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
18428 bg1.25|bbn bitgraph 1.25,
18430 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
18431 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
18432 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
18433 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
18434 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
18435 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
18436 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
18439 #### Bull (bq, dku, vip)
18441 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
18443 #============================================#
18444 # BULL QUESTAR 210 `SDP' terminals emulation #
18445 #============================================#
18447 # Description written by R.K.Saunders (Bull Transac)
18449 # Modifications written by F. Girard (Bull MTS)
18450 # 19-05-87 V02.00.01
18451 # 17-12-87 V02.00.02
18452 # 15-09-89 V02.00.05
18454 # Typical technical selections F1 (modes SDP/ROLL):
18455 # -------------------------------------------------------
18456 # | 01 02 03 04 05 06 07 08 09 10 |
18457 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
18459 # | 11 12 13 14 15 16 17 18 19 20 |
18460 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
18462 # | 21 22 23 24 25 26 27 28 29 30 |
18463 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
18465 # | 31 32 33 34 35 36 37 38 39 40 |
18466 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
18467 # -------------------------------------------------------
18468 # Typical firmware identification F5 "etat 6":
18469 # P287.02.04b (AZERTY)
18470 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
18471 # P298.03.03 (monochrome) or P374.03.02 (colour)
18473 # SM SDP mode (VIP command): ^[[?=h
18474 # RIS (erases screen): ^[c
18475 # DMI disable keyboard: ^[`
18476 # SM double rendition mode: ^[[?>h
18477 # RM solicited status mode: ^[[5l
18478 # RM character mode: ^[[>l
18479 # RM echoplex mode: ^[[12l
18480 # RM column tab mode: ^[[18l
18481 # RM forbid SS2 keyboard mode: ^[[?<l
18482 # SM scroll mode: ^[[=h
18483 # FCF enable XON/XOFF: ^[P1s^[\
18484 # MTL select end msg character: ^[[^Wp
18485 # EMI enable keyboard: ^[b
18486 # RIS retour etat initial: ^[c
18487 # enable FC keypad: ^[[?<h,
18488 # MPW map status line window: ^[PY99:98^[\
18489 # SCP select status line: ^[[0;98v
18490 # ED erase entire partition: ^[[2J
18491 # SCP select main partition: ^[[v
18492 # SM character insertion mode: ^[[4h
18493 # RM character replacement mode: ^[[4l
18494 # COO cursor on: ^[[r
18495 # COO cursor off: ^[[1r
18496 # SGR dim (turquoise) rev attr: ^[[2;7m
18497 # SGR Data normal attr: ^[[m
18498 # SO Line-graphic mode ON: ^N
18499 # SI Line-graphic mode OFF: ^O
18500 # MC start routing to printer: ^[[5i
18501 # MC stop routing to printer: ^M^[[4i
18504 # This entry covers the following terminals:
18505 # dku7102, tws2102, and tws models 2105 to 2112
18506 tws-generic|dku7102|Bull Questar tws terminals,
18507 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18508 cols#80, it#8, lines#24, wsl#80,
18509 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18510 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18511 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18512 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18513 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18514 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18515 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18516 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18517 il1=\E[L, ind=^J, invis=\E[0;8m,
18518 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18519 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18520 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18521 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18522 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18523 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18524 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18525 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18526 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18527 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18528 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18529 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18530 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18531 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18532 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18533 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18534 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18536 tws2103|xdku|BULL Questar tws2103,
18537 ht=^I, use=tws-generic,
18538 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18539 ht=^I, use=tws2102-sna,
18540 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18541 clear=\E[2J\E[H, cup@, dl@, dl1@,
18542 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18543 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18545 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18546 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18547 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18548 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18550 #=========================================================#
18551 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18552 #=========================================================#
18554 # Description written by J. Staerck (BULL SA)
18555 # Copyright (c) 1989 BULL SA
18556 #---------------------------------------------------------------------------
18557 # This entry is used for terminals with vt320 emulation mode
18558 # and following set-up :
18559 # 8 bit ISO Latin Character Set (ISO 8859-1),
18560 # 7 bit Control Characters,
18561 # 80 columns screen.
18562 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18563 # They are used in string capabilities with vt220-320 emulation mode.
18564 # In the following DEC definitions, two kinds of terminfo databases are
18566 # 1. the first with Command Sequence Introducer starting with escape
18567 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18568 # 2. the second with Command Sequence Introducer starting with escape
18569 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18570 # Soft Terminal Reset esc [ ! p
18571 # RIS (erases screen): esc c
18572 # DECKPNM numeric keypad mode: esc >
18573 # DECKPAM applic. keypad mode: esc =
18574 # DECSTBM Scrolling region: esc [ r
18575 # SCS select G0 = US: esc ( B
18576 # SCS select G1 = line-graphic: esc ) 0
18577 # Select 7-bit C1 controls: esc sp F
18578 # Select 8-bit C1 controls: esc sp G
18579 # Select cursor home: esc [ H
18580 # Select erase screen: esc [ J
18581 # SM KAM lock keyboard: esc [ 2 h
18582 # RM KAM unlock keyboard: esc [ 2 l
18583 # SM SRM local echo off: esc [ 1 2 h
18584 # RM SRM local echo on: esc [ 1 2 l
18585 # SM LNM New line : esc [ 2 0 h
18586 # RM LNM return = CR only: esc [ 2 0 l
18587 # SM DECCKM cursor keys mode: esc [ ? 1 h
18588 # RM DECCKM appli. keys mode: esc [ ? 1 l
18589 # SM DECANM ANSI mode on: esc [ ? 2 h
18590 # RM DECANM ANSI mode off: esc [ ? 2 l
18591 # SM DECCOLM 132-column screen: esc [ ? 3 h
18592 # RM DECCOLM 80-column screen: esc [ ? 3 l
18593 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18594 # RM DECSCLM Jump scroll: esc [ ? 4 l
18595 # SM DECSCNM screen light backgr. esc [ ? 5 h
18596 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18597 # SM DECOM move within margins: esc [ ? 6 h
18598 # RM DECOM move outside margins: esc [ ? 6 l
18599 # SM DECAWM auto right margin: esc [ ? 7 h
18600 # RM DECAWM auto right margin: esc [ ? 7 l
18601 # SM DECARM auto repeat: esc [ ? 8 h
18602 # RM DECARM auto repeat: esc [ ? 8 l
18603 # DECSASD Select active main: esc [ 0 $ }
18604 # DECSASD Select active status: esc [ 1 $ }
18605 # DECSSDT Select status none: esc [ 0 $ ~
18606 # DECSSDT Select status indic.: esc [ 1 $ ~
18607 # DECSSDT Select status host-wr: esc [ 2 $ ~
18608 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18609 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18610 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18611 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18612 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18613 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18614 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18615 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18616 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18617 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18618 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18619 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18620 # Char. and Line attributes: esc [ Ps ... Ps m
18621 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18622 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18625 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
18626 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
18627 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
18628 cols#80, it#8, lines#24, vt#3, wsl#80,
18629 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18630 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18631 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
18632 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18633 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18634 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18635 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18636 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
18637 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
18638 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
18639 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18640 is1=\E[63;1"p\E[2h,
18641 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18642 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
18643 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
18644 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
18645 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18646 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18647 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
18648 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18649 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18650 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
18651 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
18652 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18653 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
18655 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18656 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
18657 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
18658 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
18659 bq300-rv|Bull vt320 reverse 80 columns,
18660 flash=\E[?5l$<50>\E[?5h,
18661 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18663 bq300-w|Bull vt320 132 columns,
18665 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18666 rs2=\E[?3h, use=bq300,
18667 bq300-w-rv|Bull vt320 reverse mode 132 columns,
18669 flash=\E[?5l$<50>\E[?5h,
18670 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18671 rs2=\E[?3h, use=bq300,
18673 # This entry is used for terminals with vt320 emulation mode
18674 # and following set-up :
18675 # 8 bit ISO Latin Character Set (ISO 8859-1),
18676 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
18677 # 80 columns screen.
18678 # Soft Terminal Reset csi ! p
18679 # RIS (erases screen): esc c
18680 # DECKPNM numeric keypad mode: esc >
18681 # DECKPAM applic. keypad mode: esc =
18682 # DECSTBM Scrolling region: esc [ r
18683 # SCS select G0 = US: esc ( B
18684 # SCS select G1 = line-graphic: esc ) 0
18685 # Select 7-bit C1 controls: esc sp F
18686 # Select 8-bit C1 controls: esc sp G
18687 # Select cursor home: csi H
18688 # Select erase screen: csi J
18689 # SM KAM lock keyboard: csi 2 h
18690 # RM KAM unlock keyboard: csi 2 l
18691 # SM SRM local echo off: csi 1 2 h
18692 # RM SRM local echo on: csi 1 2 l
18693 # SM LNM New line : csi 2 0 h
18694 # RM LNM return = CR only: csi 2 0 l
18695 # SM DECCKM cursor keys mode: csi ? 1 h
18696 # RM DECCKM appli. keys mode: csi ? 1 l
18697 # SM DECANM ANSI mode on: csi ? 2 h
18698 # RM DECANM ANSI mode off: csi ? 2 l
18699 # SM DECCOLM 132-column screen: csi ? 3 h
18700 # RM DECCOLM 80-column screen: csi ? 3 l
18701 # SM DECSCLM Smooth scroll: csi ? 4 h
18702 # RM DECSCLM Jump scroll: csi ? 4 l
18703 # SM DECSCNM screen light backgr. csi ? 5 h
18704 # RM DECSCNM screen dark backgr. csi ? 5 l
18705 # SM DECOM move within margins: csi ? 6 h
18706 # RM DECOM move outside margins: csi ? 6 l
18707 # SM DECAWM auto right margin: csi ? 7 h
18708 # RM DECAWM auto right margin: csi ? 7 l
18709 # SM DECARM auto repeat: csi ? 8 h
18710 # RM DECARM auto repeat: csi ? 8 l
18711 # DECSASD Select active main: csi 0 $ }
18712 # DECSASD Select active status: csi 1 $ }
18713 # DECSSDT Select status none: csi 0 $ ~
18714 # DECSSDT Select status indic.: csi 1 $ ~
18715 # DECSSDT Select status host-wr: csi 2 $ ~
18716 # SM DECTCEM Visible cursor: csi ? 2 5 h
18717 # RM DECTCEM Invisible cursor: csi ? 2 5 l
18718 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
18719 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
18720 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
18721 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
18722 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
18723 # Char. and Line attributes: csi Ps ... Ps m
18724 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18725 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18726 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
18727 bq300-8|Bull vt320 full 8 bits 80 columns,
18728 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18729 cols#80, it#8, lines#24, vt#3, wsl#80,
18730 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18731 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
18732 clear=\233H\233J, cnorm=\233?25h, cr=^M,
18733 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
18734 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
18735 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
18736 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
18737 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
18738 el=\233K, el1=\2331K, enacs=\E(B\E)0,
18739 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
18740 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
18741 ind=\ED, is1=\E[63;2"p\E[2h,
18742 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18743 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
18744 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
18745 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18746 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
18747 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
18748 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
18749 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
18750 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
18751 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
18752 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
18753 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
18754 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
18755 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
18756 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
18757 s0ds=\E(B, s1ds=\E(0, sc=\E7,
18758 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18759 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
18760 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
18761 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
18762 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
18763 flash=\233?5l$<50>\233?5h,
18764 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18766 bq300-8w|Bull vt320 8-bit 132 columns,
18768 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18769 rs2=\233?3h, use=bq300-8,
18770 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
18772 flash=\233?5l$<50>\233?5h,
18773 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18774 rs2=\233?3h, use=bq300-8,
18776 # This entry is used for terminals with vt320 emulation mode
18777 # a 102 keys keyboard (PC scancode !) and following set-up :
18778 # 8 bit ISO Latin Character Set (ISO 8859-1),
18779 # 7 bit Control Characters,
18780 # 80 columns screen.
18781 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
18782 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
18783 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
18784 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
18785 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
18786 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18787 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18788 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
18789 flash=\E[?5l$<50>\E[?5h,
18790 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18792 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
18794 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18795 rs2=\E[?3h, use=bq300-pc,
18796 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
18798 flash=\E[?5l$<50>\E[?5h,
18799 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18800 rs2=\E[?3h, use=bq300-pc,
18801 # 8 bit ISO Latin Character Set (ISO 8859-1),
18802 # 8 bit Control Characters,
18803 # 80 columns screen.
18804 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18805 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18806 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18807 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18808 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18809 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18810 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18811 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18812 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18813 flash=\E[?5l$<50>\E[?5h,
18814 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18816 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18818 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18819 rs2=\E[?3h, use=bq300-8-pc,
18820 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18822 flash=\E[?5l$<50>\E[?5h,
18823 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18824 rs2=\E[?3h, use=bq300-8-pc,
18826 #======================================================#
18827 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18828 #======================================================#
18830 # normal mode, 8 bits, 80 columns terminal.
18832 # RIS reset initial state: ^[c
18833 # BLE bell enable ^[h
18834 # BLD bell disable ^[g
18835 # CAMS char. attr. mode set ^[[D
18836 # CAMR char. attr. mode reset ^[[G
18838 # KBU keyboard unlock (set) ^[[W
18839 # KBL keyboard lock (reset) ^[[X
18840 # CM character mode (async.) ^[k
18841 # NEP non echoplex mode (by host) ^[l
18842 # EP echoplex mode (by host) ^[m
18843 # IM insert mode set ^[[I
18844 # IM insert mode reset ^[[J
18845 # RMS roll mode set ^[r
18846 # RMR roll mode reset ^[q
18847 # SM78 set mode vip7800 ^[[1q
18848 # SD scroll up (72 lines) ^[[0s
18849 # SD scroll down (72 lines) ^[[1s
18850 # RBM block mode reset ^[[E
18851 # SLS status line set ^[w
18852 # SLR status line reset ^[v
18853 # SLL status line lock ^[O
18854 # LGS Line-graphic mode set ^[G
18855 # LGR Line-graphic mode reset ^[F
18856 # TBC tab clear (at cursor pos.) ^[[g
18857 # TBI tab initialize ^[[N
18858 # TBS tab set (at cursor pos.) ^[p
18859 # PDS print data space ^[[0p
18860 # PHD print host data ^[[3p
18861 # PDT print data terminator ^[[<p
18862 # PRES print adapter reset ^[[2p
18863 # SSPR multi-part. reset ^[[<>u
18864 # SSP0 partition 0 set ^[[00u
18865 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18866 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18867 # SSP3 partition n format 3 ^[[PnPnu
18868 # ATR attribute (visual)
18871 # hide (blank) : ^[sH
18873 # inverse video : ^[sI
18878 # This covers the vip7800 and BQ3155-vip7800
18879 vip|Bull Questar 3155-7800,
18880 am, eslok, hs, km, mc5i, msgr, xenl, xon,
18881 cols#80, it#8, lines#24, vt#3, wsl#80,
18882 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
18883 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18884 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
18885 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
18886 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
18887 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
18888 is2=\E[00u\E[<>001001024080024080u\E[01u,
18889 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
18890 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
18891 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
18892 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
18893 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
18894 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
18895 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
18896 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
18897 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
18898 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
18899 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
18900 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
18901 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
18902 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18903 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18904 smul=\Es_, tbc=\E[N, tsl=\Ew,
18905 # normal screen, 8 bits, 132 columns terminal.
18906 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18908 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18909 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18911 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18912 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18913 cols#132, lines#72, wsl#132,
18914 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18919 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18920 # that is smaller than the screen, and puts up a warning message
18921 # outside the window. Te erases the warning message, puts the
18922 # window back to be the whole screen, and puts the cursor at just
18923 # below the small window. I defined <cnorm> and <civis> to really turn
18924 # the cursor on and off, but I have taken this out since I don't
18925 # like the cursor being turned off when vi exits.
