1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2021/07/25 00:09:06 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
37 # https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
38 # https://invisible-island.net/personal/copyrights.html#removing_notes
39 #------------------------------------------------------------------------------
44 # Eric S. Raymond (current maintainer)
45 # John Kunze, Berkeley
46 # Craig Leres, Berkeley
48 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
49 # address is no longer valid. The latest version can always be found at
50 # <http://www.tuxedo.org/terminfo>.
52 # PURPOSE OF THIS FILE:
54 # This file describes the capabilities of various character-cell terminals,
55 # as needed by software such as screen-oriented editors.
57 # Other terminfo and termcap files exist, supported by various OS vendors
58 # or as relics of various older versions of UNIX. This one is the longest
59 # and most comprehensive one in existence. It subsumes not only the entirety
60 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
61 # termcap file, but also large numbers of vendor-maintained termcap and
62 # terminfo entries more complete and carefully tested than those in historical
63 # termcap/terminfo versions.
65 # Pointers to related resources (including the ncurses distribution) may
66 # be found at <http://www.tuxedo.org/terminfo>.
68 # INTERNATIONALIZATION:
70 # This file uses only the US-ASCII character set (no ISO8859 characters).
72 # This file assumes a US-ASCII character set. If you need to fix this, start
73 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
74 # for your character set. \E(A and \E)A enables the British character set
75 # with the pound sign at position 2/3.
77 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
78 # C1 characters are considered the first-byte set of the Japanese encodings,
79 # so \E)0 should be avoided in <enacs> and initialization strings.
83 # The version you are looking at may be in any of three formats: master
84 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
85 # which by the format given in the header above.
87 # The master format is accepted and generated by the terminfo tools in the
88 # ncurses suite; it differs from stock (System V-compatible) terminfo only
89 # in that it admits a group of capabilities (prefixed `OT') equivalent to
90 # various obsolete termcap capabilities. You can, thus, convert from master
91 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
92 # you have ncurses `tic -I' is nicer (among other things, it automatically
93 # outputs entries in a canonical form).
95 # The termcap version is generated automatically from the master version
96 # using tic -C. This filtering leaves in the OT capabilities under their
97 # original termcap names. All translated entries fit within the 1023-byte
98 # string-table limit of archaic termcap libraries except where explicitly
99 # noted below. Note that the termcap translation assumes that your termcap
100 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
101 # capability. Older versions of GNU termcap, through 1.3, do not.
103 # For details on these formats, see terminfo(5) in the ncurses distribution,
104 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
105 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
106 # as of June 1995; they are encouraging everyone to migrate to ncurses.
108 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
109 # no entry in this file has embedded comments. This is so source translation
110 # to termcap only has to carry over leading comments. Also, no name field
111 # contains embedded whitespace (such whitespace confuses rdist).
113 # Further note: older versions of this file were often installed with an editor
114 # script (reorder) that moved the most common terminal types to the front of
115 # the file. This should no longer be necessary, as the file is now ordered
116 # roughly by type frequency with ANSI/VT100 and other common types up front.
118 # Some information has been merged in from terminfo files distributed by
119 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
120 # comes from vendors who maintain official terminfos for their hardware
121 # (notably DEC and Wyse).
123 # A detailed change history is included at the end of this file.
127 # Comments in this file begin with # - they cannot appear in the middle
128 # of a terminfo/termcap entry (this feature had to be sacrificed in order
129 # to allow standard terminfo and termcap syntax to be generated cleanly from
130 # the master format). Individual capabilities are commented out by
131 # placing a period between the colon and the capability name.
133 # The file is divided up into major sections (headed by lines beginning with
134 # the string "########") and minor sections (beginning with "####"); do
136 # grep "^####" <file> | more
138 # to see a listing of section headings. The intent of the divisions is
139 # (a) to make it easier to find things, and (b) to order the database so
140 # that important and frequently-encountered terminal types are near the
141 # front (so that you'll get reasonable search efficiency from a linear
142 # search of the termcap form even if you don't use reorder). Minor sections
143 # usually correspond to manufacturers or standard terminal classes.
144 # Parenthesized words following manufacturer names are type prefixes or
145 # product line names used by that manufacturers.
147 # HOW TO READ THE ENTRIES:
149 # The first name in an entry is the canonical name for the model or
150 # type, last entry is a verbose description. Others are mnemonic synonyms for
153 # Terminal names look like <manufacturer> <model> - <modes/options>
154 # The part to the left of the dash, if a dash is present, describes the
155 # particular hardware of the terminal. The part to the right may be used
156 # for flags indicating special ROMs, extra memory, particular terminal modes,
157 # or user preferences.
159 # All names should be in lower case, for consistency in typing.
161 # The following are conventionally used suffixes:
162 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
163 # -am Enable auto-margin.
164 # -m Monochrome. Suppress color support
165 # -mc Magic-cookie. Some terminals (notably older Wyses) can
166 # only support one attribute without magic-cookie lossage.
167 # Their base entry is usually paired with another that
168 # uses magic cookies to support multiple attributes.
169 # -nam No auto-margin - suppress <am> capability
170 # -nl No labels - suppress soft labels
171 # -ns No status line - suppress status line
172 # -rv Terminal in reverse video mode (black on white)
173 # -s Enable status line.
174 # -vb Use visible bell (<flash>) rather than <bel>.
175 # -w Wide - in 132 column mode.
176 # If a name has multiple suffixes and one is a line height, that one should
177 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
179 # Entries with embedded plus signs are designed to be included through use/tc
180 # capabilities, not used as standalone entries.
182 # To avoid search clashes, some older all-numeric names for terminals have
183 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
184 # All primary names of terminals now have alphanumeric prefixes.
186 # Comments marked "esr" are mostly results of applying the termcap-compiler
187 # code packaged with ncurses and contemplating the resulting error messages.
188 # In many cases, these indicated obvious fixes to syntax garbled by the
189 # composers. In a few cases, I was able to deduce corrected forms for garbled
190 # capabilities by looking at context. All the information in the original
191 # entries is preserved in the comments.
193 # In the comments, terminfo capability names are bracketed with <> (angle
194 # brackets). Termcap capability names are bracketed with :: (colons).
196 # INTERPRETATION OF USER CAPABILITIES
198 # The System V Release 4 and XPG4 terminfo format defines ten string
199 # capabilities for use by applications, <u0>...<u9>. In this file, we use
200 # certain of these capabilities to describe functions which are not covered
201 # by terminfo. The mapping is as follows:
203 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
204 # u8 terminal answerback description
205 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
206 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
208 # The terminal enquire string <u9> should elicit an answerback response
209 # from the terminal. Common values for <u9> will be ^E (on older ASCII
210 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
212 # The cursor position request (<u7>) string should elicit a cursor position
213 # report. A typical value (for VT100 terminals) is \E[6n.
215 # The terminal answerback description (u8) must consist of an expected
216 # answerback string. The string may contain the following scanf(3)-like
219 # %c Accept any character
220 # %[...] Accept any number of characters in the given set
222 # The cursor position report (<u6>) string must contain two scanf(3)-style
223 # %d format elements. The first of these must correspond to the Y coordinate
224 # and the second to the %d. If the string contains the sequence %i, it is
225 # taken as an instruction to decrement each value after reading it (this is
226 # the inverse sense from the cup string). The typical CPR value is
227 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
229 # These capabilities are used by tack(1m), the terminfo action checker
230 # (distributed with ncurses 5.0).
234 # All the entries in this file have been edited to assume that the tabset
235 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
236 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
237 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
239 # No curses package we know of actually uses these files. If their location
240 # is an issue, you will have to hand-patch the file locations before compiling
243 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
245 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
246 # character-cell terminals are increasingly replaced by X displays, much of
247 # this file is becoming a historical document (this is part of the reason for
248 # the new organization, which puts ANSI types, xterm, Unix consoles,
249 # and vt100 up front in confidence that this will catch 95% of new hardware).
251 # For the terminal types still alive, I'd like to have manufacturer's
252 # contact data (Internet address and/or snail-mail + phone).
254 # I'm also interested in enriching the comments so that the latter portions of
255 # the file do in fact become a potted history of VDT technology as seen by
256 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
257 # include its live/dead/out-of-the-business status, and for as many
258 # terminal types as possible to be tagged with information like years
259 # of heaviest use, popularity, and interesting features.
261 # I'm especially interested in identifying the obscure entries listed under
262 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
263 # wisdom about them gets lost. If you know a lot about obscure old terminals,
264 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
265 # eyeball it for things you can identify and describe.
267 # If you have been around long enough to contribute, please read the file
268 # with this in mind and send me your annotations.
270 # COPYRIGHTS AND OTHER DELUSIONS
272 # The BSD ancestor of this file had a standard Regents of the University of
273 # California copyright with dates from 1980 to 1993.
275 # Some information has been merged in from a terminfo file SCO distributes.
276 # It has an obnoxious boilerplate copyright which I'm ignoring because they
277 # took so much of the content from the ancestral BSD versions of this file
278 # and didn't attribute it, thereby violating the BSD Regents' copyright.
280 # Not that anyone should care. However many valid functions copyrights may
281 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
282 # contributors makes about as much sense as copyrighting a wall-full of
283 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
285 # This file deliberately has no copyright. It belongs to no one and everyone.
286 # If you claim you own it, you will merely succeed in looking like a fool.
287 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
288 # There are no guarantees anywhere. Svaha!
291 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
293 # This section describes terminal classes and brands that are still
299 # Special "terminals". These are used to label tty lines when you don't
300 # know what kind of terminal is on it. The characteristics of an unknown
301 # terminal are the lowest common denominator - they look about like a ti 700.
304 dumb|80-column dumb tty,
307 bel=^G, cr=\r, cud1=\n, ind=\n,
308 unknown|unknown terminal type,
310 lpr|printer|line printer,
313 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
314 glasstty|classic glass tty interpreting ASCII control characters,
317 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
318 kcud1=\n, nel=\r\n, .kbs=^H,
322 bel=^G, cr=\r, cud1=\n, ind=\n,
324 # This is almost the same as "dumb", but with no prespecified width.
325 # DEL and ^C are hardcoded to act as kill characters.
326 # ^D acts as a line break (just like newline).
329 # for compatibility with xterm -TD
330 9term|Plan9 terminal emulator for X,
332 OTnl=\n, bel=^G, cud1=\n,
334 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
336 # See the end-of-file comment for more on these.
339 # ANSI capabilities are broken up into pieces, so that a terminal
340 # implementing some ANSI subset can use many of them.
341 ansi+local1|ANSI normal-mode cursor-keys,
342 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
343 ansi+local|ANSI normal-mode parameterized cursor-keys,
344 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
345 cuu=\E[%p1%dA, use=ansi+local1,
346 ansi+tabs|ANSI tab-stops,
347 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
348 ansi+inittabs|ANSI initial tab-stops,
350 ansi+erase|ANSI clear screen/line,
351 clear=\E[H\E[J, ed=\E[J, el=\E[K,
352 ansi+rca|ANSI relative cursor-addressing,
353 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
354 ansi+cup|ANSI absolute cursor-addressing,
355 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
356 ansi+rep|ANSI repeat-character,
357 rep=%p1%c\E[%p2%{1}%-%db,
358 ansi+idl1|ANSI insert/delete one line,
360 ansi+idl|ANSI insert/delete lines,
361 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
362 ansi+idc1|ANSI insert/delete one character,
363 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
364 ansi+idc|ANSI insert/delete characters,
365 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
366 ansi+arrows|ANSI normal-mode cursor-keys,
367 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
369 ansi+sgr|ANSI graphic renditions,
370 blink=\E[5m, invis=\E[8m, rev=\E[7m,
371 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
373 ansi+sgrso|ANSI standout only,
374 rmso=\E[m, smso=\E[7m,
375 ansi+sgrul|ANSI underline only,
376 rmul=\E[m, smul=\E[4m,
377 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
379 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
381 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
382 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
384 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
386 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
388 # ECMA-48 does not specify scroll-regions, but most people consider it to be
389 # "ANSI" because it is widely-supported. See ecma+index for the standard form.
390 ansi+csr|ANSI scroll-region plus cursor save & restore,
391 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
393 # The normal (ANSI) flavor of "media copy" building block asserts that
394 # characters sent to the printer do not echo on the screen. DEC terminals
395 # can also be put into autoprinter mode, where each line is sent to the
396 # printer as you move off that line, e.g., by a carriage return.
397 ansi+pp|ANSI printer port,
399 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
400 dec+pp|DEC autoprinter mode,
401 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
403 # The IBM PC alternate character set. Plug this into any Intel console entry.
404 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
405 # ROM graphics for control characters such as the diamond, up- and down-arrow.
406 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
407 # will work with any Intel console, they all seem to have inherited \E[11m
408 # from the ANSI.SYS de-facto standard.
409 klone+acs|alternate character set for ansi.sys displays,
410 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
411 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
412 \301w\302x\263y\363z\362{\343|\330}\234~\376,
413 rmacs=\E[10m, smacs=\E[11m,
415 # Highlight controls corresponding to the ANSI.SYS standard. Most
416 # console drivers for Intel boxes obey these. Makes the same assumption
417 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
418 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
419 klone+sgr|attribute control for ansi.sys displays,
420 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
421 rmso=\E[m, rmul=\E[m,
422 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
424 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
427 # Most Intel boxes do not treat "invis" (invisible) text.
428 klone+sgr8|attribute control for ansi.sys displays,
430 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
431 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
434 # Highlight controls corresponding to the ANSI.SYS standard. *All*
435 # console drivers for Intel boxes obey these. Does not assume \E[11m will
436 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
437 # diamond and arrow characters under curses.
438 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
439 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
441 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
442 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
443 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
446 # KOI8-R (RFC1489) acs (alternate character set)
447 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
448 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
449 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
450 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
451 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
453 rmacs=\E[10m, smacs=\E[11m,
455 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
456 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
457 # but equivalent strings that don't rely on that coincidence:
458 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
459 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
460 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
461 # They match a subset of ECMA-48.
462 klone+color|color control for ansi.sys and ISO6429-compatible displays,
463 colors#8, ncv#3, pairs#64,
464 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
466 # This is better than klone+color, it doesn't assume white-on-black as the
467 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
468 ecma+color|color control for ECMA-48-compatible terminals,
470 colors#8, ncv#3, pairs#64,
471 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
473 ecma+italics|ECMA-48 italics,
474 ritm=\E[23m, sitm=\E[3m,
476 # Attribute control for ECMA-48-compatible terminals
477 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
478 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
480 ecma+strikeout|ECMA-48 strikeout/crossed-out,
481 rmxx=\E[29m, smxx=\E[9m,
483 # ECMA-48 does not include the VT100 indexing and scroll-margins. It has its
485 ecma+index|ECMA-48 scroll up/down,
486 indn=\E[%p1%dS, rin=\E[%p1%dT,
488 # For comparison, here are all the capabilities implied by the Intel
489 # Binary Compatibility Standard (level 2) that fit within terminfo.
490 # For more detail on this rather pathetic standard, see the comments
491 # near the end of this file.
492 ibcs2|Intel Binary Compatibility Standard prescriptions,
493 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
494 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
495 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
496 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
497 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
498 il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h,
499 tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index,
501 #### ANSI/ECMA-48 terminals and terminal emulators
503 # See near the end of this file for details on ANSI conformance.
504 # Don't mess with these entries! Lots of other entries depend on them!
506 # This section lists entries in a least-capable to most-capable order.
507 # if you're in doubt about what `ANSI' matches yours, try them in that
508 # order and back off from the first that breaks.
510 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
511 # and more than one page of memory. It uses local motions instead of
512 # direct cursor addressing, and makes almost no assumptions. It does
513 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
514 ansi-mr|mem rel cup ansi,
516 cols#80, lines#24, use=vanilla, use=ansi+erase,
519 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
520 # beware of screen size problems and memory relative cursor addressing.
521 ansi-mini|any ansi terminal with pessimistic assumptions,
523 cols#80, lines#24, use=vanilla, use=ansi+cup,
526 # ansi-mtabs adds relative addressing and minimal tab support
527 ansi-mtabs|any ansi terminal with pessimistic assumptions,
529 ht=^I, use=ansi-mini, use=ansi+local1,
531 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
533 # The following is an entry for the full ANSI 3.64 (1977). It lacks
534 # padding, but most terminals using the standard are "fast" enough
535 # not to require any -- even at 9600 bps. If you encounter problems,
536 # try including the padding specifications.
538 # Note: the :as: and :ae: specifications are not implemented here, for
539 # the available termcap documentation does not make clear WHICH alternate
540 # character set to specify. ANSI 3.64 seems to make allowances for several.
541 # Please make the appropriate adjustments to fit your needs -- that is
542 # if you will be using alternate character sets.
544 # There are very few terminals running the full ANSI 3.64 standard,
545 # so I could only test this entry on one verified terminal (Visual 102).
546 # I would appreciate the results on other terminals sent to me.
548 # Please report comments, changes, and problems to:
550 # U.S. MAIL: Hugh Hansard
553 # Atlanta, GA. 30322.
555 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
557 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
558 ansi77|ANSI 3.64 standard 1977 version,
560 cols#80, it#8, lines#24,
561 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
562 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
563 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
564 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
565 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
566 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
567 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
568 smso=\E[7m, smul=\E[4m,
570 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
571 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
572 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
573 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
574 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
575 # to confuse many emulators. On the other hand, we can count on these programs
576 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
577 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
578 # ANSI.SYS influence.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
580 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
582 cols#80, it#8, lines#24,
583 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
584 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
585 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
586 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
587 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
589 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
590 lines#25, use=pcansi-m,
591 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
592 lines#33, use=pcansi-m,
593 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
594 lines#43, use=pcansi-m,
595 # The color versions. All PC emulators do color...
596 pcansi|ibm-pc terminal programs claiming to be ansi,
597 use=klone+color, use=pcansi-m,
598 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
599 lines#25, use=pcansi,
600 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
601 lines#33, use=pcansi,
602 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
603 lines#43, use=pcansi,
605 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
606 # If you want pound signs rather than dollars, replace `B' with `A'
607 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
608 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
609 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
611 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
612 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
613 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
614 ich=\E[%p1%d@, il=\E[%p1%dL, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
615 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i,
616 mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db,
617 s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
618 vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,
620 ansi+enq|ncurses extension for ANSI ENQ,
621 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
624 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
625 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
626 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
627 ansi|ansi/pc-term compatible with color,
628 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
630 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
631 # all the normal ANSI stuff with no extensions. It assumes
632 # insert/delete line/char is there, so it won't work with
633 # vt100 clones. It assumes video attributes for bold, blink,
634 # underline, and reverse, which won't matter much if the terminal
635 # can't do some of those. Padding is assumed to be zero, which
636 # shouldn't hurt since xon/xoff is assumed.
637 ansi-generic|ansiterm|generic ansi standard terminal,
639 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
640 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
641 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
642 use=ansi+sgrbold, use=ansi+arrows,
644 #### DOS ANSI.SYS variants
646 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
647 # documentation (except for the keyboard key reassignment feature, which
648 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
649 # though undocumented. The <pfkey> capability is untested but should work for
650 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
651 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
652 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
653 OTbs, am, mir, msgr, xon,
655 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
656 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
657 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
658 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
659 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
660 u7=\E[6n, use=klone+color, use=klone+sgr8,
662 # Keypad: Home=\0G Up=\0H PrPag=\0I
663 # ka1,kh kcuu1 kpp,ka3
665 # Left=\0K 5=\0L Right=\0M
668 # End=\0O Down=\0P NxPag=\0Q
669 # kc1,kend kcud1 kc3,knp
674 # On keyboard with 12 function keys,
675 # shifted f-keys: F13-F24
676 # control f-keys: F25-F36
677 # alt f-keys: F37-F48
678 # The shift/control/alt keys do not modify each other, but alt overrides both,
679 # and control overrides shift.
681 # <pfkey> capability for F1-F48 -TD
682 ansi.sys|ANSI.SYS 3.1 and later versions,
683 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
684 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
685 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
686 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
687 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
688 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
689 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
690 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
691 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
692 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
693 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
694 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
695 pfkey=\E[0;%?%p1%{11}%<%t%':'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
696 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
697 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
701 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
702 # This should only be used when the terminal emulator cannot redefine the keys.
703 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
704 # definitions must be restored. If the terminal emulator is quit while in vi
705 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
706 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
707 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
708 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
709 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
710 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
711 # Consequently the End keypad key could not be set (it is relatively safe and
712 # actually useful because it sends ^@ O, which beeps and opens a line above).
713 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
714 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
715 \svi\s9-29-86\n\E[;75;8p,
716 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
717 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
718 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
719 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
722 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
723 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
724 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
725 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
728 # See ansi.sysk and nansi.sys above.
729 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
730 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
731 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
732 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
735 #### Atari ST terminals
737 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
739 tw52|tw52-color|Toswin window manager with color,
741 colors#16, pairs#0x100,
742 oc=\Eb?\Ec0, op=\Eb?\Ec0,
743 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
745 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
747 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
749 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
752 tw52-m|Toswin window manager monochrome,
755 bold=\Eya, dch1=\Ea, dim=\EyB,
756 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
757 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
758 smso=\EyQ, smul=\EyH, use=at-m,
759 tt52|Atari TT medium and high resolution,
760 lines#30, use=at-color,
761 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
763 colors#16, pairs#0x100,
764 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
765 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
766 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
767 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
768 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
770 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
771 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
772 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
773 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
775 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
776 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
777 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
778 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
780 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
781 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
782 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
783 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
786 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
788 cols#80, it#8, lines#24,
789 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
790 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
791 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
792 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
793 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
794 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
795 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
796 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
797 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
798 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
799 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
800 tw100|toswin vt100 window mgr,
802 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
803 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
805 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
806 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
807 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
808 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
809 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
810 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
811 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
812 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
813 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
814 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
815 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
816 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
817 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
818 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
819 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
820 rmso=\E[m, rmul=\E[m,
821 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
823 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
824 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
826 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
827 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
829 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
830 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
831 # The entries for stv52 and stv52pc probably need a revision.
832 stv52|MiNT virtual console,
834 cols#80, it#8, lines#30,
835 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
836 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
837 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
838 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
839 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
840 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
841 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
842 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
843 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
844 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
845 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
846 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
847 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
848 stv52pc|MiNT virtual console with PC charset,
850 cols#80, it#8, lines#30,
851 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
852 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
853 \363z\362{\343|\366}\234~\371,
854 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
855 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
856 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
857 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
858 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
859 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
860 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
861 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
862 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
863 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
864 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
865 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
868 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
871 cols#80, it#8, lines#25,
872 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
873 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
874 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
875 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
876 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
877 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
878 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
880 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220-base,
881 # MiNT VT52 emulation. 80 columns, 25 rows.
882 # MiNT is Now TOS, the operating system which comes with all Ataris now
883 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
884 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
885 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
886 st52-old|Atari ST with VT52 emulation,
889 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
890 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
891 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
892 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
893 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
894 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
895 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
896 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
897 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
902 # BeOS entry for Terminal program Seems to be almost ANSI
903 beterm|BeOS Terminal,
904 am, eo, mir, msgr, xenl, xon,
905 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
906 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
907 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
908 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
909 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
910 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
911 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
912 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
913 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
914 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
915 kf10=\E[20~, kf11=\E[21~, kf12=\E[22~, kf2=\E[12~,
916 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~,
917 kf8=\E[18~, kf9=\E[19~, kspd=^Z, nel=\r\n, op=\E[m, rc=\E8,
918 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?4l, rmso=\E[m,
919 rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm,
920 setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%cm,
921 setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smir=\E[4h,
922 smkx=\E[?4h, smso=\E[7m, smul=\E[4m,
923 u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, vpa=\E[%i%p1%dd,
929 # This entry is good for the 1.2.13 or later version of the Linux console.
931 # ***************************************************************************
934 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
935 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
936 # * character. Here are the keymap replacement lines that will set this up: *
938 # keycode 15 = Tab Tab
939 # alt keycode 15 = Meta_Tab
940 # shift keycode 15 = F26
941 # string F26 ="\033[Z"
943 # * This has to use a key slot which is unfortunate (any unused one will *
944 # * do, F26 is the higher-numbered one). The change ought to be built *
945 # * into the kernel tables. *
947 # ***************************************************************************
949 # All linux kernels since 1.2.13 (at least) set the screen size
950 # themselves; this entry assumes that capability.
952 linux-basic|linux console,
953 am, bce, eo, mir, msgr, xenl, xon,
955 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
956 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
957 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
958 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
959 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
960 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
961 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
962 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
963 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
964 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
965 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
966 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
967 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[[B,
968 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
969 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n,
970 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
971 rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
972 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
973 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
974 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
975 vpa=\E[%i%p1%dd, use=vt220+pcedit, use=vt102+enq,
976 use=klone+sgr, use=ecma+color, use=linux+sfkeys,
978 linux+decid|ncurses extension for Linux console DECID,
979 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
981 linux+sfkeys|shifted function-keys for Linux console,
982 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
983 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
985 linux-m|Linux console no color,
987 setab@, setaf@, setb@, setf@, use=linux,
989 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
990 # and it matters, turn off <ccc>. The %02x escape used to implement this is
991 # not supposedly back-portable to older SV curses (although it has worked fine
992 # on Solaris for several years) and not supported in ncurses versions before
994 linux-c-nc|linux console with color-change,
996 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
997 %02x%p4%{255}%*%{1000}%/%02x,
998 oc=\E]R, use=linux-basic,
999 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1000 linux-c|linux console 1.3.6+ for older ncurses,
1002 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1003 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1004 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1005 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1006 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1007 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1008 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1009 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1011 oc=\E]R, use=linux-basic,
1013 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1014 # get a block cursor for cvvis.
1015 # reported by Frank Heckenbach <frank@g-n-u.de>.
1016 linux2.2|linux 2.2.x console,
1017 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1018 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1020 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1021 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1022 # Although the kernel has mappings for these, they were not in the default
1023 # font (tested with Debian and Fedora):
1030 # The fix for SI/SO is part of a configurable (i.e., "optional") kernel feature
1031 # misleadingly called CONFIG_CONSOLE_TRANSLATIONS. Disabling that not only
1032 # omits the line-drawing using SI/SO, but also part/all of the Unicode feature:
1034 # https://cateee.net/lkddb/web-lkddb/CONSOLE_TRANSLATIONS.html
1035 # "This enables support for font mapping and Unicode translation on virtual consoles."
1037 # This mailing list thread in July 2008 illustrates:
1039 # https://marc.info/?t=121734656700005&r=1&w=4
1040 # "commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 break console on slackware 12.1"
1042 # The change which made it configurable was to reduce the size for use in
1043 # embedded systems. Some background is found in
1045 # https://lwn.net/Articles/284767/
1046 # "An interview with the new embedded maintainers"
1047 linux2.6|linux 2.6.x console,
1048 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1050 enacs=\E)0, rmacs=^O,
1051 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1052 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1053 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1055 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1056 # It is the same as xterm's erase-saved-lines feature.
1057 linux3.0|linux 3.0 kernels,
1058 E3=\E[3J, use=linux2.6,
1060 # This is Linux console for ncurses.
1061 linux|linux console,
1064 # Subject: linux 2.6.26 vt back_color_erase
1065 # Changes to the Linux console driver broke bce model as reported in
1066 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1068 # http://lkml.org/lkml/2008/4/26/305
1069 # http://lkml.org/lkml/2008/10/3/66
1070 linux2.6.26|linux console w/o bce,
1073 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1074 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1075 ich@, ich1@, use=linux,
1077 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1078 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1079 linux-koi8|linux with koi8 alternate character set,
1080 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1081 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1082 \211w\210x\201y\230z\231{\267|\274~\224,
1083 use=linux, use=klone+koi8acs,
1085 # Another entry for KOI8-r with Qing Long's acsc.
1086 # (which one better complies with the standard?)
1087 linux-koi8r|linux with koi8-r alternate character set,
1088 use=linux, use=klone+koi8acs,
1090 # Entry for the latin1 and latin2 fonts
1091 linux-lat|linux with latin1 or latin2 alternate character set,
1092 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1093 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1094 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1097 # This uses graphics from VT codeset instead of from cp437.
1098 # reason: cp437 (aka "straight to font") is not functional under luit.
1099 # from: Andrey V Lukyanov <land@long.yar.ru>.
1100 linux-vt|linux console using VT codes for graphics,
1101 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1103 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1106 # This is based on the Linux console (relies on the console to perform some
1107 # of the functionality), but does not recognize as many control sequences.
1108 # The program comes bundled with an old (circa 1998) copy of the Linux
1109 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1110 # \E* move cursor to home, as as \E[H
1112 # \EE move cursor to beginning of row
1113 # \E[y,xf same as \E[y,xH
1115 # Note: The status-line support is buggy (dsl does not work).
1116 kon|kon2|jfbterm|Kanji ON Linux console,
1118 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1119 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1123 # Another variant. There are two parts (src, src/lib) with the latter
1124 # comprising the escape-sequence parsing. The copyright notice on that
1125 # says it is based on GTerm by Timothy Miller.
1127 # The original developer "dragchan" has left, but as of March 2017 there is
1128 # (still dead) code from May 2015 here:
1129 # https://github.com/izmntuk/fbterm
1131 # The acsc string may be incorrect.
1133 # Not used here, the program recognizes escapes for italic, underline and
1134 # dim, rendering those as green, cyan and gray respectively.
1135 fbterm|FbTerm for Linux with framebuffer,
1136 colors#0x100, pairs#0x10000,
1137 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1138 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1139 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1140 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1141 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1142 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1143 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1144 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1146 # 16-color linux console entry; this works with a 256-character
1147 # console font but bright background colors turn into dim ones when
1148 # you use a 512-character console font. This uses bold for bright
1149 # foreground colors and blink for bright background colors.
1151 # Interestingly, the original version of this entry in 2009 used a documented
1152 # (but nonstandard) SGR 21, which was supported in the Linux console since 1992
1153 # as an equivalent for SGR 22. Long after (early 2018), someone modified the
1154 # console driver to make it ignore SGR 21 because the ECMA-48 standard
1155 # suggested a different use for that particular code:
1157 # https://github.com/torvalds/linux/commit/65d9982d7e523a1a8e7c9af012da0d166f72fc56#diff-7da3c215d12c9f6b88e1a37d38b116f0
1159 # Two years later, someone (unfamiliar with ECMA-48 this time) documented it:
1161 # https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man4/console_codes.4?id=a133a6bc03d751a424fe0a4adea2198757599615
1163 # For background, refer to the report on bug-ncurses:
1165 # https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html
1166 linux-16color|linux console with 16 colors,
1167 colors#16, ncv#42, pairs#0x100,
1168 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1169 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
1172 # bterm (bogl 0.1.18)
1173 # Implementation is in bogl-term.c
1174 # Key capabilities from linux terminfo entry
1177 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1178 # bterm does not support sgr, since it only processes one parameter -TD
1179 bterm|bogl virtual terminal,
1181 colors#8, cols#80, lines#24, pairs#64,
1182 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, clear=\E[H\E[2J,
1183 cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J,
1184 el=\E[K, home=\E[H, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1185 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
1186 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1187 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1188 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1189 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1190 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n,
1191 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1192 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1193 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1194 use=vt220+pcedit, use=vt220+cvis,
1199 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1202 cols#80, it#8, lines#25,
1203 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1204 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1205 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1206 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1207 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1208 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1209 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1210 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1211 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1212 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1213 smso=\E[7m, smul=\E[4m,
1214 mach-bold|Mach Console with bold instead of underline,
1215 rmul=\E[0m, smul=\E[1m, use=mach,
1216 mach-color|Mach Console with ANSI color,
1218 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1219 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1221 # From: Samuel Thibault
1222 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1223 # Files: i386/i386at/kd.c
1225 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1227 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1228 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1229 \263y\363z\362{\343|\330}\234~\376,
1230 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1231 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1232 invis=\E[8m, nel=\EE,
1233 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1234 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1235 use=ecma+index, use=mach,
1237 mach-gnu-color|Mach Console with ANSI color,
1239 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1240 setaf=\E[3%p1%dm, use=mach-gnu,
1242 # From: Marcus Brinkmann
1243 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/
1245 # Comments in the original are summarized here:
1247 # hurd uses 8-bit characters (km).
1249 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1251 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1252 # have the eat_newline_glitch. It doesn't support setting or removing tab
1255 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1256 # one byte instead three.
1258 # <ich1> is not included because hurd has insert mode.
1260 # hurd doesn't use ^J for scrolling, because this could put things into the
1261 # scrollback buffer.
1263 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1264 # This is a GNU extension.
1266 # The original has commented-out ncv, but is restored here.
1268 # Reading the source, RIS resets cnorm, but not xmous.
1269 hurd|The GNU Hurd console server,
1270 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1271 colors#8, it#8, ncv#18, pairs#64,
1272 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1274 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\Ec, cr=\r,
1275 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1276 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1277 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1278 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1279 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1280 el1=\E[1K, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, ht=^I,
1281 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1282 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
1283 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~,
1284 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1285 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1286 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1287 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1288 kich1=\E[2~, kmous=\E[M, kspd=^Z, nel=\r\n, op=\E[39;49m,
1289 rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m, rmir=\E[4l,
1290 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1291 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1292 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1293 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1294 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
1295 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
1296 use=vt220+pcedit, use=ecma+index, use=ecma+italics,
1303 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1304 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1305 # right corner without triggering a scroll. The ncurses terminfo library can
1306 # handle this case with the <ich1> capability, and prefers <am> for better
1307 # optimization. Bug: The <op> capability resets attributes.
1308 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1309 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1310 qnx|qnx4|qnx console,
1311 daisy, km, mir, msgr, xhpa, xt,
1312 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1313 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1314 \303u\264v\301w\302x\263,
1315 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1316 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
1317 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1318 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1319 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
1320 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1321 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1322 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1323 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1324 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1325 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1326 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1327 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1328 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1329 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1330 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1331 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1332 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1333 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1334 kext=\377\270, kf1=\377\201, kf10=\377\212,
1335 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1336 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1337 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1338 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1339 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1340 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1341 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1342 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1343 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1344 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1345 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1346 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1347 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1348 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1349 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1350 khlp=\377\350, khome=\377\240, khts=\377\342,
1351 kich1=\377\253, kil1=\377\273, kind=\377\261,
1352 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1353 knp=\377\252, knxt=\377\312, kopn=\377\357,
1354 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1355 kprv=\377\302, krdo=\377\336, kref=\377\354,
1356 kres=\377\360, krfr=\377\347, kri=\377\271,
1357 krmir=\377\313, krpl=\377\362, krst=\377\352,
1358 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1359 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1360 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1361 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1362 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1366 qnxt|qnxt4|QNX4 terminal,
1369 qnxm|QNX4 with mouse events,
1371 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1372 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1373 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1374 smicm=\E/>2h, use=qnx4,
1379 # Monochrome QNX4 terminal or console. Setting this terminal type will
1380 # allow an application running on a color console to behave as if it
1381 # were a monochrome terminal. Output will be through stdout instead of
1382 # console writes because the term routines will recognize that the
1383 # terminal name starts with 'qnxt'.
1385 qnxtmono|Monochrome QNX4 terminal or console,
1389 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1390 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1391 # (TD: derive from original qnx4 entry)
1392 qnxt2|qnx 2.15 serial terminal,
1394 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1395 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1397 # QNX ANSI terminal definition
1400 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1401 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1402 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
1403 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1404 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1405 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1406 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1407 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1408 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1409 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1410 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1411 ind=\E[S, invis=\E[9m,
1412 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1413 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1414 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1415 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1416 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1417 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1418 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1419 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1420 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1421 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1422 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1423 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1424 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1425 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1426 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1427 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1428 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1429 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1430 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1431 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1432 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1433 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1434 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1435 rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1436 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1437 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1438 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1440 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1442 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
1443 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1444 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1445 smul=\E[4m, tbc=\E[3g,
1446 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+rep,
1447 use=att610+cvis0, use=ecma+index,
1449 qansi|QNX ansi with console writes,
1450 daisy, xhpa, use=qansi-g,
1452 qansi-t|QNX ansi without console writes,
1455 qansi-m|QNX ansi with mouse,
1457 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1458 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1459 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1460 smicm=\E[>2h, use=qansi,
1462 qansi-w|QNX ansi for windows,
1467 # SCO console and SOS-Syscons console for 386bsd
1468 # (scoansi: had unknown capabilities
1469 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1470 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1471 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1472 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1473 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1474 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1475 # on the <smacs>=\E[12m -- esr)
1477 # klone+sgr-dumb is an error since the acsc does not match -TD
1479 # In this description based on SCO's keyboard(HW) manpage list of default
1480 # function key values:
1481 # F13-F24 are shifted F1-F12
1482 # F25-F36 are control F1-F12
1483 # F37-F48 are shift+control F1-F12
1485 # hpa/vpa work in the console, but not in scoterm:
1489 # SCO's terminfo uses
1492 # which do not work (console or scoterm).
1494 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1495 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1496 OTbs, am, bce, eo, xon,
1497 colors#8, cols#80, it#8, lines#25, pairs#64,
1498 acsc=+/\,.-\230.\2310[5566778899::;;<<==>>FFGGHHIIJJKKLLMMNN
1499 OOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3
1501 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1502 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1503 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1504 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1505 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1506 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1507 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1508 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1509 ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z,
1510 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
1511 kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
1512 kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1513 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1514 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1515 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1516 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1517 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1518 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1519 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1520 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1521 knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
1522 ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1523 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1524 sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
1525 smul=\E[4m, use=ecma+index,
1526 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1528 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1529 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1530 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1531 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
1532 %p7%t;8%;%?%p9%t;12%e;10%;m,
1533 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1534 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1535 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1536 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1537 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1539 # make this easy to change...
1540 scoansi|SCO Extended ANSI standard crt,
1545 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1546 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1547 # for the application keypad mode. We have added iris-ansi-ap rather than
1548 # change the original to keypad mode.
1550 # (iris-ansi: added rmam/smam based on init string -- esr)
1552 # This entry, and those derived from it, is used in xwsh (also known as
1553 # winterm). Some capabilities that do not fit into the terminfo model
1554 # include the shift- and control-functionkeys:
1556 # F1-F12 generate different codes when shift or control modifiers are used.
1560 # control-F1 \E[025q
1562 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1563 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1565 # The cursor keys also have different codes:
1566 # control-up \E[162q
1567 # control-down \E[165q
1568 # control-left \E[159q
1569 # control-right \E[168q
1572 # shift-down \E[164q
1573 # shift-left \E[158q
1574 # shift-right \E[167q
1576 # control-tab \[072q
1578 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1580 cols#80, it#8, lines#40,
1581 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1582 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
1583 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
1584 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1585 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1586 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1587 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1588 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1589 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1590 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1591 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
1592 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
1593 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
1594 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
1595 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
1596 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
1597 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
1598 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1599 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1601 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1602 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1603 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1605 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1606 # (T.Dickey 98/1/24)
1607 iris-color|xwsh|IRIX ANSI with color,
1609 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1610 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
1611 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1612 use=ecma+italics, use=vt100+enq, use=klone+color,
1615 #### OpenBSD consoles
1617 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1619 # The following terminal descriptions for the AMD/Intel PC console
1620 # were prepared based on information contained in the OpenBSD-4.9
1621 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1623 # Added bce based on testing with tack -TD
1624 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1625 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1627 # Notes from testing with vttest:
1628 # fails wrapping test
1630 # identifies as vt200 with selective erase, but does not implement DECSCA
1633 # ESC # 8 DEC Screen Alignment Test (DECALN).
1634 # CSI ? 5 h Reverse Video (DECSCNM).
1636 pccon+keys|OpenBSD PC keyboard keys,
1637 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1638 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
1639 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1640 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1641 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
1642 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
1643 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1644 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1646 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1647 acsc=+>\,<-\^.v0#`+a:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#
1649 bold=\E[1m, rev=\E[7m, rmso=\E[27m,
1650 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
1651 sgr0=\E[m, smso=\E[7m,
1652 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1653 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1654 bold=\E[1m, enacs=\E)0, rev=\E[7m, rmacs=\E(B, rmso=\E[27m,
1655 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
1657 sgr0=\E[m\E(B, smacs=\E(0, smso=\E[7m,
1658 # underline renders as color
1659 pccon+colors|ANSI colors for OpenBSD PC console,
1661 colors#8, ncv#2, pairs#64,
1662 op=\E[49;39m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1663 # OpenBSD uses wscons,
1664 # + which does not implement DECSCNM or anything comparable, so it does not
1666 # + it renders underline using color.
1667 pccon+base|base capabilities for OpenBSD PC console,
1668 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1669 cols#80, it#8, lines#24,
1670 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1671 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1672 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1673 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1674 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1675 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1676 il=\E[%p1%dL, il1=\E[L, ind=\ED, nel=\EE, rc=\E8, ri=\EM,
1677 rmam=\E[?7l, rmul=\E[24m, rs2=\Ec, sc=\E7, smam=\E[?7h,
1678 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
1679 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1680 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
1681 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1682 use=pccon0-m, use=pccon+colors,
1683 pccon-m|OpenBSD PC console without colors,
1684 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1685 use=ansi+enq, use=vt220+cvis,
1686 pccon|OpenBSD PC console,
1687 use=pccon-m, use=pccon+colors,
1689 #### NetBSD consoles
1691 # pcvt termcap database entries (corresponding to release 3.31)
1692 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1694 # (For the terminfo master file, I translated these into terminfo syntax.
1695 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1696 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1697 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1699 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1700 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1701 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1702 pcvtXX|pcvt vt200 emulator (DEC VT220),
1703 am, km, mir, msgr, xenl,
1705 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1707 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1708 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1709 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1710 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1711 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1712 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1713 il=\E[%p1%dL, il1=\E[L, ind=\ED,
1714 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
1715 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1716 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1717 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1718 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1719 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1720 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1721 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1722 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1723 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1724 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1725 use=ecma+index, use=vt220+cvis,
1727 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1728 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1729 # 50 lines entries; 80 columns
1730 pcvt25|dec vt220 emulation with 25 lines,
1732 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1733 pcvt28|dec vt220 emulation with 28 lines,
1735 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1736 pcvt35|dec vt220 emulation with 35 lines,
1738 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1739 pcvt40|dec vt220 emulation with 40 lines,
1741 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1742 pcvt43|dec vt220 emulation with 43 lines,
1744 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1745 pcvt50|dec vt220 emulation with 50 lines,
1747 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1749 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1750 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1751 # 50 lines entries; 132 columns
1752 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1754 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1755 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1757 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1758 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1760 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1761 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1763 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1764 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1766 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1767 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1769 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1771 # OpenBSD implements a color variation
1772 pcvt25-color|dec vt220 emulation with 25 lines and color,
1774 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1775 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1776 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1777 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1778 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1781 # Terminfo entries to enable the use of the ncurses library in colour on a
1782 # NetBSD-arm32 console (only tested on a RiscPC).
1783 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1784 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1785 # typo in invis - TD
1786 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1787 am, bce, msgr, xenl, xon,
1788 cols#80, it#8, lines#30,
1789 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1790 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1791 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1792 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1793 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1794 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1795 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1796 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
1797 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1798 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1799 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1800 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1801 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1802 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1803 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1805 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
1806 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1807 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1808 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1811 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1812 cols#132, lines#50, use=arm100,
1814 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1815 # manufactured by Sharp for the Japanese market.
1816 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1817 x68k|x68k-ite|NetBSD/x68k ITE,
1819 kclr=\E[9~, khlp=\E[28~, use=vt220-base,
1822 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1824 # (still unfinished, but good enough so far.)
1825 ofcons|DNARD OpenFirmware console,
1828 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
1829 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1830 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1831 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1832 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1833 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1834 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
1835 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1836 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1837 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1838 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
1839 rmso=\2330m, rmul=\2330m,
1840 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
1841 %;%?%p1%p3%|%t;7%;m,
1842 sgr0=\2330m, smso=\2337m, smul=\2334m,
1844 # NetBSD "wscons" emulator in vt220 mode.
1845 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1846 # The emulator renders underlined text in red. Colors are otherwise usable.
1848 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1849 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1850 # vt220 screens in vttest do not work with this emulator. For instance, it
1851 # identifies itself (primary DA response) as a vt220 with selective erase. But
1852 # the selective erase feature does not work. The secondary response is copied
1853 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1854 # the level of detail in a termcap, it is a passable emulator, since ECH does
1855 # work. Don't use it on a VMS system -TD
1856 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1858 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1859 is2=\E[r\E[25;1H, kdch1=\E[3~, kend=\E[8~, kf1=\E[11~,
1860 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
1861 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
1862 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1863 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1865 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1868 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
1870 # TERM is by default vt100 for the console, wsvt25 for other ttys.
1871 # Initial testing set TERM=xterm, based on comments by developers, found too
1872 # many differences to continue in that path. However, test-results may be
1873 # useful to people curious about compatibility with xterm.
1875 # Testing with tack:
1877 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
1878 # There is color-bleeding in the color-pairs screen.
1879 # Attributes do not work with color
1881 # Failed: kf1-kf4, kf13-kf48, khome, kend
1882 # (effectively xterm-r6 for function-keys)
1883 # None of the function or cursor key-modifiers are encoded.
1884 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
1886 # Testing with vttest:
1887 # -------------------
1888 # Identifies as vt220 with selective erase
1889 # (however, selective erase refers to DECSCA, SPA)
1890 # Does not implement vt52
1891 # Uses spaces to simulate double-size characters
1892 # Does not support 8-bit controls
1893 # Does not support VT220 reports
1894 # Does not support send/receive mode
1895 # Supports ECH (like rxvt)
1896 # Does not support DECSCA
1897 # Does not support any of the ISO-6429 cursor-movement
1898 # Does not support any of the ISO-6429 miscellaneous tests
1899 # (SL/SR also leave unexpected char on screen too)
1900 # Background does not change in menu 11.6.9 (SGR 22-27)
1901 # None of the xterm special features tests work
1902 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
1905 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1907 rcons|BSD rasterconsole,
1909 # Color version of above. Color currently only provided by NetBSD.
1910 rcons-color|BSD rasterconsole with ANSI color,
1913 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1915 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1916 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1917 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1918 # -- compare with cons25w
1919 mgterm|MGL/MGL2 MobileGear Graphic Library,
1920 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1921 colors#8, cols#80, it#8, lines#18, pairs#64,
1922 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1923 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1924 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1925 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1926 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1927 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1928 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1929 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1930 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1931 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1932 kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
1933 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1934 kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
1935 rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1936 setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
1937 vpa=\E[%i%p1%dd, use=ecma+index,
1939 #### FreeBSD console entries
1941 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1942 # Andrey Chernov maintains the FreeBSD termcap distributions.
1944 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1945 # or comment out the :cb: capability in the console entry.
1947 # Alexander Lukyanov reports:
1948 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1949 # Now el1 clears not only to the line beginning, but also a large chunk
1950 # of previous line. But there is another bug - ech does not work at all.
1954 # common entry without semigraphics
1955 # Bug: The <op> capability resets attributes.
1956 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1957 # instance el1 does if the cursor is moved to the right margin first. Removed
1958 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1960 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1961 # Note that this disables standout with color.
1963 # The emulator sends difference strings based on shift- and control-keys,
1965 # F13-F24 are shifted F1-F12
1966 # F25-F36 are control F1-F12
1967 # F37-F48 are shift+control F1-F12
1968 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1969 am, bce, bw, eo, msgr, npc,
1970 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1971 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1972 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1973 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1974 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1975 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1976 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1977 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1978 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1979 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1980 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1981 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
1982 kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
1983 kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
1984 kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
1985 kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
1986 kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
1987 kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
1988 kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
1989 kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
1990 khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
1991 op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
1992 rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
1994 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
1996 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
1997 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1998 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
1999 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2002 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2003 kbs=^?, kdch1=\E[3~, use=cons25,
2004 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2006 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2007 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2008 smul=\E[4m, use=cons25,
2009 cons30|ansi80x30|freebsd console (30-line ansi mode),
2010 lines#30, use=cons25,
2011 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2012 lines#30, use=cons25-m,
2013 cons43|ansi80x43|freebsd console (43-line ansi mode),
2014 lines#43, use=cons25,
2015 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2016 lines#43, use=cons25-m,
2017 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2018 lines#50, use=cons25,
2019 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2020 lines#50, use=cons25-m,
2021 cons60|ansi80x60|freebsd console (60-line ansi mode),
2022 lines#60, use=cons25,
2023 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2024 lines#60, use=cons25-m,
2025 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2026 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2027 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2030 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2032 op@, rmul=\E[m, setab@, setaf@,
2033 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2034 %t;30;1%;%?%p6%t;1%;m,
2035 smul=\E[4m, use=cons25r,
2036 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2037 lines#50, use=cons25r,
2038 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2039 lines#50, use=cons25r-m,
2040 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2041 lines#60, use=cons25r,
2042 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2043 lines#60, use=cons25r-m,
2044 # ISO 8859-1 FreeBSD console
2045 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2046 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2047 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2048 \226v\227w\230x\231y\232z\233~\237,
2050 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2052 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2053 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2054 smul=\E[4m, use=cons25l1,
2055 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2056 lines#50, use=cons25l1,
2057 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2058 lines#50, use=cons25l1-m,
2059 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2060 lines#60, use=cons25l1,
2061 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2062 lines#60, use=cons25l1-m,
2064 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2065 # which is intended to be xterm-compatible. See for example
2066 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2067 # in particular scterm-teken.c
2069 # For FreeBSD 9 and 10:
2070 # --------------------
2071 # The /etc/ttys entries for console and other ttys are all configured to set
2074 # Testing with tack:
2075 # There is no VT100 line-drawing (uses +'s and -'s)
2076 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2078 # Testing with vttest:
2079 # Menu 2 diamonds don't work, blink ditto, light background ditto
2080 # The terminal identifies itself as VT100 with AVO
2081 # There is no VT52 support
2082 # There is no doublesize character support
2083 # The terminal supports ECH (like rxvt)
2084 # The terminal does not support send/receive mode
2085 # The terminal supports all of the ISO-6429 cursor-movement
2086 # The terminal supports some of the ISO-6429 miscellaneous tests
2087 # (SL/SR also leave unexpected char on screen too)
2089 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2090 # the cells which happen to have ASCII control-character values:
2091 # - ^X arrow pointing up
2092 # . ^Y arrow pointing down
2096 # Those are removed from this entry's acsc string to avoid confusion.
2097 # The resulting description provides correct line-drawing and function-keys -TD
2098 teken|syscons with teken,
2100 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2101 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2102 cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kcub1=\E[D, kcud1=\E[B,
2103 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[F, kent=\r,
2104 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
2105 kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2106 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\E[2~, knp=\E[6~,
2107 kpp=\E[5~, rmir=\E[4l, smir=\E[4h, tbc=\E[3g,
2108 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
2109 vpa=\E[%i%p1%dd, use=vt220+cvis, use=cons25,
2111 #### 386BSD and BSD/OS Consoles
2114 # This was the original 386BSD console entry (I think).
2115 # Some places it's named oldpc3|oldibmpc3.
2116 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2117 origpc3|origibmpc3|IBM PC 386BSD Console,
2118 OTbs, am, bw, eo, xon,
2120 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2122 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2123 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2124 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2125 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2126 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2127 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2129 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2130 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2133 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2134 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2135 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2136 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2138 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2139 # Note, the emulator supports many of the additional console features
2140 # listed in the iBCS2 (e.g. character-set selection) though not all
2141 # are described here. This entry really ought to be upgraded.
2142 # Also note, the console will also work with fewer lines after doing
2143 # "stty rows NN", e.g. to use 24 lines.
2144 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2145 # Bug: The <op> capability resets attributes.
2146 bsdos-pc|IBM PC BSD/OS Console,
2147 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2148 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2149 use=bsdos-pc-nobold,
2151 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2152 use=klone+color, use=bsdos-pc-m,
2154 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2155 OTbs, am, eo, km, xon,
2156 cols#80, it#8, lines#25,
2157 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2158 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2159 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2160 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2161 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2162 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2163 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2164 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2165 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2168 # Old names for BSD/OS PC console used in releases before 4.1.
2169 pc3|BSD/OS on the PC Console,
2170 use=bsdos-pc-nobold,
2171 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2174 # BSD/OS on the SPARC
2175 bsdos-sparc|Sun SPARC BSD/OS Console,
2178 # BSD/OS on the PowerPC
2179 bsdos-ppc|PowerPC BSD/OS Console,
2184 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2186 # Actually (TD pointed this out at the time the acsc string was added):
2187 # vt52 shouldn't define full acsc since most of the cells don't match.
2188 # see vt100 manual page A-31. This is the list that does match:
2197 # The line-drawing happens to work in several terminal emulators, but should
2198 # not be used as a guide to the capabilities of the vt52. Note in particular
2199 # that vt52 does not support line-drawing characters (the scan-X values refer
2200 # to a crude plotting feature) -TD
2204 acsc=+h.k0affggolpnqprrss, home=\EH, kbs=^H, nel=\r\n,
2205 ri=\EI, rmacs=\EG, rmkx=\E>, smacs=\EF, smkx=\E=, u8=\E/[KL],
2208 # This is more likely the "vt52" that you would see in emulation, i.e., no
2209 # keypad, no graphics.
2210 vt52-basic|vt52 for emulators,
2211 cols#80, it#8, lines#24,
2212 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
2213 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
2214 home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2215 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI,
2217 #### DEC VT100 and compatibles
2219 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2220 # and micro consoles can be found in the `obsolete' section. More details on
2221 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2222 # found near the end of this file.
2224 # Except where noted, these entries are DEC's official terminfos.
2225 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2226 # Engineering for more information. Updated terminfos and termcaps
2227 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2229 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2230 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2231 # its name to Boundless Technologies; see http://www.boundless.com.
2234 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2235 # certainly includes what DEC called the `Level 1 editing extension' codes;
2236 # only the very oldest VT100s lacked these and there probably aren't any of
2237 # those left alive. To capture these, use one of the VT102 entries.
2239 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2240 # since the cursor is left in a different position while in the
2241 # weird state (concept at beginning of next line, vt100 at end
2242 # of this line) so all versions of vi before 3.7 don't handle
2243 # <xenl> right on vt100. The correct way to handle <xenl> is when
2244 # you output the char in column 80, immediately output CR LF
2245 # and then assume you are in column 1 of the next line. If <xenl>
2246 # is on, am should be on too.
2248 # I assume you have smooth scroll off or are at a slow enough baud
2249 # rate that it doesn't matter (1200? or less). Also this assumes
2250 # that you set auto-nl to "on", if you set it off use vt100-nam
2253 # The padding requirements listed here are guesses. It is strongly
2254 # recommended that xon/xoff be enabled, as this is assumed here.
2256 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2257 # tab settings are in non-volatile memory and don't need to be
2258 # reset upon login. Also setting the number of columns glitches
2259 # the screen annoyingly. You can type "reset" to get them set.
2261 # The VT100 series terminals have cursor ("arrows") keys which can operate
2262 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2263 # is the reset state, and is assumed to be the normal state. Application
2264 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2265 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2266 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2267 # was provided primarily as an aid to the porting of VT52 applications. It is
2268 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2269 # applications such as vi will always transmit the <smkx> string. Therefore,
2270 # the definitions for the cursor keys are made to match what the terminal
2271 # transmits after the <smkx> string is transmitted. If the <smkx> string
2272 # is a null string or is not defined, then cursor keys are assumed to be in
2273 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2274 # else the application may fail. It is also expected that applications will
2275 # always transmit the <rmkx> string to the terminal before they exit.
2277 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2278 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2279 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2280 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2281 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2282 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2283 # Enter key transmits the same as the Return key (Note: the Return key
2284 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2285 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2286 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2287 # is normally in Numeric Mode. If an application requires that the keypad be
2288 # in Application Mode then it is expected that the user, or the application,
2289 # will set the TERM environment variable to point to a terminfo entry which has
2290 # defined the <smkx> string to include the codes that switch the keypad into
2291 # Application Mode, and the terminfo entry will also define function key
2292 # fields to match the Application Mode control codes. If the <smkx> string
2293 # is a null string or is not defined, then the keypad is assumed to be in
2294 # Numeric Mode. If the <smkx> string switches the keypad into Application
2295 # Mode, it is expected that the <rmkx> string will contain the control codes
2296 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2297 # applications which transmit the <smkx> string will also always transmit the
2298 # <rmkx> string to the terminal before they exit.
2300 # Here's a diagram of the VT100 keypad keys with their bindings.
2301 # The top line is the name of the key (some DEC keyboards have the keys
2302 # labelled somewhat differently, like GOLD instead of PF1, but this is
2303 # the most "official" name). The second line is the escape sequence it
2304 # generates in Application Keypad mode (where "$" means the ESC
2305 # character). The third line contains two items, first the mapping of
2306 # the key in terminfo, and then in termcap.
2307 # _______________________________________
2308 # | PF1 | PF2 | PF3 | PF4 |
2309 # | $OP | $OQ | $OR | $OS |
2310 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2312 # | $Ow | $Ox | $Oy | $Om |
2313 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2315 # | $Ot | $Ou | $Ov | $Ol |
2316 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2318 # | $Oq | $Or | $Os | enter |
2319 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2322 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2324 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2325 # terminfo guidelines. That is a compromise used to assign the remaining
2326 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2328 vt100+keypad|dec vt100 numeric keypad no fkeys,
2329 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2330 vt100+pfkeys|dec vt100 numeric keypad,
2331 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2333 vt100+fnkeys|dec vt100 numeric keypad,
2334 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2335 kf9=\EOw, use=vt100+pfkeys,
2337 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2338 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2339 # use the 5-key arrangement to model the arrow keys as suggested in the
2340 # terminfo guidelines:
2341 # _______________________________________
2342 # | PF1 | PF2 | PF3 | PF4 |
2343 # | $OP | $OQ | $OR | $OS |
2344 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2346 # | $Ow | $Ox | $Oy | $Om |
2347 # |_ka1__K1_|_________|_ka3__K3_|_________|
2349 # | $Ot | $Ou | $Ov | $Ol |
2350 # |_________|_kb2__K2_|_________|_________|
2352 # | $Oq | $Or | $Os | enter |
2353 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2356 # |___________________|_________|_kent_@8_|
2358 vt220+keypad|dec vt220 numeric keypad,
2359 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2360 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2363 vt100+enq|ncurses extension for vt100-style ENQ,
2364 u8=\E[?1;2c, use=ansi+enq,
2365 vt102+enq|ncurses extension for vt102-style ENQ,
2366 u8=\E[?6c, use=ansi+enq,
2368 # And here, for those of you with orphaned VT100s lacking documentation, is
2369 # a description of the soft switches invoked when you do `Set Up'.
2371 # Scroll 0-Jump Shifted 3 0-#
2372 # | 1-Smooth | 1-British pound sign
2373 # | Autorepeat 0-Off | Wrap Around 0-Off
2375 # | | Screen 0-Dark Bkg | | New Line 0-Off
2376 # | | | 1-Light Bkg | | | 1-On
2377 # | | | Cursor 0-Underline | | | Interlace 0-Off
2378 # | | | | 1-Block | | | | 1-On
2380 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2382 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2383 # | | | 1-On | | | 1-50 Hz
2384 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2385 # | | 1-ANSI | | 1-8 Bits
2386 # | Keyclick 0-Off | Parity 0-Off
2388 # Margin Bell 0-Off Parity Sense 0-Odd
2391 # The following SET-UP modes are assumed for normal operation:
2392 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2393 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2394 # Other SET-UP modes may be set for operator convenience or communication
2395 # requirements; I recommend
2396 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2397 # Unless you have a graphics add-on such as Digital Engineering's VT640
2398 # (and even then, whenever it can be arranged!) you should set
2401 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2402 vt100|vt100-am|dec vt100 (w/advanced video),
2403 OTbs, mc5i, xenl, xon,
2405 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
2406 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2407 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
2408 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
2410 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2411 %;m%?%p9%t\016%e\017%;$<2>,
2412 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
2413 use=vt100+4bsd, use=vt100+fnkeys,
2414 vt100+4bsd|dec vt100 from 4.0BSD,
2416 cols#80, it#8, lines#24,
2417 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2418 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2419 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
2420 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2421 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2422 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2423 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
2424 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2425 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
2426 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2427 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2428 %;m%?%p9%t\016%e\017%;$<2>,
2429 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
2430 smul=\E[4m$<2>, tbc=\E[3g,
2431 vt100nam|vt100-nam|vt100 no automargins,
2433 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
2434 vt100-vb|dec vt100 (w/advanced video) & no beep,
2435 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
2437 # Ordinary vt100 in 132 column ("wide") mode.
2438 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2440 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2441 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2442 cols#132, lines#14, vt@,
2443 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2445 # vt100 with no advanced video.
2446 vt100-nav|vt100 without advanced video option,
2448 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2450 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2451 cols#132, lines#14, use=vt100-nav,
2453 # vt100 with one of the 24 lines used as a status line.
2454 # We put the status line on the top.
2455 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2458 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2459 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2460 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2461 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2463 # Status line at bottom.
2464 # Clearing the screen will clobber status line.
2465 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2468 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2469 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2471 # Most of the `vt100' emulators out there actually emulate a vt102
2472 # This entry (or vt102-nsgr) is probably the right thing to use for
2475 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2477 vt102-w|dec vt102 in wide mode,
2479 rs3=\E[?3h, use=vt102,
2481 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2482 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2483 # string in the canonical vt100 entry above leaves the screen littered
2484 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2485 # after highlight turnoffs. This entry should fix that, and even leave
2486 # ACS support working, at the cost of making multiple-highlight changes
2487 # slightly more expensive.
2488 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2489 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2490 sgr@, sgr0=\E[m, use=vt102,
2492 # VT125 Graphics CRT. Clear screen also erases graphics
2493 # Some vt125's came configured with vt102 support.
2494 vt125|vt125 graphics terminal,
2496 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2498 # This isn't a DEC entry, it came from University of Wisconsin.
2499 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2502 cols#80, it#8, lines#24, vt#3,
2503 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2504 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2505 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
2506 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2507 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2508 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2509 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2510 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2511 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2513 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2514 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2515 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2517 # vt132 - like vt100 but slower and has ins/del line and such.
2518 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2519 # manual and from the ANSI standard, this describes the actual
2520 # terminal. I've never actually used a vt132 myself, so this
2525 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2526 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2528 # This vt220 description maps F5--F9 to the second block of function keys
2529 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2530 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2531 # PF1--PF4 are used as F1--F4.
2534 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2535 OTbs, OTpt, am, mir, msgr, xenl, xon,
2536 cols#80, lines#24, vt#3,
2538 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2539 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2540 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2541 cub1=^H, cud1=\E[B, cuf1=\E[C,
2542 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2543 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2544 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2545 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2546 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
2547 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
2548 kf8=\E[20~, kf9=\E[21~, kich1=\E[2~, rc=\E8, rev=\E[7m$<2>,
2549 rf=/usr/share/tabset/vt100, ri=\EM$<14/>,
2550 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2551 rmul=\E[24m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2553 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2554 %p9%t\E(0%e\E(B%;$<2>,
2555 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2556 smso=\E[7m, smul=\E[4m, use=vt220+pcedit, use=vt220+cvis,
2558 # Here's a picture of the Sun/PC editing keypad:
2559 # +--------+--------+--------+
2560 # | Insert | Home | PageUp |
2561 # +--------+--------+--------+
2562 # | Delete | End | PageDn |
2563 # +--------+--------+--------+
2565 # VT220 emulators such as xterm, using PC-keyboards use a different layout than
2566 # the VT220 keyboard:
2575 vt220+pcedit|editing-keypad for vt220 using PC keyboard,
2576 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
2577 knp=\E[6~, kpp=\E[5~,
2578 vt220+vtedit|editing-keypad for vt220 using DEC keyboard,
2579 kdch1=\E[3~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2582 # A much better description of the VT200/220; used to be vt220-8
2583 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2584 # designation to accommodate bug in pcvt -TD
2586 # Here's a picture of the VT220 editing keypad:
2587 # +--------+--------+--------+
2588 # | Find | Insert | Remove |
2589 # +--------+--------+--------+
2590 # | Select | Prev | Next |
2591 # +--------+--------+--------+
2593 # Still, this is a "base" entry. Software emulators commonly leave out the
2594 # DECTCEM feature -TD
2595 vt220-base|DEC VT220 as emulated,
2596 OTbs, am, mir, msgr, xenl, xon,
2597 cols#80, it#8, lines#24, vt#3,
2598 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2599 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2600 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2601 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2602 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2603 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2604 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2605 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2606 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2607 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2608 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
2609 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2610 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2611 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2612 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2613 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~,
2614 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE,
2615 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l,
2616 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2617 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2618 %p9%t\E(0%e\E(B%;$<2>,
2619 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2620 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit,
2621 use=ansi+pp, use=ansi+enq,
2622 vt220|vt200|dec vt220,
2623 use=vt220+cvis, use=vt220-base,
2624 vt220-w|vt200-w|DEC vt220 in wide mode,
2626 rs3=\E[?3h, use=vt220,
2627 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2628 OTbs, am, mc5i, mir, msgr, xenl, xon,
2629 cols#80, it#8, lines#24, vt#3,
2630 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2631 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
2632 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2633 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
2634 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2635 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2636 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2637 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2638 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2639 il=\233%p1%dL, il1=\233L, ind=\ED,
2640 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
2641 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2642 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2643 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2644 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2645 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2646 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2647 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2648 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2649 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2650 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2651 rmul=\23324m, rs1=\233?3l, sc=\E7,
2652 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
2653 %?%p9%t\E(0%e\E(B%;$<2>,
2654 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2655 smso=\2337m, smul=\2334m, tbc=\2333g, use=vt220+cvis8,
2658 # This vt220 description regards F6--F10 as the second block of function keys
2659 # at the top of the keyboard. This mapping follows the description given
2660 # in the VT220 Programmer Reference Manual and agrees with the labeling
2661 # on some terminals that emulate the vt220. There is no support for an F5.
2662 # See vt220 for an alternate mapping.
2664 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2665 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2666 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2667 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2668 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2670 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2672 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2674 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2675 # (not an official DEC entry!)
2676 # The problem with real vt220 terminals is they don't send escapes when in
2677 # in vt220 mode. This can be gotten around two ways. 1> don't send
2678 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2679 # features of vt100 advanced video which it then has.
2681 # This entry takes the view of putting a vt220 into vt100 mode so
2682 # you can use the escape key in emacs and everything else which needs it.
2684 # You probably don't want to use this on a VMS machine since VMS will think
2685 # it has a vt220 and will get fouled up coming out of emacs
2687 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2688 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2690 vt200-js|vt220-js|dec vt200 series with jump scroll,
2693 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2694 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2695 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2696 ht=^I, il1=\E[L, ind=\ED,
2697 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
2699 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2700 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
2701 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2702 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2703 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2704 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2707 # This was DEC's vt320. Use the purpose-built one below instead
2708 #vt320|DEC VT320 in vt100 emulation mode,
2711 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2713 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2715 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h,
2718 # These entries are not DEC's official ones, they were purpose-built for the
2719 # VT320. Here are the designer's notes:
2720 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2721 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2722 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2723 # Things that use <knxt> usually use tab anyways... and things that don't use
2724 # tab usually use <knxt> instead...
2725 # kprv is same as tab - Backtab is useless...
2726 # I left out <sgr> because of its RIDICULOUS complexity,
2727 # and the resulting fact that it causes the termcap translation of the entry
2728 # to SMASH the 1k-barrier...
2729 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2730 # (vt320: uncommented <fsl> --esr)
2731 vt320|vt300|dec vt320 7 bit terminal,
2732 am, hs, mir, msgr, xenl,
2733 cols#80, lines#24, wsl#80,
2734 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2735 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
2736 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2737 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2738 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2739 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2740 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2741 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2742 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2743 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2744 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2745 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2746 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2747 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2748 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2749 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2750 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2751 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2753 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2755 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2756 %p9%t\E(0%e\E(B%;$<2>,
2757 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2758 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2759 use=dec+pp, use=vt220+cvis, use=vt220+keypad, use=dec+sl,
2761 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2763 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2764 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
2765 # We have to init 132-col mode, not 80-col mode.
2766 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2768 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2769 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
2770 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2772 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2773 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
2775 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2776 # which are pretty much a superset of the VT320. They have the
2777 # host writable status line, yet another different DRCS matrix size,
2778 # and such, but they add the DEC Technical character set, Multiple text
2779 # pages, selectable length pages, and the like. The difference between
2780 # the vt330 and vt340 is that the former has only 2 planes and a monochrome
2781 # monitor, the latter has 4 planes and a color monitor. These terminals
2782 # support VT131 and ANSI block mode, but as with much of these things,
2783 # termcap/terminfo doesn't deal with these features.
2785 # Note that this entry is are set up in what was the standard way for GNU
2786 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2787 # keys were switched into application mode at the same time the numeric pad
2788 # is switched into application mode. This changes the definitions of the
2789 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2790 # your termcap or terminfo entry,
2792 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2793 # (vt340: string capability "sb=\E[M" corrected to "sr";
2794 # also, added <rmam>/<smam> based on the init string -- esr)
2795 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2796 am, eslok, hs, mir, msgr, xenl, xon,
2797 cols#80, it#8, lines#24, vt#3,
2798 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2799 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2800 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2801 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2802 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2803 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2804 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
2805 flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
2806 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2807 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2809 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2810 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2811 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2812 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2813 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2814 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2815 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2816 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2817 %p9%t\E(0%e\E(B%;$<2>,
2818 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2819 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2820 tsl=\E[2$~\E[1$}\E[1;%dH, use=vt220+cvis,
2822 # Left/right margins are supported in xterm since patch #279 (2012/05/10)
2823 vt420+lrmm|VT420 left/right margins,
2824 mgc=\E[?69l, smglr=\E[?69h\E[%i%p1%d;%p2%ds,
2826 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2827 # (originally written with vt420 as its primary name, and usable for it).
2829 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2830 # text pages and long text pages with selectable length of the vt340, along
2831 # with left and right margins, rectangular area text copy, fill, and erase
2832 # operations, selected region character attribute change operations,
2833 # page memory and rectangle checksums, insert/delete column, reception
2834 # macros, and other features too numerous to remember right now. TERMCAP
2835 # can only take advantage of a few of these added features.
2837 # Note that this entry is set up in what was the standard way for GNU
2838 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2839 # keys were switched into application mode at the same time the numeric pad
2840 # is switched into application mode. This changes the definitions of the
2841 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2842 # your termcap entry,
2844 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2845 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2846 # also, added <rmam>/<smam> based on the init string -- esr)
2847 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2848 am, eslok, hs, mir, msgr, xenl, xon,
2849 cols#80, it#8, lines#24, vt#3,
2850 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2851 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J$<10/>, cr=\r,
2852 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2853 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2854 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2855 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2856 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2857 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2858 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2859 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2860 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2862 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2863 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2864 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2865 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2866 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2867 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2868 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2869 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2870 %p9%t\E(0%e\E(B%;$<2>,
2871 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2872 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2873 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl, use=vt220+cvis,
2875 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2876 # a missing <sc> -- esr)
2877 # add msgr and other capabilities from vt220 -TD
2879 am, mir, msgr, xenl, xon,
2880 cols#80, it#8, lines#24, vt#3,
2881 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2882 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2883 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2884 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2885 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>,
2886 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2887 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J$<50>,
2888 el=\E[K$<3>, el1=\E[1K, enacs=\E)0,
2889 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2890 ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2891 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
2892 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2893 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
2894 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
2895 kf8=\E[20~, kf9=\E[21~, nel=\EE, rc=\E8, rev=\E[7m$<2>,
2896 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2897 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2898 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2899 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2900 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2901 %p9%t\E(0%e\E(B%;$<2>,
2902 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2903 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2904 use=vt220+vtedit, use=ansi+pp, use=dec+sl, use=ansi+enq,
2907 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2908 # takes two parameters, the key and the string. Translating the key is
2909 # straightforward (keys 1-5 are not defined on real terminals, though some
2910 # emulators define these):
2912 # if (key < 16) then value = key;
2913 # else if (key < 21) then value = key + 1;
2914 # else if (key < 25) then value = key + 2;
2915 # else if (key < 27) then value = key + 3;
2916 # else if (key < 30) then value = key + 4;
2917 # else value = key + 5;
2919 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2920 # There's no provision in terminfo for emitting a string in this format, so the
2921 # application has to know it.
2923 vt420pc|DEC VT420 w/PC keyboard,
2924 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2925 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
2926 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
2927 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
2928 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
2929 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
2930 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
2931 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
2932 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
2933 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
2934 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
2935 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
2936 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2937 pctrm=USR_TERM:vt420pcdos:,
2938 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
2939 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
2943 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2945 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
2946 %{127}%=%t\E\177%e%p1%c%;,
2948 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2949 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2951 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2952 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2953 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2954 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2955 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2956 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2957 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2962 vt510pc|DEC VT510 w/PC keyboard,
2964 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2969 # The VT520 is a monochrome text terminal capable of managing up to
2970 # four independent sessions in the terminal. It has multiple ANSI
2971 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2972 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2973 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2975 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2976 # [Alt]/[Print Screen] depending upon which keyboard and which
2977 # terminal mode is being used. If Set-Up has been disabled or
2978 # assigned to an unknown key, Set-Up may be entered by pressing
2979 # [F3] as the first key after power up, regardless of keyboard type.
2981 use=ansi+rca, use=vt420, use=ansi+tabs,
2986 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
2987 # Keyboard, which replaces the old LK41R-AA keyboard.