18926 cg7900|chromatics|chromatics 7900,
18929 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18930 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18931 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18932 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18933 rmso=\001C1\,\001c2\,,
18934 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18935 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18937 #### Computer Automation
18940 ca22851|computer automation 22851,
18943 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18944 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18945 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18950 # This entry has correct padding and the undocumented "ri" capability
18951 cyb83|xl83|cybernex xl-83,
18954 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18955 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18956 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18957 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18958 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18959 cyb110|mdl110|cybernex mdl-110,
18962 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18963 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18964 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18965 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18966 ht=\011$<43>, ich1=\016A\035$<3.5>,
18967 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18971 # Datapoint is gone. They used to be headquartered in Texas.
18972 # They created ARCnet, an Ethernet competitor that flourished for a while
18973 # in the early 1980s before 3COM got wise and cut its prices. The service
18974 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18977 dp3360|datapoint|datapoint 3360,
18980 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18981 ed=^_, el=^^, home=^], ind=^J,
18983 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18984 # The Datapoint 8242 Workstation was sold at least between 1985
18985 # and 1989. To make the terminal work with this entry, press
18986 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18987 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18988 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18989 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18990 # fact unusable because the strings sent by the terminal conflict
18991 # with other keys).
18992 # The terminal is capable of displaying "box draw" characters.
18993 # For each graphic character you must send 2 ESC's (\E\E) followed
18994 # by a control character as follows:
18995 # character meaning
18996 # ========= =======
18999 # ctrl-G bottom tee
19002 # ctrl-J top left corner
19003 # ctrl-K top right corner
19004 # ctrl-L bottom left corner
19005 # ctrl-M bottom right corner
19006 # ctrl-N horizontal line
19007 # ctrl-O vertical line
19008 # Unfortunately this cannot be fitted into the termcap/terminfo
19009 # description scheme.
19010 dp8242|datapoint 8242,
19013 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
19014 cr=^M, cub1=^H, cud1=^J,
19015 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
19016 home=^U, ht=^I, il1=\E^T, ind=^C,
19017 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19018 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
19019 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
19020 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
19021 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
19022 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19023 smso=\E^E, smul=\E^F,
19024 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
19026 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
19028 # These entries are DEC's official terminfos for its older terminals.
19029 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
19030 # Engineering for more information. Updated terminfos and termcaps
19031 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
19037 bel=^G, cr=^M, cub1=^H, cud1=^J,
19041 bel=^G, cr=^M, cub1=^H, cud1=^J,
19045 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19046 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
19050 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19051 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19052 el=\EK, ht=^I, ind=^J, ri=\EI,
19053 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
19054 vt61|vt-61|vt61.5|dec vt61,
19056 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
19057 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
19058 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
19059 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19062 # The gigi does standout with red!
19063 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
19064 gigi|vk100|dec gigi graphics terminal,
19067 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
19068 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19069 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19070 el=\E[K, ht=^I, ind=^J,
19071 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
19072 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
19073 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
19074 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19075 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
19078 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
19079 # a PC differentiated from the IBM clones. It was a total, ludicrous,
19080 # grossly-overpriced failure (among other things, DEC's OS didn't include
19081 # a format program, so you had to buy pre-formatted floppies from DEC at
19082 # a hefty premium!).
19083 pro350|decpro|dec pro console,
19085 cols#80, it#8, lines#24,
19086 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19087 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
19088 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19089 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19090 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
19091 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
19092 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
19097 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
19098 dw2|decwriter|dw|decwriter II,
19101 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
19102 # \E(B Use U.S. character set (otherwise # => british pound !)
19103 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
19104 # \E[w 10 char/in pitch
19105 # \E[1;132 full width horizontal margins
19106 # \E[2g clear all tab stops
19108 # \E[66t 66 lines/page (for \f)
19109 # \E[1;66r full vertical page can be printed
19110 # \E[4g clear vertical tab stops
19111 # \E> disable alternate keypad mode (so it transmits numbers!)
19112 # \E[%i%p1%du set tab stop at column %d (origin == 1)
19113 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
19116 # The dw3 does standout with wide characters.
19118 dw3|la120|decwriter III,
19121 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
19122 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
19123 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
19124 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
19128 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
19129 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
19131 # These aren't official
19132 ln03|dec ln03 laser printer,
19135 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
19136 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
19138 ln03-w|dec ln03 laser printer 132 cols,
19140 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
19141 kcud1=^J, nel=^M^J, use=ln03,
19143 #### Delta Data (dd)
19146 # Untested. The cup sequence is hairy enough that it probably needs work.
19147 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
19148 # There are BSD-derived termcap entries floating around for this puppy
19149 # that are *certainly* wrong.
19150 delta|dd5000|delta data 5000,
19153 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
19154 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
19155 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
19157 #### Digital Data Research (ddr)
19160 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
19161 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
19163 cols#80, it#8, lines#24, vt#3,
19164 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19165 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19166 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
19167 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
19168 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
19169 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19170 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
19171 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
19172 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
19173 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19174 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
19177 #### Evans & Sutherland
19180 # Jon Leech <leech@cs.unc.edu> tells us:
19181 # The ps300 was the Evans & Sutherland Picture System 300, a high
19182 # performance 3D vector graphics system with a bunch of specialized hardware.
19183 # Approximate date of release was 1982 (early 80s, anyway), and it had several
19184 # evolutions including (limited) color versions such as the PS330C. PS300s
19185 # were effectively obsolete by the late 80s, replaced by raster graphics
19186 # systems, although specialized applications like molecular modelling
19187 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
19188 # are out of production, though of course E&S is very much alive (in 1996).
19189 # (ps300: changed ":pt@:" to "it@" -- esr)
19191 ps300|Picture System 300,
19194 rmso@, rmul@, smso@, smul@, use=vt100,
19196 #### General Electric (ge)
19199 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
19202 bel=^G, cr=^M, cud1=^J, ind=^J,
19204 #### Heathkit/Zenith
19207 # Here is a description of the H19 DIP switches:
19210 # 0-3 = baud rate as follows:
19215 # 0 1 0 1 1200 baud
19216 # 1 0 0 0 2400 baud
19217 # 1 0 1 0 4800 baud
19218 # 1 1 0 0 9600 baud
19219 # 1 1 0 1 19.2K baud
19221 # 4 = parity (0 = no parity)
19222 # 5 = even parity (0 = odd parity)
19223 # 6 = stick parity (0 = normal parity)
19224 # 7 = full duplex (0 = half duplex)
19227 # 0 = block cursor (0 = underscore cursor)
19228 # 1 = no key click (0 = keyclick)
19229 # 2 = wrap at end of line (0 = no wrap)
19230 # 3 = auto LF on CR (0 = no LF on CR)
19231 # 4 = auto CR on LF (0 = no CR on LF)
19232 # 5 = ANSI mode (0 = VT52 mode)
19233 # 6 = keypad shifted (0 = keypad unshifted)
19234 # 7 = 50Hz refresh (1 = 60Hz refresh)
19236 # Factory Default settings are as follows:
19238 # S401 1 0 0 0 1 1 0 0
19239 # S402 0 0 0 0 0 0 0 0
19240 # (h19: I added <rmam>/<smam> based on the init string;
19241 # also added empty <acsc> to suppress a tic warning -- esr)
19242 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
19243 OTbs, am, mir, msgr,
19244 cols#80, it#8, lines#24,
19245 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
19246 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
19247 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
19248 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
19249 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
19250 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
19251 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
19252 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
19253 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
19254 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
19255 h19-bs|heathkit w/keypad shifted,
19256 rmkx=\Eu, smkx=\Et, use=h19-b,
19257 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19258 rmkx=\Eu, smkx=\Et, use=h19-u,
19259 # (h19: merged in <ip> from BSDI hp19-e entry>;
19260 # also added empty <acsc> to suppress a tic warning --esr)
19261 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
19262 # Tim tells us that:
19263 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19264 # This terminal suffers from the same famous insert-mode padding lossage
19265 # that has been acknowledged for the Z29 terminal. Emacs is nearly
19266 # unusable on this box, since even a half-scroll up or down the window
19267 # causes flaming terminal death.
19269 # On the Z19, the only way I have found around this problem is to remove
19270 # the :al: and :dl: entries entirely. No amount of extra padding will
19271 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
19272 # makes Emacs a little slower, but it remains in the land of the living.
19274 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
19275 OTbs, am, eslok, hs, mir, msgr,
19276 cols#80, it#8, lines#24,
19277 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
19278 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19279 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
19280 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
19281 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19282 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
19283 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
19284 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19285 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
19286 h19-u|heathkit with underscore cursor,
19287 cnorm@, cvvis@, use=h19-b,
19288 h19-g|h19g|heathkit w/block cursor,
19289 cnorm=\Ex4, cvvis@, use=h19-b,
19290 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
19292 dl1=\EM, il1=\EL, use=h19,
19294 # The major problem with the Z29 is that it requires more padding than the Z19.
19296 # The problem with declaring an H19 to be synonymous with a Z29 is that
19297 # it needs more padding. It especially loses if a program attempts
19298 # to put the Z29 into insert mode and insert text at 9600 baud. It
19299 # even loses worse if the program attempts to insert tabs at 9600
19300 # baud. Adding padding to text that is inserted loses because in
19301 # order to make the Z29 not die, one must add so much padding that
19302 # whenever the program tries to use insert mode, the effective
19303 # rate is about 110 baud.
19305 # What program would want to put the terminal into insert mode
19306 # and shove stuff at it at 9600 baud you ask?
19308 # Emacs. Emacs seems to want to do the mathematically optimal
19309 # thing in doing a redisplay rather than the practical thing.
19310 # When it is about to output a line on top of a line that is
19311 # already on the screen, instead of just killing to the end of
19312 # the line and outputting the new line, it compares the old line
19313 # and the new line and if there are any similarities, it
19314 # constructs the new line by deleting the text on the old line
19315 # on the terminal that is already there and then inserting new
19316 # text into the line to transform it into the new line that is
19317 # to be displayed. The Z29 does not react kindly to this.
19319 # But don't cry for too long.... There is a solution. You can make
19320 # a termcap entry for the Z29 that says the Z29 has no insert mode.
19321 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19322 # line will be really slow", you say. Well there is a sort of a
19323 # solution to that too. There is an insert character option on
19324 # the Z29 that will insert one character. Unfortunately, it
19325 # involves putting the terminal into ansi mode, inserting the
19326 # character, and changing it back to H19 mode. All this takes 12
19327 # characters. Pretty expensive to insert one character, but it
19328 # works. Either Emacs doesn't try to use its inserting hack when
19329 # it's only given an insert character ability or the Z29 doesn't
19330 # require padding with this (the former is probably more likely,
19331 # but I haven't checked it out).
19332 # (z29: added empty <acsc> to suppress a tic warning, merged in
19333 # status line capabilities from BRL entry --esr)
19334 z29|zenith29|z29b|zenith z29b,
19335 OTbs, OTpt, am, eslok, hs, mir, msgr,
19336 OTkn#10, cols#80, lines#24,
19337 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
19338 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19339 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
19340 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
19341 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
19342 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
19343 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19344 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
19345 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
19346 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
19347 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
19348 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19349 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
19350 # the world is stable. <rs1> causes the terminal to be reset to the state
19351 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
19352 # cursor, bc -> block cursor.
19353 # From: Mike Meyers
19354 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
19355 # looks vt100-compatible -- esr)
19356 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
19357 OTbs, OTpt, am, eslok, hs, mir, msgr,
19358 OTkn#10, cols#80, it#8, lines#24,
19359 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
19360 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19361 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19362 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19363 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19364 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
19365 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
19366 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
19367 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
19368 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
19369 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
19370 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
19371 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
19372 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
19373 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
19374 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
19375 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
19376 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
19378 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
19379 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
19381 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
19382 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
19384 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
19385 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
19386 am, eslok, hs, mc5i, mir, msgr, xon,
19388 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19389 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
19390 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
19391 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19392 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19393 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19394 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19395 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
19396 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
19397 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
19398 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
19399 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
19400 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19401 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
19402 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
19403 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
19404 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
19405 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19406 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
19408 # From: Brad Brahms <Brahms@USC-ECLC>
19409 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
19410 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19411 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
19412 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
19413 OTbs, OTpt, mir, msgr,
19414 OTkn#10, cols#80, it#8, lines#24,
19415 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
19416 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
19417 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
19418 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
19419 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
19420 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
19421 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
19422 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19423 smir=\E@, smso=\Ep,
19424 p19|h19-b with il1/dl1,
19425 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19426 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
19427 # (ztx: removed duplicate :sr: -- esr)
19428 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
19429 OTbs, am, eslok, hs,
19430 cols#80, it#8, lines#24,
19431 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
19432 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19433 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
19434 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
19435 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
19436 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
19437 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
19438 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19440 #### IMS International (ims)
19442 # There was a company called IMS International located in Carson City,
19443 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
19444 # bus/Z80 hardware and a line of terminals called Ultimas.
19447 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
19448 ims950-b|bare ims950 no init string,
19450 # (ims950: removed obsolete ":ko@:" -- esr)
19451 ims950|ims televideo 950 emulation,
19453 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19454 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19455 # (ims950-rv: removed obsolete ":ko@:" -- esr)
19456 ims950-rv|ims tvi950 rev video,
19458 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19459 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19460 ims-ansi|ultima2|ultimaII|IMS Ultima II,
19462 cols#80, it#8, lines#24,
19463 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
19464 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
19465 ht=^I, if=/usr/share/tabset/vt100,
19466 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
19467 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
19468 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
19471 #### Intertec Data Systems
19473 # I think this company is long dead as of 1995. They made an early CP/M
19474 # micro called the "Intertec Superbrain" that was moderately popular,
19475 # then sank out of sight.
19478 superbrain|intertec superbrain,
19481 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
19482 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
19483 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
19484 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
19485 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
19486 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
19487 # and the reverse is actually true. Try it. -- esr)
19488 intertube|intertec|Intertec InterTube,
19491 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
19492 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
19493 ind=^J, rmso=\E0@, smso=\E0P,
19494 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
19495 # are typing and a command comes in, the keystrokes you type get interspersed
19496 # with the command and it messes up
19497 intertube2|intertec data systems intertube 2,
19499 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
19500 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
19501 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19503 #### Ithaca Intersystems
19505 # This company made S100-bus personal computers long ago in the pre-IBM-PC
19506 # past. They used to be reachable at:
19508 # Ithaca Intersystems
19509 # 1650 Hanshaw Road
19510 # Ithaca, New York 14850
19512 # However, the outfit went bankrupt years ago.
19515 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19516 # These entries were written (originally in termcap syntax) by Brian Yandell
19517 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19518 # University of Wisconsin.
19520 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19521 # removed <if=/usr/share/tabset/init.graphos> and
19522 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19523 graphos|graphos III,
19525 cols#80, it#8, lines#24,
19526 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19527 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19528 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19529 cuu=\E[%p1%dA, cuu1=\E[A,
19530 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19531 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19532 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19533 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19534 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19535 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19536 smir=\E[4h, smso=\E[7m,
19537 graphos-30|graphos III with 30 lines,
19539 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19543 # These people used to be reachable at:
19546 # 1393 Main Street,
19547 # Waltham, MA 02154
19548 # Vox: (617)-890-5796.
19550 # However, if you call that number today you'll get an insurance company.
19551 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19552 # 26 Feb 1997 that says:
19554 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19555 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19556 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19557 # panel-mount etc). I can be emailed at sonfour@aol.com
19559 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19560 # dated 1984. According to the manual, it featured Tek 4010/4014
19561 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19564 modgraph|mod24|modgraph terminal emulating vt100,
19567 cvvis=\E\^9;0s\E\^7;1s,
19568 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19569 rf@, ri=\EM\E[K$<5/>, use=vt100,
19570 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19571 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19573 cols#80, it#8, lines#24,
19574 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
19575 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
19576 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19577 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19580 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19581 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19582 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19583 # mark and using delete-to-killbuffer work correctly. However, we would
19584 # like normal mode of operation to be using a Modgraph with 48 line setting.
19585 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19586 # the setting mark and delete-to-killbuffer results in the deletion of only
19587 # the line the mark is set on.
19588 # We've discovered that the delete-to-killbuffer works correctly
19589 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19590 # the first line disappears but a ctrl-l shows that it did work
19592 modgraph48|mod|Modgraph w/48 lines,
19593 OTbs, OTpt, am, xenl,
19594 cols#80, it#8, lines#48, vt#3,
19595 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19596 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19597 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19598 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19599 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19600 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19601 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19602 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19603 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19604 smso=\E[7m, smul=\E[4m,
19606 #### Morrow Designs
19608 # This was George Morrow's company. They started in the late 1970s making
19609 # S100-bus machines. They used to be reachable at:
19612 # 600 McCormick St.
19613 # San Leandro, CA 94577
19615 # but they're long gone now (1995).
19618 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19619 # Jeff's specimen was dated June 1984.
19620 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19621 mt70|mt-70|Morrow MD-70; native Morrow mode,
19622 am, mir, msgr, xon,
19623 cols#80, it#8, lines#24,
19624 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19625 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
19626 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
19627 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
19628 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
19629 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
19630 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
19631 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
19632 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
19633 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
19634 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19635 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
19636 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
19637 smul=\EG1, tbc=\E0, use=adm+sgr,
19642 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
19644 ex155|Motorola Exorterm 155,
19646 OTkn#5, OTug#1, cols#80, lines#24,
19647 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
19648 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
19649 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
19650 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
19651 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
19655 # This company is still around in 1995, manufacturing point-of-sale systems.
19657 omron|Omron 8025AG,
19660 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
19661 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
19662 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
19666 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
19667 # were competition for things like the Tektronics 4025.
19670 # Ramtek 6221 from BRL, probably by Doug Gwyn
19671 # The following SET-UP modes are assumed for normal operation:
19672 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
19673 # NEWLINE_OFF 80_COLUMNS
19674 # Other SET-UP modes may be set for operator convenience or communication
19675 # requirements; I recommend
19676 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
19677 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
19678 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19679 # Note that the Control-E key is useless on this brain-damaged terminal. No
19680 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19681 rt6221|Ramtek 6221 80x24,
19682 OTbs, OTpt, msgr, xon,
19683 OTkn#4, cols#80, it#8, lines#24, vt#3,
19684 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
19685 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
19686 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19687 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
19688 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
19689 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
19690 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19691 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
19692 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
19693 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
19694 rmso=\E[m, rmul=\E[m,
19695 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
19696 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
19697 smul=\E[4m, tbc=\E[3g,
19698 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
19699 rt6221-w|Ramtek 6221 160x48,
19700 cols#160, lines#48,
19701 ll=\E[48;1H, use=rt6221,
19706 # RCA VP3301 or VP3501
19707 rca|rca vp3301/vp3501,
19710 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19711 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
19717 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
19718 # The following SET-UP modes are assumed for normal operation:
19719 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
19720 # ONLINE ANSI CURSOR_VISIBLE
19721 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
19722 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
19723 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
19724 # For use with graphics software, all graphics modes should be set to factory
19725 # default. Other SET-UP modes may be set for operator convenience or
19726 # communication requirements. No delays are specified; use "stty ixon -ixany"
19727 # to enable DC3/DC1 flow control!
19728 # I commented out the scrolling capabilities since they are too slow.
19729 hirez100|Selanar HiREZ-100,
19730 OTbs, OTpt, mir, msgr, xon,
19731 OTkn#4, cols#80, it#8, lines#48, vt#3,
19732 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
19733 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19734 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19735 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
19736 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19737 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
19738 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
19739 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
19740 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
19741 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
19742 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19743 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
19744 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
19745 smul=\E[4m, tbc=\E[3g,
19746 hirez100-w|Selanar HiREZ-100 in 132-column mode,
19747 cols#132, use=hirez100,
19752 # From University of Wisconsin
19753 vsc|Signetics Vsc Video driver by RMC,
19755 cols#80, it#8, lines#26,
19756 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
19757 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19758 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
19759 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
19763 # Alan Frisbie <frisbie@flying-disk.com> writes:
19765 # As you may recall, the Soroc logo consisted of their name,
19766 # with the letter "S" superimposed over an odd design. This
19767 # consisted of a circle with a slightly smaller 15 degree (approx.)
19768 # wedge with rounded corners inside it. The color was sort of
19769 # a metallic gold/yellow.
19771 # If I had been more of a beer drinker it might have been obvious
19772 # to me, but it took a clue from their service department to make
19773 # me exclaim, "Of course!" The circular object was the top of
19774 # a beer can (the old removable pop-top style) and "Soroc" was an
19775 # anagram for "Coors".
19777 # I can just imagine the founders of the company sitting around
19778 # one evening, tossing back a few and trying to decide what to
19779 # call their new company and what to use for a logo.
19782 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
19783 soroc120|iq120|soroc|soroc iq120,
19784 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
19785 kcuf1=^L, kcuu1=^K, use=adm3a,
19786 soroc140|iq140|soroc iq140,
19789 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19790 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
19791 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
19792 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
19793 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19794 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
19795 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
19797 #### Southwest Technical Products
19799 # These guys made an early personal micro called the M6800.
19800 # The ct82 was probably its console terminal.
19803 # (swtp: removed obsolete ":bc=^D:" -- esr)
19804 swtp|ct82|southwest technical products ct82,
19807 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19808 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19809 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19810 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19811 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19815 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19817 # Synertek used to make ICs, various 6502-based single-board process
19818 # control and hobbyist computers, and assorted peripherals including a
19819 # series of small inexpensive terminals (I think they were one of the
19820 # first to have a "terminal-on-a-keyboard", where the terminal itself
19821 # was only slightly larger than the keyboard).
19823 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19824 # was a 40x24 terminal that could connect to a standard TV through a
19825 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19826 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19827 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19828 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19829 # ROM and 2 ROMs as character generators. They were incredibly simple,
19830 # and I've never had any problems with mine (witness the fact that mine
19831 # was made in 1981 and is still working great... I've blown the video
19832 # output transistor a couple of times, but it's a 2N2222 :-)
19834 # The KTM-3 (which is what is listed in the terminfo file) was their
19835 # attempt at putting a KTM-2 in a box (and some models came with a
19836 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19837 # control and escape sequences are very different. The KTM-3 was always
19838 # real broken, at least according to the folks I've talked to about it.
19840 # The padding in the entry is probably off--these terminals were very
19841 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19842 # anyone with any sanity replaced the ROMs with something that provided
19843 # a reasonable subset of VT100 functionality, since the usual ROMs were
19844 # obviously very primitive... oh, you could get an upgraded ROM from
19845 # Synertek for some incredible amount of money, but what hacker with an
19846 # EPROM burner would do that? :)
19848 # Sorry I don't have any contact info; I believe they were located in
19849 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19850 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19851 # business these days.
19854 # Tested, seems to work fine with vi.
19855 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19858 clear=^Z, cub1=^H, cuf1=^L,
19859 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19861 #### Tab Office Products
19863 # TAB Products Co. - Palo Alto, California
19864 # Electronic Office Products,
19865 # 1451 California Avenue 94304
19867 # I think they're out of business.
19870 # The tab 132 uses xon/xoff, so no padding needed.
19871 # <smkx>/<rmkx> have nothing to do with arrow keys.
19872 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19873 # Seems to be no way to get rid of status line.
19874 # The manual for this puppy was dated June 1981. It claims to be VT52-
19875 # compatible but looks more vt100-like.
19876 tab132|tab|tab132-15|tab 132/15,
19878 OTdN@, cols#80, lines#24, lm#96,
19879 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
19880 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
19881 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
19882 tab132-w|tab132 in wide mode,
19884 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
19885 tab132-rv|tab132 in reverse-video mode,
19886 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
19887 tab132-w-rv|tab132 in reverse-video/wide mode,
19888 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
19893 # Research Incorporated
19894 # 6425 Flying Cloud Drive
19895 # Eden Prairie, MN 55344
19896 # Vox: (612)-941-3300
19898 # The Teleray terminals were all discontinued in 1992-93. RI still services
19899 # and repairs these beasts, but no longer manufactures them. The Teleray
19900 # people believe that all the types listed below are very rare now (1995).
19901 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
19902 # Model 100) that were ANSI-compatible.
19904 # Note two things called "teleray". Reorder should move the common one
19905 # to the front if you have either. A dumb teleray with the cursor stuck
19906 # on the bottom and no obvious model number is probably a 3700.
19909 t3700|dumb teleray 3700,
19912 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19913 t3800|teleray 3800 series,
19915 cols#80, it#8, lines#24,
19916 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19917 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19918 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19919 t1061|teleray|teleray 1061,
19920 OTbs, am, km, xhp, xt,
19921 cols#80, it#8, lines#24, xmc#1,
19922 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19923 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19924 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19925 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19926 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19927 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19928 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19930 t1061f|teleray 1061 with fast PROMs,
19931 dl1=\EM, il1=\EL, ip@, use=t1061,
19932 # "Teleray Arpa Special", officially designated as
19933 # "Teleray Arpa network model 10" with "Special feature 720".
19934 # This is the new (1981) fast microcode updating the older "arpa" proms
19935 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19936 # converts the keypad to programmable function keys, and has other goodies.
19937 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19938 # programs handle such lossage properly.
19939 # Note: this is NOT the old termcap's "t1061f with fast proms."
19940 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19941 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19942 t10|teleray 10 special,
19944 cols#80, it#8, lines#24, xmc#2,
19945 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
19946 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19947 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19948 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19950 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19951 # back/forth words. Put the function keys (f1-f10) where they can be
19952 # found, and turn off the other magic keys along the top row, except
19953 # for line/local. Do the magic appropriate to make the page shifts work.
19954 # Also toggle ^S/^Q for those of us who use Emacs.
19956 am, da, db, mir, xhp, xt,
19958 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19959 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19960 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19961 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19962 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19963 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19964 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19965 smso=\E[7m, smul=\E[4m,
19967 #### Texas Instruments (ti)
19970 # The Silent 700 was so called because it was built around a quiet thermal
19971 # printer. It was portable, equipped with an acoustic coupler, and pretty
19972 # neat for its day.
19973 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19976 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19979 # Texas Instruments 916 VDT 7 bit control mode
19981 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19983 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19984 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19985 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19986 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19987 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19988 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19989 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19990 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19991 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
19992 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
19993 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
19994 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
19995 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
19996 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
19999 # Texas Instruments 916 VDT 8 bit control mode
20001 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
20002 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
20003 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
20004 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
20005 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20006 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
20007 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
20009 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
20011 ti916-132|Texas Instruments 916 VDT vt220 132 column,
20012 cols#132, use=ti916,
20014 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
20016 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
20017 cols#132, use=ti916-8,
20018 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
20020 cols#80, it#8, lines#24,
20021 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20022 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20023 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20024 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20025 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20026 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20027 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
20028 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
20029 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
20030 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20031 smul=\E[4m, tbc=\E[3g,
20032 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
20034 cols#80, it#8, lines#24,
20035 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20036 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20037 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20038 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20039 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20040 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20041 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
20042 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
20043 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
20044 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
20045 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20046 smul=\E[4m, tbc=\E[3g,
20047 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
20048 cols#132, use=ti924,
20049 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
20050 cols#132, use=ti924-8,
20051 ti931|Texas Instruments 931 VDT,
20054 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
20055 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20056 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
20057 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
20058 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20059 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
20060 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
20061 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
20062 sgr0=\E4@, smso=\E4A, smul=\E4D,
20063 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
20064 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
20065 # (ti926-8: I corrected this from the broken SCO entry -- esr)
20066 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
20067 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
20068 ti_ansi|basic entry for ti928,
20069 am, bce, eo, xenl, xon,
20070 colors#8, cols#80, it#8, lines#25, pairs#64,
20071 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
20072 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20073 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
20074 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
20075 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20076 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
20077 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
20078 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
20079 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
20080 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
20081 smso=\E[7m, smul=\E[4m,
20083 # 928 VDT 7 bit control mode
20085 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
20086 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
20087 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
20088 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
20089 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20090 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
20092 # 928 VDT 8 bit control mode
20094 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
20095 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
20096 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
20097 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
20098 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
20099 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
20100 kpp=\233T, kprt=\23335~, use=ti_ansi,
20105 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
20106 # had just <smso>=\EG6 which I think means standout was supposed to be
20107 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
20108 # <invis> might work-- esr)
20109 zen30|z30|zentec 30,
20112 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20113 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20114 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
20115 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
20116 smul@, use=adm+sgr,
20117 # (zen50: this had extension capabilities
20118 # :BS=^U:CL=^V:CR=^B:
20119 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
20120 # which were also in the original entry -- esr)
20121 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
20122 zen50|z50|zentec zephyr,
20124 cols#80, lines#24, xmc#1,
20125 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
20126 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
20127 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
20128 rmul@, smul@, use=adm+sgr,
20130 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
20131 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
20134 blink=\EM", clear=\EH\EJ, cnorm=\EP,
20135 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
20136 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20137 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
20138 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
20139 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
20140 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
20141 smso=\EM$, smul=\EM0,
20143 ######## OBSOLETE UNIX CONSOLES
20146 #### Apollo consoles
20148 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
20149 # labeled HP700s now.
20152 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
20153 apollo|apollo console,
20156 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
20157 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
20158 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
20159 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
20160 smso=\ES, smul=\EU, vpa=\EO+\s,
20162 # We don't know whether or not the apollo guys replicated DEC's firmware bug
20163 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
20164 # both these capabilities.
20165 apollo_15P|apollo 15 inch display,
20166 rmir@, smir@, use=vt132,
20167 apollo_19L|apollo 19 inch display,
20168 rmir@, smir@, use=vt132,
20169 apollo_color|apollo color display,
20170 rmir@, smir@, use=vt132,
20172 #### Convergent Technology
20174 # Burroughs bought Convergent shortly before it merged with Univac.
20175 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
20176 # from 1991 or earlier).
20179 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
20180 # (aws: removed unknown :dn=^K: -- esr)
20181 aws|Convergent Technologies AWS workstation under UTX and Xenix,
20183 OTug#0, cols#80, lines#28, xmc#0,
20184 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
20185 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
20186 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
20187 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
20188 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
20189 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
20191 awsc|Convergent Technologies AWS workstation under CTOS,
20193 OTug#0, cols#80, lines#24, xmc#0,
20194 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
20195 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
20196 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
20197 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
20203 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
20204 # The digital uVax II's had a graphic display called a qdss. It was
20205 # supposed to be a high performance graphic accelerator, but it was
20206 # late to market and barely appeared before faster dumb frame buffers
20207 # appeared. I have only used this display while running X11. However,
20208 # during bootup, it was in text mode, and probably had a terminal emulator
20209 # within it. And that is what your termcap entry is for. In graphics
20210 # mode the screen size is 1024x864 pixels.
20211 qdss|qdcons|qdss glass tty,
20213 cols#128, lines#57,
20214 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
20215 cup=\E=%p1%c%p2%c, cuu1=^K,
20217 #### Fortune Systems consoles
20219 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
20220 # in their day; I (esr) used one myself for a year or so around 1984.
20221 # They had no graphics, though, and couldn't compete against Suns and
20225 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
20226 # (This had extension capabilities
20227 # :rv=\EH:re=\EI:rg=0:GG=0:\
20228 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
20229 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
20230 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
20231 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
20232 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
20233 # to force both magic cookie glitches off. Once upon a time, I
20234 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
20235 # function keys; thus the "Al" value for HM was certainly an error. I renamed
20236 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
20237 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
20238 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
20239 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
20240 fos|fortune|Fortune system,
20243 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
20244 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
20245 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
20246 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
20247 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
20248 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
20249 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
20250 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
20251 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
20252 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
20253 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
20254 smso=^\H`, smul=^\HP,
20256 #### Masscomp consoles
20258 # Masscomp has gone out of business. Their product line was purchased by
20259 # comany in Georgia (US) called "XS International", parts and service may
20260 # still be available through them.
20263 # (masscomp: ":MT:" changed to ":km:"; -- esr)
20264 masscomp|masscomp workstation console,
20266 cols#80, it#8, lines#24,
20267 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20268 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20269 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
20270 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
20271 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
20272 masscomp1|masscomp large screen version 1,
20273 cols#104, lines#36, use=masscomp,
20274 masscomp2|masscomp large screen version 2,
20275 cols#64, lines#21, use=masscomp,
20277 ######## OTHER OBSOLETE TYPES
20279 # These terminals are *long* dead -- these entries are retained for
20280 # historical interest only.