2989 # In trying to get the function keys to work, I had to cobble my own
2990 # terminfo.src entry, since the existing vt520 entry doesn't include most of
2991 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
2992 # I seem to get them all -Mike Gran
2993 vt520ansi|Boundless VT520 ANSI,
2994 use=ansi+rca, use=vt420f, use=vt220+keypad,
2997 #### VT100 emulations
2999 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3000 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3001 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3002 # that this works best with a stock vt100 entry.
3003 dec-vt100|EWAN telnet's vt100 emulation,
3006 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3007 dec-vt220|DOS tnvt200 terminal emulator,
3010 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3011 # anyone who needs PC VT340 emulation. (or anything below that level, for
3012 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3013 # RDBM systems, it includes ReGIS and Sixel support! I'm impressed...
3014 # I can send the address if requested.
3015 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3016 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3017 z340|zstem vt340 terminal emulator 132col 42line,
3019 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3020 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3021 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3023 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3024 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3026 # expect-5.44.1.15/example/tkterm
3027 # a minimal subset of a vt100 (compare with "news-unk).
3029 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3030 tt|tkterm|Don Libes' tk text widget terminal emulator,
3031 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
3032 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
3033 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3034 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3041 # nsterm*|Apple_Terminal - AppKit Terminal.app
3043 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
3044 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
3045 # Server and Mac OS X operating systems. There is also a
3046 # "terminal.app" in GNUstep, but I believe it to be an unrelated
3047 # codebase and I have not attempted to describe it here.
3049 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
3050 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
3051 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
3052 # version supports color.
3054 # To determine the version of Terminal.app you're using by running:
3056 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
3058 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
3060 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
3062 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
3064 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
3066 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
3068 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
3069 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
3070 # might work too, but really you're on your own here since these
3071 # systems are very obsolete and I can't test them. I do welcome
3072 # patches, though :).
3076 # For GNUstep_Terminal, you're probably best off using "linux" or
3077 # writing your own terminfo.
3079 # For MacTelnet, you're on your own. It's a different codebase, and
3080 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
3082 # For iTerm.app, see "iterm".
3085 # The AppKit Terminal.app descriptions all have names beginning with
3086 # "nsterm". Note that the statusline (-s) versions use the window
3087 # titlebar as a phony status line, and may produce warnings during
3088 # compilation as a result ("tsl uses 0 parameters, expected 1".)
3089 # Ignore these warnings, or even ignore these entries entirely. Apps
3090 # which need to position the cursor or do other fancy stuff inside the
3091 # status line won't work with these entries. They're primarily useful
3092 # for programs like Pine which provide simple notifications in the
3093 # status line. Please note that non-ASCII characters don't work right
3094 # in the status line, since Terminal.app incorrectly interprets their
3095 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
3096 # versions) or only accepts status lines consisting entirely of
3097 # characters from the first 256 Unicode positions (including C1 but
3100 # The Mythology* of AppKit Terminal.app:
3102 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
3103 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
3104 # shareware replacement for Terminal called "Stuart" which NeXT bought
3105 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
3106 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
3107 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
3108 # capabilities for the early versions, but I believe that the
3109 # TERM_PROGRAM_VERSION may have been reset at some point.
3111 # The early versions were tailored to the NeXT character set. Sometime
3112 # after the Apple acquisition the encoding was switched to MacRoman
3113 # (initially with serious altcharset bugs due to incomplete conversion
3114 # of the old NeXT code,) and then later to UTF-8. Also sometime during
3115 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
3116 # 8-color support (initially buggy when combined with attributes, but
3117 # that was later fixed.) More recently, around Mac OS X version 10.3
3118 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
3119 # some versions (for instance 133-1 which shipped with Mac OS X
3120 # version 10.4) this suffered from the <bce> bug, but that seems to
3121 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
3123 # In the early days of Mac OS X the terminal was fairly buggy and
3124 # would routinely crash under load. Many of these bugs seem to have
3125 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
3126 # some may still remain. This change seems to correspond to
3127 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
3128 # it did previously.
3130 # * This may correspond with what actually happened, but I don't
3131 # know. It is based on guesswork, hearsay, private correspondence,
3132 # my faulty memory, and the following online sources and references:
3134 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
3135 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
3137 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
3138 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
3140 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
3141 # "nsterm" to comply with the name length and case conventions and
3142 # limitations of various software packages [notably Solaris terminfo
3143 # and UNIX.] A single Apple_Terminal alias is retained for
3144 # backwards-compatibility.
3146 # * Added function key support (F1-F4). These only work in Terminal.app
3147 # version 51, hopefully the capabilities won't cause problems for people
3150 # * Added "full color" (-c) entries which support the 16-color mode in
3153 # * By default, version 51 uses UTF-8 encoding with broken altcharset
3154 # support, so "ASCII" (-7) entries without altcharset support were
3157 # nsterm - AppKit Terminal.app
3159 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
3160 # Terminal.app. It is a partial VT100 emulation with some xterm-like
3161 # extensions. This terminfo was written to describe versions 41
3162 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
3163 # version 10.1) of Terminal.app.
3165 # Terminal.app runs under the Mac OS X Quartz windowing system (and
3166 # other AppKit-supported windowing systems.) On the Mac OS X machine I
3167 # use, the executable for Terminal.app is:
3168 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
3170 # If you're looking for a description of the full-screen system
3171 # console which runs under Apple's Darwin operating system on PowerPC
3172 # platforms, see the "xnuppc" entry instead.
3174 # There were no function keys in version 41. In version 51, there are
3175 # four working function keys (F1, F2, F3 and F4.) The function keys
3176 # are included in all of these entries.
3178 # It does not support mouse pointer position reporting. Under some
3179 # circumstances the cursor can be positioned using option-click; this
3180 # works by comparing the cursor position and the selected position,
3181 # and simulating enough cursor-key presses to move the cursor to the
3182 # selected position. This technique fails in all but the simplest
3185 # It provides partial ANSI color support (background colors interacted
3186 # badly with bold in version 41, though, as reflected in :ncv:.) The
3187 # monochrome (-m) entries are useful if you've disabled color support
3188 # or use a monochrome monitor. The full color (-c) entries are useful
3189 # in version 51, which doesn't exhibit the background color bug. They
3190 # also enable an xterm-compatible 16-color mode.
3192 # The configurable titlebar is set using xterm-compatible sequences;
3193 # it is used as a status bar in the statusline (-s) entries. Its width
3194 # depends on font sizes and window sizes, but 50 characters seems to
3195 # be the default for an 80x24 window.
3197 # The MacRoman character encoding is used for some of the alternate
3198 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
3199 # disable alternate character set support entirely, and the "VT100"
3200 # (-acs) entries rely instead on Terminal.app's own buggy VT100
3201 # graphics emulation, which seems to think the character encoding is
3202 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
3203 # are useful in Terminal.app version 51, which supports UTF-8 and
3204 # other ASCII-compatible character encodings but does not correctly
3205 # implement VT100 graphics; once VT100 graphics are correctly
3206 # implemented in Terminal.app, the "VT100" (-acs) entries should be
3207 # usable in any ASCII-compatible character encoding [except perhaps
3208 # in UTF-8, where some experts argue for disallowing alternate
3209 # characters entirely.]
3211 # Terminal.app reports "vt100" as the terminal type, but exports
3212 # several environment variables which may aid detection in a shell
3213 # profile (i.e. .profile or .login):
3216 # TERM_PROGRAM=Apple_Terminal
3217 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
3218 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
3220 # For example, the following Bourne shell script would detect the
3221 # correct terminal type:
3223 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
3226 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
3234 # In a C shell derivative, this would be accomplished by:
3236 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
3237 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
3238 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
3239 # setenv TERM "nsterm-old"
3241 # setenv TERM "nsterm-c-7"
3246 # The '+' entries are building blocks
3247 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
3248 am, bw, msgr, xenl, xon,
3249 cols#80, it#8, lines#24,
3250 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3251 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3252 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3253 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3254 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
3255 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3256 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
3257 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
3258 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3259 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3260 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3261 %p5%t;2%;%?%p7%t;8%;m,
3262 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3263 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
3265 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
3266 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3267 enacs=\E(B\E)0, rmacs=^O,
3268 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3269 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3270 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3272 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
3273 acsc=+\335\,\334-\366.\3770#`\327a:f\241g\261h#i
3274 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
3275 \271|\255}\243~\245,
3276 enacs=\E(B\E)0, rmacs=^O,
3277 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3278 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3279 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3281 # compare with xterm+sl-twm
3282 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
3283 wsl#50, use=xterm+sl-twm,
3285 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
3286 op=\E[0m, use=ibm+16color,
3288 nsterm+c41|AppKit Terminal.app v41 color support,
3289 colors#8, ncv#37, pairs#64,
3290 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3292 # These are different combinations of the building blocks
3294 # ASCII charset (-7)
3295 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
3298 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
3299 use=nsterm+s, use=nsterm+7,
3301 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
3302 use=nsterm+c41, use=nsterm+7,
3304 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
3305 use=nsterm+c, use=nsterm+7,
3307 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
3308 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
3310 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
3311 use=nsterm+s, use=nsterm+c, use=nsterm+7,
3313 # VT100 alternate-charset (-acs)
3314 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
3317 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
3318 use=nsterm+s, use=nsterm+acs,
3320 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
3321 use=nsterm+c41, use=nsterm+acs,
3323 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
3324 use=nsterm+c, use=nsterm+acs,
3326 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
3327 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
3329 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
3330 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
3333 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
3336 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
3337 use=nsterm+s, use=nsterm+mac,
3339 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
3340 use=nsterm+c41, use=nsterm+mac,
3342 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
3343 use=nsterm+c, use=nsterm+mac,
3345 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
3346 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
3348 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
3349 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
3351 # In Mac OS X version 10.5 the format of the preferences has changed
3352 # and a new, more complex technique is needed, e.g.,
3354 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
3355 # "NSUserDefaults");ud=NSUserDefaults.alloc();
3356 # ud.init();prefs=ud.persistentDomainForName_(
3357 # "com.apple.Terminal");prefs["Window Settings"][
3358 # prefs["Default Window Settings"]]["TerminalType"
3359 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
3360 # "com.apple.Terminal")' nsterm-16color
3362 # and it is still not settable from the preferences dialog. This is
3363 # tracked under rdar://problem/7365108 and rdar://problem/7365134
3364 # in Apple's bug reporter.
3366 # In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
3367 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
3368 # vt52, vt100, vt102 and xterm.
3369 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
3371 dch=\E[%p1%dP, dch1=\E[P, flash=\E[?5h$<200/>\E[?5l,
3372 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~,
3373 kend=\E[F, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3374 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3375 kf17=\E[31~, kf18=\E[22~, kf19=\E[33~, kf20=\E[34~,
3376 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3377 khome=\E[H, knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8,
3378 rmir=\E[4l, smcup=\E7\E[?47h, smir=\E[4h,
3379 vpa=\E[%i%p1%dd, kLFT5=\E[5D, kRIT5=\E[5C,
3380 use=nsterm-c-s-acs, use=vt220+cvis,
3382 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
3383 # the background color erase feature. The newer version 240.2 in Mac OS X
3384 # version 10.5 does not.
3386 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
3387 # and D P Schreber comparing to nsterm-c-s-acs.
3389 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
3390 # can be set in Terminal.app, e.g.,
3392 # defaults write com.apple.Terminal TermCapString nsterm-bce
3394 # and that it is not set in Terminal's preferences dialog.
3396 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
3399 # * The terminal description matches the default settings.
3400 # * The keyboard is configurable via a dialog.
3401 # * By default khome, kend, knext and kprev are honored only with a
3403 # * There are bindings for control left/right arrow (but not up/down).
3404 # Added those to nsterm-16color, which is the version used for OS X 10.6
3405 # * "Allow VT100 application keypage mode" is by default disabled.
3406 # There is no way to press keypad-comma unless application mode is enabled
3408 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3409 # * CHT, REP, SU, SD are buggy.
3410 # * ECH works (also in Leopard), but is not used here for compatibility.
3411 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
3412 # xterm-256color. However, it adds "nsterm", so it is possible to use the
3413 # nsterm entry from this file to override the MacPorts (20110404) or
3414 # system (20081102) copy of this file.
3415 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
3416 # dialog defaults to xterm-256color. Alternative selections are ansi,
3417 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
3418 # the menu says "Declare terminal as" without promising to actually emulate
3419 # the corresponding terminals. Indeed, changing TERM does not affect the
3420 # emulation itself. This means that
3421 # + the function-keys do not match for dtterm for kf1-kf4 as well as
3423 # + the color model is the same for each setting of TERM (does not match
3425 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
3426 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
3427 # + the vt52 emulation does not give a usable shell because screen-clearing
3428 # does not work as expected.
3429 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
3430 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
3431 # as well as unmasking F10 (which had been used in the window manager). Those
3432 # keys are listed in this entry.
3433 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
3434 bce, use=nsterm-16color,
3436 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
3437 # TERM_PROGRAM_VERSION=309
3438 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
3439 # TERM_PROGRAM_VERSION=303
3440 nsterm-build309|Terminal.app in OS X 10.8,
3441 use=xterm+256setaf, use=nsterm-bce,
3443 # removed bogus kDC7 -TD
3444 nsterm-build326|Terminal.app in OS X 10.9,
3445 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
3446 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
3447 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,
3450 nsterm-build343|Terminal.app in OS X 10.10,
3451 kend=\EOF, khome=\EOH, use=nsterm-build326,
3453 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
3455 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
3456 # + f1-f4 map to pf1-pf4
3457 # + no vt220 support aside from DECTCEM and ECH
3458 # + there are no protected areas. Forget about anything above vt220.
3459 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
3460 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
3461 # + but bce fails for 11.6.7.2 (test repeat).
3462 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
3463 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
3464 # + normal (not X10 or Highlight tracking) mouse now works.
3465 # + mouse any-event works
3466 # + mouse button-event works
3467 # + in alternate screen:
3469 # mode 1047 fails to restore cursor position (do not use)
3470 # mode 1049 fails to restore screen contents (do not use)
3471 # + dtterm window-modify operations work (some messages are not printed)
3472 # + dtterm window-report gives size of window in characters/pixels as
3473 # well as state of window.
3475 # + there is no difference between cnorm/cvvis
3476 # + has dim/invis/blink (no protect of course)
3477 # + most function keys with shift/control modifiers give beep
3478 # (user can configure, but out-of-the-box is what I record)
3479 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
3481 # + kLFT5/kRIT5 work, but not up/down with control-modifier
3482 # + kLFT/kRIT work, but not up/down with shift-modifier
3483 # + there are a few predefined bindings with Alt, but no clear pattern.
3484 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
3485 # Using ncurses test-program with xterm-new:
3487 # Using xterm's scripts:
3488 # + palette for 256-colors is hardcoded.
3489 # + no support for "dynamic colors"
3490 # + no support for tcap-query.
3491 nsterm-build361|Terminal.app in OS X 10.11,
3493 kmous=\E[M, use=nsterm-build343,
3495 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
3496 # Comparing with build361, little has changed, except that italics work.
3497 # Direct-color is not supported, by the way.
3499 # Improved rmso/rmul -TD
3500 nsterm-build400|Terminal.app in OS X 10.13,
3501 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
3502 use=ecma+italics, use=nsterm-build361,
3504 # This is an alias which should always point to the "current" version
3505 nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
3506 use=nsterm-build400,
3512 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
3513 # featureful) terminal emulator for Mac OS X. It is similar enough in
3514 # capabilities to nsterm-16color that I have derived this description from that
3515 # one, but as far as I know they share no code. Many of the features are
3516 # user-configurable, but I attempt only to describe the default configuration
3519 # According to its documentation, iTerm uses terminfo to obtain function key
3520 # definitions. For example, if it is started with TERM=xterm, it uses key
3521 # definitions from that terminal description from the local OSX machine. Those
3522 # $TERM settings may be augmented using the bookmark and profile dialogs.
3523 # However, the behavior seen with tack does not agree with either the terminfo
3524 # description or the function keys in its "xterm" profile.
3528 # reports primary DA as VT100 with AVO: \E[?1;2c
3529 # reports secondary DA as "\E[>0;95;c"
3530 # supports blink and underline
3531 # displays bold text as red
3532 # recognizes all dtterm controls for modifying/querying window
3533 # resizing via escape sequence is very slow
3534 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
3535 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
3536 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
3539 # with ncurses test-program:
3540 # ncurses 'k' has problem in second screen; light background does not fill
3541 # with xterm scripts
3542 # can display/alter xterm-256color cube
3543 # can display/alter xterm-88color cube
3544 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
3545 am, bce, hs, mir, msgr, npc, xenl, xon,
3546 cols#80, it#8, lines#24, wsl#50,
3547 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3548 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3549 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3550 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3551 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3552 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3553 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3554 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3555 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3556 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
3557 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3558 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
3559 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3560 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3561 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
3562 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3563 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3564 rmso=\E[m, rmul=\E[m,
3565 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3566 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
3568 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3569 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3570 tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
3571 use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
3572 use=xterm+x11mouse, use=xterm+256setaf, use=vt220+cvis,
3576 # https://www.iterm2.com/
3577 # https://github.com/gnachman/iTerm2
3578 # ~/Library/Preferences/com.googlecode.iterm2.plist
3579 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
3583 # reports primary DA as VT100 with AVO: \E[?1;2c
3584 # reports secondary DA as "\E[>0;95;0c"
3585 # numeric keypad application mode does not work
3586 # by default, dtterm window-modifications are ignored
3587 # by default, dtterm window-reports return, but icon as "L", window as "l"
3588 # supports SD/SU, no REP, SL, SR
3589 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
3590 # no improvement to XFree86 1047/1048 modes
3592 # in meta-mode, imitates xterm, sending UTF-8
3593 # special-key modifiers based on xterm use incompatible default for alt/meta
3594 # with ncurses test-program:
3596 # no improvement to ncurses 'k'
3597 # with xterm scripts:
3600 # Italic text did not work initially, apparently because upgrading did not
3601 # add/change that preference (set in Preferences, Profiles, Text). A new
3602 # install of iTerm 3.0.15 provides italics by default (blinking text is an
3603 # option in the preferences dialog).
3605 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
3606 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
3607 iTerm2.app|iterm2|terminal emulator for Mac OS X,
3608 blink=\E[5m, cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F,
3609 kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P,
3610 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
3611 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
3612 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3613 kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A, nel=\EE,
3614 op=\E[39;49m, rmso=\E[27m, rmul=\E[24m,
3615 rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
3616 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3617 %p5%t;2%;m%?%p9%t\016%e\017%;,
3618 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
3619 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
3620 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
3621 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
3622 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
3623 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
3624 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
3625 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
3626 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index,
3627 use=xterm+alt+title, use=ecma+italics, use=iterm,
3629 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
3631 # On PowerPC platforms, Apple's Darwin operating system uses a
3632 # full-screen system console derived from a NetBSD framebuffer
3633 # console. It is an ANSI-style terminal, and is not really VT-100
3636 # Under Mac OS X, this is the system console driver used while in
3637 # single-user mode [reachable by holding down Command-S during the
3638 # boot process] and when logged in using console mode [reachable by
3639 # typing ">console" at the graphical login prompt.]
3641 # If you're looking for a description of the Terminal.app terminal
3642 # emulator which runs under the Mac OS X Quartz windowing system (and
3643 # other AppKit-supported windowing systems,) see the "nsterm"
3646 # NOTE: Under Mac OS X version 10.1, the default login window does not
3647 # prompt for user name, instead requiring an icon to be selected from
3648 # a list of known users. Since the special ">console" login is not in
3649 # this list, you must make one of two changes in the Login Window
3650 # panel of the Login section of System Prefs to make the special
3651 # ">console" login accessible. The first option is to enable 'Show
3652 # "Other User" in list for network users', which will add a special
3653 # "Other..." icon to the graphical login panel. Selecting "Other..."
3654 # will present the regular graphical login prompt. The second option
3655 # is to change the 'Display Login Window as:' setting to 'Name and
3656 # password entry fields', which replaces the login panel with a
3657 # graphical login prompt.
3659 # There are no function keys, at least not in Darwin 1.3.
3661 # It has no mouse support.
3663 # It has full ANSI color support, and color combines correctly with
3664 # all three supported attributes: bold, inverse-video and underline.
3665 # However, bold colored text is almost unreadable (bolding is
3666 # accomplished using shifting and or-ing, and looks smeared) so bold
3667 # has been excluded from the list of color-compatible attributes
3668 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
3669 # monochrome monitor.
3671 # There is one serious bug with this terminal emulation's color
3672 # support: repositioning the cursor onto a cell with non-matching
3673 # colors obliterates that cell's contents, replacing it with a blank
3674 # and displaying a colored cursor in the "current" colors. There is
3675 # no complete workaround at present [other than using the monochrome
3676 # (-m) entries,] but removing the (msgr) capability seemed to help.
3678 # The "standout" chosen was simple reverse-video, although a colorful
3679 # standout might be more aesthetically pleasing. Similarly, the bold
3680 # chosen is the terminal's own smeared bold, although a simple
3681 # color-change might be more readable. The color-bold (-b) entries
3682 # uses magenta colored text for bolding instead. The fancy color (-f
3683 # and -f2) entries use color for bold, standout and underlined text
3684 # (underlined text is still underlined, though.)
3686 # Apparently the terminal emulator does support a VT-100-style
3687 # alternate character set, but all the alternate character set
3688 # positions have been left blank in the font. For this reason, no
3689 # alternate character set capabilities have been included in this
3690 # description. The console driver appears to be ASCII-only, so (enacs)
3691 # has been excluded [although the VT-100 sequence does work.]
3693 # The default Mac OS X and Darwin installation reports "vt100" as the
3694 # terminal type, and exports no helpful environment variables. To fix
3695 # this, change the "console" entry in /etc/ttys from "vt100" to
3696 # "xnuppc-WxH", where W and H are the character dimensions of your
3697 # console (see below.)
3699 # The font used by the terminal emulator is apparently one originally
3700 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
3701 # file includes descriptions for the following geometries:
3703 # Pixels Characters Entry Name (append -m for monochrome)
3704 # -------------------------------------------------------------------
3705 # 640x400 80x25 xnuppc-80x25
3706 # 640x480 80x30 xnuppc-80x30
3707 # 720x480 90x30 xnuppc-90x30
3708 # 800x600 100x37 xnuppc-100x37
3709 # 896x600 112x37 xnuppc-112x37
3710 # 1024x640 128x40 xnuppc-128x40
3711 # 1024x768 128x48 xnuppc-128x48
3712 # 1152x768 144x48 xnuppc-144x48
3713 # 1280x1024 160x64 xnuppc-160x64
3714 # 1600x1024 200x64 xnuppc-200x64
3715 # 1600x1200 200x75 xnuppc-200x75
3716 # 2048x1536 256x96 xnuppc-256x96
3718 # The basic "xnuppc" entry includes no size information, and the
3719 # emulator includes no reporting capability, so you'll be at the mercy
3720 # of the TTY device (which reports incorrectly on my hardware.) The
3721 # color-bold entries do not include size information.
3723 # The '+' entries are building blocks
3724 xnuppc+basic|Darwin PowerPC Console basic capabilities,
3727 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3728 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
3729 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3730 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
3731 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
3732 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
3733 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
3734 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3736 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3737 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3738 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
3740 xnuppc+c|Darwin PowerPC Console ANSI color support,
3741 colors#8, ncv#32, pairs#64,
3742 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3744 xnuppc+b|Darwin PowerPC Console color-bold support,
3747 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3750 xnuppc+f|Darwin PowerPC Console fancy color support,
3752 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
3754 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
3756 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
3759 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
3760 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
3762 # Building blocks for specific screen sizes
3763 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
3766 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
3769 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
3772 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
3775 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
3778 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
3781 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
3784 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
3787 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
3790 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
3793 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
3796 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
3797 cols#0x100, lines#96,
3799 # These are different combinations of the building blocks
3801 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
3804 xnuppc|darwin|Darwin PowerPC Console (color),
3805 use=xnuppc+c, use=xnuppc+basic,
3807 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
3810 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
3811 use=xnuppc+b, use=xnuppc+c,
3813 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
3816 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
3817 use=xnuppc+f, use=xnuppc+c,
3819 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
3822 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
3823 use=xnuppc+f2, use=xnuppc+c,
3825 # Combinations for specific screen sizes
3826 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
3827 use=xnuppc+80x25, use=xnuppc+basic,
3829 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
3830 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
3832 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
3833 use=xnuppc+80x30, use=xnuppc+basic,
3835 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
3836 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
3838 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
3839 use=xnuppc+90x30, use=xnuppc+basic,
3841 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
3842 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
3844 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
3845 use=xnuppc+100x37, use=xnuppc+basic,
3847 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
3848 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
3850 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
3851 use=xnuppc+112x37, use=xnuppc+basic,
3853 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
3854 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
3856 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
3857 use=xnuppc+128x40, use=xnuppc+basic,
3859 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
3860 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
3862 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
3863 use=xnuppc+128x48, use=xnuppc+basic,
3865 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
3866 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
3868 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
3869 use=xnuppc+144x48, use=xnuppc+basic,
3871 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
3872 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
3874 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
3875 use=xnuppc+160x64, use=xnuppc+basic,
3877 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
3878 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
3880 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
3881 use=xnuppc+200x64, use=xnuppc+basic,
3883 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
3884 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
3886 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
3887 use=xnuppc+200x75, use=xnuppc+basic,
3889 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
3890 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
3892 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
3893 use=xnuppc+256x96, use=xnuppc+basic,
3895 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
3896 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
3898 ######## DOS/WINDOWS
3899 # CRT is shareware. It implements some xterm features, including mouse.
3900 crt|crt-vt220|CRT 2.3 emulating VT220,
3903 hts=\EH, use=vt100+enq, use=vt220-base, use=ecma+color,
3905 # SecureCRT 8.7.3.2279
3906 # 8.7.3 was released 2020/08/11
3908 # VanDyke Software, Inc.
3910 # Advertised features:
3911 # Xterm 24-bit color
3913 # Double-size characters
3914 # Xterm extensions for mouse support and changing title bar
3915 # Emulates VT100, VT102, VT220, VT320, Linux console, SCO ANSI,
3916 # TN3270, TVI910, TVI925, Wyse 50/60, and ANSI.
3918 # Added ANSI sc/rc and REP in 2019/12/17
3919 # Added TVI910/ TVI925 in 2019/11/20
3922 # Emulate "Xterm", using "ANSI with 256color"
3923 # TERM=xterm-256color
3926 # DA1 \E[?62;1;2;6;7;8;9c (vt220 with DRCS and NRCS)
3928 # double-sized characters do not work
3929 # Menu-1 fails (window resizes to 132-columns, but does not repaint)
3930 # NRCS fails (tried French, but none of the replacements worked)
3931 # VT100 line-drawing works, except the C/R, etc., are an hline.
3932 # VT52 works except for S8C1T bug.
3933 # RIS hangs the terminal.
3934 # Local SRM does not echo.
3935 # Some of the VT320/VT220 status reports work, not locator or DECXCPR
3936 # DECUDK works if I press shift.
3937 # Fails CHT, CNL, CPL
3938 # Does not honor bce with ECH
3939 # ERM/SPA does not work
3940 # REP has 11 +'s except for final 2 +'s, like PuTTY.
3942 # DECRPM does not respond.
3943 # dtterm modify/report operations do not work
3944 # Alternate screen works.
3946 # highlight tracking does not work.
3947 # any event tracking does not work, but
3948 # button event tracking does work.
3949 # DEC locator does not work.
3950 # SGR coordinates does not work.
3952 # reset6 does reset to 80-columns
3953 # ncurses RGB edit does not work.
3954 # direct colors don't work, probably needs semicolons.
3956 # blink works, but not dim or invis
3957 # no italics or crossed-out
3959 # 256color handles "-r" option (but test/ncurses menu d does not alter)
3960 # dynamic colors queries do not work, though it seems some can be set.
3961 # resize.pl gets no reply, resize.sh needs fix for no reply.
3962 scrt|securecrt|SecureCRT emulating xterm-256color,
3964 bel@, cvvis@, kcbt=\E[Z, kent=\EOM, use=vt220+pcedit,
3965 use=xterm+256setaf, use=ecma+index, use=ansi+rep,
3966 use=xterm+keypad, use=xterm+pcfkeys, use=xterm-basic,
3970 # 11.24 was released 2020/08/13
3971 # Celestial Software
3973 # Advertised features:
3974 # Emacs compatibility mode (Meta Keys can be enabled for left/right ALT)
3975 # Double-size characters
3976 # Xterm extensions for mouse support
3977 # Emulates VT52, VT100, VT220, VT320, ansi, xterm, qnx, scoansi,
3978 # ANSIBBS, WYSE60, Televideo 950.
3984 # DA1: \E[?62;1;2;6;7;8;9;15;22c (VT200 with DRCS, UDK, NRCS)
3987 # + NRCS tests do not work
3988 # + DECUDK test fails
3989 # + VT100 double-sized characters work
3990 # menu-1 autowrap does not work
3991 # supports blinking text
3992 # VT220 DECSCA last screen (ignoring ECH, etc), leaves fill on top/left
3993 # VT220 device status reports fail, except operating status
3994 # 8-bit controls work
3995 # xterm alternate screen recognized, but cursor restored incorrectly
3996 # xterm mouse (normal, any event, button event) works
3997 # xterm highlight-mouse does not work properly, confused with any-event
3998 # does not recognize SGR-mouse mode
3999 # supports xterm window-modifiny/reporting controls
4000 # supports ECMA-48 cursor movement except HPR
4001 # supports REP and SD, but not ECMA-48 SL, SR, SU
4003 # italics and crossed-out do not work
4004 # supports xterm-style modified function-keys, using X11R6 F1-F4.
4005 # does not support modified cursor-keys or editing-keys
4006 # uses VT220-style Home/End
4007 # if alt-keys are enabled,
4008 # meta-mode sends escape rather than shifting, in 7-bit mode
4009 # meta-mode does the expected shifting in 8-bit mode
4011 # supports 256-colors, including changing palette (ncurses menu d works)
4012 # supports UTF-8, but honors VT100 line-drawing
4013 absolute|Absolute Telnet emulating xterm,
4014 kcbt=\E[Z, use=ecma+index, use=ansi+rep,
4015 use=vt220+pcedit, use=xterm+keypad, use=xterm+app,
4016 use=xterm+pcf0, use=xterm+256color, use=xterm+x11mouse,
4020 # PuTTY 0.74 (27 June 2020)
4021 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
4023 # PuTTY 0.73 (September 2019)
4024 # Testing with tack:
4025 # does not implement italics
4026 # does not implement cross-out text
4027 # its settings dialog allows some of the VT100 line-drawing tests to pass
4028 # (not the padding test, though)
4029 # Testing with vttest:
4030 # xterm mouse modes are incomplete: X10, highlight, any-event, and focus in/out modes are not implemented.
4031 # does not implement protected areas
4032 # does not implement SL/SR
4034 # PuTTY 0.71 (March 2019) provided a workable "rep" capability. It also
4035 # changed longstanding keypad assignments, so that these no longer apply:
4036 # kLFT=\E[D, kRIT=\E[C, kb2=\E[G,
4038 # PuTTY recognized xterm's 1006 mouse mode in late 2015; subsequent release was
4039 # in 2017 (0.70) -TD
4041 # Comparing with 0.51, vttest is much better (only a few problems with the
4042 # cursor position reports and wrapping).
4044 # PuTTY 0.51 (14 December 2000)
4046 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
4047 # well as SCO and Atari, color palettes from Linux console). Reading the code,
4048 # it is intended to be VT102 plus selected features. By default, it sets $TERM
4049 # to xterm, which is incorrect, since several features are misimplemented:
4051 # Alt+key always sends ESC+key, so 'km' capability is removed.
4053 # Control responses, wrapping and tabs are buggy, failing a couple of
4054 # screens in vttest.
4056 # xterm mouse support is not implemented (unreleased version may).
4058 # Several features such as backspace/delete are optional; this entry documents
4059 # the default behavior. None of the combinations of keyboard settings match
4060 # those used for xterm -TD
4062 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
4063 # but implements it incorrectly as mentioned here:
4064 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
4065 putty|PuTTY terminal emulator,
4066 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
4067 colors#8, it#8, ncv#22, pairs#64, U8#1,
4068 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4069 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
4070 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4071 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
4072 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4073 dch=\E[%p1%dP, dch1=\E[P,
4074 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
4075 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
4076 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
4077 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
4078 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
4079 %%G\340\202\242\E%%@%e%p1%c%;,
4080 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4081 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
4082 home=\E[H, hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\n,
4083 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
4084 %02x%p4%{255}%*%{1000}%/%02x,
4085 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
4086 kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4087 kcuu1=\EOA, kind=\E[B, kri=\E[A, kspd=^Z, nel=\r\n, oc=\E]R,
4088 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4089 rmam=\E[?7l, rmcup=\E[2J\E[?47l, rmir=\E[4l,
4090 rmkx=\E[?1l\E>, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
4091 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
4092 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
4093 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4094 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4095 %;m%?%p9%t\016%e\017%;,
4096 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
4097 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
4098 smul=\E[4m, vpa=\E[%i%p1%dd, E3=\E[3J, use=vt220+pcedit,
4099 use=ansi+tabs, use=ansi+rep, use=ecma+index,
4100 use=xterm+sm+1006, use=putty+fnkeys, use=vt102+enq,
4101 use=xterm+sl, use=vt100+fnkeys, use=putty+keypad,
4103 putty+keypad|PuTTY numeric keypad,
4104 kp1=\EOq, kp2=\EOr, kp3=\EOs, kp4=\EOt, kp5=\EOu, kp6=\EOv,
4105 kp7=\EOw, kp8=\EOx, kp9=\EOy, kpADD=\EOl, kpDIV=\EOQ,
4106 kpDOT=\EOn, kpMUL=\EOR, kpNUM=\EOP, kpSUB=\EOS, kpZRO=\EOp,
4108 vt100-putty|Reset PuTTY to pure vt100,
4109 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
4111 putty-256color|PuTTY 0.58 with xterm 256-colors,
4112 use=xterm+256setaf, use=putty,
4113 putty-noapp|putty with cursor keys in normal mode,
4114 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4115 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
4118 # One of the keyboard selections is "VT100+".
4119 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
4120 putty-vt100|VT100+ keyboard layout,
4121 use=putty+fnkeys+vt100, use=putty,
4123 putty-sco|putty with SCO function keys,
4124 use=putty+fnkeys+sco, use=putty,
4126 # PuTTY has more than one section in its Keyboard configuration:
4127 # a) backspace/delete, which we ignore since that choice largely depends on
4128 # whether one matches Unix and BSD or Linux.
4129 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
4130 # are unrelated to rxvt's actual settings.
4131 # c) function keys and keypad - this is the interesting part. None of the
4132 # selections match any of their respective namesakes, but they are shown
4133 # here to help users who expect that the selections do what is implied.
4135 # This is the default setting for PuTTY
4136 putty+fnkeys|fn-keys for PuTTY,
4137 use=putty+fnkeys+esc,
4139 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
4140 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4141 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4142 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
4143 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
4144 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4146 putty+fnkeys+linux|Linux fn-keys for PuTTY,
4147 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4148 use=putty+fnkeys+esc,
4150 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
4151 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4152 use=putty+fnkeys+esc,
4154 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
4155 use=putty+fnkeys+esc,
4157 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
4159 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
4160 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
4161 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
4162 kf9=\EOX, use=putty+fnkeys+esc,
4164 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
4166 # Use modifiers to obtain function keys past 12:
4169 # F25-F36 - control/alt
4170 # F37-F48 - control/shift
4172 putty+fnkeys+sco|SCO fn-keys for PuTTY,
4173 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4174 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4175 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4176 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4177 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4178 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4179 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4180 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4181 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4182 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4183 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4184 kich1=\E[L, knp=\E[G, kpp=\E[I,
4187 # https://github.com/mintty/mintty
4189 # Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in
4190 # 2013 to 41ksloc in 2020. That is still smaller than PuTTY (160ksloc), but
4191 # larger than rxvt (31ksloc) and slightly smaller than rxvt-unicode (42ksloc).
4193 # Version 3.0 responds to DA as a VT400, however it does not implement the
4194 # application keypad. The assignment of cursor-keys versus modifiers differs
4195 # from xterm (alt-left and alt-right send modifier 7, i.e., alt+control).
4197 # Thomas Wolff suggested these extensions:
4198 # blink2 turn on rapid blinking
4199 # blink0 turn off blinking
4200 # norm turn off bold and half-bright mode
4201 # opaq turn off blank mode
4202 # smul2 begin double underline mode
4203 # smol begin overline mode
4204 # rmol exit overline mode
4205 # Font0 use default font
4206 # Font1 use alternative font 1
4208 # Font10 use alternative font 10
4209 # setal set (under)line color
4210 # ol set default (under)line color
4211 # overs overstrike (print characters over each other)
4213 # but see vte-2018 (use Smol/Rmol rather than smol/rmol).
4214 mintty|Cygwin Terminal,
4215 setal=\E[5%p1%dm, use=xterm+256color,
4217 mintty-direct|Cygwin Terminal direct-color,
4218 setal=\E[%?%p1%{8}%<%t5%p1%d%e58:2::%p1%{65536}%/%d:%p1
4219 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
4220 use=xterm+direct, use=mintty+common,
4221 mintty+common|shared capabilities for mintty,
4223 kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m,
4224 rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m,
4225 rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1:2m,
4226 ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m,
4227 Smulx=\E[4:%p1%dm, blink2=\E[6m, norm=\E[22m,
4228 opaq=\E[28m, smul2=\E[21m, use=ansi+rep,
4229 use=ecma+strikeout, use=ecma+index, use=vt420+lrmm,
4230 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4231 use=ecma+italics, use=xterm-basic,
4232 # 2019-06-09: These capabilities are commented-out for compatibility with
4233 # existing releases 5.9-6.1, and may be considered for inclusion after the
4234 # release of ncurses 6.2:
4252 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
4253 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
4254 # (communication program) which supports:
4256 # - Serial port connections.
4257 # - TCP/IP (telnet) connections.
4258 # - VT100 emulation, and selected VT200/300 emulation.
4259 # - TEK4010 emulation.
4260 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
4262 # - Scripts using the "Tera Term Language".
4263 # - Japanese and Russian character sets.
4265 # The program does not come with terminfo or termcap entries. However, the
4266 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
4267 # vt52 or doublesize character support; blinking is done with color). Besides
4268 # the HPA, VPA extensions it also implements CPL and CNL.
4270 # All of the function keys can be remapped. This description shows the default
4271 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
4272 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
4273 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
4281 # ANSI colors are implemented, but cannot be combined with video attributes
4282 # except for reverse.
4284 # No fonts are supplied with the program, so the acsc string is chosen to
4285 # correspond with the default Microsoft terminal font.
4287 # Tera Term recognizes some xterm sequences, including those for setting and
4288 # retrieving the window title, and for setting the window size (i.e., using
4289 # "resize -s"), though it does not pass SIGWINCH to the application if the
4290 # user resizes the window with the mouse.
4291 teraterm2.3|Tera Term Pro,
4294 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4295 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4296 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4297 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cuf1=\E[C,
4298 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4299 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4300 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l,
4301 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, kf1=\E[11~,
4302 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4303 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4304 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4305 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4306 kf8=\E[19~, kf9=\E[20~, op=\E[100m, rev=\E[7m, ri=\EM,
4307 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4308 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt220+vtedit,
4309 use=vt100+enq, use=klone+color, use=vt100,
4312 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
4313 # to choose a Windows OEM font).
4315 # Testing with tack:
4316 # - it does not have xenl (suppress that)
4317 # - underline seems to work with color (modify ncv).
4318 # Testing with vttest:
4319 # - wrapping differs from vt100 (menu 1).
4320 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4322 # - it recognizes the dtterm window controls for reporting size in
4323 # characters and pixels.
4324 # - it passes SIGWINCH.
4325 teraterm4.59|Tera Term Pro,
4328 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4329 kmous=\E[M, use=teraterm2.3,
4333 # Testing with tack:
4334 # - no bell (flash works)
4335 # - bold is yellow, blink is red.
4336 # - default keyboard sends ^? for Delete, can be configured for kdch1
4338 # Testing with vttest:
4339 # + autowrap has problems...
4340 # + color-tests for bce feature match xterm's behavior
4341 # + handles most of xterm's mouse-controls other than highlight-tracking.
4342 # xterm's SGR 1006 works.
4343 # + partial support for DEC locator-events
4344 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4345 # + has a "Tek" window, but does not work with vttest's examples
4346 # + supports the dtterm window modify/report controls
4347 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4349 # + VT220 screen-display tests are ok
4352 # + recognizes xterm's original direct-colors sequences, but result is
4354 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4355 teraterm4.97|Tera Term Pro,
4356 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4357 teraterm-256color|TeraTerm with xterm 256-colors,
4358 use=xterm+256setaf, use=teraterm,
4365 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4366 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4369 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4370 # for casual (occasional) use. Also fails several of the vttest screens,
4371 # but that is not unusual for vt100 "emulators".
4372 # b) Does not implement vt100 keypad
4373 # c) Recognizes a subset of vt52 controls.
4374 ms-vt100|MS telnet imitating dec vt100,
4376 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4377 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4378 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4379 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4380 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4382 # Tested with Windows 2000, the telnet application runs in a console window,
4383 # also using 'Terminal' font.
4386 # a) This version has no function keys or numeric keypad. Unlike the older
4387 # version, the numeric keypad is entirely ignored.
4388 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4389 ms-vt100-color|vtnt|windows 2000 ansi (sic),
4391 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4394 # Based on comments from Federico Bianchi:
4396 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4397 # scheme for PF keys.
4399 # and PuTTY wishlist:
4401 # The modifiers are represented as the codes listed above, prefixed to
4402 # the normal sequences. If the modifier is pressed alone, its sequence
4403 # is transmitted twice in succession. If multiple modifiers apply,
4404 # they're transmitted in the order shift, control, alt.
4409 ms-vt100+|vt100+|windows XP vt100+ (sic),
4410 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4411 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4412 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4413 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4414 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4415 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4416 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4417 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4418 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4419 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4420 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4421 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4422 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4423 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4424 knp=\E/, kpp=\E?, use=ms-vt100-color,
4426 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
4429 # Windows Terminal (Preview)
4430 # https://github.com/microsoft/terminal
4433 # Version 1.9.1942.0
4435 # This has longstanding issues with CR/LF mapping, e.g.,
4436 # - first reported by Juergen Pfeifer August 13, 2020, with workaround
4437 # - https://github.com/microsoft/terminal/issues/8303
4438 # - https://github.com/microsoft/terminal/issues/6733
4440 # still seen in testing during May-July 2021. As a workaround, this terminal
4441 # description sets cud1 to an escape sequence rather than just \r.
4443 # Using TERM=xterm-256color shows a number of problems.
4444 # A few are seen only in the WSL2 environment.
4447 # - flash does not work.
4448 # - video attribute blink does not work.
4449 # - video attribute invis does not work in WSL2.
4450 # - italics sitm/ritm do not work in WSL2.
4451 # - crossed-out smxx/rmxx do not work in WSL2.
4452 # - reloading colors via initp interchanges red/blue.
4453 # - does not implement OSC 104, which is used for resetting colors in xterm.
4454 # - does not support numeric keypad application mode.
4455 # - control-modifier (without alt/shift) does not work for special keys.
4456 # - meta-key sends escape character rather than acting as a meta key.
4459 # - identifies itself as a VT100.
4460 # - cursor movement (menu 1) does not work properly, e.g., for wrapping.
4461 # - does not support 8-bit controls.
4462 # - does not support VT420 rectangles.
4463 # - does not support VT420 left/right margins.
4464 # - ECMA-48 cursor-movement works.
4465 # - does not support X10 mouse, or mouse highlight tracking.
4466 # - SGR mouse mode 1006 works.
4467 # - any-event mouse mode shows no focus-in/focus-out events.
4468 # - alternate screen 47/48 modes do not work, nor do 1047/1048.
4469 # - alternate screen 1049 mode works.
4470 # - none of the window report/modify operations work.
4471 # - none of the DECRPM/DECRQM reporting operations work.
4474 # - 256colors2.pl -r, -i and -q options work.
4475 # - dynamic colors do not work.
4476 # - paste64.pl does not work, i.e., bracketed-paste.
4477 # - tcapquery.pl does not work.
4480 # Version 0.2.1831.0
4482 # The task manager shows this as "OpenConsole.exe", which differs
4483 # from the "Windows Command Processor" used for the command-prompt.
4485 # The settings dialog does not work (unless the end user expects to open
4486 # profiles.json in Visual Studio). There is no documentation, of course.
4488 # Testing via an ssh connection, using openssh:
4489 # - the program sets TERM to cygwin if the tab is set to PowerShell,
4490 # and to xterm-256color if "Legacy". However, in the latter, more tests
4491 # fail in vttest, which does not pay attention to TERM.
4493 # - menu 1 (tests for cursor movement) misbehaves like command-prompt
4494 # - primary DA says this is a vanilla VT100
4495 # - does not flush response to primary DA, leaving a ^M on the end when
4496 # the PowerShell tab is used. Both the "Legacy" tab and the command-prompt
4497 # work properly in this test.
4498 # - in the generic VT100 tests, there are problems with character sets
4499 # (diamond shows as a double-width character, DEL as two replacement-chars).
4500 # - outside of the generic VT100 tests, the program does poorly because most
4501 # of the features are missing.
4502 # - ECH does not work properly
4503 # - a few generic xterm features are supported (set window title), but
4504 # others are missing (such as the mouse).
4505 # - the cursor visible/invisible works in the PowerShell tab, not in "Legacy"
4507 # - blink, dim, bold, invis, protect do not work
4508 # - bce works (but per vttest, with ED, EL, not ECH)
4509 # - does not support keypad application mode
4510 # - implements most of the xterm modified keys; sometimes modifiers are ignored
4511 # or simply incorrect
4512 # - sends escape+key rather than implementing meta mode
4514 # - color palette can be altered, but OSC 104 for resetting does not work
4515 # - crashed with a script used for testing NRCS.
4516 # - does not recognize either xterm+direct or xterm+indirect escapes.
4517 ms-terminal|Windows10 terminal,
4519 cud1=\E[B, rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@,
4520 use=xterm+256setaf, use=xterm+pcfkeys, use=ansi+rep,
4521 use=xterm+sm+1006, use=ecma+index, use=ecma+italics,
4525 # Visual Studio Code 1.45.0 uses xterm.js 12.8.1 (see https://xtermjs.org/).
4528 # - fixes menu 1 problem with wrapping
4530 # - fixes menu 8 problem with delete-character
4532 # - keypad application mode still does not work; PF1-PF4 are not assigned.
4533 # - DECRQM/DECRPM do not work
4534 # - xterm mouse features:
4535 # - SGR coordinates work; the other modes do not (see vscode #96058)
4536 # - focus-events are not sent
4537 # - mouse highlight tracking does not send button event
4539 # - little or no change since previous review
4541 # Visual Studio Code 1.35.1 uses xterm.js (see https://xtermjs.org/).
4542 # https://code.visualstudio.com/docs/editor/integrated-terminal
4544 # This sets TERM to xterm-256color, which is a little more successful than
4548 # - menu 1 (cursor movement) has problems with wrapping
4549 # - claims to be a VT100 with AVO, but copies xterm #276's secondary response
4550 # - menu 8 (insert/delete char/line) has problem with delete-character
4551 # - like Windows Terminal, fails the ECH test: neither supports DECALN
4552 # However, the bce test with ECH works.
4553 # - does not support keypad application mode
4554 # - supports most xterm mode controls (except DEC Locator Events)
4555 # - REP, SL/SL do not work, but SD/SU work.
4556 # - the alternate-screen tests fail because it does not support DECALN
4557 # - window modify/report is not supported
4558 # - supports some VT320 presentation reports
4560 # - does not support blinking text
4561 # - implements most of the xterm modified keys, with some exceptions:
4562 # - pageup/pagedown do not send escapes
4563 # - alt cursor left/right send escape-b and escape-f
4564 # - sends UTF-8 like xterm for meta mode
4566 # - mouse mode is not reset by reset-sequence
4567 # - supports italics and dim, but not cross-out or double-underline
4568 # - color-palette cannot be changed
4569 vscode|xterm.js|Visual Studio Code terminal using xterm.js,
4571 kcbt=\E[Z, rmkx=\E[?1l, smkx=\E[?1h, use=xterm+256setaf,
4572 use=ecma+index, use=xterm+sm+1006, use=xterm+pcfkeys,
4573 use=ecma+italics, use=xterm-basic,
4574 vscode-direct|Visual Studio Code with direct-colors,
4575 use=xterm+indirect, use=vscode,
4577 ######## X TERMINAL EMULATORS
4580 # You can add the following line to your .Xdefaults to change the terminal type
4581 # set by the xterms you start up to my-xterm:
4583 # *termName: my-xterm
4585 # System administrators can change the default entry for xterm instances
4586 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4587 # case, xterm will detect and reject an invalid terminal type, falling back
4588 # to the default of xterm.
4591 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4592 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4593 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4594 # as these seem not to work -- esr)
4595 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4596 OTbs, am, km, mir, msgr, xenl, xon,
4597 cols#80, it#8, lines#65,
4598 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4599 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4600 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4601 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4602 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4603 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4604 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4605 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4606 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4607 smso=\E[7m, smul=\E[4m,
4608 # Compatible with the R5 xterm
4609 # (from the XFree86 3.2 distribution, <blink=@> removed)
4610 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4611 # corrected typos in rs2 string - TD
4613 xterm-r5|xterm R5 version,
4614 OTbs, am, km, msgr, xenl,
4615 cols#80, it#8, lines#24,
4616 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4617 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4618 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4619 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4620 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4621 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4622 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
4623 kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[31~, kel=\E[8~, kf0=\EOq,
4624 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4625 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~,
4626 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~,
4627 kil1=\E[30~, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM,
4628 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4629 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4631 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4633 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4634 smul=\E[4m, tbc=\E[3g, use=vt220+pcedit, use=vt100+enq,
4636 # Compatible with the R6 xterm
4637 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4638 # added khome/kend, hts based on the R6 xterm code - TD
4639 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4640 # for compatibility with other emulators).
4641 xterm-r6|xterm X11R6 version,
4642 OTbs, am, km, mir, msgr, xenl,
4643 cols#80, it#8, lines#24,
4644 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4645 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4646 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4647 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4648 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4649 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4650 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4652 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4653 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~,
4654 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4655 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4656 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4657 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4658 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, meml=\El, memu=\Em,
4659 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
4660 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4661 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4662 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4663 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4664 use=vt220+vtedit, use=xterm+kbs, use=vt100+enq,
4665 xterm-old|antique xterm version,
4667 # The monochrome version began as a copy of "xtermm" (from Solaris), and was
4668 # initially part of the xterm sources (in XFree86). But "xterm" continued to
4669 # grow, while "xterm-mono" had none of the newer features. Additionally,
4670 # inheriting from "xtermm" runs into several problems, including different
4671 # function keys as well as the fact that the mouse support is not compatible.
4672 # This entry restores the original intent, intentionally not an alias to
4673 # simplify maintenance -TD
4674 xterm-mono|monochrome xterm,
4676 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4677 # The name has been changed and some aliases have been removed.
4678 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4679 OTbs, am, bce, km, mir, msgr, xenl, XT,
4680 cols#80, it#8, lines#24, ncv@,
4681 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4682 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
4683 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4684 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4685 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4686 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4687 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4688 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4689 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4691 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4692 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4693 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4694 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4695 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4696 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4697 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4698 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
4699 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
4700 ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
4701 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4702 rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
4704 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4706 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4708 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4709 %;m%?%p9%t\016%e\017%;,
4710 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4711 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4712 tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
4713 use=ecma+color, use=vt220+cvis, use=vt220+keypad,
4715 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4716 # codes for F1-F4 except while in VT220 mode.
4717 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4718 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4720 # This version was released in XFree86 3.3.3 (November 1998).
4721 # Besides providing printer support, it exploits a new feature that allows
4722 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4723 # -- the distribution contained incorrect khome/kend values -TD
4724 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4725 blink=\E[5m, ich1@, invis=\E[8m,
4726 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4727 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4728 rs2=\E[!p\E[?3;4l\E[4l\E>,
4729 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4730 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4731 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4734 # This version was released in XFree86 4.0.
4735 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4737 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4738 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4739 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4740 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4741 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4742 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4743 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4744 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4745 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4746 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4747 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4748 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4749 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4750 kf48=\E[24;6~, khome=\EOH,
4751 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4753 use=xterm+alt1049, use=xterm-xf86-v333,
4755 # This version was released in XFree86 4.3.
4756 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4757 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4758 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4760 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4761 %p7%t;8%;m%?%p9%t\016%e\017%;,
4764 # Controlling the cursor-visibility is not a "new" feature, but was generally
4765 # neglected in terminal emulators until the mid-1990s. These would work for
4766 # the hardware terminals, or for more recent emulators, e.g., xterm.
4767 vt220+cvis|DECTCEM VT220 cursor-visibility,
4768 civis=\E[?25l, cnorm=\E[?25h,
4769 vt220+cvis8|8-bit variant,
4770 civis=\233?25l, cnorm=\233?25h,
4771 # The cvvis capability was unused in the SVr4 terminal descriptions for the
4772 # AT&T terminals, and there are no available documents as of 2021 which can
4773 # provide that it would have worked. The first block is used for those 1980s
4774 # terminals; the second is used for terminals whose behavior can be verified.
4775 att610+cvis0|ATT 610 cursor-visibility,
4776 civis=\E[?25l, cnorm=\E[?25h\E[?12l,
4777 att610+cvis|xterm cursor-visibility in XFree86 4.4,
4778 civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h,
4780 # This version was released in XFree86 4.4.
4781 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4782 use=att610+cvis, use=ecma+index, use=xterm-xf86-v43,
4784 xterm-xfree86|xterm terminal emulator (XFree86),
4787 xterm+nofkeys|building block for xterm fkey-variants,
4789 kcbt=\E[Z, kent=\EOM, nel=\EE, use=ecma+index,
4790 use=ansi+rep, use=ecma+strikeout, use=vt420+lrmm,
4791 use=xterm+sm+1006, use=xterm+tmux, use=ecma+italics,
4792 use=xterm+keypad, use=xterm-basic,
4794 # This version reflects the current xterm features.
4795 xterm-new|modern xterm terminal emulator,
4797 kcbt=\E[Z, kent=\EOM, nel=\EE, use=ecma+index,
4798 use=ansi+rep, use=ecma+strikeout, use=xterm+pcfkeys,
4801 # This fragment is for people who cannot agree on what the backspace key
4803 xterm+kbs|fragment for backspace key,
4806 # This fragment describes as much of XFree86 xterm's "pc-style" function
4807 # keys as will fit into terminfo's 60 function keys.
4810 # ---------------------------------
4817 # 8 Shift + Alt + Control
4818 # ---------------------------------
4819 # The meta key may also be used as a modifier in this scheme, adding another
4820 # bit to the parameter.
4821 xterm+pcfkeys|fragment for PC-style fkeys,
4822 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4825 xterm+noapp|fragment with cursor keys in normal mode,
4826 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4829 xterm+app|fragment with cursor keys in application mode,
4830 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4833 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4834 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4835 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4837 # The original assignments from patch #94 for cursor-keys had some technical
4840 # A parameter for a function-key to represent a modifier is just more
4841 # bits. But for a cursor-key it may change the behavior of the
4842 # application. For instance, emacs decodes the first parameter of a
4843 # cursor-key as a repeat count.
4845 # A parameterized string should (really) not begin with SS3 (\EO).
4846 # Rather, CSI (\E[) should be used.
4848 # For these reasons, the original assignments were deprecated. For
4849 # compatibility reasons, they are still available as a setting of xterm's
4850 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4851 # that might apply to xterm+pcfkeys with different values of that resource.
4853 # These entries will have warnings when checking with tic because the kri/kind
4854 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
4855 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
4856 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
4858 # * modify xterm-new terminfo entry to use capabilities for shifted
4859 # scroll forward/reverse as shifted cursor up/down.
4861 # In the 1980s when terminfo was defined, the developers made more of
4862 # a distinction between shifted up/down versus shifted left/right since most
4863 # terminals can index (scroll up/down), while few can scroll left/right.
4864 xterm+pcc3|fragment with modifyCursorKeys:3,
4865 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4866 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4867 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4868 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4869 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4870 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4871 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4872 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4875 xterm+pcc2|fragment with modifyCursorKeys:2,
4876 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4877 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4878 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4879 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4880 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4881 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4882 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4884 xterm+pcc1|fragment with modifyCursorKeys:1,
4885 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4886 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4887 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4888 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4889 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4890 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4892 xterm+pcc0|fragment with modifyCursorKeys:0,
4893 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4894 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4895 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4896 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4897 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4898 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4901 # Here are corresponding fragments from xterm patch #216:
4903 xterm+pcf0|fragment with modifyFunctionKeys:0,
4904 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4905 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4906 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4907 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4908 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4909 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4910 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4911 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4912 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4913 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4914 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4915 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4916 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4917 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4918 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4919 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4920 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4922 xterm+pcf2|fragment with modifyFunctionKeys:2,
4923 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4924 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4925 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4926 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4927 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4928 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4929 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4930 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4931 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4932 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4933 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4934 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4935 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4936 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4937 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4938 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4939 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4940 kf8=\E[19~, kf9=\E[20~,
4942 # Chunks from xterm #230:
4943 xterm+pce2|fragment with modifyCursorKeys:2,
4944 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4945 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4946 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4947 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4948 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4949 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4950 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4951 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4952 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4953 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4954 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4957 xterm+edit|fragment for 6-key editing-keypad,
4958 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4961 xterm+pc+edit|fragment for pc-style editing keypad,
4962 kend=\E[4~, khome=\E[1~,
4964 xterm+vt+edit|fragment for vt220-style editing keypad,
4965 kfnd=\E[1~, kslt=\E[4~,
4967 # These variations for alternate-screen and title-stacking were introduced by
4969 xterm+noalt|xterm without altscreen,
4972 xterm+alt1049|xterm 90 feature,
4973 rmcup=\E[?1049l, smcup=\E[?1049h,
4975 xterm+titlestack|xterm 251 feature,
4976 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
4978 xterm+alt+title|xterm 90 and 251 features combined,
4979 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
4981 # https://invisible-island.net/xterm/xterm.faq.html#xterm_keypad
4983 # Xterm's emulation of the VT100 numeric keypad on a PC-keyboard runs into the
4984 # problem that the keypad layout is different, and that the natural choice for
4985 # PF1 is NumLock (which happens to be reserved for other use). To work around
4986 # that, PF1-PF4 are emulated via F1-F4, which leaves the "/", "*" and "+" not
4987 # directly related to VT100.
4989 # With the VT220 keypad block that uses the 1-9 keys as suggested in
4990 # terminfo(5), the other keys can be handled with user-defined capabilities:
4992 # _______________________________________
4993 # | NumLock | / | * | - |
4994 # | | $Oo | $Oj | $OS |
4995 # |_________|__kpDIV__|__kpMUL__|__kpSUB__|
4997 # | $Ow | $Ox | $Oy | + |
4998 # |_ka1__K1_|_________|_ka3__K3_| $Ok |
4999 # | 4 | 5 | 6 | kpADD |
5000 # | $Ot | $Ou | $Ov | |
5001 # |_________|_kb2__K2_|_________|_________|
5003 # | $Oq | $Or | $Os | |
5004 # |_kc1__K4_|_________|_kc3__K5_| enter |
5007 # |___________________|_________|_kent_@8_|
5009 xterm+keypad|xterm emulating VT100/VT220 numeric keypad,
5010 kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo, kpDOT=\EOn,
5011 kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp, use=vt220+keypad,
5013 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
5014 # Alternatively, the same scheme with old-style function keys as in xterm-r6
5015 # is shown here (because that is used in mrxvt and mlterm):
5016 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
5017 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
5018 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
5019 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
5020 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
5021 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
5022 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
5023 kf63=\E[13;4~, use=xterm+pcf2,
5025 # This chunk is used for building the VT220/Sun/PC keyboard variants.
5026 xterm-basic|modern xterm terminal emulator - common,
5027 OTbs, am, bce, mir, msgr, xenl, AX, XT,
5028 colors#8, cols#80, it#8, lines#24, pairs#64,
5029 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5030 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
5031 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5032 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5033 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5034 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5035 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5036 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5037 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5038 ind=\n, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
5039 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
5040 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
5041 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5042 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
5044 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5046 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5048 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
5049 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
5050 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
5051 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5052 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
5053 use=xterm+alt+title, use=ansi+enq, use=att610+cvis,
5056 xterm+meta|meta mode for xterm,
5058 rmm=\E[?1034l, smm=\E[?1034h,
5060 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
5061 # In retrospect, something like xterm-r6 was intended here -TD
5062 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
5063 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
5067 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
5070 # If configured to support 88- or 256-colors (which is fairly common in 2009),
5071 # xterm also recognizes the control sequences for initc -TD
5072 xterm-16color|xterm with 16 colors like aixterm,
5074 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5075 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5076 use=xterm+osc104, use=ibm+16color, use=xterm-new,
5078 # 256-colors is a compile-time feature of XFree86 xterm beginning with
5079 # xterm patch #111 (1999/7/10) -TD
5080 xterm+256color|original xterm 256-color feature,
5082 colors#0x100, pairs#0x10000,
5083 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5084 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5086 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5088 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5092 # The semicolon separator used in xterm+256color does not follow the ECMA-48
5093 # standard. Since patch #282 (in 2012), xterm has supported both the legacy
5094 # subparameter separator (semicolon) and the standard (colon).
5096 # The xterm FAQ gives some of the history:
5097 # https://invisible-island.net/xterm/xterm.faq.html#color_by_number
5098 xterm+256color2|xterm 256-color feature,
5099 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48:
5101 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38:5
5105 # xterm OSC 104 resets the color palette. Using it as part of xterm+256color
5106 # has the drawback that some of the xterm-alikes which use that building block
5107 # require a different approach to rs1 -TD
5108 xterm+osc104|reset color palette,
5109 oc=\E]104\007, rs1=\Ec\E]104\007,
5111 # palette is hardcoded...
5112 xterm+256setaf|xterm 256-color (set-only),
5114 colors#0x100, pairs#0x10000,
5115 initc@, op=\E[39;49m,
5116 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5118 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5122 # 88-colors is a compile-time feature of XFree86 xterm beginning with
5123 # xterm patch #115 (1999/9/18) -TD
5125 # Note that the escape sequences used are the same as for 256-colors - xterm
5126 # has a different table of default color resource values. If built for
5127 # 256-colors, it can still handle an 88-color palette by using the initc
5130 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
5131 # which support the xterm+256color feature support the associated initc
5132 # capability. So it is cancelled in the entries which use this and/or the
5133 # xterm+256color block.
5135 # The default color palette for the 256- and 88-colors are different. A
5136 # given executable will have one palette (perhaps compiled-in). If the program
5137 # supports xterm's control sequence, it can be programmed using initc.
5138 xterm+88color|original xterm 88-color feature,
5139 colors#88, pairs#7744, use=xterm+256color,
5141 xterm+88color2|xterm 88-color feature,
5142 colors#88, pairs#7744, use=xterm+256color2,
5144 # These variants of XFree86 3.9.16 xterm are built as a configure option.
5145 xterm-256color|xterm with 256 colors,
5146 use=xterm+osc104, use=xterm+256color, use=xterm-new,
5147 xterm-88color|xterm with 88 colors,
5148 use=xterm+osc104, use=xterm+88color,
5151 # Emacs 26.1 and later support direct color mode in terminals, using a
5152 # combination of user-defined capabilities and ncurses-dependent function
5153 # calls. We will not include that here.
5155 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
5156 # is of interest only to the numerically illiterate), is compatible with other
5157 # terminal descriptions written for curses. It relies upon the extended range
5158 # for numeric capabilities provided in ncurses 6.1:
5159 xterm+direct2|xterm with direct-color indexing,
5161 colors#0x1000000, pairs#0x10000, CO#8,
5162 initc@, op=\E[39;49m,
5163 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2:%p1%{65536}%/%d:%p1%{256}
5164 %/%{255}%&%d:%p1%{255}%&%d%;m,
5165 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2:%p1%{65536}%/%d:%p1%{256}
5166 %/%{255}%&%d:%p1%{255}%&%d%;m,
5168 xterm-direct2|xterm with direct-color indexing (old),
5169 use=xterm+direct2, use=xterm+titlestack, use=xterm,
5171 # That in turn had a problem: in the original patch submitted for KDE konsole
5172 # in 2006, the submitter and the developer alike overlooked a "color space
5173 # identifier" parameter. This version provides for that parameter:
5174 xterm+direct|xterm with direct-color indexing,
5176 colors#0x1000000, pairs#0x10000, CO#8,
5177 initc@, op=\E[39;49m,
5178 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2::%p1%{65536}%/%d:%p1
5179 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5180 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2::%p1%{65536}%/%d:%p1
5181 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5183 xterm-direct|xterm with direct-color indexing,
5184 use=xterm+direct, use=xterm,
5186 # Here are corresponding flavors for terminals which could use the feature:
5187 iterm2-direct|iTerm2 with direct-color indexing,
5188 use=xterm+direct, use=iterm2,
5189 mlterm-direct|mlterm with direct-color indexing,
5190 use=xterm+direct, use=mlterm,
5192 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
5193 # that xterm's original implementation should have used colons for the
5194 # subparameter separators, but chose not to correct this in konsole. As of
5195 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
5196 xterm+indirect|xterm with direct-color indexing (old),
5198 colors#0x1000000, pairs#0x10000,
5199 initc@, op=\E[39;49m,
5200 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
5201 %/%{255}%&%d;%p1%{255}%&%d%;m,
5202 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
5203 %/%{255}%&%d;%p1%{255}%&%d%;m,
5205 konsole-direct|konsole with direct-color indexing,
5206 use=xterm+indirect, use=konsole,
5207 st-direct|st with direct-color indexing,
5208 use=xterm+indirect, use=st,
5209 vte-direct|vte with direct-color indexing,
5210 use=xterm+indirect, use=vte,
5211 # reportedly in Apple's Mohave (fall 2018), but untested -TD
5212 nsterm-direct|nsterm with direct-color indexing,
5213 use=xterm+indirect, use=nsterm,
5215 # As for others (commenting at the time of release for ncurses 6.1):
5216 # + Apple's Terminal.app does not recognize either form of the direct-color
5218 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
5219 # the colors. Like vte, it is a subset of xterm, although different
5220 # omissions/reservations of modified-keys are seen in testing.
5221 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
5222 # nothing useful with the colors.
5223 # + Teraterm 4.97, like PuTTY (no good).
5224 # + terminology 0.91 recognizes xterm's original implementation, but does
5225 # nothing useful with it.
5227 # Reviewing after ncurses 6.2:
5228 # + Apple's Terminal.app is unchanged, has no support for direct color:
5229 # Catalina 10.15.5 Terminal.app 2.10 (433)
5230 # Mohave 10.14.6 - Terminal.app 2.9.5 (421.2)
5231 # + Cygwin's mintty 3.1.7 works with colon/semicolon
5232 # + PuTTY 0.73 works with semicolon
5233 # + Teraterm 4.105 works with semicolon
5234 # + terminology 1.7.0 works with colon/semicolon.
5236 # Other variants are possible, e.g., by using more of xterm's indexed color
5237 # palette, though the intrusion of indexed colors on the direct-color space
5238 # would be more noticeable.
5240 xterm+direct16|xterm with direct-color indexing,
5242 setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%e48:2
5243 ::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d
5245 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%e38:2:
5246 :%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d%;
5248 setb@, setf@, use=xterm+direct,
5250 xterm-direct16|xterm with direct-colors and 16 indexed colors,
5251 use=xterm+direct16, use=xterm,
5253 xterm+direct256|xterm with direct-color indexing,
5255 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e%?
5256 %p1%{256}%<%t48;5;%p1%d%e48:2::%p1%{65536}%/%d:%p1
5257 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5258 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e%?
5259 %p1%{256}%<%t38;5;%p1%d%e38:2::%p1%{65536}%/%d:%p1
5260 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5261 setb@, setf@, use=xterm+direct,
5263 xterm-direct256|xterm with direct-colors and 256 indexed colors,
5264 use=xterm+direct256, use=xterm,
5268 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
5269 # asked for some of xterm's advanced features to be added to its terminfo
5270 # entry. It defines extended capabilities not found in standard terminfo or
5271 # termcap. These are useful in tmux, for instance, hence the name.
5273 # One caveat in adding extended capabilities in ncurses is that if the names
5274 # are longer than two characters, then they will not be visible through the
5275 # termcap interface.
5277 # Ms modifies the selection/clipboard. Its parameters are
5278 # p1 = the storage unit (clipboard, selection or cut buffer)
5279 # p2 = the base64-encoded clipboard content.
5281 # Ss is used to set the cursor style as described by the DECSCUSR
5282 # function to a block or underline.
5283 # Se resets the cursor style to the terminal power-on default.
5285 # Cs and Cr set and reset the cursor colour.
5286 xterm+tmux|advanced xterm features used in tmux,
5287 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
5288 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
5290 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
5291 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
5292 # To use it, your decTerminalID resource must be set to 200 or above.
5299 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
5300 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
5301 colors#8, cols#80, it#8, lines#24, pairs#64,
5302 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5303 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
5304 civis=\233?25l, clear=\233H\2332J,
5305 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
5306 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
5307 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
5308 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
5309 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
5310 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
5311 flash=\233?5h$<100/>\233?5l, home=\233H,
5312 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
5313 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
5314 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5316 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
5317 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
5318 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
5319 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
5320 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
5321 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
5322 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
5323 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
5324 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
5325 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
5326 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
5327 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
5328 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
5330 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5332 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
5333 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5334 %{6}%=%t3%e%p1%d%;m,
5335 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5336 %{6}%=%t3%e%p1%d%;m,
5337 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5338 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
5339 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
5340 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
5341 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
5342 u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
5343 vpa=\233%i%p1%dd, use=xterm+kbs,
5345 xterm-hp|xterm with hpterm function keys,
5346 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5347 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
5348 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
5349 knp=\ES, kpp=\ET, use=xterm+nofkeys,
5351 xterm-sco|xterm with SCO function keys,
5352 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5353 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
5354 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
5355 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
5356 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
5357 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
5358 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
5359 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
5360 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
5361 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
5362 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
5363 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
5366 # The xterm-new description has all of the features, but is not completely
5367 # compatible with vt220. If you are using a Sun or PC keyboard, set the
5368 # sunKeyboard resource to true:
5369 # + maps the editing keypad
5370 # + interprets control-function-key as a second array of keys, so a
5371 # 12-fkey keyboard can support vt220's 20-fkeys.
5372 # + maps numeric keypad "+" to ",".
5373 # + uses DEC-style control sequences for the application keypad.
5375 xterm-vt220|xterm emulating vt220,
5377 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5378 kend=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
5379 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5380 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5381 kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5382 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5383 kmous=\E[M, knp=\E[6~, kpp=\E[5~, nel=\EE, use=xterm+app,
5384 use=xterm+edit, use=vt220+keypad, use=ecma+italics,
5385 use=ecma+index, use=ansi+rep, use=ecma+strikeout,
5386 use=xterm+sm+1006, use=xterm+tmux, use=xterm+keypad,
5389 xterm-vt52|xterm emulating dec vt52,
5390 cols#80, it#8, lines#24,
5391 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5392 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
5393 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
5394 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5395 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
5396 use=xterm+kbs, use=vt52+keypad,
5398 xterm-noapp|xterm with cursor keys in normal mode,
5399 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
5402 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
5403 lines#24, use=xterm-old,
5405 # This is xterm for ncurses.
5406 xterm|xterm terminal emulator (X Window System),
5409 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
5410 # setting the vt100Graphics resource to false.
5411 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
5414 # These building-blocks allow access to the X titlebar and icon name as a
5415 # status line. There are a few problems in using them in entries:
5417 # a) tsl should have a parameter to denote the column on which to transfer to
5419 # b) the "0" code for xterm updates both icon-title and window title. Some
5420 # window managers such as twm (and possibly window managers descended from
5421 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
5422 # don't want to mess with icon-name when using those window managers.
5424 # The extension "TS" is preferable, because it does not accept a parameter.
5425 # However, if you are using a non-extended terminfo, "TS" is not visible.
5426 xterm+sl|access X title line and icon name,
5428 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
5429 xterm+sl-twm|access X title line (pacify twm-descended window managers),
5431 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
5433 # In contrast, this block can be used for a DEC vt320 and up. There are two
5436 # DECSASD (select active status display)
5437 # \E[0$} Main display
5438 # \E[1$} Status line
5440 # DECSSDT (select status line type)
5441 # \E[0$~ No status line
5442 # \E[1$~ Indicator status line
5443 # \E[2$~ Host-writable status line
5445 # The building block assumes that the terminal always shows something at the
5446 # status line (either the indicator, or status line). That is because if no
5447 # status line is used, then the terminal makes that line part of the user
5448 # window, changing its size without notice.