20283 #### Obsolete non-ANSI software emulations
20286 # CTRM terminal emulator
20287 # 1. underlining is not allowed with colors: first, is is simulated by
20288 # black on white, second, it disables background color manipulations.
20289 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
20290 # so we have to save their status in the static registers A, B and H
20291 # respectively, to be able to restore them when color changes
20292 # (because any color change turns off ALL attributes)
20293 # 3. <bold> and <rev> sequences alternate modes,
20294 # rather than simply entering them. Thus we have to check the
20295 # static register B and H to determine the status, before sending the
20297 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
20298 # and then reset colors
20299 # 5. implementation of the protect mode would badly penalize the performance.
20300 # we would have to use \E&bn sequence to turn off colors (as well as all
20301 # other attributes), and keep the status of protect mode in yet another
20302 # static variable. If someone really needs this mode, they would have to
20303 # create another terminfo entry.
20304 # 6. original color-pair is white on black.
20305 # store the information about colors into static registers
20306 # 7. set foreground color. it performs the following steps.
20307 # 1) turn off all attributes
20308 # 2) turn on the background and video attributes that have been turned
20309 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
20310 # 3) turn on foreground attributes
20311 # 4) store information about foreground into U,V,W static registers
20312 # 8. turn on background: similar to turn on foreground above
20313 ctrm|C terminal emulator,
20315 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
20316 pairs#63, pb#19200, vt#6,
20317 bel=^G, blink=\E&dA%{1}%PA,
20318 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
20319 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20320 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
20321 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
20322 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
20323 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
20324 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
20325 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
20326 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
20327 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
20328 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
20329 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
20330 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
20331 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
20332 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
20334 # gs6300 - can't use blue foreground, it clashes with underline;
20335 # it's simulated with cyan
20336 # Bug: The <op> capability probably resets attributes.
20337 # (gs6300: commented out <rmln> (no <smln>) --esr)
20338 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
20339 am, bce, msgr, xon,
20340 colors#8, cols#80, it#8, lines#24, pairs#63,
20341 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20342 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
20343 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20344 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20345 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20346 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20347 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
20348 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
20349 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
20350 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
20351 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
20352 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
20353 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
20354 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
20356 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
20357 # MS-Kermit with Heath-19 emulation mode enabled
20358 # (h19k: changed ":pt@:" to ":it@"
20359 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
20364 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
20365 # Software (formerly Peripherals Computers & Supplies, Inc) of
20366 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
20367 # also be reached at support@synergy.com.
20368 versaterm|versaterm vt100 emulator for the macintosh,
20370 cols#80, it#8, lines#24,
20371 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20372 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
20373 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
20374 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
20375 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
20376 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
20377 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
20378 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
20379 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
20380 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
20381 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
20382 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
20385 # From: Rick Thomas <ihnp4!btlunix!rbt>
20386 # (xtalk: I added <rmam>/<smam> based on the init string.
20387 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
20388 am, mir, msgr, xon,
20389 cols#80, it#8, lines#24, vt#3, xmc#1,
20390 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20391 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
20392 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20393 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20394 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
20395 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
20396 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
20397 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20398 rmkx=\E[?1l\E>, rmso=\E[m\s,
20399 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
20400 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
20401 tbc=\E[3g, use=vt100+fnkeys,
20403 # The official PC terminal emulator program of the AT&T Product Centers.
20404 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
20405 simterm|attpc running simterm,
20408 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20409 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
20410 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
20411 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
20413 #### Daisy wheel printers
20415 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
20416 # wheel terminals. These are now largely obsolete.
20419 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
20420 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
20423 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
20424 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
20425 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
20427 is2=\r \E9, use=diablo1620,
20428 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
20429 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
20430 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
20432 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
20434 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
20436 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
20437 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
20439 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
20440 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
20441 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
20442 # If no tab is set or the terminal's in a bad mood, it glitches the screen
20443 # around all of memory. Note that return puts a blank ("a return character")
20444 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
20445 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
20446 # curses won't work (some old BSD versions) because it doesn't clear this bit,
20447 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
20448 # I have been unable to get tabs set in all 96 lines - it always leaves at
20449 # least one line with no tabs in it, and once you tab through that line,
20450 # it completely weirds out.
20451 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
20454 cols#80, lines#24, lm#96,
20455 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
20456 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
20457 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
20458 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
20459 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
20463 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20464 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20465 gsi|mystery gsi terminal,
20468 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
20470 aj830|aj832|aj|anderson jacobson,
20472 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
20474 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
20475 aj510|Anderson-Jacobson model 510,
20478 clear=^L, cub1=^H, cuf1=\EX,
20479 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
20480 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
20481 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
20482 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
20483 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
20485 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
20486 # This is incomplete, but it's a start.
20487 nec5520|nec|spinwriter|nec 5520,
20490 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
20491 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
20493 qume5|qume|Qume Sprint 5,
20496 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20497 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20498 # I suspect the xerox 1720 is the same as the diablo 1620.
20499 xerox1720|x1720|x1750|xerox 1720,
20502 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
20505 #### Miscellaneous obsolete terminals, manufacturers unknown
20507 # If you have any information about these (like, a manufacturer's name,
20508 # and a date on the serial-number plate) please send it!
20510 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
20513 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
20514 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
20517 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
20518 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
20519 kf4=\E8, rmso=\Em^C, smso=\Em^L,
20520 cops10|cops|cops-10|cops 10,
20523 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20524 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
20525 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
20527 # (d132: removed duplicate :ic=\E5:,
20528 # merged in capabilities from a BRL entry -- esr)
20529 d132|datagraphix|datagraphix 132a,
20532 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
20533 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
20534 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
20535 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
20536 # The d800 was an early portable terminal from c.1984-85 that looked a lot
20537 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
20538 # mode (which is what this entry looks like) and several other lesser-known
20541 OTbs, am, da, db, msgr, xhp,
20542 cols#80, it#8, lines#24,
20543 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20544 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
20545 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20546 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
20547 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
20548 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
20549 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20550 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
20551 digilog|digilog 333,
20554 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
20556 # The DWK was a terminal manufactured in the Soviet Union c.1986
20557 dwk|dwk-vt|dwk terminal,
20559 cols#80, it#8, lines#24,
20560 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
20561 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20562 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
20563 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
20564 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
20565 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
20566 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
20567 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
20568 sgr0=\EX, smacs=\EF, smso=\ET,
20569 env230|envision230|envision 230 graphics terminal,
20571 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
20572 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
20573 sgr0=\E[0m$<2>, smacs@, use=vt100,
20574 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
20575 # coupler attached, the whole rig fitting in a suitcase and more or less
20576 # portable. Hot stuff for c.1977 :-) -- esr
20577 ep48|ep4080|execuport 4080,
20580 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
20581 ep40|ep4000|execuport 4000,
20582 cols#136, use=ep4080,
20583 # Adam Thompson <athompso@pangea.ca> tells us:
20584 # Informer series - these are all portable units, resembling older
20585 # automatic bread-baking machines. The terminal looks like a `clamshell'
20586 # design, but isn't. The structure is similar to the Direct terminals,
20587 # but only half the width. The entire unit is only about 10" wide.
20588 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20589 # keyboard. All the keys are crammed together, much like some laptop
20590 # PCs today, but perhaps less well organized...all these units have a
20591 # bewildering array of plugs on the back, including a built-in modem.
20592 # The 305 was a color version of the 304; the 306 and 307 were mono and
20593 # color terminals built for IBM bisync protocols.
20594 # From: Paul Leondis <unllab@amber.berkeley.edu>
20595 ifmr|Informer D304,
20598 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
20599 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
20600 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
20602 # Entry largely based on wy60 and has the features of wy60ak.
20603 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
20604 am, bw, hs, km, mir, msgr, ul, xon,
20605 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
20606 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
20607 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
20608 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
20609 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
20610 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
20611 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
20613 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
20614 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
20615 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
20616 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
20617 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
20618 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20619 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20620 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
20621 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
20622 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
20623 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
20624 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
20625 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
20626 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
20627 rs3=\EwG\Ee($<150>,
20628 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
20629 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
20630 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
20631 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
20632 uc=\EG8\EG0, use=adm+sgr,
20633 teletec|Teletec Datascreen,
20636 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
20638 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
20639 # This description is for the LANPAR Technologies VISION 3220
20640 # terminal from 1984/85. The function key definitions k0-k5 represent the
20641 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
20642 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
20644 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
20645 # I had a couple of scopes (3221) like this once where I used to work, around
20646 # the 1987 time frame if memory serves me correctly. These scopes were made
20647 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
20648 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
20649 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
20650 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
20651 # (3221) cost about $1500 each, and one was always broken -- had to be sent
20652 # back to the shop for repairs.
20653 # The only real advantage these scopes had over the VT-240's were:
20654 # 1) They were faster in the Regis display, or at least the ones I did
20655 # 2) They had a handy debugging feature where you could split-screen the
20656 # scope, the graphics would appear on the top, and the REGIS commands would
20657 # appear on the bottom. I don't remember the VT-240s being able to do that.
20658 # I would swear that LANPAR Technologies was in MA someplace, but since I
20659 # don't work at the same place anymore, and those terminals and manuals were
20660 # long since junked, I cannot be any more sure than that.
20662 # (v3220: removed obsolete ":kn#10:",
20663 # I added <rmam>/<smam> based on the init string -- esr)
20664 v3220|LANPAR Vision II model 3220/3221/3222,
20665 OTbs, am, mir, xenl,
20666 cols#80, it#8, lines#24,
20667 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20668 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20669 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
20670 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
20671 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
20672 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
20673 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
20674 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20675 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
20676 ######## ICH/ICH1 VERSUS RMIR/SMIR
20678 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
20679 # are present; the symptom is doubled characters in an update using insert.
20680 # These applications are technically correct; in both 4.3BSD termcap and
20681 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
20682 # unless the terminal needs both. To my knowledge, no terminal still in this
20683 # file requires both other than the very obsolete dm2500.
20685 # For ncurses-based applications this is not a problem, as ncurses uses
20686 # one or the other as appropriate but never mixes the two. Therefore we
20687 # have not corrected entries like `linux' and `xterm' that specify both.
20688 # If you see doubled characters from these, use the linux-nic and xterm-nic
20689 # entries that suppress ich/ich1. And upgrade to ncurses!
20692 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
20694 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
20695 # ECMA-48 standards are said to be almost identical, but are not the same
20696 # as X3.64 (though for practical purposes they are close supersets of it).
20698 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
20699 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
20700 # Coded Character Sets"), include your snail-mail address, and you should
20701 # receive the document in due course. Don't expect an email acknowledgement.
20703 # Related standards include "X3.4-1977: American National Standard Code for
20704 # Information Interchange" (the ASCII standard) and "X3.41.1974:
20705 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
20706 # American National Standard for Information Interchange." I believe (but
20707 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
20711 #### VT100/ANSI/ECMA-48
20713 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
20714 # and ECMA-48 Control Functions for Coded Character Sets.
20716 # Much of the content of this comment is adapted from a table prepared by
20717 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
20718 # discussion of some terminfo-related issues, and updates to capture ECMA-48
20719 # have been added. Control functions described in ECMA-48 only are tagged
20720 # with * after their names.
20722 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
20723 # sequences. In the main table, \E stands for an escape (\033) character,
20724 # SPC for space. Pn stands for a single numeric parameter to be inserted
20725 # in decimal ASCII. Ps stands for a list of such parameters separated by
20726 # semicolons. Parameter meanings for most parametrized sequences are
20727 # decribed in the notes.
20729 # Sequence Sequence Parameter or
20730 # Mnemonic Name Sequence Value Mode terminfo
20731 # -----------------------------------------------------------------------------
20732 # APC Applicatn Program Command \E _ - Delim -
20733 # BEL Bell * ^G - - bel
20734 # BPH Break Permitted Here * \E B - * -
20735 # BS Backpace * ^H - EF -
20736 # CAN Cancel * ^X - - - (A)
20737 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
20738 # CCH Cancel Previous Character \E T - - -
20739 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
20740 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
20741 # CMD Coding Method Delimiter * \E
20742 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
20743 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
20744 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
20745 # CSI Control Sequence Intro \E [ - Intro -
20746 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
20747 # CUB Cursor Backward \E [ Pn D 1 eF cub
20748 # CUD Cursor Down \E [ Pn B 1 eF cud
20749 # CUF Cursor Forward \E [ Pn C 1 eF cuf
20750 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
20751 # CUU Cursor Up \E [ Pn A 1 eF cuu
20752 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
20753 # DA Device Attributes \E [ Pn c 0 - -
20754 # DAQ Define Area Qualification \E [ Ps o 0 - -
20755 # DCH Delete Character \E [ Pn P 1 eF dch
20756 # DCS Device Control String \E P - Delim -
20757 # DL Delete Line \E [ Pn M 1 eF dl
20758 # DLE Data Link Escape * ^P - - -
20759 # DMI Disable Manual Input \E \ - Fs -
20760 # DSR Device Status Report \E [ Ps n 0 - - (I)
20761 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
20762 # EA Erase in Area \E [ Ps O 0 eF - (J)
20763 # ECH Erase Character \E [ Pn X 1 eF ech
20764 # ED Erase in Display \E [ Ps J 0 eF ed (J)
20765 # EF Erase in Field \E [ Ps N 0 eF -
20766 # EL Erase in Line \E [ Ps K 0 eF el (J)
20767 # EM End of Medium * ^Y - - -
20768 # EMI Enable Manual Input \E b Fs -
20769 # ENQ Enquire ^E - - -
20770 # EOT End Of Transmission ^D - * -
20771 # EPA End of Protected Area \E W - - - (K)
20772 # ESA End of Selected Area \E G - - -
20773 # ESC Escape ^[ - - -
20774 # ETB End Transmission Block ^W - - -
20775 # ETX End of Text ^C - - -
20776 # FF Form Feed ^L - - -
20777 # FNK Function Key * \E [ Pn SPC W - - -
20778 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
20779 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
20780 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
20781 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
20782 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
20783 # HPB Char Position Backward \E [ j 1 FE -
20784 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
20785 # HT Horizontal Tab * ^I - FE - (N)
20786 # HTJ Horz Tab w/Justification \E I - FE -
20787 # HTS Horizontal Tab Set \E H - FE hts
20788 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
20789 # ICH Insert Character \E [ Pn @ 1 eF ich
20790 # IDCS ID Device Control String \E [ SPC O - * -
20791 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
20792 # IL Insert Line \E [ Pn L 1 eF il
20793 # IND Index \E D - FE -
20794 # INT Interrupt \E a - Fs -
20795 # JFY Justify \E [ Ps SPC F 0 FE -
20796 # IS1 Info Separator #1 * ^_ - * -
20797 # IS2 Info Separator #1 * ^^ - * -
20798 # IS3 Info Separator #1 * ^] - * -
20799 # IS4 Info Separator #1 * ^\ - * -
20800 # LF Line Feed ^J - - -
20801 # LS1R Locking Shift Right 1 * \E ~ - - -
20802 # LS2 Locking Shift 2 * \E n - - -
20803 # LS2R Locking Shift Right 2 * \E } - - -
20804 # LS3 Locking Shift 3 * \E o - - -
20805 # LS3R Locking Shift Right 3 * \E | - - -
20806 # MC Media Copy \E [ Ps i 0 - - (S)
20807 # MW Message Waiting \E U - - -
20808 # NAK Negative Acknowledge * ^U - * -
20809 # NBH No Break Here * \E C - - -
20810 # NEL Next Line \E E - FE nel (D)
20811 # NP Next Page \E [ Pn U 1 eF -
20812 # NUL Null * ^@ - - -
20813 # OSC Operating System Command \E ] - Delim -
20814 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
20815 # PFS Page Format Selection * \E Pn SPC J 0 - -
20816 # PLD Partial Line Down \E K - FE - (T)
20817 # PLU Partial Line Up \E L - FE - (U)
20818 # PM Privacy Message \E ^ - Delim -
20819 # PP Preceding Page \E [ Pn V 1 eF -
20820 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
20821 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
20822 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
20823 # PTX Parallel Texts * \E [ \ - - -
20824 # PU1 Private Use 1 \E Q - - -
20825 # PU2 Private Use 2 \E R - - -
20826 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
20827 # REP Repeat Char or Control \E [ Pn b 1 - rep
20828 # RI Reverse Index \E M - FE - (V)
20829 # RIS Reset to Initial State \E c - Fs -
20830 # RM Reset Mode * \E [ Ps l - - - (W)
20831 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
20832 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
20833 # SCI Single-Char Introducer \E Z - - -
20834 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
20835 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
20836 # SD Scroll Down \E [ Pn T 1 eF rin
20837 # SDS Start Directed String * \E [ Pn ] 1 - -
20838 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
20839 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
20840 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
20841 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
20842 # SI Shift In ^O - - - (P)
20843 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
20844 # SL Scroll Left \E [ Pn SPC @ 1 eF -
20845 # SLH Set Line Home * \E [ Pn SPC U - - -
20846 # SLL Set Line Limit * \E [ Pn SPC V - - -
20847 # SLS Set Line Spacing * \E [ Pn SPC h - - -
20848 # SM Select Mode \E [ Ps h none - - (W)
20849 # SO Shift Out ^N - - - (Q)
20850 # SOH Start Of Heading * ^A - - -
20851 # SOS Start of String * \E X - - -
20852 # SPA Start of Protected Area \E V - - - (Z)
20853 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
20854 # SPH Set Page Home * \E [ Ps SPC G - - -
20855 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
20856 # SPL Set Page Limit * \E [ Ps SPC j - - -
20857 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
20858 # SR Scroll Right \E [ Pn SPC A 1 eF -
20859 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
20860 # SRS Start Reversed String * \E [ Ps [ 0 - -
20861 # SSA Start of Selected Area \E F - - -
20862 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
20863 # SSW Set Space Width * \E [ Pn SPC [ none - -
20864 # SS2 Single Shift 2 (G2 set) \E N - Intro -
20865 # SS3 Single Shift 3 (G3 set) \E O - Intro -
20866 # ST String Terminator \E \ - Delim -
20867 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
20868 # STS Set Transmit State \E S - - -
20869 # STX Start pf Text * ^B - - -
20870 # SU Scroll Up \E [ Pn S 1 eF indn
20871 # SUB Substitute * ^Z - - -
20872 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
20873 # SYN Synchronous Idle * ^F - - -
20874 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
20875 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
20876 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
20877 # TBC Tab Clear \E [ Ps g 0 FE tbc
20878 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
20879 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
20880 # TSS Thin Space Specification \E [ Pn SC E none FE -
20881 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
20882 # VPB Line Position Backward * \E [ Pn k 1 FE -
20883 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
20884 # VT Vertical Tabulation * ^K - FE -
20885 # VTS Vertical Tabulation Set \E J - FE -
20887 # ---------------------------------------------------------------------------
20891 # Some control characters are listed in the ECMA-48 standard without
20892 # being assigned functions relevant to terminal control there (they
20893 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
20894 # here anyway for completeness.