5450 # Because there is no "esl" (enable status line) capability, the "tsl"
5451 # capability ensures that the status line is host-writable. A DEC terminal
5452 # will clear the status line when changing from indicator to host-writable
5455 # Once on the status line, the row part of cursor addressing is ignored. Since
5456 # tsl expects a parameter (to specify the column), the shortest addressing that
5457 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
5459 dec+sl|DEC VTxx status line,
5461 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
5464 # The following xterm variants don't depend on your base version
5466 # xterm with bold instead of underline
5467 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
5468 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
5470 smso=\E[7m, smul=\E[1m, use=xterm-old,
5472 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
5473 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
5474 ich@, ich1@, use=xterm,
5475 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
5476 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
5477 rmcup@, smcup@, use=xterm,
5480 # The xterm mouse protocol is used by other terminal emulators.
5481 # In this section, two extended capabilities are used to illustrate the mouse
5482 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
5483 # enabling/disabling other mouse protocols. The "xm" capability describes the
5484 # mouse response; currently there is no interpreter which would use this
5485 # information to make the mouse support completely data-driven.
5487 # Here is the "original" xterm mouse protocol.
5489 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
5490 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
5491 # sequence", referring to the fact that it does not correspond to a "real"
5492 # terminal. The mouse responses for the X10 protocol are sent only for
5494 xterm+x10mouse|X10 xterm mouse protocol,
5495 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
5496 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
5497 xterm-x10mouse|X10 xterm mouse,
5498 use=xterm+x10mouse, use=xterm,
5500 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
5503 # The mouse responses for the X11 protocol covered button releases, as well as
5506 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
5509 # The modifiers are not reflected in this description because as used in xterm
5510 # they are normally inaccessible because the translations resources assign
5511 # shift and control to other features. However, they are important because
5512 # they take up space in the first byte of the response. The other bits of this
5513 # byte are used to encode the button number for both presses and releases.
5514 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
5515 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
5516 # provide additional features, e.g., wheel mouse.
5518 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
5519 # "t" or "T", which was activated by double-clicking. The "t" response was
5520 # used when the starting/ending positions were the same.
5522 # X11R3 (February 1988) added the highlight/tracking mode.
5524 # X11R4 (December 1989) added the control sequences document, listing the
5525 # control sequences for the X10/X11 protocols without descriptions. It also
5526 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
5527 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
5529 # X11R5 (November 1993) gave a description of the mouse protocol.
5531 # X11R6 (January 1995) moved the control sequences document out of the xterm
5532 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
5533 # no new information.
5534 xterm+x11mouse|X11 xterm mouse protocol,
5535 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
5536 xm=\E[M%?%p4%t%p3%e%{3}%;%'\s'%+%c%p2%'!'%+%c%p1%'!'%+%c,
5537 xterm-x11mouse|X11 mouse,
5538 use=xterm+x11mouse, use=xterm,
5540 # Here is a suggested description of the xterm highlighting protocol.
5541 # A more complicated example could be constructed to account for the "t"
5543 xterm+x11hilite|X11 xterm mouse protocol with highlight,
5544 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
5545 xm=\E[%p6%'!'%+%p5%'!'%+%c%p8%'!'%+%c%p7%'!'%+%c%p2%'!'%+%c
5547 xterm-x11hilite|X11 mouse with highlight,
5548 use=xterm+x11mouse, use=xterm,
5550 # The preceding were the sources from X Consortium. Other sources (or patches)
5551 # were available. Starting in mid-1995, XFree86 developers collected some of
5552 # those changes and began improvements, e.g., to support color. This was, by
5553 # the way, around the same time that rxvt developers began implementing color,
5554 # though dates (and attributions) are not well documented. I became interested
5555 # in xterm in late 1995, and involved in early 1996. To complete the picture,
5556 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
5558 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
5559 # "any-event" mouse mode.
5560 xterm+sm+1002|xterm any-event mouse,
5561 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
5562 xterm-1002|xterm any-event mouse,
5563 use=xterm+sm+1002, use=xterm,
5565 xterm+sm+1003|testing xterm-mouse,
5566 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
5568 xterm-1003|testing xterm-mouse,
5569 use=xterm+sm+1003, use=xterm,
5571 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5574 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5575 # dropping support for the X11 mouse protocol's shift-modifier and using
5576 # available bits in the first byte of the response to encode buttons 4 and 5.
5577 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5578 # older configurations which might have used the obsolete modifiers.
5580 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5581 # where the coordinates in the mouse response would be encoded in UTF-8,
5582 # thereby extending the range of coordinates past 222=(255-33). This is the
5583 # "1005" mouse mode.
5584 xterm+sm+1005|xterm UTF-8 mouse,
5585 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5586 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5587 xterm-1005|xterm UTF-8 mouse,
5588 use=xterm+sm+1005, use=xterm,
5590 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5591 # SGR-style parameters.
5593 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5594 # (By the way, this is a problem with the X11 protocol). A more plausible
5595 # criticism is that the responses provided by the 1005 mode are not distinct
5596 # from the non-1005 responses.
5598 # As an alternative (and fixing the longstanding limitation of X11 mouse
5599 # protocol regarding button-releases), I provided the 1006 mode, referring
5600 # to it as "SGR 1006" since the replies resemble the SGR control string:
5601 xterm+sm+1006|xterm SGR-mouse,
5602 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5603 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5604 xterm-1006|xterm SGR-mouse,
5605 use=xterm+sm+1006, use=xterm,
5608 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5609 # (kterm should not invoke DEC Graphics as the alternate character set
5610 # -- Kenji Rikitake)
5611 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5612 # -- MATSUMOTO Shoji)
5613 # kterm implements acsc via built-in table of X Drawable's
5614 kterm|kterm kanji terminal emulator (X window system),
5617 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
5618 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
5619 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
5620 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5622 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
5623 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
5624 kterm-color|kterm-co|kterm with ANSI colors,
5625 ncv@, use=kterm, use=ecma+color,
5629 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5630 # variant of xterm which is apparently no longer supported, but are interesting
5631 # because they illustrate SVr4 curses mouse controls - T.Dickey
5632 xtermm|xterm terminal emulator (monochrome),
5633 OTbs, am, km, mir, msgr, xenl,
5634 btns#3, cols#80, it#8, lines#24,
5635 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5636 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5637 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5638 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5639 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5640 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5641 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
5642 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
5643 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
5644 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
5645 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
5646 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
5647 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
5648 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
5649 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5650 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5651 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5652 %;m%?%p9%t\016%e\017%;,
5653 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
5654 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
5656 xtermc|xterm terminal emulator (color),
5657 colors#8, ncv#7, pairs#64,
5658 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5659 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5661 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5665 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
5666 # Here's a termcap entry I've been using for xterm_color, which comes
5667 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
5668 # color stuff, I also have a status line defined as the window manager
5669 # title bar. [I have translated it to terminfo -- ESR]
5670 xterm-pcolor|xterm with color used for highlights and status line,
5672 bold=\E[1;43m, rev=\E[7;34m,
5673 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
5674 %t;7;31%;%?%p3%t;7;34%;m,
5675 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
5677 # This describes the capabilities of color_xterm, an xterm variant from
5678 # before ECMA-64 color support was folded into the main-line xterm release.
5679 # This entry is straight from color_xterm's maintainer.
5680 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
5681 # The README's with the distribution also say that it supports SGR 21, 24, 25
5682 # and 27, but they are not present in the terminfo or termcap.
5683 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
5684 OTbs, am, km, mir, msgr, xenl, XT,
5685 cols#80, it#8, lines#65, ncv@,
5686 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5687 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5688 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5689 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5690 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5691 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5692 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
5693 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5694 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
5695 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
5696 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
5697 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5698 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
5699 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
5700 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
5701 rmso=\E[27m, rmul=\E[24m,
5702 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
5704 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5705 %;m%?%p9%t\016%e\017%;,
5706 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
5707 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
5708 smul=\E[4m, use=ecma+color, use=vt220+keypad,
5710 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
5711 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
5712 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
5713 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
5714 # that each of those implements the home, end, delete keys differently.
5716 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
5717 # colors; note that this is not compatible with the 5.2 version.
5718 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
5719 # match XFree86's xterm.terminfo usage and prevent circular links
5720 xterm-color|nxterm|generic color xterm,
5722 op=\E[m, use=xterm-r6, use=klone+color,
5724 # This entry describes an xterm with Sun-style function keys enabled
5725 # via the X resource setting "xterm*sunFunctionKeys:true"
5726 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
5727 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
5728 # because we want it to be seen as <kcpy>.
5729 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
5730 # with their Sun keyboard labels instead.
5731 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
5732 xterm-sun|xterm with sunFunctionKeys true,
5733 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
5734 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
5735 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
5736 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
5737 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
5738 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
5739 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
5740 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
5741 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
5742 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
5743 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
5744 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
5746 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
5747 cols#80, lines#24, use=xterm-sun,
5750 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
5751 gnome-rh62|Gnome terminal,
5753 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5756 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
5758 # This implements a subset of vt102 with a random selection of features from
5759 # other terminals such as color and function-keys.
5761 # shift-f1 to shift-f10 are f11 to f20
5763 # NumLock changes the application keypad to approximate vt100 keypad, except
5764 # that there is no escape sequence matching comma (,).
5766 # Other defects observed:
5767 # vt100 LNM mode is not implemented.
5768 # vt100 80/132 column mode is not implemented.
5769 # vt100 DECALN is not implemented.
5770 # vt100 DECSCNM mode is not implemented, so flash does not work.
5771 # vt100 TBC (tab reset) is not implemented.
5772 # xterm alternate screen controls do not restore cursor position properly
5773 # it hangs in tack after running function-keys test.
5774 gnome-rh72|GNOME Terminal,
5776 kdch1=\E[3~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5778 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
5780 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=vt220+cvis,
5783 # GNOME Terminal 2.0.1 (Redhat 8.0)
5785 # Documentation now claims it implements vt220 (which is demonstrably false).
5786 # However, it does implement ECH, which is a vt220 feature. And there are
5787 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
5788 # more of its bugs using vttest.
5790 # However, note that bce and msgr are broken in this release. Tabs (tbc and
5791 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
5793 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
5794 # operations. Shift-tab generates a distinct sequence so it can be argued
5795 # that it implements kcbt.
5796 gnome-rh80|GNOME Terminal,
5798 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
5799 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
5801 # GNOME Terminal 2.2.1 (Redhat 9.0)
5803 # bce and msgr are repaired.
5804 gnome-rh90|GNOME Terminal,
5806 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
5807 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
5808 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
5811 # GNOME Terminal 2.14.2 (Fedora Core 5)
5812 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
5813 gnome-fc5|GNOME Terminal,
5815 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
5817 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
5819 # GNOME Terminal 2.18.1 (2007 snapshot)
5821 # For any "recent" version of gnome-terminal, it is futile to attempt to
5822 # support modifiers on cursor- and keypad keys because the program usually
5823 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
5824 # of the keys (which more/less correspond to the termcap values), and will
5825 # interpret those according to the $TERM value, but others not in the
5826 # terminfo according to some constantly changing set of hacker guidelines -TD
5827 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
5828 use=xterm+pcc2, use=vt220+cvis, use=gnome-fc5,
5829 gnome-2007|GNOME Terminal snapshot 2.18.1,
5832 # GNOME Terminal 2.22.3 (2008 snapshot)
5834 # In vttest, it claims to be a vt220 with national replacement character-sets,
5835 # but aside from the identifier string, implements only a small fraction of
5836 # vt220's behavior, which will make it less usable on a VMS system (unclear
5837 # what the intent of the developer is, since the NRC feature exposed in vttest
5838 # by this change does not work).
5839 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
5840 use=vte+pcfkeys, use=vte-2007,
5841 gnome-2008|GNOME Terminal snapshot 2.22.3,
5844 # GNOME Terminal 3.6.0 (2012)
5845 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
5846 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
5849 # Testing with tack shows that flash does not/has not worked -TD
5850 vte-2012|VTE 0.34.1,
5852 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
5853 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
5854 %|%t;7%;m%?%p9%t\016%e\017%;,
5855 use=ecma+italics, use=vte-2008,
5856 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5857 # 61 differences from a correct entry for gnome terminal.
5858 gnome-2012|GNOME Terminal 3.6.0,
5861 # Before 2008, GNOME terminal could automatically use the contents of the
5862 # "xterm" terminfo to supply key information which is not built into the
5863 # program. With 2.22.3, this list was built into the program (which addressed
5864 # the inadvertent use of random terminfo data, though using a set of values
5865 # which did not correspond to any that xterm produced - still not solving the
5866 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
5868 # terminfo modifier code keys
5869 # kf13-kf24 shift 2 F1 to F12
5870 # kf25-kf36 control 5 F1 to F12
5871 # kf37-kf48 shift/control 6 F1 to F12
5872 # kf49-kf60 alt 3 F1 to F12
5873 # kf61-kf63 shift-alt 4 F1 to F3
5875 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5876 # no parameters. This appears to be rote copying based on xterm+pcc0.
5877 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5878 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5879 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5880 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5881 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5882 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5883 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5885 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5888 # deprecated - use "vte" for newer versions
5889 gnome|GNOME Terminal,
5891 gnome-256color|GNOME Terminal with xterm 256-colors,
5892 use=xterm+256color, use=gnome,
5894 # relevant changes were made in January 2014, and later.
5896 # Originally VTE was promoted as a library able to emulate any terminal by
5897 # reading its terminal description. In practice, that never got beyond the
5898 # ability to read definitions of special keys (function-, editing-, cursor).
5900 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
5901 # of a termcap file derived from xterm). That was incomplete because it did
5902 # not have any of the modifier-key information used for xterm's function-,
5903 # editing-, and cursor-keys. Having its own reader was unnecessary since
5904 # ncurses provides that information; used since xterm patch #225 in 2007.
5906 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
5907 # gnome #730137) dealt with attempts to recast that termcap reader as library
5908 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
5909 # abandoning that and finally constructing a table to match xterm's default
5910 # behavior, e.g., for "xterm+pcfkeys".
5911 vte-2014|VTE 0.35.1,
5913 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5914 ich=\E[%p1%d@, kent=\EOM, use=ecma+index,
5915 use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
5917 # As of January 2018, this was the most recent release,
5918 # e.g., with gnome-terminal 3.26.2
5919 vte-2017|VTE 0.50.2,
5920 use=ecma+strikeout, use=vte-2014,
5922 # VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY
5923 # late in 2017 for changing the appearance of underlines, which was
5924 # incorporated into Debian and Fedora testing-packages in February and March
5925 # 2018, respectively. Overline (Smol/Rmol) has been supported since December
5927 vte-2018|VTE 0.51.2,
5928 Rmol=\E[55m, Smol=\E[53m, Smulx=\E[4:%p1%dm,
5931 vte|VTE aka GNOME Terminal,
5934 vte-256color|VTE with xterm 256-colors,
5935 use=xterm+256color, use=vte,
5937 # XFCE Terminal 0.2.5.4beta2
5939 # This is based on some of the same source code, e.g., the VTE library, as
5940 # gnome-terminal, but has fewer features, fails more screens in vttest.
5941 # Since most of the terminfo-related behavior is due to the VTE library,
5942 # the terminfo is the same as gnome-terminal.
5950 # A terminal written in JavaScript, which can provide xterm-like terminal
5951 # emulation in a browser such as Google Chrome, or in Chome OS.
5953 # https://chromium.googlesource.com/apps/libapps/+/master/nassh/doc/FAQ.md
5955 # Tested with Secure Shell App version 0.39 in Chrome 89.0.4389.90, found that
5956 # the numeric keypad escapes are missing -TD
5957 hterm|Chromium hterm,
5960 kcbt=\E[Z, kent=\EOM, nel=\EE, use=xterm+osc104,
5961 use=ecma+index, use=ansi+rep, use=ecma+strikeout,
5962 use=vt420+lrmm, use=xterm+sm+1006, use=xterm+tmux,
5963 use=ecma+italics, use=xterm+pcfkeys, use=xterm-basic,
5964 hterm-256color|Chromium hterm with xterm 256-colors,
5965 use=xterm+256color2, use=hterm,
5969 # https://github.com/thestinger/termite
5971 # A review requires install of Arch Linux since Fedora and Debian don't have
5972 # this program. It uses "vte3-ng" (a conflicting package), which is here:
5973 # https://github.com/thestinger/vte-ng
5974 # which (based on the default branch setting) seems to be a fork of vte
5975 # 0.48.2, and is noted as such in Arch:
5976 # https://aur.archlinux.org/packages/vte3-ng/
5977 # It won't be merged:
5978 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
5979 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
5980 # but perhaps made obsolete.
5982 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
5983 # was mostly cut/paste from xterm-256color, but since VTE does not actually
5984 # implement several of the features in that terminal description, this one is
5985 # trimmed to eliminate those. Also, since it is a slightly older version of
5986 # VTE, it lacks a few more features (again, trimmed).
5987 termite|VTE-based terminal,
5988 am, ccc, km, mir, msgr, npc, xenl,
5989 cols#80, it#8, lines#24, ncv@,
5990 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
5992 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
5993 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5994 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5995 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5996 dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5997 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5998 ht=^I, hts=\EH, ind=\n, invis=\E[8m,
5999 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
6000 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6001 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
6002 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
6003 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6005 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
6006 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6007 use=xterm+alt1049, use=ecma+index, use=ansi+idc,
6008 use=ansi+idl, use=ansi+enq, use=ecma+italics,
6009 use=xterm+256color, use=ecma+color, use=vt220+cvis,
6010 use=xterm+pcfkeys, use=xterm+sl-twm,
6013 # Multi-Gnome-Terminal 1.6.2
6015 # This does not use VTE, and does have different behavior (compare xfce and
6017 mgt|Multi GNOME Terminal,
6018 use=ecma+index, use=xterm-xf86-v333,
6021 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
6022 # or not is debatable).
6025 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
6027 # Konsole 1.0.1 (2001/11/25)
6028 # (formerly known as kvt)
6030 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
6031 # simplify this entry (and point out why konsole isn't xterm), we base this on
6032 # xterm-r6. The default keyboard appears to be 'linux'.
6035 # a) konsole implements several features from XFree86 xterm, though none of
6036 # that is documented - except of course in its source code - apparently
6037 # because its implementors are unaccustomed to reading documentation - as
6038 # evidenced by the sparse and poorly edited documentation distributed with
6039 # konsole. Some features such as the 1049 private mode are recognized but
6040 # incorrectly implemented as a duplicate of the 47 private mode.
6041 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
6042 # sends PC-style escapes rather than vt100.
6043 # c) fails vttest menu 3 (Test of character sets) because it does not properly
6044 # parse some control sequences. Also fails vttest Primary Device Attributes
6045 # by sending a bogus code (in the source it says it's supposed to be a
6046 # vt220, which is doubly incorrect because it does not implement vt220
6047 # control sequences except for a few special cases). Treat it as a
6048 # mildly-broken vt102.
6050 # Update for konsole 1.3.2:
6051 # The 1049 private mode works (but see the other xterm screens in vttest).
6052 # Primary Device Attributes now returns the code for a vt100 with advanced
6053 # video option. Perhaps that's intended to be a "mildly-broken vt102".
6055 # Updated for konsole 1.6.4:
6056 # add konsole-solaris
6058 # Updated for konsole 1.6.6:
6059 # add control-key modifiers for function-keys, etc.
6061 # Updated for konsole 2.3 (October 2008):
6062 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
6063 # different from xterm (and vt100's). They have the same behavior in
6064 # this detail, but it is unclear which copies the other.
6066 # Deferred update for konsole 2.10 (late 2012):
6067 # add SGR 1006 mouse
6069 # Updated for konsole 2.12.4 (late 2013):
6072 # Updated for konsole 16.07 (mid 2016):
6073 # add dim, invis, strikeout
6074 # (also overline, which is too rarely used to provide as an extension)
6076 # Updated for konsole 17.12.0 (late 2017):
6078 # Re-enable "bel", since it is latent in the source-code even though KDE config
6079 # often hides the feature (2020/5/30)
6080 konsole-base|KDE console window,
6083 blink=\E[5m, dim=\E[2m, ech=\E[%p1%dX,
6084 flash=\E[?5h$<100/>\E[?5l, hpa=\E[%i%p1%dG,
6085 invis=\E[8m, kbs=^?, kdch1=\E[3~, kend=\E[4~, kf1@, kf10@,
6086 kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@,
6087 kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome=\E[1~,
6088 kslt@, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6089 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
6090 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6091 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6092 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
6093 use=ecma+index, use=xterm+sm+1006, use=ecma+strikeout,
6094 use=ecma+italics, use=ecma+color, use=xterm-r6,
6097 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
6098 # "vt100" key-table files along with a compiled-in default key-table.
6100 # The main difference between the two keytabs was that the developer equated
6101 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
6102 # that. For the same reason, the home/end keys differ. A VT100 had none of
6103 # that. The otherwise identical keytabs have definitions to model the VT52
6104 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
6106 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
6107 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
6108 # dropped from the install in June 2008.
6110 # The default keytab added in January 2000 was originally titled "X11 R6",
6111 # and likewise retitled to "XFree 4".
6113 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
6114 # and changing backspace to ^H, removing that keytab's attempt to model the
6115 # VT100 keypad and VT52 (KDE #20459).
6117 # The developers made changes to the default and linux keytabs. Comparing
6118 # the original and 2018 versions using diffstat:
6119 # default: 119 added, 147 deleted, 28 unchanged
6120 # linux: 47 added, 28 deleted, 104 unchanged
6122 # Most of the change for the default keytab was to make konsole act more like
6123 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
6124 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
6125 # made an external file (like "linux" and "solaris"), and some further
6126 # refinement made. But there are still flaws in the scheme.
6128 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
6129 # Shift into a placeholder in the table entries. That works well if all of the
6130 # modified keys are modified in the same way. But xterm does not do that. The
6131 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
6132 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
6133 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
6134 # kf14: '\E[1;2Q', '\EO2Q'.
6136 # In effect, a quarter of konsole's function-keys are different from xterm.
6138 # It is not a simple blunder:
6139 # a) xterm patch #121 (November 1999), providing the first version of the
6140 # PC-style modifiers would send \EO2Q
6141 # b) xterm patch #216 (July 2006) amended this and other details, provided
6142 # better documentation for the modifiers and made the behavior configurable,
6143 # e.g., using the modifyFunctionKeys resource. The reason why it sends
6144 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
6145 # changelog points this out as "avoid sending SS3 with parameters".
6146 # c) That came after AnyMod was introduced, but still early enough that one
6147 # might expect konsole's developers to followup. Twelve years later that
6148 # has yet to happen.
6150 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
6152 konsole-linux|KDE console window with linux keyboard,
6153 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
6154 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
6155 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6156 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
6157 konsole-solaris|KDE console window with Solaris keyboard,
6158 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6160 # Obsolete: x11r5.keymap
6161 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
6162 # terminfo at the time rather than testing the code.
6163 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
6164 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6166 # The value for kbs (see konsole-vt100) reflects local customization rather
6167 # than the settings used for XFree86 xterm.
6168 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
6169 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
6172 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
6173 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
6176 # Obsolete: vt100.keymap
6177 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
6178 # it is still useful for deriving the other entries, since the developer
6179 # provided function-keys based on xterm.
6180 konsole-vt100|KDE console window with vt100 (sic) keyboard,
6181 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
6182 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
6183 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
6184 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6185 khome=\E[H, use=konsole-base,
6187 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
6188 # September 2008 and removed in June 2016. The developer who removed it stated
6189 # that it was never installed.
6190 konsole-vt420pc|KDE console window with vt420 pc keyboard,
6191 kbs=^H, kdch1=^?, use=konsole-vt100,
6193 # make a default entry for konsole
6194 konsole|KDE console window,
6197 # These were written for ncurses:
6198 konsole-16color|klone of xterm-16color,
6199 ncv#32, use=ibm+16color, use=konsole,
6200 konsole-256color|KDE console window with xterm 256-colors,
6201 use=xterm+256setaf, use=konsole,
6204 # https://github.com/arakiken/mlterm
6206 mlterm|multi lingual terminal emulator,
6209 # Tested mlterm 3.9.0 (2020/09/19):
6211 # - has blinking text
6213 # - has invisible-text
6215 # - has crossed-out text
6216 # - does not support palette reset with OSC 104
6217 # - testing the function-keys is difficult because the terminal is
6218 # preconfigured to set many of the modified keys to special functions, e.g.,
6219 # - shift-F1 and shift-F2 are bound to a split-screen feature
6220 # - control-F1 and control-F2 is bound to a new-terminal feature
6222 # - primary response says it is a VT340 (ReGIS and Sixel).
6223 # - has partial support for double-size characters.
6224 # - character-set tests do not work.
6225 # - DEC locator works.
6226 # - 1006-mouse works.
6227 # - focus-events do not work reliably.
6228 # - numeric keypad escapes do not work.
6229 # - back-color erase works
6231 # - title-stack works.
6232 # - doesn't respond to 8-bit controls.
6233 # - 256-color palette initializing works.
6234 # - DECSTR soft-reset is documented.
6236 # Tested mlterm 3.3.8 (2018/01/21):
6237 # found xterm+sm+1006 did not work with version 3.3.8
6238 # soft-reset DECSTR is in sources since 2017/09/19.
6240 # Tested mlterm 3.2.2 (2014/03/22):
6241 # mlterm 3.x made further changes, but they were not reflected in the included
6242 # mlterm.ti (which was dropped in 2015). This entry has been based on testing
6243 # with ncurses, tack and vttest -TD
6244 mlterm3|multi lingual terminal emulator,
6246 blink=\E[5m, flash=\E[?5h$<100/>\E[?5l, invis=\E[8m,
6247 is2=\E[!p\E[?3;4l\E>, rs2=\E[!p\E[?3;4l\E>,
6248 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;%?
6249 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
6250 use=ansi+enq, use=ansi+rep, use=ecma+italics,
6251 use=ecma+strikeout, use=xterm+app, use=xterm+pcf2,
6252 use=xterm+pcc2, use=xterm+pce2, use=xterm+meta,
6253 use=xterm+alt+title, use=xterm+sm+1006,
6254 use=vt100+pfkeys, use=mlterm2,
6256 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
6258 # It is nominally a vt102 emulator, with features borrowed from rxvt and
6261 # The function keys are numbered based on shift/control/alt modifiers, except
6262 # that the control-modifier itself is used to spawn a new copy of mlterm (the
6263 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
6264 # how it is configured.
6266 # kf1 to kf12 \E[11~ to \E[24~
6267 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
6268 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
6269 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
6270 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
6271 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
6272 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
6273 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
6275 mlterm2|multi lingual terminal emulator,
6276 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
6277 colors#8, cols#80, it#8, lines#24, pairs#64,
6278 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6279 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
6280 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6281 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6282 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6283 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6284 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
6285 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6286 il=\E[%p1%dL, il1=\E[L, ind=\n,
6287 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
6288 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6289 kend=\EOF, kent=\EOM, khome=\EOH, kind=\EO1;2B, kmous=\E[M,
6290 kri=\EO1;2A, mc0=\E[i, nel=\EE, op=\E[39;49m, rc=\E8,
6291 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
6292 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6293 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
6294 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6295 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
6297 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
6298 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6299 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
6300 vpa=\E[%i%p1%dd, use=vt220+vtedit, use=xterm+alt1049,
6301 use=ecma+index, use=mlterm+pcfkeys, use=vt220+cvis,
6304 # The insert/delete/home/end keys do not respond to modifiers because mlterm
6305 # looks in its termcap to decide which string to send. If it used terminfo
6306 # (when available), it could use the extended names introduced for xterm.
6307 mlterm+pcfkeys|fragment for PC-style fkeys,
6308 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
6309 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
6310 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
6311 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
6312 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
6313 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
6314 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
6315 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
6316 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
6318 mlterm-256color|mlterm 3.0 with xterm 256-colors,
6319 use=xterm+256color, use=mlterm,
6322 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
6323 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
6326 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
6327 # but some applications don't work with that.
6328 # It also has an AIX extension
6332 # but the latter does not work correctly.
6334 # The distributed terminfo says it implements hpa and vpa, but they are not
6335 # implemented correctly, using relative rather than absolute positioning.
6337 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
6338 # Since rxvt is not really compatible with xterm, it should be configured as
6339 # "rxvt" or "rxvt-color".
6341 # removed dch/dch1 because they are inconsistent with bce/ech -TD
6342 # remove km as per tack test -TD
6343 rxvt-basic|rxvt terminal base (X Window System),
6344 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
6345 cols#80, it#8, lines#24,
6346 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6347 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6348 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6349 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6350 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6351 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6352 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
6353 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6354 ind=\n, is1=\E[?47l\E=\E[?1l,
6355 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6356 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6357 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
6359 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6360 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6362 s0ds=\E(B, s1ds=\E(0, sc=\E7,
6363 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
6365 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
6366 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
6367 use=rxvt+pcfkeys, use=vt220+cvis, use=vt220+keypad,
6368 # Key Codes from rxvt reference:
6370 # Note: Shift + F1-F10 generates F11-F20
6372 # For the keypad, use Shift to temporarily override Application-Keypad
6373 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
6374 # is off, escape sequences toggle Application-Keypad setting.
6375 # Also note that values of Home, End, Delete may have been compiled
6376 # differently on your system.
6378 # Normal Shift Control Ctrl+Shift
6379 # Tab ^I ESC [ Z ^I ESC [ Z
6380 # BackSpace ^H ^? ^? ^?
6381 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
6382 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
6383 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6384 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
6385 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
6386 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
6387 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
6388 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
6389 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6390 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
6391 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
6392 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
6393 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
6394 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
6395 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
6396 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
6397 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
6398 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
6399 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
6400 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
6401 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
6402 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
6403 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
6404 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
6405 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
6406 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
6407 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
6408 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
6409 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
6412 # Up ESC [ A ESC [ a ESC O a ESC O A
6413 # Down ESC [ B ESC [ b ESC O b ESC O B
6414 # Right ESC [ C ESC [ c ESC O c ESC O C
6415 # Left ESC [ D ESC [ d ESC O d ESC O D
6416 # KP_Enter ^M ESC O M
6417 # KP_F1 ESC O P ESC O P
6418 # KP_F2 ESC O Q ESC O Q
6419 # KP_F3 ESC O R ESC O R
6420 # KP_F4 ESC O S ESC O S
6421 # XK_KP_Multiply * ESC O j
6422 # XK_KP_Add + ESC O k
6423 # XK_KP_Separator , ESC O l
6424 # XK_KP_Subtract - ESC O m
6425 # XK_KP_Decimal . ESC O n
6426 # XK_KP_Divide / ESC O o
6438 # The source-code for rxvt actually defines mappings for F21-F35, using
6439 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
6440 # are rare, so this entry uses the shift- and control-modifiers as in
6441 # xterm+pcfkeys to define keys past F12.
6443 # kIC is normally not used, since rxvt performs a paste for that (shifted
6444 # insert), unless private mode 35 is set.
6446 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
6447 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
6448 rxvt+pcfkeys|fragment for PC-style fkeys,
6449 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6450 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
6451 kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
6452 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6453 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6454 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6455 kf21=\E[23$, kf22=\E[24$, kf23=\E[11\^, kf24=\E[12\^,
6456 kf25=\E[13\^, kf26=\E[14\^, kf27=\E[15\^, kf28=\E[17\^,
6457 kf29=\E[18\^, kf3=\E[13~, kf30=\E[19\^, kf31=\E[20\^,
6458 kf32=\E[21\^, kf33=\E[23\^, kf34=\E[24\^, kf35=\E[25\^,
6459 kf36=\E[26\^, kf37=\E[28\^, kf38=\E[29\^, kf39=\E[31\^,
6460 kf4=\E[14~, kf40=\E[32\^, kf41=\E[33\^, kf42=\E[34\^,
6461 kf43=\E[23@, kf44=\E[24@, kf5=\E[15~, kf6=\E[17~,
6462 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kind=\E[a,
6463 kri=\E[b, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
6464 kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
6465 kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
6466 kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
6467 kUP=\E[a, kUP5=\EOa, use=vt220+vtedit,
6469 # rxvt was originally "xvt", first announced in April 1993:
6470 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html
6471 #------------------------------------------------------------------------------
6472 # Article: 567 of comp.os.linux.announce
6473 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
6474 # caen!batcomputer!theory.TC.Cornell.EDU!mdw
6475 # From: nation@rocket.sanders.com (Robert Nation)
6476 # Newsgroups: comp.os.linux.announce
6477 # Subject: xvt upload
6478 # Date: 16 Apr 1993 18:13:07 GMT
6479 # Organization: Cornell Theory Center
6481 # Approved: linux-announce@tc.cornell.edu (Matt Welsh)
6482 # Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
6483 # NNTP-Posting-Host: theory.tc.cornell.edu
6484 # Keywords: xvt, xterm, Xwindows
6485 # Originator: mdw@theory.TC.Cornell.EDU
6487 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
6488 # rxvt.README on sunsite.unc.edu.
6490 # Xvt is an xterm replacement which uses a little less memory, and is
6491 # suitable for use on machines with small memories. Tek4010 support
6494 # Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
6495 # to make it a little more compact, and to add and remove certain features.
6499 # Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
6500 #------------------------------------------------------------------------------
6502 # Though its change-log does not mention this, John Davis has stated that he
6503 # was the author of the changes to use the bce ("new color model") which was
6504 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
6505 # dates, nor give developer's names. Initial color support was added for rxvt
6506 # "2.0", which was sometime in 1994.
6508 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
6509 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
6511 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
6512 # was from one of my bug-reports -TD
6514 # While the color model both for xterm and rxvt was based on Linux console,
6515 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
6516 # behavior: inserting/deleting characters does not fill the newly empty cell
6517 # with the default background color.
6518 rxvt|rxvt terminal emulator (X Window System),
6520 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
6521 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
6522 rxvt-color|rxvt terminal emulator (X Window System),
6524 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
6525 use=xterm+256color, use=rxvt,
6526 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
6527 use=xterm+88color, use=rxvt,
6528 rxvt-xpm|rxvt terminal emulator (X Window System),
6530 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
6531 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6532 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6533 \302x\263y\363z\362{\343|\330}\234~\376,
6535 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
6536 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6537 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6538 \302x\263y\363z\362{\343|\330~\376,
6541 # This variant is supposed to work with rxvt 2.7.7 when compiled with
6542 # NO_BRIGHTCOLOR defined. rxvt needs more work...
6543 rxvt-16color|rxvt with 16 colors like aixterm,
6544 ncv#32, use=ibm+16color, use=rxvt,
6549 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
6550 # makes its function-keys different from other flavors of rxvt -TD
6552 # Testing with tack:
6553 # + made custom description (below) to work, though it sets TERM=xterm.
6555 # Testing with vttest:
6556 # + While "based on" rxvt, some of the basic functionality is broken. The
6557 # window collapses to a single line when running several of the screens
6558 # in vttest, e.g., the tests for cursor movement, screen features,
6559 # double-sized characters.
6560 # + The vt52 test works properly, but this is an exception. Due to the
6561 # other bug(s) most of vttest is untestable.
6562 # + the color test using ECH shows a gap in the bce model, like rxvt.
6564 # Testing with xterm "vttest" scripts:
6565 # + resize.pl does not work because mrxvt does implement CSI 18 t
6566 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
6567 # + none of the "dynamic colors" (OSC colors) scripts work.
6568 mrxvt|multitabbed rxvt,
6570 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
6571 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
6572 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
6573 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
6574 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
6575 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
6578 mrxvt-256color|multitabbed rxvt with 256 colors,
6579 use=xterm+256color, use=mrxvt,
6582 # From: Michael Jennings <mej@valinux.com>
6586 # removed kf0 which conflicts with kf10 -TD
6587 # remove cvvis which conflicts with cnorm -TD
6588 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
6589 # but does otherwise follow the rxvt+pcfkeys model -TD
6590 # remove nonworking flash -TD
6591 # remove km as per tack test -TD
6592 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
6593 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
6594 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
6595 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6596 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6597 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6598 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6599 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6600 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6601 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
6602 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6603 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l,
6604 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
6605 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
6606 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
6607 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6608 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
6609 rmso=\E[27m, rmul=\E[24m,
6610 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6611 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6614 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6615 %;m%?%p9%t\016%e\017%;,
6616 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
6617 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6618 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
6619 use=ecma+color, use=vt220+cvis,
6621 Eterm-256color|Eterm with xterm 256-colors,
6622 use=xterm+256color, use=Eterm,
6624 Eterm-88color|Eterm with 88 colors,
6625 use=xterm+88color, use=Eterm,
6628 # Based on rxvt 2.4.8, it has a few differences in key bindings
6629 aterm|AfterStep terminal,
6631 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
6635 # This is not based on xterm's source...
6636 # vttest shows several problems with keyboard, cursor-movements.
6637 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
6638 xiterm|internationalized terminal emulator for X,
6640 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
6644 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
6645 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
6646 # chars look like --esr)
6647 hpterm|X-hpterm|hp X11 terminal emulator,
6648 am, da, db, mir, xhp, xon,
6649 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
6650 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
6651 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
6652 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6653 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
6654 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6655 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6656 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6657 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6658 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
6659 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6660 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6661 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6662 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6663 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
6665 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
6666 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6667 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
6668 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6670 # HPUX 11 provides a color version.
6671 hpterm-color|HP X11 terminal emulator with color,
6675 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
6676 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
6678 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90081_198611_Facilities_for_Series_200_300_and_500.pdf
6679 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1987/97089-90081_198709_Facilities_for_Series_200_300_and_500_HP-UX_Concepts_and_Tutorials.pdf
6681 # This article does not cover the HP 46020A keyboard that is used by the Model
6682 # 217 and 237 computers. For information on this keyboard read the article,
6683 # "The Series 300 ITE as System Console" found in the manual, HP-UX Concepts
6684 # and Tutorials, Vol. 7.
6687 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90042_198608_HP-UX_Concepts_and_Tutorials.pdf
6689 # HP300_Series_ITE.pdf
6691 # This version, which came from Martin Trusler, was tested with lynx using
6693 hpterm-color2|X-hpterm-color2|hp X11 terminal emulator with color,
6694 OTbs, am, ccc, da, db, km, mir, xhp,
6695 colors#8, cols#80, it#8, lh#2, lines#24, lm#0, lw#8, nlab#8,
6697 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
6698 u+v+w+x|y<z>{*|!}\273~\362,
6699 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
6700 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6701 dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6702 home=\E&a0y0C, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
6704 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
6705 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
6706 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
6707 %t1%e.%p7%d%;z%p1%dI,
6708 is1=\EH\EJ, kbs=^H, kctab=\E2, kcub1=\ED, kcud1=\EB,
6709 kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
6710 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
6711 kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES,
6712 kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3,
6714 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
6715 I\E&v1b1c6I\E&v1x1y7I,
6716 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6717 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6718 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6719 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6720 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
6721 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
6723 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%p5%{8}%*%+%{64}%+%c%?
6724 %p9%t%'\016'%c%e%'\017'%c%;,
6725 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
6726 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
6727 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6729 # This is for the extensible terminal emulator on the X11R6 contrib tape.
6730 # It corresponds to emu's internal emulation:
6732 # emu's default sets TERM to "xterm", but that doesn't work well -TD
6733 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
6734 # fixes: add civis, cnorm, sgr -TD
6735 emu|emu native mode,
6736 am, bce, mir, msgr, xon,
6737 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
6738 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
6739 \224t\225u\226v\227w\230x\231~\244,
6740 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
6741 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
6742 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
6743 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
6744 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
6745 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
6746 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
6747 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
6748 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
6749 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
6750 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
6751 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
6752 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
6753 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
6754 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
6755 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
6757 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
6759 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
6761 # vt220 Terminfo entry for the Emu emulation, corresponds to
6763 # with NumLock set (to make the keypad transmit kf0-kf9).
6764 # fixes: add am, xenl, corrected sgr0 -TD
6765 emu-220|Emu-220 (vt200-7bit mode),
6767 cols#80, it#8, lines#24, vt#200,
6768 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
6769 blink=\E[0;5m, bold=\E[0;1m, clear=\E[2J\E[H, cr=\r,
6770 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
6771 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
6772 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
6773 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
6774 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
6775 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
6776 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
6777 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6778 kcuu1=\E[A, kent=\EOM, kf0=\EOp, kf1=\EOq, kf10=\EOl,
6779 kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, kf15=\EOR,
6780 kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, kf28=\E[19~,
6781 kf29=\E[20~, kf3=\EOs, kf30=\E[21~, kf34=\E[26~,
6782 kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, kf4=\EOt,
6783 kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx,
6784 kf9=\EOy, khlp=\E[28~, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O,
6785 rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
6786 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
6787 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
6788 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6789 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
6790 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, use=vt220+vtedit,
6794 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
6795 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
6796 # indicate that it emulates more than one terminal, but incompletely.
6798 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
6799 # It is based on vt102's entry, with some subtle differences, but also
6801 # supports ANSI colors (except for 'op' string)
6802 # apparently implements alternate screen like xterm
6803 # does not use padding, of course.
6804 mvterm|vv100|SwitchTerm aka mvTERM,
6805 am, eslok, hs, km, mir, msgr, xenl, xon,
6806 colors#8, cols#80, it#8, lines#24, pairs#64,
6807 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6808 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6809 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6810 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6811 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6812 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6813 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
6814 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6815 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
6816 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
6817 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
6818 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6819 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
6821 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
6822 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6823 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6824 %;m%?%p9%t\016%e\017%;,
6825 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
6826 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6827 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
6831 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
6833 # "mterm -type ansi" sets $TERM to "ansi"
6834 mterm-ansi|ANSI emulation,
6837 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6838 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6839 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
6840 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6841 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6842 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
6843 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
6844 il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
6845 is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, ri=\E[T, rmacs=^O,
6846 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6847 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6848 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6849 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
6850 smul=\E[4m, vpa=\E[%i%p1%dd, use=ecma+index,
6851 # mterm normally sets $TERM to "mterm"
6852 mterm|mouse-sun|Der Mouse term,
6855 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
6856 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
6857 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
6858 rmir=^O, rmso=^T, smir=^Q, smso=^V,
6859 # "mterm -type decansi" sets $TERM to "decansi"
6861 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
6862 decansi|ANSI emulation with DEC compatibility hacks,
6863 am, mir, msgr, xenl,
6864 colors#8, it#8, pairs#64,
6865 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6866 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6867 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
6868 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6869 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6870 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6871 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
6872 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
6873 il1=\E[L, ind=\E[S, invis=\E[8m, is2=\E)0\E[r\017, kbs=^H,
6874 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~,
6875 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6876 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6877 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6878 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
6879 kf8=\E[19~, kf9=\E[20~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
6880 ri=\E[T, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
6881 rmso=\E[27m, rmul=\E[24m, sc=\E7, setab=\E[4%p1%dm,
6883 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6884 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6885 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6886 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
6887 u7=\E[6n, vpa=\E[%i%p1%dd, use=vt220+vtedit,
6888 use=ecma+index, use=vt220+cvis,
6891 # http://vwm.sourceforge.net/
6893 # VWM 2.0.2 (2009-05-01)
6894 # vwmterm is a terminal emulator written for the VWM console window manager.
6895 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
6897 am, bce, ccc, mir, msgr, npc, xenl, xon,
6899 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6900 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6901 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
6902 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6903 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m,
6904 ed=\E[J, el=\E[K, home=\E[H, il1=\E[L, ind=\n, invis=\E[8m,
6905 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6906 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
6907 kf11=\E[22~, kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
6908 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6909 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
6910 rmam=\E[?7l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
6912 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
6913 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6914 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smso=\E[3m,
6915 smul=\E[4m, use=vt220+cvis, use=xterm+alt1049,
6919 # MGR is a Bell Labs window system lighter-weight than X.
6920 # These entries describe MGR's xterm-equivalent.
6921 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
6924 mgr|Bellcore MGR (non X) window system terminal emulation,
6926 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
6927 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
6928 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
6929 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
6930 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
6931 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
6932 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6933 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
6934 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
6936 mgr-sun|Mgr window with Sun keyboard,
6937 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
6938 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
6939 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
6940 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
6941 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
6942 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
6943 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
6944 mgr-linux|Mgr window with Linux keyboard,
6945 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
6946 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
6947 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
6948 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6949 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
6954 st|stterm| simpleterm,
6959 # there is some problem turning off line-drawing
6960 # shift+control function-keys do nothing; shift+control cursor keys work
6961 # the padding tests make the terminal non-functional.
6964 # SL/SR/REP do not work
6965 # ECMA-48 cursor movement works, e.g., CHA, CBT, etc.
6967 # This entry discards the ccc/initc capabilities from st-0.7 because they
6968 # belong in st-256color.
6969 st-0.8|simpleterm 0.7,
6970 dim=\E[2m, kcbt@, kent@, oc=\E]104\007,
6971 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6972 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
6973 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
6974 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
6975 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
6976 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
6977 use=ecma+strikeout, use=st-0.6,
6980 # dim is intermittent, sometimes works, sometimes does not
6981 # italics may show up with yellow color
6982 # has control cursor-keys, alt cursor-keys, still no combinations
6983 # has control pageup/down
6984 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
6985 # Se and Ss are implemented in the source-code, but the terminfo
6986 # provided with the source is incorrect, since Se/Ss are mis-coded
6987 # as booleans rather than strings.
6988 st-0.7|simpleterm 0.7,
6991 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
6992 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
6993 kcbt@, kent@, oc=\E]104\007,
6994 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6995 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
6996 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
6997 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
6998 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
6999 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
7000 use=ecma+strikeout, use=st-0.6,
7004 # This version uses a table which supports a single modifier (a subset of
7005 # xterm's keys, using the same scheme). Because it supports only a single
7006 # modifier in this table, function keys f36-f48 are normally unavailable
7007 # because they are assigned to modifier-4.
7009 # The program assigns TERM to match the program name (the upstream source says
7010 # "st", but Debian renames it to "stterm").
7012 # The source includes two entries which are not useful here:
7013 # st-meta| simpleterm with meta key,
7014 # st-meta-256color| simpleterm with meta key and 256 colors,
7015 # because st's notion of "meta" does not correspond to the terminfo definition.
7016 # Rather, it acts like xterm - when the meta feature is disabled.
7019 # Added eo, removed ul -TD
7022 # implements control-modifier, but not control-shift for special keys
7023 # implements alt-modifier, but not alt-shift for special keys
7026 # http://git.suckless.org/st/log/st.info
7027 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
7028 # still has no function keys past kf36 (no combinations of modifiers)
7029 # no application keypad mode, e.g, kent.
7030 st-0.6|simpleterm 0.6,
7031 am, bce, hs, mir, msgr, npc, xenl, XT,
7032 colors#8, cols#80, it#8, lines#24, pairs#64,
7033 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
7035 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
7036 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7037 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7038 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7039 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
7040 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
7041 flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
7042 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7043 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
7044 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
7045 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
7046 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
7047 kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
7048 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7049 kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F, kent=\EOM,
7050 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7051 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
7052 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
7053 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
7054 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
7055 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
7056 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
7057 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
7058 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
7059 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
7060 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
7061 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
7062 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
7063 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
7064 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
7065 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
7066 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
7067 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kil1=\E[2;5~,
7068 kind=\E[1;2B, kmous=\E[M, kri=\E[1;2A, krmir=\E[2;2~,
7069 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, op=\E[39;49m, rc=\E8,
7070 rev=\E[7m, ri=\EM, rmacs=\E(B, rmir=\E[4l, rmkx=\E[?1l\E>,
7071 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l,
7072 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7073 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7075 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7077 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7078 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
7079 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=,
7080 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
7081 u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
7082 Ss=\E[%p1%d q, use=vt220+pcedit, use=ecma+index,
7083 use=xterm+alt1049, use=vt220+cvis, use=xterm+sl,
7088 # Note: the original terminfo description uses leading blank to persuade
7089 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
7092 # Reading the code shows it should work for aixterm 16-colors
7093 # - added st-16color
7096 # - set eo (erase-overstrike)
7098 # - tbc doesn't work
7100 # - cbt doesn't work
7101 # - shifted cursor-keys send sequences like rxvt
7102 # - sgr referred to unimplemented "invis" mode.
7103 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
7104 simpleterm|old-st| simpleterm 0.1.1,
7105 am, eo, mir, msgr, ul, xenl,
7106 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7107 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7108 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7109 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud=\E[%p1%dB, cud1=\n,
7110 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7111 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
7112 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG,
7113 ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^?,
7114 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7115 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
7116 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
7117 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7118 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
7119 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
7120 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7121 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7123 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
7124 use=vt220+cvis, use=ecma+index,
7125 st-16color|stterm-16color|simpleterm with 16-colors,
7126 use=ibm+16color, use=st,
7127 # Tested with st 0.8.2
7128 # The issue with the titlebar is fixed, though st is very slow.
7129 # In st 0.7, 256 colors "works", but when running xterm's test-scripts, some
7130 # garbage is shown in the titlebar.
7132 # terminal wants to use TERM=stterm-256color, but that is longer than 14
7133 # characters, making the choice nonportable.
7134 st-256color|stterm-256color|simpleterm with 256 colors,
7135 use=xterm+256color, use=st,
7138 # https://github.com/software-jessies-org/jessies/wiki/Terminator
7140 # Tested using the Debian package org.jessies.terminator 6.104.3256 on 64-bit
7141 # Debian/current -TD (2011/8/20)
7143 # There were some packaging problems:
7144 # a) using Java, the program starts off using 50Mb, and climbs from there,
7145 # up to 114Mb after testing (no scrollback).
7146 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
7147 # (two copies, just in case the host happens to be Mac OS X).
7148 # I deleted this after testing with tack.
7150 # Issues/features found with tack:
7151 # a) tbc does not work (implying that hts also is broken).
7152 # Comparing with the tabs utility shows a problem with the last tabstop on
7154 # b) has xterm-style shifted function-key strings
7155 # meta also is used, but control is ignored.
7156 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
7158 # d) some combinations of shift/control send xterm-style sequences for
7159 # insert/delete/home/end.
7160 # e) numeric keypad sends only numbers (compare with vttest).
7161 # f) meta mode (km) is not implemented.
7163 # Issues found with ncurses test-program:
7164 # a) bce is inconsistently implemented
7165 # b) widths of Unicode values above 256 do not always agree with wcwidth.
7167 # Checked with vttest, found low degree of compatibility there.
7169 # Checked with xterm's scripts, found that the 256-color palette is fixed.
7173 # b) corrected sgr0 to reset alternate character set
7174 # c) modified smacs/rmacs to use SCS rather than SI/SO
7178 # Revisiting in May 2019, the Debian package was no longer available, and a
7179 # developer-provided ".deb" does not work. However, a usable Windows ".msi"
7180 # (which relies upon Cygwin) can be tested. The developers provide a terminfo,
7181 # but some of the features it lists do not work reliably (bce, italics, invis).
7185 # invis attribute fails
7186 # key-definitions could be expanded, with some work:
7187 # + supports xterm-style cursor key-modifiers for shift
7188 # + supports xterm-style function key-modifiers for shift,control,alt
7189 # + supports xterm-style editing key-modifiers for shift,control,alt
7191 # ncurses test-program:
7192 # "C" menu shows that bce implementation is incomplete
7193 # italics did not work
7194 # dim worked once in tack, but not in ncurses test-program
7195 # "F" thick-line characters do not display
7197 # terminal does not respond to 80/132-column switching
7198 # wrapping at the right margin is erratic
7199 # there are several problems in the cursor-movements and screen-features
7200 # no vt52, no double-sized characters
7201 # Device attributes response says it is a vanilla VT100
7202 # does not respond to xterm mouse controls
7203 # alternate screen tests do not fill the screen, return wrong position
7204 # window modify/report operations do not work
7205 # miscellaneous ISO-6429 tests, e.g., REP, do not work
7206 # CBT, CHT, HPR, CNL,CPL, VPR do not work
7208 # removed the cancel for "hs", removed cbt, invis, corrected sgr -TD
7209 # use xterm+256setaf, etc -TD
7210 terminator|Terminator no line wrap,
7211 bce, eo, mir, msgr, xenl, xon,
7212 cols#80, it#8, lines#24, lm#0,
7213 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7214 bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7215 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7216 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7217 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7218 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7219 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
7220 flash=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7221 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
7222 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
7223 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
7224 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7225 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR,
7226 kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
7227 kf9=\E[20~, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
7228 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
7229 rs2=\E[!p\E[?3;4l\E[4l\E>, s0ds=\E(B, s1ds=\E(0, sc=\E7,
7230 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7
7231 %;m%?%p9%t\E(0%e\E(B%;,
7232 sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
7233 smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1, vpa=\E[%i%p1%dd,
7234 use=vt220+pcedit, use=ecma+italics, use=ecma+index,
7235 use=xterm+256setaf, use=xterm+sl-twm,
7236 use=xterm+alt1049, use=vt220+cvis,
7239 # https://www.enlightenment.org/about-terminology
7240 # https://github.com/borisfaure/terminology
7243 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
7244 # emulator, nor is it compatible with xterm, but it uses a few features from
7248 # cursor does not fill on focus
7249 # there are pervasive problems with clearing/erasing parts of the screen
7250 # resizing the window causes it to stop listening to the keyboard
7252 # doesn't understand vt100 CPR needed for resize
7257 # uses bce model for colors, but (see below) fails the vttest screens
7258 # has partial support for 256color feature.
7259 # tack function-keys (a subset of xterm+pcf0), and
7260 # tack cursor-keys (a subset of xterm+pce2):
7261 # ctrl+shift (ignored)
7263 # shift-alt modifier -> shift (2)
7267 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
7268 # ctrl + khome/kend works - none of the other modifiers do
7270 # spits lots of messages from termptyesc.c especially in vttest.
7271 # no 132-column mode
7272 # fails menu 1, 2 (definitely not vt100-compatible)
7273 # primary (claims vt420 with several options, apparently none work) and
7274 # secondary report says (perhaps... vt420): \E[>41;285;0c
7275 # CHA, HPR, VPA, CNL, CPL work
7276 # BCE with ED/EL - fail
7277 # BCE with ECH/indexing - fail
7279 # unlike teken, background light/dark works
7281 # X10 and Normal mouse work
7282 # Any-event mouse works
7283 # Mouse button-event works
7285 # This description uses xterm+pcf0, which is misleading because the program
7286 # does not handle combinations of modifiers - but listing them all would
7287 # involve more effort than its developers spent -TD
7288 terminology-0.6.1|EFL-based terminal emulator,
7290 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
7291 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7292 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7293 kind=\E[1;2B, kri=\E[1;2A,
7294 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
7295 %;m%?%p9%t\016%e\017%;$<2>,
7296 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
7297 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
7298 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
7299 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
7300 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
7301 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
7302 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
7303 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
7307 # Tested terminology 1.0.0
7310 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
7311 # and control+alt were added like xterm+pcc2
7312 # Editing keys have some features from xterm+pce2
7313 # Changed from xterm+pcf0 to xterm+pcf2
7318 # Aside from the partial fixes for function/cursor/editing keys, no improvement
7319 # in other tests versus 0.6.1
7320 terminology-1.0.0|EFL-based terminal emulator,
7321 dim=\E[2m, flash=\E[?5h$<100/>\E[?5l, kend=\E[OF,
7322 khome=\E[OH, rmacs=\E(B,
7323 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7324 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
7325 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
7326 use=vt220+cvis, use=xterm+x11mouse, use=xterm+pce2,
7327 use=xterm+pcf2, use=xterm+pcc2, use=terminology-0.6.1,
7330 # Tested terminology 1.8.1 using tack and vttest.
7332 # flash does not work
7333 # italics and crossed-out text work
7336 # DA1 says this is a VT420 with with 132 columns, NRCS, horizontal scrolling
7337 # DA2 says this is a VT510, version 33.7
7338 # NRCS does not work, program hangs in the locking shift test.
7339 # some of the VT420 rectangle operations work
7340 # left/right margins do not work
7341 # most of DECSCUSR works
7342 # most problems with bce are fixed.
7343 terminology-1.8.1|EFL-based terminal emulator,
7345 cvvis@, flash@, initc@, kcbt=\E[Z, rmm@, smm@, Ms@,
7346 use=ecma+index, use=xterm+256setaf, use=ansi+rep,
7347 use=ecma+strikeout, use=xterm+sm+1006,
7348 use=xterm+pcfkeys, use=xterm+tmux, use=vt220+cvis,
7349 use=ecma+italics, use=xterm-basic,
7351 terminology|EFL-based terminal emulator,
7352 use=terminology-1.8.1,
7354 ######## OPENGL CLIENTS
7357 # https://github.com/jwilm/alacritty
7358 # Version 0.6.0 (2020/11/25)
7359 # Version 0.4.0 (2019/11/25)
7360 # Version 0.3.3 (2019/08/03)
7361 # Version 0.2.1 (2018/10/03)
7362 # Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X
7363 # terminal programs) is not designed to run with a remote server.
7365 # Packaged in Arch Linux -
7367 # initial screensize 24x80
7368 # no DECCOLM (does not switch between 80/132 columns)
7369 # otherwise, passes wrapping test
7371 # identifies as a vt102
7372 # numeric keypad does not send expected codes (seen in 0.4.0)
7375 # ECH works in 0.3.3 (0.2.1 left text on right margin)
7379 # does not implement any of the DECRQM/DECRPM controls
7380 # does not implement any of the DECRQSS controls
7385 # fails CHT, otherwise ECMA-48 cursor movement ok
7386 # fails ERM/SPA, SL, SR, passes REP, SD, SU
7389 # has normal and highlight mouse
7390 # has any-event and button-event mouse
7391 # + does support SGR-mouse
7392 # + does not correctly support focus in/out events (seen in 0.4.0)
7393 # cursor-position wrong after alternate-screen (fixed in 0.4.0)
7394 # none of the dtterm controls work
7396 # bell and flash do not work
7397 # blink does not work
7398 # italics and crossed-out work (latter did not work in 0.2.1)
7399 # function-keys work up (tested combinations which window manager allows)
7400 # treats meta as escape-prefix
7402 # The program sources include "alacritty" and "alacritty-direct", which are
7403 # copied from "xterm-256color" and "xterm-direct" (but using semicolon for
7404 # subparameter delimiter). Refactored here to use ncurses building blocks -TD
7405 alacritty|alacritty terminal emulator,
7406 rs1=\Ec\E]104\007, use=xterm+256color,
7407 use=alacritty+common,
7409 alacritty-direct|alacritty with direct color indexing,
7410 use=xterm+indirect, use=alacritty+common,
7412 # cancel km, since it is not actually meta mode -TD
7413 # added ecma+strikeout in 0.3.3 -TD
7414 # added xterm+sl-twm in 0.3.3 -TD
7415 alacritty+common|base fragment for alacritty,
7417 kb2=\EOE, kbs=^?, kcbt=\E[Z, kent=\EOM, Se=\E[0 q,
7418 Smulx=\E[4:%p1%dm, use=ecma+index, use=xterm+sm+1006,
7419 use=xterm-basic, use=xterm+app, use=ansi+rep,
7420 use=xterm+tmux, use=ecma+strikeout, use=xterm+sl-twm,
7421 use=ecma+italics, use=xterm+pce2, use=xterm+pcc2,
7425 # https://github.com/kovidgoyal/kitty
7426 # Project started in 2016/10 (see alacritty), but is a Python script rather
7427 # than Rust, using OpenGL. The same caveats regarding remote connections
7428 # apply. This is not an X terminal, though (like alacritty), it copies
7429 # features from xterm.
7431 # Regarding the name "kitty", that is a pun, reflected in the description.
7433 # http://www.9bis.net/kitty/
7434 # https://github.com/kovidgoyal/kitty/issues/9
7435 # https://github.com/kovidgoyal/kitty/issues/1025
7437 # http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html
7438 # https://github.com/kovidgoyal/kitty/issues/879
7441 # changes since 0.13.3:
7444 # REP works, though using unspecified behavior
7446 # xterm's SGR-mouse mode is recognized.
7447 # does recognize original alternate-screen
7448 # bug: mouse focus in/out does not work.
7449 # bug: X10 mouse mode responds like any-event
7450 # bug: highlight-tracking does not work; terminal hangs.
7453 # rs1 adds an empty string for resetting title- and other OSC-strings.
7458 # initial screensize 71x22
7459 # does not respond to "resize -s"
7460 # resizing with window manager gives no clues
7462 # does not switch between 80/132 columns
7463 # fails wrapping test, copying vte/rxvt
7464 # no reverse-background, no blink
7465 # claims to be vt200:
7467 # secondary \E[>1;4000;12c
7469 # no GR in the locking-shifts screen
7470 # no NRCS or ISO-2022, anyway
7473 # has DECTCEM, ECH, but no SRM and DECSCA
7474 # has operating condition report, none of the others
7477 # DECRQSS ok for DECSTBM, SGR, none of the others
7480 # DECXCPR device status works, none of the others
7481 # no left/right margins
7482 # has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA
7483 # inside of DECCARA is uncolored
7484 # line-drawing with DECCARA does not work
7485 # aside from left/right margins, editing sequences look ok
7488 # fails ECH test for bce
7490 # fails REP, SL, SL, but other cursor-movement ok
7492 # does not recognize original alternate-screen
7493 # cursor-position wrong after alternate-screen
7494 # has normal mouse, any-event, any-button, but
7496 # no mouse-highlight tracking
7498 # dtterm - only supports report-size chars/pixels
7499 # recognizes tcap-query
7501 # flash doesn't work
7502 # italics do not work
7503 # bce should be set (but see vttest)
7504 #* developer's terminfo stopped at kf25, but the program continues,
7505 # copying xterm for the rest of the control+fkey sequence
7506 # (but only one modifier is supported, like iTerm2).
7507 #* it omitted shifted pageup/down
7508 #* control+editing keys work
7509 # In contrast to function-keys, some additional modifier combinations
7510 # act like xterm for the editing/cursor-keys, e.g., alt+shift. While
7511 # the implementation is incomplete, the building-blocks are consistent
7512 # with what has been implemented -TD
7513 # DECKPAM does not work -TD
7514 #* ka1, ka3, kc1, kc3 were bogus (removed)
7515 #* meta sends escape (removed kmm) -TD
7516 #* cvvis does not make cursor "more visible" -TD
7518 use=xterm+256color, use=kitty+common,
7519 kitty-direct|KovId's TTY using direct colors,
7520 oc=\E]104\007, use=xterm+direct2, use=kitty+common,
7521 kitty+common|KovId's TTY common properties,
7522 am, mc5i, mir, msgr, npc, xenl,
7523 cols#80, it#8, lines#24,
7524 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
7526 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
7527 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7528 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7529 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7530 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7531 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7532 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
7533 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7534 ind=\n, kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB,
7535 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kf1=\EOP,
7536 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P,
7537 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
7538 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
7539 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
7540 kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R,
7541 kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~,
7542 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
7543 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf4=\EOS,
7544 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7545 khome=\EOH, kich1=\E[2~, kind=\E[1;2B, knp=\E[6~,
7546 kpp=\E[5~, kri=\E[1;2A, op=\E[39;49m, rc=\E8, rev=\E[7m,
7547 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l,
7548 rmso=\E[27m, rmul=\E[24m, rs1=\E]\E\\\Ec, sc=\E7,
7549 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7551 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
7552 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7553 vpa=\E[%i%p1%dd, use=ansi+enq, use=ansi+rep,
7554 use=xterm+sm+1006, use=ecma+index, use=xterm+sl-twm,
7555 use=ecma+strikeout, use=xterm+pce2, use=xterm+pcc2,
7556 use=ecma+italics, use=xterm+alt1049, use=att610+cvis,
7559 ######## WEB CLIENTS
7562 # https://domterm.org
7564 # Quoting its webpage:
7565 # The domterm command runs a server that manages sessions (usually shell
7566 # processes). The user interface and terminal emulation is handled by a
7567 # JavaScript library that can run in a regular web browser or an embedded
7568 # browser such as Electron, using Web Sockets to talk to the server.
7570 # it can connect to, and display in, a web browser, or as a standalone Qt
7571 # application. Either way, it displays in the current desktop session.
7573 # Testing current code (2019/07/06) with Fedora 30:
7582 # bce screen shows diagonal lines...
7584 # kf11 toggles maximize
7585 # cursor-key application mode works
7586 # numeric keypad application does not work; keys always send face-codes
7587 # sends utf-8 for meta, like xterm
7589 # has problems with menu #1 (wrapping)
7590 # DA = vt200 with 132 columns, color
7591 # DA2 = 990, 100300 ("\E[>990;100300;0c")
7592 # no VT52, no double-size characters
7593 # vt220 ECH test works, SRM, DECSCA do not
7594 # S7C1T/S8C1t does not work
7595 # DECUDK does not work
7596 # CNL does not work; the other ECMA-48 cursor-movement tests work
7597 # REP sort-of works (does not match xterm)
7598 # SD/SU work, but not SL/SR
7599 # window reporting: works for size in chars/pixels, but not other tests
7600 # X10 mouse clicks work -- but return 4 rather than 1 for codes
7601 # any-event mouse mode acts like any-button mode
7602 # implements SGR mouse-mode
7604 # does not implement initc
7605 # does accept either colons or semicolon in 38/48 SGR.
7606 domterm|DomTerm web client,
7608 bel@, blink@, dim@, invis@, kcbt=\E[Z, ritm@, rmkx=\E[?1l,
7609 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7611 sitm@, smkx=\E[?1h, use=xterm+256setaf, use=ecma+index,
7612 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm-basic,
7614 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
7617 # Columbus UNIX virtual terminal. This terminal also appears in
7618 # UNIX 4.0 and successors as line discipline 1 (?), but is
7619 # undocumented and does not really work quite right.
7620 cbunix|cb unix virtual terminal,
7622 cols#80, lines#24, lm#0,
7623 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
7624 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
7625 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
7626 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
7627 smso=\Ea^D, smul=\Ea^A,
7628 # (vremote: removed obsolete ":nl@:" -- esr)
7629 vremote|virtual remote terminal,
7631 cols#79, use=cbunix,
7633 pty|4bsd pseudo teletype,
7634 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
7635 smso=\Ea$, smul=\Ea!, use=cbunix,
7639 # https://www.emacswiki.org/emacs/AnsiTerm
7640 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
7642 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
7643 eterm|gnu emacs term.el terminal emulation,
7646 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7647 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7648 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7649 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7650 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7651 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7652 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
7653 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
7654 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
7657 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
7658 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
7659 am, mir, msgr, xenl,
7660 colors#8, cols#80, lines#24, pairs#64,
7661 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7662 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7663 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7664 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7665 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7666 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7667 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
7668 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7669 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
7670 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7,
7671 setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
7672 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
7674 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
7675 u6=\E[%i%d;%dR, u7=\E[6n, use=vt220+pcedit,
7677 # shell.el can "do" color, though not nearly as well.
7680 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
7683 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
7684 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
7685 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
7687 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
7688 # frequently. The contemporaneous term.el aka ansi-term does not "support"
7689 # italics but does not lose the color information -TD 2017/01/28.
7690 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
7692 colors#8, it#8, ncv#13, pairs#64,
7693 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
7694 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7695 sgr0=\E[m, smul=\E[4m, use=ecma+italics,
7699 # Entries for use by the `screen' program by Juergen Weigert,
7700 # Michael Schroeder, Oliver Laumann. The screen and
7701 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
7702 # come from University of Wisconsin and may be older.
7703 # (screen: added <cnorm> on ANSI model -- esr)
7705 # 'screen' defines extensions to termcap. Some are used in its terminal
7707 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
7708 # AX (bool) Does understand ANSI set default fg/bg color
7709 # (\E[39m / \E[49m).
7710 # S0 (str) Switch charset 'G0' to the specified charset.
7711 # E0 (str) Switch charset 'G0' back to standard charset.
7713 # Initially tested with screen 3.09.08
7715 # According to its manual page
7717 # Screen is a full-screen window manager that multiplexes a physical
7718 # terminal between several processes (typically interactive shells). Each
7719 # virtual terminal provides the functions of a DEC VT100 terminal and, in
7720 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
7721 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
7722 # multiple character sets).
7724 # However, there is a design error in its support for video highlights. The
7725 # program uses a table (rendlist) which equates the SGR codes to terminal
7726 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
7727 # is modified only by the presence or absence of the corresponding capabilities.
7728 # Not by their values.
7730 # If screen sets the TERMCAP variable, it uses hardcoded strings which
7731 # correspond to the rendlist table.
7733 # The table gives this information:
7745 # 22 reset bold, standout and dim
7747 # 24 reset underline
7752 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
7753 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
7754 # Without some redesign of screen, it is not possible to extend the set of
7755 # capabilities. Substitution would be possible, e.g., sending italics in
7756 # place of underline.
7758 # Because screen uses hard-coded parsing, it does not check if two capabilities
7759 # use the same value. For example, changing standout to be the same as any of
7760 # the other capabilities will confuse screen. Curses applications which use
7761 # sgr are not impacted (because that usually resets all capabilities before
7762 # setting any), but termcap applications do not use sgr -TD
7764 # The "screen" entry should use ecma+index rather than just indn, but tmux
7765 # defaults to using "screen". For background, screen supported ecma+index
7766 # since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by
7767 # the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or
7768 # terminfo entries (which list about 60% of the control sequences).
7769 screen|VT 100/ANSI X3.64 virtual terminal,
7770 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
7771 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
7772 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
7774 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
7775 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
7776 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7777 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7778 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
7779 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
7780 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7781 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
7782 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7783 ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
7784 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
7785 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR,
7786 kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
7787 kf9=\E[20~, kmous=\E[M, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
7788 rmacs=^O, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
7789 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
7790 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
7791 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
7792 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
7793 smso=\E[3m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
7794 E0=\E(B, S0=\E(%p1%c, use=vt220+pcedit,
7795 use=xterm+alt1049, use=ecma+color, use=vt100+enq,
7796 # The bce and status-line entries are from screen 3.9.13 (and require some
7797 # changes to .screenrc).
7798 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
7801 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
7802 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen4,
7804 # ======================================================================
7805 # Entries for GNU Screen with 16 colors.
7806 # Those variations permit to benefit from 16 colors palette, and from
7807 # bold font and blink attribute separated from bright colors. But they
7808 # are less portable than the generic "screen" 8 color entries: Their
7809 # usage makes real sense only if the terminals you attach and reattach
7810 # do all support 16 color palette.
7812 screen-16color|GNU Screen with 16 colors,
7813 use=ibm+16color, use=screen4,
7815 screen-16color-s|GNU Screen with 16 colors and status line,
7816 use=ibm+16color, use=screen-s,
7818 screen-16color-bce|GNU Screen with 16 colors and BCE,
7819 use=ibm+16color, use=screen-bce,
7821 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
7822 bce, use=ibm+16color, use=screen-s,
7824 # ======================================================================
7825 # Entries for GNU Screen 4.02 with --enable-colors256.
7827 screen-256color|GNU Screen with 256 colors,
7828 use=xterm+256setaf, use=screen4,
7830 screen-256color-s|GNU Screen with 256 colors and status line,
7831 use=xterm+256setaf, use=screen-s,
7833 screen-256color-bce|GNU Screen with 256 colors and BCE,
7834 bce, use=xterm+256setaf, use=screen-bce,
7836 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
7837 bce, use=xterm+256setaf, use=screen-s,
7839 screen.xterm-256color|GNU Screen with xterm using 256 colors,
7840 use=xterm+256setaf, use=screen.xterm-new,
7842 screen.konsole-256color|GNU Screen with konsole using 256 colors,
7843 use=xterm+256setaf, use=screen.konsole,
7845 screen.vte-256color|GNU Screen with vte using 256 colors,
7846 use=xterm+256setaf, use=screen.vte,
7848 screen.putty-256color|GNU Screen with putty using 256 colors,
7849 use=xterm+256setaf, use=screen.putty,
7851 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
7852 use=xterm+256setaf, use=screen.mlterm,
7854 # ======================================================================
7856 # Read the fine manpage:
7857 # When screen tries to figure out a terminal name for
7858 # itself, it first looks for an entry named "screen.<term>",
7859 # where <term> is the contents of your $TERM variable. If
7860 # no such entry exists, screen tries "screen" (or "screen-w"
7861 # if the terminal is wide (132 cols or more)). If even this
7862 # entry cannot be found, "vt100" is used as a substitute.
7864 # Notwithstanding the manpage, screen uses its own notion of the termcap
7865 # and some keys from "screen.<term>" are ignored. Here is an entry which
7866 # covers those (tested with screen 4.00.02) -TD
7867 screen+fkeys|function-keys according to screen,
7868 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
7871 # See explanation before "screen" entry. Cancel italics so that applications
7872 # do not assume screen supports the feature. Add this tweak to entries which
7873 # extend screen for terminals which do support italics.
7874 screen+italics|screen cannot support italics,
7877 # Here are a few customized entries which are useful -TD
7880 # (a) screen does not support invis.
7881 # (b) screen's implementation of bw is incorrect according to tack.
7882 # (c) screen appears to hardcode the strings for khome/kend, making it
7883 # necessary to override the "use=" clause's values (screen+fkeys).
7884 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
7885 # which is NOT the same as the terminfo screen.<term>.
7886 # (e) when screen finds one of these customized entries, it sets $TERM to
7887 # match. Hence, no "screen.xterm" entry is provided, since that would
7888 # create heartburn for people running remote xterm's.
7889 # (f) screen does not support rep.
7891 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
7892 # since the default translations override the built-in keycode
7893 # translation. They are suppressed here to show what is tested by tack.
7894 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
7896 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
7897 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7898 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
7899 E3@, use=screen+italics, use=screen+fkeys,
7900 use=xterm+x11mouse, use=xterm-new,
7901 #:screen.xterm|screen for modern xterm,
7902 #: use=screen.xterm-new,
7903 # xterm-r6 does not really support khome/kend unless it is propped up by
7904 # the translations resource.