20896 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
20898 # (B) There seems to be some confusion abroad between CHA and HPA. Most
20899 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
20900 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
20901 # preserved the CHA abbreviation.
20903 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20904 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20905 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20906 # CHT abbreviation.
20908 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20910 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20913 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20914 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20915 # 5 = clear all char tabs, 6 = clear all line tabs.
20917 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20918 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20919 # Position Absolute" but retains the HVP abbreviation.
20921 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20924 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20925 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20926 # DSR, 6 = request CPR response.
20928 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20929 # 1 = clear from beginning, 2 = clear.
20931 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20933 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20935 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20936 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20937 # Position Relative" but retains the HPR abbreviation.
20939 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20942 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20943 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20944 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20945 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20946 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20947 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20948 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20949 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20950 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20951 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20952 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20953 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20954 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20955 # 61-65 = variable highlights for ideograms.
20957 # (P) SI is also called LSO, Locking Shift Zero.
20959 # (Q) SI is also called LS1, Locking Shift One.
20961 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20962 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20963 # Absolute' but retains the VPA abbreviation.
20965 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20966 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20967 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20968 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20969 # 7 = start relay to secondary aux device.
20971 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20974 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20977 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20979 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20980 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20981 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20982 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20983 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20984 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20985 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20986 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20987 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20988 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20989 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20990 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20991 # from ECMA-48's 5th edition but are listed here for reference.
20993 # (X) Select Alternate Presentation Variants is used only for non-Latin
20996 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
20998 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
21001 # ---------------------------------------------------------------------------
21005 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
21006 # X3.64 Control Sequence Introducer is the two characters "Escape ["
21008 # Delim a Delimiter
21010 # x/y identifies a character by position in the ASCII table (column/row)
21012 # eF editor function (see explanation)
21014 # FE format effector (see explanation)
21016 # F is a Final character in
21017 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
21018 # a control sequence (F from 4/0 to 7/14)
21020 # Gs is a graphic character appearing in strings (Gs ranges from
21021 # 2/0 to 7/14) in the ASCII table
21023 # Ce is a control represented as a single bit combination in the C1 set
21024 # of controls in an 8-bit character set
21026 # C0 the familiar set of 7-bit ASCII control characters
21028 # C1 roughly, the set of control chars available only in 8-bit systems.
21029 # This is too complicated to explain fully here, so read Jim Fleming's
21030 # article in the February 1983 BYTE, especially pages 214 through 224.
21032 # Fe is a Final character of a 2-character Escape sequence that has an
21033 # equivalent representation in an 8-bit environment as a Ce-type
21034 # (Fe ranges from 4/0 to 5/15)
21036 # Fs is a Final character of a 2-character Escape sequence that is
21037 # standardized internationally with identical representation in 7-bit
21038 # and 8-bit environments and is independent of the currently
21039 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
21041 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
21044 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
21047 # Pn is a numeric parameter in a control sequence, a string of zero or
21048 # more characters ranging from 3/0 to 3/9 in the ASCII table
21050 # Ps is a variable number of selective parameters in a control sequence
21051 # with each selective parameter separated from the other by the code
21052 # 3/11 (which usually represents a semicolon); Ps ranges from
21053 # 3/0 to 3/9 and includes 3/11
21055 # * Not relevant to terminal control, listed for completeness only.
21057 # Format Effectors versus Editor Functions
21059 # A format effector specifies how following output is to be displayed.
21060 # An editor function allows you to modify the display. Informally
21061 # format effectors may be destructive; format effectors should not be.
21063 # For instance, a format effector that moves the "active position" (the
21064 # cursor or equivalent) one space to the left would be useful when you want to
21065 # create an overstrike, a compound character made of two standard characters
21066 # overlaid. Control-H, the Backspace character, is actually supposed to be a
21067 # format effector, so you can do this. But many systems use it in a
21068 # nonstandard fashion, as an editor function, deleting the character to the
21069 # left of the cursor and moving the cursor left. When Control-H is assumed to
21070 # be an editor function, you cannot predict whether its use will create an
21071 # overstrike unless you also know whether the output device is in an "insert
21072 # mode" or an "overwrite mode". When Control-H is used as a format effector,
21073 # its effect can always be predicted. The familiar characters carriage
21074 # return, linefeed, formfeed, etc., are defined as format effectors.
21076 # NOTES ON THE DEC VT100 IMPLEMENTATION
21078 # Control sequences implemented in the VT100 are as follows:
21080 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
21081 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
21083 # plus several private DEC commands.
21085 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
21087 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
21088 # Erase from beginning of line to cursor Esc [ 1 K
21089 # Erase line containing cursor Esc [ 2 K
21090 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
21091 # Erase from beginning of screen to cursor Esc [ 1 J
21092 # Erase entire screen Esc [ 2 J
21094 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
21095 # Esc [ 2 J, but this is wrong; the default is 0.
21097 # The VT100 responds to receiving the DA (Device Attributes) control
21099 # Esc [ c (or Esc [ 0 c)
21101 # by transmitting the sequence
21105 # where Ps is a character that describes installed options.
21107 # The VT100's cursor location can be read with the DSR (Device Status
21112 # The VT100 reports by transmitting the CPR sequence
21116 # where Pl is the line number and Pc is the column number (in decimal).
21118 # The specification for the DEC VT100 is document EK-VT100-UG-003.
21122 # Here is a description of the color and attribute controls supported in the
21123 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
21124 # terminal emulators for Intel boxes obey these. They are a proper subset
21125 # of the ECMA-48 escapes.
21127 # 0 all attributes off
21128 # 1 foreground bright
21130 # 5 blink on/background bright (not reliable with brown)
21132 # 8 set blank (non-display)
21133 # 10 set primary font
21134 # 11 set first alternate font (on PCs, display ROM characters 1-31)
21135 # 12 set second alternate font (on PCs, display IBM high-half chars)
21137 # Color attribute sets
21138 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
21139 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
21140 # Bright black becomes gray. Bright brown becomes yellow,
21141 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
21143 # * If the 5 attribute is on and you set a background color (40-47) it is
21144 # supposed to enable bright background.
21146 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
21147 # when you try to set a "bright brown" (yellow) background with attribute
21148 # 5 (you get a blinking yellow foreground instead). A few displays
21149 # (including the System V console) support an attribute 6 that undoes this
21150 # braindamage (this is required by iBCS2).
21152 # * Some older versions of ANSI.SYS have a bug that causes thems to require
21153 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
21156 #### Intel Binary Compatibility Standard
21158 # For comparison, here are the capabilities implied by the Intel Binary
21159 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
21160 # These recommendations are optional. IBCS2 allows the leading escape to
21161 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
21162 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
21163 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
21164 # terminfo entry are followed with the corresponding capability in parens:
21166 # CSI <n>k disable (n=0) or enable (n=1) keyclick
21167 # CSI 2h lock keyboard
21168 # CSI 2i send screen as input
21169 # CSI 2l unlock keyboard
21170 # CSI 6m enable background color intensity
21171 # CSI <0-2>c reserved
21172 # CSI <0-59>m select graphic rendition
21173 # CSI <n>;<m>H (cup) cursor to line n and column m
21174 # CSI <n>;<m>f cursor to line n and column m
21175 # CSI <n>@ (ich) insert characters
21176 # CSI <n>A (cuu) cursor up n lines
21177 # CSI <n>B (cud) cursor down n lines
21178 # CSI <n>C (cuu) cursor right n characters
21179 # CSI <n>D (cud) cursor left n characters
21180 # CSI <n>E cursor down n lines and in first column
21181 # CSI <n>F cursor up n lines and in first column
21182 # CSI <n>G (hpa) position cursor at column n-1
21183 # CSI <n>J (ed) erase in display
21184 # CSI <n>K (el) erase in line
21185 # CSI <n>L (il) insert line(s)
21186 # CSI <n>P (dch) delete characters
21187 # CSI <n>S (indn) scroll up n lines
21188 # CSI <n>T (rin) scroll down n lines
21189 # CSI <n>X (ech) erase characters
21190 # CSI <n>Z (cbt) back up n tab stops
21191 # CSI <n>` cursor to column n on line
21192 # CSI <n>a (cuu) cursor right n characters
21193 # CSI <n>d (vpa) cursor to line n
21194 # CSI <n>e cursor down n lines and in first column
21195 # CSI <n>g (cbt) clear all tabs
21196 # CSI <n>z make virtual terminal n active
21197 # CSI ?7h (smam) turn automargin on
21198 # CSI ?7l (rmam) turn automargin off
21199 # CSI s save cursor position
21200 # CSI u restore cursor position to saved value
21201 # CSI =<c>A set overscan color
21202 # CSI =<c>F set normal foreground color
21203 # CSI =<c>G set normal background color
21204 # CSI =<c>H set reverse foreground color
21205 # CSI =<c>I set reverse foreground color
21206 # CSI =<c>J set graphic foreground color
21207 # CSI =<c>K set graphic foreground color
21208 # CSI =<n>g (dispc) display n from alternate graphics character set
21209 # CSI =<p>;<d>B set bell parameters
21210 # CSI =<s>;<e>C set cursor parameters
21211 # CSI =<x>D enable/disable intensity of background color
21212 # CSI =<x>E set/clear blink vs. bold background
21213 # CSI 7 (sc) (sc) save cursor position
21214 # CSI 8 (rc) (rc) restore cursor position to saved value
21215 # CSI H (hts) (hts) set tab stop
21216 # CSI Q<n><string> define function key string
21217 # (string must begin and end with delimiter char)
21218 # CSI c (clear) clear screen
21220 # The lack of any specification for attributes in SGR (among other things)
21221 # makes this a wretchedly weak standard. The table above is literally
21222 # everything iBSC2 has to say about terminal escape sequences; there is
21223 # no further discussion of their meaning or how to set the parameters
21224 # in these sequences at all.
21227 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
21229 # The historical termcap file entries were written primarily in 4.4BSD termcap.
21230 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
21231 # with the extension names chosen for compatibility with the termcap names
21232 # assigned in System V terminfo. There are some variant extension sets out
21233 # there. We try to describe them here.
21235 # XENIX extensions:
21237 # The XENIX extensions include a set of function-key capabilities as follows:
21239 # code XENIX variable name terminfo name name clashes?
21240 # ---- ------------------- ------------- -----------------------
21242 # CR key_char_right
21243 # CW key_change_window create_window
21245 # HM key_home khome
21247 # LD key_delete_line kdl1
21248 # LF key_linefeed label_off
21249 # NU key_next_unlocked_cell
21250 # PD key_page_down knp
21252 # PN start_print mc5
21254 # PS stop_print mc4
21255 # PU key_page_up kpp pulse
21256 # RC key_recalc remove_clock
21257 # RF key_toggle_ref req_for_input
21258 # RT key_return kent
21259 # UP key_up_arrow kcuu1 parm_up_cursor
21261 # WR key_word_right
21263 # The XENIX extensions also include the following character-set and highlight
21266 # XENIX terminfo function
21267 # ----- -------- ------------------------------
21268 # GS smacs start alternate character set
21269 # GE rmacs end alternate character set
21270 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
21271 # bo blink begin blink (not used in /etc/termcap)
21272 # be end blink (not used in /etc/termcap)
21273 # bb blink glitch (not used in /etc/termcap)
21274 # it dim begin dim (not used in /etc/termcap)
21275 # ie end dim (not used in /etc/termcap)
21276 # ig dim glitch (not used in /etc/termcap)
21278 # Finally, XENIX also used the following forms-drawing capabilities:
21280 # single double type ASCII approximation
21281 # ------ ------ ------------- -------------------
21282 # GV Gv vertical line |
21283 # GH Gv horizontal line - _
21284 # G1 G5 top right corner _ |
21285 # G2 G6 top left corner |
21286 # G3 G7 bottom left corner |_
21287 # G4 G8 bottom right corner _|
21288 # GD Gd down-tick character T
21289 # GL Gl left-tick character -|
21290 # GR Gr right-tick character |-
21291 # GC Gc middle intersection -|-
21292 # GU Gu up-tick character _|_
21294 # These were invented to take advantage of the IBM PC ROM character set. One
21295 # can compose an acsc string from the single-width characters as follows
21296 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
21297 # When translating a termcap file, ncurses tic will do this automatically.
21298 # The double forms characters don't fit the SVr4 terminfo model.
21302 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
21303 # nonstandard capabilities. Its signature is the KM capability, used to name
21304 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
21305 # set. Comments in the original, and a little cross-checking with other AT&T
21306 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
21307 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
21308 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
21309 # cursor invisible), and CV=:ve: (make cursor normal).
21313 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
21314 # have the System V capabilities up to SVr1 level. After that, it supports
21315 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
21316 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
21317 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
21318 # HP binary format incompatible with SVr4's.
21322 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
21323 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
21324 # capabilities following prtr_non with the following special capabilties:
21325 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
21326 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
21327 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
21328 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
21329 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
21330 # renamed (to kcbt and kslt). The places in the box[12] capabilities
21331 # correspond to acsc chars, here is the mapping:
21333 # box1[0] = ACS_ULCORNER
21334 # box1[1] = ACS_HLINE
21335 # box1[2] = ACS_URCORNER
21336 # box1[3] = ACS_VLINE
21337 # box1[4] = ACS_LRCORNER
21338 # box1[5] = ACS_LLCORNER
21339 # box1[6] = ACS_TTEE
21340 # box1[7] = ACS_RTEE
21341 # box1[8] = ACS_BTEE
21342 # box1[9] = ACS_LTEE
21343 # box1[10] = ACS_PLUS
21345 # The box2 characters are the double-line versions of these forms graphics.
21346 # The AIX binary terminfo format is incompatible with SVr4's.
21348 # Iris console extensions:
21350 # HS is half-intensity start; HE is half-intensity end
21351 # CT is color terminal type (for Curses & rogue)
21352 # CP is color change escape sequence
21353 # CZ are color names (for Curses & rogue)
21355 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
21359 # There is a set of extended termcaps associated with something
21360 # called the "Terminal Control" or TC package created by MainStream Systems,
21361 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
21362 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
21363 # that flags color terminals.
21365 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
21366 # infocmp to manipulate user-definable capabilities. Those that are intended
21367 # for use in either terminfo or termcap use 2-character names. Extended
21368 # function keys do not use 2-character names, and are available only with
21371 # As of mid-2012, no other terminfo/termcap implementation than ncurses
21372 # supports this extension; termcap libraries can as noted above make limited
21373 # use of the feature.
21375 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
21378 # SCREEN Extensions:
21380 # The screen program uses the termcap interface. It recognizes a few useful
21381 # nonstandard capabilities. Those are used in this file.
21383 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
21385 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
21386 # E0 (str) Switch charset 'G0' back to standard charset.
21387 # S0 (str) Switch charset 'G0' to the specified charset.
21388 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
21391 # AX is relatively straightforward; it is interpreted by ncurses to say that
21392 # SGR 39/49 reset the terminal's foreground and background colors to their
21395 # XT is harder, since screen's manpage does not give more details. For that,
21396 # we must read screen's source-code. When XT is set, screen assumes
21398 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
21399 # screen may also set the terminal's name, which is (for xterm) distinct
21400 # from the icon name.
21401 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
21402 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
21403 # this is an rxvt feature.
21404 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
21405 # These are from xterm, although xterm accepts mouse codes that may not be
21406 # recognized by screen, e.g., 1005, 1006.
21407 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
21408 # sequence. However, because screen uses only termcap, the values returned
21409 # by Af/Ab are not usable because they rely on expressions that termcap
21410 # does not support. Therefore, screen uses a hardcoded string to work
21411 # around the limitation.
21412 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
21414 # The other ISO-2022 features are rarely used, but provided here to make
21415 # screen's termcap features available.
21417 # XTERM Extensions:
21419 # Most of the xterm extensions are for function-keys. Since patch #94 (in
21420 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
21421 # additional function-key strings. Some other developers copied the feature,
21422 # though they did not follow xterm's lead in patch #167 (in 2002), to make
21423 # these key definitions less ambiguous.
21425 # A few terminals provide similar functionality (sending distinct keys when
21426 # a modifier is used), including rxvt.
21428 # These are the extended keys defined in this file:
21430 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
21431 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
21432 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
21433 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
21435 # Here are the other xterm-related extensions which are used in this file:
21437 # Cr is a string capability which resets the cursor color
21438 # Cs is a string capability which sets the cursor color to a given value.
21439 # The single string parameter is the color name/number, according to the
21441 # Ms modifies the selection/clipboard. Its parameters are
21442 # p1 = the storage unit (clipboard, selection or cut buffer)
21443 # p2 = the base64-encoded clipboard content.
21444 # Se resets the cursor style to the terminal power-on default.
21445 # Ss is a string capability with one numeric parameter. It is used to set the
21446 # cursor style as described by the DECSCUSR function to a block or
21448 # XM is a string capability which overrides ncurses's built-in string which
21449 # enables xterm mouse mode.
21451 # Miscellaneous extensions:
21453 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
21454 # This was implemented for the Hurd.
21455 # E3 clears the terminal's scrollback buffer. This was implemented in the
21456 # Linux 3.0 kernel as a security feature. It matches a feature which was
21457 # added in xterm patch #107.
21458 # U8 is a numeric capability which denotes a terminal emulator which does not
21459 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
21460 # value to enable it.
21462 ######## CHANGE HISTORY
21464 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
21465 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
21466 # maintained by Eric S. Raymond as part of the ncurses project.
21468 # This file contains all the capability information present in John Kunze's
21469 # last version of the termcap master file, except as noted in the change
21470 # comments at end of file. Some information about very ancient obsolete
21471 # capabilities has been moved to comments. Some all-numeric names of older
21472 # terminals have been retired.
21474 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
21475 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
21476 # used by BSD curses.
21478 # The 9.1.0 version of this file was translated from my lightly-edited copy of
21479 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
21480 # the purpose. Unless the ncurses tic implementation and the Lisp code were
21481 # making perfectly synchronized mistakes which I then failed to catch by
21482 # eyeball, the translation was correct and perfectly information-preserving.
21484 # Major version number bumps correspond to major version changes in ncurses.
21486 # Here is a log of the changes since then:
21488 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
21489 # * First terminfo master translated from 8.3.
21490 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
21491 # * Replaced Wyse entries with updated entries supplied by vendor.
21493 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
21494 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
21495 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
21496 # * Better XENIX keycap translation. Describe TC termcaps.
21497 # * Contact and history info supplied by Qume.
21498 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
21499 # * Raided the Shuford FTP site for recent termcaps/terminfos.
21500 # * Added information on X3.64 and VT100 standard escape sequences.
21501 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
21502 # * Added a correct X11R6 xterm entry.
21503 # * Fixed terminfo translations of padding.
21504 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
21505 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
21506 # * Added u6/u7/u8/u9 capabilities.
21507 # * Added PCVT entry.
21508 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
21509 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
21510 # to use reverse-video standout so Emacs will look right.
21511 # * Added el1 capability to ansi.
21512 # * Added smacs/rmacs to ansi.sys.
21514 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
21515 # * New mt70 entry.
21516 # * Added COPYRIGHTS AND OTHER DELUSIONS.
21517 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
21518 # smartvid & smarterm, ampex 175 & 219 & 232,
21519 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
21520 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
21521 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
21522 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
21523 # * Replaced the Perkin-Elmer entries with vendor's official ones.
21524 # * Restored the old minimal-ansi entry, luna needs it.
21525 # * Fixed some incorrect ip and proportional-padding translations.
21526 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
21527 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
21528 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
21529 # to force a particular height.
21530 # * Added beehive4 and reorganized other Harris entries.
21531 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
21532 # * Merged in DEC's official entries for its terminals. The only old
21533 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
21534 # * Replaced the translated BBN Bitgraph entries with purpose-built
21535 # ones from AT&T's SVr3.
21536 # * Replaced the AT&T entries with AT&T's official terminfos.
21537 # * Added teleray 16, vc415, cops10.
21538 # * Merged in many individual capabilities from SCO terminfo files.
21539 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
21541 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
21542 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
21543 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
21544 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
21545 # simterm, citoh and variants.
21546 # * Replaced sol entry with sol1 and sol2.
21547 # * Replaced Qume QVT and Freedom-series entries with purpose-built
21548 # terminfo entries.
21549 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
21550 # and dg200 entries using caps from from SCO.
21551 # * Added the usual set of function-key mappings to ANSI entry.
21552 # * Corrected xterm's function-key capabilities.
21553 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
21554 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
21555 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
21556 # * Fix in xterm entry, get the arrow keys right.
21557 # * Change some \0 escapes to \200.
21558 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
21559 # * Added apple (Videx card), adm1a, oadm31.
21560 # * Fixed malformed ampex csr.
21561 # * Fixed act4, cyb110; they had old-style prefix padding left in.
21562 # * Changed mandatory to advisory padding in many entries.
21563 # * Replaced HP entries up to hpsub with purpose-built ones.
21564 # * Blank rmir/smir/rmdc/smdc capabilities removed.
21565 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
21566 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
21567 # * Replaced the Ann Arbor entries with SCO's, the init strings are
21568 # more efficient (but the entries otherwise identical).
21569 # * Added dg211 from Shuford archive.
21570 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
21571 # adm42-nl, pc52, gs6300, xerox820, uts30.
21572 # * Pull SCO's padding into vi200 entry.
21573 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
21574 # entries merged in from SCO's descriptions.
21575 # * Fixed old-style prefix padding on zen50, h1500.
21576 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
21577 # entry from SCO's description.
21578 # * Reorganized the special entries.
21579 # * Added lm#0 to cbunix and virtual entries.
21581 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
21582 # * Restored cdc456tst.
21583 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
21584 # * Added megatek, beacon, microkit.
21585 # * Freeze for ncurses-1.9 release.
21586 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
21587 # * Added historical data for TAB.
21588 # * Comment fixes from David MacKenzie.
21589 # * Added the new BSDI pc3 entry.
21590 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
21591 # * A change in the tic -C logic now ensures that all entries in
21592 # the termcap translation will fit in < 1024 bytes.
21593 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
21594 # from GNU termcap file. This merges in all their local information.
21595 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
21596 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
21597 # * Added warnings about entries with long translations (restoring
21598 # all the GNU termcaps pushes a few over the edge).
21599 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
21600 # * Yet another tic change, and a couple of entry tweaks, to reduce the
21601 # number of long (> 1024) termcap translations back to 0.
21603 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
21604 # * Added kf13-kf20 to Linux entry.
21605 # * Regularize Prime terminal names.
21606 # * Historical data on Synertek.
21607 # * Freeze for ncurses-1.9.1.
21608 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
21609 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
21610 # * Eliminate whitespace in short name fields, this tanks some scripts.
21611 # * Name field changes to shorten some long entries.
21612 # * Termcap translation now automatically generates empty rmir/smir
21613 # when ich1/ich is present (copes with an ancient vi bug).
21614 # * Added `screen' entries from FSF's screen-3.6.2.
21615 # * Added linux-nic and xterm-nic entries.
21616 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
21617 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21618 # eliminating some special-case code in ncurses.
21620 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
21621 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
21622 # that captures everything unique from it.
21623 # * Added reorder script generator.
21624 # * Freeze for ncurses 1.9.2 release.
21625 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
21626 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
21627 # * Added Olaf Siebert's corrections for adm12.
21628 # * ansi-pc-color now includes the colors and pairs caps, so that
21629 # entries which use it will inherit them automatically.
21630 # * The linux entry can now recognize the center (keypad 5) key.
21631 # * Removed some junk that found its way into Linux acsc.
21633 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
21634 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
21635 # * xterm doesn't try to use application keypad mode any more.
21636 # * Freeze for ncurses-1.9.3 release.
21637 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
21638 # * Added corrected sun entry from vendor.
21639 # * Added csr capability to linux entry.
21640 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
21641 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
21642 # * Some commented-out caps in long entries come back in, my code
21643 # for computing string-table lengths had a bug in it.
21644 # * pcansi series modified to fit comm-program reality better.
21645 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
21646 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
21647 # * Correct some bad aliases in the pcansi series
21648 # * Added entry for QNX console.
21649 # * Clean up duplicate long names for use with 4.4 library.
21650 # * Change vt100 standout to be normal reverse vide, not bright reverse;
21651 # this makes the Emacs status line look better.
21652 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
21653 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
21654 # * Minor surgery, mostly on name strings, to shorten termcap version.
21656 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
21657 # * Added dec-vt100 for use with the EWAN emulator.
21658 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
21659 # * Freeze for 1.9.5 alpha release.
21660 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
21661 # * Changed xterm lines to 24, the X11R6 default.
21662 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
21663 # * Added 7 newly discovered, undocumented acsc characters to linux
21664 # entry (the pryz{|} characters).
21665 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
21666 # * Correct two typos in the xterm entries introduced in 9.9.1.
21667 # * I finally figured out how to translate ko capabilities. Done.
21668 # * Added tvi921 entries from Tim Theisen.
21669 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
21670 # * Removed mystery tec entry, it was neither interesting nor useful.
21671 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
21672 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
21673 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
21674 # by making them relative to use capabilities
21675 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
21676 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
21677 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
21679 # * Translate all home=\E[;H capabilities to home=\E[H, they're
21681 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
21682 # vt100 and ANSI-like terminals.
21683 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
21684 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
21685 # does this now, too.
21686 # * fviewpoint is gone, it duplicated screwpoint.
21687 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
21688 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
21689 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
21690 # The UW vi50 replaces the old one, which becomes vi50adm,
21691 # * No more embedded commas in name fields.
21693 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
21694 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
21695 # * Introduced klone+* entries for describing Intel-console behavior.
21696 # * Linux kbs is default-mapped to delete for some brain-dead reason.
21697 # * -nsl -> -ns. The -pp syntax is obsolete.
21698 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
21699 # * Make xterm entry do application-keypad mode again. I got complaints
21700 # that it was messing up someone's 3270 emulator.
21701 # * Added some longname fields in order to avoid warning messages from
21702 # older tic implementations.
21703 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
21704 # it! (This gives us pi, greater than, less than, and a few more.)
21705 # * Freeze for ncurses-1.9.6 release.
21706 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
21707 # * Add xon to a number of console entries, they're memory-mapped and
21708 # don't need padding.
21709 # * Correct the use dependencies in the ansi series.
21710 # * Hand-translate more XENIX capabilities.
21711 # * Added hpterm entry for HP's X terminal emulator.
21712 # * Added aixterm entries.
21713 # * Shortened four names so everything fits in 14 chars.
21715 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
21716 # * Added ibcs2 entry and info on iBCS2 standard.
21717 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
21718 # * We can handle the HP meml/memu capability now.
21719 # * Added smacs to klone entries, just as documentation.
21720 # * Carrected ansi.sys and cit-500 entries.
21721 # * Added z39, vt320-k311, v220c, and avatar entries.
21722 # * Make pcansi use the ansi.sys invis capability.
21723 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
21724 # tvi925, tvi950, dt80, ncr7900i, h19.
21725 # * X3.64 has been withdrawn, change some references.
21726 # * Removed function keys from ansi-m entry.
21727 # * Corrected ansi.sys entry.
21728 # * Freeze for ncurses-1.9.7 release.
21729 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
21730 # * Added rmam/smam capabilities to many entries based on init strings.
21731 # * Added correct hpa/vpa to linux.
21732 # * Reduced several entries relative to vt52.
21733 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
21734 # * Exiled some utterly unidentifiable custom and homebrew types to the
21735 # UFO file; also, obsolete small-screen hardware; also, entries which
21736 # look flat-out incorrect, garbled, or redundant. These include the
21737 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
21738 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
21739 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
21740 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
21741 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
21742 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
21743 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
21744 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
21745 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
21746 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
21747 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
21748 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
21749 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
21750 # * Corrected pcvt25h as suggested by Brian C. Grayson
21751 # <bgrayson@pine.ece.utexas.edu>.
21752 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
21753 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
21754 # * Added kent=\EOM to xterm entry.
21756 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
21757 # * Corrected gigi entry.
21758 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
21759 # bad hpa/vpa capabilities.
21760 # * Corrected flash strings to have a uniform delay of .2 sec. No
21761 # more speed-dependent NUL-padding!
21762 # * terminfo capabilities in comments bracketed with <>.
21763 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
21764 # * Replaced pcvt with the 3.31 pcvt entries.
21765 # * Freeze for 1.9.7a.
21766 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
21767 # * Added emu entry from the X11R6 contrib tape sources.
21769 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
21770 # * Improved iris-ansi and sun entries.
21771 # * More flash string improvements.
21772 # * Corrected wy160 & wy160 as suggested by Robert Dunn
21773 # * Added dim to at386.
21774 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
21775 # he's ready to start using the termcap generated from this one.
21776 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
21777 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
21778 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
21779 # att610, att620, att630,
21780 # * Changed hazeltine name prefix from h to hz.
21781 # * Sent t500 to the UFI file.
21782 # * I think we've sucked all the juice out of BSDI's termcap file now.
21783 # * Freeze for ncurses 1.9.8 release
21784 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
21785 # * Unfreeze, linux kbs needed to be fixed.
21786 # * Tim Theisen pinned down a bug in the DMD firmware.
21787 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
21788 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
21789 # (The broken ones had been shadowed by sgr.)
21790 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
21791 # * Added documentation on ECMA-48 standard.