7905 screen.xterm-r6|screen customized for X11R6 xterm,
7906 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
7907 # Color applications running in screen and TeraTerm do not play well together
7908 # on Solaris because Sun's curses implementation gets confused.
7909 screen.teraterm|disable ncv in teraterm,
7911 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7912 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7913 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7914 use=screen+fkeys, use=xterm+x11mouse, use=screen4,
7916 screen.rxvt|screen in rxvt,
7918 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7919 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
7920 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
7922 screen.Eterm|screen in Eterm,
7923 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
7924 screen.mrxvt|screen in mrxvt,
7925 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
7926 screen.vte|screen in any VTE-based terminal,
7927 use=xterm+x11mouse, use=screen+italics,
7928 use=screen+fkeys, use=vte,
7929 screen.gnome|screen in GNOME Terminal,
7930 use=xterm+x11mouse, use=screen+italics,
7931 use=screen+fkeys, use=gnome,
7932 screen.konsole|screen in KDE console window,
7933 use=xterm+x11mouse, use=screen+italics,
7934 use=screen+fkeys, use=konsole,
7935 # fix the backspace key
7936 screen.linux|screen.linux-s|screen in linux console,
7938 kbs=^?, kcbt@, use=linux+sfkeys, use=xterm+x11mouse,
7939 use=screen+fkeys, use=screen4,
7940 screen.mlterm|screen in mlterm,
7941 use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
7942 screen.putty|screen in putty,
7943 use=xterm+x11mouse, use=screen+fkeys, use=putty,
7945 # The default "screen" entry is reasonably portable, but not optimal for the
7946 # most widely-used terminal emulators. The "bce" capability is supported in
7947 # screen since 3.9.13, and when used, will require fewer characters to be sent
7948 # to the terminal for updates.
7950 # If you are using only terminals which support bce, then you can use this
7951 # feature in your screen configuration.
7953 # Adding these lines to your ".screenrc" file will allow using these customized
7958 screen-bce.xterm-new|screen optimized for modern xterm,
7960 ech@, use=screen+italics, use=screen.xterm-new,
7961 screen-bce.rxvt|screen optimized for rxvt,
7963 ech@, use=screen.rxvt,
7964 screen-bce.Eterm|screen optimized for Eterm,
7966 ech@, use=screen.Eterm,
7967 screen-bce.mrxvt|screen optimized for mrxvt,
7969 ech@, use=screen.mrxvt,
7970 screen-bce.gnome|screen optimized for GNOME-Terminal,
7972 ech@, use=screen+italics, use=screen.gnome,
7973 screen-bce.konsole|screen optimized for KDE console window,
7975 ech@, use=screen+italics, use=screen.konsole,
7976 screen-bce.linux|screen optimized for linux console,
7978 ech@, use=screen.linux,
7980 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
7981 cols#132, use=screen4,
7983 screen2|old VT 100/ANSI X3.64 virtual terminal,
7984 cols#80, it#8, lines#24,
7985 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
7986 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7987 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7988 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7989 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
7990 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7991 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
7992 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
7993 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
7994 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
7995 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
7996 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
7997 screen3|older VT 100/ANSI X3.64 virtual terminal,
7999 cols#80, it#8, lines#24,
8000 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
8001 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8002 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8003 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8004 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8005 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
8006 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
8007 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
8008 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
8009 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
8010 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
8011 smul=\E[4m, tbc=\E[3g,
8013 # screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file
8014 # was last updated in 2009 to include 256-color support. The most recent
8015 # release is 4.6.2 (October 2017).
8016 screen4|VT 100/ANSI X3.64 virtual terminal,
8017 use=ecma+index, use=screen,
8019 # As of March 2019, screen 5.0 has not been released.
8023 # https://savannah.gnu.org/bugs/?36676
8025 # mentions a change to implement italics which should be in a version 5,
8026 # (implemented 2016-11-05, but merged 2017-07-09). That does away with the
8027 # longstanding use of SGR 3 for standout, and interprets it as italics.
8029 # The same development branch has some support for direct-colors, but none
8030 # of this has been documented.
8031 screen5|VT 100/ANSI X3.64 virtual terminal (someday),
8033 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8034 %p5%t;2%;m%?%p9%t\016%e\017%;,
8035 smso=\E[7m, use=ecma+italics, use=screen4,
8039 # tmux is mostly compatible with screen, but has support for italics, and some
8040 # of the xterm cursor bits.
8042 # However, unlike screen, tmux has no provision for using derived terminal
8043 # descriptions. When screen starts, it looks for a suitable "inner" terminal
8044 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
8045 # various entries such as screen.xterm-new provide a way to more closely
8046 # match the terminal.
8047 tmux|tmux terminal multiplexer,
8048 invis=\E[8m, kbs=^?, rmso=\E[27m,
8049 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8050 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8051 smso=\E[7m, E3=\E[3J, Smulx=\E[4:%p1%dm,
8052 use=ecma+italics, use=ecma+strikeout, use=xterm+edit,
8053 use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux,
8056 tmux-256color|tmux with 256 colors,
8057 use=xterm+256setaf, use=tmux,
8059 tmux-direct|tmux with direct-color indexing,
8060 setal=\E[%?%p1%{8}%<%t5%p1%d%e58:2::%p1%{65536}%/%d:%p1
8061 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
8062 use=xterm+direct, use=tmux,
8067 # http://www.brain-dump.org/projects/dvtm/
8069 # + This uses ncurses to manage the display, including support for italics and
8071 # + However, default-colors are incomplete: do not set bce.
8072 # + It does not implement flash (since no \e[?5h)
8073 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
8074 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
8075 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
8076 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
8078 # + It also omits the shifted cursor- and editing-keypad keys.
8079 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
8080 # (and passes those through without interpretation)
8081 # and may simply pass-through rxvt's, making it appear to work.
8082 # In other cases such as kf23 and up, no pass-through is done.
8083 # + Most of the mode-settings in the initialization/reset strings are not
8084 # implemented; dvtm copies its description from rxvt.
8085 dvtm|dynamic virtual terminal manager,
8086 am, eo, mir, msgr, xenl, AX,
8087 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
8088 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8089 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8090 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8091 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8092 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8093 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8094 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
8095 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8096 is1=\E[?47l\E=\E[?1l,
8097 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
8098 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
8099 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
8100 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
8101 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~,
8102 kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
8103 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8104 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8105 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[23$,
8106 kf22=\E[24$, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
8107 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8108 khome=\E[7~, kind=\E[a, kmous=\E[M, kri=\E[b, op=\E[39;49m,
8109 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
8110 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8111 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
8112 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
8114 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
8116 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
8118 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
8119 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
8120 use=vt220+vtedit, use=vt220+cvis, use=ecma+italics,
8122 dvtm-256color|dynamic virtual terminal manager with 256 colors,
8123 colors#0x100, pairs#0x10000,
8124 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
8126 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
8132 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
8133 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
8134 # been maintained until recently by the National Center for Supercomputer
8135 # Applications, and it is feature rich, stable and free. It can be downloaded
8136 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
8137 # xterm+sl, and the docs at NCSA. It works well.
8139 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
8140 # The terminal options should be set as follows:
8141 # Xterm sequences ON
8142 # use VT wrap mode ON
8143 # use Emacs arrow keys OFF
8144 # CTRL-COMND is Emacs meta ON
8146 # answerback string: "ncsa-vt220-8"
8147 # setup keys: all disabled
8149 # Application mode is not used.
8151 # Other special mappings:
8158 # PAGEDOWN Next Screen
8160 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
8163 # The status-line manipulation is a mapping of the xterm-compatible control
8164 # sequences for setting the window-title. So you must use tsl and fsl in
8165 # pairs, since the latter ends the string that is loaded to the window-title.
8166 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
8167 am, km, mir, msgr, xenl,
8168 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8169 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8170 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8171 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8172 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8173 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8174 el=\E[K, el1=\E[1K, enacs=\E)0,
8175 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
8176 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
8177 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
8178 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
8179 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8180 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
8181 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
8182 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
8183 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
8184 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
8185 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
8186 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
8187 rmso=\E[27m, rmul=\E[24m,
8188 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
8189 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
8191 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
8192 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8193 u8=\E[?62;1;6c, use=vt220+cvis, use=xterm+sl,
8195 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
8196 use=ncsa-m, use=klone+color,
8197 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
8199 dsl@, fsl@, tsl@, use=ncsa,
8200 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
8202 dsl@, fsl@, tsl@, use=ncsa-m,
8204 # The documented function-key mapping refers to the Apple Extended Keyboard
8205 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
8206 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
8207 # some keyboards and many applications require these as F1-F4.
8209 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
8210 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8211 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8212 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
8213 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
8214 kf8=\E[19~, kf9=\E[20~, use=ncsa,
8216 #### Pilot Pro Palm-Top
8218 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
8219 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
8220 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
8223 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
8224 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
8225 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
8228 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
8229 # These entries are for the Embeddable Linux Kernel System (ELKS)
8230 # project - an heavily stripped down Linux to be run on 16 bit
8231 # boxes or, eventually, to be used in embedded systems - and have been
8232 # adapted from the stock ELKS termcap. The project itself looks stalled,
8233 # and the latest improvements I know of date back to March 2000.
8235 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
8236 # as an added bonus, this deals with all the capabilities common to
8237 # both VT52 and ANSI (or, eventually, "special") modes.
8239 elks-glasstty|ELKS glass-TTY capabilities,
8241 cols#80, it#8, lines#25,
8242 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
8245 elks-vt52|ELKS vt52 console,
8246 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8247 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
8248 home=\EH, use=elks-glasstty,
8250 elks-ansi|ELKS ANSI console,
8251 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8252 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8253 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
8255 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
8256 # instead of VT52, but the "elks" entry still refers to the latter.
8258 elks|default ELKS console,
8261 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
8262 # one but in screen size
8264 sibo|ELKS SIBO console,
8265 cols#61, it#8, lines#20, use=elks-vt52,
8267 ######## COMMERCIAL WORKSTATION CONSOLES
8273 # This is from the OSF/1 Release 1.0 termcap file
8274 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
8277 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8278 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8279 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
8280 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
8281 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
8286 # :is1: resets scrolling region in case a previous user had used "tset vt100"
8287 oldsun|Sun Microsystems Workstation console,
8288 OTbs, am, km, mir, msgr,
8289 cols#80, it#8, lines#34,
8290 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
8291 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
8292 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
8293 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8294 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8295 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
8296 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
8297 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
8298 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
8299 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
8300 sun-il|Sun Microsystems console with working insert-line,
8303 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8304 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
8305 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
8306 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8307 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8308 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
8309 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
8310 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
8311 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
8312 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
8313 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
8314 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
8315 smso=\E[7m, u8=\E[1t, u9=\E[11t,
8316 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
8317 # flake out on the last line. Unfortunately, without them the terminal has no
8319 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
8320 il@, il1@, use=sun-il,
8321 # If you are using an SS5, change the sun definition to use sun-ss5.
8322 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
8325 sun+sl|Sun Workstation window status line,
8327 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
8329 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
8330 sun-s|Sun Microsystems Workstation window with status line,
8332 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
8333 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
8335 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
8336 sun-48|Sun 48-line window,
8337 cols#80, lines#48, use=sun,
8338 sun-34|Sun 34-line window,
8339 cols#80, lines#34, use=sun,
8340 sun-24|Sun 24-line window,
8341 cols#80, lines#24, use=sun,
8342 sun-17|Sun 17-line window,
8343 cols#80, lines#17, use=sun,
8344 sun-12|Sun 12-line window,
8345 cols#80, lines#12, use=sun,
8346 sun-1|Sun 1-line window for sysline,
8349 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
8350 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
8351 ich1@, rmir@, smir@, use=sun,
8352 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
8354 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
8355 sun-type4|Sun Workstation console with type 4 keyboard,
8356 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
8357 kcuu1=\E[215z, use=sun-il,
8359 # Most of the current references to sun-color are from users wondering why this
8360 # is the default on install. Details from reading the wscons manpage, adding
8361 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
8362 # when those were added -TD (2005-05-28)
8364 # According to wscons manpage, color is supported only on IA systems.
8365 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
8366 # does not list these. It also sets ncv#3, however that corresponds to
8367 # underline and standout.
8369 # Since the documentation and terminfo do not agree, see also current code at
8370 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
8372 # That (actually a different driver which "supports" sun-color) also supports
8379 # It supports bold, but not underline -TD (2009-09-19)
8380 sun-color|Sun Microsystems Workstation console with color support (IA systems),
8381 colors#8, ncv#3, pairs#64,
8382 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
8383 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
8384 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8385 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8387 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8389 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
8390 smso=\E[7m, use=sun,
8395 # (wsiris: this had extension capabilities
8396 # :HS=\E7F2:HE=\E7F7:\
8397 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
8398 # See the note on Iris extensions near the end of this file.
8399 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
8400 # <flash> from BRL -- esr)
8401 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
8402 OTbs, OTnc, OTpt, am,
8403 OTkn#3, cols#80, it#8, lines#40,
8404 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
8405 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8406 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
8407 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
8408 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
8409 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
8410 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
8411 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
8416 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
8417 # environment). Note: these have nothing to do with Sony's News workstation
8421 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
8422 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
8423 psterm|psterm-basic|NeWS psterm-80x34,
8424 OTbs, am, hs, km, ul,
8425 cols#80, it#8, lines#34,
8426 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
8427 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
8428 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
8429 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
8430 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
8431 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
8432 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
8434 psterm-96x48|NeWS psterm 96x48,
8435 cols#96, lines#48, use=psterm,
8436 psterm-90x28|NeWS psterm 90x28,
8437 cols#90, lines#28, use=psterm,
8438 psterm-80x24|NeWS psterm 80x24,
8439 cols#80, lines#24, use=psterm,
8440 # This is a faster termcap for psterm. Warning: if you use this termcap,
8441 # some control characters you type will do strange things to the screen.
8442 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
8443 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
8444 OTbs, am, hs, km, ul,
8445 cols#80, it#8, lines#34,
8446 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
8447 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
8448 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
8449 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8450 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
8451 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
8452 smso=^Oo, smul=^Ou, tsl=^Ol,
8456 # Use `glasstty' for the Workspace application
8459 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
8462 cols#80, it#8, lines#24,
8463 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8464 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8465 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8466 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
8467 nextshell|NeXT Shell application,
8470 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
8473 #### Sony NEWS workstations
8476 # (news-unk: this had :KB=news: -- esr)
8477 news-unk|SONY NEWS vt100 emulator common entry,
8478 OTbs, OTpt, am, xenl,
8480 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
8481 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
8482 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
8483 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8484 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
8485 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
8486 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
8487 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
8488 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
8489 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
8490 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
8491 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
8493 # (news-29: this had :TY=ascii: --esr)
8494 news-29|SONY NEWS vt100 emulator with 29 lines,
8495 lines#29, use=news-unk,
8496 # (news-29-euc: this had :TY=euc: --esr)
8497 news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
8499 # (news-29-sjis: this had :TY=sjis: --esr)
8500 news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
8503 # (news-33: this had :TY=ascii: --esr)
8504 news-33|SONY NEWS vt100 with 33 lines,
8505 lines#33, use=news-unk,
8506 # (news-33-euc: this had :TY=euc: --esr)
8507 news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
8509 # (news-33-sjis: this had :TY=sjis: --esr)
8510 news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
8513 # (news-42: this had :TY=ascii: --esr)
8514 news-42|SONY NEWS vt100 with 42 lines,
8515 lines#42, use=news-unk,
8516 # (news-42-euc: this had :TY=euc: --esr)
8517 news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
8519 # (news-42-sjis: this had :TY=sjis: --esr)
8520 news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
8523 # NEWS-OS old termcap entry
8525 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
8526 news-old-unk|SONY NEWS vt100 emulator common entry,
8527 OTbs, OTpt, am, xenl,
8529 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
8530 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
8531 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
8532 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
8533 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
8534 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
8535 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
8536 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8537 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
8539 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
8540 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
8543 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
8547 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
8548 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
8550 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
8553 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
8554 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
8557 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
8561 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
8562 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
8565 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
8569 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
8570 # also the alias vt100-bm.
8571 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
8574 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
8578 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
8579 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
8582 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
8586 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
8587 news28|sony vt100 emulator 28 lines,
8590 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
8594 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
8595 news29|news28-a|sony vt100 emulator 29 lines,
8597 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
8601 # (news511: this had :TY=sjis: --esr)
8602 nwp511|nwp-511|nwp-511 vt100,
8603 OTbs, OTpt, am, xenl,
8605 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8606 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
8607 ed=\E[J$<30/>, el=\E[K$<3/>,
8608 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8609 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
8610 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
8611 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
8612 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
8613 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
8614 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
8615 # (news517: this had :TY=sjis:. --esr)
8616 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
8619 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
8620 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
8621 tsl=\E[1$}\E[;%df, use=vt220-base,
8622 # (news517-w: this had :TY=sjis:. --esr)
8623 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
8626 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
8627 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
8628 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
8629 tsl=\E[1$}\E[;%df, use=vt220-base,
8631 #### Common Desktop Environment
8634 # This ships with Sun's CDE in Solaris 2.5
8635 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
8636 dtterm|CDE desktop terminal,
8637 am, mir, msgr, xenl, xon,
8638 cols#80, it#8, lines#24, lm#0, ncv@,
8639 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8640 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
8641 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8642 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8643 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8644 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
8645 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
8646 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
8647 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
8648 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
8649 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8650 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8651 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8652 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
8653 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
8654 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8655 khlp=\E[28~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
8656 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
8658 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
8659 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8660 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8661 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit,
8662 use=vt220+cvis, use=ecma+color,
8664 ######## Non-Unix Consoles
8667 #### EMX termcap.dat compatibility modes
8669 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
8670 # no_color_video to inform the application that standout(1), underline(2)
8671 # reverse(4) and invisible(64) don't work with color.
8672 emx-base|DOS special keys,
8675 bel=^G, use=ansi.sys,
8677 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
8678 # a Unix-style environment used on OS/2. (Note that the suffix makes some
8679 # names longer than 14 characters, the nominal maximum).
8681 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
8682 ansi-emx|ANSI.SYS color,
8683 am, bce, eo, mir, msgr, xon,
8684 colors#8, cols#80, it#8, lines#25, pairs#64,
8685 bel=^G, blink=\E[5m, bold=\E[1m,
8686 clear=\E[1;33;44m\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
8687 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8688 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
8689 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
8690 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
8691 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
8692 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
8693 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
8694 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
8695 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
8696 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=vt220+cvis,
8698 # nice colors for Emacs (white on blue, mode line white on cyan)
8699 ansi-color-2-emx|ANSI.SYS color 2,
8700 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
8701 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
8702 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
8703 smul=\E[1;36;44m, use=ansi-emx,
8704 # nice colors for Emacs (white on black, mode line black on cyan)
8705 ansi-color-3-emx|ANSI.SYS color 3,
8706 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
8707 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
8708 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
8709 smul=\E[0;36;40m, use=ansi-emx,
8710 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
8712 cols#80, it#8, lines#24,
8713 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8714 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8715 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
8716 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
8717 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
8718 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
8723 # Use this for cygwin32 (tested with beta 19.1)
8724 # underline is colored bright magenta
8725 # shifted kf1-kf12 are kf11-kf22
8726 cygwinB19|ANSI emulation for cygwin32,
8727 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
8728 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8729 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
8730 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
8731 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
8732 kf8=\E[19~, kf9=\E[20~, rmam@, smam@, use=vt220+pcedit,
8735 # Use this for cygwin (tested with version 1.1.0).
8736 # I've combined pcansi and linux. Some values of course were different and
8737 # I've indicated which of these were and which I used.
8738 # Cheers, earnie_boyd@yahoo.com
8739 # several changes based on running with tack and comparing with older entry -TD
8740 # more changes from csw:
8742 # remove eo [erase overstrike with blank]
8743 # change clear was \E[H\E[J now \E[2J (faster?)
8746 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
8748 # add cub [cursor back param]
8749 # add cuf [cursor forward param]
8750 # add cuu [cursor up param]
8751 # add cud [cursor down param]
8752 # add hs [has status line]
8753 # add fsl [return from status line]
8754 # add tsl [go to status line]
8755 # add smacs [Start alt charset] (not sure if this works)
8756 # add rmacs [End alt charset] (ditto)
8757 # add smcup [enter_ca_mode] (save console; thanks Corinna)
8758 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
8759 # add kb2 [center of keypad]
8760 # add u8 [user string 8] \E[?6c
8761 # add el [clear to end of line] \E[K
8763 # cnorm [make cursor normal] not implemented
8764 # flash [flash] not implemented
8765 # blink [blink] not implemented very usefully in cygwin? \E[5m
8766 # dim [dim] not implemented very usefully in cygwin? \E[2m
8767 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
8768 # kNXT [shifted next key] not implemented
8769 # kPRV [shifted prev key] not implemented
8770 # khome [home key] really is \E[1~ NOT \E[H
8771 # tbc [clear tab stops] not implemented
8772 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
8773 # smpch [Start PC charset] is \E[11m, same as smacs
8774 # rmpch [End PC charset] is \E[10m, same as rmacs
8775 # mir [move in insert mode] fails in tack?
8776 # bce [back color erase] causes problems with change background color?
8777 # cvvis [make cursor very visible] causes a stackdump when testing with
8778 # testcurs using the output option? \E[?25h\E[?8c
8779 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
8780 # ech [erase characters param] broken \E[%p1%dX
8781 # kcbt [back-tab key] not implemented in cygwin? \E[Z
8784 # Remove cbt since it does not work in current cygwin
8785 # Add 'mir' and 'in' flags based on tack
8786 cygwin|ANSI emulation for Cygwin,
8787 am, hs, mir, msgr, xon,
8788 colors#8, it#8, pairs#64,
8789 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8790 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8791 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8792 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
8793 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
8794 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8795 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
8796 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
8797 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
8798 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
8799 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8800 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8801 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8802 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
8803 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
8804 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kspd=^Z, nel=\r\n,
8805 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m,
8806 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmpch=\E[10m,
8807 rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
8808 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8809 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
8810 %t;8%;%?%p9%t;11%;m,
8811 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
8812 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
8813 vpa=\E[%i%p1%dd, use=vt220+pcedit, use=vt102+enq,
8815 # I've supplied this so that you can help test new values and add other
8816 # features. Cheers, earnie_boyd@yahoo.com.
8818 # Some features are from pcansi. The op value is from linux. Function-keys
8819 # are from linux. These have been tested not to cause problems. xenl was in
8820 # this list, but DOES cause problems so it has been removed
8821 cygwinDBG|Debug Version for Cygwin,
8822 am, eo, mir, msgr, xon,
8823 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
8824 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8825 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8826 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8827 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
8828 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
8829 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
8830 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
8831 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
8832 el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
8833 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
8834 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$,
8835 kPRV=\E[5$, kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
8836 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A, kf10=\E[21~,
8837 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8838 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8839 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
8840 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8841 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
8842 rmacs=\E[10m, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
8843 rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8844 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
8845 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
8846 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
8847 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt220+pcedit,
8848 use=vt220+cvis, use=vt102+enq,
8853 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
8854 # encodings used by other x86 environments. All others are invented for DJGPP.
8855 # Oddly enough, while several combinations of modifiers are tabulated, there is
8856 # none for shifted cursor keys.
8908 # Ctrl-Delete \E[43~
8909 # Ctrl-Down Arrow \E[38~
8912 # Ctrl-Insert \E[42~
8913 # Ctrl-Left Arrow \E[39~
8914 # Ctrl-Page Down \E[46~
8915 # Ctrl-Page Up \E[45~
8916 # Ctrl-Right Arrow \E[40~
8917 # Ctrl-Up Arrow \E[37~
8933 # Alt-Down Arrow \E[60~
8937 # Alt-Left Arrow \E[61~
8938 # Alt-Page Down \E[68~
8939 # Alt-Page Up \E[67~
8940 # Alt-Right Arrow \E[62~
8941 # Alt-Up Arrow \E[59~
8970 djgpp|ANSI emulation for DJGPP alpha,
8971 am, bce, msgr, xhp, xon, xt,
8972 colors#8, it#8, pairs#64,
8973 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8974 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8975 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8976 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
8977 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
8978 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8979 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8980 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
8981 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
8982 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
8983 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
8984 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8985 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8986 kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
8987 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, nel=\r\n, op=\E[37;40m,
8988 rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm,
8990 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
8991 %p6%t;1%;%?%p7%t;8%;m,
8992 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8993 use=vt220+pcedit, use=ecma+index,
8995 djgpp203|Entry for DJGPP 2.03,
8997 cols#80, it#8, lines#25,
8998 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
9001 djgpp204|Entry for DJGPP 2.04,
9003 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
9004 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
9005 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
9006 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9007 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9008 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
9009 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9010 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
9011 il1=\E[L, ind=\E[S, invis=\E[8m, kbs=^H, kcub1=\E[D,
9012 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, kf1=\E[[A,
9013 kf10=\E[21~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
9014 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kll=\E[4~,
9015 nel=\r\n, rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm,
9016 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9017 use=vt220+pcedit, use=ecma+index,
9021 # This is tested using U/Win's telnet. Scrolling is omitted because it is
9022 # buggy. Another odd bug appears when displaying "~" in alternate character
9023 # set (the emulator spits out error messages). Compare with att6386 -TD
9024 uwin|U/Win 3.2 console,
9025 am, eo, in, msgr, xenl, xon,
9026 colors#8, it#8, ncv#58, pairs#64,
9027 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
9028 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
9029 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
9030 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
9031 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9032 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
9033 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
9034 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D,
9035 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y,
9036 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ,
9037 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
9038 kf9=\EOX, khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m,
9039 rc=\E8, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
9040 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
9041 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
9042 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
9043 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
9046 #### Microsoft (miscellaneous)
9048 # This entry fits the Windows NT console when the _POSIX_TERM environment
9049 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
9050 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
9051 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
9052 # systems is not, and (surprise!) they match very well.
9054 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
9055 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
9056 # are the installation instructions a pile of mind-numbing bureaucratese,
9057 # but the termcap entry is actually broken and unusable as given; the :do:
9058 # capability is misspelled "d".
9060 # To use this, you need to a bunch of environment variables:
9062 # SET _POSIX_TERM=on
9064 # SET TERMCAP=location of termcap file in POSIX file format
9065 # which is case-sensitive.
9066 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
9069 # Important note: setting the TMP environment variable in POSIX style renders
9070 # it incompatible with a lot of other applications, including Visual C++. So
9071 # you should have a separate command window just for vi. All the other
9072 # variables may be permanently set in the Control Panel\System applet.
9074 # You can find out more about the restrictions of this facility at
9075 # <https://jeffpar.github.io/kbarchive/kb/108/Q108581/>
9077 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
9078 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
9080 cols#80, it#8, lines#25,
9081 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
9082 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
9083 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
9084 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
9085 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
9086 # From: jew@venus.sunquest.com
9087 # Date: 19 Feb 93 23:41:07 GMT
9088 # Here's a combination of ansi and vt100 termcap
9089 # entries that works nearly perfectly for me
9090 # (Gateway 2000 Handbook and Microsoft Works 3.0):
9091 pcmw|PC running Microsoft Works,
9093 cols#80, it#8, lines#24, vt#3,
9094 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
9095 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
9096 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
9097 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
9098 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
9099 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9100 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
9101 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
9102 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
9103 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9104 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
9107 # From: Federico Bianchi
9108 # This is the entry for the OpenNT terminal.
9109 # The ntconsole name is for backward compatibility.
9110 # This is for OpenNT 2.0 and later.
9111 # Later OpenNT was renamed to Interix.
9113 # Presently it is distributed by Microsoft as Services For Unix (SFU).
9114 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
9115 # the documentation dated from 1.9.9e) -TD
9117 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
9118 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
9119 # kf13-kf24 use the shift-key
9120 # kf25-kf36 use the left alt-key
9121 # kf37-kf38 use the control-key
9122 # kf49-kf60 use the shift- and control-keys
9123 # The shifted cursor keys send the sequences originally used for kf61-kf64:
9126 # left=\EF^ (unassigned)
9129 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
9131 cols#80, it#8, lines#25,
9132 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9133 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9134 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9135 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
9136 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
9137 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9138 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
9139 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
9140 kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9141 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[U,
9142 kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC,
9143 kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH,
9144 kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL,
9145 kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ,
9146 kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU,
9147 kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ,
9148 kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4,
9149 kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi,
9150 kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo,
9151 kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs,
9152 kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx,
9153 kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7, kf8=\EF8, kf9=\EF9,
9154 khome=\E[H, kich1=\E[L, kind=\EF+, kll=\E[U, knp=\E[T,
9155 kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u,
9156 rev=\E[7m, ri=\E[T, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
9157 rmul=\E[m, rs1=\Ec, sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b,
9158 smso=\E[7m, smul=\E[4m, use=ecma+index, use=klone+color,
9160 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
9161 lines#35, use=opennt,
9163 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
9164 lines#50, use=opennt,
9166 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
9167 lines#60, use=opennt,
9169 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
9170 lines#100, use=opennt,
9172 # OpenNT wide terminals
9173 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
9174 cols#125, use=opennt,
9176 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
9177 lines#35, use=opennt-w,
9179 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
9180 lines#50, use=opennt-w,
9182 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
9183 lines#60, use=opennt-w,
9185 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
9186 cols#132, use=opennt,
9188 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
9189 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
9190 rmcup@, smcup@, use=opennt,
9192 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
9193 lines#35, use=opennt-nti,
9195 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
9196 lines#50, use=opennt-nti,
9198 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
9199 lines#60, use=opennt-nti,
9201 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
9202 lines#100, use=opennt-nti,
9204 ######## COMMON TERMINAL TYPES
9206 # This section describes terminal classes and maker brands that are still
9207 # quite common, but have proprietary command sets not blessed by ANSI.
9212 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
9213 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
9214 # Acer has a web site at http://www.acer.com.
9216 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
9217 # His comments suggest they were shipped with the system.
9220 # (altos2: had extension capabilities
9221 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9222 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9223 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9224 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9225 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9226 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
9227 # :HL=^AP\r:SP=\E[i:\
9228 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
9229 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
9230 # Comparison with the k* capabilities makes it obvious that the c* things are
9231 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
9232 # :sr: was given as a boolean-- esr)
9233 altos2|alt2|altos-2|altos II,
9234 cols#80, it#8, lines#24, xmc#0,
9235 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
9236 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
9237 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
9238 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
9239 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
9240 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
9241 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
9242 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9243 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9244 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9245 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9246 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
9247 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
9248 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
9249 # (altos3: had extension capabilities
9250 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9251 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9252 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9253 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9254 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9255 # :HL=^AP\r:SP=\E[i:\
9256 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
9257 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
9258 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
9259 altos4|alt4|altos-4|altos IV,
9261 # (altos7: had extension capabilities:
9262 # :GG#0:GI=\EH8:GF=\EH7:\
9263 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9264 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9265 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9266 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9267 # Comparison with the k* capabilities makes it obvious that the c* things are
9268 # shift keys. I have renamed them to keys 32 and up accordingly. I have
9269 # also made this entry relative to adm12 in order to give it an <sgr>. The
9270 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
9271 altos7|alt7|altos VII,
9273 cols#80, lines#24, xmc#0,
9274 acsc=j5k3l2m1n8q:t4u9v=w0x6, blink=\EG2, bold=\EGt,
9275 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9276 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9277 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
9279 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
9280 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
9281 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
9282 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9283 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9284 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9285 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9286 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
9287 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
9288 rmir=\Er, smir=\Eq, use=adm+sgr,
9289 altos7pc|alt7pc|altos PC VII,
9290 kend=\ET, use=altos7,
9292 #### Hewlett-Packard (hp)
9295 # 8000 Foothills Blvd
9296 # Roseville, CA 95747
9297 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
9298 # 1-(800)-633-3600 (General customer support)
9301 # As of March 1998, HP no longer has any terminals in production.
9302 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
9303 # supported (they still have parts). So are the 2392a and 2394a.
9304 # See the WORKSTATION CONSOLES section for the 700s.
9307 # Generic HP terminal - this should (hopefully) work on any HP terminal.
9308 hpgeneric|hp|hewlett-packard generic terminal,
9309 OTbs, OTpt, am, da, db, mir, xhp,
9310 cols#80, lines#24, lm#0, vt#6,
9311 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9312 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
9313 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
9314 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
9315 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
9318 hp110|hewlett-packard model 110 portable,
9319 lines#16, use=hpgeneric,
9321 hp+pfk+cr|hp function keys with CR,
9322 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
9323 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
9325 hp+pfk-cr|hp function keys w/o CR,
9326 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
9329 # The hp2621s use the same keys for the arrows and function keys,
9330 # but not separate escape sequences. These definitions allow the
9331 # user to use those keys as arrow keys rather than as function
9333 hp+pfk+arrows|hp alternate arrow definitions,
9334 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
9335 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
9336 kll=\Eq\r, kri=\Es\r,
9338 hp+arrows|hp arrow definitions,
9339 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
9340 kind=\ES, kll=\EF, kri=\ET,
9342 # Generic stuff from the HP 262x series
9344 hp262x|HP 262x terminals,
9346 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
9347 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9348 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
9349 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
9350 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
9351 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
9352 %;%?%p4%t%{65}%|%;%c,
9353 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
9355 # Note: no <home> on HPs since that homes to top of memory, not screen.
9356 # Due to severe 2621 braindamage, the only way to get the arrow keys to
9357 # transmit anything at all is to turn on the function key labels
9358 # with <smkx>, and even then the user has to hold down shift!
9359 # The default 2621 turns off the labels except when it has to to
9360 # enable the function keys. If your installation prefers labels
9361 # on all the time, or off all the time (at the "expense" of the
9362 # function keys), use 2621-nl or 2621-wl.
9364 # Note: there are newer ROMs for 2621's that allow you to set
9365 # strap A so the regular arrow keys xmit \EA, etc, as with the
9366 # 2645. However, even with this strap set, the terminal stops
9367 # xmitting if you reset it, until you unset and reset the strap!
9368 # Since there is no way to set/unset the strap with an escape
9369 # sequence, we don't use it in the default.
9370 # If you like, you can use 2621-ba (brain-damaged arrow keys).
9371 hp2621-ba|2621 w/new rom and strap A set,
9372 rmkx@, smkx@, use=hp+arrows, use=hp2621,
9374 # hp2621 with function labels. Most of the time they are off,
9375 # but inside vi, the function key labels appear. You have to
9376 # hold down shift to get them to xmit.
9377 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
9378 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
9382 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
9383 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
9384 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
9385 use=hp+pfk+cr, use=hpgeneric,
9387 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
9388 hp2621p|hp 2621 with printer,
9389 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
9391 hp2621p-a|hp2621p with fn as arrows,
9392 use=hp+pfk+arrows, use=hp2621p,
9394 # hp2621 with k45 keyboard
9395 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
9396 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9397 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
9399 # 2621 using all 48 lines of memory, only 24 visible at any time.
9400 hp2621-48|48 line 2621,
9402 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
9405 # 2621 with no labels ever. Also prevents vi delays on escape.
9406 hp2621-nl|hp 2621 with no labels,
9407 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
9410 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
9413 hp2621-nt|hp 2621 w/no tabs,
9416 # Hp 2624 B with 4 or 10 pages of memory.
9418 # Some assumptions are made with this entry. These settings are
9419 # NOT set up by the initialization strings.
9421 # Port Configuration
9426 # Terminal Configuration
9432 # Note: the 2624 DOES have a true <home>, believe it or not!
9434 # The 2624 has an "error line" to which messages can be sent.
9435 # This is CLOSE to what is expected for a "status line". However,
9436 # after a message is sent to the "error line", the next carriage
9437 # return is EATEN and the "error line" is turned back off again!
9438 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
9440 # This entry supports emacs (and any other program that uses raw
9441 # mode) at 4800 baud and less. I couldn't get the padding right
9444 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
9445 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
9448 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
9450 # This hp2626 entry does not use any of the fancy windowing stuff
9453 # Indeed, terminfo does not yet handle such stuff. Since changing
9454 # any window clears memory, it is probably not possible to use
9455 # this for screen opt.
9457 # ed is incredibly slow most of the time - I am guessing at the
9458 # exact padding. Since the terminal uses xoff/xon this is intended
9459 # only for cost computation, so that the terminal will prefer el
9460 # or even dl1 which is probably faster!
9462 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
9463 # extra slow on the last line of the window.
9465 # The padding probably should be changed.
9467 hp2626|hp2626a|hp2626p|hp 2626,
9470 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
9471 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
9472 use=hp+labels, use=scrhp,
9474 # This entry is for sysline. It allocates a 23 line window with
9475 # a 115 line workspace for regular use, and a 1 line window for
9478 # This assumes port 2 is being used.
9479 # Turn off horizontal line, Create ws #1 with 115 lines,
9480 # Create ws #2 with 1 line, Create window #1 lines 1-23,
9481 # Create window #2 lines 24-24, Attach cursor to workspace #1.
9482 # Note that this clears the tabs so it must be done by tset before
9485 hp2626-s|hp 2626 using only 23 lines,
9488 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
9489 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
9490 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
9491 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
9492 # Force terminal back to 24 lines after being 23.
9493 hp2626-ns|hp 2626 using all 24 lines,
9494 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
9495 \s\E&w3f2I\s\E&w7f2p1I\s\r,
9497 # Various entries useful for small windows on 2626.
9498 hp2626-12|hewlett-packard 2626 12 lines,
9499 lines#12, use=hp2626,
9500 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
9501 cols#40, lines#12, use=hp2626,
9502 hp2626-x40|hewlett-packard 2626 40 columns,
9503 cols#40, use=hp2626,
9504 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
9505 lines#11, use=hp2626-s,
9508 # hp2627 color tubes from University of Wisconsin
9510 hp2627a-rev|hp 2627 with reverse video colors,
9511 cr=\r, cud1=\n, ht=^I, ind=\n,
9512 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
9514 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
9515 smul=\E&dD\E&v1S, use=hp2621-nl,
9516 hp2627a|hp 2627 color terminal with no labels,
9517 cr=\r, cud1=\n, ht=^I, ind=\n,
9518 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
9519 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
9520 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
9522 hp2627c|hp 2627 color (cyan) terminal with no labels,
9523 cr=\r, cud1=\n, ht=^I, ind=\n,
9524 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
9525 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
9527 # hp2640a doesn't have the Y cursor addressing feature, and C is
9528 # memory relative instead of screen relative, as we need.
9531 cup@, rmkx@, smkx@, use=hp2645,
9533 hp2640b|hp2644a|hp 264x series,
9534 rmkx@, smkx@, use=hp2645,
9536 # (hp2641a: removed unknown :gu: -- esr)
9537 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
9538 am, da, db, mir, xhp,
9540 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9541 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
9542 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
9543 if=/usr/share/tabset/std, il1=\EL, ind=\n,
9544 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9545 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
9548 # This terminal should be used at 4800 baud or less. It needs padding for
9549 # plain characters at 9600, I guessed at an appropriate cr delay. It really
9550 # wants ^E/^F handshaking, but that doesn't work well even if you write
9551 # software to support it.
9552 hp2645|hp45|HP 2645 series,
9554 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
9555 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9556 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
9557 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
9559 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
9560 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
9561 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
9562 # You should use this terminal at 4800 baud or less.
9563 hp2648|hp2648a|HP 2648a graphics terminal,
9564 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
9565 dch1=\EP$<7>, ip=$<5>, use=hp2645,
9567 # The HP 150 terminal is a fairly vanilla HP terminal, with the
9568 # clreol standout problem. It also has graphics capabilities and
9569 # a touch screen, which we don't describe here.
9570 hp150|hewlett packard Model 150,
9573 # HP 2382a terminals, "the little ones." They don't have any
9574 # alternate character set support and sending out ^N/^O will
9575 # leave the screen blank.
9576 hp2382a|hp2382|hewlett packard 2382a,
9580 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
9583 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
9584 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
9585 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
9587 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
9589 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
9590 use=hp+pfk+arrows, use=hp2621-fl,
9592 # newer hewlett packard terminals
9594 newhpkeyboard|generic entry for HP extended keyboard,
9595 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9596 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
9597 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
9598 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
9601 newhp|generic entry for new hewlett packard terminals,
9602 am, bw, mir, xhp, xon,
9603 cols#80, lines#24, pb#4800,
9604 acsc=2[3@4>5I9(:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X:Y+Z*dHjGkTlRmFn
9606 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
9607 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
9608 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
9609 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
9610 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
9611 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
9612 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
9613 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
9614 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
9615 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
9616 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
9617 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
9618 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
9619 tbc=\E3, use=newhpkeyboard,
9621 memhp|memory relative addressing for new HP ttys,
9623 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
9624 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
9625 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
9626 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
9628 scrhp|screen relative addressing for new HP ttys,
9629 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
9630 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
9631 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
9632 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
9633 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
9635 # (hp+labels: added label values from a BRL termcap -- esr)
9636 hp+labels|"standard" label info for new HP ttys,
9638 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
9639 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
9641 rmln=\E&j@, smln=\E&jB,
9643 hp+printer|"standard" printer info for HP ttys,
9644 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
9647 # The new hp2621b is kind of a cross between the old 2621 and the
9648 # new 262x series of machines. It has dip-switched options.
9649 # The firmware has a bug in it such that if you give it a null
9650 # length label, the following character is eaten!
9651 hp2621b|hp 2621b with old style keyboard,
9652 lh#1, lm#48, lw#8, nlab#8,
9653 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
9654 kind=\ET, kll=\EF, kri=\ES,
9655 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
9656 %;%p2%s\E%{111}%p1%+%c\r,
9657 smln=\E&jB, use=hp2621,
9659 hp2621b-p|hp 2621b with printer,
9660 use=hp+printer, use=hp2621b,
9662 # hp2621b - new 2621b with new extended keyboard
9663 # these are closer to the new 26xx series than the other 2621b
9664 hp2621b-kx|hp 2621b with extended keyboard,
9665 use=newhpkeyboard, use=hp2621b,
9667 hp2621b-kx-p|hp 2621b with new keyboard & printer,
9668 use=hp+printer, use=hp2621b-kx,
9670 # Some assumptions are made in the following entries.
9671 # These settings are NOT set up by the initialization strings.
9673 # Port Configuration
9674 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
9676 # Terminal Configuration
9677 # InhHndShk(G)=Yes InhDC2(H)=Yes
9678 # XmitFnctn(A)=No InhEolWrp=No
9681 # Hp 2622a & hp2623a display and graphics terminals
9683 hp2622|hp2622a|hp 2622,
9686 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
9688 # The 2623 is a 2622 with extra graphics hardware.
9689 hp2623|hp2623a|hp 2623,
9692 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
9693 use=hp+printer, use=hp2624,
9695 # The hewlett packard B can have an optional extra 6 pages of memory.
9696 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
9699 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
9700 lm#240, use=hp2624b-p,
9702 # Color manipulations for HP terminals
9703 hp+color|hp with colors,
9705 colors#16, ncv#17, pairs#7,
9706 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
9707 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
9708 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
9709 %t1%e.%p7%d%;z%p1%dI,
9710 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
9711 I\E&v1b1c6I\E&v1x1y7I,
9712 op=\E&v0S, scp=\E&v%p1%dS,
9714 # <is2> sets the screen to be 80 columns wide
9715 hp2397a|hp2397|hewlett packard 2397A color terminal,
9716 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
9718 # HP 700/44 Setup parameters:
9719 # Terminal Mode HP-PCterm
9720 # Inhibit Auto Wrap NO
9721 # Status Line Host Writable
9722 # PC Character Set YES
9723 # Twenty-Five Line Mode YES
9724 # XON/XOFF @128 or 64 (sc)
9725 # Keycode Mode NO or YES (sc)
9726 # Backspace Key BS or BS/DEL
9728 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
9729 # \E\\? does not turn off keycode mode
9730 # <smsc> sets alternate start/stop; keycode on
9731 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
9734 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
9736 bel=^G, cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub1=\E[D,
9737 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
9738 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9739 ich1=\E[@, il1=\E[L, ind=\n,
9740 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
9741 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9742 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
9743 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
9744 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
9745 kpp=\E[5~, rmam=\E[?7l,
9746 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
9747 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
9748 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
9749 smul=\E[4m, xoffc=g, xonc=e, use=vt220+cvis,
9751 # (hp2392: copied <rmir> here from hpex -- esr)
9754 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
9755 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
9756 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
9757 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
9760 hpsub|hp terminals -- capability subset,
9761 am, da, db, mir, xhp, xon,
9763 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
9764 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
9765 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
9766 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
9767 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
9768 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
9771 # May be used for most 24 x 80 hp terminals,
9772 # but has no padding added, so may allow runover in some terminals at high
9773 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
9774 # hp98x5 terminal emulators or hp98x6 consoles.
9775 # Adds xy-cursor addressing, vertical cursor addressing, home,
9776 # last line, and underline capabilities.
9778 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
9779 # moved <rmir> here from hpsub -- esr)
9780 hpex|hp extended capabilities,
9781 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
9782 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
9783 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
9785 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
9786 hp2|hpex2|hewlett-packard extended capabilities newer version,
9787 am, da, db, mir, xhp,
9788 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
9789 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
9790 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
9791 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
9792 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
9793 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9794 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
9795 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
9796 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
9797 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
9798 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
9799 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
9800 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
9801 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
9802 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
9803 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
9804 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
9805 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
9806 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9809 # From: <ddavis@ic.berkeley.edu>
9810 hp236|hp236 internal terminal emulator,
9813 clear=\EF, cnorm=\EDE, cub1=^H,
9814 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
9815 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
9816 sgr0=\ECI, smso=\EBI,
9818 # This works on a hp300 console running Utah 4.3 BSD
9819 # From: Craig Leres <leres@okeeffe.berkeley.edu>
9820 hp300h|HP Catseye console,
9821 OTbs, am, da, db, mir, xhp,
9822 cols#128, lines#51, lm#0, xmc#0,
9823 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
9824 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
9825 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
9826 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
9827 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
9828 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
9829 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
9831 # From: Greg Couch <gregc@ernie.berkeley.edu>
9832 hp9837|hp98720|hp98721|HP 9000/300 workstations,
9833 OTbs, am, da, db, mir, xhp,
9834 cols#128, it#8, lines#46, lm#0,
9835 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
9836 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
9837 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
9838 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
9839 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9840 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
9841 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
9842 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
9843 tbc=\E3, vpa=\E&a%p1%dY,
9844 # HP 9845 desktop computer from BRL
9845 # (hp9845: removed unknown capability :gu: -- esr)
9847 OTbs, am, da, db, eo, mir, xhp,
9849 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
9850 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
9851 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
9852 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
9853 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
9854 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
9855 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
9856 hp98550|hp98550a|HP 9000 Series 300 color console,
9857 OTbs, am, da, db, mir, xhp,
9858 cols#128, it#8, lines#49, lm#0,
9859 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
9860 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9861 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
9862 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
9863 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
9864 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9865 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
9866 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
9867 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
9868 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
9869 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
9870 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
9871 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9873 # From: Martin Trusler
9874 hp98550-color|hp98550a-color|HP 9000 Series 300 color console,
9875 OTbs, am, ccc, da, db, km, mir, xhp,
9876 colors#8, cols#128, it#8, lh#2, lines#49, lm#0, lw#8, nlab#8,
9878 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
9879 u+v+w+x|y<z>{*|!}\273~\362,
9880 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
9881 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
9882 dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, home=\E&a0y0C,
9883 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\ES,
9884 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
9885 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
9886 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
9887 %t1%e.%p7%d%;z%p1%dI,
9888 is1=\EH\EJ, kbs=^H, kctab=\E2, kcub1=\ED, kcud1=\EB,
9889 kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
9890 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
9891 kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES,
9892 kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3,
9894 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
9895 I\E&v1b1c6I\E&v1x1y7I,
9896 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
9897 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
9898 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
9899 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
9900 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
9901 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
9903 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%{64}%+%c%?%p9%t%'
9904 \016'%c%e%'\017'%c%;,
9905 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
9906 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
9907 smul=\E&dD, tbc=\E3, u6=\Ea%dc%dR\r, u7=\Ea,
9908 u8=\E%[0123456789/], u9=\E*s1\^, vpa=\E&a%p1%dY,
9910 # From: Victor Duchovni <vic@fine.princeton.edu>
9911 # (hp700-wy: removed obsolete ":nl=^J:";
9912 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
9913 hp700-wy|HP700/41 emulating wyse30,
9914 OTbs, am, bw, mir, msgr,
9915 cols#80, it#8, lines#24, xmc#1,
9916 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9917 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9918 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
9919 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
9920 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
9921 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
9922 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
9923 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
9924 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
9925 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
9926 hp70092|hp70092a|hp70092A|HP 700/92,
9928 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
9929 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
9930 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
9931 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
9932 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
9933 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
9934 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9935 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
9936 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
9937 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
9938 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
9939 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
9940 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
9941 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9943 bobcat|sbobcat|HP 9000 model 300 console,
9944 am, da, db, mir, xhp,
9945 cols#128, it#8, lines#47, xmc#0,
9946 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
9947 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
9948 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
9949 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
9950 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
9951 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
9952 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
9953 gator-t|HP 9000 model 237 emulating extra-tall AAA,
9954 lines#94, use=gator,
9955 gator|HP 9000 model 237 emulating AAA,
9957 cols#128, it#8, lines#47,
9958 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
9959 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
9960 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
9961 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
9962 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
9963 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9964 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
9965 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9966 gator-52|HP 9000 model 237 emulating VT52,
9967 cols#128, lines#47, use=vt52-basic,
9968 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
9969 lines#94, use=gator-52,
9973 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
9976 # Honeywell Bull terminal. Its cursor and function keys send single
9977 # control characters and it has standout/underline glitch. Most programs
9978 # do not like these features/bugs. Visual bell is realized by flashing the
9979 # "keyboard locked" LED.
9980 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
9982 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
9983 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
9984 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
9985 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
9986 dku7003|Honeywell Bull DKU 7003 all features described,
9989 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
9990 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9993 #### Lear-Siegler (adm)
9995 # These guys are long since out of the terminals business, but
9996 # in 1995 many current terminals still have an adm type as one of their
9997 # emulations (usually their stupidest, and usually labeled adm3, though
9998 # these `adm3' emulations normally have adm3a+ capabilities).
10000 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
10001 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
10002 # was being held to ground would trigger a send of the top line on the screen.
10003 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
10004 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
10005 # for clearing up this point.)
10007 adm1a|adm1|lsi adm1a,
10010 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10011 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
10016 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10017 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10018 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
10019 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
10020 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
10024 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
10025 # The following ADM-3A switch settings are assumed for normal operation:
10026 # SPACE U/L_DISP CLR_SCRN 24_LINE
10027 # CUR_CTL LC_EN AUTO_NL FDX
10028 # Other switches may be set for operator convenience or communication
10029 # requirements. I recommend
10030 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
10032 # Most of these terminals required an option ROM to support lower case display.
10033 # Open the case and look at the motherboard; if you see an open 24-pin DIP
10034 # socket, you may be out of luck.
10036 # (adm3a: some capabilities merged in from BRl entry -- esr)
10040 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
10041 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10042 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
10046 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
10049 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
10050 rmso=\EG, smso=\EG, use=adm3a+,
10051 # A lot of terminals other than adm11s use these. Wherever you see
10052 # use=adm+sgr with some of its capabilities disabled, try the
10053 # disabled ones. They may well work but not have been documented or
10054 # expressed in the using entry. We'd like to cook up an <sgr> but the
10055 # <rmacs>/<smacs> sequences of the using entries vary too much.
10056 adm+sgr|adm style highlight capabilities,
10057 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
10058 smso=\EG4, smul=\EG8,
10059 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
10060 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
10061 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
10062 # be ^Z, according to his entry.
10063 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
10064 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
10067 OTkn#8, cols#80, lines#24,
10068 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
10069 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10070 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
10071 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10072 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10073 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
10075 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
10076 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
10077 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
10078 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
10079 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
10080 # via BRL. That entry asserted <xmc#1>, but I've left that out because
10081 # neither earlier nor later ADMSs have it -- esr)
10083 # You will need to get into the supervisor setup before you can set
10084 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
10085 # see a lot more setup options.
10087 # While in supervisor setup you can also use following codes:
10089 # Ctrl-P Personality character selections (configure for example what
10090 # arrow keys send, if I recall correctly)
10091 # Ctrl-T tabs 1-80 use left&right to move and up to set and
10092 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
10093 # Ctrl-B Binary setup (probably not needed. I think that everything can
10094 # be set using normal setup)
10095 # Ctrl-A Answerback mode (enter answerback message)
10096 # Ctrl-U User friendly mode (normal setup)
10097 # Ctrl-D Defaults entire setup and function keys from EPROM tables
10098 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
10099 # Ctrl-R Reads both setup and functions keys from NVM.
10100 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
10102 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
10103 # RTS/CTS used nowadays with virtually every modem and computer. 19200
10104 # bps works fine with hardware flow control.
10106 # The following null-modem cable should fix this and enable you to use
10107 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
10108 # set ADM-12+ for DTR handshaking from supervisor setup.
10110 # PC Serial ADM-12+
10121 OTbs, OTpt, am, mir,
10122 OTug#1, cols#80, it#8, lines#24,
10123 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10124 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10125 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
10126 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
10127 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
10128 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
10129 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10130 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10131 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
10133 # (adm20: removed obsolete ":kn#7:" -- esr)
10134 adm20|lear siegler adm20,
10136 cols#80, it#8, lines#24,
10137 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
10138 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
10139 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
10140 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
10141 sgr0=\E(, smso=\E),
10142 adm21|lear siegler adm21,
10144 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
10145 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
10146 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
10147 use=adm+sgr, use=adm3a,
10148 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
10149 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
10150 # removed bogus-looking \200 from before <cup>. -- esr)
10154 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10155 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10156 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
10157 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
10159 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10160 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10161 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10162 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
10163 # ADM 31 DIP Switches
10165 # This information comes from two versions of the manual for the
10166 # Lear-Siegler ADM 31.
10170 # +-||||-------------------------------------+
10185 # +----------------------------------------------+
10186 # front of case (keyboard)
10188 # S1 - Data Rate - Modem
10189 # S2 - Data Rate - Printer
10190 # ------------------------
10191 # Data Rate Setting
10192 # -------------------
10210 # S3 - Interface/Printer/Attributes
10211 # ---------------------------------
10212 # Printer Busy Control
10215 # off off off Busy not active, CD disabled
10216 # off off on Busy not active, CD enabled
10217 # off on off Busy active on J5-20, CD disabled
10218 # on off off Busy active on J5-19, CD disabled - Factory Set.
10219 # on off on Busy active on J5-19, CD enabled
10221 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
10223 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
10225 # sw6 ON enables printer BUSY active LOW - Factory Setting
10226 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
10228 # sw7 ON - steady cursor - Factory Setting
10229 # OFF - blinking cursor
10231 # sw8 ON causes selected attribute character to be displayed
10232 # OFF causes SPACE to be displayed instead - Factory Setting
10238 # sw4 sw1 sw2 sw3 sw4
10239 # ---------------------------
10240 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
10241 # Current Loop disabled - Factory Setting
10242 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
10244 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
10245 # Current Loop Disabled
10247 # sw5 ON disables dot stretching mode - Factory Setting
10248 # OFF enables dot stretching mode
10249 # sw6 ON enables blanking function
10250 # OFF enables underline function - Factory Setting
10251 # sw7 ON causes NULLS to be displayed as NULLS
10252 # OFF causes NULLS to be displayed as SPACES - Factory Setting
10254 # S5 - Word Structure
10255 # -------------------
10256 # sw1 ON enables BREAK key - Factory Setting
10257 # OFF disables BREAK key
10258 # sw2 ON selects 50Hz monitor refresh rate
10259 # OFF selects 60Hz monitor refresh rate - Factory Setting
10261 # Modem Port Selection
10264 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
10265 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
10266 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
10267 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
10268 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
10269 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
10270 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
10271 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
10273 # sw6 ON sends bit 8 a 1 (mark)
10274 # OFF sends bit 8 as 0 (space) - Factory Setting
10275 # sw7 ON selects Block Mode
10276 # OFF selects Conversation Mode - Factory Setting
10277 # sw8 ON selects Full Duplex operation
10278 # OFF selects Half Duplex operation - Factory Setting
10282 # sw1, sw2, sw6, sw7 Reserved - Factory 0
10284 # Printer Port Selection
10285 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
10287 # sw8 ON enables Printer Port
10288 # OFF disables Printer Port - Factory Setting
10290 # S7 - Polling Address
10291 # --------------------
10292 # sw1-7 Establish ASCII character which designates terminal polling address
10294 # OFF = logic 1 - Factory Setting
10295 # sw8 ON enables Polling Option
10296 # OFF disables Polling Option - Factory Setting
10299 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
10301 # This adm31 entry uses underline as the standout mode.
10302 # If the adm31 gives you trouble with standout mode, check the DIP switch in
10303 # position 6, bank @c11, 25% from back end of the circuit board. Should be
10304 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
10305 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
10306 adm31|lsi adm31 with sw6 set for underline mode,
10309 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10310 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10311 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
10312 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10313 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10314 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
10315 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
10316 adm31-old|o31|old adm31,
10317 rmul@, smso=\EG4, smul@, use=adm31,
10318 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
10322 if=/usr/share/tabset/vt100,
10323 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
10324 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
10328 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10329 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10330 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
10331 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
10332 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
10333 smir=\Eq, smul@, use=adm+sgr,
10334 # The following termcap for the Lear Siegler ADM-42 leaves the
10335 # "system line" at the bottom of the screen blank (for those who
10336 # find it distracting otherwise)
10337 adm42-ns|lsi adm-42 with no system line,
10338 cbt=\EI\EF \011, clear=\E;\EF \011,
10339 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
10340 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
10341 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
10342 smir=\Eq\EF \011, use=adm42,
10343 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
10344 # The insert mode of this terminal is commented out because it's broken for our
10345 # purposes in that it will shift the position of every character on the page,
10346 # not just the cursor line!
10347 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
10348 adm1178|1178|lsi adm1178,
10350 cols#80, lines#24, xmc#1,
10351 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
10352 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10353 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
10354 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
10355 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
10356 sgr0=\E), smso=\EG4, smul=\EG1,
10360 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
10361 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
10362 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
10364 # ComputerVision Services
10365 # 500 Old Connecticut Path
10366 # Framingham, Mass.
10369 # Standout mode is dim reverse-video.
10370 pt100|pt200|wren|fenix|prime pt100/pt200,
10372 cols#80, it#8, lines#24,
10373 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
10374 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
10375 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
10376 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
10377 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
10378 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
10379 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
10380 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
10382 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
10384 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
10385 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
10387 cup=\E[%i%p1%d;%p2%dH, use=pt100,
10389 rmso@, smso@, use=pt100,
10390 pt250w|Prime PT250 in 132-column mode,
10391 rmso@, smso@, use=pt100w,
10396 # 3475-A North 1st Street
10397 # San Jose CA 95134
10398 # Vox: (800)-457-4447
10399 # Fax: (408)-473-1510
10400 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
10402 # Qume was bought by Wyse, but still (as of early 1995) has its own support
10403 # group and production division.
10405 # Discontinued Qume models:
10407 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
10408 # built to replace them, and a qvt119+ which was a 101+ with available wide
10409 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
10410 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
10411 # ANSI-compatible terminals with the qvt323 and qvt61.
10413 # Current Qume models (as of February 1995):
10415 # All current Qume terminals have ANSI-compatible operation modes.
10416 # Qume is still producing the qvt62, which features emulations for other
10417 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
10418 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
10419 # with many emulations including Wyse370, Wyse 325, etc. Their newest
10420 # model is the qvt520, which is vt420-compatible.
10422 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
10424 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
10425 # setup mode. Shift-s should be a configuration save to NVRAM.
10427 qvt101|qvt108|qume qvt 101 and QVT 108,
10428 xmc#1, use=qvt101+,
10430 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
10431 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
10432 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
10433 # What seems to be going on here is that this entry was designed so that
10434 # the normal highlight is bold and standout is dim plus something else
10435 # (reverse-video maybe? But then, are there two <rev> sequences?)
10437 # Added kdch1, kil1, kdl1 based on screenshot -TD:
10438 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
10439 qvt101+|qvt101p|qume qvt 101 PLUS product,
10441 cols#80, lines#24, xmc#0,
10442 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
10443 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10444 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
10445 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
10446 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
10447 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10448 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
10449 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10450 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
10451 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
10452 qvt102|qume qvt 102,
10453 cnorm=\E., use=qvt101,
10454 # (qvt103: added <rmam>/<smam> based on init string -- esr)
10455 qvt103|qume qvt 103,
10457 cols#80, it#8, lines#24, vt#3,
10458 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10459 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
10460 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
10461 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
10462 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
10463 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
10464 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10465 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
10466 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
10467 rmso=\E[m$<2>, rmul=\E[m$<2>,
10468 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
10469 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
10471 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
10472 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10473 qvt103-w|qume qvt103 132 cols,
10474 cols#132, lines#24,
10475 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
10476 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
10478 cols#80, lines#24, xmc#0,
10479 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
10480 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10481 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
10482 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
10483 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
10484 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
10485 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10486 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10487 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
10488 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
10489 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
10490 lines#25, use=qvt119+,
10491 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
10493 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
10494 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
10495 lines#25, use=qvt119+,
10496 qvt203|qvt203+|qume qvt 203 Plus,
10497 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
10498 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
10499 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
10500 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
10501 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
10502 cols#132, lines#24,
10503 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
10505 # Since a command is present for enabling 25 data lines,
10506 # a specific terminfo entry may be generated for the 203.
10507 # If one is desired for the QVT 119 PLUS then 25 lines must
10508 # be selected in the status line (setup line 9).
10510 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
10512 is2=\E[=40h\E[?3l, use=qvt203,
10513 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
10514 cols#132, lines#25,
10515 rs2=\E[?3h\E[=40h, use=qvt203,
10517 #### Televideo (tvi)
10520 # 550 East Brokaw Road
10521 # PO Box 49048 95161
10522 # San Jose CA 95112
10523 # Vox: (408)-954-8333
10524 # Fax: (408)-954-0623
10527 # These require incredible amounts of padding.
10529 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
10530 # Televideo terminals are ANSI and PC-ANSI compatible.
10532 tvi803|televideo 803,
10533 clear=\E*$<10>, use=tvi950,
10535 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
10536 # Switch settings are:
10557 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
10573 # U do CR/LF when CR received
10574 # D do CR when CR received
10596 # S2 6 Cursor down key
10600 # S2 7 Screen colour
10604 # S2 8 DSR status (pin 6)
10608 # S2 9 DCD status (pin 8)
10612 # S2 10 DTR status (pin 20)
10615 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
10616 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
10617 tvi910|televideo model 910,
10619 cols#80, it#8, lines#24, xmc#1,
10620 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10621 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
10622 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
10623 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
10624 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
10625 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10626 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10627 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
10628 # From: Alan R. Rogers <rogers%albany@csnet-relay>
10629 # as subsequently hacked over by someone at SCO
10630 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
10632 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
10635 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
10636 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
10637 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
10638 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
10641 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
10642 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
10643 # D U D D 8O1 D U U U 8E2
10645 # S1 9 Autowrap (U = on, D = off)
10646 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
10647 # S2 1 Mode (U = block, D = conversational)
10648 # S2 2 Duplex (U = half, D = full)
10649 # S2 3 Hertz (U = 50, D = 60)
10650 # S2 4 Edit mode (U = local, D = duplex)
10651 # S2 5 Cursor type (U = underline, D = block)
10652 # S2 6 Cursor down key (U = send ^J, D = send ^V)
10653 # S2 7 Screen colour (U = green on black, D = black on green)
10654 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
10655 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
10656 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
10658 tvi910+|televideo 910+,
10659 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
10660 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
10661 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
10662 ll=\E=7\s, use=tvi910,
10664 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
10665 # <khome> from BRL entry -- esr)
10666 tvi912|tvi914|tvi920|old televideo 912/914/920,
10667 OTbs, OTpt, am, msgr,
10668 cols#80, it#8, lines#24, xmc#1,
10669 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10670 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10671 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
10672 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
10673 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
10674 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
10675 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10676 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
10678 # We got some new tvi912c terminals that act really weird on the regular
10679 # termcap, so one of our gurus worked this up. Seems that cursor
10680 # addressing is broken.
10681 tvi912cc|tvi912 at cowell college,
10684 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
10685 # From: Benjamin C. W. Sittler
10687 # Someone has put a scanned copy of the manual online at:
10688 # http://vt100.net/televideo/912b-om/
10689 # (https://vt100.net/manx/details/6,5484)
10691 # These terminals were produced ca. 1979, and had a 12" monochrome
10692 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
10693 # ASCII, and were generally similar to adm3a but with attributes
10694 # (including some with magic cookies), fancy half-duplex mode, and
10697 # Some operations require truly incredible amounts of padding. The
10698 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
10699 # are so slow as to be nearly unusable.
10701 # There may or may not have been a separate, earlier series of 912/920
10702 # terminals (without the "B" and "C" suffix); I have never seen one,
10703 # and the manual only describes the "B" and "C" series. The 912 and 920
10704 # are quite distinct from the 914 and 924, which were much nicer non-
10705 # magic-cookie terminals similar to the 950.
10707 # This is a new description for the following TeleVideo terminals,
10708 # distinguished chiefly by their keyboards:
10710 # TVI-912B - very odd layout, no function keys (84 keys)
10711 # TVI-920B - typewriter layout, no function keys (103 keys)
10712 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
10713 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
10715 # To choose a setting for the TERM variable, start with the model:
10717 # Model || base name
10718 # ----------||-----------
10719 # TVI-912B || tvi912b
10720 # TVI-912C || tvi912c
10721 # TVI-920B || tvi920b
10722 # TVI-920C || tvi920c
10724 # Then add a suffix from the following table describing installed options
10725 # and how you'd like to use the terminal:
10727 # Use Video | Second | Visual | Magic | Page || feature
10728 # Attributes | Page | Bell | Cookies | Print || suffix
10729 # ------------|--------|--------|---------|-------||---------
10730 # No | No | N/A | N/A | No || -unk
10731 # No | No | N/A | N/A | Yes || -p
10732 # No | Yes | No | N/A | No || -2p-unk
10733 # No | Yes | No | N/A | Yes || -2p-p
10734 # No | Yes | Yes | N/A | No || -vb-unk
10735 # No | Yes | Yes | N/A | Yes || -vb-p
10736 # Yes | No | N/A | No | N/A ||
10737 # Yes | No | N/A | Yes | N/A || -mc
10738 # Yes | Yes | No | No | N/A || -2p
10739 # Yes | Yes | No | Yes | N/A || -2p-mc
10740 # Yes | Yes | Yes | No | N/A || -vb
10741 # Yes | Yes | Yes | Yes | N/A || -vb-mc
10743 # So e.g. a model 920 C with second page memory option, visual bell
10744 # and no magic cookies would be tvi920c-vb; a model 912 B without the
10745 # second page memory option and using magic cookies would be
10750 # At 9600 baud, the terminal is prone to overflow its input buffer
10751 # during complex operations (insert/delete
10752 # character/line/screen/page), and it does not signal this over the
10753 # RS232 cable. The typical symptom of an overrun is that the terminal
10754 # starts beeping, and output becomes garbled.
10756 # The padding delays in this terminfo were derived using tack(1)
10757 # running on a Linux box connected to a TVI-920C with a later-model
10758 # (A49C1-style) ROM running at 9600 baud, so your mileage may
10759 # vary. The numbers below seem to give the terminal enough time so
10760 # that it doesn't overflow its input buffer and start losing
10765 # If you want to use the FUNCT key on a tvi912[bc], use the
10766 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
10767 # the following table (these also work on the 920 series):
10769 # Unshifted Function Keys:
10771 # Key | capname|| Equivalent
10772 # -----|--------||------------
10773 # F1 | <kf1> || FUNCT + @
10774 # F2 | <kf2> || FUNCT + A
10775 # F3 | <kf3> || FUNCT + B
10776 # F4 | <kf4> || FUNCT + C
10777 # F5 | <kf5> || FUNCT + D
10778 # F6 | <kf6> || FUNCT + E
10779 # F7 | <kf7> || FUNCT + F
10780 # F8 | <kf8> || FUNCT + G
10781 # F9 | <kf9> || FUNCT + H
10782 # F10 | <kf10> || FUNCT + I
10783 # F11 | <kf11> || FUNCT + J
10785 # Shifted Function Keys:
10787 # SHIFT + Key | capname|| Equivalent
10788 # -------------|--------||------------
10789 # SHIFT + F1 | <kf12> || FUNCT + `
10790 # SHIFT + F2 | <kf13> || FUNCT + a
10791 # SHIFT + F3 | <kf14> || FUNCT + b
10792 # SHIFT + F4 | <kf15> || FUNCT + c
10793 # SHIFT + F5 | <kf16> || FUNCT + d
10794 # SHIFT + F6 | <kf17> || FUNCT + e
10795 # SHIFT + F7 | <kf18> || FUNCT + f
10796 # SHIFT + F8 | <kf19> || FUNCT + g
10797 # SHIFT + F9 | <kf20> || FUNCT + h
10798 # SHIFT + F10 | <kf21> || FUNCT + i
10799 # SHIFT + F11 | <kf22> || FUNCT + j
10801 # PORTS AND SWITCH SETTINGS
10803 # Here are the switch settings for the TVI-912B/TVI-920B and
10804 # TVI-912C/TVI-920C:
10806 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
10807 # 2: 9600 3: 4800 4: 2400 5: 1200
10808 # 6: 600 7: 300 8: 150 9: 75
10811 # S2 UART/Terminal options:
10813 # 1: Not used Not allowed
10814 # 2: Alternate character set Standard character set
10815 # 3: Full duplex Half duplex
10816 # 4: 50 Hz refresh 60 Hz refresh
10817 # 5: No parity Send parity
10818 # 6: 2 stop bits 1 stop bit
10819 # 7: 8 data bits 7 data bits
10820 # 8: Not used Not allowed on Rev E or lower
10821 # 9: Even parity Odd parity
10822 # 10: Steady cursor Blinking cursor
10823 # (On Rev E or lower, use W25 instead of switch 10.)
10825 # S5 UART/Terminal options:
10827 # 1: P3-6 Not connected DSR received on P3-6
10828 # 2: P3-8 Not connected DCD received on P3-8
10830 # 3 Open, 4 Open: P3-20 Not connected
10831 # 3 Open, 4 Closed: DTR on when terminal is on
10832 # 3 Closed, 4 Open: DTR is connected to RTS
10833 # 3 Closed, 4 Closed: Not allowed
10835 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
10836 # all data transmitted out of the modem port (P3) will also be
10837 # transmitted out of the printer port (P4).
10839 # 6 Open, 7 Open: Not allowed
10840 # 6 Open, 7 Closed: 20ma current loop input
10841 # 6 Closed, 7 Open: RS232 input
10842 # 6 Closed, 7 Closed: Not allowed
10845 # If the jumper is installed, the effect will occur (the next time the terminal
10848 # S4/W31: Enables automatic LF upon receipt of CR from
10849 # remote or keyboard.
10850 # S4/W32: Enables transmission of EOT at the end of Send. If not
10851 # installed, a carriage return is sent.
10852 # S4/W33: Disables automatic carriage return in column 80.
10853 # S4/W34: Selects Page Print Mode as initial condition. If not
10854 # installed, Extension Mode is selected.
10856 # NON-STANDARD CAPABILITIES
10858 # Sending <u9> or <u7> returns a cursor position report in the format
10859 # YX\r, where Y and X are as in <cup>. This format is described in
10860 # <u8> and <u6>, but it's not clear how one should write an
10861 # appropriate scanf string, since we need to subtract %' ' from the
10862 # character after reading it. The <u9> capability is used by tack(1)
10863 # to synchronize during padding tests, and seems to work for that
10866 # This description also includes the obsolete termcap capabilities
10867 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
10869 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
10871 # The FUNCT modifier actually works with every normal key by sending
10872 # ^AX\r, where X is the sequence normally sent by that key. This is a
10873 # sort of meta key not currently describable in terminfo.
10875 # There are quite a few other keys (especially on the 920 models,) but
10876 # they are for the most part only useful in block mode.
10878 # These terminals have lots of forms manipulation features, mainly
10879 # useful in block mode, including "clear X to nulls" (vs. "clear X to
10880 # spaces"; nulls are sentinels for "send X" operations); "send X"
10881 # operations for uploading all or part of the screen; and block-mode
10882 # editing keys (they don't send escape sequences, but manipulate video
10883 # memory directly). Block mode is used for local editing, and protect
10884 # mode (in conjunction with the "write protect" attribute,
10885 # a.k.a. half-intensity outside of protect mode) is used to control
10886 # which parts of the screen are edited/sent/printed (by <mc0>).
10888 # There are at least two major families of ROM, "early" and
10889 # A49B1/A49C1; the major difference seems to be that the latter ROMs
10890 # support a few extra escape sequences for manipulating the off-screen
10891 # memory page, and for sending whole pages back to the host (mainly
10892 # useful in block mode.) The descriptions in this file don't use any
10893 # of those sequences: set cursor position including page (\E-PYX,
10894 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
10895 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
10896 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
10897 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
10898 # are as in <cup>, and some "send page" features mainly useful for
10899 # forms manipulation.
10901 # The keyboard enable (\E") and disable (\E#) sequences are unused,
10902 # except that a terminal reset (<is2>) enables the keyboard.
10904 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
10905 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
10909 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
10910 # sequences (I infer that in some TeleVideo terminal they may invert
10911 # and uninvert the display) so the <flash> sequence given here is a
10912 # cheesy page-flip instead.
10914 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
10915 # tack(1), so it is not included in the descriptions below.
10917 # It's not clear whether auto_left_margin (<bw>) flag should be set
10918 # for these terminals; tack says yes, so it is set here, but this
10919 # differs from other descriptions I've seen.
10921 # Extension print mode (<mc5>) echoes all characters to the printer
10922 # port [in addition to displaying them] except for the page print mode
10923 # sequence (<mc4>); this is a slight violation of the terminfo
10924 # definition for <mc5> but I don't expect it to cause problems. We
10925 # reset to page print mode in <rs1> since it may have been enabled
10928 # The descriptions with plus signs (+) are building blocks.
10930 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
10931 OTbs, OTpt, am, bw,
10932 cols#80, it#8, lines#24,
10933 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10934 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
10935 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
10936 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
10937 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
10938 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
10939 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
10940 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
10941 u7=\E?, u8=%c%c\r, u9=\E?,
10943 # This isn't included in the basic capabilities because it is
10944 # typically unusable in combination with the full range of video
10945 # attributes, since the magic cookie attributes turn into ASCII
10946 # control characters, and the half-intensity ("protected") attribute
10947 # converts all affected characters to spaces.
10949 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
10952 # This uses half-intensity mode (<dim>) for standout (<smso>), and
10953 # exposes no other attributes (half-intensity is the only attribute
10954 # that does not generate a magic cookie.)
10956 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
10958 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
10961 # Full magic-cookie attribute support, with half-intensity reverse
10962 # video for standout. Note that we add a space in the <dim> sequence
10963 # to give a consistent magic-cookie count. Also note that <sgr> uses
10964 # backspacing (in the TVI-supported order) to apply all requested
10965 # attributes with only a single magic cookie.
10967 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
10969 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
10971 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
10972 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
10973 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
10975 # This uses the second page memory option to save & restore screen
10976 # contents. If your terminal is missing the option, this description
10977 # should still work, but that has not been tested.
10979 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
10980 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
10981 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
10983 # This simulates flashing by briefly toggling to the other page
10986 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
10987 bel=\EK$<100>\EK, use=tvi912b+2p,
10989 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
10991 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
10992 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
10993 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
10994 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
10995 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10996 kf8=^AG\r, kf9=^AH\r,
10998 # Combinations of the basic building blocks
11000 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
11001 use=tvi912b+2p, use=tvi912b-unk,
11003 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
11004 use=tvi912b+vb, use=tvi912b-unk,
11006 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
11007 use=tvi912b+printer, use=tvi912b-unk,
11009 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
11010 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
11012 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
11013 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
11015 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
11016 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
11018 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
11019 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
11021 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
11022 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
11024 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
11025 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
11027 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
11028 use=tvi912b+dim, use=tvi912b-unk,
11030 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
11031 use=tvi912b+mc, use=tvi912b-unk,
11033 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
11034 use=tvi920b+fn, use=tvi912b-unk,
11036 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
11037 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
11039 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
11040 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
11042 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
11043 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
11045 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
11046 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
11049 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
11050 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
11053 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
11054 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
11057 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
11058 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
11061 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
11062 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
11065 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
11066 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
11069 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
11070 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
11072 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
11073 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
11075 # Televideo 921 and variants
11076 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
11077 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
11078 # also added empty <acsc> to suppress tic warning -- esr)
11079 tvi921|televideo model 921 with sysline same as page & real vi function,
11080 OTbs, OTpt, am, hs, xenl, xhp,
11081 cols#80, lines#24, xmc#0,
11082 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11083 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11084 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11085 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
11086 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
11087 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
11088 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
11089 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
11090 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
11091 # without the beeper
11092 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
11093 # also added empty <acsc> to suppress tic warning -- esr)
11094 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
11096 cols#80, lines#24, xmc#0,
11097 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11098 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11099 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11100 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
11101 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11102 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
11103 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
11104 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
11105 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
11106 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
11107 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
11108 dl1=\ER$<2*/>, il1=\EE$<2*/>,
11109 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
11110 kil1=\EE$<2*/>, use=tvi92B,
11112 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
11113 # in from a BSD termcap file because it looks like they do something the
11114 # old ones skip -- esr)
11115 tvi924|televideo tvi924,
11116 am, bw, hs, in, mir, msgr, xenl, xon,
11117 cols#80, it#8, lines#24, wsl#80, xmc#0,
11118 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
11119 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
11120 cub1=^H, cud1=^V, cuf1=^L,
11121 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
11122 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
11123 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
11124 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11125 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
11126 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
11127 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
11128 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
11129 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
11130 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
11131 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
11132 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
11133 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
11136 # TVI925 DIP switches. In each of these, D = Down and U = Up,
11138 # Here are the settings for the external (baud) switches (S1):
11141 # 7 8 9 10 [Printer]
11142 # 1 2 3 4 [Main RS232]
11143 # -----------------------------------------------------
11162 # Settings for word length and stop-bits (S1)
11164 # Position Description
11166 # ---------------------------
11173 # S2 (external) settings
11175 # Position Up Dn Description
11176 # --------------------------------------------
11178 # X Duplex edit (transmit editing keys)
11179 # --------------------------------------------
11180 # 2 X 912/920 emulation
11182 # --------------------------------------------
11186 # --------------------------------------------
11190 # --------------------------------------------
11194 # --------------------------------------------
11198 # --------------------------------------------
11202 # --------------------------------------------
11203 # 6 X White on black display
11204 # X Black on white display
11205 # --------------------------------------------
11208 # --------------------------------------------
11211 # --------------------------------------------
11214 # --------------------------------------------
11217 # --------------------------------------------
11218 # 10 X CR/LF (Auto LF)
11221 # S3 (internal switch) settings:
11223 # Position Up Dn Description
11224 # --------------------------------------------
11227 # --------------------------------------------
11230 # --------------------------------------------
11233 # --------------------------------------------
11236 # --------------------------------------------
11239 # --------------------------------------------
11240 # 4 X Blinking block cursor
11242 # --------------------------------------------
11243 # 4 X Blinking underline cursor
11245 # --------------------------------------------
11246 # 4 X Steady block cursor
11248 # --------------------------------------------
11249 # 4 X Steady underline cursor
11251 # --------------------------------------------
11252 # 6 X Screen blanking timer (ON)
11253 # X Screen blanking timer (OFF)
11254 # --------------------------------------------
11255 # 7 X Page attributes
11256 # X Line attributes
11257 # --------------------------------------------
11258 # 8 X DCD disconnected
11260 # --------------------------------------------
11261 # 9 X DSR disconnected
11263 # --------------------------------------------
11264 # 10 X DTR Disconnected
11266 # --------------------------------------------
11268 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
11269 tvi925|televideo 925,
11270 OTbs, am, bw, hs, ul,
11271 cols#80, lines#24, xmc#1,
11272 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
11273 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11274 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
11275 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
11276 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
11277 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
11278 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
11279 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
11280 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
11281 tsl=\Eh\Ef, use=adm+sgr,
11282 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
11283 # to avoid "magic cookie" standout glitch:
11284 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
11286 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
11288 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
11289 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
11290 # for additional capabilities,
11291 # The following tvi descriptions from B:pjphar and virus!mike
11292 # is for all 950s. It sets the following attributes:
11293 # full duplex (\EDF) write protect off (\E()
11294 # conversation mode (\EC) graphics mode off (\E%)
11295 # white on black (\Ed) auto page flip off (\Ew)
11296 # turn off status line (\Eg) clear status line (\Ef\r)
11297 # normal video (\E0) monitor mode off (\EX or \Eu)
11298 # edit mode (\Er) load blank char to space (\Ee\040)
11299 # line edit mode (\EO) enable buffer control (^O)
11300 # protect mode off (\E\047) duplex edit keys (\El)
11301 # program unshifted send key to send line all (\E016)
11302 # program shifted send key to send line unprotected (\E004)
11303 # set the following to nulls:
11304 # field delimiter (\Ex0\200\200)
11305 # line delimiter (\Ex1\200\200)
11306 # start-protected field delimiter (\Ex2\200\200)
11307 # end-protected field delimiter (\Ex3\200\200)
11308 # set end of text delimiter to carriage return/null (\Ex4\r\200)
11310 # TVI 950 Switch Setting Reference Charts
11314 # S1 1 2 3 4 5 6 7 8 9 10
11315 # +-----------------------+-----+-----+-----------------------+
11316 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
11317 # | |Bits |Bits | |
11318 # +------+-----------------------+-----+-----+-----------------------+
11319 # | Up | See | 7 | 2 | See |
11320 # +------+-----------------------+-----+-----+-----------------------+
11321 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
11322 # +------+-----------------------+-----+-----+-----------------------+
11325 # S2 1 2 3 4 5 6 7 8 9 10
11326 # +-----+-----+-----------------+-----+-----------+-----+-----+
11327 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
11328 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11329 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
11330 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11331 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
11332 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11336 # +-----------+-----+-----+-----+-----+-----------+
11337 # | Display | 1 | 2 | 3 | 4 | Baud |
11338 # +-----------+-----+-----+-----+-----+ |
11339 # | Printer | 7 | 8 | 9 | 10 | Rate |
11340 # +-----------+-----+-----+-----+-----+-----------+
11341 # | D | D | D | D | 9600 |
11342 # | U | D | D | D | 50 |
11343 # | D | U | D | D | 75 |
11344 # | U | U | D | D | 110 |
11345 # | D | D | U | D | 135 |
11346 # | U | D | U | D | 150 |
11347 # | D | U | U | D | 300 |
11348 # | U | U | U | D | 600 |
11349 # | D | D | D | U | 1200 |
11350 # | U | D | D | U | 1800 |
11351 # | D | U | D | U | 2400 |
11352 # | U | U | D | U | 3600 |
11353 # | D | D | U | U | 4800 |
11354 # | U | D | U | U | 7200 |
11355 # | D | U | U | U | 9600 |
11356 # | U | U | U | U | 19200 |
11357 # +-----+-----+-----+-----+-----------+
11360 # +-----+-----+-----+-----------+
11361 # | 3 | 4 | 5 | Parity |
11362 # +-----+-----+-----+-----------+
11363 # | X | X | D | None |
11364 # | D | D | U | Odd |
11365 # | D | U | U | Even |
11366 # | U | D | U | Mark |
11367 # | U | U | U | Space |
11368 # +-----+-----+-----+-----------+
11372 # +-----+-----+-----------------+
11373 # | 7 | 8 | Communication |
11374 # +-----+-----+-----------------+
11375 # | D | D | Half Duplex |
11376 # | D | U | Full Duplex |
11377 # | U | D | Block |
11378 # | U | U | Local |
11379 # +-----+-----+-----------------+
11381 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
11382 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
11383 # should be present and all tvi native modes use the same string for this.
11384 # Finally, note that BSD has cud1=^V. -- esr)
11386 # TVI 950 has 11 function-keys -TD
11387 tvi950|televideo 950,
11388 OTbs, am, hs, mir, msgr, xenl, xon,
11389 cols#80, it#8, lines#24, xmc#1,
11390 acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
11391 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11392 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11393 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
11394 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
11396 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11397 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11399 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
11400 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r,
11401 kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
11402 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
11403 khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej,
11404 rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3,
11405 tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r,
11406 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
11407 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
11409 # is for 950 with two pages adds the following:
11410 # set 48 line page (\E\\2)
11411 # place cursor at page 0, line 24, column 1 (\E-07 )
11412 # set local (no send) edit keys (\Ek)
11414 # two page 950 adds the following:
11415 # when entering ex, set 24 line page (\E\\1)
11416 # when exiting ex, reset 48 line page (\E\\2)
11417 # place cursor at 0,24,1 (\E-07 )
11418 # set duplex (send) edit keys (\El) when entering vi
11419 # set local (no send) edit keys (\Ek) when exiting vi
11421 tvi950-2p|televideo950 w/2 pages,
11422 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11423 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11425 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11426 smkx=\El, use=tvi950,
11428 # is for 950 with four pages adds the following:
11429 # set 96 line page (\E\\3)
11430 # place cursor at page 0, line 24, column 1 (\E-07 )
11432 # four page 950 adds the following:
11433 # when entering ex, set 24 line page (\E\\1)
11434 # when exiting ex, reset 96 line page (\E\\3)
11435 # place cursor at 0,24,1 (\E-07 )
11437 tvi950-4p|televideo950 w/4 pages,
11438 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11439 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11441 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11442 smkx=\El, use=tvi950,
11444 # <is2> for reverse video 950 changes the following:
11445 # set reverse video (\Ed)
11447 # set vb accordingly (\Ed ...delay... \Eb)
11449 tvi950-rv|televideo950 rev video,
11450 flash=\Ed$<200/>\Eb,
11451 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11452 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
11456 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
11457 tvi950-rv-2p|televideo950 rev video w/2 pages,
11458 flash=\Ed$<200/>\Eb,
11459 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11460 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11462 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11463 smkx=\El, use=tvi950,
11465 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
11466 tvi950-rv-4p|televideo950 rev video w/4 pages,
11467 flash=\Ed$<200/>\Eb,
11468 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11469 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11471 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11472 smkx=\El, use=tvi950,
11473 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
11474 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
11475 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
11476 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
11477 # the :ko: string had :cl: in it, which means that one of the original
11478 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
11479 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
11480 # ko implies -- esr)
11481 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
11483 tvi955|televideo 955,
11486 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
11487 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
11488 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
11489 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
11490 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
11491 rmam=\E[=7l, rmxon=^N,
11492 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
11494 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
11496 tvi955-w|955-w|televideo955 w/132 cols,
11498 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
11499 # use half-intensity as normal mode, full intensity as <bold>
11500 tvi955-hb|955-hb|televideo955 half-bright,
11501 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
11502 sgr0=\EG0\E[=5h, use=tvi955,
11503 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
11504 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
11505 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
11506 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
11507 # it does to the function keys. I deduced <rmam>/<smam>.
11508 # also added empty <acsc> to suppress tic warning, -- esr)
11509 tvi970|televideo 970,
11510 OTbs, OTpt, am, da, db, mir, msgr,
11511 cols#80, it#8, lines#24,
11512 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
11513 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
11514 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
11515 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
11516 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
11517 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
11518 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11519 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
11520 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
11521 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
11522 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
11523 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
11524 smul=\E[4m, vpa=\E[%i%p1%dd,
11525 tvi970-vb|televideo 970 with visual bell,
11526 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
11528 tvi970-2p|televideo 970 with using 2 pages of memory,
11529 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
11531 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
11532 # per line (rather than 40), Esc K chooses the normal character set. Not sure
11533 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
11534 # <smul> strings are klutzy, but at least use no screen space.
11535 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
11536 # its absence means <smam>=\Ev isn't safe to use. -- esr)
11537 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
11538 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
11539 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
11540 tvipt|televideo personal terminal,
11543 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
11544 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
11545 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
11546 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
11547 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
11548 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
11549 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
11550 tvi9065|televideo 9065,
11551 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
11552 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
11554 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
11555 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
11556 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
11557 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
11558 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
11559 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
11560 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
11561 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
11562 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
11563 il=\E[%p1%dL, il1=\EE, ind=\n, invis=\EG1, ip=$<3>,
11564 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
11565 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
11566 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
11567 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
11568 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11569 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
11570 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
11571 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
11572 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
11573 pfx=\E|%p1%{48}%+%c1%p2%s\031,
11574 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
11575 rep=\E[%p2%db%p1%c, rev=\EG4,
11576 rf=/usr/share/tabset/stdcrt, ri=\Ej, rmacs=\E%%,
11577 rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0,
11578 rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N,
11579 rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
11580 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
11581 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
11582 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
11583 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
11584 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
11586 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
11587 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
11589 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
11590 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
11591 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, use=ecma+index,
11595 # In September 1993, Visual Technology of Westboro, Massachusetts,
11596 # merged with White Pine Software of Nashua, New Hampshire.
11598 # White Pine Software may be contacted at +1 603/886-9050.
11599 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
11602 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
11603 # Recently I hacked together the following termcap for Visual
11604 # Technology's Visual 50 terminal. It's a slight modification of
11605 # the vt52 termcap.
11606 # It's intended to run when the Visual 50 is in vt52 emulation mode
11607 # (I know what you're thinking; if it's emulating a vt52, then why
11608 # another termcap? Well, it turns out that the Visual 50 can handle
11609 # <dl1> and db(?) among other things, which the vt52 can't)
11610 # The termcap works OK for the most part. The only problem is on
11611 # character inserts. The whole line gets painfully redrawn for each
11612 # character typed. Any suggestions?
11613 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
11614 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
11615 # disguise; <kf7>-<kf9> are really l1-l3.
11617 OTbs, OTpt, am, da, db, msgr,
11618 cols#80, it#8, lines#24,
11619 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
11620 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11621 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
11622 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
11623 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
11624 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
11625 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
11626 # this one was BSD & SCO's vi50
11627 vi50adm|visual 50 in adm3a mode,
11629 cols#80, it#8, lines#24,
11630 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11631 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
11632 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
11633 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
11634 rmso=\ET, smso=\EU,
11635 # From: Jeff Siegal <jbs@quiotix.com>
11637 OTbs, am, mir, msgr,
11638 cols#80, it#8, lines#24,
11639 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
11640 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11641 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
11642 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
11643 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
11644 smir=\Ea, smso=\EU,
11646 # Visual 200 from BRL
11647 # The following switch settings are assumed for normal operation:
11648 # FULL_DUPLEX SCROLL CR
11649 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
11650 # Other switches may be set for operator convenience or communication
11652 # Character insertion is kludged in order to get around the "beep" misfeature.
11653 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
11654 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
11655 # and <dl1> strings, but we seem to get along fine without them.
11657 OTbs, OTpt, am, mir, msgr,
11658 OTkn#10, cols#80, it#8, lines#24,
11659 acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
11660 clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
11661 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed,
11662 dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I,
11663 hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev,
11664 kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11665 kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q,
11666 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
11667 kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL,
11668 krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG,
11669 rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX,
11670 sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg,
11671 # The older Visuals didn't come with function keys. This entry uses
11672 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
11673 # If your version of vi doesn't support function keys you may want
11675 vi200-f|visual 200 no function keys,
11676 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
11677 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
11678 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
11680 vi200-rv|visual 200 reverse video,
11681 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
11683 # the function keys are programmable but we don't reprogram them to their
11684 # default values with <is2> because programming them is very verbose. maybe
11685 # an initialization file should be made for the 300 and they could be stuck
11687 # (vi300: added <rmam>/<smam> based on init string -- esr)
11688 vi300|visual 300 ansi x3.64,
11691 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
11692 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
11693 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
11695 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
11696 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11697 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
11698 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
11699 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
11700 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
11701 smso=\E[1m, smul=\E[4m,
11702 # some of the vi300s have older firmware that has the command
11703 # sequence for setting editing extent reversed.
11704 vi300-old|visual 300 with old firmware (set edit extent reversed),
11705 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
11707 # Visual 500 prototype entry from University of Wisconsin.
11708 # The best place to look for the escape sequences is page A1-1 of the
11709 # Visual 500 manual. The initialization sequence given here may be
11710 # overkill, but it does leave out some of the initializations which can
11711 # be done with the menus in set-up mode.
11712 # The :xp: line below is so that emacs can understand the padding requirements
11713 # of this slow terminal. :xp: is 10 time the padding factor.
11714 # (vi500: removed unknown :xp#4: termcap;
11715 # also added empty <acsc> to suppress tic warning -- esr)
11718 cols#80, it#8, lines#33,
11719 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
11720 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
11721 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
11722 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
11723 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
11725 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
11726 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11727 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
11728 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
11730 # The visual 550 is a visual 300 with tektronix graphics,
11731 # and with 33 lines. clear screen is modified here to
11732 # also clear the graphics.
11733 vi550|visual 550 ansi x3.64,
11735 clear=\030\E[H\E[2J, use=vi300,
11737 vi603|visual603|visual 603,
11739 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
11740 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
11741 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
11742 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
11743 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
11744 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
11745 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11746 tsl=\EP2~, use=vt100+4bsd,
11751 # 3471 North First Street
11752 # San Jose, CA 95134
11753 # Vox: (408)-473-1200
11754 # Fax: (408) 473-1222
11755 # Web: http://www.wyse.com
11757 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
11758 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
11759 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
11760 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
11763 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
11764 # They now own the Qume and Amdek brands, too. So these are the people to
11765 # talk with about all Link, Qume, and Amdek terminals.
11767 # These entries include a few small fixes.
11768 # I canceled the bel capacities in the vb entries.
11769 # I made two trivial syntax fixes in the wyse30 entry.
11770 # I made some entries relative to adm+sgr.
11773 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
11775 # Although the Wyse 30 can support more than one attribute
11776 # it requires magic cookies to do so. Many applications do not
11777 # function well with magic cookies. The following terminfo uses
11778 # the protect mode to support one attribute (dim) without cookies.
11779 # If more than one attribute is needed then the wy30-mc terminfo
11782 wy30|wyse30|Wyse 30,
11783 am, bw, hs, mc5i, mir, msgr, xon,
11784 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
11785 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
11786 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
11787 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
11788 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
11789 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
11790 fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
11791 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
11792 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
11793 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
11794 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11795 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
11796 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
11797 mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
11798 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
11799 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
11800 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
11801 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
11802 smso=\E`7\E), tbc=\E0, tsl=\EF,
11804 # This terminal description uses the non-hidden attribute mode
11805 # (with magic cookie).
11807 # (wy30-mc: added <smcup> to suppress tic warning --esr)
11808 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
11811 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
11812 rmcup=\EG0, rmso=\EG0,
11813 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
11814 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
11815 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
11816 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
11817 smso=\EG4, use=wy30, use=adm+sgr,
11818 # The mandatory pause used by <flash> does not work with
11819 # older versions of terminfo. If you see this effect then
11820 # unset xon and delete the / from the delay.
11821 # i.e. change $<100/> to $<100>
11822 wy30-vb|wyse30-vb|wyse 30 visible bell,
11825 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
11826 # Normal) without magic cookies by using the protect mode.
11827 # The following description uses this feature, but when more
11828 # than one attribute is put on the screen at once, all attributes
11829 # will be changed to be the same as the last attribute given.
11830 # The Wyse 50 can support more attributes when used with magic
11831 # cookies. The wy50-mc terminal description uses magic cookies
11832 # to correctly handle multiple attributes on a screen.
11834 wy50|wyse50|Wyse 50,
11835 am, bw, hs, mc5i, mir, msgr, xon,
11836 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
11837 acsc=a;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, cbt=\EI,
11838 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
11839 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
11840 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
11841 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
11842 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
11843 is1=\E`:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
11844 kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
11845 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
11846 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
11847 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11848 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11849 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
11850 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
11851 pfx=\Ez%p1%{63}%+%c%p2%s\177,
11852 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
11853 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
11854 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
11856 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
11857 smso=\E`6\E), tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r,
11858 kF11=^Aj\r, kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r,
11859 kF16=^Ao\r, kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r,
11860 kF6=^Ae\r, kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r,
11862 # This terminal description uses the non-hidden attribute mode
11863 # (with magic cookie).
11865 # The mandatory pause used by flash does not work with some
11866 # older versions of terminfo. If you see this effect then
11867 # unset <xon> and delete the / from the delay.
11868 # i.e. change $<100/> to $<100>
11869 # (wy50-mc: added <smcup> to suppress tic warning --esr)
11870 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
11873 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
11874 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
11875 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
11876 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
11877 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
11878 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
11879 smso=\EGt, use=wy50, use=adm+sgr,
11880 wy50-vb|wyse50-vb|wyse 50 visible bell,
11882 wy50-w|wyse50-w|wyse 50 132-column,
11883 cols#132, lw#7, nlab#16, wsl#97,
11884 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
11886 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
11890 # The Wyse 350 is a Wyse 50 with color.
11891 # Unfortunately this means that it has magic cookies.
11892 # The color attributes are designed to overlap the reverse, dim and
11893 # underline attributes. This is nice for monochrome applications
11894 # because you can make underline stuff green (or any other color)
11895 # but for true color applications it's not so hot because you cannot
11896 # mix color with reverse, dim or underline.
11897 # To further complicate things one of the attributes must be
11898 # black (either the foreground or the background). In reverse video
11899 # the background changes color with black letters. In normal video
11900 # the foreground changes colors on a black background.
11901 # This terminfo uses some of the more advanced features of curses
11902 # to display both color and blink. In the final analysis I am not
11903 # sure that the wy350 runs better with this terminfo than it does
11904 # with the wy50 terminfo (with user adjusted colors).
11906 # The mandatory pause used by flash does not work with
11907 # older versions of terminfo. If you see this effect then
11908 # unset xon and delete the / from the delay.
11909 # i.e. change $<100/> to $<100>
11911 # Bug: The <op> capability resets attributes.
11912 wy350|wyse350|Wyse 350,
11913 am, bw, hs, mc5i, mir, xon,
11914 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
11916 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
11917 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
11918 cub1=^H, cud1=\n, cuf1=^L,
11919 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
11920 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
11921 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11922 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>,
11923 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
11924 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
11925 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
11926 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
11927 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11928 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11929 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
11930 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
11931 pfx=\Ez%p1%{63}%+%c%p2%s\177,
11932 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
11933 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
11934 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
11935 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
11936 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
11938 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
11939 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
11940 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
11942 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
11943 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
11944 wy350-vb|wyse350-vb|wyse 350 visible bell,
11946 wy350-w|wyse350-w|wyse 350 132-column,
11947 cols#132, lw#7, nlab#16, wsl#97,
11948 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
11950 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
11953 # This terminfo description is untested.
11954 # The wyse100 emulates an adm31, so the adm31 entry should work.
11958 cols#80, lines#24, xmc#1,
11959 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11960 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11961 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
11962 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
11963 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
11964 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
11965 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
11967 # The Wyse 120/150 has most of the features of the Wyse 60.
11968 # This terminal does not need padding up to 9600 baud!
11969 # <msgr> should be set but the clear screen fails when in
11970 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
11973 wy120|wyse120|wy150|wyse150|Wyse 120/150,
11974 am, bw, hs, km, mc5i, mir, msgr, xon,
11975 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11976 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11977 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11978 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11979 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11980 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11981 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
11982 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11983 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11985 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11986 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11987 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11988 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11989 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11990 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11991 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11992 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
11993 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11994 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11995 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11996 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
11997 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
11998 rs3=\EwG\Ee($<100>,
11999 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12000 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12001 %{64}%|%;%?%p7%t%{1}%|%;%c,
12002 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12003 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12004 tbc=\E0, tsl=\EF, use=adm+sgr,
12006 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
12007 cols#132, lw#7, nlab#16, wsl#97,
12008 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
12009 rs2=\E`;$<70>, use=wy120,
12011 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
12012 lh@, lines#25, lw@, nlab@,
12013 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
12015 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
12016 lh@, lines#25, lw@, nlab@,
12017 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
12019 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
12022 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
12025 # The Wyse 60 is like the Wyse 50 but with more padding.
12026 # The reset strings are slow and the pad times very depending
12027 # on other parameters such as font loading. I have tried
12028 # to follow the following outline:
12030 # <rs1> -> set personality
12031 # <rs2> -> set number of columns
12032 # <rs3> -> set number of lines
12033 # <is1> -> select the proper font
12034 # <is2> -> do the initialization
12035 # <is3> -> set up display memory (2 pages)
12037 # The Wyse 60's that have vt100 emulation are slower than the
12038 # older Wyse 60's. This change happened mid-1987.
12039 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
12041 # The meta key is only half right. This terminal will return the
12042 # high order bit set when you hit CTRL-function_key
12044 # It may be useful to assign two function keys with the
12045 # values \E=(\s look at old data in page 1
12046 # \E=W, look at bottom of page 1
12047 # where \s is a space ( ).
12050 # The Wyse 60 runs faster when the XON/XOFF
12051 # handshake is turned off.
12053 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
12054 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12055 wy60|wyse60|Wyse 60,
12056 am, bw, hs, km, mc5i, mir, msgr,
12057 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
12058 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12059 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
12060 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12061 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12062 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
12063 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
12064 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
12065 ip=$<3>, is1=\EcB0\EcC1,
12066 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12068 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12069 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12070 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12071 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12072 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12073 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12074 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12075 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
12076 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12077 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12078 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
12079 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
12080 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
12081 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
12082 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12083 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12084 %{64}%|%;%?%p7%t%{1}%|%;%c,
12085 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12086 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12087 tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r,
12088 kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r,
12089 kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
12090 kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
12092 wy60-w|wyse60-w|wyse 60 132-column,
12093 cols#132, lw#7, nlab#16, wsl#97,
12094 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
12095 rs2=\EeF$<150>\E`;$<150>, use=wy60,
12097 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
12098 lh@, lines#25, lw@, nlab@,
12099 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
12100 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
12101 lh@, lines#25, lw@, nlab@,
12102 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
12104 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
12106 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
12107 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
12108 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
12109 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
12110 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
12111 cols#132, lw#7, nlab#16, wsl#97,
12112 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
12113 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
12114 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
12116 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
12117 lh@, lines#43, lw@, nlab@,
12118 pln@, rs3=\Ee+$<150>, use=wy60-42,
12119 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
12120 lh@, lines#43, lw@, nlab@,
12121 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
12123 wy60-vb|wyse60-vb|Wyse 60 visible bell,
12125 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
12128 # The Wyse-99GT looks at lot like the Wyse 60 except that it
12129 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
12130 # setup parameter controls the number of lines on the screen.
12131 # For the Wyse 99GT the "lines" setup parameter controls the
12132 # number of lines in a page. The screen can display 25 lines max.
12133 # The Wyse-99GT also has personalities for the VT220 and
12134 # Tektronix 4014. But this has no bearing on the native mode.
12136 # (msgr) should be set but the clear screen fails when in
12137 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12138 # then set msgr, else use msgr@.
12140 # u0 -> enter Tektronix mode
12141 # u1 -> exit Tektronix mode
12143 wy99gt|wyse99gt|Wyse 99gt,
12145 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
12146 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
12147 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
12148 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`:$<150>, smcup=\Ew1,
12149 u0=\E~>\E8, u1=\E[42h, use=wy60,
12151 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
12152 cols#132, lw#7, nlab#16, wsl#97,
12153 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
12154 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
12157 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
12158 lh@, lines#25, lw@, nlab@,
12159 pln@, rs2=\E`:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
12161 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
12162 lh@, lines#25, lw@, nlab@,
12163 pln@, rs2=\E`;$<150>, use=wy99gt-w,
12165 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
12168 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
12169 bel@, use=wy99gt-w,
12171 # Can't set tabs! Other bugs (ANSI mode only):
12172 # - can't redefine function keys (anyway, key redefinition in ANSI mode
12173 # is too much complex to be described);
12174 # - meta key can't be described (the terminal forgets it when reset);
12175 # The xon-xoff handshaking can't be disabled while in ansi personality, so
12176 # emacs can't work at speed greater than 9600 baud. No padding is needed at
12178 # dch1 has been commented out because it causes annoying glittering when
12179 # vi deletes one character at the beginning of a line with tabs in it.
12180 # dch makes sysgen(1M) have a horrible behaviour when deleting
12181 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
12182 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
12183 # not, so smir and rmir are commented out as well.
12184 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12185 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
12186 am, km, mc5i, mir, msgr, xenl,
12187 cols#80, it#8, lines#25, vt#3,
12188 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
12189 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12190 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
12191 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
12192 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
12193 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
12194 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
12195 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
12196 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
12197 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
12198 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
12199 il1=\E[L, ind=\n$<1>, invis=\E[8m,
12200 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
12201 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
12202 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12203 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
12204 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
12205 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
12206 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
12207 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
12208 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
12209 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12210 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
12211 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
12212 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
12215 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
12216 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
12217 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
12218 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
12220 # This is the american terminal. Here tabs work fine.
12221 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12222 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
12223 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
12225 # This terminal (firmware version 02) has a lot of bugs:
12226 # - can't set tabs;
12227 # - other bugs in ANSI modes (see above).
12228 # This description disables handshaking when using cup. This is because
12229 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
12230 # cannot be used at speeds greater than 9600 baud, because at greater
12231 # speeds handshaking is needed even for character sending. If you use
12232 # DTR handshaking, you can use even greater speeds.
12233 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12234 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
12235 am, bw, hs, km, mc5i, mir, msgr, xon,
12236 cols#80, it#8, lines#25, wsl#46,
12237 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
12238 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
12239 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
12240 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12241 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
12242 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
12243 flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
12244 ind=\n, invis=\EG3,
12245 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
12246 \^0\E`1\E`4\Ee.\E`:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"
12248 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
12249 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
12250 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
12251 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
12252 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
12253 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12254 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
12255 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
12256 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
12257 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
12258 9\E\^0\E`1\E`4\Ee.\E`:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
12259 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
12260 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
12261 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
12263 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
12264 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
12266 # This is the american terminal. Here tabs work.
12267 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12268 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
12269 hts=\E1, tbc=\E0, use=wy99f,
12272 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
12273 # The reset strings are slow and the pad times very depending
12274 # on other parameters such as font loading. I have tried
12275 # to follow the following outline:
12277 # <rs1> -> set personality
12278 # <rs2> -> set number of columns
12279 # <rs3> -> set number of lines
12280 # <is1> -> select the proper font
12281 # <is2> -> do the initialization
12282 # <is3> -> set up display memory (2 pages)
12284 # The display memory may be used for either text or graphics.
12285 # When "Display Memory = Shared" the terminal will have more pages
12286 # but garbage may be left on the screen when you switch from
12287 # graphics to text. If "Display Memory = Unshared" then the
12288 # text area will be only one page long.
12290 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
12291 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12292 wy160|wyse160|Wyse 160,
12293 am, bw, hs, km, mc5i, mir, msgr,
12294 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
12295 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12296 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
12297 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12298 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
12299 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
12300 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
12301 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
12302 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12304 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12305 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12306 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12307 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12308 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12309 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12310 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12311 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
12312 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12313 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12314 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
12315 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
12316 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
12317 rs2=\E`:$<100>, rs3=\EwG\Ee($<140>,
12318 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12319 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12320 %{64}%|%;%?%p7%t%{1}%|%;%c,
12321 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12322 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12323 tbc=\E0, tsl=\EF, use=adm+sgr,
12325 wy160-w|wyse160-w|wyse 160 132-column,
12326 cols#132, lw#7, nlab#16, wsl#90,
12327 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
12328 rs2=\EeF$<150>\E`;$<150>, use=wy160,
12330 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
12331 lh@, lines#25, lw@, nlab@,
12332 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
12333 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
12334 lh@, lines#25, lw@, nlab@,
12335 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
12337 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
12339 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
12340 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
12341 rs3=\Ee*$<150>, use=wy160,
12342 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
12343 cols#132, lw#7, nlab#16, wsl#90,
12344 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
12345 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
12347 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
12348 lh@, lines#43, lw@, nlab@,
12349 pln@, rs3=\Ee+$<150>, use=wy160-42,
12350 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
12351 lh@, lines#43, lw@, nlab@,
12352 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
12354 wy160-vb|wyse160-vb|Wyse 160 visible bell,
12356 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
12359 # The Wyse 75 is a vt100 lookalike without advanced video.
12361 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
12362 # Underline) without magic cookies. The following description
12363 # uses this capability, but when more than one attribute is
12364 # put on the screen at once, all attributes will be changed
12365 # to be the same as the last attribute given.
12366 # The Wyse 75 can support more attributes when used with magic
12367 # cookies. The wy75-mc terminal description uses magic cookies
12368 # to correctly handle multiple attributes on a screen.
12370 wy75|wyse75|wyse 75,
12371 am, hs, mc5i, mir, msgr, xenl, xon,
12372 cols#80, lines#24, ma#1, pb#1201, wsl#78,
12373 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12374 bel=^G, cbt=\E[Z, clear=\E[H\E[J$<30>, cr=\r,
12375 csr=\E[%i%p1%d;%p2%dr$<2>, cub=\E[%p1%dD, cub1=^H,
12376 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12377 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12378 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[0t\E[2m,
12379 dl=\E[%p1%dM$<1*>, dl1=\E[M,
12380 dsl=\E[>\,\001\001\E[>-\001\001, ech=\E[%p1%dX,
12381 ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E)0,
12382 flash=\E[30h\E\,$<250/>\E[30l, fsl=^A, home=\E[H,
12383 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@$<1*>,
12384 il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, ip=$<1>,
12385 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
12386 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
12387 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
12388 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
12389 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
12390 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
12391 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
12392 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
12393 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
12394 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
12395 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
12396 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
12397 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
12399 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
12400 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
12402 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12403 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
12404 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+cvis,
12407 # This terminal description uses the non-hidden attribute mode
12408 # (with magic cookie).
12410 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
12413 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
12414 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
12415 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
12416 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
12418 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
12420 wy75-vb|wyse75-vb|wyse 75 with visible bell,
12423 wy75-w|wyse75-w|wyse 75 in 132 column mode,
12425 rs2=\E[35h\E[?3h$<80>, use=wy75,
12426 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
12430 # Wyse 85 emulating a vt220 7 bit mode.
12431 # 24 line screen with status line.
12433 # The vt220 mode permits more function keys but it wipes out
12434 # the escape key. I strongly recommend that <f11> be set to
12436 # The terminal may have to be set for 8 data bits and 2 stop
12437 # bits for the arrow keys to work.
12438 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
12439 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
12440 # <dch> leave trash on the screen when used without XON/XOFF.
12442 wy85|wyse85|wyse 85,
12443 am, hs, mc5i, mir, msgr, xenl, xon,
12444 cols#80, it#8, lines#24, wsl#80,
12445 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12446 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12447 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12448 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
12449 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
12450 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
12451 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
12452 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
12453 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
12454 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12455 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
12456 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
12457 ip=$<3>, is1=\E[62;1"p\E[?5W,
12458 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
12459 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12460 kcuf1=\E[C, kcuu1=\E[A, kf10=\E[21~, kf11=\E[23~,
12461 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
12462 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
12463 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
12464 kf9=\E[20~, khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2,
12465 lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8,
12466 rev=\E[7m, ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12467 rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p,
12468 rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7,
12469 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12470 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12471 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12472 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12473 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+vtedit,
12474 use=vt220+cvis, use=vt220+keypad,
12476 # Wyse 85 with visual bell.
12477 wy85-vb|wyse85-vb|wyse 85 with visible bell,
12478 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
12480 # Wyse 85 in 132-column mode.
12481 wy85-w|wyse85-w|wyse 85 in 132-column mode,
12483 rs2=\E[35h$<70/>\E[?3h, use=wy85,
12485 # Wyse 85 in 132-column mode with visual bell.
12486 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
12489 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
12490 # This copes with an apparent firmware bug in the wy85. He writes:
12491 # "What I did was change leave the terminal cursor keys set to Normal
12492 # (instead of application), and change \E[ to \233 for all the keys in
12493 # terminfo. At one point, I found some reference indicating that this
12494 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
12495 # me), but I can't find that and the server under my bookmark to "Wyse
12496 # Technical" isn't responding. So there's the question of whether the wy85
12497 # terminfo should reflect the manufacturer's intended behaviour of the terminal
12499 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
12500 am, hs, mc5i, mir, msgr, xenl, xon,
12501 cols#80, it#8, lines#24, wsl#80,
12502 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12503 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12504 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12505 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
12506 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
12507 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
12508 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
12509 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
12510 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
12511 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12512 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
12513 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
12514 ip=$<3>, is1=\E[62;1"p\E[?5W,
12515 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
12516 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
12517 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
12518 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
12519 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
12520 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
12521 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
12522 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
12523 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
12524 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
12525 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
12526 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
12527 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
12528 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
12529 rs3=\E[?5l, sc=\E7,
12530 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12531 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
12532 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12533 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12534 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+cvis,
12536 # Wyse 185 emulating a vt320 7 bit mode.
12538 # This terminal always displays 25 lines. These lines may be used
12539 # as 24 data lines and a terminal status line (top or bottom) or
12540 # 25 data lines. The 48 and 50 line modes change the page size
12541 # and not the number of lines on the screen.
12543 # The Compose Character key can be used as a meta key if changed
12546 wy185|wyse185|wyse 185,
12547 am, hs, km, mc5i, mir, msgr, xenl, xon,
12548 cols#80, it#8, lines#24, wsl#80,
12549 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12550 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12551 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12552 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
12553 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12554 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12555 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
12556 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
12557 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
12558 el=\E[K, el1=\E[1K, enacs=\E)0,
12559 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
12560 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
12561 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
12562 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
12563 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
12564 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12565 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
12566 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
12567 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
12568 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
12569 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12570 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
12571 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12572 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
12573 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
12574 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
12575 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
12576 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12577 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12578 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
12579 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
12580 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
12581 use=vt220+vtedit, use=vt220+keypad,
12583 # Wyse 185 with 24 data lines and top status (terminal status)
12584 wy185-24|wyse185-24|wyse 185 with 24 data lines,
12586 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12589 # Wyse 185 with visual bell.
12590 wy185-vb|wyse185-vb|wyse 185+flash,
12593 # Wyse 185 in 132-column mode.
12594 wy185-w|wyse185-w|wyse 185 in 132-column mode,
12596 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12597 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
12599 # Wyse 185 in 132-column mode with visual bell.
12600 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
12603 # wy325 terminfo entries
12604 # Done by Joe H. Davis 3-9-92
12606 # lines 25 columns 80
12608 wy325|wyse325|Wyse epc,
12609 am, bw, hs, mc5i, mir,
12610 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
12611 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12612 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
12613 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12614 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
12615 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
12616 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
12617 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
12618 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
12620 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12621 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12622 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12623 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12624 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12625 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
12626 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12627 mc0=\EP, mc4=^T, mc5=\Ed#,
12628 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12629 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12630 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
12631 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
12632 rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
12633 rs3=\EwG\Ee($<100>,
12634 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12635 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12636 %{64}%|%;%?%p7%t%{1}%|%;%c,
12637 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12638 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
12639 tsl=\EF, use=adm+sgr,
12642 # lines 24 columns 80 vb
12644 wy325-vb|wyse325-vb|wyse-325 with visual bell,
12648 # lines 24 columns 132
12650 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
12651 cols#132, lw#7, nlab#16, wsl#97,
12652 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
12653 rs2=\E`;$<70>, use=wy325,
12655 # lines 25 columns 80
12657 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
12658 lh@, lines#25, lw@, nlab@,
12659 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
12661 # lines 25 columns 132
12663 wy325-25w|wyse325-25w|wy325 132 columns,
12664 lh@, lines#25, lw@, nlab@,
12665 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
12667 # lines 25 columns 132 vb
12669 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
12673 # lines 42 columns 80
12675 wy325-42|wyse325-42|wyse-325 42 lines,
12676 lh@, lines#42, lw@, nlab@,
12677 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
12679 # lines 42 columns 132
12681 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
12682 lh@, lines#42, lw@, nlab@,
12683 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
12685 # lines 42 columns 132 vb
12687 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
12690 # lines 43 columns 80
12692 wy325-43|wyse325-43|wyse-325 43 lines,
12693 lh@, lines#43, lw@, nlab@,
12696 # lines 43 columns 132
12698 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
12699 lh@, lines#43, lw@, nlab@,
12700 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
12702 # lines 43 columns 132 vb
12704 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
12707 # Wyse 370 -- 24 line screen with status line.
12709 # The terminal may have to be set for 8 data bits and 2 stop
12710 # bits for the arrow keys to work.
12712 # If you change keyboards the terminal will send different
12713 # escape sequences.
12714 # The following definition is for the basic terminal without
12717 # <u0> -> enter Tektronix 4010/4014 mode
12718 # <u1> -> exit Tektronix 4010/4014 mode
12719 # <u2> -> enter ASCII mode (from any ANSI mode)
12720 # <u3> -> exit ASCII mode (goto native ANSI mode)
12721 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
12722 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
12724 # Bug: The <op> capability resets attributes.
12725 wy370-nk|wyse 370 without function keys,
12726 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
12727 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
12728 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12729 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12730 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12731 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12732 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12733 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
12734 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
12735 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
12736 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
12737 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
12738 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12739 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
12740 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
12742 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
12743 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
12744 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
12745 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
12747 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
12748 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
12749 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
12751 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
12752 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
12753 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
12754 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
12755 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
12756 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
12757 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
12758 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12759 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12760 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
12761 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
12762 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
12763 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
12764 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
12766 # Function key set for the ASCII (wy-50 compatible) keyboard
12767 # This is the default 370.
12769 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
12770 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12771 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
12772 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
12773 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
12774 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
12775 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
12776 knp=\E[U, kpp=\E[V, use=wy370-nk,
12778 # Function key set for the VT-320 (and wy85) compatible keyboard
12780 wy370-105k|Wyse 370 with 105 key keyboard,
12781 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12782 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
12783 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
12784 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~,
12785 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
12786 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
12787 lf4=PF4, use=vt220+vtedit, use=wy370-nk,
12790 # Function key set for the PC compatible keyboard
12792 wy370-EPC|Wyse 370 with 102 key keyboard,
12793 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12794 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
12795 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12796 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12797 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
12799 # Wyse 370 with visual bell.
12800 wy370-vb|Wyse 370 with visible bell,
12803 # Wyse 370 in 132-column mode.
12804 wy370-w|Wyse 370 in 132-column mode,
12806 rs2=\E[35h\E[?3h$<70>, use=wy370,
12808 # Wyse 370 in 132-column mode with visual bell.
12809 wy370-wvb|Wyse 370 with visible bell 132-columns,
12810 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
12811 wy370-rv|Wyse 370 reverse video,
12812 rs3=\E[32h\E[?5h, use=wy370,
12814 # Wyse 99gt Tektronix 4010/4014 emulator,
12816 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
12819 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
12820 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
12821 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
12822 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
12823 %{31}%&%{64}%+%c\037,
12825 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
12828 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
12830 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
12832 # Wyse 160 Tektronix 4010/4014 emulator,
12834 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
12835 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
12836 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
12837 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
12838 %{31}%&%{64}%+%c\037,
12839 home=^]8`g @\037, use=wy99gt-tek,
12841 # Wyse 370 Tektronix 4010/4014 emulator,
12843 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
12846 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
12847 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
12848 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
12849 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
12851 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
12854 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
12856 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
12857 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
12859 # Vendor-supplied Wyse entries end here.
12862 #TITLE: TERMINFO ENTRY WY520
12864 # The WY520 terminfo is based on the WY285 entry published on the WYSE
12865 # BBS with the addition of more function keys and special keys.
12867 # rs1 -> set personality
12868 # rs2 -> set number of columns
12869 # rs3 -> set number of lines
12870 # is1 -> select the proper font
12871 # is2 -> do the initialization
12872 # is3 -> If this string is empty then rs3 gets sent.
12874 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
12875 # - The BS key is programmed to generate BS in smcup since
12876 # is2 doesn't seem to work.
12877 # - Remove and shift/Remove: delete a character
12878 # - Insert : enter insert mode
12879 # - Find : delete to end of file
12880 # - Select : clear a line
12881 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
12883 # - Bottom status line (host writable line) is used.
12884 # - smkx,rmkx are removed because this would put the numeric
12885 # keypad in Dec application mode which doesn't seem to work
12886 # with SCO applications.
12888 wy520|wyse520|wyse 520,
12889 am, hs, km, mc5i, mir, xenl, xon,
12890 cols#80, it#8, lines#24, wsl#80,
12891 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12892 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12893 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12894 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
12895 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12896 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12897 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
12898 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
12899 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
12900 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
12901 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
12902 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
12903 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
12904 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12905 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[1~, kel=\E[4~,
12906 kent=\EOM, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
12907 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
12908 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
12909 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12910 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
12911 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12912 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
12913 rmso=\E[m, rmul=\E[24m,
12914 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
12915 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
12916 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12917 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12918 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
12919 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12920 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
12921 vpa=\E[%i%p1%dd, use=vt220+vtedit, use=vt220+keypad,
12923 # Wyse 520 with 24 data lines and status (terminal status)
12924 wy520-24|wyse520-24|wyse 520 with 24 data lines,
12926 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12929 # Wyse 520 with visual bell.
12930 wy520-vb|wyse520-vb|wyse 520 with visible bell,
12931 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
12933 # Wyse 520 in 132-column mode.
12934 wy520-w|wyse520-w|wyse 520 in 132-column mode,
12936 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12937 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
12939 # Wyse 520 in 132-column mode with visual bell.
12940 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
12941 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
12944 # Wyse 520 emulating a vt420 7 bit mode.
12945 # The DEL key is programmed to generate BS in is2.
12946 # With EPC keyboard.
12947 # - 'End' key will clear till end of line on EPC keyboard
12948 # - Shift/End : ignored.
12949 # - Insert : enter insert mode.
12950 # - Delete : delete a character (have to change interrupt character
12951 # to CTRL-C: stty intr '^c') for it to work since the
12952 # Delete key sends 7FH.
12953 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
12954 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
12955 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
12958 # Wyse 520 with 24 data lines and status (terminal status)
12959 # with EPC keyboard.
12960 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
12962 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12965 # Wyse 520 with visual bell.
12966 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
12967 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
12969 # Wyse 520 in 132-column mode.
12970 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
12972 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12973 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
12975 # Wyse 520 in 132-column mode with visual bell.
12976 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
12977 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
12979 # Wyse 520 in 80-column, 36 lines
12980 wy520-36|wyse520-36|wyse 520 with 36 data lines,
12983 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
12986 # Wyse 520 in 80-column, 48 lines
12987 wy520-48|wyse520-48|wyse 520 with 48 data lines,
12990 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
12993 # Wyse 520 in 132-column, 36 lines
12994 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
12997 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13000 # Wyse 520 in 132-column, 48 lines
13001 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
13004 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13008 # Wyse 520 in 80-column, 36 lines with EPC keyboard
13009 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
13012 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
13015 # Wyse 520 in 80-column, 48 lines with EPC keyboard
13016 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
13019 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
13022 # Wyse 520 in 132-column, 36 lines with EPC keyboard
13023 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
13026 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13029 # Wyse 520 in 132-column, 48 lines with EPC keyboard
13030 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
13033 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13036 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
13037 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
13038 # file and we don't know what <hts> is -- esr)
13039 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
13041 cols#80, it#8, lines#24,
13042 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
13043 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
13044 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
13045 is2=\E`:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
13046 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
13047 rmul=^O, rs1=\E`:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
13050 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
13051 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
13052 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13053 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
13056 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
13057 wy100q|Wyse 100 for Quotron,
13059 cols#80, lines#24, xmc#1,
13060 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
13061 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13062 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
13063 is2=\E`:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
13064 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
13066 #### Kermit terminal emulations
13068 # Obsolete Kermit versions may be listed in the section describing obsolete
13069 # non-ANSI terminal emulators later in the file.
13072 # KERMIT standard all versions.
13073 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13074 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13075 # From: greg small <gts@populi.berkeley.edu> 9-25-84
13076 kermit|standard kermit,
13079 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13080 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13081 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
13082 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
13083 kermit-am|standard kermit plus auto-margin,
13085 is2=K1 Standard Kermit plus Automatic Margins\n,
13087 # IBMPC Kermit 1.2.
13088 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
13089 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
13091 # From: greg small <gts@populi.berkeley.edu> 8-30-84
13092 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
13095 clear=\EH\EJ, ed@, el@,
13096 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
13097 # IBMPC Kermit 1.20
13098 # Cannot use line 25, now acts funny like ansi special scrolling region.
13099 # Initialization must escape from that region by cursor position to line 24.
13100 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
13101 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
13102 # From: greg small <gts@populi.berkeley.edu> 12-19-84
13103 pckermit120|UCB IBMPC Kermit 1.20,
13105 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
13107 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
13109 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
13110 # MS-DOS Kermit 2.27 for the IBMPC
13111 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13112 # Cannot use line 25, now acts funny like ansi special scrolling region.
13113 # Initialization must escape from that region by cursor position to line 24.
13114 # Does not use am: because autowrap is lost when kermit dropped and restarted.
13115 # Reverse video for standout like H19.
13116 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13117 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13118 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
13120 cols#80, it#8, lines#24,
13121 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13122 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
13123 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
13124 home=\EH, ht=^I, il1=\EL,
13125 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
13126 \sIBMPC\s3-17-85\n,
13127 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
13128 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
13129 # MS-DOS Kermit 2.27 with automatic margins
13130 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13131 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
13133 cvvis=\EO\Eq\EG\EvK5,
13134 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
13135 \smargins\s3-17-85\n,
13137 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
13138 # Automatic margins now default. Use ansi <sgr> for highlights.
13139 # Define function keys.
13140 # (msk22714: removed obsolete ":kn#10:" -- esr)
13141 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13142 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
13144 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
13145 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
13146 \sIBM\sPC\s3-17-85\n,
13147 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
13148 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13149 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
13150 # This was designed for a VT320 emulator, but it is probably a good start
13151 # at support for the VT320 itself.
13152 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
13153 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
13154 vt320-k3|MS-Kermit 3.00's vt320 emulation,
13155 am, eslok, hs, km, mir, msgr, xenl,
13156 cols#80, it#8, lines#49, pb#9600, vt#3,
13157 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13158 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cmdch=\E,
13159 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13160 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13161 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13162 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13163 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
13164 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
13166 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
13167 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13168 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
13169 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
13170 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
13171 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
13172 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
13173 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
13174 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
13175 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
13176 \E[4i\E[?4i\E[m\E[r\E[2$~,
13177 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
13178 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13179 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, use=vt220+cvis,
13181 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
13182 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
13183 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
13184 vt320-k311|dec vt320 series as defined by kermit 3.11,
13185 am, eslok, hs, mir, msgr, xenl, xon,
13186 cols#80, it#8, lines#24, vt#3,
13187 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13188 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=\r,
13189 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13190 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13191 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13192 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13193 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
13194 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
13195 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
13197 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
13198 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13199 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
13200 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
13201 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
13202 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
13203 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
13204 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
13205 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
13206 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
13209 ######## NON-ANSI TERMINAL EMULATIONS
13214 # These entries attempt to describe Avatar, a terminal emulation used with
13215 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
13216 # capabilities, but with cheaper (shorter) control sequences. Messy design,
13217 # excessively dependent on PC idiosyncrasies, but apparently rather popular
13218 # in the BBS world.
13220 # No color support. Avatar doesn't fit either of the Tektronix or HP color
13221 # models that terminfo knows about. An Avatar color attribute is the
13222 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
13224 # I wrote these entries while looking at the Avatar spec. I don't have
13225 # the facilities to test them. Let me know if they work, or don't.
13227 # Avatar escapes not used by these entries (because maybe you're smarter
13228 # and more motivated than I am and can figure out how to wrap terminfo
13229 # around some of them, and because they are weird enough to be funny):
13231 # ^L -- clear window/reset current attribute to default
13232 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
13234 # bit: 6 5 4 3 2 1 0
13236 # +---+---+ | +---+---+
13238 # | | foreground color
13239 # | foreground intensity
13242 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
13243 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
13244 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
13245 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
13246 # (^V^L and ^V^M set the current attribute as a side-effect.)
13247 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
13248 # in the pattern, <c> the number of times the pattern
13249 # should be repeated. If either value is 0, no-op.
13250 # The pattern can contain Avatar console codes,
13251 # including other ^V ^Y patterns.
13253 # ^V^O -- clockwise mode on; turn print direction right each time you
13254 # hit a window edge (yes, really). Turned off by CR
13256 # ^V^Q%c -- query the driver
13257 # ^V^R -- driver reset
13258 # ^V^S -- Sound tone (PC-specific)
13259 # ^V^T -- change highlight at current cursor position to %c
13260 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
13261 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
13264 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13265 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
13266 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
13267 # which is the only method that will actually work for multiple highlights.)
13269 # Update by TD - 2004: half of this was inconsistent. Found documentation
13270 # and repaired most of the damage. sgr0 is probably incorrect, but the
13271 # available documentation gives no clues for a workable string.
13272 avatar0|avatar terminal emulator level 0,
13274 cols#80, it#8, lines#25,
13275 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
13276 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
13277 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
13279 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
13280 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
13281 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
13282 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
13284 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13285 avatar0+|avatar terminal emulator level 0+,
13286 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
13287 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13288 avatar|avatar1|avatar terminal emulator level 1,
13289 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
13290 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
13294 # RBComm is a lean and mean terminal emulator written by the Interrupt List
13295 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
13296 # '90s), especially in the BBS world, and still has some loyal users due to
13297 # its very small memory footprint and to a cute macro language.
13298 rbcomm|IBM PC with RBcomm and EMACS keybindings,
13299 am, bw, mir, msgr, xenl,
13300 cols#80, it#8, lines#25,
13301 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=^L, cr=\r,
13302 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^C, cuf1=^B,
13303 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
13304 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
13305 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
13306 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
13307 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
13308 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
13309 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
13310 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
13311 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
13313 rbcomm-nam|IBM PC with RBcomm without autowrap,
13315 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
13316 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
13317 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
13318 rbcomm-w|IBM PC with RBcomm in 132 column mode,
13320 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
13321 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
13322 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
13324 ######## LCD DISPLAYS
13327 #### Matrix Orbital
13328 # from: Eric Z. Ayers (eric@ale.org)
13330 # Matrix Orbital 20x4 LCD display
13331 # Command Character is 0xFE (decimal 254, octal 376)
13333 # On this device, cursor addressability isn't possible. The LCD expects:
13334 # 0xfe G <col> <row>
13335 # for cup: %p1 == row and %p2 is column
13338 # cup=\376G%p2%c%p1%c
13339 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
13340 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
13342 # Alas, there is no cursor upline capability on this display.
13344 # These entries add some 'sanity stuff' to the clear function. That is, it
13345 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
13346 # and turns off the cursor blinking and stuff like that.
13348 # NOTE: calling 'beep' turns on the backlight (bell)
13349 # NOTE: calling 'flash' turns it on and back off (visual bell)
13351 MtxOrb|Generic Matrix Orbital LCD display,
13352 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
13353 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
13354 flash=\376B\001$<200>\376F, home=\376H,
13355 MtxOrb204|20x4 Matrix Orbital LCD display,
13356 cols#20, lines#4, use=MtxOrb,
13357 MtxOrb162|16x2 Matrix Orbital LCD display,
13358 cols#16, lines#2, use=MtxOrb,
13361 ######## OLDER TERMINAL TYPES
13363 # This section is devoted to older commercial terminal brands that are now
13364 # discontinued, but known to be still in use or represented by emulations.
13367 #### AT&T (att, tty)
13369 # This section also includes Teletype-branded VDTs.
13371 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
13372 # Boundless Technologies); for details, see the header comment on the ADDS
13375 # These are AT&T's official terminfo entries. All-caps aliases have been
13378 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
13379 am, eo, mir, msgr, xon,
13380 cols#80, it#8, lines#24,
13381 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
13382 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13383 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13384 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13385 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
13386 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
13387 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13388 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
13389 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
13390 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
13391 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
13392 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
13393 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
13395 att2350|AT&T 2350 Video Information Terminal 80 column mode,
13396 mc0@, mc4@, mc5@, use=att2300,
13398 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
13399 # Seems upward compatible with vt100, plus ins/del line/char.
13400 # On sgr, the protection parameter is ignored.
13401 # No check is made to make sure that only 3 parameters are output.
13402 # standout= reverse + half-intensity = 3 | 5.
13403 # bold= reverse + underline = 2 | 3.
13404 # note that half-bright blinking doesn't look different from normal blinking.
13405 # NOTE:you must program the function keys first, label second!
13406 # (att4410: a BSD entry has been seen with the following capabilities:
13407 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
13408 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
13409 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
13410 am, hs, mir, msgr, xon,
13411 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13412 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
13414 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
13415 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
13416 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
13417 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
13418 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
13419 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
13420 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
13421 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
13422 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
13423 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
13424 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
13426 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13427 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
13428 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
13429 ll=\E[24H, nel=\r\n,
13430 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
13432 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
13433 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
13435 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13436 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13437 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
13438 tsl=\E7\E[25;%p1%{1}%+%dH,
13440 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
13442 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
13444 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
13446 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
13449 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
13451 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
13453 # 5410 in terms of a vt100
13454 # (v5410: added <rmam>/<smam> based on init string -- esr)
13455 v5410|att5410 in terms of a vt100,
13456 am, mir, msgr, xon,
13457 cols#80, it#8, lines#24, vt#3,
13458 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13459 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13460 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
13461 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
13462 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
13463 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
13464 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
13465 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
13466 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
13467 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
13468 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13470 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
13471 %;m%?%p9%t\016%e\017%;$<2>,
13472 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13473 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13477 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
13478 # even! the 5420 has three modes: scroll, window or page mode
13479 # this terminfo should work in scroll or window mode, but doesn't
13480 # take advantage of any of the differences between them.
13482 # Has memory below (2 lines!)
13483 # 3 pages of memory (plus some spare)
13484 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
13485 # <hpa>, <hts> would work for these, but these work in both scroll and window
13486 # mode... Unset insert character so insert mode works
13487 # <is1> sets 80 column mode,
13488 # <is2> escape sequence:
13489 # 1) turn off all fonts
13490 # 2) function keys off, keyboard lock off, control display off,
13491 # insert mode off, erasure mode off,
13492 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
13493 # 4) reset origin mode
13494 # 5) set line wraparound
13495 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
13497 # 8) program ENTER to transmit ^J,
13498 # We use \212 to program the ^J because a bare ^J will get translated by
13499 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
13501 # <is3> set screen color to black,
13502 # No representation in terminfo for the delete word key: kdw1=\Ed
13503 # Key capabilities assume the power-up send sequence...
13504 # This <rmcup> is not strictly necessary, but it helps maximize
13505 # memory usefulness: <rmcup=\Ez>,
13506 # Alternate sgr0: <sgr0=\E[m\EW^O>,
13507 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
13508 # smkx programs the SYS PF keys to send a set sequence.
13509 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
13510 # This string causes them to send the strings <kf1>-<kf8>
13511 # when pressed in SYS PF mode.
13512 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
13513 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
13514 OTbs, db, mir, xon,
13515 lh#2, lm#78, lw#8, nlab#8, wsl#55,
13516 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
13517 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
13518 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
13519 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
13520 flash=\E[?5h$<200>\E[?5l, home=\E[x,
13521 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
13522 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
13523 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
13524 \E[4i\Ex\E[21;1j\212,
13525 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
13526 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
13527 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
13528 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
13529 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
13530 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
13531 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
13532 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
13533 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
13534 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
13535 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
13536 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13537 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
13538 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
13539 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
13540 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
13543 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
13544 cols#132, lm#54, wsl#97,
13545 is1=\E[?3h$<100>, use=att4415,
13547 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
13548 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
13550 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
13551 cols#132, lm#54, wsl#97,
13552 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
13555 # Note that this mode permits programming USER PF KEYS and labels
13556 # However, when you program user pf labels you have to reselect
13557 # user pf keys to make them appear!
13558 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
13559 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
13560 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13562 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
13564 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
13565 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13568 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
13569 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13572 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
13573 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13576 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
13577 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13580 att5420_2|AT&T 5420 model 2 80 cols,
13581 am, db, hs, mir, msgr, xon,
13582 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
13583 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13584 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
13585 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13586 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
13587 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
13588 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13589 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
13590 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
13591 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
13592 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13593 indn=\E[%p1%dE, invis=\E[8m,
13594 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
13595 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
13597 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
13598 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
13599 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
13600 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
13601 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
13602 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
13603 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
13604 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
13605 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
13607 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
13608 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
13609 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
13611 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
13612 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
13613 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
13614 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13615 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
13616 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
13618 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
13619 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
13623 att4418|att5418|AT&T 5418 80 cols,
13626 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13627 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
13628 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
13629 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
13630 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
13631 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
13632 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
13633 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
13634 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
13635 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
13636 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
13637 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
13638 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
13639 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
13640 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
13641 att4418-w|att5418-w|AT&T 5418 132 cols,
13643 is1=\E[?3h, use=att5418,
13645 att4420|tty4420|teletype 4420,
13646 OTbs, da, db, eo, msgr, ul, xon,
13647 cols#80, lines#24, lm#72,
13648 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
13649 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
13650 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
13651 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
13652 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
13653 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
13654 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
13655 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
13657 # The following is a terminfo entry for the Teletype 4424
13658 # asynchronous keyboard-display terminal. It supports
13659 # the vi editor. The terminal must be set up as follows,
13661 # HIGHLIGHT DEFINITION 3-TONE
13662 # DISPLAY FUNCTION GROUP III
13664 # The second entry below provides limited (a la adm3a)
13665 # operation under GROUP II.
13667 # This must be used with DISPLAY FUNCTION GROUP I or III
13668 # and HIGHLIGHT DEFINITION 3-TONE
13669 # The terminal has either bold or blink, depending on options
13671 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
13672 att4424|tty4424|teletype 4424,
13675 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13676 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
13677 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13678 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
13679 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
13680 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
13681 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
13682 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
13683 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13684 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
13685 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
13687 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
13688 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
13689 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
13692 att4424-1|tty4424-1|teletype 4424 in display function group I,
13693 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
13696 # This entry is not one of AT&T's official ones, it was translated from the
13697 # 4.4BSD termcap file. The highlight strings are different from att4424.
13698 # I have no idea why this is -- older firmware version, maybe?
13699 # The following two lines are the comment originally attached to the entry:
13700 # This entry appears to avoid the top line - I have no idea why.
13701 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
13702 att4424m|tty4424m|teletype 4424M,
13704 cols#80, it#8, lines#23,
13705 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
13706 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
13707 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
13708 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
13709 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13710 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
13711 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13713 # The Teletype 5425 is really version 2 of the Teletype 5420. It
13714 # is quite similar, except for some minor differences. No page
13715 # mode, for example, so all of the <cup> sequences used above have
13716 # to change back to what's being used for the 5410. Many of the
13717 # option settings have changed their numbering as well.
13719 # This has been tested on a preliminary model.
13721 # (att5425: added <rmam>/<smam> based on the init string -- esr)
13722 att5425|tty5425|att4425|AT&T 4425/5425,
13723 am, da, db, hs, mir, msgr, xenl, xon,
13724 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
13725 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13726 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13727 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
13728 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13729 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13730 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13731 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13732 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
13733 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
13734 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
13735 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13736 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
13737 invis=\E[8m, is1=\E<\E[?3l$<100>,
13738 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
13739 \E[4i\Ex\E[25;1j\212,
13740 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
13741 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13742 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
13743 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
13744 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
13745 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
13747 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13748 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
13749 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
13750 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
13751 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
13752 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
13753 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
13754 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13755 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
13756 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
13757 vpa=\E[%p1%{1}%+%dd,
13759 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
13760 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
13762 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
13763 cols#132, lm#54, wsl#97,
13764 is1=\E[?3h$<100>, use=tty5425,
13766 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
13767 # I also added <rmam>/<smam> -- esr)
13768 att4426|tty4426|teletype 4426S,
13770 cols#80, lines#24, lm#48,
13771 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13772 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
13773 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
13774 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13775 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
13776 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
13777 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
13778 il=\E[%p1%dL, il1=\EL, ind=\n, is1=\Ec\E[?7h,
13779 is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED,
13780 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ,
13781 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
13782 khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n, rc=\E8,
13783 rev=\E[7m, ri=\ET, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m,
13784 rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B,
13785 smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
13786 vpa=\E[%p1%dd, use=ecma+index,
13788 # Terminfo entry for the AT&T 510 A Personal Terminal
13789 # Function keys 9 - 16 are available only after the
13790 # screen labeled (soft keys/action blocks) are labeled. Function key
13791 # 9 corresponds to the leftmost touch target on the screen,
13792 # function key 16 corresponds to the rightmost.
13794 # This entry is based on one done by Ernie Rice at Summit, NJ and
13795 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
13796 att510a|bct510a|AT&T 510A Personal Terminal,
13797 am, mir, msgr, xenl, xon,
13798 cols#80, lh#2, lines#24, lw#7, nlab#8,
13799 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
13800 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13801 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
13802 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13803 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13804 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
13805 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
13806 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
13807 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
13808 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
13809 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
13810 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
13811 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
13812 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
13813 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
13814 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
13815 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
13816 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
13817 %|%t;7%;m%?%p9%t\016%e\017%;,
13818 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
13819 smul=\E[4m, tbc=\E[3g,
13821 # Terminfo entry for the AT&T 510 D Personal Terminal
13822 # Function keys 9 through 16 are accessed by bringing up the
13824 # Function key 9 corresponds to the leftmost touch target on the screen,
13825 # function key 16 corresponds to the rightmost.
13827 # There are problems with soft key labeling. These are due to
13828 # strangenesses in the native terminal that are impossible to
13829 # describe in a terminfo.
13830 att510d|bct510d|AT&T 510D Personal Terminal,
13831 am, da, db, mir, msgr, xenl, xon,
13832 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
13833 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
13834 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13835 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
13836 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
13837 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
13838 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
13839 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
13840 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
13841 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13842 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
13843 is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u,
13844 kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
13845 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe,
13846 kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj,
13847 kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
13848 kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i,
13849 mc4=\E[?8i, mc5=\E[?4i, mgc=\E:, nel=\EE,
13850 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
13851 rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m,
13852 rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
13853 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
13854 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13855 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
13856 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
13857 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
13858 use=ansi+rep, use=ecma+index,
13860 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
13861 att500|att513|AT&T 513 using page mode,
13862 am, chts, mir, msgr, xenl, xon,
13863 cols#80, lh#2, lines#24, lw#8, nlab#8,
13864 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
13865 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13866 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
13867 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13868 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13869 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13870 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
13871 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13872 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13873 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13874 indn=\E[%p1%dE, invis=\E[8m,
13875 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
13876 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13877 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13878 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
13879 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
13880 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
13881 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
13882 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
13883 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13884 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
13885 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
13886 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
13887 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
13888 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
13889 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
13890 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
13891 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
13892 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
13894 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13896 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13898 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
13899 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
13900 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
13901 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
13903 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
13904 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
13905 rs2=\E[5;0|, sc=\E7,
13906 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13907 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13908 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
13909 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
13910 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
13913 # printer must be set to EMUL ANSI to accept ESC codes
13914 # <cuu1> stops at top margin
13915 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
13916 # and alt font ascii,wrap on,tabs cleared
13917 # <is2> disables newline on LF,Emphasized off
13918 # The <u0> capability sets form length
13919 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
13921 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
13922 orhi#100, orl#12, orvi#72,
13923 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
13924 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
13925 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
13928 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
13929 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
13930 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
13931 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
13932 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
13933 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
13935 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
13936 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
13937 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
13938 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
13940 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
13941 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
13942 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
13943 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
13944 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
13946 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
13947 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
13948 u0=\E[%p1%dt, vpa=\E[%p1%dd,
13950 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
13951 # The following SET-UP modes are assumed for normal operation:
13952 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
13953 # Other SET-UP modes may be set for operator convenience or communication
13954 # requirements. This termcap description is for the Resident Terminal Mode.
13955 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13956 # The BRL entry also said: UNSAFE :ll=\E[70H:
13957 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
13959 cols#88, it#8, lines#70, vt#3,
13960 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
13961 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
13962 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
13963 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
13964 il1=\E[L, ind=\n, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
13965 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\r\n,
13966 rc=\E8, ri=\E[T, rs1=\Ec, sc=\E7, use=ecma+index,
13968 # 5620 terminfo (2.0 or later ROMS with char attributes)
13969 # The following SET-UP modes are assumed for normal operation:
13970 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
13971 # Other SET-UP modes may be set for operator convenience or communication
13972 # requirements. This termcap description is for Resident Terminal Mode. No
13973 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13974 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
13975 # Be aware that older versions of the dmd have a firmware bug that affects
13976 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
13977 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
13978 # also has <ll>=\E[70H commented out and marked unsafe.