21792 # * New Amiga entry.
21793 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
21794 # * More ECMA-48 stuff
21795 # * Corrected typo in minix entry, added pc-minix.
21796 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
21797 # * Added rxvt entry.
21798 # * Added 1.3.x color-change capabilities to linux entry.
21799 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
21800 # * Corrected rxvt entry khome/kend.
21801 # * Corrected linux color change capabilities.
21802 # * NeXT entries from Dave Wetzel.
21803 # * Cleaned up if and rf file names (all in /usr/share now).
21804 # * Changed linux op capability to avoid screwing up a background color
21805 # pair set by setterm.
21806 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
21807 # * Added xterm-sun.
21808 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
21811 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
21812 # * Another sweep through the Shuford archive looking for new info.
21813 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
21814 # * Added st52 from Per Persson.
21815 # * Added eterm from the GNU Emacs 19.30 distribution.
21816 # * Freeze for 1.9.9.
21817 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
21818 # * FreeBSD console entries from Andrew Chernov.
21819 # * Removed duplicate Atari st52 name.
21820 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
21821 # * xterm doesn't actually have ACS_BLOCK.
21822 # * Change klone+color setf/setb to simpler forms that can be
21823 # translated into termcap.
21825 # * Removed mechanically-generated junk capabilities from cons* entries.
21826 # * Added color support to bsdos.
21827 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
21828 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
21829 # * Created ecma+color, linux can use it. Also added ech to linux.
21830 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
21831 # * Add descriptions to FreeBSD console entries. Also shorten
21832 # some aliases to <= 14 chars for portability.
21833 # * Added x68k console
21834 # * Added OTbs to several VT-series entries.
21835 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
21836 # * screen entry update for 3.7.1 from Michael Alan Dorman.
21837 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
21838 # * kterm correction due to Kenji Rikitake.
21839 # * ACS correction in vt320-kll due to Phillippe De Muyter.
21840 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
21841 # * Sun console entry correction from J.T. Conklin.
21842 # * Changed all DEC VT300 and up terminals to use VT300 tab set
21843 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
21844 # * Added smul to linux entry (we never noticed it was missing
21845 # because of sgr!).
21846 # * Added rmln to hp+labels (deduced from other HP entries).
21847 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
21848 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
21849 # * Corrected vt220 acsc.
21850 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
21851 # this corresponds to reality and helps prevent some tic warnings.
21852 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
21853 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
21854 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
21855 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
21856 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
21857 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
21858 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
21859 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
21860 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
21861 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
21862 # ifmr, v3220, wy100q, tandem653, ibmaed.
21863 # * Added DWK terminal description.
21864 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
21865 # * Many entries now have highlights inherited from adm+sgr.
21866 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
21867 # * xtitle and xtitle-twm enable access to the X status line.
21868 # * Added linux-1.3.6 color palette caps in conventional format.
21869 # * Added adm1178 terminal.
21870 # * Move fos and apollo terminals to obsolete category.
21871 # * Aha! The BRL terminals file told us what the Iris extensions mean.
21872 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
21873 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
21875 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
21876 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
21877 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
21878 # * Corrected, from BRL termcap file: vi50.
21879 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
21880 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
21881 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
21882 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
21883 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
21884 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
21885 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
21886 # * Paired-attribute fixes to various terminals.
21887 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
21888 # * xterm entry corrections from Thomas Dickey.
21889 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
21890 # * Added t916 entry, translated from a termcap in SCO's support area.
21891 # * New qnx entry from Michael Hunter.
21892 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
21893 # * Added hpex2 from Ville Sulko.
21894 # * Fixed a bug that ran the qnx and pcvtXX together.
21895 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
21896 # * Added dtterm entry from Solaris CDE.
21897 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
21898 # * corrected pairs#8 typo in dtterm entry.
21900 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
21901 # * updated xterm entry to cover 3.1.2E's new features.
21902 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
21903 # * Added new minix entry
21904 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
21905 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
21906 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
21907 # * Added Prism entries and kt7ix.
21908 # * Caution notes about EWAN and tabset files.
21909 # * Changed /usr/lib/tabset -> /usr/share/tabset.
21910 # * Added acsc/rmacs/smacs to vt52.
21911 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
21912 # * Merged in Thomas Dickey's reorganization of the xterm entries;
21913 # added technical corrections to avoid warning messages.
21914 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
21915 # * Added rmso=\E[27m in Linux entry.
21916 # * Added koi8-r support for Linux console.
21917 # * Replace xterm entries with canonical ones from XFree86 3.2.
21918 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
21919 # * Added color_xterm from Jacob Mandelson
21920 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
21921 # * Back off the xterm entry to use r6 as a base.
21922 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
21923 # * Added dec-vt220 at Adrian Garside's request.
21925 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
21927 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
21928 # * Minor corrections to xterm entries.
21929 # * Replaced EWAN telnet entry.
21930 # * Dropped the reorder script generator. It was a fossil.
21931 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21932 # * Replaced minitel-2 entry.
21933 # * Added MGR, ansi-nt.
21934 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21935 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21936 # the 4.4BSD Lite2 file.
21938 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
21939 # * Use setaf/setab consistently with SVr4.
21940 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
21941 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
21942 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
21943 # * add xterm-16color, for XFree86 3.3
21944 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
21945 # * correct typo in emu
21946 # * correct typo in vt102-w (Robert Wuest)
21947 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
21948 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
21949 # * remove ech capability from rxvt (it does the wrong thing)
21950 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
21951 # * remove spurious newlines from several entries (hp+color, wy50,
21952 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
21954 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
21955 # * correct rmso capability of wy50-mc
21956 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
21957 # * add cbt to xterm-xf86-v32
21958 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
21959 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
21960 # other capabilities not in xterm-r6.
21961 # * remove alternate character set from kterm entry.
21962 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
21963 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
21964 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
21965 # * add xterm-8bit entry.
21966 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
21967 # * repair several places where early version of tic replaced \, with \\\,
21968 # * make acsc entries canonical form (sorted, uniq).
21969 # * modify acsc entries for linux, linux-koi8
21970 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
21971 # * add color, mouse support to kterm.
21972 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
21973 # * correct wy120 smxon/tbc capabilities which were stuck together.
21974 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
21975 # * add entry for xterm-xf86-v39t
21976 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
21977 # * add u8,u9 to sun-il description
21978 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
21979 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
21981 # * add hds200 description (Walter Skorski)
21982 # * add EMX 0.9b descriptions
21983 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
21984 # * rename xhpterm back to hpterm.
21985 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
21986 # * change initc in linux-c-nc to use 0..1000 range.
21987 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
21988 # * remove hpa/vpa from rxvt, which implements them incorrectly.
21989 # * add sgr0 for rxvt.
21990 # * remove bogus smacs/rmacs from EMX descriptions.
21991 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
21992 # * revised entry for att7300
21993 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
21994 # * use \0 rather than \200.
21995 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
21996 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
21997 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
21998 # * rename xterm-xf86-v39t to xterm-xf86-v40
21999 # * remove bold/underline from sun console entries since they're not
22001 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
22002 # * add beterm entry (Fred Fish)
22003 # * add irix-color/xwsh entry.
22004 # * turn ncv off for linux.
22005 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
22006 # * set ncv for FreeBSD console (treat colors with reverse specially).
22007 # * remove sgr string from qnx based on report by Xiaodan Tang
22008 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
22009 # * remove spurious commas from descriptions
22010 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
22011 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
22012 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22013 # apparently based on cp-866).
22015 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
22017 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22018 # * Replaced minitel-2 entry.
22019 # * Added MGR, ansi-nt.
22020 # * Minor corrections to xterm entries.
22021 # * Replaced EWAN telnet entry.
22022 # * Dropped the reorder script generator. It was a fossil.
22023 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22024 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22025 # the 4.4BSD Lite2 file.
22026 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
22027 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
22028 # * Updated iris-ansi; corrected vt102-w.
22029 # * Switch base xterm entry to 3.3 level.
22030 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
22032 # * Removed rmir/smir from tv92B.
22034 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
22035 # * add hds200 description (Walter Skorski)
22036 # * add beterm entry (Fred Fish)
22037 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
22038 # iris-color entries.
22039 # * add emx entries.
22040 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
22041 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
22043 # * remove sgr string from qnx based on report by Xiaodan Tang
22044 # * Added u8/u9, removed rmul/smul from sun-il.
22045 # * 4.2 tic displays \0 rather than \200.
22046 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22047 # apparently based on cp-866).
22048 # * Merged in Pavel Roskin's acsc for linux-koi8
22049 # * Corrected some erroneous \\'s to \.
22050 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
22051 # * II -> ii in pcvtXX, screen, xterm.
22052 # * Removed \n chars following ANSI escapes in sgr & friends.
22053 # * Updated Wyse entries.
22054 # * h19 corrections from Tim Pierce.
22055 # * Noted that the dm2500 has both ich and smir.
22056 # * added pccons for the Alpha under OSF/1.
22057 # * Added Sony NEWS workstation entries and cit101e-rv.
22058 # * Reverted `amiga'; to Kent Polk's version, as I'm told
22059 # the Verkuil entry messes up with Amiga Telnet.
22060 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
22061 # * Corrected attributions in 10.2.0 release notes.
22062 # * Scanned the Shuford archive for new terminfos and information.
22063 # * Removed sgr from qnx entry (Thomas Dickey).
22064 # * Added entries for ICL and Kokusai Data Systems terminals.
22065 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
22066 # * Incorporated att700 from the Boundless Technology FTP site.
22067 # * Miscellaneous contact-address and Web-page updates.
22069 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
22072 # * add nxterm and xterm-color terminfo description (request by Cristian
22073 # Gafton <gafton@redhat.com>).
22074 # * modify rxvt terminfo description to clear alternate screen before
22075 # switching back to normal screen, for compatibility with applications
22076 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
22077 # * modify linux terminfo description to reset color palette (reported
22078 # by Telford Tendys <telford@eng.uts.edu.au>).
22081 # * merge changes from current XFree86 xterm terminfo descriptions.
22084 # * Added minitel1 entries from Alexander Montaron.
22085 # * Added qnxt2 from Federico Bianchi.
22086 # * Added arm100 terminfo entries from Dave Millen.
22089 # * Added ncsa telnet entries from Francesco Potorti
22092 # * modify ncsa telnet entry to reflect color, other capabilities based on
22093 # examination of the source code - T.Dickey.
22096 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
22099 # * Added Francesco Potorti's tuned Wyse 99 entries.
22100 # * dtterm enacs correction from Alexander V. Lukyanov.
22101 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
22102 # * correct a typo in icl6404 entry.
22103 # * add xtermm and xtermc
22106 # * format most %'char' sequences to %{number}
22107 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
22108 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
22111 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
22112 # * correct initialization string in xterm-r5, add misc other features
22113 # to correspond with xterm patch 84 - TD
22116 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
22117 # * add Mathew Vernon's mach console entries
22118 # * corrections for ncsa function-keys (report by Larry Virden)
22121 # * change linux to use ncv#2, since underline does not work with color - TD
22124 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
22125 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
22126 # application modes, change kent to use the correct keypad code - TD
22129 # * add entry for Tera Term - TD
22132 # * minor improvements for teraterm entry - TD
22133 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
22134 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
22137 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
22138 # xterm and ncsa entries by removing the unneeded ones. Note that
22139 # some entries will return kend & khome versus kslt and kfnd, for
22140 # PC-style keyboards versus strict vt220 compatiblity - TD
22143 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
22145 # * add 'crt' entry - TD
22146 # * correct typos in 'linux-c' entry - TD
22149 # * update entries for BSD/OS console to use klone+sgr and klone+color
22150 # (Jeffrey C Honig)
22153 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
22156 # * add linux-lat, from RedHat patches to ncurses 4.2
22159 # * add complete set of default function-key definitions for scoansi - TD.
22162 # * add cnorm, cvvis for Linux 2.2 kernels
22165 # * add kmous to xterm-r5 -TD
22166 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
22167 # parent "use" clause -TD
22170 # * corrected cnorm, added el1 in 'screen' description -TD
22173 # * add ms-vt100 -TD
22176 # * corrections to beterm entry -TD
22179 # * add cygwin entry -TD
22182 # * minor corrections for beterm entry -TD
22185 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
22188 # * add amiga-8bit entry
22189 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
22190 # rcons-color, based on
22191 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
22192 # * add alias for iris-ansi-net
22195 # * corrected scoansi entry's acsc, some function keys, add color -TD
22198 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
22199 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
22200 # key mapping, leaving Potorti's entries more like he named them -TD
22201 # * remove enter/exit am-mode from cygwin -TD
22204 # * correct typos in several entries (missing '[' from CSI):
22205 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
22206 # strings for avt-ns -TD
22207 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
22210 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
22211 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
22212 # * add xterm-88color and xterm-256color -TD
22215 # * add "obsolete" termcap strings -TD
22216 # * add kvt and gnome entries -TD
22219 # * correct cup string for regent100 -TD
22222 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
22223 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
22224 # * change OTrs capabilities to rs2 -TD
22225 # * add obsolete and extended capabilities to 'screen' -TD
22228 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
22230 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
22231 # and adding kcbt -TD
22234 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
22235 # nonstandard resource settings -TD
22238 # * minor fixes for xterm-*, based on Debian #58530 -TD
22241 # * add several terminal types from esr's "11.0", as well as comments.
22242 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
22243 # vt220-8bit, vt220-old, wy85-8bit
22246 # * add several terminal types from esr's "11.0.1" (ansi-*).
22247 # * update OTxx capabilities for changes on 2000/3/4.
22248 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
22251 # * move screen's AX extension to ecma+color, modify several entries to
22252 # use that, adjusting ncv as needed -TD
22255 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
22256 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
22257 # in esr's version.
22260 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
22261 # * correct color definition for ibm3164, make minor changes to other
22262 # IBM terminal definitions based on recent terminfo descriptions -TD
22265 # * add mgterm, from NetBSD -TD
22266 # * add alias sun-cgsix for sun-ss5 as per NetBSD
22267 # * change cons25w to use rs2 for reset rather than rs1 -TD
22268 # * add rc/sc to aixterm based on manpage -TD
22271 # * remove ncv from xterm-16color, xterm-256color
22274 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22277 # * add Eterm (Michael Jennings)
22280 # * add amiga-vnc entry.
22283 # * correct description of Top Gun Telnet.
22284 # * add kterm-color
22287 # * add qansi* entries from QNX ftp site.
22290 # * add Matrix Orbital entries by Eric Z. Ayers).
22291 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
22295 # * add S0, E0 extensions to screen's entry -TD
22298 # * several corrections based on tic's new parameter-checking code -TD
22299 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
22300 # bracketing sequences that reset video attributes (\E8 would restore
22304 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
22307 # * improved scoansi, based on SCO man-page, and testing console,
22308 # scoterm with tack -TD
22311 # * modify kterm to use acsc via SCS controls.
22314 # * screen 3.9.8 allows xterm mouse controls to pass-through
22317 # * remove spurious "%|" from some xterm entries.
22320 # * modify 'screen' khome/kend to match screen 3.09.08
22321 # * add examples of 'screen' customization (screen.xterm-xfree86,
22322 # screen.xterm-r6, screen.teraterm) -TD
22325 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
22326 # * add "Apple_Terminal" entries -Benjamin Sittler
22327 # * remove time-delays from "Apple_Terminal" entries -TD
22328 # * make sgr entries time-delays consistent with individual caps -TD
22331 # * corrected/updated screen.xterm-xfree86
22334 # * ELKS descriptions, from Federico Bianchi
22335 # * add u6 (CSR) to Eterm (Michael Jennings).
22338 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
22339 # tic which handles names no longer than 14 characters. Add
22340 # corresponding descriptions for the Darwin PowerPC console named
22341 # "xnuppc" -Benjamin Sittler
22344 # * change kbs in mach entries to ^? (Marcus Brinkmann).