13979 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
13980 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
13981 OTbs, am, msgr, npc, xon,
13982 cols#88, it#8, lines#70,
13983 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
13984 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13985 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
13986 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
13987 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kbs=^H,
13988 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13989 khome=\E[H, kll=\E[70;1H, nel=\n,
13990 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
13991 rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m,
13992 smso=\E[7m, smul=\E[4m, use=ecma+index,
13993 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
13994 lines#24, use=att5620,
13995 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
13996 lines#34, use=att5620,
13997 # 5620 layer running the "S" system's downloaded graphics handler:
13998 att5620-s|tty5620-s|layer|vitty|5620 S layer,
14000 cols#80, it#8, lines#72,
14001 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
14002 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
14003 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
14004 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
14007 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
14009 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
14010 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
14011 att605|AT&T 605 80 column 102key keyboard,
14013 cols#80, lines#24, lw#8, nlab#8, wsl#80,
14014 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14015 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14016 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
14017 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
14018 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
14019 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
14020 il1=\E[L, ind=\n, invis=\E[8m,
14021 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
14022 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
14023 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14024 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
14025 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
14026 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
14027 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
14028 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
14029 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
14030 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
14031 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
14032 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
14033 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
14034 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
14035 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14036 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14037 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14038 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
14039 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
14040 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
14041 tsl=\E7\E[25;%i%p1%dx,
14042 att605-pc|ATT 605 in pc term mode,
14043 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
14045 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
14046 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
14047 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14048 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
14049 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
14050 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
14051 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
14052 xoffc=g, xonc=e, use=att605,
14053 att605-w|AT&T 605-w 132 column 102 key keyboard,
14055 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
14056 # (att610: I added <rmam>/<smam> based on the init string. I also
14057 # added <indn> and <rin> because the BSD file says the att615s have them,
14058 # and the 615 is like a 610 with a big keyboard, and most of their other
14059 # smart terminals support the same sequence -- esr)
14060 att610|AT&T 610; 80 column; 98key keyboard,
14061 am, eslok, hs, mir, msgr, xenl, xon,
14062 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14063 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14064 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14065 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14066 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14067 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14068 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14069 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14070 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
14071 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14073 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
14074 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
14075 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14076 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14077 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
14078 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14079 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
14081 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14082 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14083 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p,
14084 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
14085 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14086 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14087 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14088 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
14089 use=ecma+index, use=att610+cvis0,
14090 att610-w|AT&T 610; 132 column; 98key keyboard,
14092 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14095 att610-103k|AT&T 610; 80 column; 103key keyboard,
14096 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14097 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14098 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14099 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14100 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14101 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14102 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14103 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
14104 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
14105 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
14106 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
14107 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
14108 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
14109 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
14111 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14113 att615|AT&T 615; 80 column; 98key keyboard,
14114 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14115 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14116 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14117 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14118 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14119 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14120 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
14121 att615-w|AT&T 615; 132 column; 98key keyboard,
14122 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14123 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14124 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14125 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14126 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14127 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14128 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
14129 att615-103k|AT&T 615; 80 column; 103key keyboard,
14130 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
14131 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
14132 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
14133 # (att620: I added <rmam>/<smam> based on the init string and
14134 # <rin>/<indn> from a BSD termcap -- esr)
14135 att620|AT&T 620; 80 column; 98key keyboard,
14136 am, eslok, hs, mir, msgr, xenl, xon,
14137 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14138 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14139 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14140 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14141 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14142 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14143 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14144 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14145 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
14146 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14148 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
14149 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
14150 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14151 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14152 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14153 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
14154 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
14155 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
14156 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
14157 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
14158 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
14159 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
14160 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
14161 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14162 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14163 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14164 ri=\EM, rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l,
14165 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
14166 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14167 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
14168 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
14169 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
14170 tsl=\E7\E[25;%i%p1%dx, use=ecma+index,
14172 att620-w|AT&T 620; 132 column; 98key keyboard,
14174 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14176 att620-103k|AT&T 620; 80 column; 103key keyboard,
14177 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14178 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14179 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14180 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14181 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14182 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14183 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14184 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
14185 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
14186 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
14187 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
14188 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
14189 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
14190 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
14191 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
14192 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
14194 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
14196 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14199 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
14200 # The following SETUP modes are assumed for normal operation:
14201 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
14202 # Font_Size=Large Non-Layers_Window_Cols=80
14203 # Non-Layers_Window_Rows=60
14204 # Other SETUP modes may be set for operator convenience or communication
14205 # requirements. Some capabilities assume a printer attached to the Aux EIA
14206 # port. This termcap description is for the Fixed Non-Layers Window. No
14207 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14208 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
14209 att630|AT&T 630 windowing terminal,
14210 OTbs, am, da, db, mir, msgr, npc, xon,
14211 cols#80, it#8, lines#60, lm#0,
14212 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
14213 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14214 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14215 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14216 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
14217 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
14218 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[m, kbs=^H, kcbt=\E[Z,
14219 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14220 kdch1=\E[P, kdl1=\E[M, kent=\r, kf10=\ENp, kf11=\ENq,
14221 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv,
14222 kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{,
14223 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf9=\ENo, khome=\E[H,
14224 kich1=\E[@, kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, nel=\r\n,
14225 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM,
14226 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7,
14227 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
14229 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14231 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
14232 lines#24, use=att630,
14234 # This is the att700 entry for 700 native emulation of the AT&T 700
14235 # terminal. Comments are relative to changes from the 605V2 entry and
14236 # att730 on which the entry is based. Comments show the terminfo
14237 # capability name, termcap name, and description.
14239 # Here is what's going onm in the init string:
14240 # ESC [ 50;4| set 700 native mode (really is 605)
14241 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
14242 # ESC [ 53;0| set GenFlow to Xon/Xoff
14243 # ESC [ 8 ;0| set CR on NL
14244 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
14245 # ESC [ ? 4 l jump scroll
14246 # ESC [ ? 5 l/h video: normal (l); reverse (h)
14247 # ESC [ ?13 l Labels on
14248 # ESC [ ?15 l parity check = no
14249 # ESC [ 13 l monitor mode off
14250 # ESC [ 20 l LF on NL (not CRLF on NL)
14251 # ESC [ ? 7 h autowrap on
14252 # ESC [ 12 h local echo off
14253 # ESC ( B GO = ASCII
14254 # ESC ) 0 G1 = Special Char & Line Drawing
14255 # ESC [ ? 31 l Set 7 bit controls
14257 # Note: Most terminals, especially the 600 family use Reverse Video for
14258 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
14259 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
14260 # standout mode with \E[m (all normal attributes). The 730 entry simply
14261 # exits reverse video which would leave other current attributes intact. It
14262 # was assumed the 730 entry to be more correct so rmso has changed. The
14263 # 605V2 has no sequences to turn individual attributes off, thus its setting
14264 # and the rmso/smso settings from the 730.
14266 # Note: For the same reason as above in rmso I changed exit under-score mode
14267 # to specifically turn off underscore, rather than return to all normal
14270 # Note: The following pkey_xmit is taken from the 605V2 which contained the
14271 # capability as pfxl. It was changed here to pfx since pfxl
14272 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
14273 # allows strings to be parameters and label values must be programmed as
14274 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
14275 # and strings to be parameters. The 605V2 pfx entry should be examined later
14276 # in this regard. For reference the 730 pfxl entry is shown here for comparison
14278 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
14279 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14282 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14285 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14287 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
14291 # modular 10 pin Connector
14292 # Left side Right side
14293 # Pin 1 2 3 4 5 6 7 8 9 10
14295 # Key (notch) at bottom
14307 # The manual is 189 pages and is loaded with details about the escape codes,
14308 # etc..... Available from AT&T CIC 800-432-6600...
14309 # ask for Document number 999-300-660..
14311 att700|AT&T 700 24x80 column display w/102key keyboard,
14312 am, eslok, hs, mir, msgr, xenl, xon,
14313 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14314 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14315 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14316 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14317 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14318 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14319 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14320 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14321 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
14322 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14323 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
14324 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
14325 \E(B\E)0\E[?31l\E[0m\017,
14326 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
14327 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14328 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
14329 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
14330 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
14331 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
14332 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
14333 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
14334 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
14335 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14336 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
14337 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14338 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
14339 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14340 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
14341 \s\s\s\s\s\s%;%p2%s,
14342 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14343 ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m,
14344 rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|,
14346 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14347 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14348 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
14349 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
14350 tsl=\E7\E[99;%i%p1%dx, use=ansi+rep, use=att610+cvis0,
14352 # This entry was modified 3/13/90 by JWE.
14353 # fixes include additions of <enacs>, correcting <rep>, and modification
14354 # of <kHOM>. (See comments below)
14355 # att730 has status line of 80 chars
14356 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
14357 # the <kf25> and up keys are used for shifted system Fkeys
14358 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
14359 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
14360 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
14361 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
14362 # 102, 102+1, or 122 key keyboards
14364 # (att730: I added <rmam>/<smam> based on the init string -- esr)
14365 att730|AT&T 730 windowing terminal,
14366 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
14367 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
14368 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14369 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14370 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14371 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14372 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14373 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14374 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14375 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
14376 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
14377 ind=\ED, invis=\E[8m,
14378 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
14379 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
14380 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14381 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14382 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
14383 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
14384 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
14385 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
14386 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
14387 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
14388 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
14389 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
14390 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14391 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
14392 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14393 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
14394 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14395 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
14396 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14397 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h,
14398 rmso=\E[27m, rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l,
14400 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14401 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14402 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14403 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
14404 swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=ansi+rep,
14406 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
14407 lines#41, use=att730,
14408 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
14409 lines#24, use=att730,
14410 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
14411 flash=\E[?5l$<200>\E[?5h,
14412 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
14413 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
14414 lines#41, use=att730r,
14415 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
14416 lines#24, use=att730r,
14418 # The following represents the screen layout along with the associated
14419 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
14420 # not appear on the screen but are shown to reference the bezel buttons.
14421 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
14422 # position relative to the screen.
14426 # +----------------------------------------------------------------+
14428 # XXXX | kf0 kf24 | XXXX
14431 # XXXX | kf1 kf23 | XXXX
14434 # XXXX | kf2 kf22 | XXXX
14437 # XXXX | kf3 kf21 | XXXX
14440 # XXXX | kf4 kf20 | XXXX
14443 # XXXX | kf5 kf19 | XXXX
14446 # XXXX | kf6 kf18 | XXXX
14452 # +----------------------------------------------------------------+
14454 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
14456 # Note: XXXX represents the screen buttons
14462 # The character string sent by key 'kf26' may be user programmable
14463 # to send either \E[16s, or \E[26s.
14464 # The character string sent by key 'krfr' may be user programmable
14465 # to send either \E[17s, or \E[27s.
14467 # Depression of the "CMD" key sends \E! (kcmd)
14468 # Depression of the "MAIL" key sends \E[26s (kf26)
14469 # "REDRAW" same as "REFRESH" (krfr)
14471 # "kf" functions adds carriage return to output string if terminal is in
14474 # The following are functions not covered in the table above:
14476 # Set keyboard character (SKC): \EPn1;Pn2w
14477 # Pn1= 0 Back Space key
14479 # Pn2= Program char (hex)
14481 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
14482 # Pn1= Window number (1-39)
14483 # Pn2-Pn5= Y;X;Y;X coordinates
14485 # Screen Selection (SSL): \E[Pnu
14486 # Pn= Window number
14488 # Set Terminal Modes (SM): \E[Pnh
14489 # Pn= 3 Graphics mode
14490 # Pn= > Cursor blink
14491 # Pn= < Enter new line mode
14492 # Pn= = Enter reverse insert/replace mode
14493 # Pn= ? Enter no scroll mode
14495 # Reset Terminal Mode (RM): \E[Pnl
14496 # Pn= 3 Exit graphics mode
14497 # Pn= > Exit cursor blink
14498 # Pn= < Exit new line mode
14499 # Pn= = Exit reverse insert/replace mode
14500 # Pn= ? Exit no scroll mode
14502 # Screen Status Report (SSR): \E[Pnp
14503 # Pn= 0 Request current window number
14504 # Pn= 1 Request current window dimensions
14506 # Device Status Report (DSR): \E[6n Request cursor position
14508 # Call Status Report (CSR): \E[Pnv
14509 # Pn= 0 Call failed
14510 # Pn= 1 Call successful
14512 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
14513 # Pn1= Button number to be loaded
14514 # Pn2= Character count of "string"
14515 # Pn3= Key mode being loaded:
14519 # String= Text string (15 chars max)
14521 # Screen Number Report (SNR): \E[Pnp
14522 # Pn= Screen number
14524 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
14525 # Pn1= Number of rows available in window
14526 # Pn2= Number of columns available in window
14528 # Cursor Position Report (CPR): \E[Pn1;Pn2R
14529 # Pn1= "Y" Position of cursor
14530 # Pn2= "X" Position of cursor
14532 # Request Answer Back (RAB): \E[c
14534 # Answer Back Response (ABR): \E[?;*;30;VSV
14535 # *= 0 No printer available
14536 # *= 2 Printer available
14537 # V= Software version number
14538 # SV= Software sub version number
14539 # (printer-available field not documented in v1)
14541 # Screen Alignment Aid: \En
14543 # Bell (lower pitch): \E[x
14545 # Dial Phone Number: \EPdstring\
14546 # string= Phone number to be dialed
14548 # Set Phone Labels: \EPpstring\
14549 # string= Label for phone buttons
14551 # Set Clock: \EPchour;minute;second\
14553 # Position Clock: \EPsY;X\
14554 # Y= "Y" coordinate
14555 # X= "X" coordinate
14557 # Delete Clock: \Epr\
14559 # Programming The Function Buttons: \EPfPn;string\
14560 # Pn= Button number (00-06, 18-24)
14561 # (kf00-kf06, kf18-kf24)
14562 # string= Text to sent on button depression
14564 # The following in version 2 only:
14566 # Request For Local Directory Data: \EPp12;\
14568 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
14570 # Request for Local Directory Data in print format: \EPp13;\
14572 # Enable 'Prt on Line' mode: \022 (DC2)
14574 # Disable 'Prt on Line' mode: \024 (DC4)
14578 # The following Terminfo entry describes functions which are supported by
14579 # the AT&T 5430/pt505 terminal software version 2 and later.
14580 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
14582 cols#80, it#8, lines#24,
14583 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14584 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
14585 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
14586 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14587 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14588 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14589 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
14590 il=\E[%p1%dL, il1=\E[L, ind=\n,
14591 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
14592 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14593 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
14594 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
14595 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
14596 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
14597 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
14598 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
14599 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
14600 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
14602 # The following Terminfo entry describes functions which are supported by
14603 # the AT&T 5430/pt505 terminal software version 1.
14604 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
14606 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
14607 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
14608 lines#22, use=att505,
14610 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
14611 # This cut mark helps make life less painful for people running ncurses tic
14612 # on machines with relatively little RAM. The file can be broken in half here
14613 # cleanly and compiled in sections -- no `use' references cross this cut
14617 #### Ampex (Dialogue)
14619 # Yes, these are the same people who are better-known for making audio- and
14620 # videotape. I'm told they are located in Redwood City, CA.
14623 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
14624 # (ampex80: some capabilities merged in from SCO's entry -- esr)
14625 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
14627 cols#80, it#8, lines#24,
14628 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
14629 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14630 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
14631 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
14632 smso=\Ej, smul=\El, tbc=\E3,
14633 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
14634 ampex175|ampex d175,
14637 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14638 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14639 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
14640 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
14641 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
14642 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
14643 # No backspace key in the main QWERTY cluster. Fortunately, it has a
14644 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
14645 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
14646 # mode), this key can be used as the erase key; I find I like this. Because
14647 # some people and some systems may not, there is another termcap ("ampex175")
14648 # that suppresses this little eccentricity by omitting the relevant capability.
14649 ampex175-b|ampex d175 using left arrow for erase,
14650 kbs=^_, use=ampex175,
14651 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
14652 # (ampex210: removed obsolete ":kn#10:" -- esr)
14653 ampex210|a210|ampex a210,
14654 OTbs, am, hs, xenl,
14655 cols#80, it#8, lines#24, xmc#1,
14656 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
14657 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14658 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
14659 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
14660 if=/usr/share/tabset/std, il1=\EE, invis@,
14661 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
14662 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
14663 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
14664 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
14665 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
14666 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
14667 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
14668 # and moved the padding to be *after* the caps -- esr)
14669 ampex219|ampex-219|amp219|Ampex with Automargins,
14671 cols#80, it#8, lines#24,
14672 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
14673 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
14674 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
14675 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
14676 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
14677 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
14678 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
14679 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
14680 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
14681 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
14682 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
14683 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
14684 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
14685 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
14686 cols#132, lines#24,
14687 bel=^G, cr=\r, cud1=\n, ind=\n,
14688 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
14689 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
14690 ampex232|ampex-232|Ampex Model 232,
14692 cols#80, lines#24, xmc#1,
14693 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
14694 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14695 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
14696 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
14697 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
14698 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
14699 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
14700 kf9=^AI\r, khome=^^, use=adm+sgr,
14701 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
14702 ampex232w|Ampex Model 232 / 132 columns,
14703 cols#132, lines#24,
14704 is2=\E\034Eg\El, use=ampex232,
14706 #### Ann Arbor (aa)
14708 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
14709 # numbers of function keys. At least some used monitors in portrait mode,
14710 # allowing up to 76-character screen heights! They were reachable at:
14712 # Ann Arbor Terminals
14713 # 6175 Jackson Road
14714 # Ann Arbor, MI 48103
14717 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
14718 # can't be found on the Web; I fear they're long dead. R.I.P.
14722 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
14723 # Highly modified 6/22 by Mike O'Brien.
14724 # split out into several for the various screen sizes by dave-yost@rand
14725 # Modifications made 3/82 by Mark Horton
14726 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
14727 # status line moved to top of screen, <flash> removed 5/82
14728 # Some unknown person at SCO then hacked the init strings to make them more
14731 # assumes the following setup:
14732 # A menu: 0000 1010 0001 0000
14733 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
14734 # C menu: 56 66 0 0 9600 0110 1100
14735 # D menu: 0110 1001 1 0
14737 # Briefly, the settings are for the following modes:
14738 # (values are for bit set/clear with * indicating our preference
14739 # and the value used to test these termcaps)
14740 # Note that many of these settings are irrelevant to the terminfo
14741 # and are just set to the default mode of the terminal as shipped
14744 # A menu: 0000 1010 0001 0000
14745 # Block/underline cursor*
14746 # blinking/nonblinking cursor*
14747 # key click/no key click*
14748 # bell/no bell at column 72*
14750 # key pad is cursor control*/key pad is numeric
14751 # return and line feed/return for <cr> key *
14752 # repeat after .5 sec*/no repeat
14753 # repeat at 25/15 chars per sec. *
14755 # hold data until pause pressed/process data unless pause pressed*
14756 # slow scroll/no slow scroll*
14757 # Hold in area/don't hold in area*
14758 # functions keys have default*/function keys disabled on powerup
14760 # show/don't show position of cursor during page transmit*
14765 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
14766 # Baud rate (9600*)
14768 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
14769 # 1 stop bit*/2 stop bits
14770 # parity error detection off*/on
14772 # keyboard local/on line*
14773 # half/full duplex*
14774 # disable/do not disable keyboard after data transmission*
14776 # transmit entire page/stop transmission at cursor*
14777 # transfer/do not transfer protected characters*
14778 # transmit all characters/transmit only selected characters*
14779 # transmit all selected areas/transmit only 1 selected area*
14781 # transmit/do not transmit line separators to host*
14782 # transmit/do not transmit page tab stops tabs to host*
14783 # transmit/do not transmit column tab stop tabs to host*
14784 # transmit/do not transmit graphics control (underline,inverse..)*
14786 # enable*/disable auto XON/XOFF control
14787 # require/do not require receipt of a DC1 from host after each LF*
14788 # pause key acts as a meta key/pause key is pause*
14796 # XON character (17*)
14797 # XOFF character (19*)
14799 # C menu: 56 66 0 0 9600 0110 1100
14800 # number of lines to print data on (printer) (56*)
14802 # number of lines on a sheet of paper (printer) (66*)
14804 # left margin (printer) (0*)
14806 # number of pad chars on new line to printer (0*)
14808 # printer baud rate (9600*)
14810 # printer parity: 00=odd,01=even*,10=space,11=mark
14811 # printer stop bits: 2*/1
14812 # print/do not print guarded areas*
14814 # new line is: 01=LF,10=CR,11=CRLF*
14818 # D menu: 0110 1001 1 0
14819 # LF is newline/LF is down one line, same column*
14820 # wrap to preceding line if move left from col 1*/don't wrap
14821 # wrap to next line if move right from col 80*/don't wrap
14822 # backspace is/is not destructive*
14824 # display*/ignore DEL character
14825 # display will not/will scroll*
14826 # page/column tab stops*
14827 # erase everything*/erase unprotected only
14829 # editing extent: 0=display,1=line*,2=field,3=area
14834 annarbor4080|aa4080|ann arbor 4080,
14837 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
14838 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
14839 %{12}%+%;%{64}%+%c,
14840 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
14841 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
14843 # Strange Ann Arbor terminal from BRL
14844 aas1901|Ann Arbor K4080 w/S1901 mod,
14847 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
14848 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
14851 # If you're using the GNU termcap library, add
14852 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
14853 # to these capabilities. This is the nonstandard GNU termcap scrolling
14854 # capability, arguments are:
14855 # 1. Total number of lines on the screen.
14856 # 2. Number of lines above desired scroll region.
14857 # 3. Number of lines below (outside of) desired scroll region.
14858 # 4. Total number of lines on the screen, the same as the first parameter.
14859 # The generic Ann Arbor entry is the only one that uses this.
14860 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
14861 OTbs, am, km, mc5i, mir, xon,
14863 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14864 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
14865 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
14866 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14867 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
14868 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
14869 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
14870 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
14871 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
14872 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14873 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
14874 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
14875 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
14876 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
14877 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
14878 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
14879 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, rev=\E[7m,
14880 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
14882 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
14883 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14886 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
14888 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14889 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
14891 aaa+rv|ann arbor ambassador in reverse video,
14892 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
14893 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
14894 rs1=\E[H\E[7m\E[J$<156>,
14895 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%|%t7
14896 ;%;%?%p7%t8;%;m\016,
14897 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
14898 # Ambassador with the DEC option, for partial vt100 compatibility.
14899 aaa+dec|ann arbor ambassador in dec vt100 mode,
14900 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
14901 csr=\E[%i%p1%d;%p2%dr, enacs=\E(B\E)0, rmacs=^O,
14902 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
14903 %p7%t8;%;m%?%p9%t\016%e\017%;,
14905 aaa-18|ann arbor ambassador/18 lines,
14907 is2=\E7\E[60;0;0;18p\E8,
14908 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
14910 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
14911 use=aaa+rv, use=aaa-18,
14912 aaa-20|ann arbor ambassador/20 lines,
14914 is2=\E7\E[60;0;0;20p\E8,
14915 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
14917 aaa-22|ann arbor ambassador/22 lines,
14919 is2=\E7\E[60;0;0;22p\E8,
14920 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
14922 aaa-24|ann arbor ambassador/24 lines,
14924 is2=\E7\E[60;0;0;24p\E8,
14925 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
14927 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
14928 use=aaa+rv, use=aaa-24,
14929 aaa-26|ann arbor ambassador/26 lines,
14931 is2=\E7\E[60;0;0;26p\E8,
14932 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
14933 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
14934 aaa-28|ann arbor ambassador/28 lines,
14936 is2=\E7\E[60;0;0;28p\E8,
14937 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
14938 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
14939 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
14942 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
14943 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
14944 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
14945 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
14946 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
14947 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
14948 use=aaa+rv, use=aaa-30-s,
14949 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
14950 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
14951 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
14952 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
14953 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
14954 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
14955 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
14957 is2=\E7\E[60;0;0;30p\E8,
14958 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
14959 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
14960 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
14961 use=aaa+rv, use=aaa-30,
14962 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
14963 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
14965 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
14966 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
14967 use=aaa+rv, use=aaa-30,
14968 aaa-36|ann arbor ambassador/36 lines,
14970 is2=\E7\E[60;0;0;36p\E8,
14971 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
14972 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
14973 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
14974 use=aaa+rv, use=aaa-36,
14975 aaa-40|ann arbor ambassador/40 lines,
14977 is2=\E7\E[60;0;0;40p\E8,
14978 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
14979 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
14980 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
14981 use=aaa+rv, use=aaa-40,
14982 aaa-48|ann arbor ambassador/48 lines,
14984 is2=\E7\E[60;0;0;48p\E8,
14985 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
14986 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
14987 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
14988 use=aaa+rv, use=aaa-48,
14989 aaa-60-s|ann arbor ambassador/59 lines+status,
14992 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
14993 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
14994 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
14995 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
14996 use=aaa+rv, use=aaa-60-s,
14997 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
14998 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
14999 aaa-60|ann arbor ambassador/60 lines,
15001 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
15003 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
15004 use=aaa+rv, use=aaa-60,
15005 aaa-db|ann arbor ambassador 30/destructive backspace,
15007 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
15009 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
15011 flash=\E[>59h$<100>\E[>59l,
15012 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
15013 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
15014 guru+rv|guru changes for reverse video,
15015 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
15016 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
15017 use=guru+rv, use=guru-33,
15018 guru+s|guru status line,
15020 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
15021 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
15022 tsl=\E[>51h\E[1;%p1%dH\E[2K,
15023 guru-nctxt|guru with no saved context,
15024 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
15025 guru-s|guru-33-s|ann arbor guru/33 lines+status,
15027 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
15028 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15029 guru-24|ann arbor guru 24 lines,
15031 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
15033 guru-44|ann arbor guru 44 lines,
15035 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
15037 guru-44-s|ann arbor guru/44 lines+status,
15039 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
15040 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15041 guru-76|guru with 76 lines by 89 cols,
15043 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
15045 guru-76-s|ann arbor guru/76 lines+status,
15047 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
15048 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15049 guru-76-lp|guru-lp|guru with page bigger than line printer,
15050 cols#134, lines#76,
15051 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
15053 guru-76-w|guru 76 lines by 178 cols,
15054 cols#178, lines#76,
15055 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
15057 guru-76-w-s|ann arbor guru/76 lines+status+wide,
15058 cols#178, lines#75,
15059 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
15060 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15061 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
15062 cols#178, lines#76,
15063 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
15065 aaa-rv-unk|ann arbor unknown type,
15066 lh#0, lw#0, nlab#0,
15067 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
15068 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
15070 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
15072 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
15074 #### Applied Digital Data Systems (adds)
15076 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
15077 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
15078 # terminals was merged again. Then AT&T sold the terminal business to
15079 # SunRiver, which later changed its name to Boundless Technologies. The
15080 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
15081 # as of early 1995) are at:
15083 # Boundless Technologies
15084 # 100 Marcus Boulevard
15085 # Hauppauge, NY 11788-3762
15086 # Vox: (800)-231-5445
15087 # Fax: (516)-342-7378
15088 # Web: http://boundless.com
15090 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
15091 # In 1995 Boundless acquired DEC's terminals business.
15094 # Regent: lowest common denominator, works on all regents.
15095 # (regent: renamed ":bc:" to ":le:" -- esr)
15096 regent|Adds Regent Series,
15099 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
15100 home=\EY\s\s, ind=\n, ll=^A,
15101 # Regent 100 has a bug where if computer sends escape when user is holding
15102 # down shift key it gets confused, so we avoid escape.
15103 regent100|Adds Regent 100,
15106 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
15107 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
15108 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
15109 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
15110 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
15111 regent20|Adds Regent 20,
15112 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
15114 regent25|Adds Regent 25,
15115 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
15117 regent40|Adds Regent 40,
15119 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r,
15120 kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15121 kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
15122 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
15123 smul=\E0`, use=regent25,
15124 regent40+|Adds Regent 40+,
15125 is2=\EB, use=regent40,
15126 # It uses a different code for mapping acs vs dim/blink.
15127 regent60|regent200|adds200|Adds Regent 60,
15128 acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, ed=\Ek,
15129 is2=\EV\EB, kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF,
15130 krmir=\EF, rmacs=\E2, rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1,
15131 smir=\EF, smso=\ER\E0P\EV, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r,
15132 kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r,
15134 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
15135 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
15136 viewpoint|addsviewpoint|adds viewpoint,
15139 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
15140 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
15141 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
15142 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
15143 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
15144 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
15145 # Some viewpoints have bad ROMs that foo up on ^O
15146 screwpoint|adds viewpoint with ^O bug,
15147 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
15149 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
15150 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
15151 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
15152 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
15153 # invis=01000100 and %c is the logical or of desired attributes.
15154 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
15156 # Update by TD - 2004:
15158 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
15160 # COMMANDS ASCII CODE
15162 # Address, Absolute ESC,=,row,column
15164 # Aux Port Enable ESC,@
15165 # Aux Port Disable ESC,A
15169 # Cursor forward FF
15172 # Cursor suppress ETB
15173 # Cursor enable CAN
15174 # Erase to end of line ESC,T
15175 # Erase to end of page ESC,Y
15178 # Keyboard unlock SO
15179 # Read current cursor position ESC,?
15180 # Set Attribute ESC,0,x (see below for values of x)
15181 # Tag bit reset ESC,(
15182 # Tag bit set ESC,)
15183 # Transparent Print on ESC,3
15184 # Transparent Print off ESC,4
15190 # Half Intensity A 0101
15192 # Half Intensity Blinking C 0103
15193 # Reverse Video P 0120
15194 # Reverse Video Half Intensity Q 0121
15195 # Reverse Video Blinking R 0122
15196 # Reverse Video Half Intensity
15198 # Underlined ` 0140
15199 # Underlined Half Intensity a 0141
15200 # Underlined Blinking b 0142
15201 # Underlined Half Intensity
15203 # Video suppress D 0104
15204 vp3a+|viewpoint3a+|adds viewpoint 3a+,
15206 cols#80, it#8, lines#24,
15207 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
15208 cub1=^H, cud1=\n, cuf1=^L,
15209 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
15210 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
15211 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
15212 nel=\r\n, rev=\E0P\E), rmso=\E(,
15213 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
15214 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
15215 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
15216 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
15217 vp60|viewpoint60|addsvp60|adds viewpoint60,
15220 # adds viewpoint 90 - from cornell
15221 # Note: emacs sends ei occasionally to insure the terminal is out of
15222 # insert mode. This unfortunately puts the viewpoint90 IN insert
15223 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
15224 # - :ei=:im=: must be present in the termcap translation.)
15225 # - <xhp> indicates glitch that attributes stick to location
15226 # - <msgr> means it's safe to move in standout mode
15227 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
15229 # Function key and label capabilities merged in from SCO.
15230 vp90|viewpoint90|adds viewpoint 90,
15231 OTbs, bw, msgr, xhp,
15233 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
15234 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
15235 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
15236 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
15237 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
15238 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
15239 kf7=^B8\r, kf8=^B9\r, kf9=^B:\r, khome=^A, lf0=F1, lf1=F2,
15240 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
15241 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
15242 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
15243 # Note: if return acts weird on a980, check internal switch #2
15244 # on the top chip on the CONTROL pc board.
15245 adds980|a980|adds consul 980,
15248 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
15249 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
15250 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
15251 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
15252 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
15254 #### C. Itoh Electronics
15256 # As of 1995 these people no longer make terminals (they're still in the
15257 # printer business). Their terminals were all clones of the DEC VT series.
15258 # They're located in Orange County, CA.
15261 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
15262 # the delay times and do an auto tab set rather than the indirect
15263 # file used in vt100.
15264 cit80|cit-80|citoh 80,
15267 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
15268 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
15269 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
15270 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
15271 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
15272 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
15273 cit101|citc|C.itoh fast vt100,
15276 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
15277 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15278 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
15279 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
15280 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
15281 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15282 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15283 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
15285 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
15286 # The following termcap entry was created from the Callan cd100 entry. The
15287 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
15288 # full selection of combinations of reverse video, underline, and blink.
15289 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
15290 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
15291 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
15292 cit101e|C. Itoh CIT-101e,
15293 OTbs, OTpt, am, mir, msgr,
15294 cols#80, it#8, lines#24,
15295 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
15296 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
15297 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
15298 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
15299 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
15300 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
15301 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
15302 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
15303 smkx=\E=, smso=\E[7m, smul=\E[4m,
15304 # From: David S. Lawyer, June 1997:
15305 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
15306 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
15307 # late 1980's CIT Terminals went out of business.
15308 # There is no need to use the initialization string is=... (by invoking
15309 # tset or setterm etc.) provided that the terminal has been manually set
15310 # up (and the setup saved with ^S) to be compatible with this termcap. To be
15311 # compatible it should be in ANSI mode (not VT52). A set-up that
15312 # works is to set all the manually settable stuff to factory defaults
15313 # by pressing ^D in set-up mode. Then increase the brightness with the
15314 # up-arrow key since the factory default will likely be dim on an old
15315 # terminal. Then change any options you want (provided that they are
15316 # compatible with the termcap). For my terminal I set: Screen
15317 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
15318 # on. I also set up mine for parity (but you may not need it). Then
15319 # save the setup with ^S.
15320 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
15321 cit101e-rv|Citoh CIT-101e (sets reverse video),
15322 am, eo, mir, msgr, xenl, xon,
15323 cols#80, it#8, lines#24,
15324 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15325 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
15326 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15327 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15328 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15329 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15330 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
15331 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
15332 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
15333 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
15334 B\E[m\E[20l\E[1;24r\E[24;1H,
15335 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15336 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
15337 rev=\E[7m, ri=\EM, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
15338 rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m,
15339 smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m,
15340 smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
15341 u8=\E[?6c, u9=\E[c, use=ecma+index,
15342 cit101e-n|CIT-101e w/o am,
15344 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15346 cit101e-132|CIT-101e with 132 cols,
15348 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
15349 cit101e-n132|CIT-101e with 132 cols w/o am,
15352 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15354 # CIE Terminals CIT-500 from BRL
15355 # The following SET-UP modes are assumed for normal operation:
15356 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
15357 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
15358 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
15359 # Other SET-UP modes may be set for operator convenience or communication
15361 # Hardware tabs are assumed to be set every 8 columns; they can be set up
15362 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
15363 # "stty ixon -ixany" to enable DC3/DC1 flow control!
15364 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
15365 cit500|CIE Terminals CIT-500,
15366 OTbs, OTpt, mir, msgr, xon,
15367 OTkn#10, cols#80, it#8, lines#64, vt#3,
15368 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15369 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15370 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
15371 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15372 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15373 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
15374 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
15375 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
15376 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
15377 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
15378 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
15379 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
15380 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
15381 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
15382 rmso=\E[m, rmul=\E[m,
15383 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
15384 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
15385 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15387 # C. Itoh printers begin here
15388 citoh|ci8510|8510|c.itoh 8510a,
15391 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
15392 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
15394 citoh-pica|citoh in pica,
15395 is1=\EN, use=citoh,
15396 citoh-elite|citoh in elite,
15399 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15402 citoh-comp|citoh in compressed,
15405 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15406 \,097\,105\,113\,121\,129.,
15408 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
15409 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
15411 is1=\EP, use=citoh,
15412 citoh-6lpi|citoh in 6 lines per inch mode,
15413 is3=\EA, use=citoh,
15414 citoh-8lpi|citoh in 8 lines per inch mode,
15416 is3=\EB, use=citoh,
15418 #### Control Data (cdc)
15421 cdc456|cdc 456 terminal,
15424 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15425 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
15426 el=^V, home=^Y, il1=\EL, ind=\n,
15428 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
15432 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15433 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15434 kcuu1=^W, khome=^Y,
15435 cdc721ll|CDC Viking with long lines,
15437 cols#132, lines#24,
15438 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15439 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15440 kcuu1=^W, khome=^Y,
15441 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
15445 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15446 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
15447 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
15449 # The following switch/key settings are assumed for normal operation:
15450 # 96 chars SCROLL FULL duplex not BLOCK
15451 # Other switches may be set according to communication requirements.
15452 # Insert/delete-character cannot be used, as the whole display is affected.
15453 # "so" & "se" are commented out until jove handles "sg" correctly.
15456 OTkn#10, cols#80, lines#24,
15457 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15458 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
15459 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
15460 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
15461 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
15462 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
15463 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
15464 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
15467 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
15469 # Part of the long initialization string defines the "DOWN" key to the left
15470 # of the tab key to send an ESC. The real ESC key is positioned way out
15473 # The termcap won't work in 132 column mode due to the way it it moves the
15474 # cursor. Termcap doesn't have the capability (as far as I could tell) to
15475 # handle the 721 in 132 column mode.
15477 # (cdc721: changed :ri: to :sr: -- esr)
15478 cdc721-esc|Control Data 721,
15479 OTbs, OTpt, am, bw, msgr, xon,
15480 OTkn#10, cols#80, it#8, lines#30,
15481 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
15482 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
15483 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
15484 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
15485 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
15486 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
15487 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
15489 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
15490 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
15491 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
15492 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
15493 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
15498 # Getronics is a Dutch electronics company that at one time was called
15499 # `Geveke' and made async terminals; but (according to the company itself!)
15500 # they've lost all their documentation on the command set. The hardware
15501 # documentation suggests the terminals were actually manufactured by a
15502 # Taiwanese electronics company named Cal-Comp. There are known
15503 # to have been at least two models, the 33 and the 50.
15506 # The 50 seems to be a top end vt220 clone, with the addition of a higher
15507 # screen resolution, a larger screen, at least 1 page of memory above and
15508 # below the screen, apparently pages of memory right and left of the screen
15509 # which can be panned, and about 75 function keys (15 function keys x normal,
15510 # shift, control, func A, func B). It also has more setup possibilities than
15511 # the vt220. The monitor case is dated November 1978 and the keyboard case is
15514 # The vt100 emulation works as is. The entry below describes the rather
15515 # non-conformant (but more featureful) ANSI mode.
15517 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
15518 visa50|geveke visa 50 terminal in ansi 80 character mode,
15521 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
15522 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
15523 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15524 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15525 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15526 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
15527 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
15528 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
15529 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
15530 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
15531 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
15532 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
15533 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
15534 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
15535 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
15536 lf3=A insert line, lf4=A delete line, lf5=A clear,
15537 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
15538 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
15539 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
15540 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
15541 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
15544 #### Human Designed Systems (Concept)
15546 # Human Designed Systems
15548 # King of Prussia, PA 19406
15549 # Vox: (610)-277-8300
15550 # Fax: (610)-275-5739
15551 # Net: support@hds.com
15553 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
15554 # the character-terminal business now (1995) and making X terminals. In
15555 # particular, the whole `Concept' line described here was discontinued long
15559 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
15560 # Extensive changes to c108 by arpavax:eric Feb 1982
15561 # Some unknown person at SCO then translated it to terminfo.
15563 # There seem to be a number of different versions of the C108 PROMS
15564 # (with bug fixes in its Z-80 program).
15566 # The first one that we had would lock out the keyboard of you
15567 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
15568 # Try that on your C108 and see if it sends a ^S when you type it.
15569 # If so, you have an old version of the PROMs.
15571 # You should configure the C108 to send ^S/^Q before running this.
15572 # It is much faster (at 9600 baud) than the c100 because the delays
15574 # new status line display entries for c108-8p:
15575 # <is3> - init str #3 - setup term for status display -
15576 # set programmer mode, select window 2, define window at last
15577 # line of memory, set bkgnd stat mesg there, select window 0.
15579 # <tsl> - to status line - select window 2, home cursor, erase to
15580 # end-of-window, 1/2 bright on, goto(line#0, col#?)
15582 # <fsl> - from status line - 1/2 bright off, select window 0
15584 # <dsl> - disable status display - set bkgnd status mesg with
15587 # There are probably more function keys that should be added but
15588 # I don't know what they are.
15590 # No delays needed on c108 because of ^S/^Q handshaking
15592 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
15593 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
15595 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
15596 c108-4p|concept108-4p|concept 108 w/4 pages,
15597 OTbs, eslok, hs, xon,
15599 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
15600 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
15601 %>%t\001%{96}%-%;%{32}%+%c,
15602 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
15603 ind=\n, is1=\EK\E!\E F,
15604 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
15605 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
15606 smcup=\EU\Ev 8p\Ep\r\E\025,
15607 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
15608 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
15609 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
15611 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
15612 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
15614 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
15616 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
15617 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
15620 # These have only window relative cursor addressing, not screen
15621 # relative. To get it to work right here, smcup/rmcup (which
15622 # were invented for the concept) lock you into a one page
15623 # window for screen style programs.
15625 # To get out of the one page window, we use a clever trick:
15626 # we set the window size to zero ("\Ev " in rmcup) which the
15627 # terminal recognizes as an error and resets the window to all
15630 # This trick works on c100 but does not on c108, sigh.
15632 # Some tty drivers use cr3 for concept, others use nl3, hence
15633 # the delays on cr and ind below. This padding is only needed at
15634 # 9600 baud and up. One or the other is commented out depending on
15635 # local conventions.
15637 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
15638 # less than 6 but more than 2 will work.
15640 # Note: can't use function keys f7-f10 because they are
15641 # indistinguishable from arrow keys (!), also, del char and
15642 # clear eol use xon/xoff so they probably won't work very well.
15644 # Also note that we don't define insrt/del char/delline/eop/send
15645 # because they don't transmit unless we reset them - I figured
15646 # it was a bad idea to clobber their definitions.
15648 # The <mc5> sequence changes the escape character to ^^ so that
15649 # escapes will be passed through to the printer. Only trouble
15650 # is that ^^ won't be - ^^ was chosen to be unlikely.
15651 # Unfortunately, if you're sending raster bits through to be
15652 # plotted, any character you choose will be likely, so we lose.
15654 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
15655 # cannot be # in is2 because it will hang a c100 with no printer
15657 c100|concept100|concept|c104|c100-4p|hds concept 100,
15658 OTbs, am, eo, mir, ul, xenl,
15659 cols#80, lines#24, pb#9600, vt#8,
15660 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
15661 cub1=^H, cud1=\n, cuf1=\E=,
15662 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
15663 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
15664 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
15665 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
15667 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
15668 \010A@\s\E4#:"\E:a\E4#;"\E:b\E4#<"\E:c,
15669 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
15670 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
15671 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
15672 kf4=\E8, kf5=\E9, kf6=\E:a, kf7=\E:b, kf8=\E:c, khome=\E?,
15673 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
15674 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
15675 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
15676 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
15677 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
15678 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
15679 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
15680 smso=\ED, smul=\EG,
15681 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
15682 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
15683 smso=\EE, use=c100,
15684 oc100|oconcept|c100-1p|old 1 page concept 100,
15688 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
15689 # Lots of notes, originally inline, but ncurses doesn't grok that.
15691 # am: not available in power on mode, but turned on with \E[=107;207h in
15692 # is2=. Also, \E=124l in is2= could have been used to prevent needing
15693 # to specify xenl:, but that would have rendered the last space on the
15694 # last line useless.
15695 # bw: Not available in power on mode, but turned on with \E[=107;207h in
15697 # clear: Could be done with \E[2J alone, except that vi (and probably most
15698 # other programs) assume that this also homes the cursor.
15699 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
15700 # scroll the window, and go back to window 1.
15701 # is2: the string may cause a warning to be issued by tic that it
15702 # found a very long line and that it suspects that a comma is missing
15703 # somewhere. This warning can be ignored (unless it comes up more than
15704 # once). The initialization string contains the following commands:
15706 # [Setup mode items changed from factory defaults:]
15707 # \E)0 set alternate character set to
15709 # ^O set character set to default
15710 # [In case it wasn't]
15711 # \E[m turn off all attributes
15712 # [In case they weren't off]
15713 # \E[=107; cursor wrap and
15714 # 207h character wrap on
15715 # \E[90;3u set Fkey definitions to "transmit"
15717 # \E[92;3u set cursor key definitions to
15718 # "transmit" defaults
15719 # \E[43;1u set shift F13 to transmit...
15721 # \E[44;1u set shift F14 to transmit...
15723 # \E[45;1u set shift F15 to transmit...
15725 # \E[46;1u set shift F16 to transmit...
15727 # \E[200;1u set shift up to transmit...
15729 # \E[201;1u set shift down to transmit...
15731 # \E[202;1u set shift right to transmit...
15733 # \E[203;1u set shift left to transmit...
15735 # \E[204;1u set shift home to transmit...
15737 # \E[212;1u set backtab to transmit...
15739 # \E[213;1u set shift backspace to transmit...
15741 # \E[214;1u set shift del to transmit...
15743 # [Necessary items not mentioned in setup mode:]
15744 # \E[2!w move to window 2
15745 # \E[25;25w define window as line 25 of memory
15746 # \E[!w move to window 1
15747 # \E[2*w show current line of window 2 as
15749 # \E[2+x set meta key to use high bit
15750 # \E[;3+} move underline to bottom of character
15752 # All Fkeys are set to their default transmit definitions with \E[90;3u
15753 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
15754 # setting MUST be redefined or deactivated, because the default is
15755 # contained in almost all of this terminal's Fkey strings! If for some
15756 # reason "quit" cannot be altered, the Fkeys can, but it would be
15757 # necessary to change ^| to ^] in all of these definitions, and add
15758 # \E[2;029!t to is2.
15759 # lines: is set to 24 because this terminal refuses to treat the 25th
15761 # ll: Not available in power on mode, but turned on with \E[=107;207h in
15763 # lm: Pointless, given that this definition locks a single screen of
15764 # memory into view, but what the hey...
15765 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
15766 # other attributes alone), but some programs expect this to turn off
15768 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
15769 # attributes alone), but some programs expect this to turn off
15771 # sgr: Attributes are set on this terminal with the string \E[ followed by
15772 # a list of attribute code numbers (in decimal, separated by
15773 # semicolons), followed by the character m. The attribute code
15776 # 2 for dim (which is ignored in power on mode);
15780 # 8 for not displayable; and
15781 # =99 for protected (except that there are strange side
15782 # effects to protected characters which make them inadvisable).
15783 # The mapping of terminfo parameters to attributes is as follows:
15784 # %p1 (standout) = bold and inverse together;
15785 # %p2 (underline) = underline;
15786 # %p3 (reverse) = inverse;
15787 # %p4 (blink) = blinking;
15788 # %p5 (dim) is ignored;
15789 # %p6 (bold) = bold;
15790 # %p7 (invisible) = not displayable;
15791 # %p8 (protected) is ignored; and
15792 # %p9 (alt char set) = alt char set.
15793 # The code to do this is:
15795 # %?%p1%p6%O IF (standout; bold) OR
15796 # %t;1 THEN OUTPUT ;1
15798 # %?%p2 IF underline
15799 # %t;4 THEN OUTPUT ;4
15802 # %t;5 THEN OUTPUT ;5
15804 # %?%p1%p3%O IF (standout; reverse) OR
15805 # %t;7 THEN OUTPUT ;7
15807 # %?%p7 IF invisible
15808 # %t;8 THEN OUTPUT ;8
15811 # %?%p9 IF altcharset
15812 # %t^N THEN OUTPUT ^N
15813 # %e^O ELSE OUTPUT ^O
15815 # sgr0: Everything is turned off (including alternate character set), since
15816 # there is no way of knowing what it is that the program wants turned
15818 # smul: The "underline" attribute is reconfigurable to an overline or
15819 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
15820 # bottom of the character cell. This was done to allow for more readable
15821 # underlined characters, and to be able to distinguish between an
15822 # underlined space, an underscore, and an underlined underscore.
15823 # xenl: Terminal can be configured to not need this, but this "glitch"
15824 # behavior is actually preferable with autowrap terminals.
15826 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
15827 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
15828 # string modifies the 'O' in kf43 to kf46 to a '$'.
15830 # kcbt was originally ^I but redefined in is2=.
15831 # kHOM was \E[H originally but redefined in is2=, as were a number of
15833 # kDC was originally \177 but redefined in is2=.
15835 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
15836 # tsl: Go to window 2, then do an hpa=.
15838 #------- flash=\E[8;3!}^G\E[3;3!}
15839 #------- flash=\E[?5h$<100>\E[?5l
15840 # There are two ways to flash the screen, both of which have their drawbacks.
15841 # The first is to set the bell mode to video, transmit a bell character, and
15842 # set the bell mode back - but to what? There is no way of knowing what the
15843 # user's old bell setting was before we messed with it. Worse, the command to
15844 # set the bell mode also sets the key click volume, and there is no way to say
15845 # "leave that alone", or to know what it's set to, either.
15846 # The second way to do a flash is to set the screen to inverse video, pad for a
15847 # tenth of a second, and set it back - but like before, there's no way to know
15848 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
15849 # it that way. The point is moot anyway, since vi (and probably other
15850 # programs) assume that by defining flash=, you want the computer to use it
15851 # INSTEAD of bel=, rather than as a secondary type of signal.
15853 #------- cvvis=\E[+{
15854 # The is the power on setting, which is also as visible as the cursor
15856 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
15857 # Windowing is possible, but not defined here because it is also used to
15858 # emulate status line functions. Allowing a program to set a window could
15859 # clobber the status line or render it unusable. There is additional memory,
15860 # but screen scroll functions are destructive and do not make use of it.
15862 #------- dim= Not available in power on mode.
15863 # You have a choice of defining low intensity characters as "half bright" and
15864 # high intensity as "normal", or defining low as "normal" and high as "bold".
15865 # No matter which you choose, only one of either "half bright" or "bold" is
15866 # available at any time, so taking the time to override the default is
15869 #------- prot=\E[=0;99m
15870 # Not defined, because it appears to have some strange side effects.
15871 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
15872 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
15873 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
15874 # Available, but making them available to programs is inadvisable.
15875 # The code to do this is:
15876 # %?%p1%{24}%< IF ((key; 24) <;
15877 # %p1%{30}%> ((key; 30) >;
15878 # %p1%{54}%< (key; 54) <
15881 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
15882 # %t\E[ THEN OUTPUT \E[
15883 # %p1%d OUTPUT (key) as decimal
15884 # [next line applies to pfx only]
15888 # %p2%s OUTPUT (string) as string
15890 # [DEL chosen as delimiter, but could be any character]
15891 # [implied: ELSE do nothing]
15895 # Not defined since anything it might do could be done faster and easier with
15896 # either Meta-Shift-Reset or the main power switch.
15898 #------- smkx=\E[1!z
15899 #------- rmkx=\E[!z
15900 # These sequences apply to the cursor and setup keys only, not to the
15901 # numeric keypad. But it doesn't matter anyway, since making these
15902 # available to programs is inadvisable.
15903 # For the key definitions below, all sequences beginning with \E$ are
15904 # custom and programmed into the terminal via is2. \E$ also has no
15905 # meaning to any other terminal.
15907 #------- cmdch=\E[;%p1%d!t
15908 # Available, but making it available to programs is inadvisable.
15909 #------- smxon=\E[1*q
15910 # Available, but making it available to programs is inadvisable.
15911 # Terminal will send XON/XOFF on buffer overflow.
15912 #------- rmxon=\E[*q
15913 # Available, but making it available to programs is inadvisable.
15914 # Terminal will not notify on buffer overflow.
15915 #------- smm=\E[2+x
15917 # Available, but making them available to programs is inadvisable.
15920 # It's not made clear in the manuals, but based on other ansi/vt type
15921 # terminals, it's a good guess that this terminal is capable of both
15922 # "transparent print" (which doesn't copy data to the screen, and
15923 # therefore needs mc5i: specified to say so) and "auxiliary print"
15924 # (which does duplicate printed data on the screen, in which case mc4=
15925 # and mc5= should use the \E[?4i and \E[?5i strings instead).
15927 hds200|Human Designed Systems HDS200,
15928 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
15929 cols#80, it#8, lines#24, lm#0,
15930 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15931 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
15932 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
15933 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15934 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15935 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15936 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15937 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
15938 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
15939 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
15941 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
15942 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
15943 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
15944 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
15945 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
15946 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
15947 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
15948 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15949 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
15950 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
15951 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
15952 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
15953 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
15954 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
15955 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
15956 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
15957 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
15958 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
15959 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
15960 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
15961 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
15962 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
15963 rmul=\E[m\017, sc=\E7,
15964 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
15965 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
15966 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
15967 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
15968 vpa=\E[%i%p1%dd, use=ansi+pp,
15970 # <ht> through <el> included to specify padding needed in raw mode.
15971 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
15972 avt-ns|concept avt no status line,
15973 OTbs, am, eo, mir, ul, xenl, xon,
15974 cols#80, it#8, lines#24, lm#192,
15975 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15976 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
15977 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15978 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
15979 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15980 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
15981 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
15982 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
15983 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
15984 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
15985 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
15986 \E[1Q\EW\E[!y\E[!z\E>\E[0:0:32!r\E[0*w\E[w\E2\r\n\E[2;27
15988 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15989 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15990 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
15991 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
15992 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
15993 prot=\E[99m, rc=\E8, rev=\E[7m, ri=\EM$<4>, rmacs=\016$<1>,
15994 rmcup=\E[w\E2\r\n, rmir=\E[4l, rmkx=\E[!z\E[0;2u,
15995 rmso=\E[7!{, rmul=\E[4!{, sc=\E7,
15996 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
15997 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
15999 sgr0=\E[m\016$<1>, smacs=\017$<1>,
16000 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
16001 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16002 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
16003 avt-rv-ns|concept avt in reverse video mode/no status line,
16004 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16006 avt-w-ns|concept avt in 132 column mode/no status line,
16007 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16009 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
16010 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16011 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
16013 # Concept AVT with status line. We get the status line using the
16014 # "Background status line" feature of the terminal. We swipe the
16015 # first line of memory in window 2 for the status line, keeping
16016 # 191 lines of memory and 24 screen lines for regular use.
16017 # The first line is used instead of the last so that this works
16018 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
16019 # assumes an 8 page AVT but lm isn't currently used anywhere.)
16021 avt+s|concept avt status line changes,
16024 dsl=\E[0*w, fsl=\E[1;1!w,
16025 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
16026 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
16027 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
16028 avt|avt-s|concept-avt|avt w/80 columns,
16029 use=avt+s, use=avt-ns,
16030 avt-rv|avt-rv-s|avt reverse video w/sl,
16031 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16032 use=avt+s, use=avt-ns,
16033 avt-w|avt-w-s|concept avt 132 cols+status,
16034 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16035 use=avt+s, use=avt-ns,
16036 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
16037 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16038 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
16040 #### Contel Business Systems.
16043 # Contel c300 and c320 terminals.
16044 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
16046 cols#80, lines#24, xmc#1,
16047 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16048 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16049 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16050 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16051 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
16052 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16053 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16054 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
16055 # Contel c301 and c321 terminals.
16056 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
16057 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
16060 #### Data General (dg)
16062 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
16063 # the terminals group at Data General was shut down in 1991; all these
16064 # terminals have thus been discontinued.
16066 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
16067 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
16068 # sequentially, first the unmodified key codes are listed as F1 through F15.
16069 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
16070 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
16071 # F46 through F60. This is done in the private "includes" below whose names
16072 # start with "dgkeys+".
16074 # DG terminals generally support 8 bit characters. For each of these terminals
16075 # two descriptions are supplied:
16076 # 1) A default description for 8 bits/character communications, which
16077 # uses the default DG international character set and keyboard codes.
16078 # 2) A description with suffix "-7b" for 7 bits/character communications.
16079 # This description must use the NON-DEFAULT native keyboard language.
16081 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
16082 # Ctrl/Shift fdkeys (kf34-kf44).
16084 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
16085 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
16086 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
16087 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
16088 kf11=\233011z, kf12=\233012z, kf13=\233013z,
16089 kf14=\233014z, kf15=\233000z, kf16=\233101z,
16090 kf17=\233102z, kf18=\233103z, kf19=\233104z,
16091 kf2=\233002z, kf20=\233105z, kf21=\233106z,
16092 kf22=\233107z, kf23=\233108z, kf24=\233109z,
16093 kf25=\233110z, kf26=\233111z, kf27=\233112z,
16094 kf28=\233113z, kf29=\233114z, kf3=\233003z,
16095 kf30=\233100z, kf31=\233201z, kf32=\233202z,
16096 kf33=\233203z, kf34=\233204z, kf35=\233205z,
16097 kf36=\233206z, kf37=\233207z, kf38=\233208z,
16098 kf39=\233209z, kf4=\233004z, kf40=\233210z,
16099 kf41=\233211z, kf42=\233212z, kf43=\233213z,
16100 kf44=\233214z, kf45=\233200z, kf46=\233301z,
16101 kf47=\233302z, kf48=\233303z, kf49=\233304z,
16102 kf5=\233005z, kf50=\233305z, kf51=\233306z,
16103 kf52=\233307z, kf53=\233308z, kf54=\233309z,
16104 kf55=\233310z, kf56=\233311z, kf57=\233312z,
16105 kf58=\233313z, kf59=\233314z, kf6=\233006z,
16106 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
16107 khome=\233H, kprt=\233i,
16109 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
16110 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
16111 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16112 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
16113 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
16114 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
16115 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
16116 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
16117 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
16118 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
16119 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
16120 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
16121 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
16122 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
16123 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
16124 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
16125 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
16126 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
16127 kf9=\E[009z, khome=\E[H, kprt=\E[i,
16129 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
16130 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
16131 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
16132 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
16133 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
16134 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
16135 kf31=^^9, kf32=^^:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
16136 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
16137 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
16138 kf8=^^x, kf9=^^y, khome=^H,
16140 dgkeys+15|Private entry describing 15 DG mode special keys,
16141 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
16142 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
16143 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
16144 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
16145 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
16146 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
16147 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^:,
16148 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
16149 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
16150 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
16151 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
16154 # Data General color terminals use the "Tektronix" color model. The total
16155 # number of colors varies with the terminal model, as does support for
16156 # attributes used in conjunction with color.
16158 # Removed u7, u8 definitions since they conflict with tack:
16159 # Preserve user-defined colors in at least some cases.
16161 # Default is ACM mode.
16162 # u8=^^F}20^^Fi^^F}21,
16164 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
16166 colors#16, ncv#53, pairs#0x100,
16168 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16169 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16170 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16171 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16172 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
16174 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
16177 # Video attributes are coordinated using static variables set by "sgr", then
16178 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
16179 # (D=dim, U=underline, B=blink, R=reverse.)
16180 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
16182 colors#8, ncv#16, pairs#64,
16183 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
16184 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16185 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16186 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16187 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16188 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16189 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16191 dg+color|Color info for Data General D470C terminals in ANSI mode,
16192 colors#16, ncv#53, pairs#0x100,
16193 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16194 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16196 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16197 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16199 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16200 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16202 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16203 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16207 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
16209 colors#8, ncv#16, pairs#64,
16211 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16213 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16215 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
16217 dgmode+color|Color info for Data General D470C terminals in DG mode,
16218 colors#16, pairs#0x100,
16219 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16220 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16221 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16222 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16225 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
16227 colors#52, ncv#53, pairs#26,
16228 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
16229 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
16230 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
16232 oc=\036RG01A00FF00000000\036RG01B00000000FF00
16233 \036RG01C007F00000000\036RG01D000000007F00,
16234 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
16235 scp=\036RG2%p1%02X,
16237 # Colors are in the order: normal, reverse, dim, dim + reverse.
16238 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
16240 colors#52, ncv#53, pairs#26,
16241 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
16242 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
16243 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
16244 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
16245 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
16246 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
16247 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
16248 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
16249 oc=\036RG01:00??00000000\036RG01;00000000??00\036RG01<007?00
16250 000000\036RG01=000000007?00,
16251 op=\036RF4831:\036RF2>31;\036RF1=31<\036RF3?31=,
16252 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
16254 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
16255 # Initialization string 1 sets:
16256 # ^R - vertical scrolling enabled
16257 # ^C - blinking enabled
16258 dg-generic|Generic Data General terminal in DG mode,
16261 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16262 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
16263 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
16264 smul=^T, use=dgkeys+11,
16266 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
16267 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
16268 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
16269 # maybe they were originally nuls (which would fit).
16271 dg200|data general dasher 200,
16274 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16275 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
16276 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
16277 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
16278 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
16281 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
16282 dg210|dg-ansi|Data General 210/211,
16285 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
16286 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16287 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16288 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
16289 smso=\E[7;m, smul=\E[4;m,
16290 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
16291 # courtesy of Carlos Rucalde of Vantage Software, Inc.
16292 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
16293 # I suspect the d200 function keys actually work on the dg211, check it out.)
16294 dg211|Data General d211,
16295 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
16296 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
16297 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
16299 # dg450 from Cornell (not official)
16300 dg450|dg6134|data general 6134,
16301 cub1@, cuf1=^X, use=dg200,
16304 # Note: lesser Dasher terminals will not work with vi because vi insists upon
16305 # having a command to move straight down from any position on the bottom line
16306 # and scroll the screen up, or a direct vertical scroll command. The 460 and
16307 # above have both, the D210/211, for instance, has neither. We must use ANSI
16308 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
16309 # backspace on all terminals. This is not so in DG mode.
16310 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
16311 # grounds that there is no matching ":ml:"
16312 dg460-ansi|Data General Dasher 460 in ANSI-mode,
16313 OTbs, am, msgr, ul,
16314 cols#80, it#8, lines#24,
16315 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
16316 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
16317 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16318 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
16319 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16320 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
16321 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
16322 kf8=\E[009z, kf9=\E[00:z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
16323 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, mc0=\E[i,
16324 rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
16325 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
16327 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
16328 u7=\E[6n, u8=\E[5n, u9=\E[0n,
16329 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
16330 # Data General 605x
16331 # Ought to work for a Model 6242, Type D210 as well as a 605x.
16332 # Note that the cursor-down key transmits ^Z. Job control users, beware!
16333 # This also matches a posted description of something called a `Dasher 100'
16334 # so there's a dg100 alias here.
16335 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
16336 dg6053-old|dg100|data general 6053,
16339 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
16340 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
16341 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
16342 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
16343 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
16344 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
16347 # (Some performance can be gained over the generic DG terminal type)
16348 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
16350 home=\020\0\0, ll=^P\0^W, use=dg-generic,
16352 # Like 6053, but adds reverse video and more keypad and function keys.
16353 d200|d200-dg|Data General DASHER D200,
16354 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
16355 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16356 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
16357 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
16359 # DASHER D210 series terminals in ANSI mode.
16360 # Reverse video, no insert/delete character/line, 7 bits/character only.
16362 # Initialization string 1 sets:
16363 # <0 - scrolling enabled
16364 # <1 - blink enabled
16365 # <4 - print characters regardless of attributes
16366 d210|d214|Data General DASHER D210 series,
16369 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
16370 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16371 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16372 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
16373 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
16374 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
16375 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
16377 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
16379 # DASHER D210 series terminals in DG mode.
16380 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
16381 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
16383 ed=^^FF, use=d200-dg,
16385 # DASHER D211 series terminals in ANSI mode.
16386 # Like the D210, but with 8-bit characters and local printer support.
16388 # Initialization string 2 sets:
16390 # 2;1 - 8 bit operations
16391 # 1;1 - 8 bit (international) keyboard language
16392 # \E(B - default primary character set (U.S. ASCII)
16393 # \E)4 - default secondary character set (international)
16394 # ^O - primary character set
16396 d211|d215|Data General DASHER D211 series,
16398 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
16401 # Initialization string 2 sets:
16403 # 2;0 - 7 bit operations
16404 # 1;0 - 7 bit (native) keyboard language
16405 # \E(0 - default character set (the keyboard native language)
16406 # ^O - primary character set
16407 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
16409 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
16411 # Like the D210 series, but adds support for 8-bit characters.
16413 # Reset string 2 sets:
16414 # ^^N - secondary character set
16415 # ^^FS0> - 8 bit international character set
16416 # ^^O - primary character set
16417 # ^^FS00 - default character set (matching the native keyboard language)
16419 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
16421 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
16423 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
16426 # Enhanced DG mode with changes to be more UNIX compatible.
16427 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
16430 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
16431 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
16432 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
16433 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
16434 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
16435 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
16436 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
16437 rs2=\036N\036FS0E\036O\036FS00,
16438 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
16439 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
16441 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
16442 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
16443 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
16445 is3=^^Fz2, use=d216+,
16447 d217-unix|Data General DASHER D217 in DG-UNIX mode,
16449 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
16452 # DASHER D220 color terminal in ANSI mode.
16453 # Like the D470C but with fewer colors and screen editing features.
16455 # Initialization string 1 sets:
16457 # <0 - scrolling enabled
16458 # <1 - blink enabled
16459 # <4 - print characters regardless of attributes
16460 # \E[m - all attributes off
16461 # Reset string 1 sets:
16462 # \Ec - initial mode defaults (RIS)
16464 d220|Data General DASHER D220,
16466 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
16467 use=dg+color8, use=d470c,
16469 d220-7b|Data General DASHER D220 in 7 bit mode,
16471 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
16472 use=dg+color8, use=d470c-7b,
16474 # Initialization string 3 sets:
16475 # - default cursor (solid rectangle)
16476 # Reset string 2 sets:
16477 # ^^N - secondary character set
16478 # ^^FS0> - 8 bit international character set
16479 # ^^O - primary character set
16480 # ^^FS00 - default character set (matching the native keyboard language)
16482 d220-dg|Data General DASHER D220 color terminal in DG mode,
16484 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
16485 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
16488 # DASHER D230C color terminal in ANSI mode.
16489 # Like the D220 but with minor ANSI compatibility improvements.
16491 d230c|d230|Data General DASHER D230C,
16492 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
16493 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
16494 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}
16495 %;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e
16496 %{0}%;%PD50m\E)%?%p9%t6\016%e4\017%;,
16497 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
16498 smul=\E[4;50m, use=dgkeys+7b, use=d220,
16500 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
16503 # DASHER D400/D450 series terminals.
16504 # These add intelligent features like insert/delete to the D200 series.
16506 # Initialization string 2 sets:
16507 # ^^FQ2 - default cursor (solid rectangle)
16508 # ^^FW - character protection disabled
16509 # ^^FJ - normal (80 column) mode
16510 # ^^F\^ - horizontal scrolling enabled (for alignment)
16511 # ^^FX004? - margins at columns 0 and 79
16512 # ^^F] - horizontal scrolling disabled
16513 # ^^O - primary character set
16514 # ^^FS00 - default character set (the keyboard native language)
16515 # - (should reset scrolling regions, but that glitches the screen)
16516 # Reset string 1 sets:
16517 # ^^FA - all terminal defaults except scroll rate
16518 # Reset string 2 sets:
16519 # ^^F] - horizontal scrolling disabled
16520 # ^^FT0 - jump scrolling
16522 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
16524 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
16525 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
16526 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
16527 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
16529 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
16531 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16532 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
16533 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
16536 # DASHER D410/D460 series terminals in ANSI mode.
16537 # These add a large number of intelligent terminal features.
16539 # Initialization string 1 sets:
16541 # <0 - scrolling enabled
16542 # <1 - blink enabled
16543 # <2 - horizontal scrolling enabled (for alignment)
16544 # <4 - print characters regardless of attributes
16545 # \E[5;0v - normal (80 column) mode
16546 # \E[1;1;80w - margins at columns 1 and 80
16548 # 1 - print all characters even if protected
16549 # 6 - character protection disabled
16550 # <2 - horizontal scrolling disabled
16551 # - (should reset scrolling regions, but that glitches the screen)
16553 # Initialization string 2 sets:
16555 # 3;2 - default cursor (solid rectangle)
16556 # 2;1 - 8 bit operations
16557 # 1;1 - international keyboard language
16558 # \E(B - default primary character set (U.S. ASCII)
16559 # \E)4 - default secondary character set (international)
16560 # ^O - primary character set
16562 # Reset string 1 sets:
16563 # \Ec - initial mode defaults (RIS)
16564 # \E[<2h - horizontal scrolling disabled
16566 # Reset string 2 sets:
16568 # 4;0 - jump scrolling
16569 # 2;1 - 8 bit operations
16570 # 1;1 - 8 bit (international) keyboard language
16571 # \E(B - default primary character set (U.S. ASCII)
16572 # \E)4 - default secondary character set (international)
16574 d410|d411|d460|d461|Data General DASHER D410/D460 series,
16576 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
16577 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
16578 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
16579 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
16580 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
16581 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
16582 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
16583 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
16584 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
16585 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
16587 # Initialization string 2 sets:
16589 # 3;2 - default cursor (solid rectangle)
16590 # 2;0 - 7 bit operations
16591 # 1;0 - 7 bit (native) keyboard language
16592 # \E(0 - default character set (the keyboard native language)
16593 # ^O - primary character set
16595 # Reset string 2 sets:
16597 # 4;0 - jump scrolling
16598 # 2;0 - 7 bit operations
16599 # 1;0 - 7 bit (native) keyboard language
16600 # \E(0 - default character set (the keyboard native language)
16602 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
16604 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
16605 rs2=\E[4;0;2;0;1;0v\E(0,
16606 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
16607 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
16608 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
16610 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
16612 enacs@, rmacs=\036FS00,
16613 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16614 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
16616 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
16619 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
16621 # Initialization string 1 sets:
16623 # <0 - scrolling enabled
16624 # <1 - blink enabled
16625 # <2 - horizontal scrolling enabled (for alignment)
16626 # <4 - print characters regardless of attributes
16627 # \E[5;1v - compressed (135 column) mode
16628 # \E[1;1;126 - margins at columns 1 and 126
16630 # 1 - print all characters even if protected
16631 # 6 - character protection disabled
16632 # <2 - horizontal scrolling disabled
16633 # - (should reset scrolling regions, but that glitches the screen)
16635 # Reset string 1 sets:
16636 # \Ec - initial mode defaults (RIS)
16637 # \E[5;1v - compressed (135 column) mode
16638 # \E[1;1;126w - margins at columns 1 and 126
16639 # \E[<2h - horizontal scrolling disabled
16641 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
16643 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16644 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
16646 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
16648 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16649 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
16651 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
16654 # These add intelligent features like scrolling regions.
16655 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
16656 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
16657 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
16658 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
16659 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
16661 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
16662 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
16663 vpa=\036FPFF%p1%2.2X,
16664 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
16665 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
16667 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
16669 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
16671 rs2=\036P@1\036FK\036FX0083,
16672 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
16673 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
16675 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
16678 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
16679 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
16681 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
16683 clear=\036FG\036PH, fsl=\036F}01\022,
16684 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
16685 tsl=\036F}00\036FP%p1%2.2X18\036PG,
16686 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
16687 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
16690 # Relative cursor motions are confined to the current window,
16691 # which is not what the scrolling region specification expects.
16692 # Thus, relative vertical cursor positioning must be deleted.
16693 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
16694 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
16696 cud1@, cuu1@, ll@, use=d462+,
16698 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
16700 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
16702 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
16704 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
16706 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
16709 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
16711 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
16713 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
16715 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
16717 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
16720 d430c-dg|d430-dg|Data General D430C in DG mode,
16721 use=d413-dg, use=dg+fixed,
16722 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
16723 use=d413-dg, use=dg+ccc,
16725 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
16726 use=d413-unix, use=dgunix+fixed,
16727 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
16728 use=d413-unix-w, use=dgunix+fixed,
16729 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
16730 use=d413-unix-25, use=dgunix+fixed,
16731 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
16732 use=d413-unix-s, use=dgunix+fixed,
16733 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
16734 use=d413-unix-sr, use=dgunix+fixed,
16735 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
16736 use=d413-unix, use=dgunix+ccc,
16737 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
16738 use=d413-unix-w, use=dgunix+ccc,
16739 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
16740 use=d413-unix-25, use=dgunix+ccc,
16741 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
16742 use=d413-unix-s, use=dgunix+ccc,
16743 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
16744 use=d413-unix-sr, use=dgunix+ccc,
16746 # DASHER D470C color terminal in ANSI mode.
16747 # Like the D460 but with 16 colors and without a compressed mode.
16749 # Initialization string 1 sets:
16751 # <0 - scrolling enabled
16752 # <1 - blink enabled
16753 # <2 - horizontal scrolling enabled (for alignment)
16754 # <4 - print characters regardless of attributes
16755 # \E[1;1;80w - margins at columns 1 and 80
16757 # 1 - print all characters even if protected
16758 # 6 - character protection disabled
16759 # <2 - horizontal scrolling disabled
16760 # - (should reset scrolling regions, but that glitches the screen)
16762 d470c|d470|Data General DASHER D470C,
16763 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
16764 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
16765 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
16766 use=dg+color, use=d460,
16768 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
16769 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
16770 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
16771 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
16772 use=dg+color, use=d460-7b,
16774 # Initialization string 2 sets:
16775 # ^^FQ2 - default cursor (solid rectangle)
16776 # ^^FW - character protection disabled
16777 # ^^F\^ - horizontal scrolling enabled (for alignment)
16778 # ^^FX004? - margins at columns 0 and 79
16779 # ^^F] - horizontal scrolling disabled
16780 # ^^O - primary character set
16781 # ^^FS00 - default character set (the keyboard native language)
16782 # - (should reset scrolling regions, but that glitches the screen)
16784 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
16785 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
16787 use=dgmode+color, use=d460-dg,
16789 # DASHER D555 terminal in ANSI mode.
16790 # Like a D411, but has an integrated phone.
16791 d555|Data General DASHER D555,
16793 d555-7b|Data General DASHER D555 in 7-bit mode,
16795 d555-w|Data General DASHER D555 in wide mode,
16797 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
16799 d555-dg|Data General DASHER D555 series in DG mode,
16802 # DASHER D577 terminal in ANSI mode.
16803 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
16804 d577|Data General DASHER D577,
16806 d577-7b|Data General DASHER D577 in 7-bit mode,
16808 d577-w|Data General DASHER D577 in wide mode,
16810 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
16813 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
16816 # DASHER D578 terminal.
16817 # Like a D577, but without compressed mode; like a D470C in this respect.
16819 # Initialization string 1 sets:
16821 # <0 - scrolling enabled
16822 # <1 - blink enabled
16823 # <2 - horizontal scrolling enabled (for alignment)
16824 # <4 - print characters regardless of attributes
16825 # \E[1;1;80w - margins at columns 1 and 80
16827 # 1 - print all characters even if protected
16828 # 6 - character protection disabled
16829 # <2 - horizontal scrolling disabled
16830 # - (should reset scrolling regions, but that glitches the screen)
16832 d578|Data General DASHER D578,
16833 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
16834 d578-7b|Data General DASHER D578 in 7-bit mode,
16835 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
16837 #### Datamedia (dm)
16839 # Datamedia was headquartered in Nashua, New Hampshire until it went
16840 # out of business in 1993, but the ID plates on the terminals referred
16841 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
16842 # manufacturer which threw out all information about the terminals.
16845 cs10|colorscan|Datamedia Color Scan 10,
16848 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
16849 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16850 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16851 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
16852 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16853 cs10-w|Datamedia Color Scan 10 with 132 columns,
16855 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
16857 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
16858 dm1520|dm1521|datamedia 1520,
16860 cols#80, it#8, lines#24,
16861 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
16862 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16863 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
16865 # dm2500: this terminal has both <ich> and <smir>. Applications using
16866 # termcap/terminfo directly (rather than through ncurses) might be confused.