22347 # * add "putty" entry -TD
22348 # * updated "Apple_Terminal" entries -Benjamin Sittler
22351 # * add ms-vt100-color entry -TD
22352 # * add "konsole" entries -TD
22355 # * update gnome entry to Redhat 7.2 -TD
22358 # * add kf13-kf48 strings to cons25w -TD
22359 # * add pcvt25-color entry -TD
22360 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
22361 # * improve some features of scoansi entry based on SCO's version -TD
22362 # * add scoansi-new entry corresponding to OpenServer 5.0.6
22365 # * add kcbt to screen entry -TD
22368 # * add rxvt-16color, ibm+16color, mvterm entries -TD
22371 # * split out linux-basic entry, making linux-c inherit from that, and
22372 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
22373 # the history of this console type -TD
22374 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
22375 # r/g/b parameters of initc are in the range 0 to 1000 -TD
22378 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
22381 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
22382 # in the latter -TD
22385 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
22386 # * ncr260wy350pp has only 16 color pairs -TD
22387 # * add sun-type4 from NetBSD -TD
22388 # * update xterm-xfree86 to current (patch 170) -TD
22389 # * add screen-bce, screen-s entries -TD
22390 # * add xterm-1002, xterm-1003 entries -TD
22393 # * update homepage for Top Gun Telnet/SSH
22396 # * reduce duplication in emx entries, added emx-base -TD
22399 # * corrected acs for screen.teraterm -TD
22400 # * add tkterm entry -TD
22403 # * cygwin changes from Charles Wilson:
22404 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
22405 # primary instead of nxterm, to match XFree86's xterm.terminfo
22406 # usage and to prevent circular links.
22407 # (rxvt): add additional codes from rxvt.org.
22408 # (rxvt-color): new alias
22409 # (rxvt-xpm): new alias
22410 # (rxvt-cygwin): like rxvt, but with special acsc codes.
22411 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
22412 # with a "native" MSWin GUI. Each takes different acsc codes,
22413 # which are both different from the "normal" rxvt's acsc.
22414 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
22415 # (cygwinDBG): ditto.
22418 # * update gnome terminal entries -TD
22421 # * add entries for djgpp 2.03 and 2.04 -TD
22424 # * add alias for vtnt -TD
22425 # * update xterm-xfree86 for XFree86 4.4 -TD
22428 # * add linux-vt (Andrey V Lukyanov)
22431 # * add screen.linux -TD
22434 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
22437 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
22438 # * add vt100+ and vt-utf8 entries -TD
22439 # * add uwin entry -TD
22442 # * add sgr strings to several common entries lacking them, e.g.,
22443 # screen, to make the entries more portable -TD
22444 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
22445 # * similar fixups for cvvis/cnorm various entries -TD
22448 # * remove 'ncv' from xterm-256color (patch 188) -TD
22452 # * add xterm-xf86-v44 -TD
22453 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
22454 # on G1 being used via an ISO-2022 escape sequence (report by
22455 # Juliusz Chroboczek) -TD
22456 # * add 'hurd' entry -TD
22459 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
22461 # * align with xterm #192's use of xterm-new -TD
22462 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
22463 # * make xterm-new the default "xterm" -TD
22466 # * minor fixes for emu -TD
22468 # * add rmam/smam to linux (Trevor Van Bremen)
22469 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
22470 # * fixes for avatar0 -TD
22471 # * fixes for vp3a+ -TD
22474 # * add xterm-pc-fkeys -TD
22475 # * review/update gnome and gnome-rh90 entries (prompted by
22476 # Redhat Bugzilla #122815) -TD
22477 # * review/update konsole entries -TD
22478 # * add sgr, correct sgr0 for kterm and mlterm -TD
22479 # * correct tsl string in kterm -TD
22482 # * make ncsa-m rmacs/smacs consistent with sgr -TD
22483 # * add sgr, rc/sc and ech to syscons entries -TD
22484 # * add function-keys to decansi -TD
22485 # * add sgr to mterm-ansi -TD
22486 # * add sgr, civis, cnorm to emu -TD
22487 # * correct/simplify cup in addrinfo -TD
22488 # * corrections for gnome and konsole entries
22489 # (Redhat Bugzilla #122815) -Hans de Goede
22490 # * modify DEC entries (vt220, etc), to add sgr string, and to use
22491 # ISO-2022 strings for rmacs/smacs -TD
22494 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
22497 # * improved putty entry -Robert de Bath
22500 # * remove dch/dch1 from rxvt because they are implemented inconsistently
22501 # with the common usage of bce/ech -TD
22502 # * remove khome from vt220 (vt220's have no home key) -TD
22503 # * add rxvt+pcfkeys -TD
22506 # * modify several entries to ensure xterm mouse and cursor visibility
22507 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
22508 # Eterm, screen. (The xterm entries are left alone - old ones for
22509 # compatibility, and the new ones do not require this change) -TD
22512 # * add morphos entry -Pavel Fedin
22513 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
22514 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
22517 # * update wsvt25 entry -TD
22520 # * update pairs for xterm-88color and xterm-256color to reflect the
22521 # ncurses extended-color support -TD
22524 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
22525 # * add aixterm-16color to demonstrate 16-color capability -TD
22528 # * add media-copy to vt100 -TD
22529 # * corrected acsc string for vt52 -TD
22532 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
22534 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
22537 # * re-corrected acsc string for vt52 -TD
22540 # * corrected sun-il sgr string which referred to bold and underline -TD
22541 # * add sun-color entry -TD
22544 # * modify sgr0 in several entries to reset alternate-charset as in the
22546 # * modify sgr string of prism9 to better match the individual
22550 # * correct order of use= in rxvt-basic -TD
22553 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
22556 # * other minor fixes to cygwin based on tack -TD
22557 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
22560 # * add nsterm-16color entry -TD
22561 # * remove ncv flag from xterm-16color -TD
22562 # * remove setf/setb from xterm-256color to match xterm #209 -TD
22563 # * update mlterm entry to 2.9.2 -TD
22566 # * fixes to make nsterm-16color match report
22567 # by Christian Ebert -Alain Bench
22570 # * add xterm+256color building block -TD
22571 # * add gnome-256color, putty-256color, rxvt-256color -TD
22574 # * add hpterm-color -TD
22577 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
22578 # * add gnome-fc5 (prompted by GenToo #122566) -TD
22579 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
22580 # * improve xterm-256color by combining the ibm+16color setaf/setab
22581 # strings with SGR 48. The setf/setb strings also are cancelled here
22582 # rather than omitted so derived entries will cancel those also -Alain
22586 # * add some notes regarding copyright to terminfo.src -TD
22587 # * use rxvt+pcfkeys in Eterm -TD
22588 # * remove km and flash from gnome, Eterm and rxvt since they do not work
22589 # as one would expect (km sends ESC rather than setting the 8th bit
22591 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
22592 # * add konsole-solaris -TD
22595 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
22596 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
22597 # * modify xterm-24 to inherit from "xterm" -TD
22598 # * add xiterm entry -TD
22599 # * add putty-vt100 entry -TD
22600 # * corrected spelling of Michael A Dorman's name, prompted by
22601 # http://www.advogato.org/person/mdorman/diary.html -TD
22604 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
22605 # * update xterm+pcfkeys to match xterm #216 -TD
22608 # * make descriptions of xterm entries consistent with its terminfo -TD
22611 # * add xfce, mgt -TD
22614 # * correct acsc string in kterm -TD
22617 # * add kon entry -TD
22618 # * remove invis from linux and related entries, add klone+sgr8 for those
22619 # that implement the feature (or have not been shown to lack it) -TD
22622 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22623 # * minor improvements to rxvt+pcfkeys -TD
22626 # * fix a few typos in if/then/else expressions -TD
22629 # * add several GNU Screen variations with 16- and 256-colors, and
22630 # status line (Alain Bench).
22633 # * add Newbury Data entries (Jean-Charles Billaud).
22636 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
22639 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
22640 # * add konsole-256color entry -TD
22643 # * add 9term entry (request by Juhapekka Tolvanen) -TD
22646 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
22647 # * add shift-control- and control-modified keys for rxvt editing
22649 # * update mlterm entry to 2.9.3 -TD
22650 # * add mlterm+pcfkeys -TD
22653 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
22654 # xterm+pcc0, etc., to make the corresponding building blocks reflect
22655 # xterm's capabilities -TD
22656 # * add mrxvt entry -TD
22657 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
22660 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
22663 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
22664 # xterm starting with patch #216 -TD
22665 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
22666 # to match xterm #230 -TD
22667 # * extend xterm+pccX entries to match xterm #230 -TD
22668 # * add xterm+app, xterm+noapp, from xterm #230 -TD
22669 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
22672 # * add screen.rxvt -TD
22675 # * add screen+fkeys (prompted by Debian #478094) -TD
22678 # * add screen.mlterm -TD
22679 # * improve mlterm and mlterm+pcfkeys -TD
22682 # * add Eterm-256color, Eterm-88color -TD
22683 # * add rxvt-88color -TD
22686 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
22687 # original to teraterm2.3 -TD
22688 # * update "gnome" to 2.22.3 -TD
22689 # * update "konsole" to 1.6.6 -TD
22690 # * add "aterm" -TD
22691 # * add "linux2.6.26" -TD
22694 # * change several \E[2g (clear tab at current column) to \E[3g
22695 # (clear all tabs) to match definition for tbc capability -TD
22698 # * add eterm-color -TD
22701 # * add screen.Eterm -TD
22704 # * correct typo in pfkey of ansi.sys-old
22705 # (report by Kalle Olavi Niemitalo)
22706 # * move function- and cursor-keys from emx-base to ansi.sys, and create
22707 # a pfkey capability which handles F1-F48 -TD
22710 # * add vwmterm entry (Bryan Christ)
22713 # * change ncv and op capabilities in sun-color to match Sun's entry for
22714 # this (report by Laszlo Peter)
22715 # * improve interix smso by using reverse rather than bold (report by
22716 # Kristof Zelechovski).
22719 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
22720 # * add linux-16color (Benjamin Sittler)
22721 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
22722 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
22723 # * add ccc and initc capabilities to xterm-16color -TD
22726 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
22729 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
22732 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
22733 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
22736 # * add bterm (bogl 0.1.18) -TD
22737 # * minor fix to rxvt+pcfkeys -TD
22740 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
22743 # * add several screen-bce.XXX entries -TD
22746 # * modify screen-bce.XXX entries to exclude ech, since screen's color
22747 # model does not clear with color for that feature -TD
22750 # * rename atari and st52 to atari-old, st52-old, use newer entries from
22751 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
22754 # * add mlterm+256color entry -TD
22757 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
22758 # the alternate character set (patch by Nicholas Marriott)
22761 # * improve acsc for vt52 (Benjamin Sittler)
22762 # * modify nsterm entries for consistent sgr/sgr0 -TD
22763 # * modify xnuppc entries for consistent sgr/sgr0 -TD
22764 # * add invis to tek4115 sgr -TD
22767 # * reformat acsc strings to canonical format -TD
22770 # * add "XT" capability to entries for terminals that support both
22771 # xterm-style mouse- and title-controls, for "screen" which
22772 # special-cases TERM beginning with "xterm" or "rxvt" -TD
22775 # * fill in no-parameter forms of cursor-movement where a parameterized
22776 # form is available -TD
22777 # * fill in missing cursor controls where the form of the controls is
22779 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
22782 # * correct comparison used for setting 16-colors in linux-16color
22783 # entry (Novell #644831) -TD
22784 # * improve linux-16color entry, using "dim" for color-8 which makes it
22785 # gray rather than black like color-0 -TD
22788 # * make "vte" the principal entry defining "gnome", since GNOME terminal
22789 # is merely one of several terminals whose behavior is provided by this
22793 # * fix typo in rmso for tek4106 -Goran Weinholt
22796 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
22797 # * also suppress ncv in konsole-base -TD
22800 # * add U8 feature to denote entries for terminal emulators which do not
22801 # support VT100 SI/SO when processing UTF-8 encoding -TD
22802 # * add xterm-utf8 as a demo of the U8 feature -TD
22805 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
22808 # * update minix entry to minix 3.2 (Thomas Cort).
22811 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
22812 # * remove a backslash which continued comment, obscuring altos3
22813 # definition with OpenBSD toolset (Nicholas Marriott).
22816 # * add/use xterm+tmux chunk from xterm #271 -TD
22817 # * resync xterm-new entry from xterm #271 -TD
22818 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
22819 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
22820 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
22823 # * add kich1 to sun (Yuri Pankov)
22824 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
22827 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
22830 # * minor cleanup of X-terminal emulator section -TD
22831 # * add terminator entry -TD
22832 # * add simpleterm entry -TD
22835 # * add xterm+kbs fragment from xterm #272 -TD
22838 # * add pccon entries for OpenBSD console (Alexei Malinin)
22841 # * corrected old changelog comments -TD
22844 # * add putty-sco -TD
22847 # * add mach-gnu (Samuel Thibault)
22848 # * add mach-gnu-color, tweaks to mach-gnu -TD
22849 # * make sgr for sun-color agree with smso -TD
22850 # * make sgr for prism9 agree with other caps -TD
22851 # * make sgr for icl6404 agree with other caps -TD
22852 # * make sgr for ofcons agree with other caps -TD
22853 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
22854 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
22855 # * make sgr for avt-ns agree with other caps -TD
22858 # * make sgr for xterm-pcolor agree with other caps -TD
22859 # * make sgr for att5425 agree with other caps -TD
22860 # * make sgr for att630 agree with other caps -TD
22861 # * make sgr for linux entries agree with other caps -TD
22862 # * make sgr for tvi9065 agree with other caps -TD
22863 # * make sgr for ncr260vt200an agree with other caps -TD
22864 # * make sgr for ncr160vt100pp agree with other caps -TD
22865 # * make sgr for ncr260vt300an agree with other caps -TD
22866 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
22867 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
22870 # * correct order of use-clauses in st-256color -TD
22873 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
22876 # * document all of the user-defined capabilities in one place -TD
22877 # * add XT to some places to improve usefulness for other applications
22878 # than screen, which would like to pretend that xterm's title is
22879 # a status-line. -TD
22880 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
22881 # of ordering and overrides -TD
22884 # * add msgr to vt420, similar DEC vtXXX entries -TD
22885 # * add several missing vt420 capabilities from vt220 -TD
22886 # * factor out ansi+pp from several entries -TD
22887 # * change xterm+sl and xterm+sl-twm to include only the status-line
22888 # capabilities and not "use=xterm", making them more generally useful
22889 # as building-blocks -TD
22890 # * add dec+sl building block, as example -TD
22893 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
22894 # * add eslok flag to dec+sl -TD
22895 # * dec+sl applies to vt320 and up -TD
22896 # * drop wsl width from xterm+sl -TD
22897 # * reuse xterm+sl in putty and nsca-m -TD
22898 # * add ansi+tabs to vt520 -TD
22899 # * add ansi+enq to vt220-vt520 -TD
22902 # * remove p6 (bold) from opus3n1+ for consistency -TD
22903 # * remove acs stuff from env230 per clues in Ingres termcap -TD
22904 # * modify env230 sgr/sgr0 to match other capabilities -TD
22905 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
22906 # * make sgr for dku7202 agree with other caps -TD
22907 # * make sgr for ibmpc agree with other caps -TD
22908 # * make sgr for tek4107 agree with other caps -TD
22909 # * make sgr for ndr9500 agree with other caps -TD
22910 # * make sgr for sco-ansi agree with other caps -TD
22911 # * make sgr for d410 agree with other caps -TD
22912 # * make sgr for d210 agree with other caps -TD
22913 # * make sgr for d470c, d470c-7b agree with other caps -TD
22916 # * rewrite vt520 entry based on vt420 -TD
22917 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
22920 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
22921 # analysis by Martin Husemann).
22922 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
22923 # Onno van der Linden).
22924 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
22925 # * add kdch1, etc., to qvt108 -TD
22926 # * add dl1/il1 to some entries based on dl/il values -TD
22927 # * add dl to simpleterm -TD
22930 # * modify some older xterm entries to align with xterm source -TD
22931 # * separate "xterm-old" alias from "xterm-r6" -TD
22934 # * add E3 to xterm-basic and putty -TD
22937 # * add nsterm-256color, make this the default nsterm -TD
22938 # * remove bw from nsterm-bce, per testing with tack -TD
22940 ######## SHANTIH! SHANTIH! SHANTIH!