16867 dm2500|datamedia2500|datamedia 2500,
16870 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
16871 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
16872 dch1=\020\010\030\035$<10*>,
16873 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
16874 ich1=\020\034\030\035$<10*>,
16875 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
16876 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
16877 smdc=^P, smir=^P, smso=^N,
16878 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
16879 # also, has a meta-key.
16880 # From: <goldberger@su-csli.arpa>
16881 # (dmchat: ":MT:" changed to ":km:" -- esr)
16882 dmchat|dmchat version of datamedia 2500,
16884 dl1=\020\032\030\035$<2/>,
16885 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
16886 # (dm3025: ":MT:" changed to ":km:" -- esr)
16887 dm3025|datamedia 3025a,
16889 cols#80, it#8, lines#24,
16890 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16891 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
16892 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
16893 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
16894 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
16895 smir=\EP, smso=\EO1,
16896 dm3045|datamedia 3045a,
16897 OTbs, am, eo, km@, ul, xenl,
16898 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
16899 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
16900 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
16901 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
16903 # Datamedia DT80 soft switches:
16904 # 1 0=Jump 1=Smooth
16905 # Autorepeat 0=off 1=on
16906 # Screen 0=Dark 1=light
16907 # Cursor 0=u/l 1=block
16909 # 2 Margin Bell 0=off 1=on
16910 # Keyclick 0=off 1=on
16911 # ANSI/VT52 0=VT52 1=ANSI
16912 # Xon/Xoff 0=Off 1=On
16914 # 3 Shift3 0=Hash 1=UK Pound
16916 # Newline 0=Off 1=On
16917 # Interlace 0=Off 1=On
16919 # 4 Parity 0=Odd 1=Even
16920 # Parity 0=Off 1=On
16921 # Bits/Char 0=7 1=8
16922 # Power 0=60Hz 1=50Hz
16924 # 5 Line Interface 0=EIA 1=Loop
16925 # Aux Interface 0=EIA 1=Loop
16926 # Local Copy 0=Off 1=On
16929 # 6 Aux Parity 0=Odd 1=Even
16930 # Aux Parity 0=Off 1=On
16931 # Aux Bits/Char 0=7 1=8
16932 # CRT Saver 0=Off 1=On
16933 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
16934 dm80|dmdt80|dt80|datamedia dt80/1,
16935 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
16936 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16937 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
16938 rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
16939 smul=\E[4m, use=vt100+4bsd,
16940 # except in 132 column mode, where it needs a little padding.
16941 # This is still less padding than the vt100, and you can always turn on
16942 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
16944 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
16946 clear=\E[H\E[2J$<50/>, cud1=\n,
16947 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
16948 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
16949 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
16950 dt80-sas|Datamedia DT803/DTX for SAS usage,
16953 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
16954 bel=^G, clear=^L, cr=\r,
16955 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
16956 cub1=^H, cud1=\EB, cuf1=^\,
16957 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
16958 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
16959 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
16960 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
16961 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
16962 smso=\E$2\004, tbc=\E'0,
16964 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
16965 # These aren't end-all Excel termcaps; but do insert/delete char/line
16966 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
16967 # The naming convention has been bent somewhat, with the use of E? (where
16968 # E is for 'Excel') as # a name. This was done to distinguish the entries
16969 # from the other Datamedias in use here, and yet to associate a model of
16970 # the Excel terminals with the regular datamedia terminals that share
16971 # major characteristics.
16972 excel62|excel64|datamedia Excel 62,
16973 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
16974 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
16976 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
16977 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
16978 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
16980 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
16981 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
16982 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
16983 smir=\E[4h, use=dt80,
16987 # Falco Data Products
16988 # 440 Potrero Avenue
16989 # Sunnyvale, CA 940864-196
16990 # Vox: (800)-325-2648
16991 # Fax: (408)-745-7860
16992 # Net: techsup@charm.sys.falco.com
16994 # Current Falco models as of 1995 are generally ANSI-compatible and support
16995 # emulations of DEC VT-series, Wyse, and Televideo types.
16998 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
16999 # This terminal was released around 1983 and was discontinued long ago.
17000 # The standout and underline highlights are the same.
17001 falco|ts1|ts-1|falco ts-1,
17003 cols#80, it#8, lines#24,
17004 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17005 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17006 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
17007 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
17008 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
17009 smir=\Eq, smso=\Eg1, smul=\Eg1,
17010 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
17011 OTbs, am, da, db, mir, msgr, ul,
17012 cols#80, it#8, lines#24,
17013 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
17014 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
17015 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
17016 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
17017 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
17018 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
17019 smso=\Eg4, smul=\Eg1,
17020 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
17021 ts100|ts100-sp|falco ts100-sp,
17022 am, mir, msgr, xenl, xon,
17023 cols#80, it#8, lines#24, vt#3,
17024 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17025 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
17026 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
17027 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17028 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
17029 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
17030 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
17031 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
17032 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
17033 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17034 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
17035 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
17036 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17037 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17038 %;m%?%p9%t\016%e\017%;$<2>,
17039 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
17040 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
17042 ts100-ctxt|falco ts-100 saving context,
17043 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
17045 #### Florida Computer Graphics
17048 # Florida Computer Graphics Beacon System, using terminal emulator program
17049 # "host.com", as provided by FCG. This description is for an early release
17050 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
17053 # From: David Bryant <cbosg!djb> 1/7/83
17054 beacon|FCG Beacon System,
17057 bel=\ESTART\r\E37\r\EEND\r$<1>,
17058 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
17059 cub1=^H, cud1=\n, cuf1=\EV,
17060 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
17061 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
17062 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
17063 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
17064 rmul=\ESTART\r\E60\,0\r\EEND\r,
17065 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
17066 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
17067 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
17068 smul=\ESTART\r\E60\,1\r\EEND\r,
17073 # The f1720a differences from ANSI: no auto margin, destructive
17074 # tabs, # of lines, funny highlighting and underlining
17075 f1720|f1720a|fluke 1720A,
17077 cols#80, lines#16, xmc#1,
17078 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
17079 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
17080 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
17081 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
17082 smso=\E[7m, smul=\E[4m,
17084 #### Liberty Electronics (Freedom)
17086 # Liberty Electronics
17087 # 48089 Fremont Blvd
17089 # Vox: (510)-623-6000
17090 # Fax: (510)-623-7021
17092 # From: <faletti@berkeley.edu>
17093 # (f100: added empty <acsc> to suppress a tic warning;
17094 # made this relative to adm+sgr -- note that <invis> isn't
17095 # known to work for f100 but does on the f110. --esr)
17096 f100|freedom|freedom100|freedom model 100,
17097 OTbs, am, bw, hs, mir, msgr, xon,
17099 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
17100 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17101 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
17102 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
17103 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
17104 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
17105 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
17106 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17107 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
17108 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
17109 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17110 f100-rv|freedom-rv|freedom 100 in reverse video,
17111 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
17112 # The f110 and f200 have problems with vi(1). They use the ^V
17113 # code for the down cursor key. When kcud1 is defined in terminfo
17114 # as ^V, the Control Character Quoting capability (^V in insert mode)
17115 # is lost! It cannot be remapped in vi because it is necessary to enter
17116 # a ^V to to quote the ^V that is being remapped!!!
17118 # f110/f200 users will have to decide whether
17119 # to lose the down cursor key or the quoting capability. We will opt
17120 # initially for leaving the quoting capability out, since use of VI
17121 # is not generally applicable to most interactive applications
17122 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
17123 f110|freedom110|Liberty Freedom 110,
17126 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
17127 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
17128 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
17129 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17130 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
17131 smso=\EG<, tsl=\Ef, use=f100,
17132 f110-14|Liberty Freedom 110 14inch,
17134 f110-w|Liberty Freedom 110 - 132 cols,
17135 cols#132, use=f110,
17136 f110-14w|Liberty Freedom 110 14in/132 cols,
17139 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17140 f200|freedom200|Liberty Freedom 200,
17141 OTbs, am, eslok, hs, mir, msgr, xon,
17142 cols#80, it#8, lines#24, wsl#80,
17143 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
17144 clear=^Z, cnorm=\E.1, cr=\r,
17145 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
17146 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17147 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
17148 flash=\Eo$<200/>\En, fsl=\r, home=^^,
17149 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
17150 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
17151 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17152 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17153 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17154 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
17155 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17156 f200-w|Liberty Freedom 200 - 132 cols,
17157 cols#132, use=f200,
17158 # The f200 has the ability to reprogram the down cursor key. The key is
17159 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
17160 # so powering the terminal off and on will not cause the change to be lost.
17161 f200vi|Liberty Freedom 200 for vi,
17162 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
17163 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
17164 cols#132, use=f200vi,
17168 # Graphon Corporation
17169 # 544 Division Street
17170 # Campbell, CA 95008
17171 # Vox: (408)-370-4080
17172 # Fax: (408)-370-5047
17173 # Net: troy@graphon.com (Troy Morrison)
17176 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
17177 # including one odd hybrid that starts out life on power-up as a character
17178 # terminal, than can be switched to X graphics mode (driven over the serial
17179 # line) by an escape sequence. No info on this beast yet.
17180 # (go140: I added <rmam>/<smam> based on the init string -- esr)
17181 go140|graphon go-140,
17183 cols#80, it#8, lines#24,
17184 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
17185 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17186 ed=\E[J$<10/>, el=\E[K, ht=^I,
17187 if=/usr/share/tabset/vt100, il1=\E[L,
17188 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17189 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
17190 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
17191 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
17192 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
17193 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17194 go140w|graphon go-140 in 132 column mode,
17197 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17199 # Hacked up vt200 termcap to handle GO-225/VT220
17200 # From: <edm@nwnexus.WA.COM>
17201 # (go225: I added <rmam>/<smam> based on the init string -- esr)
17202 go225|go-225|Graphon 225,
17203 OTbs, am, mir, xenl,
17204 cols#80, it#8, lines#25, vt#3,
17205 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
17206 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
17207 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17208 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
17209 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
17210 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17211 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
17212 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
17213 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
17214 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
17215 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
17216 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
17218 #### Harris (Beehive)
17220 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
17221 # Their terminal group is ancient history now (1995) though the parent
17222 # company is still in business.
17225 # Beehive documentation is undated and marked Preliminary and has no figures
17226 # so we must have early Superbee2 (Model 600, according to phone conversation
17227 # with mfr.). It has proved reliable except for some missing padding
17228 # (notably after \EK and <nl> at bottom of screen).
17230 # The key idea is that AEP mode is poison for <cup> & that US's in
17231 # the local memory should be avoided like the plague. That means
17232 # that the 2048 character local buffer is used as 25 lines of 80
17233 # characters, period. No scrolling local memory, folks. It also
17234 # appears that we cannot use naked INS LINE feature since it uses
17235 # US. The sbi fakes <il1> with an 80-space insert that may be too
17236 # slow at low speeds; also spaces get converted to \040 which is
17237 # too long for some programs (not vi). DEL LINE is ok but slow.
17239 # The <nl> string is designed for last line of screen ONLY; cup to
17240 # 25th line corrects the motion inherent in scrolling to Page 1.
17242 # There is one understood bug. It is that the screen appears to
17243 # pop to a new (blank) page after a <nel>, or leave a half-line
17244 # ellipsis to a quad that is the extra 48 memory locations. The
17245 # data received is dumped into memory but not displayed. Not to
17246 # worry if <cup> is being used; the lines not displayed will be,
17247 # whenever the cursor is moved up there. Since <cup> is addressed
17248 # relative to MEMORY of window, nothing is lost; but beware of
17249 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
17250 # therefore, is setenv MORE -c .
17252 # WARNING: Not all features tested.
17254 # Timings are assembled from 3 sources. Some timings may reflect
17255 # SB2/Model 300 that were used if more conservative.
17256 # Tested on a Model 600 at 1200 and 9600 bd.
17258 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
17259 # placed on the keyboard and useless because of AEP, is made
17260 # into a backspace key. In use ESC must be pressed twice (to send)
17261 # and sending ^C must be prefixed by ESC to avoid that weird
17262 # transmit mode associated with ENTER key.
17264 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
17265 # the screen, then it has dropped into ENTER mode; hit
17266 # RESET--ONLINE--!tset.
17268 # As delivered this machine has a FATAL feature that will throw
17269 # it into that strange transmit state (SPOW) if the space bar is
17270 # hit after a CR is received, but before receiving a LF (or a
17273 # The circuits MUST be modified to eliminate the SPOW latch.
17274 # This is done by strapping on chip A46 of the I/O board; cut
17275 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
17276 # chip. This mod has been checked out on a Mod 600 of Superbee II.
17277 # With this modification absurdly high timings on cr are
17280 # NOTE WELL that the rear panel switch should be set to CR/LF,
17283 sb1|beehive superbee,
17284 OTbs, am, bw, da, db, mir, ul, xsb,
17285 cols#80, lines#25, xmc#1,
17286 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
17287 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
17288 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
17289 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
17290 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17291 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17292 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17293 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
17294 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
17295 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
17296 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
17297 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
17298 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
17299 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
17300 smso=\E_1, smul=\E_0, tbc=\E3,
17301 sbi|superbee|beehive superbee at Indiana U.,
17303 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
17305 # Alternate (older) description of Superbee - f1=escape, f2=^C.
17306 # Note: there are at least 3 kinds of superbees in the world. The sb1
17307 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
17308 # The sb3 puts garbage on the bottom of the screen when you scroll with
17309 # the switch in the back set to CRLF instead of AEP. This description
17310 # is tested on the sb2 but should work on all with either switch setting.
17311 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
17312 # the other two if you want to try to hit that tiny escape key.
17313 # This description is tricky: being able to use cup depends on there being
17314 # 2048 bytes of memory and the hairy <nl> string.
17315 superbee-xsb|beehive super bee,
17317 cols#80, it#8, lines#25,
17318 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
17319 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
17320 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
17321 home=\EH, ht=^I, hts=\E1,
17322 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
17323 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
17324 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
17325 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
17326 # This loses on lines > 80 chars long, use at your own risk
17327 superbeeic|super bee with insert char,
17328 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
17329 sb2|sb3|fixed superbee,
17330 xsb@, use=superbee,
17332 #### Beehive Medical Electronics
17334 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
17335 # Regarding your question though; Beehive terminals weren't made by Harris.
17336 # They were made by Beehive Medical Electronics in Utah. They went out of
17337 # business in the early '80s.
17339 # (OK, then, I don't know why a couple of these say "harris beehive".)
17342 # Reports are that most of these Beehive entries (except superbee) have not
17343 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
17345 # (bee: <ich1> was empty, which is obviously bogus -- esr)
17346 beehive|bee|harris beehive,
17349 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
17350 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
17351 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
17352 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17353 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
17354 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
17355 smir=\EQ, smso=\EdP, smul=\Ed`,
17356 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
17357 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
17358 # look at those spaces in <rmso>/<smso>. Seems strange to me...
17359 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
17360 # really care, cook up one using ^F -- esr)
17361 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
17363 cols#80, it#8, lines#20,
17364 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
17365 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
17366 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
17367 beehive4|bh4|beehive 4,
17370 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
17371 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
17372 # There was an early Australian kit-built computer called a "Microbee".
17373 # It's not clear whether this is for one of those or for a relative
17375 microb|microbee|micro bee series,
17377 cols#80, it#8, lines#24,
17378 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17379 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17380 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
17381 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
17382 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
17383 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
17385 # 8675, 8686, and bee from Cyrus Rahman
17386 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
17387 ha8675|harris 8675,
17388 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
17389 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
17390 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
17392 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
17394 ha8686|harris 8686,
17395 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
17396 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
17397 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
17399 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
17400 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
17401 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
17402 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
17406 # Hazeltine appears to be out of the terminal business as of 1995. These
17407 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
17408 # Harris. They have a hazeltine.com domain (but no web page there ) and can
17412 # 450 East Pulaski Road
17413 # Greenlawn, New York 11740
17415 # As late as 1993, manuals for the terminal product line could still be
17418 # TRW Customer Service Division
17421 # Fairfield, NJ 07007-2078
17423 # They're now (1998) a subsidiary of General Electric, operating under the
17424 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
17425 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
17428 # Since <cuf1> is blank, when you want to erase something you
17429 # are out of luck. You will have to do ^L's a lot to
17430 # redraw the screen. h1000 is untested. It doesn't work in
17431 # vi - this terminal is too dumb for even vi. (The code is
17432 # there but it isn't debugged for this case.)
17433 hz1000|hazeltine 1000,
17436 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
17438 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
17439 hz1420|hazeltine 1420,
17442 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
17443 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
17444 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
17446 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
17447 # freakout with out-of-range args and tn3270. No hz since it needs to
17449 hz1500|hazeltine 1500,
17452 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17453 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
17454 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
17455 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
17456 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
17457 # h1510 assumed to be in sane escape mode. Else use h1500.
17458 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
17459 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
17460 # removed incorrect and overridden ":do=^J:" -- esr)
17461 hz1510|hazeltine 1510,
17464 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
17465 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
17466 el=\E^O, il1=\E^Z, ind=\n,
17468 # The following switch settings are assumed for normal operation:
17469 # FULL CR U/L_CASE ESCAPE
17470 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
17471 # Other switches may be set for operator convenience or communication
17473 hz1520|Hazeltine 1520,
17474 OTbs, am, bw, msgr,
17476 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
17477 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
17478 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
17479 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
17480 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
17481 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
17482 # This version works with the escape switch off
17483 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
17484 hz1520-noesc|hazeltine 1520,
17487 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17488 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
17489 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
17490 # Note: the h1552 appears to be the first Hazeltine terminal which
17491 # is not braindamaged. It has tildes and backprimes and everything!
17492 # Be sure the auto lf/cr switch is set to cr.
17493 hz1552|hazeltine 1552,
17495 cud1=\n, dl1=\EO, il1=\EE, lf1=blue, lf2=red, lf3=green,
17497 hz1552-rv|hazeltine 1552 reverse video,
17498 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
17499 # Note: h2000 won't work well because of a clash between upper case and ~'s.
17500 hz2000|hazeltine 2000,
17503 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
17504 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
17505 il1=~\032$<6>, ind=\n, pad=^?,
17506 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
17507 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
17508 # to work ok. There is one problem though if one types a lot of garbage
17509 # characters very fast vi seems not able to keep up and hangs while trying
17510 # to insert. That's in insert mode while trying to insert in the middle of
17511 # a line. It might be because the Esprit doesn't have insert char and delete
17512 # char as a built in function. Vi has to delete to end of line and then
17513 # redraw the rest of the line.
17514 esprit|Hazeltine Esprit I,
17517 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
17518 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
17519 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
17520 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
17521 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
17522 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
17523 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
17524 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
17525 esprit-am|hazeltine esprit auto-margin,
17527 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
17528 # Vi it seems always wants to send a control J for "do" and it turned out
17529 # that the terminal would work somewhat if the auto LF/CR was turned off.
17530 # (hmod1: removed :dn=~^K: -- esr)
17531 hmod1|Hazeltine Modular 1,
17534 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17535 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
17536 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
17537 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
17539 # Hazeltine Executive 80 Model 30 (1554?)
17540 # from Will Martin <control@ALMSA-1.ARPA> via BRL
17541 # Like VT100, except for different "am" behavior.
17542 hazel|exec80|h80|he80|Hazeltine Executive 80,
17544 cols#80, it#8, lines#24, vt#3,
17545 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
17546 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
17547 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
17548 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
17549 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
17550 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
17551 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
17552 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
17553 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
17554 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
17555 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17556 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
17562 ibm327x|line mode IBM 3270 style,
17564 clear=\r\n, el=\r, home=\r,
17566 ibm3101|i3101|IBM 3101-10,
17569 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17570 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17571 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
17572 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
17573 ibm3151|IBM 3151 display,
17574 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
17575 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17576 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17577 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
17578 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
17579 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
17580 # removed kend, knp, kpp -TD
17582 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17583 # Added ich1 (kich1 without ich1 doesn't make sense).
17584 # Added il1 (kil1 without il1 doesn't make sense).
17585 # Added xon (terminal uses XON/XOFF flow control).
17587 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
17588 OTbs, am, mir, msgr, xon,
17589 cols#80, it#8, lines#24,
17590 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
17592 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
17593 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17594 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
17595 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
17596 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
17597 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
17598 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
17599 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
17600 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
17601 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
17602 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
17603 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
17604 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
17605 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
17606 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17607 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17608 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
17609 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
17611 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
17612 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
17614 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17615 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
17618 ibm3162|IBM 3162 display,
17619 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
17620 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
17623 # This really should not use setab/setaf, but it is clear that the
17624 # original terminfo does not toggle red/blue colors as in setb/setf.
17625 ibm3164|i3164|IBM 3164,
17627 colors#8, pairs#64,
17628 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
17629 setab=\E4 %p1%{64}%+%c,
17630 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
17631 smcup=\E!9/N\E>B, use=ibm3161,
17633 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
17635 cols#80, it#8, lines#25,
17636 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
17638 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
17639 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17640 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17641 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
17642 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
17643 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17644 invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q,
17645 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
17646 ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q,
17647 kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q,
17648 kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q,
17649 kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q,
17650 kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q,
17651 kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q,
17652 kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q,
17653 kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q,
17654 kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q,
17655 kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H,
17656 kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q,
17657 kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\E[T,
17658 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec,
17659 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
17661 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17664 ibmaed|IBM Experimental display,
17665 OTbs, am, eo, msgr,
17666 cols#80, it#8, lines#52,
17667 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
17668 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17669 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
17670 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17671 rmso=\E0, sgr0=\E0, smso=\E0,
17672 ibm-apl|apl|IBM apl terminal simulator,
17673 lines#25, use=dm1520,
17674 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
17675 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
17676 ibmmono|IBM workstation monochrome,
17678 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
17679 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
17680 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
17681 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
17682 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
17683 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
17685 ibmega|IBM Enhanced Color Display,
17686 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
17687 nel=\r\n, use=ibmmono,
17688 # This color scheme is assumed in some recent IBM terminal descriptions
17689 # (green on black, emulated on a 16-color terminal).
17690 ibm+color|IBM color definitions,
17691 colors#8, ncv#3, pairs#64,
17693 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
17694 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
17695 %=%t46m%e%p1%{7}%=%t107m%;,
17696 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
17697 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
17698 %=%t36m%e%p1%{7}%=%t97m%;,
17699 ibm+16color|IBM aixterm color definitions,
17700 colors#16, pairs#0x100,
17701 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
17702 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
17703 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
17704 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
17705 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
17706 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
17707 ibm5154|IBM 5154 Color display,
17708 colors#8, ncv@, pairs#64,
17709 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
17711 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
17712 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
17714 ibmvga-c|IBM VGA display color termcap,
17715 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
17716 nel=\r\n, use=ibmega-c,
17717 ibmvga|IBM VGA display,
17718 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
17719 nel=\r\n, use=ibmega,
17720 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
17721 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
17723 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
17724 ibm6155|IBM 6155 Black & White display,
17725 blink@, bold@, use=ibm5151,
17726 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
17727 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
17729 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
17730 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
17732 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
17734 ibm6154|IBM 6154 Color displays,
17735 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
17736 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
17738 sgr0=\E[0;10m, use=ibm5154,
17739 ibm6153|IBM 6153 Black & White display,
17740 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
17741 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
17743 sgr0=\E[0;10m, use=ibm5151,
17744 ibm6153-90|IBM 6153 Black & White display,
17746 blink@, bold@, use=ibm5151,
17747 ibm6153-40|IBM 6153 Black & White display,
17748 cols#40, lines#12, use=ibm6153-90,
17749 ibm8512|ibm8513|IBM color VGA Terminal,
17751 cols#80, it#8, lines#25,
17752 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
17753 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
17754 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
17755 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
17756 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
17757 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
17758 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
17759 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
17760 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
17761 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
17762 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
17763 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
17764 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17766 hft-c|HFT with Color,
17767 colors#8, pairs#64,
17768 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
17769 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
17770 use=ibm5151, use=ibm+color,
17771 hft-c-old|HFT with Color PC850,
17772 colors#8, pairs#64,
17773 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
17775 hft-old|AIWS High Function Terminal,
17778 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
17779 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17780 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17781 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
17782 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17783 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
17784 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
17785 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
17786 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
17787 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
17788 ibm-system1|system1|ibm system/1 computer,
17791 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
17792 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
17794 # lft-pc850 : IBM Low Function Terminal Device
17795 # lft "supports" underline, bold, and blink in the sense that the lft code
17796 # sets all the right bits. HOWEVER, depending upon the adapter, these
17797 # attributes may or may not be supported by the device driver.
17798 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
17800 cols#80, it#8, lines#25,
17801 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
17803 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
17804 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17805 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17806 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17807 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
17808 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
17809 il1=\E[L, ind=\ED, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
17810 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17811 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
17812 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
17813 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
17814 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
17815 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
17816 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
17817 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
17818 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
17819 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
17820 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
17821 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
17822 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
17823 krmir=\E[4l, rev=\E[7m, ri=\EL, rmacs=\E(B, rmir=\E[4l,
17824 rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
17825 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
17826 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
17827 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17828 tbc=\E[3g, use=ecma+index,
17829 # "Megapel" refers to the display adapter, which was used with the IBM RT
17831 ibm5081|hft|IBM Megapel Color display,
17832 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
17833 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
17834 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
17837 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
17839 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
17841 ibm8514|IBM 8514/a color VGA display,
17843 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
17844 ibm8514-c|IBM 8514 color display with standout and underline,
17847 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
17848 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
17852 # AIX entries. IBM ships these with AIX 3.2.5.
17853 # -- added rc, sc based on manpage -TD
17854 # -- added rmacs, smacs based on manpage -TD
17855 # Note that we could use ibm+16color, but that is not how IBM defines this one.
17856 aixterm|IBM Aixterm Terminal Emulator,
17858 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
17859 fsl=\E[?F, rc=\E8, ri@, rmacs=\E(B, s0ds=\E(B, s1ds=\E(0,
17861 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
17862 %t;8%;m%?%p9%t\E(0%e\E(B%;,
17863 sgr0=\E[0;10m\E(B, smacs=\E(0, tsl=\E[?%p1%dT,
17865 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
17867 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
17868 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
17869 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
17870 %t;8%;m%?%p9%t\E(0%e\E(B%;,
17871 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
17872 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
17874 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
17875 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
17877 tsl=\E[?%p1%dT, use=ibm6153,
17878 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
17880 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
17882 sgr0=\E[m, smacs@, use=aixterm,
17883 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
17885 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
17887 sgr0=\E[m, smacs@, use=aixterm-m,
17889 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
17890 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
17891 use=ibm+16color, use=aixterm,
17893 #### Infoton/General Terminal Corp.
17896 # gt100 sounds like something DEC would come out with. Let's hope they don't.
17897 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
17900 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17901 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
17902 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
17903 ind=\n, rmso=\Ea, smso=\Eb,
17907 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
17908 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
17909 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
17910 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
17911 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
17915 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
17916 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
17917 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
17921 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
17922 ed=^K, ind=\n, ll=^H^\,
17924 # The ICL6402 was actually the Kokusai Display System 6402.
17925 # The 6404 was the KDS7372 (color version of the 6402).
17927 # ICL6404 control codes follow:
17930 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17931 #ctrl-A set SOM position at cursor position
17934 #ctrl-I Horizontal tab
17937 #ctrl-L Cursor right
17938 #ctrl-M Carriage return
17939 #ctrl-N Disable xon/xoff to host
17940 #ctrl-O Enable xon/xoff to host
17941 #ctrl-R Enable bidirectional mode
17942 #ctrl-T Disable bidirectional mode
17943 #ctrl-V Cursor down
17944 #ctrl-Z Clear unprotected data to insert char
17945 #ctrl-^ Cursor home
17948 #ESC lead-in char for multiple character command
17950 #ESC space R execute power on sequence
17951 #ESC ! p1 p2 define scroll region:
17952 # p1 = scroll top line: 20h - 37h
17953 # p1 = scroll bottom line: 20h - 37h
17954 #ESC " unlock keyboard
17955 #ESC # lock keyboard
17956 #ESC $ Semi-graphics mode on
17957 #ESC % Semi-graphics mode off
17958 #ESC & protect mode on
17959 #ESC ' protect mode off
17960 #ESC ( write protect mode off (full intensity)
17961 #ESC ) write protect mode on (half intensity)
17963 #ESC * clear screen
17964 #ESC + clear unprotected data to insert char
17965 #ESC , clear unprotected data to half intensity spaces
17966 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
17967 # p1 = page number 0 - 3
17968 # p2 = row 20h - 7fh
17969 # p3 = column (lo) 20h - 7fh
17970 # p4 = column (hi) 20h - 21h (only 132 col)
17971 #ESC . p1 set cursor style:
17972 # p1 = 0 invisible cursor
17973 # p1 = 1 block blinking cursor
17974 # p1 = 2 block steady cursor
17975 # p1 = 3 underline blinking cursor
17976 # p1 = 4 underline steady cursor
17977 #ESC / transmit cursor location (page, row, column)
17978 #ESC 0 p1 p2 p3 p4 program edit key:
17979 # p1 = edit key code: '@'-'S', '`'-'s'
17980 # p2 p3 p4 = program data (3 bytes)
17983 #ESC 2 clear tab at cursor
17984 #ESC 3 clear all tabs
17985 #ESC 4 send unprotect line to cursor
17986 #ESC 5 send unprotect page to cursor
17987 #ESC 6 send line to cursor
17988 #ESC 7 send page to cursor
17989 #ESC 8 n set scroll mode:
17990 # n = 0 set jump scroll
17991 # n = 1 set smooth scroll
17992 #ESC 9 n control display:
17993 # n = 0 display off
17995 #ESC : clear unprotected data to null
17996 #ESC ; clear unprotected data to insert char
17999 #ESC = p1 p2 address cursor to row, column
18000 # p1 = row 20h - 7fh
18001 # p2 = column (lo) 20h - 7fh
18002 # p3 = column (hi) 20h - 21h (only 132 col)
18003 #ESC > keyclick off
18004 #ESC ? transmit cursor location (row, column)
18006 #ESC @ copy print mode on
18007 #ESC A copy print mode off
18008 #ESC B block mode on
18009 #ESC C block mode off (conversation mode)
18010 #ESC D F set full duplex
18011 #ESC D H set half duplex
18013 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
18014 # 0 = black, 1 = red, 2 = green, 3 = yellow
18015 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
18016 #ESC G n set serial field attribute (n = 30h - 3Fh)
18017 #ESC H n full graphics mode:
18018 # n = 0 exit full graphics mode
18019 # n = 1 enter full graphics mode
18022 #ESC K forward page
18024 #ESC L unformatted page print
18025 #ESC M L move window left (132 col mode only)
18026 #ESC M R move window right (132 col mode only)
18027 #ESC N set page edit (clear line edit)
18028 #ESC O set line edit (clear page edit)
18029 #ESC P formatted page print
18030 #ESC Q character insert
18032 #ESC S send message unprotected only
18033 #ESC T erase line to insert char
18034 #ESC U set monitor mode (see ESC X, ESC u)
18036 #ESC V n select video attribute mode:
18037 # n = 0 serial field attribute mode
18038 # n = 1 parallel character attribute mode
18039 #ESC V 2 n define line attribute:
18040 # n = 0 single width single height
18041 # n = 1 single width double height
18042 # n = 2 double width single height
18043 # n = 3 double width double height
18044 #ESC V 3 n select character font:
18045 # n = 0 system font
18046 # n = 1 user defined font
18047 #ESC V 4 n select screen mode:
18048 # n = 0 page screen mode
18049 # n = 1 virtual screen mode
18050 #ESC V 5 n control mouse mode:
18051 # n = 0 disable mouse
18052 # n = 1 enable sample mode
18053 # n = 2 send mouse information
18054 # n = 3 enable request mode
18055 #ESC W character delete
18056 #ESC X clear monitor mode (see ESC U, ESC u)
18057 #ESC Y erase page to insert char
18059 #ESC Z n send user/status line:
18060 # n = 0 send user line
18061 # n = 1 send status line
18062 # n = 2 send terminal ID
18063 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
18067 # 3 = blink blank (= blank)
18069 # 5 = reverse blank
18070 # 6 = reverse blink
18071 # 7 = reverse blink blank (= reverse blank)
18073 # 9 = underline blank
18074 # : = underline blink
18075 # ; = underline blink blank
18076 # < = reverse underline
18077 # = = reverse underline blank
18078 # > = reverse underline blink
18079 # ? = reverse underline blink blank
18080 # p2, p3: f/grnd, b/grnd colour
18081 # (see ESC F for colours)
18082 # use ZZ for mono, eg.
18083 # ESC [ 0 Z Z for normal
18084 # ESC [ 4 Z Z for inverse etc.
18086 #ESC \ n set page size:
18087 # n = 1 24 lines/page
18088 # n = 2 48 lines/page
18089 # n = 3 72 lines/page
18090 # n = 4 96 lines/page
18091 #ESC ] n set Wordstar mode:
18092 # n = 0 normal (KDS7372) mode
18093 # n = 1 Wordstar mode
18095 #ESC b set foreground colour screen
18097 #ESC c n enter self-test mode:
18098 # n = 0 exit self test mode
18102 # n = 4 screen display test
18103 # n = 5 main/printer port test
18104 # n = 6 mouse port test
18105 # n = 7 graphics board test
18106 # n = 8 graphics memory test
18107 # n = 9 display all 'E'
18108 # n = : display all 'H'
18109 #ESC d set background colour screen
18111 #ESC e n program insert char (n = insert char)
18112 #ESC f text CR load user status line with 'text'
18114 #ESC g display user status line on 25th line
18115 #ESC h display system status line on 25th line
18117 #ESC j reverse linefeed
18118 #ESC k n duplex/local edit mode:
18119 # n = 0 duplex edit mode
18120 # n = 1 local edit mode
18121 #ESC l n select virtual screen:
18124 #ESC m save current config to NVRAM
18125 #ESC n p1 select display screen:
18130 #ESC o p1 p2 set characters/line and attribute:
18131 # p1 = 0 80 chars/line
18133 #ESC o p1 p2 set characters/line and attribute:
18134 # p1 = 0 80 chars/line
18135 # p1 = 1 132 chars/line
18136 # p2 = 0 single width single height
18137 # p2 = 1 single width double height
18138 # p2 = 2 double width single height
18139 # p2 = 3 double width double height
18141 #ESC q insert mode on
18142 #ESC r edit mode on
18143 #ESC s send message all
18144 #ESC t erase line to null
18145 #ESC u clear monitor mode (see ESC U, ESC X)
18146 #ESC v autopage mode on
18147 #ESC w autopage mode off
18148 #ESC x p1 p2 p3 define delimiter code...
18149 #ESC y erase page to null
18151 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
18152 # p1 = starting row
18153 # p2 = starting column
18157 #ESC { p1 p2 p3 p4 configure main port
18158 # (baud, stop bits, parity, word length)
18160 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
18161 # p1 = function key code:
18162 # '1' - ';' normal f1- f11
18163 # '<' - 'F' shifted f1 - f11
18164 # p2 = program mode:
18168 # Ctrl-Y = terminator
18169 # (use Ctrl-P to escape ^P, ^Y )
18171 #ESC } p1 p2 p3 p4 configure printer port
18172 # (baud, stop bits, parity, word length)
18173 #ESC ~ send system status
18175 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
18177 # Entry is by esr going solely on above information and is UNTESTED.
18178 # This actually looks a lot like a Televideo 9xx.
18179 # This entry uses page 0 and is monochrome; I'm not brave enough to try
18180 # to make color work without a test terminal. The <am> capability is a guess.
18181 # The initialization string sets conversation mode, blinking underline cursor,
18182 # full duplex, parallel attribute mode, display user status line, white
18183 # foreground, black background, normal highlight.
18185 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
18188 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
18189 cnorm=\E.3, cr=\r, csr=\E!%p1%{32}%+%c%p2%{32}%+%c,
18190 cub1=^H, cud1=^V, cuf1=^L,
18191 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
18192 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
18193 hts=\E1, il1=\EE, invis=\E[1ZZ,
18194 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
18195 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
18196 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
18197 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
18198 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
18199 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
18200 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
18201 rs2=\Eo1, use=icl6404,
18203 #### Interactive Systems Corp
18205 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
18206 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
18207 # bought out by Sun.
18210 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
18211 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
18212 # ":le=^_:" later overridden -- esr)
18213 intext|Interactive Systems Corporation modified owl 1200,
18215 cols#80, it#8, lines#24, xmc#1,
18216 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
18217 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
18218 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
18219 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
18220 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
18221 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
18222 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
18223 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036:\264\026%%,
18225 intext2|intextii|INTERACTIVE modified owl 1251,
18227 cols#80, lines#24, xmc#0,
18228 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
18229 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18230 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
18231 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
18232 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
18233 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
18234 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
18235 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
18236 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
18237 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
18238 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
18241 #### Kimtron (abm, kt)
18243 # Kimtron seems to be history, but as March 1998 these people are still
18244 # offering repair services for Kimtron equipment:
18246 # Com/Pair Monitor Service
18247 # 1105 N. Cliff Ave.
18248 # Sioux Falls, South Dakota 57103
18250 # WATS voice: 1-800/398-4946
18251 # POTS fax: +1 605/338-8709
18252 # POTS voice: +1 605/338-9650
18253 # Email: <compair@sd.cybernex.net>
18254 # Internet/Web: <http://www.com-pair.com>
18256 # Kimtron entries include (undocumented) codes for: enter dim mode,
18257 # enter bold mode, enter reverse mode, turn off all attributes.
18260 # Kimtron ABM 85 added by Dual Systems
18261 # (abm85: removed duplicated ":kd=^J:" -- esr)
18262 abm85|Kimtron ABM 85,
18263 OTbs, am, bw, msgr,
18264 cols#80, it#8, lines#24, xmc#1,
18265 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
18266 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18267 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
18268 if=/usr/share/tabset/stdcrt, il1=\EE,
18269 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
18270 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
18271 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
18272 # Kimtron ABM 85H added by Dual Systems.
18273 # Some notes about the abm85h entries:
18274 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
18275 # firmware revs prior to SP51
18276 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
18277 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
18278 # in some places and NOT software settable i.e., <is2> can't fix it)
18279 # 3) In 85h mode, the arrow keys and special functions transmit when
18280 # the terminal is in dup-edit, and work only locally in local-edit.
18281 # Vi won't swallow `del char' for instance, but <smcup> turns on
18282 # dup-edit anyway so that the arrow keys will work right. If the
18283 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
18284 # <is2>. Note that 920E mode does not have software commands to toggle
18285 # between dup and local edit, so you get whatever was set last on the
18287 # 4) <flash> attribute is nice, but seems too slow to work correctly
18289 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
18290 # are selected, the <xmc@> entry should be removed.
18291 # 6) auto new-line should be on (selectable from setup mode only)
18293 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
18294 abm85h|Kimtron ABM 85H native mode,
18297 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
18299 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
18301 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
18303 abm85e|Kimtron ABM 85H in 920E mode,
18305 bel=^G, dim=\E), flash@,
18306 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
18308 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18309 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
18312 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
18314 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18315 # From: <malman@bbn-vax.arpa>
18316 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
18317 kt7|kimtron model kt-7,
18319 cols#80, it#8, lines#24,
18320 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
18321 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18322 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
18323 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
18324 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
18325 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
18326 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18327 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18328 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
18329 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
18330 # other kt7 entry and the adjacent key capabilities). Removed EE which is
18331 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
18332 # but we can't figure out what.
18333 kt7ix|kimtron model kt-7 or 70 in IX mode,
18335 cols#80, it#8, lines#25,
18336 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
18337 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
18338 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18339 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
18340 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
18341 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
18342 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
18343 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
18344 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18345 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
18346 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
18347 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
18349 #### Microdata/MDIS
18351 # This was a line of terminals made by McDonnell-Douglas Information Systems.
18352 # These entries come direct from MDIS documentation. I have edited them only
18353 # to move primary names of the form p[0-9] * to aliases, and to comment out
18354 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
18355 # also removed the change history; the last version indicates this is
18356 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
18359 # McDonnell Information Systems Terminal Family History
18360 # =========================================
18362 # Prism-1, Prism-2 and P99:
18363 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
18365 # Prism-4 and Prism-5:
18366 # Slightly less ancient range of Microdata terminals. Follow-on from
18367 # Prism-2, but with many enhancements. P5 has eight display pages.
18370 # A special terminal for use with library systems, primarily in Germany.
18371 # Limited numbers. Similar functionality to P5 (except attributes?).
18373 # Prism-7, Prism-8 and Prism-9:
18374 # More recent range of MDIS terminals, in which P7 and P8
18375 # replace the P4 & P5, with added functionality, and P9 is the flagship.
18376 # The P9 has two emulation modes - P8 and ANSI - and includes a
18377 # large number of the DEC VT220 control sequences. Both
18378 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
18380 # Prism-12 and Prism-14:
18381 # Latest range, functionally very similar to the P9. The P14 has a
18382 # black-on-white overscanning screen.
18384 # The terminfo definitions given here are:
18386 # p2 - Prism-2 (or Prism-1 or P99).
18388 # p4 - Prism-4 (and older P7s & P8s).
18389 # p5 - Prism-5 (or Prism-6).
18392 # p8 - Prism-8 (in national or multinational mode).
18393 # p8-w - 132 column version of p8.
18394 # p9 - Prism-9 in ANSI mode.
18395 # p9-w - 132 column version of p9.
18396 # p9-8 - Prism-9 in Prism-8 emulation mode.
18397 # p9-8-w - As p9-8, but with 132 columns.
18399 # p12 - Prism-12 in ANSI mode.
18400 # p12-w - 132 column version of p12.
18401 # p12-m - Prism-12 in MDC emulation mode.
18402 # p12-m-w - As p12-m, but with 132 columns.
18403 # p14 - Prism-14 in ANSI mode.
18404 # p14-w - 132 column version of p14.
18405 # p14-m - Prism-14 in MDC emulation mode.
18406 # p14-m-w - As p14-m, but with 132 columns.
18411 # Includes Prism-1 and basic P99 without SP or MP loaded.
18412 # The simplest form of Prism-type terminal.
18413 # Basic cursor movement and clearing operations only.
18414 # No video attributes.
18416 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18417 # value up, followed by backspace.
18419 prism2|MDC Prism-2,
18422 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18423 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18424 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18425 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
18426 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18427 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18428 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
18433 # Includes early versions of P7 & P8.
18434 # Basic family definition for most Prisms (except P2 and P9 ANSI).
18436 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18437 # value up, followed by backspace.
18438 # Cursor key definitions removed because they interfere with vi and csh keys.
18440 prism4|p4|P4|MDC Prism-4,
18441 am, bw, hs, mc5i, msgr,
18442 cols#80, lines#24, wsl#72, xmc#1,
18443 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
18444 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18445 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18446 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18447 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
18448 fsl=\035\345, home=^A,
18449 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18450 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18451 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
18452 rev=^CD, rmso=^C\s, rmul=^C\s,
18453 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
18454 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
18455 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
18456 vpa=\013%p1%{32}%+%c,
18461 # Same definition as p4. Includes Prism-6 (not tested!).
18462 # Does not use any multi-page features.
18464 prism5|p5|P5|MDC Prism-5,
18470 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
18472 # Use p4 for very early models of P7.
18473 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18475 prism7|p7|P7|MDC Prism-7,
18476 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
18481 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
18482 # Supports national and multinational character sets.
18484 # Alternate char set operations only work in multinational mode.
18485 # Use p4 for very early models of P8.
18486 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18487 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
18489 prism8|p8|P8|MDC Prism-8,
18490 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
18491 vpa=\E[%i%p1%dd, use=p4,
18493 # p8-w: Prism-8 in 132 column mode
18494 # --------------------------------
18496 # 'Wide' version of p8.
18498 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
18500 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
18502 is2=\E[<12h\E[<14h, use=p8,
18504 # p9: Prism-9 in ANSI mode
18505 # -------------------------
18507 # The "flagship" model of this generation of terminals.
18508 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
18510 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
18511 # Fixes to deal with terminal firmware bugs:
18512 # . 'ri' uses insert-line since rev index doesn't always
18513 # . 'sgr0' has extra '0' since esc[m fails
18514 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
18515 # Not covered in the current definition:
18517 # . Programming Fn keys
18518 # . Graphic characters (defaults correctly to vt100)
18519 # . Padding values (sets xon)
18520 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
18522 prism9|p9|P9|MDC Prism-9 in ANSII mode,
18523 am, bw, hs, msgr, xenl, xon,
18524 cols#80, it#8, lines#24, vt#3, wsl#72,
18525 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
18526 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
18527 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18528 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18529 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18530 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
18531 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
18532 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
18533 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
18534 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
18535 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
18536 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
18537 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
18538 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18539 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
18540 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
18541 rmso=\E[27m, rmul=\E[24m,
18542 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
18545 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
18546 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
18547 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18548 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
18551 # p9-w: Prism-9 in 132 column mode
18552 # --------------------------------
18554 # 'Wide' version of p9.
18556 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
18558 is2=\E[&p\E[<12l\E F\E[<14h,
18559 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
18561 # p9-8: Prism-9 in P8 mode
18562 # ------------------------
18564 # P9 terminal in P8 emulation mode.
18565 # Similar to p8 definition.
18566 # Insertion and deletion operations possible.
18568 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
18569 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18570 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
18572 # p9-8-w: Prism-9 in P8 and 132 column modes
18573 # ------------------------------------------
18575 # P9 terminal in P8 emulation mode and 132 column mode.
18577 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
18578 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18579 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
18581 # p12: Prism-12 in ANSI mode
18582 # ---------------------------
18584 # See p9 definition.
18586 prism12|p12|P12|MDC Prism-12 in ANSI mode,
18589 # p12-w: Prism-12 in 132 column mode
18590 # ----------------------------------
18592 # 'Wide' version of p12.
18594 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
18597 # p12-m: Prism-12 in MDC emulation mode
18598 # -------------------------------------
18600 # P12 terminal in MDC emulation mode.
18601 # Similar to p8 definition.
18602 # Insertion and deletion operations possible.
18604 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
18607 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
18608 # -------------------------------------------------------
18610 # P12 terminal in MDC emulation mode and 132 column mode.
18612 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
18615 # p14: Prism-14 in ANSII mode
18616 # ---------------------------
18618 # See p9 definition.
18620 prism14|p14|P14|MDC Prism-14 in ANSII mode,
18623 # p14-w: Prism-14 in 132 column mode
18624 # ----------------------------------
18626 # 'Wide' version of p14.
18628 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
18631 # p14-m: Prism-14 in MDC emulation mode
18632 # -------------------------------------
18634 # P14 terminal in MDC emulation mode.
18635 # Similar to p8 definition.
18636 # Insertion and deletion operations possible.
18638 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
18641 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
18642 # -------------------------------------------------------
18644 # P14 terminal in MDC emulation mode and 132 column mode.
18646 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
18649 # End of McDonnell Information Systems Prism definitions
18651 # These things were popular in the Pick database community at one time
18652 # From: George Land <georgeland@aol.com> 24 Sep 1996
18653 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
18655 cols#80, lines#24, ma#1, wsl#78, xmc#1,
18656 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
18657 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
18658 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
18659 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
18660 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
18661 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
18662 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18663 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
18664 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
18665 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
18668 #### Microterm (act, mime)
18670 # The mime1 entries refer to the Microterm Mime I or Mime II.
18671 # The default mime is assumed to be in enhanced act iv mode.
18674 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
18675 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
18676 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
18677 # since Sytek insists ^S means xoff.
18678 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
18679 act4|microterm|microterm act iv,
18682 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
18683 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
18684 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
18685 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
18686 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
18688 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
18689 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
18690 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
18691 act5|microterm5|microterm act v,
18692 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
18694 # Mimes using brightness for standout. Half bright is really dim unless
18695 # you turn up the brightness so far that lines show up on the screen.
18696 mime-fb|full bright mime1,
18697 is2=^S\E, rmso=^S, smso=^Y, use=mime,
18698 mime-hb|half bright mime1,
18699 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
18700 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
18701 # the more plausible ":do=^J:" -- esr)
18702 # uc was at one time disabled to get around a curses bug, be wary of it
18703 mime|mime1|mime2|mimei|mimeii|microterm mime1,
18705 cols#80, it#8, lines#24, vt#9,
18706 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
18707 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
18708 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
18709 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
18710 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
18711 # These termcaps (for mime2a) put the terminal in low intensity mode
18712 # since high intensity mode is so obnoxious.
18713 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
18716 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
18717 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
18718 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
18719 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
18720 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
18721 smir=\EE, smso=\E:, smul=\E6,
18722 # This is the preferred mode (but ^X can't be used as a kill character)
18723 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
18725 cols#80, it#8, lines#24,
18726 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18727 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
18728 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
18729 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
18730 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
18731 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
18732 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
18733 mime3a|mime1 emulating 3a,
18735 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
18736 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
18738 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
18740 # Wed Mar 9 18:53:21 1983
18741 # We run our terminals at 2400 baud, so there might be some timing problems at
18742 # higher speeds. The major improvements in this model are the terminal now
18743 # scrolls down and insert mode works without redrawing the rest of the line
18744 # to the right of the cursor. This is done with a bit of a kludge using the
18745 # exit graphics mode to get out of insert, but it does not appear to hurt
18746 # anything when using vi at least. If you have some users using act4s with
18747 # programs that use curses and graphics mode this could be a problem.
18748 mime314|mm314|mime 314,
18751 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
18752 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
18753 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
18754 # Microterm mime 340 from University of Wisconsin
18755 mm340|mime340|mime 340,
18757 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
18758 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18759 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
18760 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
18761 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
18762 # This came from University of Wisconsin marked "astro termcap for jooss".
18763 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
18764 # also added <rmam>/<smam> based on the init string -- esr)
18765 mt4520-rv|micro-term 4520 reverse video,
18766 am, hs, msgr, xenl, xon,
18767 cols#80, it#8, lines#24, wsl#80,
18768 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
18769 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18770 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18771 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18772 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18773 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
18774 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
18775 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18776 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
18778 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18779 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
18780 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
18781 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
18782 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
18783 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
18784 tbc=\E[g, tsl=\E[25;1H,
18786 # Fri Aug 5 08:11:57 1983
18787 # This entry works for the ergo 4000 with the following setups:
18788 # ansi,wraparound,newline disabled, xon/xoff disabled in both
18791 # WARNING!!! There are multiple versions of ERGO 4000 microcode
18792 # Be advised that very early versions DO NOT WORK RIGHT !!
18793 # Microterm does have a ROM exchange program- use it or lose big
18794 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
18795 ergo4000|microterm ergo 4000,
18798 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
18799 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18800 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
18801 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
18802 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
18803 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
18804 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
18805 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
18806 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
18807 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
18812 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
18813 # For what happened to that group, see the ADDS section.
18815 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
18818 # The following vendor-supplied termcaps were captured from the Boundless
18819 # Technologies site, 8 March 1998. I removed all-upper-case names that were
18820 # identical, except for case, to lower-case ones. I also uncommented the acsc
18823 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18824 # DEC vt200/300 with color capabilities added.
18825 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
18826 colors#8, pairs#64,
18827 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18829 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18830 # DEC vt200/300 with color capabilities added.
18831 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
18832 colors#8, pairs#64,
18833 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18834 use=ncr260vt300wan,
18835 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18836 # DEC vt200/300 with color capabilities added.
18837 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
18838 colors#8, pairs#64,
18839 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18841 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18842 # DEC vt200/300 with color capabilities added.
18843 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
18844 colors#8, pairs#64,
18845 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18846 use=ncr260vt300wpp,
18847 # This definition for ViewPoint supports several attributes. This means
18848 # that it has magic cookies (extra spaces where the attributes begin).
18849 # Some applications do not function well with magic cookies. The System
18850 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18851 # If supporting various attributes is not vital, 'xmc#1' and the extra
18852 # attributes can be removed.
18853 # Mapping to ASCII character set ('acsc' capability) can also be
18854 # restored if needed.
18855 ncr260vppp|NCR 2900_260 viewpoint,
18856 am, bw, hs, km, mc5i, mir, msgr, xon,
18857 cols#80, lines#24, nlab#32, xmc#1,
18858 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
18859 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
18860 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
18861 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
18862 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
18863 el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
18864 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
18865 is2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18867 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
18868 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
18869 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B:\r,
18870 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
18871 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
18872 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
18873 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
18874 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
18875 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
18876 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
18877 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
18878 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
18879 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
18880 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18881 rs2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18883 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
18884 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
18885 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
18887 cup=\Ea%i%p1%dR%p2%dC$<30>,
18888 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18890 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18893 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
18894 am, hs, mir, msgr, xenl, xon,
18895 cols#80, lines#24, nlab#32,
18896 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18897 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
18898 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
18899 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
18900 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18901 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18902 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18903 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18904 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
18905 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
18906 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
18907 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
18909 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18911 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18912 khlp=\E[28~, kich1=\E[2~, krdo=\E[29~, nel=\EE$<5>, rc=\E8,
18913 rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
18914 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
18915 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18918 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18919 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18920 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
18921 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
18922 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+vtedit,
18923 use=vt220+cvis, use=vt220+keypad,
18924 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
18926 cup=\E[%i%p1%d;%p2%dH$<30>,
18927 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18929 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18932 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
18933 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18935 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18936 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18937 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
18938 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
18939 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18941 smkx=\E=, use=ncr260vt100an,
18942 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
18944 cup=\E[%i%p1%d;%p2%dH$<30>,
18945 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18947 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18950 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
18951 am, hs, mir, msgr, xenl, xon,
18952 cols#80, lines#24, nlab#32,
18953 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18954 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
18955 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
18956 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
18957 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18958 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18959 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18960 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18961 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
18962 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
18963 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
18964 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
18965 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18967 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18968 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
18969 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
18970 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
18971 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
18972 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
18973 kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~, kf31=\E[6~,
18974 kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf4=\EOS,
18975 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18976 khlp=\E[28~, krdo=\E[29~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
18977 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
18978 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18980 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18983 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18984 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18985 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
18986 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18987 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
18988 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
18989 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
18991 cup=\E[%i%p1%d;%p2%dH$<30>,
18992 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
18993 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
18994 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
18995 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18996 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18997 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18998 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
19000 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
19002 cup=\E[%i%p1%d;%p2%dH$<30>,
19003 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19005 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19008 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
19009 am, hs, mir, msgr, xenl, xon,
19010 cols#80, lines#24, nlab#32,
19011 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19012 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
19013 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
19014 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
19015 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19016 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19017 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19018 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
19019 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
19020 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
19021 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
19022 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
19023 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19025 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19026 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
19027 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
19028 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
19029 kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~,
19030 kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~,
19031 kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~,
19032 kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
19033 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, mc0=\E[i,
19034 mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>,
19035 rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
19036 rmso=\E[27m, rmul=\E[24m,
19037 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19040 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19041 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19042 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
19043 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19044 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
19045 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
19046 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
19048 cup=\E[%i%p1%d;%p2%dH$<30>,
19049 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19051 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19054 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
19055 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19056 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19057 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
19058 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
19060 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
19062 cup=\E[%i%p1%d;%p2%dH$<30>,
19063 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19065 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19068 # This terminfo file contains color capabilities for the Wyse325 emulation of
19069 # the NCR 2900/260C color terminal. Because of the structure of the command
19070 # (escape sequence) used to set color attributes, one of the fore/background
19071 # colors must be preset to a given value. I have set the background color to
19072 # black. The user can change this setup by altering the last section of the
19073 # 'setf' definition. The escape sequence to set color attributes is
19074 # ESC d y <foreground_color> <background_color> 1
19075 # In addition, the background color can be changed through the desk accessories.
19076 # The capability 'op' sets colors to green on black (default combination).
19078 # NOTE: The NCR Unix System Administrator's Shell will not function properly
19079 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
19080 # capability and recompile if you wish to have it included.
19082 ncr260wy325pp|NCR 2900_260 wyse 325,
19083 am, bw, hs, km, mc5i, mir, msgr, xon,
19084 colors#16, cols#80, lines#24, ncv#33, nlab#32,
19085 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19086 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
19087 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19088 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19089 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
19090 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
19091 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19092 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19094 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19095 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
19096 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
19097 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
19098 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
19099 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
19100 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
19101 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
19102 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19103 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
19104 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19105 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19106 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
19107 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19108 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19111 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19112 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19113 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
19114 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
19115 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
19116 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
19117 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
19118 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
19120 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
19122 cup=\Ea%i%p1%dR%p2%dC$<30>,
19123 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19125 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19128 # This definition for Wyse 350 supports several attributes. This means
19129 # that it has magic cookies (extra spaces where the attributes begin).
19130 # Some applications do not function well with magic cookies. The System
19131 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19132 # If supporting various attributes is not vital, 'xmc#1' and the extra
19133 # attributes can be removed.
19134 # Mapping to ASCII character set ('acsc' capability) can also be
19135 # restored if needed.
19136 # In addition, color capabilities have been added to this file. The drawback,
19137 # however, is that the background color has to be black. The foreground colors
19138 # are numbered 0 through 15.
19140 # NOTE: The NCR Unix System Administrator's Shell does not function properly
19141 # with the 'pairs' capability defined as below. If you wish to
19142 # have it included, Un-comment it and recompile (using 'tic').
19144 ncr260wy350pp|NCR 2900_260 wyse 350,
19145 am, bw, hs, km, mc5i, mir, msgr, xon,
19146 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
19147 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19148 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
19149 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19150 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
19151 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
19152 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
19153 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19154 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19156 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
19157 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
19158 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
19159 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19160 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
19161 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
19162 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
19163 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
19164 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
19165 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
19166 mc0=\EP$<10>, mc4=^T, mc5=^R,
19167 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
19168 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
19169 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19170 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19173 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19174 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19175 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
19176 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
19177 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
19178 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
19179 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
19180 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
19182 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
19184 cup=\Ea%i%p1%dR%p2%dC$<30>,
19185 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19187 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19190 # This definition for Wyse 50+ supports several attributes. This means
19191 # that it has magic cookies (extra spaces where the attributes begin).
19192 # Some applications do not function well with magic cookies. The System
19193 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19194 # If supporting various attributes is not vital, 'xmc#1' and the extra
19195 # attributes can be removed.
19196 # Mapping to ASCII character set ('acsc' capability) can also be
19197 # restored if needed.
19198 # (ncr260wy50+pp: originally contained commented-out
19199 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
19200 ncr260wy50+pp|NCR 2900_260 wyse 50+,
19201 am, bw, hs, km, mc5i, mir, msgr, xon,
19202 cols#80, lines#24, nlab#32, xmc#1,
19203 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
19204 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
19205 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19206 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
19207 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
19208 ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
19209 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
19211 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19212 \Ee4\Ex@\E`9\Ee7$<100>,
19213 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
19214 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
19215 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
19216 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19217 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
19218 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
19219 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
19220 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
19221 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
19222 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
19223 mc0=\EP$<10>, mc4=^T, mc5=^R,
19224 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19225 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19226 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19227 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19228 \Ee4\Ex@\E`9\Ee7$<100>,
19229 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
19230 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
19231 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
19233 cup=\Ea%i%p1%dR%p2%dC$<30>,
19234 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19235 \Ee4\Ex@\E`9\Ee7$<200>,
19236 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19237 \Ee4\Ex@\E`9\Ee7$<200>,
19239 ncr260wy60pp|NCR 2900_260 wyse 60,
19240 am, bw, hs, km, mc5i, mir, msgr, xon,
19241 cols#80, lines#24, nlab#32,
19242 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19243 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
19244 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19245 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19246 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
19247 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
19248 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
19250 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19251 \Ee4\Ex@\E`9\Ee7$<100>,
19252 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19253 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
19254 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19255 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
19256 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
19257 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
19258 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
19259 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
19260 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
19261 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19262 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19263 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
19264 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19265 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19266 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19267 \Ee4\Ex@\E`9\Ee7$<100>,
19268 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
19269 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
19271 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
19273 cup=\Ea%i%p1%dR%p2%dC$<30>,
19274 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19275 \Ee4\Ex@\E`9\Ee7$<100>,
19276 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19277 \Ee4\Ex@\E`9\Ee7$<100>,
19279 ncr160vppp|NCR 2900_160 viewpoint,
19281 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
19283 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
19285 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
19287 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
19288 use=ncr260vt100wan,
19289 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
19290 use=ncr260vt100wpp,
19291 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
19293 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
19295 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
19296 use=ncr260vt200wan,
19297 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
19298 use=ncr260vt200wpp,
19299 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
19301 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
19303 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
19304 use=ncr260vt300wan,
19305 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
19306 use=ncr260vt300wpp,
19307 ncr160wy50+pp|NCR 2900_160 wyse 50+,
19309 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
19310 use=ncr260wy50+wpp,
19311 ncr160wy60pp|NCR 2900_160 wyse 60,
19313 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
19315 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
19316 am, hs, mc5i, mir, msgr, xon,
19317 cols#80, it#8, lines#24, nlab#32,
19318 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
19319 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
19320 clear=\E[2J\E[1;1H$<300>, cr=\r,
19321 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
19322 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
19323 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
19324 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
19325 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
19326 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
19327 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
19328 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
19329 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
19331 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
19332 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
19333 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
19334 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
19335 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
19336 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
19337 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
19338 B\E)0\E%/0n\E[P\031$<200>,
19340 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
19341 %p3%|%t;7%;%?%p4%t;5%;m$<120>,
19342 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
19343 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
19345 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
19347 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
19348 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
19349 \E)0\E%/0n\E[P\031$<200>,
19352 # Vendor-supplied NCR termcaps end here
19354 # NCR7900 DIP switches:
19358 # 5 - Parity (Odd/Even)
19359 # 6 - Don't Send or Do Send Spaces
19360 # 7 - Parity Enable
19361 # 8 - Stop Bits (One/Two)
19364 # 1 - Upper/Lower Shift
19365 # 2 - Typewriter Shift
19366 # 3 - Half Duplex / Full Duplex
19367 # 4 - Light/Dark Background
19368 # 5-6 - Carriage Return Without / With Line Feed
19369 # 7 - Extended Mode
19370 # 8 - Suppress Keyboard Display
19373 # 1 - End of line entry disabled/enabled
19374 # 2 - Conversational mode / (Local?) Mode
19375 # 3 - Control characters displayed / not displayed
19376 # 4 - (2-wire?) / 4-wire communications
19377 # 5 - RTS on and off for each character
19378 # 6 - (50Hz?) / 60 Hz
19379 # 7 - Exit after level zero diagnostics
19380 # 8 - RS-232 interface
19383 # 1 - Reverse Channel (yes / no)
19384 # 2 - Manual answer (no / yes)
19385 # 3-4 - Cursor appearance
19386 # 5 - Communication Rate
19387 # 6 - Enable / Disable EXT turnoff
19388 # 7 - Enable / Disable CR turnoff
19389 # 8 - Enable / Disable backspace
19391 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
19392 # reverse, blink, dim, and underline) the appropriate number of bits (by
19393 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
19394 # '@' is (effectively) "or"ed with each attribute to generate the proper third
19395 # character in the <ESC>0 sequence. The <sgr> string implements the following
19398 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
19399 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
19401 # Where: P1 <==> Standout attribute parameter
19402 # P2 <==> Underline attribute parameter
19403 # P3 <==> Reverse attribute parameter
19404 # P4 <==> Blink attribute parameter
19405 # P5 <==> Dim attribute parameter
19406 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
19407 ncr7900i|ncr7900|n7900|ncr 7900 model 1,
19409 cols#80, lines#24, xmc#1,
19410 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
19411 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
19412 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
19413 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
19415 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19417 sgr0=\E0@, smso=\E0Q, smul=\E0`,
19418 ncr7900iv|ncr 7900 model 4,
19421 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
19422 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
19423 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
19424 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
19425 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
19426 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
19427 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
19428 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
19429 # The user can enter a CTRL-B to get out of this locked state.
19430 # In <hpa>, we want to output the character given by the formula:
19431 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
19432 ncr7901|ncr 7901 model,
19435 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
19436 cub1=^H, cud1=\n, cuf1=^F,
19437 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
19439 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
19440 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
19441 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
19442 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19444 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
19445 vpa=\013%p1%{64}%+%c,
19447 # Newbury Data Recording Limited (Newbury Data)
19449 # Have been manufacturing and reselling various peripherals for a long time
19450 # They don't make terminals anymore, but are still in business (in 2007).
19451 # Their e-mail address is at ndsales@newburydata.co.uk
19452 # and their post address is:
19454 # Newbury Data Recording Ltd,
19455 # Premier Park, Road One,
19456 # Winsford, Cheshire, CW7 3PT
19458 # Their technical support is still good, they sent me for free a printed copy
19459 # of the 9500 user manual and I got it just 1 week after I first contacted them
19463 # Manufactured in the early/mid eighties, behaves almost the same as a
19464 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
19465 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
19466 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
19467 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
19468 # recognized: if you type in "ESC !", the next (third) character is not
19469 # echoed, showing that the terminal was actually waiting for a parameter!
19470 ndr9500|nd9500|Newbury Data 9500,
19471 am, bw, hs, mc5i, mir, msgr, ul, xon,
19472 cols#80, lines#24, wsl#79,
19473 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
19474 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
19475 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19476 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
19477 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
19478 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
19479 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
19480 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
19481 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
19482 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
19483 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
19484 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
19485 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19486 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
19487 pfloc=\E|%{48}%p1%+%c2%p2%s\031,
19488 pfx=\E|%{48}%p1%+%c1%p2%s\031, prot=\E), ri=\Ej,
19489 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
19490 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
19491 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
19492 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
19494 ndr9500-nl|NDR 9500 with no status line,
19497 dsl@, fsl@, tsl@, use=ndr9500,
19499 ndr9500-25|NDR 9500 with 25th line enabled,
19500 lines#25, use=ndr9500,
19502 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
19503 lines#25, use=ndr9500-nl,
19505 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
19508 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
19509 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
19510 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
19511 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
19513 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
19514 lines#25, use=ndr9500-mc,
19516 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
19519 dsl@, fsl@, tsl@, use=ndr9500-mc,
19521 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
19522 lines#25, use=ndr9500-mc-nl,
19524 #### Perkin-Elmer (Owl)
19526 # These are official terminfo entries from within Perkin-Elmer.
19529 bantam|pe550|pe6100|perkin elmer 550,
19532 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19533 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19534 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
19535 fox|pe1100|perkin elmer 1100,
19538 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19539 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19540 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
19541 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
19542 owl|pe1200|perkin elmer 1200,
19545 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19546 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19547 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
19548 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
19549 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
19550 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
19551 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
19552 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
19553 pe1251|pe6300|pe6312|perkin elmer 1251,
19555 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
19556 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
19557 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19558 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
19559 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
19560 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
19561 # (pe7000m: this had
19562 # rmul=\E!\0, smul=\E!\040,
19563 # which is probably wrong, it collides with kf0
19564 pe7000m|perkin elmer 7000 series monochrome monitor,
19567 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
19568 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19569 ed=\EJ, el=\EI, home=\EH, ind=\n,
19570 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
19571 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
19572 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
19573 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
19575 pe7000c|perkin elmer 7000 series colour monitor,
19576 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
19577 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
19581 # Sperry Univac has merged with Burroughs to form Unisys.
19584 # This entry is for the Sperry UTS30 terminal running the TTY
19585 # utility under control of CP/M Plus 1R1. The functionality
19586 # provided is comparable to the DEC vt100.
19587 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
19588 uts30|sperry uts30 with cp/m@1R1,
19590 cols#80, lines#24, wsl#40,
19591 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19592 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
19593 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
19594 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19595 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19596 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
19597 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
19598 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
19599 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
19600 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
19601 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
19602 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
19603 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
19604 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
19605 smul=\E[4m, tsl=\E], uc=\EPB,
19609 # Tandem builds these things for use with its line of fault-tolerant
19610 # transaction-processing computers. They aren't generally available
19611 # on the merchant market, and so are fairly uncommon.
19614 tandem6510|adm3a repackaged by Tandem,
19617 # A funny series of terminal that TANDEM uses. The actual model numbers
19618 # have a fourth digit after 653 that designates minor variants. These are
19619 # natively block-mode and rather ugly, but they have a character mode which
19620 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
19621 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
19622 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
19623 tandem653|t653x|Tandem 653x multipage terminal,
19624 OTbs, am, da, db, hs,
19625 cols#80, lines#24, wsl#64, xmc#1,
19626 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
19627 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
19628 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
19629 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
19631 #### Tandy/Radio Shack
19633 # Tandy has a line of VDTs distinct from its microcomputers.
19636 dmterm|deskmate terminal,
19639 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
19640 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19641 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
19642 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
19643 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
19644 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
19645 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
19646 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
19648 dt100|dt-100|Tandy DT-100 terminal,
19650 cols#80, lines#24, xmc#1,
19651 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
19652 cr=\r, csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
19653 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19654 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19655 ich1=\E[@, il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B,
19656 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
19657 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
19658 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
19659 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
19660 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
19661 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19663 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
19664 cols#132, use=dt100,
19665 dt110|Tandy DT-110 emulating ansi,
19668 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
19669 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
19670 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19671 dch1=\E[0P, dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0,
19672 home=\E[H, ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n,
19673 is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19674 kcuu1=\E[A, kend=\E[K, kf1=\E[1~, kf10=\E[10~, kf2=\E[2~,
19675 kf3=\E[3~, kf4=\E[4~, kf5=\E[5~, kf6=\E[6~, kf7=\E[7~,
19676 kf8=\E[8~, kf9=\E[9~, khome=\E[G, kich1=\E[@, knp=\E[26~,
19677 kpp=\E[25~, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
19678 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m,
19679 rmul=\E[m, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19681 pt210|TRS-80 PT-210 printing terminal,
19684 bel=^G, cr=\r, cud1=\n, ind=\n,
19686 #### Tektronix (tek)
19688 # Tektronix tubes are graphics terminals. Most of them use modified
19689 # oscilloscope technology incorporating a long-persistence green phosphor,
19690 # and support vector graphics on a main screen with an attached "dialogue
19691 # area" for interactive text.
19694 tek|tek4012|tektronix 4012,
19697 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
19698 ff=\014$<1000>, is2=\E^O,
19699 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19700 tek4013|tektronix 4013,
19701 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
19702 tek4014|tektronix 4014,
19704 is2=\E\017\E9, use=tek4012,
19705 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19706 tek4015|tektronix 4015,
19707 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
19708 tek4014-sm|tektronix 4014 in small font,
19709 cols#121, lines#58,
19710 is2=\E\017\E:, use=tek4014,
19711 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19712 tek4015-sm|tektronix 4015 in small font,
19713 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
19714 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
19716 # You need to have "stty nl2" in effect. Some versions of tset(1) know
19717 # how to set it for you.
19719 # It's got the Magic Cookie problem around stand-out mode. If you can't
19720 # live with Magic Cookie, remove the :so: and :se: fields and do without
19721 # reverse video. If you like reverse video stand-out mode but don't want
19722 # it to flash, change the letter 'H' to 'P' in the :so: field.
19723 tek4023|tektronix 4023,
19725 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
19726 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
19727 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
19728 rmso=^_@, smso=^_P,
19729 # It is recommended that you run the 4025 at 4800 baud or less;
19730 # various bugs in the terminal appear at 9600. It wedges at the
19731 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
19732 # on keyboard don't work. You have to hit BREAK twice to get
19733 # one break at any speed - this is a documented feature.
19734 # Can't use cursor motion because it's memory relative, and
19735 # because it only works in the workspace, not the monitor.
19736 # Same for home. Likewise, standout only works in the workspace.
19738 # <el> was commented out since vi and rogue seem to work better
19739 # simulating it with lots of spaces!
19741 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
19742 # and didn't seem necessary.
19744 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
19746 cols#80, it#8, lines#34, lm#0,
19747 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
19748 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
19749 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
19750 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
19751 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
19752 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
19753 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
19755 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
19756 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
19758 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
19759 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
19760 tek4025-17|tek 4025 17 line window,
19761 lines#17, use=tek4025,
19762 tek4025-17-ws|tek 4025 17 line window in workspace,
19763 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
19764 \r\037wor\s17\r\037mon\s17\r,
19765 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
19766 smso=\037att e\r, use=tek4025-17,
19767 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
19768 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
19769 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
19771 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
19772 # The following status modes are assumed for normal operation (replace the
19773 # initial "!" by whatever the current command character is):
19774 # !COM 29 # NOTE: changes command character to GS (^])
19780 # ^]STO 9 17 25 33 41 49 57 65 73
19781 # Other modes may be set according to communication requirements.
19782 # If the command character is inadvertently changed, termcap can't restore it.
19783 # Insert-character cannot be made to work on both top and bottom rows.
19784 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
19785 # There also seems to be a problem with vertical motion, perhaps involving
19786 # delete/insert-line, following a typed carriage return. This terminal sucks.
19787 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19788 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
19789 # work any more. -- esr)
19790 tek4025a|Tektronix 4025A,
19791 OTbs, OTpt, am, bw, da, db, xon,
19792 cols#80, it#8, lines#34,
19793 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
19794 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
19795 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
19796 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
19797 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
19798 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
19799 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
19800 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
19801 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
19802 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
19803 \s33\s41\s49\s57\s65\s73\035wor\s0;,
19805 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
19806 # Here's the command file that I use to get rogue to work on the 4025.
19807 # It should work with any program using the old curses (e.g. it better
19808 # not try to scroll, or cursor addressing won't work. Also, you can't
19810 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
19811 tek4025-cr|tek 4025 for curses and rogue,
19813 cols#80, it#8, lines#33,
19814 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
19815 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
19816 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
19817 rmcup=\037wor 0, smcup=\037wor 33h,
19818 # next two lines commented out since curses only allows 128 chars, sigh.
19819 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
19820 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
19821 tek4025ex|4025ex|4027ex|tek 4025 w/!,
19822 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
19824 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
19825 tek4105|tektronix 4105,
19826 OTbs, am, mir, msgr, ul, xenl, xt,
19827 cols#79, it#8, lines#29,
19828 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
19829 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
19830 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
19831 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19832 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
19833 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
19834 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
19835 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
19836 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
19837 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
19838 smul=\E[=5;<2m, tbc=\E[1g,
19840 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
19841 tek4105-30|4015 emulating 30 line vt100,
19842 am, mir, msgr, xenl, xon,
19843 cols#80, it#8, lines#30, vt#3,
19844 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19845 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
19846 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19847 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19848 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
19849 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
19850 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
19851 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
19852 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
19853 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
19854 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
19855 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19856 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19857 %;m%?%p9%t\016%e\017%;$<2>,
19858 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
19859 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
19862 # Tektronix 4105 from BRL
19863 # The following setup modes are assumed for normal operation:
19864 # CODE ansi CRLF no DABUFFER 141
19865 # DAENABLE yes DALINES 30 DAMODE replace
19866 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
19867 # FLAGGING input INSERTREPLACE replace LFCR no
19868 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
19869 # SELECTCHARSET G1 0 TABS -2
19870 # Other setup modes may be set for operator convenience or communication
19871 # requirements; I recommend
19872 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
19873 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
19874 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
19875 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
19876 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
19877 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
19879 # and factory color maps. After setting these modes, save them with NVSAVE. No
19880 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19881 # "IC" cannot be used in combination with "im" & "ei".
19882 # "tek4105a" is just a guess:
19883 tek4105a|Tektronix 4105,
19884 OTbs, OTpt, msgr, xon,
19885 OTkn#8, cols#80, it#8, lines#30, vt#3,
19886 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
19887 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
19888 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19889 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19890 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19891 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
19892 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19893 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19894 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
19895 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
19896 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
19897 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
19898 ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19899 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
19900 rmso=\E[m, rmul=\E[m,
19901 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
19902 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
19903 \E[?7;8h\E[r\E[m\E>,
19904 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
19905 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19909 # Tektronix 4106/4107/4109 from BRL
19910 # The following setup modes are assumed for normal operation:
19911 # CODE ansi COLUMNMODE 80 CRLF no
19912 # DABUFFER 141 DAENABLE yes DALINES 32
19913 # DAMODE replace DAVISIBILITY yes ECHO no
19914 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
19915 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
19916 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
19918 # Other setup modes may be set for operator convenience or communication
19919 # requirements; I recommend
19920 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
19921 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
19922 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
19923 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
19924 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
19925 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
19927 # and factory color maps. After setting these modes, save them with NVSAVE. No
19928 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19929 # "IC" cannot be used in combination with "im" & "ei".
19930 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
19932 cols#80, it#8, lines#32, vt#3,
19933 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
19934 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
19935 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19936 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19937 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19938 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
19939 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19940 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19941 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
19942 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
19943 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
19944 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
19945 ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19946 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
19947 rmso=\E[m, rmul=\E[m,
19948 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
19949 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
19950 ;5l\E[?7;8h\E[r\E[m\E>,
19951 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
19952 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
19956 # TEK Programmer's Reference
19957 # Part No. 070-4893-00
19959 # 4107/4109 Computer Display Terminal
19962 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
19963 # 0 selects Tek mode, i.e., \E%!0
19964 # 1 selects ANSI mode
19965 # 2 selects ANSI edit-mode
19966 # 3 selects VT52 mode
19968 # One odd thing about the description (which has been unchanged since the 90s)
19969 # is that the cursor addressing is using VT52 mode, and a few others use the
19970 # VT52's non-CSI versions of ANSI, e.g., \EJ. A possible explanation is that
19971 # the developer used Emacs, which misuses cvvis (this description sets VT52
19972 # mode in that capability).
19973 tek4107|tek4109|tektronix terminals 4107 4109,
19974 OTbs, am, mir, msgr, ul, xenl, xt,
19975 cols#79, it#8, lines#29,
19976 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
19977 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
19978 cub1=^H, cud1=\n, cuf1=\EC,
19979 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
19980 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
19981 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19982 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
19983 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
19984 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
19985 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
19986 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
19987 smul=\E%!1\E[4m$<2>\E%!0,
19988 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
19989 # see the note attached to tek4207.
19990 tek4207-s|Tektronix 4207 with sysline but no memory,
19992 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
19993 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
19994 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
19995 is2=\E7\E[?6l\E[2K\E[?6h\E8,
19996 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
19998 # The 4110 series may be a wonderful graphics series, but they make the 4025
19999 # look good for screen editing. In the dialog area, you can't move the cursor
20000 # off the bottom line. Out of the dialog area, ^K moves it up, but there
20001 # is no way to scroll.
20003 # Note that there is a floppy for free from Tek that makes the
20004 # 4112 emulate the vt52 (use the vt52 termcap). There is also
20005 # an expected enhancement that will use ANSI standard sequences.
20007 # 4112 in non-dialog area pretending to scroll. It really wraps
20008 # but vi is said to work (more or less) in this mode.
20010 # 'vi' works reasonably well with this entry.
20012 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
20015 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
20016 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
20017 # The 4112 with the ANSI compatibility enhancement
20018 tek4112|tek4114|tektronix 4110 series,
20021 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
20022 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
20023 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
20024 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
20025 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
20026 tek4112-nd|4112 not in dialog area,
20028 cuu1=^K, use=tek4112,
20029 tek4112-5|4112 in 5 line dialog area,
20030 lines#5, use=tek4112,
20031 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
20032 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
20033 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
20034 # previously \0410 and \0411 sequences...I don't *think* they were supposed
20035 # to be 4-digit octal -- esr)
20036 tek4113|tektronix 4113 color graphics with 5 line dialog area,
20039 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
20040 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20042 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
20043 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
20045 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
20046 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
20047 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
20048 # :vb: needs enough delay to let you see the background color being toggled.
20049 tek4113-nd|tektronix 4113 color graphics with no dialog area,
20051 cols#80, it#8, lines#34,
20052 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
20054 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20056 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
20057 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
20058 # This entry is from Tek. Inc. (Brian Biehl)
20059 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
20060 otek4115|Tektronix 4115,
20061 OTbs, am, da, db, eo,
20062 cols#80, it#8, lines#34,
20063 cbt=\E[Z, clear=\E[H\E[2J,
20064 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
20065 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20066 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
20067 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
20069 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
20070 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
20071 kbs=^H, ri=\EM, rmam=\E[?7l,
20072 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
20073 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
20074 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
20076 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
20079 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
20080 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20081 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20082 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
20083 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
20084 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
20085 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
20086 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rev=\E[7m,
20087 rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
20088 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
20090 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20091 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
20092 # The tek4125 emulates a vt100 incorrectly - the scrolling region
20093 # command is ignored. The following entry replaces <csr> with the needed
20094 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
20095 # chokes on; and adds a lot of initialization for the tek dialog area.
20096 # Note that this entry uses all 34 lines and sets the cursor color to green.
20097 # Steve Jacobson 8/85
20098 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
20099 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
20100 tek4125|tektronix 4125,
20102 csr@, dl1=\E[1M, il1=\E[1L,
20103 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
20104 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
20106 rc@, sc@, smkx=\E=, use=vt100+4bsd,
20108 # From: <jcoker@ucbic>
20109 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
20110 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
20111 # note that if jcoker wasn't confused you may be able to use this one.
20112 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
20113 tek4207|Tektronix 4207 graphics terminal with memory,
20114 am, bw, mir, msgr, ul, xenl,
20115 cols#80, it#8, lines#32,
20116 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
20117 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20118 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
20119 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
20120 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
20121 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
20122 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
20123 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
20124 rev=\E[7m, ri=\E[T,
20125 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
20126 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
20127 smul=\E[4m, tbc=\E[1g,
20129 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
20130 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
20131 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
20132 tek4404|tektronix 4404,
20134 cols#80, it#8, lines#32,
20135 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
20136 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
20137 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
20138 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
20139 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
20140 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
20141 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20142 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
20143 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
20144 # Some unknown person wrote:
20145 # I added the is string - straight Unix has ESC ; in the login
20146 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
20147 # mode). The is string here cleans up a few things (but not
20149 ct8500|tektronix ct8500,
20152 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
20153 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
20154 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
20155 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
20156 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
20158 # Tektronix 4205 terminal.
20160 # am is not defined because the wrap around occurs not when the char.
20161 # is placed in the 80'th column, but when we are attempting to type
20162 # the 81'st character on the line. (esr: hmm, this is like the vt100
20163 # version of xenl, perhaps am + xenl would work!)
20165 # Bold, dim, and standout are simulated by colors and thus not allowed
20166 # with colors. The tektronix color table is mapped into the RGB color
20167 # table by setf/setb. All colors are reset to factory specifications by oc.
20168 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
20169 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
20170 # interval then maps into pre-defined value.
20171 tek4205|tektronix 4205,
20173 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
20174 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20175 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
20176 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
20177 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20178 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20179 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
20180 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
20181 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
20183 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
20184 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
20185 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
20186 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
20187 1%e%p2%{875}%<%tE:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
20188 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
20189 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE:%eF4%;%?%p4%{125}%<
20190 %t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8
20191 %e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE:%eF
20193 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
20194 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
20195 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
20197 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
20199 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
20200 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
20201 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20202 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20204 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20205 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20207 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
20208 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
20209 smul=\E[4m, tbc=\E[1g,
20211 #### Teletype (tty)
20213 # These are the hardcopy Teletypes from before AT&T bought the company,
20214 # clattering electromechanical dinosaurs in Bakelite cases that printed on
20215 # pulpy yellow roll paper. If you remember these you go back a ways.
20216 # Teletype-branded VDTs are listed in the AT&T section.
20218 # The earliest UNIXes were designed to use these clunkers; nroff and a few
20219 # other programs still default to emitting codes for the Model 37.
20222 tty33|tty35|model 33 or 35 teletype,
20225 bel=^G, cr=\r, cud1=\n, ind=\n,
20226 tty37|model 37 teletype,
20228 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
20231 # There are known to be at least three flavors of the tty40, all seem more
20232 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
20233 # awful braindamage, such as printing a visible newline indicator after each
20234 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
20235 # braindamaged but has hope and is described here. The 40-4 is a 3270
20236 # lookalike and beyond hope. The terminal has visible bell but I don't know
20237 # it - it's null here to prevent it from showing the BL character.
20238 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
20239 # a "newline" style terminal (-crmode) vi figures all it needs is nl
20240 # to get crlf, even if <cr> is not ^M.)
20241 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
20242 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
20245 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
20246 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
20247 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
20248 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
20249 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
20250 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
20251 tty43|model 43 teletype,
20252 OTbs, am, hc, os, xon,
20254 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
20259 # You can add <is2=\E<> to put this 40-column mode, though I can't
20260 # for the life of me think why anyone would want to.
20261 scanset|sc410|sc415|Tymshare Scan Set,
20264 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
20265 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20266 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
20267 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
20268 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
20270 #### Volker-Craig (vc)
20272 # If you saw a Byte Magazine cover with a terminal on it during the early
20273 # 1980s, it was probably one of these. Carl Helmers liked them because
20274 # they could crank 19.2 and were cheap (that is, he liked them until he tried
20275 # to program one...)
20278 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
20279 # every other linefeed.
20280 vc303|vc103|vc203|volker-craig 303,
20283 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20284 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
20285 kcuu1=^N, ll=\017$<1>W,
20286 vc303a|vc403a|volker-craig 303a,
20287 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
20288 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
20289 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
20290 vc404|volker-craig 404,
20293 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20294 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
20295 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
20296 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
20297 vc404-s|volker-craig 404 w/standout mode,
20298 cud1=\n, rmso=^O, smso=^N, use=vc404,
20299 # From: <wolfgang@cs.sfu.ca>
20300 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
20301 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
20304 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
20305 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
20306 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
20307 ich1=\E:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
20308 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
20309 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
20310 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
20311 rmso=\E^_, smso=\E^Y,
20312 vc415|volker-craig 415,
20313 clear=^L, use=vc404,
20315 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
20318 #### IBM PC and clones
20321 # The pcplot IBM-PC terminal emulation program is really messed up. It is
20322 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
20323 # doesn't support scrolling regions, ignores add line commands, and ignores
20324 # delete line commands. Consequently, the resulting behavior looks like a
20325 # crude adm3a-type terminal.
20326 # Steve Jacobson 8/85
20327 pcplot|pc-plot terminal emulation program,
20329 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
20330 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
20331 # I've found that my KayPro II, running MDM730, continues to emulate an
20332 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
20333 # system the following termcap entry works well:
20334 # I have noticed a couple of minor glitches, but nothing I can't work
20335 # around. (I added two capabilities from the BRL entry -- esr)
20336 kaypro|kaypro2|kaypro II,
20339 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
20340 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
20341 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
20343 # From IBM, Thu May 5 19:35:27 1983
20344 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
20345 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
20348 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
20349 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
20351 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
20352 OTbs, am, bw, eo, hs, km, msgr, ul,
20353 cols#80, it#8, lines#24,
20354 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
20356 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
20357 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
20358 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20359 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
20360 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
20361 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
20362 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20363 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
20364 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
20365 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
20366 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
20367 rmso=\E[m, rmul=\E[m,
20368 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20370 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
20374 # Apple II firmware console first, then various 80-column cards and
20375 # terminal emulators. For two cents I'd toss all these in the UFO file
20376 # along with the 40-column apple entries.
20379 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
20380 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
20381 # function of TIC, not the firmware.
20382 # The clear key on a IIgs will do something like clear-screen,
20383 # depending on what you're in.
20384 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
20385 OTbs, am, bw, eo, msgr,
20386 cols#80, it#8, lines#24,
20387 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
20388 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20389 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
20390 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
20392 # Apple //e with 80-column card, entry from BRL
20393 # The modem interface is permitted to discard LF (maybe DC1), otherwise
20394 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
20395 # Auto-wrap does not work right due to newline scrolling delay, which also
20396 # requires that you set "stty cr2".
20397 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
20398 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
20399 # using a terminal emulation program instead of the built-in firmware.
20403 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
20404 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
20405 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
20406 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20408 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
20409 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
20410 apple2e-p|Apple //e via Pascal,
20411 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
20412 kcud1=\n, use=apple2e,
20413 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
20414 # Enable DC3/DC1 flow control with "stty ixon -ixany".
20415 apple-ae|ASCII Express,
20416 OTbs, am, bw, msgr, nxon, xon,
20417 cols#80, it#8, lines#24,
20418 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20419 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20420 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
20421 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20423 appleII|apple ii plus,
20425 cols#80, it#8, lines#24,
20426 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
20427 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
20428 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
20429 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
20430 # Originally by Gary Ford 21NOV83
20431 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
20432 apple-80|apple II with smarterm 80 col,
20435 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
20436 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
20437 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
20438 apple-soroc|apple emulating soroc 120,
20441 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20442 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
20443 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
20444 # From Peter Harrison, Computer Graphics Lab, San Francisco
20445 # ucbvax!ucsfmis!harrison .....uucp
20446 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
20447 # "These two work. If you don't have the inverse video chip for the
20448 # Apple with videx then remove the :so: and :se: fields."
20449 # (apple-videx: this used to be called DaleApple -- esr)
20450 apple-videx|Apple with videx videoterm 80 column board with inverse video,
20452 cols#80, it#8, lines#24,
20453 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
20454 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20455 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
20456 rmso=^Z2, sgr0=^Z2, smso=^Z3,
20457 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
20458 # Apple Cat ][ 212 modem, + more all
20459 # controlled by ASCII Express: Pro.
20460 # From Dave Shaver <isucs1!shaver>
20461 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
20464 acsc=, clear=^L, cuf1=^\,
20465 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20466 flash=^W35^W06, home=^Y,
20467 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
20469 apple-uterm|Ultraterm for Apple micros,
20472 acsc=, clear=^L, cuf1=^\,
20473 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20474 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
20475 # from trwrba!bwong (Bradley W. Wong):
20477 # This entry assumes that you are using an apple with the UCSD Pascal
20478 # language card. SYSTEM.MISCINFO is assumed to be the same as that
20479 # supplied with the standard apple except that screenwidth should be set
20480 # using SETUP to 80 columns. Note that the right arrow is not mapped in
20481 # this termcap entry. This is because that key, on the Apple, transmits
20482 # a ^U and would thus preempt the more useful "up" function of vi.
20485 apple80p|80-column apple with Pascal card,
20488 clear=^Y^L, cuf1=^\:, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
20489 cuu1=^_, ed=^K, el=^], home=^Y, kcub1=^H,
20491 # Apple II+ equipped with Videx 80 column card
20493 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
20494 # manually converted by D A Gwyn
20496 # DO NOT use any terminal emulation with this data base, it works directly
20497 # with the Videx card. This has been tested with vi 1200 baud and works fine.
20499 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
20500 # 1 screen, while in R2 ^U doesn't.
20501 # For inverse alternate character set add:
20502 # <smacs>=^O:<rmacs>=^N:
20503 # (apple-v: added it#8 -- esr)
20504 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
20506 cols#80, it#8, lines#24,
20507 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
20508 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
20509 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
20510 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
20511 khome=^Y, rmso=^Z2, smso=^Z3,
20512 apple-videx3|vapple|Apple II with 80 col card,
20515 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
20516 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
20517 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20518 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
20519 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
20520 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
20521 aepro|Apple II+ running ASCII Express Pro--vt52,
20524 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
20525 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20527 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
20528 apple-vm80|ap-vm80|apple with viewmax-80,
20531 clear=\014$<300/>, cuf1=^\:,
20532 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
20533 ed=\013$<300/>, el=^], home=\031$<200/>,
20535 #### Apple Lisa & Macintosh
20538 # (lisa: changed <cvvis> to <cnorm> -- esr)
20539 lisa|apple lisa console display (black on white),
20540 OTbs, am, eo, msgr,
20541 cols#88, it#8, lines#32,
20542 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
20543 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
20544 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20545 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
20546 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20547 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
20548 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
20549 liswb|apple lisa console display (white on black),
20550 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
20551 smso=\E[m, smul=\E[4m, use=lisa,
20553 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
20554 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
20556 # These entries assume that the 'Auto Wraparound' is enabled.
20557 # Xon-Xoff flow control should also be enabled.
20559 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
20560 # settings are in non-volatile memory and don't need to be reset upon login.
20561 # Also setting the number of columns glitches the screen annoyingly.
20562 # You can type "reset" to get them set.
20564 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
20565 OTbs, OTpt, am, xenl, xon,
20566 OTkn#4, cols#80, it#8, lines#24, vt#3,
20567 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
20568 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20569 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
20570 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
20571 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
20572 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
20573 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
20574 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20575 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
20576 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
20578 # Lisaterm in 132 column ("wide") mode.
20579 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
20581 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
20582 # Although MacTerminal has insert/delete line, it is commented out here
20583 # since it is much faster and cleaner to use the "lock scrolling region"
20584 # method of inserting and deleting lines due to the MacTerminal implementation.
20585 # Also, the "Insert/delete ch" strings have an extra character appended to them
20586 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
20587 # supported by MacTerminal.
20588 mac|macintosh|Macintosh with MacTerminal,
20591 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
20592 # Lisaterm in 132 column ("wide") mode.
20593 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
20596 #### Radio Shack/Tandy
20599 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
20600 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
20601 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
20602 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
20604 cols#80, it#8, lines#24,
20605 bel=^G, blink=^_", bold=\E:^A, civis=^E\s,
20606 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
20607 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
20608 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
20609 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
20610 sgr0=\037!\E:\0, smso=^_\s, smul=^_",
20611 # (trs2: removed obsolete ":nl=^_:" -- esr)
20612 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
20614 cols#80, it#8, lines#24,
20615 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
20616 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
20617 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
20618 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
20619 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
20620 # (This had extension capabilities
20621 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
20622 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
20623 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
20624 trs16|trs-80 model 16 console,
20626 cols#80, it#8, lines#24,
20627 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
20628 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20629 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20630 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
20631 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20632 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
20633 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
20634 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
20635 smacs=\ERG, smso=\ERD,
20637 #### Commodore Business Machines
20639 # Formerly located in West Chester, PA; went spectacularly bust in 1994
20640 # after years of shaky engineering and egregious mismanagement. Made one
20641 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
20642 # C-128, VIC-20). The C-64 is said to have been the most popular machine
20643 # ever (most units sold); they can still be found gathering dust in closets
20647 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
20648 # Added a few more entries, converted caret-type control sequence (^x) entries
20649 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
20650 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
20652 # :as:, :ae: Support for alternate character sets.
20653 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
20654 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
20655 # This one appears to fix a problem I always had with a line ending
20656 # at 'width+1' (I think) followed by a blank line in vi. The blank
20657 # line tended to disappear and reappear depending on how the screen
20658 # was refreshed. Note that this is probably needed only if you use
20659 # something like a Dnet Fterm with the window sized to some peculiar
20660 # dimension larger than 80 columns.
20661 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
20662 # (amiga: removed obsolete :kn#10:,
20663 # also added empty <acsc> to suppress a warning --esr)
20665 OTbs, am, bw, xenl,
20667 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
20668 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
20669 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20670 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20671 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
20672 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
20673 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
20674 invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20675 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
20676 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
20677 kf8=\E[7~, kf9=\E[8~, rev=\E[7m, ri=\E[T, rmacs=^O,
20678 rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N,
20679 smso=\E[7m, smul=\E[4m, use=ecma+index,
20681 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
20682 # (amiga: added empty <acsc> to suppress a warning.
20683 # I'm told this entry screws up badly with AS225, the Amiga
20684 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
20685 amiga-h|Hans Verkuil's Amiga ANSI,
20688 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
20689 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
20690 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
20691 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
20692 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
20693 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
20694 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
20695 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
20696 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20697 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
20698 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
20699 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
20700 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
20701 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
20702 smso=\2337m, smul=\2334m,
20704 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
20706 # Pavel Fedin added
20711 amiga-8bit|Amiga ANSI using 8-bit controls,
20712 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
20713 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
20714 kpp=\233T, ri=\215, rin@, use=amiga-h,
20716 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
20717 # requires use of appropriate preferences settings.
20718 amiga-vnc|Amiga using VNC console (black on light gray),
20719 am, da, db, msgr, ndscr,
20720 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
20721 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
20722 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
20723 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20724 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20725 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20726 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
20727 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
20728 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
20730 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
20731 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20732 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
20733 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
20734 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
20735 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
20736 rev=\E[7m, ri=\EM, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l,
20737 rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
20738 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
20739 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
20740 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
20741 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
20742 smso=\E[1m, smul=\E[4m, use=ecma+index,
20744 # MorphOS on Genesi Pegasos
20745 # By Pavel Fedin <sonic_amiga@rambler.ru>
20746 morphos|MorphOS on Genesi Pegasos,
20747 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
20748 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
20749 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
20750 ri=\215, rin@, use=amiga-h,
20752 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
20753 # I'm trying to write a termcap for a commodore b-128, and I'm
20754 # having a little trouble. I've had to map most of my control characters
20755 # to something that unix will accept (my delete-char is a ctrl-t, etc),
20756 # and create some functions (like cm), but thats life.
20757 # The problem is with the arrow keys - right, and up work fine, but
20758 # left deletes the previous character and down I just can't figure out.
20759 # Jove knows what I want, but I don't know what it's sending to me (it
20760 # isn't thats bound to next-line in jove).
20761 # Anybody got any ideas? Here's my termcap.
20762 # DAG -- I changed his "^n" entries to "\n"; see if that works.
20764 commodore|b-128|Commodore B-128 micro,
20766 OTdN#20, cols#80, lines#24, pb#150,
20767 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
20768 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
20769 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
20770 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
20771 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
20776 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
20777 northstar|North Star Advantage,
20781 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
20782 el=\016$<200/>, home=\034\032$<200/>,
20786 # Thu Jul 7 03:55:16 1983
20788 # As an aside, be careful; it may sound like an anomaly on the
20789 # Osborne, but with the 80-column upgrade, it's too easy to
20790 # enter lines >80 columns!
20792 # I've already had several comments...
20793 # The Osborne-1 with the 80-col option is capable of being
20794 # 52, 80, or 104 characters wide; default to 80 for compatibility
20795 # with most systems.
20797 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
20798 osborne-w|osborne1-w|osborne I in 104-column mode,
20800 cols#104, lines#24,
20801 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20802 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20803 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
20804 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
20805 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
20806 osborne|osborne1|osborne I in 80-column mode,
20807 OTbs, am, mir, msgr, ul, xhp,
20808 OTdB#4, cols#80, lines#24,
20809 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
20810 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
20811 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
20812 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
20813 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
20815 # Osborne Executive definition from BRL
20816 # Similar to tvi920
20817 # Added by David Milligan and Tom Smith (SMU)
20818 osexec|Osborne executive,
20820 OTug#1, cols#80, lines#24, xmc#1,
20821 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20822 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20823 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
20824 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
20825 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
20826 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
20827 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
20830 #### Console types for obsolete UNIX clones
20832 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
20833 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
20834 # were commercial, Minix an educational tool sold in conjunction with a book.
20835 # Memory-segmentation limits and a strong tendency to look like V7 long after
20836 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
20837 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
20838 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
20839 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
20840 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
20841 # even as single processes under SunOS and the Macintosh OS.
20845 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
20846 minix|minix console (v3),
20847 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
20848 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
20849 \301w\302x\263y\363z\362{\343|\330}\234~\376,
20850 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
20851 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
20852 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
20853 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
20854 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
20855 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
20856 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
20857 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
20858 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
20859 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
20860 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
20861 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
20862 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
20865 minix-3.0|minix console (v3.0),
20866 use=ecma+color, use=minix-1.7,
20869 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
20870 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
20871 minix-1.7|minix console (v1.7),
20873 cols#80, it#8, lines#25,
20874 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
20875 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
20876 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20877 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20878 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
20879 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
20880 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20881 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
20882 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
20883 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
20884 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
20885 smso=\E[7m, smul=\E[4m,
20886 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
20887 minix-old|minix-1.5|minix console (v1.5),
20889 cols#80, it#8, lines#25,
20890 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
20891 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
20892 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20893 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20894 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
20895 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
20896 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20897 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
20898 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
20899 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
20900 # The linewrap option can be specified by editing /usr/include/minix/config.h
20901 # before recompiling the minix 1.5 kernel.
20902 minix-old-am|minix console with linewrap,
20905 pc-minix|minix console on an Intel box,
20906 use=klone+acs, use=minix-3.0,
20908 # According to the Coherent 2.3 manual, the PC console is similar
20909 # to a z19. The differences seem to be (1) 25 lines, (2) no status
20910 # line, (3) standout is broken, (4) ins/del line is broken, (5)
20911 # has blinking and bold.
20912 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
20914 cols#80, it#8, lines#25,
20915 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20916 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
20917 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
20918 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
20919 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
20921 # According to the Venix 1.1 manual, the PC console is similar
20922 # to a DEC vt52. Differences seem to be (1) arrow keys send
20923 # different strings, (2) enhanced standout, (3) added insert/delete line.
20924 # Note in particular that it doesn't have automatic margins.
20925 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
20926 # not described here because this derives from an old termcap entry.
20927 pc-venix|venix|IBM PC console running Venix,
20928 cols#80, it#8, lines#25,
20929 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20930 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
20931 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
20932 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
20934 #### Miscellaneous microcomputer consoles
20936 # If you know anything more about any of these, please tell me.
20939 # The MAI Basic Four computer was obsolete at the end of the 1980s.
20940 # It may be used as a terminal by putting it in "line" mode as seen on
20941 # one of the status lines.
20942 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
20943 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
20944 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
20945 # used \ED instead.
20946 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
20947 mai|basic4|MAI Basic Four in ansi mode,
20948 am, da, db, mir, msgr,
20949 cols#82, it#8, lines#25,
20950 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
20951 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
20952 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
20953 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
20954 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
20955 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
20956 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
20957 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
20958 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
20959 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20960 smir=\E[4h, smso=\E[7m, smul=\E[4m,
20961 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
20962 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
20964 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
20965 # The Basis 108 was a Apple II clone, manufactured by the "Basis
20966 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
20967 # about 1,5 km from where I live, but doesn't build own computers any
20968 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
20969 # equipped with one or two 5.25" disk drives, had a monochrome and colour
20970 # video output for a TV set or a dedicated monitor and several slots for
20971 # Apple II cards. Basis 108 were quite popular at german schools before
20972 # the advent of the IBM PC. They run, for example, the UCSD Pascal
20973 # development system (which I used even in 1993 to program the steering
20974 # and data recording for our school's experimental solar panel :), Apple DOS
20976 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
20977 basis|BASIS108 computer with terminal translation table active,
20978 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
20979 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
20980 smso=\E(, use=adm3a,
20981 # luna's BMC terminal emulator
20982 luna|luna68k|LUNA68K Bitmap console,
20983 cols#88, lines#46, use=ansi-mini,
20984 megatek|pegasus workstation terminal emulator,
20987 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
20988 # interface (pre-Macintosh by several years) that went nowhere.
20989 xerox820|x820|Xerox 820,
20992 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20993 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
20996 #### Videotex and teletext
20999 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
21000 # \E[?3l 80 columns
21001 # \E[?4l scrolling on
21002 # \E[12h local echo off
21003 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
21004 # \E)0 G1 DEC set (line graphics)
21006 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
21007 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
21008 OTbs, eslok, hs, xenl,
21009 cols#80, it#8, lines#24, wsl#72, xmc#0,
21010 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
21011 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
21012 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
21013 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
21014 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21015 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21016 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
21017 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
21018 is1=\E:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
21019 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
21020 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
21021 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21022 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
21023 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
21024 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
21025 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
21026 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
21027 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
21028 u6=\E[%i%d;%dR, u7=\E[6n,
21030 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
21032 minitel1|minitel 1,
21033 am, bw, eslok, hs, hz, .msgr, G0,
21034 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
21035 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
21036 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21037 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
21038 dsl=\037@A\030\n, el=^X,
21039 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
21040 home=^^, ind=\n, is2=\E;`ZQ\E:iC\E:iE\021, kbs=^SG,
21041 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
21042 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
21043 rev=\E], ri=^K, rmso=\E\\,
21044 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21045 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21046 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
21048 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
21049 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
21050 %tC%e%p1%'@'%+%c%;,
21051 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
21052 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
21053 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
21054 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
21055 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
21056 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
21058 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
21059 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
21060 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
21061 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
21062 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
21063 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
21064 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
21065 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
21066 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
21067 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
21068 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
21069 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
21070 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
21072 minitel1b|minitel 1-bistandard (in 40cols mode),
21074 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
21075 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
21076 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
21077 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
21078 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
21079 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
21080 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
21081 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
21082 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
21083 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
21084 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
21085 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
21086 rmir=\E[4l, smir=\E[4h,
21087 u8=\001%[ABCPtuvwxyz0123456789:;<=>?]\004,
21088 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
21089 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E:|k, .rmkx=\E;jYA,
21090 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
21092 # rmkx posait des problemes (logout en sortant de vi).
21093 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
21094 am@, bw@, eslok@, hz@, msgr, G0,
21095 colors@, cols#80, it#8, pairs@,
21096 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
21097 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
21098 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21099 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
21100 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
21101 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
21102 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
21103 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21104 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
21105 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
21106 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
21108 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
21109 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
21110 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
21111 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
21113 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
21114 smso=\E[7m, smul=\E[4m,
21115 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
21116 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
21117 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
21118 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
21120 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
21121 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
21122 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
21124 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
21126 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
21127 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
21128 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
21129 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
21130 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
21131 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
21132 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
21133 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
21134 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
21135 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
21138 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
21140 bold=\EG, clear=^L\EB,
21141 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
21142 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
21143 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21144 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
21147 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
21150 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
21151 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
21152 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
21153 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
21154 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
21156 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21157 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
21158 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
21159 .u8=\001Cu|\004r, use=minitel1b,
21163 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
21165 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
21166 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
21167 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
21169 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
21170 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
21171 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
21172 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
21174 # Fonctionne par exemple avec Midnight Commander (mc).
21176 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
21178 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
21179 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
21180 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
21182 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21183 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
21184 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
21185 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
21186 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
21187 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
21188 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
21189 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
21190 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
21191 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
21192 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
21193 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
21194 \,+k\,.l\,0\177\,-j,
21197 minitel12-80|minitel 12 (80cols),
21199 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
21201 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
21203 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
21205 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
21206 E0=^O, S0=\E)3\016,
21207 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21208 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
21209 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
21210 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
21211 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
21212 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
21213 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
21214 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
21215 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
21216 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
21217 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
21218 \,\\\,m\,+k\,.l\,0\177\,-j,
21222 # Add these in your ~/.screenrc for inputting some special glyphs like french
21223 # accentuated chars in 40 cols mode:
21225 # bindkey ^YA digraph '`' # Saisi accent grave.
21226 # bindkey ^YB digraph "'" # Saisi accent aigu.
21227 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
21228 # bindkey ^YH digraph '"' # Saisi accent trema.
21230 # bindkey ^Y# stuff \243 # Livre.
21231 # bindkey "^Y\047" stuff \247 # Paragraphe.
21232 # bindkey ^Yj stuff \306 # AE
21233 # bindkey ^Yz stuff \346 # ae
21234 # bindkey ^YKc stuff \347 # c cedille.
21237 screen.minitel1|Screen specific for minitel1,
21239 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
21241 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
21242 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
21243 use=xterm+x11mouse, use=screen4,
21245 screen.minitel1b|Screen specific for minitel1b,
21246 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
21247 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
21248 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
21249 use=screen.minitel1,
21251 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
21252 colors@, ncv@, pairs@,
21253 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
21254 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
21255 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
21256 use=screen.minitel1b,
21258 screen.minitel1-nb|Screen specific for minitel1-nb,
21259 colors@, ncv@, pairs@,
21260 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
21261 use=screen.minitel1,
21263 screen.minitel1b-nb|Screen specific for minitel1b-nb,
21264 colors@, ncv@, pairs@,
21265 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
21266 use=screen.minitel1b,
21268 # From: Alexandre Montaron, 29 Sep 2016
21270 linux-m1|Linux Minitel 1 "like" Couleurs,
21271 am, bw@, ccc, mir, msgr, xenl,
21272 colors#8, it#8, ncv#16, pairs#64,
21273 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
21274 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
21275 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
21276 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21277 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
21278 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
21279 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
21280 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
21281 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
21282 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
21284 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
21285 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
21286 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E\E[A, kent=\EOM,
21287 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
21288 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
21289 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
21290 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
21291 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kil1=\E\E[B,
21292 kmous=\E[M, nel=\EE, oc=\E]R\E]P3FFFF80, op=\E[39;49m,
21293 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
21294 rmpch=\E[10m, rmso=\E[27m, rs1=\Ec, rs3=\E[37;40m\E[8],
21295 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
21296 smacs=^N, smam=\E[?7h, smir=\E[4h, smpch=\E[11m,
21297 smso=\E[7m, tbc=\E[3g, vpa=\E[%i%p1%dd, .VN=\E[?5l,
21298 .VR=\E[?5h, .am@, .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H,
21299 .rmcup=, .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
21301 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21302 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21303 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21304 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21305 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21306 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21307 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21308 \n\n\n\n\n\n\n\n\n\n,
21309 use=vt220+pcedit, use=vt220+cvis, use=linux+decid,
21311 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
21312 # 2. Native brown color corrected to good yellow color.
21313 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
21314 # 4. Suppressed nonexistent underlined mode (normally as bright).
21315 # 5. ich/ich1 not filled because of non-curses programs.
21317 # 6. Suppressed nonexistent invisible mode.
21318 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
21320 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
21322 colors@, ncv@, pairs@,
21323 acsc@, bold=\E[33m, enacs@, initc@,
21324 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
21325 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
21326 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21327 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
21328 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
21329 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
21330 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21333 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
21335 colors@, ncv@, pairs@,
21336 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21337 uvvwwxxyyzz{{||}}~~,
21338 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
21339 enacs=\E)0, initc@,
21340 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
21341 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
21342 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
21344 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
21346 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
21347 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
21348 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
21349 \E]PFFFFFFF\E[;37m,
21352 # From: Alexandre Montaron, 27 May 2020
21353 linux-s|Linux Console with added status line at bottom,
21355 clear=\E[255;255H\E[A\E[1J\E[H, csr@,
21356 dsl=\E7\E[255H\E[K\E8, ed@, fsl=\E8,
21357 iprog=\sbash\s-c\s'echo\s-ne\s"\E[?6l\E[255H\E[A\E[6n"\s;
21358 \sread\s-d\sR\sTMP\s;\sLINES=`echo\s$TMP\s|\scut\s-f1
21359 \s-d\s";"\s|\scut\s-f2\s-d\s"["`\s;\sstty\srows\s$LINE
21360 S\s;\secho\s-ne\s"\E[;"$LINES"r\E[J"',
21361 rs1=\E]R, tsl=\E7\E[255;%p1%dH, .rc@, .sc@, use=linux,
21363 # Screen entries counterpart :
21365 screen.linux-m1|Linux m1 specific for screen,
21367 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
21368 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
21369 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
21370 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
21371 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21372 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21373 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21374 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21375 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21376 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21377 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21378 \n\n\n\n\n\n\n\n\n\n,
21379 use=xterm+x11mouse, use=screen4,
21381 screen.linux-m1b|Linux m1b specific for screen,
21383 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
21385 screen.linux-m2|Linux m2 specific for screen,
21386 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21387 uvvwwxxyyzz{{||}}~~,
21388 use=screen.linux-m1b,
21392 putty-m1|Putty Minitel 1 "like" Couleurs,
21394 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21395 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
21396 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
21397 use=putty+screen, use=xterm+sl-twm, use=ecma+index,
21400 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
21402 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21403 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
21404 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
21405 use=putty+screen, use=xterm+sl-twm, use=ecma+index,
21408 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
21410 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
21412 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21413 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
21414 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
21415 use=putty+screen, use=xterm+sl-twm, use=ecma+index,
21418 putty+screen|PuTTY with screen resizing extensions,
21419 .WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l,
21421 putty-screen|PuTTY with screen resizing extensions,
21422 WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l, use=putty,
21424 screen.putty-m1|Putty m1 specific for screen,
21425 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
21427 screen.putty-m1b|Putty m1b specific for screen,
21429 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
21431 screen.putty-m2|Putty m2 specific for screen,
21432 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21433 uvvwwxxyyzz{{||}}~~,
21434 use=screen.putty-m1b,
21435 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
21438 # viewdata lacks a true cup capability,
21439 # so I achieved it with home and cud1/cuf1 sequences only !
21440 viewdata|prestel/viewdata terminals,
21443 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
21445 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
21446 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
21447 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
21448 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
21449 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
21450 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
21451 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
21453 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
21454 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
21456 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
21457 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
21458 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
21459 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
21460 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
21461 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
21462 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
21463 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
21464 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
21465 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
21466 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
21467 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
21468 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
21469 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
21470 .ll=^^^K, use=viewdata,
21472 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
21474 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
21476 rmso=\EG, smso=\EB, use=viewdata-o,
21478 ######## OBSOLETE VDT TYPES
21480 # These terminals are *long* dead -- these entries are retained for
21481 # historical interest only.
21483 #### Amtek Business Machines
21486 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
21487 # but these caps were commented out in 8.3; also, removed overridden
21488 # ":do=^J:" -- esr)
21489 abm80|amtek business machines 80,
21492 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
21493 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
21494 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
21496 #### Bell Labs blit terminals
21498 # These were AT&T's official entries. The 5620 FAQ maintained by
21499 # David Breneman <daveb@dgtl.com> has this to say:
21501 # Actually, in the beginning was the Jerq, and the Jerq was white with a
21502 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
21503 # was good. But lo, upon the horizon loomed a mighty management-type person
21504 # (known now only by the initials VP) who said, the mighty Jerq must stay
21505 # alone, and could not go forth into the world. So Locanthi and Pike put the
21506 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
21507 # world. And the Jerq lived the rest of its days in research, but never
21508 # strayed from those paths.
21510 # In all seriousness, the Blit was originally known as the Jerq, but when
21511 # it started to be shown outside of the halls of the Bell Labs Research
21512 # organization, the management powers that be decided that the name could
21513 # not remain. So it was renamed to be Blit. This was in late 1981.
21515 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
21519 blit|jerq|blit running teletype rom,
21521 cols#87, it#8, lines#72,
21522 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
21523 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
21524 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
21525 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
21526 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
21527 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
21529 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
21530 cbblit|fixterm|blit running columbus code,
21532 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
21533 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
21534 smul=\EU", use=blit,
21536 oblit|ojerq|first version of blit rom,
21537 am, da, db, eo, mir, ul, xon,
21538 cols#88, it#8, lines#72,
21539 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
21540 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
21541 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
21542 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
21545 #### Bolt, Beranek & Newman (bbn)
21547 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
21548 # The parent company, best known as the architects of the Internet, is
21551 # Jeff DelPapa <dp@world.std.com> writes:
21552 # The bitgraph was a large white box that contained a monochrome bitmap
21553 # display, and a 68000 to run it. You could download code and run it on
21554 # the cpu, it had 128kb (I think) of memory. I used one in the late
21555 # 70's, sure beat a vt100. It had one strange feature tho -- it used
21556 # the cpu to bitblt pixels to scroll, it took longer than the refresh
21557 # rate, and looked like a rubber sheet stretching, then snapping
21558 # upwards. It had everything the early mac had, except a floppy drive a
21559 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
21560 # Beranek and Neuman) sold at most a few hundred of them to the real
21561 # world. DOD may have bought more...
21564 # Entries for the BitGraph terminals. The problem
21565 # with scrolling in vi can only be fixed by getting BBN to put
21566 # smarter scroll logic in the terminal or changing vi or padding
21567 # scrolls with about 500 ms delay.
21569 # I always thought the problem was related to the terminal
21570 # counting newlines in its input buffer before scrolling and
21571 # then moving the screen that much. Then vi comes along and
21572 # paints lines in on the bottom line of the screen, so you get
21573 # this big white gap.
21575 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
21576 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21578 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
21579 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21581 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
21584 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
21585 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
21586 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
21587 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
21588 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21589 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
21590 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
21591 sgr0=\E[m, smkx=\E=, smso=\E[7m,
21593 bg1.25rv|bbn bitgraph 1.25 (reverse video),
21594 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21596 bg1.25nv|bbn bitgraph 1.25 (normal video),
21597 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21599 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
21600 bg1.25|bbn bitgraph 1.25,
21602 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
21603 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
21604 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
21605 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
21606 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
21607 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
21608 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
21611 #### Bull (bq, dku, vip)
21613 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
21615 #============================================#
21616 # BULL QUESTAR 210 `SDP' terminals emulation #
21617 #============================================#
21619 # Description written by R.K.Saunders (Bull Transac)
21621 # Modifications written by F. Girard (Bull MTS)
21622 # 19-05-87 V02.00.01
21623 # 17-12-87 V02.00.02
21624 # 15-09-89 V02.00.05
21626 # Typical technical selections F1 (modes SDP/ROLL):
21627 # -------------------------------------------------------
21628 # | 01 02 03 04 05 06 07 08 09 10 |
21629 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
21631 # | 11 12 13 14 15 16 17 18 19 20 |
21632 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
21634 # | 21 22 23 24 25 26 27 28 29 30 |
21635 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
21637 # | 31 32 33 34 35 36 37 38 39 40 |
21638 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
21639 # -------------------------------------------------------
21640 # Typical firmware identification F5 "etat 6":
21641 # P287.02.04b (AZERTY)
21642 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
21643 # P298.03.03 (monochrome) or P374.03.02 (colour)
21645 # SM SDP mode (VIP command): ^[[?=h
21646 # RIS (erases screen): ^[c
21647 # DMI disable keyboard: ^[`
21648 # SM double rendition mode: ^[[?>h
21649 # RM solicited status mode: ^[[5l
21650 # RM character mode: ^[[>l
21651 # RM echoplex mode: ^[[12l
21652 # RM column tab mode: ^[[18l
21653 # RM forbid SS2 keyboard mode: ^[[?<l
21654 # SM scroll mode: ^[[=h
21655 # FCF enable XON/XOFF: ^[P1s^[\
21656 # MTL select end msg character: ^[[^Wp
21657 # EMI enable keyboard: ^[b
21658 # RIS retour etat initial: ^[c
21659 # enable FC keypad: ^[[?<h,
21660 # MPW map status line window: ^[PY99:98^[\
21661 # SCP select status line: ^[[0;98v
21662 # ED erase entire partition: ^[[2J
21663 # SCP select main partition: ^[[v
21664 # SM character insertion mode: ^[[4h
21665 # RM character replacement mode: ^[[4l
21666 # COO cursor on: ^[[r
21667 # COO cursor off: ^[[1r
21668 # SGR dim (turquoise) rev attr: ^[[2;7m
21669 # SGR Data normal attr: ^[[m
21670 # SO Line-graphic mode ON: ^N
21671 # SI Line-graphic mode OFF: ^O
21672 # MC start routing to printer: ^[[5i
21673 # MC stop routing to printer: ^M^[[4i
21676 # This entry covers the following terminals:
21677 # dku7102, tws2102, and tws models 2105 to 2112
21678 tws-generic|dku7102|Bull Questar tws terminals,
21679 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
21680 cols#80, it#8, lines#24, wsl#80,
21681 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
21682 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
21683 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
21684 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
21685 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21686 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
21687 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
21688 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
21689 il1=\E[L, ind=\n, invis=\E[0;8m,
21690 is1=\E[?=h\Ec\E`\E[?>h\EPY99:98\E\\,
21691 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
21692 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
21693 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
21694 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
21695 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
21696 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
21697 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
21698 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
21699 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
21700 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
21701 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
21702 %p7%t;8%;m%?%p9%t\016%e\017%;,
21703 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99:98\E\\,
21704 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
21705 tsl=\EPY99:98\E\\\E[0;98v\E[2;7m,
21706 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
21707 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
21709 tws2103|xdku|BULL Questar tws2103,
21710 ht=^I, use=tws-generic,
21711 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
21712 ht=^I, use=tws2102-sna,
21713 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
21714 clear=\E[2J\E[H, cup@, dl@, dl1@,
21715 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
21716 il@, il1@, tsl=\EPY99:98\E\\\E[0;98v\E[H\E[2;7m,
21718 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
21719 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
21720 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
21721 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
21722 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
21724 #=========================================================#
21725 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
21726 #=========================================================#
21728 # Description written by J. Staerck (BULL SA)
21729 # Copyright (c) 1989 BULL SA
21730 #---------------------------------------------------------------------------
21731 # This entry is used for terminals with vt320 emulation mode
21732 # and following set-up :
21733 # 8 bit ISO Latin Character Set (ISO 8859-1),
21734 # 7 bit Control Characters,
21735 # 80 columns screen.
21736 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
21737 # They are used in string capabilities with vt220-320 emulation mode.
21738 # In the following DEC definitions, two kinds of terminfo databases are
21740 # 1. the first with Command Sequence Introducer starting with escape
21741 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
21742 # 2. the second with Command Sequence Introducer starting with escape
21743 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
21744 # Soft Terminal Reset esc [ ! p
21745 # RIS (erases screen): esc c
21746 # DECKPNM numeric keypad mode: esc >
21747 # DECKPAM applic. keypad mode: esc =
21748 # DECSTBM Scrolling region: esc [ r
21749 # SCS select G0 = US: esc ( B
21750 # SCS select G1 = line-graphic: esc ) 0
21751 # Select 7-bit C1 controls: esc sp F
21752 # Select 8-bit C1 controls: esc sp G
21753 # Select cursor home: esc [ H
21754 # Select erase screen: esc [ J
21755 # SM KAM lock keyboard: esc [ 2 h
21756 # RM KAM unlock keyboard: esc [ 2 l
21757 # SM SRM local echo off: esc [ 1 2 h
21758 # RM SRM local echo on: esc [ 1 2 l
21759 # SM LNM New line : esc [ 2 0 h
21760 # RM LNM return = CR only: esc [ 2 0 l
21761 # SM DECCKM cursor keys mode: esc [ ? 1 h
21762 # RM DECCKM appli. keys mode: esc [ ? 1 l
21763 # SM DECANM ANSI mode on: esc [ ? 2 h
21764 # RM DECANM ANSI mode off: esc [ ? 2 l
21765 # SM DECCOLM 132-column screen: esc [ ? 3 h
21766 # RM DECCOLM 80-column screen: esc [ ? 3 l
21767 # SM DECSCLM Smooth scroll: esc [ ? 4 h
21768 # RM DECSCLM Jump scroll: esc [ ? 4 l
21769 # SM DECSCNM screen light backgr. esc [ ? 5 h
21770 # RM DECSCNM screen dark backgr. esc [ ? 5 l
21771 # SM DECOM move within margins: esc [ ? 6 h
21772 # RM DECOM move outside margins: esc [ ? 6 l
21773 # SM DECAWM auto right margin: esc [ ? 7 h
21774 # RM DECAWM auto right margin: esc [ ? 7 l
21775 # SM DECARM auto repeat: esc [ ? 8 h
21776 # RM DECARM auto repeat: esc [ ? 8 l
21777 # DECSASD Select active main: esc [ 0 $ }
21778 # DECSASD Select active status: esc [ 1 $ }
21779 # DECSSDT Select status none: esc [ 0 $ ~
21780 # DECSSDT Select status indic.: esc [ 1 $ ~
21781 # DECSSDT Select status host-wr: esc [ 2 $ ~
21782 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
21783 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
21784 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
21785 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
21786 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
21787 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
21788 # SM DECKBUM clavier informatique esc [ ? 6 8 h
21789 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
21790 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
21791 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
21792 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
21793 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
21794 # Char. and Line attributes: esc [ Ps ... Ps m
21795 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
21796 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
21799 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
21800 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
21801 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
21802 cols#80, it#8, lines#24, vt#3, wsl#80,
21803 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21804 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
21805 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
21806 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
21807 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21808 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
21809 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
21810 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
21811 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
21812 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
21813 is1=\E[63;1"p\E[2h,
21814 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21816 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
21817 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
21818 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
21819 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
21820 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
21821 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
21822 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~,
21823 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE,
21824 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
21825 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
21826 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
21828 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
21829 %;m%?%p9%t\E(0%e\E(B%;,
21830 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
21831 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
21832 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
21833 use=vt220+vtedit, use=ansi+pp, use=vt220+cvis,
21834 bq300-rv|Bull vt320 reverse 80 columns,
21835 flash=\E[?5l$<50>\E[?5h,
21836 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21839 bq300-w|Bull vt320 132 columns,
21841 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21843 rs2=\E[?3h, use=bq300,
21844 bq300-w-rv|Bull vt320 reverse mode 132 columns,
21846 flash=\E[?5l$<50>\E[?5h,
21847 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21849 rs2=\E[?3h, use=bq300,
21851 # This entry is used for terminals with vt320 emulation mode
21852 # and following set-up :
21853 # 8 bit ISO Latin Character Set (ISO 8859-1),
21854 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
21855 # 80 columns screen.
21856 # Soft Terminal Reset csi ! p
21857 # RIS (erases screen): esc c
21858 # DECKPNM numeric keypad mode: esc >
21859 # DECKPAM applic. keypad mode: esc =
21860 # DECSTBM Scrolling region: esc [ r
21861 # SCS select G0 = US: esc ( B
21862 # SCS select G1 = line-graphic: esc ) 0
21863 # Select 7-bit C1 controls: esc sp F
21864 # Select 8-bit C1 controls: esc sp G
21865 # Select cursor home: csi H
21866 # Select erase screen: csi J
21867 # SM KAM lock keyboard: csi 2 h
21868 # RM KAM unlock keyboard: csi 2 l
21869 # SM SRM local echo off: csi 1 2 h
21870 # RM SRM local echo on: csi 1 2 l
21871 # SM LNM New line : csi 2 0 h
21872 # RM LNM return = CR only: csi 2 0 l
21873 # SM DECCKM cursor keys mode: csi ? 1 h
21874 # RM DECCKM appli. keys mode: csi ? 1 l
21875 # SM DECANM ANSI mode on: csi ? 2 h
21876 # RM DECANM ANSI mode off: csi ? 2 l
21877 # SM DECCOLM 132-column screen: csi ? 3 h
21878 # RM DECCOLM 80-column screen: csi ? 3 l
21879 # SM DECSCLM Smooth scroll: csi ? 4 h
21880 # RM DECSCLM Jump scroll: csi ? 4 l
21881 # SM DECSCNM screen light backgr. csi ? 5 h
21882 # RM DECSCNM screen dark backgr. csi ? 5 l
21883 # SM DECOM move within margins: csi ? 6 h
21884 # RM DECOM move outside margins: csi ? 6 l
21885 # SM DECAWM auto right margin: csi ? 7 h
21886 # RM DECAWM auto right margin: csi ? 7 l
21887 # SM DECARM auto repeat: csi ? 8 h
21888 # RM DECARM auto repeat: csi ? 8 l
21889 # DECSASD Select active main: csi 0 $ }
21890 # DECSASD Select active status: csi 1 $ }
21891 # DECSSDT Select status none: csi 0 $ ~
21892 # DECSSDT Select status indic.: csi 1 $ ~
21893 # DECSSDT Select status host-wr: csi 2 $ ~
21894 # SM DECTCEM Visible cursor: csi ? 2 5 h
21895 # RM DECTCEM Invisible cursor: csi ? 2 5 l
21896 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
21897 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
21898 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
21899 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
21900 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
21901 # Char. and Line attributes: csi Ps ... Ps m
21902 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
21903 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
21904 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
21905 bq300-8|Bull vt320 full 8 bits 80 columns,
21906 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
21907 cols#80, it#8, lines#24, vt#3, wsl#80,
21908 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21909 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
21910 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
21911 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
21912 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
21913 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
21914 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
21915 el=\233K, el1=\2331K, enacs=\E(B\E)0,
21916 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
21917 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
21918 ind=\ED, is1=\E[63;2"p\E[2h,
21919 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21921 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
21922 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
21923 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
21924 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
21925 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
21926 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
21927 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
21928 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
21929 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
21930 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
21931 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
21932 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
21933 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
21934 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
21935 s0ds=\E(B, s1ds=\E(0, sc=\E7,
21936 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
21937 1%;m%?%p9%t\E(0%e\E(B%;,
21938 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
21939 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
21940 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
21942 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
21943 flash=\233?5l$<50>\233?5h,
21944 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21947 bq300-8w|Bull vt320 8-bit 132 columns,
21949 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21951 rs2=\233?3h, use=bq300-8,
21952 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
21954 flash=\233?5l$<50>\233?5h,
21955 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21957 rs2=\233?3h, use=bq300-8,
21959 # This entry is used for terminals with vt320 emulation mode
21960 # a 102 keys keyboard (PC scancode !) and following set-up :
21961 # 8 bit ISO Latin Character Set (ISO 8859-1),
21962 # 7 bit Control Characters,
21963 # 80 columns screen.
21964 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
21965 kbs=^H, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~,
21966 kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[18~, kf20@,
21967 kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~,
21968 kf8=\E[25~, kf9=\E[26~, kfnd@, khlp@, krdo@, kslt@, lf1@, lf2@,
21969 lf3@, lf4@, use=vt220+pcedit, use=bq300,
21970 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
21971 flash=\E[?5l$<50>\E[?5h,
21972 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21975 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
21977 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21979 rs2=\E[?3h, use=bq300-pc,
21980 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
21982 flash=\E[?5l$<50>\E[?5h,
21983 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21985 rs2=\E[?3h, use=bq300-pc,
21986 # 8 bit ISO Latin Character Set (ISO 8859-1),
21987 # 8 bit Control Characters,
21988 # 80 columns screen.
21989 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
21990 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
21991 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
21992 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
21993 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
21994 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
21995 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
21996 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
21997 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
21998 flash=\E[?5l$<50>\E[?5h,
21999 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22002 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
22004 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22006 rs2=\E[?3h, use=bq300-8-pc,
22007 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
22009 flash=\E[?5l$<50>\E[?5h,
22010 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22012 rs2=\E[?3h, use=bq300-8-pc,
22014 #======================================================#
22015 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
22016 #======================================================#
22018 # normal mode, 8 bits, 80 columns terminal.
22019 # BLD bell disable ^[g
22020 # BLE bell enable ^[h
22021 # CAMR char. attr. mode reset ^[[G
22022 # CAMS char. attr. mode set ^[[D
22024 # CM character mode (async.) ^[k
22025 # EP echoplex mode (by host) ^[m
22026 # IM insert mode set ^[[I
22027 # IMR insert mode reset ^[[J
22028 # KBL keyboard lock (reset) ^[[X
22029 # KBU keyboard unlock (set) ^[[W
22030 # LGR Line-graphic mode reset ^[F
22031 # LGS Line-graphic mode set ^[G
22032 # NEP non echoplex mode (by host) ^[l
22033 # PDS print data space ^[[0p
22034 # PDT print data terminator ^[[<p
22035 # PHD print host data ^[[3p
22036 # PRES print adapter reset ^[[2p
22037 # RBM block mode reset ^[[E
22039 # RIS reset initial state: ^[c
22040 # RMR roll mode reset ^[q
22041 # RMS roll mode set ^[r
22042 # SCD scroll down (72 lines) ^[[1s
22043 # SCU scroll up (72 lines) ^[[0s
22044 # SLL status line lock ^[O
22045 # SLR status line reset ^[v
22046 # SLS status line set ^[w
22047 # SM78 set mode vip7800 ^[[1q
22048 # SSP0 partition 0 set ^[[00u
22049 # SSP1 partition n format 1 ^[[PnPnSTRINGu
22050 # SSP2 partition n format 2 ^[[PnPnSTRINGu
22051 # SSP3 partition n format 3 ^[[PnPnu
22052 # SSPR multi-part. reset ^[[<>u
22053 # TBC tab clear (at cursor pos.) ^[[g
22054 # TBI tab initialize ^[[N
22055 # TBS tab set (at cursor pos.) ^[p
22057 # ATR attribute (visual)
22060 # hide (blank) : ^[sH
22061 # inverse video : ^[sI
22066 # This covers the vip7800 and BQ3155-vip7800
22067 vip|Bull Questar 3155-7800,
22068 am, eslok, hs, km, mc5i, msgr, xenl, xon,
22069 cols#80, it#8, lines#24, vt#3, wsl#80,
22070 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
22071 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22072 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
22073 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
22074 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
22075 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
22076 is2=\E[00u\E[<>001001024080024080u\E[01u,
22077 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
22078 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
22079 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
22080 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
22081 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
22082 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
22083 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
22084 kf4=\E8, kf5=\E:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
22085 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
22086 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
22087 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
22088 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
22089 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
22090 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
22091 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
22092 smul=\Es_, tbc=\E[N, tsl=\Ew,
22093 # normal screen, 8 bits, 132 columns terminal.
22094 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
22096 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
22097 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
22099 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
22100 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
22101 cols#132, lines#72, wsl#132,
22102 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
22107 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
22108 # that is smaller than the screen, and puts up a warning message
22109 # outside the window. Te erases the warning message, puts the
22110 # window back to be the whole screen, and puts the cursor at just
22111 # below the small window. I defined <cnorm> and <civis> to really turn
22112 # the cursor on and off, but I have taken this out since I don't
22113 # like the cursor being turned off when vi exits.
22114 cg7900|chromatics|chromatics 7900,
22117 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
22118 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
22119 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
22120 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
22122 rmso=\001C1\,\001c2\,,
22123 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
22124 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
22125 \001W0\,0\,79\,39\,,
22126 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
22128 #### Computer Automation
22131 ca22851|computer automation 22851,
22134 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
22135 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
22136 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
22141 # This entry has correct padding and the undocumented "ri" capability
22142 cyb83|xl83|cybernex xl-83,
22145 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
22146 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
22147 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
22148 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
22149 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
22150 cyb110|mdl110|cybernex mdl-110,
22153 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
22154 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
22155 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
22156 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
22157 ht=\011$<43>, ich1=\016A\035$<3.5>,
22158 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
22162 # Datapoint is gone. They used to be headquartered in Texas.
22163 # They created ARCnet, an Ethernet competitor that flourished for a while
22164 # in the early 1980s before 3COM got wise and cut its prices. The service
22165 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
22168 dp3360|datapoint|datapoint 3360,
22171 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
22172 ed=^_, el=^^, home=^], ind=\n,
22174 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
22175 # The Datapoint 8242 Workstation was sold at least between 1985
22176 # and 1989. To make the terminal work with this entry, press
22177 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
22178 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
22179 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
22180 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
22181 # fact unusable because the strings sent by the terminal conflict
22182 # with other keys).
22183 # The terminal is capable of displaying "box draw" characters.
22184 # For each graphic character you must send 2 ESC's (\E\E) followed
22185 # by a control character as follows:
22186 # character meaning
22187 # ========= =======
22190 # ctrl-G bottom tee
22193 # ctrl-J top left corner
22194 # ctrl-K top right corner
22195 # ctrl-L bottom left corner
22196 # ctrl-M bottom right corner
22197 # ctrl-N horizontal line
22198 # ctrl-O vertical line
22199 # Unfortunately this cannot be fitted into the termcap/terminfo
22200 # description scheme.
22201 dp8242|datapoint 8242,
22204 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
22205 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
22206 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
22207 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22208 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
22209 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
22210 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
22211 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
22212 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22213 smso=\E^E, smul=\E^F,
22214 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
22217 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
22219 # These entries came from DEC's official terminfos for its older terminals
22220 # (which happen to be identical to the AT&T/SCO terminal descriptions),
22221 # Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support Engineering
22222 # may have had more information. Updated terminfos and termcaps were available
22223 # at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
22225 # DEC's terminfos did not describe the auxiliary keypad.
22227 # DECScope of course had no "function keys", but this building block assigns
22228 # the three blank keys at the top of the auxiliary (numeric) keypad, using
22229 # the same analogy as vt100 (also lacking function-keys).
22231 # These assignments use the same layout for 0-9 as vt100+keypad; the vt52
22232 # keypad had its cursor-keys on the right-column as shown -TD
22233 # _______________________________________
22234 # | PF1 | PF2 | PF3 | c-up |
22235 # | \EP | \EQ | \ER | \EA |
22236 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|kcuu1_k4_|
22238 # | \E?w | \E?x | \E?y | \EB |
22239 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|kcud1____|
22240 # | 4 | 5 | 6 | c-right |
22241 # | \E?t | \E?u | \E?v | \EC |
22242 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|kcuf1_k8_|
22243 # | 1 | 2 | 3 | c-left |
22244 # | \E?q | \E?r | \E?s | \ED |
22245 # |_ka1__K1_|_kb2__K2_|_ka3__K3_|kcub1____|
22246 # | 0 | . | enter |
22247 # | \E?p | \E?n | \E?M |
22248 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
22250 vt52+keypad|DECScope auxiliary keypad,
22251 ka1=\E?q, ka3=\E?s, kb2=\E?r, kc1=\E?p, kc3=\E?n, kf0=\E?y,
22252 kf1=\EP, kf2=\EQ, kf3=\ER, kf5=\E?t, kf6=\E?u, kf7=\E?v,
22253 kf8=\E?w, kf9=\E?x,
22258 bel=^G, cr=\r, cub1=^H, cud1=\n,
22262 bel=^G, cr=\r, cub1=^H, cud1=\n,
22267 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22268 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n, u8=\E/A, u9=\EZ,
22270 cub1=\ED, cud1=\EB, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22271 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, u8=\E/[HJ],
22272 use=vt52+keypad, use=vt50,
22274 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
22275 vt61|vt-61|vt61.5|dec vt61,
22277 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
22278 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
22279 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
22280 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
22283 # The gigi does standout with red!
22284 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
22285 gigi|vk100|dec gigi graphics terminal,
22288 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
22289 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
22290 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
22291 el=\E[K, ht=^I, ind=\n,
22292 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
22293 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
22294 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
22295 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22296 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
22299 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
22300 # a PC differentiated from the IBM clones. It was a total, ludicrous,
22301 # grossly-overpriced failure (among other things, DEC's OS didn't include
22302 # a format program, so you had to buy pre-formatted floppies from DEC at
22303 # a hefty premium!).
22304 pro350|decpro|dec pro console,
22306 cols#80, it#8, lines#24,
22307 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22308 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
22309 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
22310 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22311 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
22312 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
22313 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
22318 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
22319 dw2|decwriter|dw|decwriter II,
22322 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
22323 # \E(B Use U.S. character set (otherwise # => british pound !)
22324 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
22325 # \E[w 10 char/in pitch
22326 # \E[1;132 full width horizontal margins
22327 # \E[2g clear all tab stops
22329 # \E[66t 66 lines/page (for \f)
22330 # \E[1;66r full vertical page can be printed
22331 # \E[4g clear vertical tab stops
22332 # \E> disable alternate keypad mode (so it transmits numbers!)
22333 # \E[%i%p1%du set tab stop at column %d (origin == 1)
22334 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
22337 # The dw3 does standout with wide characters.
22339 dw3|la120|decwriter III,
22342 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
22343 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
22344 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
22346 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
22350 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
22351 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
22353 # These aren't official
22354 ln03|dec ln03 laser printer,
22357 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
22358 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
22360 ln03-w|dec ln03 laser printer 132 cols,
22362 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
22363 kcud1=\n, nel=\r\n, use=ln03,
22365 #### Delta Data (dd)
22368 # Untested. The cup sequence is hairy enough that it probably needs work.
22369 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
22370 # There are BSD-derived termcap entries floating around for this puppy
22371 # that are *certainly* wrong.
22372 delta|dd5000|delta data 5000,
22375 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
22376 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
22378 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
22380 #### Digital Data Research (ddr)
22383 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
22384 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
22386 cols#80, it#8, lines#24, vt#3,
22387 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22388 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
22389 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
22390 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
22391 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
22392 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
22393 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
22394 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
22395 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
22396 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
22397 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
22400 #### Evans & Sutherland
22403 # Jon Leech <leech@cs.unc.edu> tells us:
22404 # The ps300 was the Evans & Sutherland Picture System 300, a high
22405 # performance 3D vector graphics system with a bunch of specialized hardware.
22406 # Approximate date of release was 1982 (early 80s, anyway), and it had several
22407 # evolutions including (limited) color versions such as the PS330C. PS300s
22408 # were effectively obsolete by the late 80s, replaced by raster graphics
22409 # systems, although specialized applications like molecular modeling
22410 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
22411 # are out of production, though of course E&S is very much alive (in 1996).
22412 # (ps300: changed ":pt@:" to "it@" -- esr)
22414 ps300|Picture System 300,
22417 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
22419 #### General Electric (ge)
22422 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
22425 bel=^G, cr=\r, cud1=\n, ind=\n,
22427 #### Heathkit/Zenith
22430 # Here is a description of the H19 DIP switches:
22433 # 0-3 = baud rate as follows:
22438 # 0 1 0 1 1200 baud
22439 # 1 0 0 0 2400 baud
22440 # 1 0 1 0 4800 baud
22441 # 1 1 0 0 9600 baud
22442 # 1 1 0 1 19.2K baud
22444 # 4 = parity (0 = no parity)
22445 # 5 = even parity (0 = odd parity)
22446 # 6 = stick parity (0 = normal parity)
22447 # 7 = full duplex (0 = half duplex)
22450 # 0 = block cursor (0 = underscore cursor)
22451 # 1 = no key click (0 = keyclick)
22452 # 2 = wrap at end of line (0 = no wrap)
22453 # 3 = auto LF on CR (0 = no LF on CR)
22454 # 4 = auto CR on LF (0 = no CR on LF)
22455 # 5 = ANSI mode (0 = VT52 mode)
22456 # 6 = keypad shifted (0 = keypad unshifted)
22457 # 7 = 50Hz refresh (1 = 60Hz refresh)
22459 # Factory Default settings are as follows:
22461 # S401 1 0 0 0 1 1 0 0
22462 # S402 0 0 0 0 0 0 0 0
22463 # (h19: I added <rmam>/<smam> based on the init string;
22464 # also added empty <acsc> to suppress a tic warning -- esr)
22465 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
22466 OTbs, am, mir, msgr,
22467 cols#80, it#8, lines#24,
22468 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
22469 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
22470 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
22471 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
22472 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
22473 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
22474 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
22475 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
22476 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
22477 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
22478 h19-bs|heathkit w/keypad shifted,
22479 rmkx=\Eu, smkx=\Et, use=h19-b,
22480 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
22481 rmkx=\Eu, smkx=\Et, use=h19-u,
22482 # (h19: merged in <ip> from BSDI hp19-e entry>;
22483 # also added empty <acsc> to suppress a tic warning --esr)
22484 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
22485 # Tim tells us that:
22486 # I have an old Zenith-19 terminal at home that still gets a lot of use.
22487 # This terminal suffers from the same famous insert-mode padding lossage
22488 # that has been acknowledged for the Z29 terminal. Emacs is nearly
22489 # unusable on this box, since even a half-scroll up or down the window
22490 # causes flaming terminal death.
22492 # On the Z19, the only way I have found around this problem is to remove
22493 # the :al: and :dl: entries entirely. No amount of extra padding will
22494 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
22495 # makes Emacs a little slower, but it remains in the land of the living.
22497 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
22498 OTbs, am, eslok, hs, mir, msgr,
22499 cols#80, it#8, lines#24,
22500 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
22501 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22502 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
22503 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
22504 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22505 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
22506 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
22507 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
22508 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
22509 h19-u|heathkit with underscore cursor,
22510 cnorm@, cvvis@, use=h19-b,
22511 h19-g|h19g|heathkit w/block cursor,
22512 cnorm=\Ex4, cvvis@, use=h19-b,
22513 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
22515 dl1=\EM, il1=\EL, use=h19,
22517 # The major problem with the Z29 is that it requires more padding than the Z19.
22519 # The problem with declaring an H19 to be synonymous with a Z29 is that
22520 # it needs more padding. It especially loses if a program attempts
22521 # to put the Z29 into insert mode and insert text at 9600 baud. It
22522 # even loses worse if the program attempts to insert tabs at 9600
22523 # baud. Adding padding to text that is inserted loses because in
22524 # order to make the Z29 not die, one must add so much padding that
22525 # whenever the program tries to use insert mode, the effective
22526 # rate is about 110 baud.
22528 # What program would want to put the terminal into insert mode
22529 # and shove stuff at it at 9600 baud you ask?
22531 # Emacs. Emacs seems to want to do the mathematically optimal
22532 # thing in doing a redisplay rather than the practical thing.
22533 # When it is about to output a line on top of a line that is
22534 # already on the screen, instead of just killing to the end of
22535 # the line and outputting the new line, it compares the old line
22536 # and the new line and if there are any similarities, it
22537 # constructs the new line by deleting the text on the old line
22538 # on the terminal that is already there and then inserting new
22539 # text into the line to transform it into the new line that is
22540 # to be displayed. The Z29 does not react kindly to this.
22542 # But don't cry for too long.... There is a solution. You can make
22543 # a termcap entry for the Z29 that says the Z29 has no insert mode.
22544 # Then Emacs cannot use it. "Oh, no, but now inserting into a
22545 # line will be really slow", you say. Well there is a sort of a
22546 # solution to that too. There is an insert character option on
22547 # the Z29 that will insert one character. Unfortunately, it
22548 # involves putting the terminal into ansi mode, inserting the
22549 # character, and changing it back to H19 mode. All this takes 12
22550 # characters. Pretty expensive to insert one character, but it
22551 # works. Either Emacs doesn't try to use its inserting hack when
22552 # it's only given an insert character ability or the Z29 doesn't
22553 # require padding with this (the former is probably more likely,
22554 # but I haven't checked it out).
22555 # (z29: added empty <acsc> to suppress a tic warning, merged in
22556 # status line capabilities from BRL entry --esr)
22557 z29|zenith29|z29b|zenith z29b,
22558 OTbs, OTpt, am, eslok, hs, mir, msgr,
22559 OTkn#10, cols#80, lines#24,
22560 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
22561 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22562 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
22563 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
22564 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
22565 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
22566 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22567 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
22568 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
22569 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
22570 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
22571 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
22572 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
22573 # the world is stable. <rs1> causes the terminal to be reset to the state
22574 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
22575 # cursor, bc -> block cursor.
22576 # From: Mike Meyers
22577 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
22578 # looks vt100-compatible -- esr)
22579 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
22580 OTbs, OTpt, am, eslok, hs, mir, msgr,
22581 OTkn#10, cols#80, it#8, lines#24,
22582 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
22583 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
22584 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
22585 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22586 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
22587 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
22588 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
22589 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
22590 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
22591 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
22592 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
22593 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
22594 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
22595 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
22597 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
22598 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
22599 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
22600 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
22603 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
22604 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
22607 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
22608 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
22611 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
22612 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
22613 am, eslok, hs, mc5i, mir, msgr, xon,
22615 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
22616 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
22617 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
22618 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
22619 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
22620 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22621 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
22622 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
22623 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
22624 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
22625 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
22626 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
22627 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
22628 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
22629 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
22630 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
22631 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
22632 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22633 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
22635 # From: Brad Brahms <Brahms@USC-ECLC>
22636 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
22637 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
22638 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
22639 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
22640 OTbs, OTpt, mir, msgr,
22641 OTkn#10, cols#80, it#8, lines#24,
22642 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
22643 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
22644 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
22645 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
22646 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
22647 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
22648 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
22649 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
22650 smir=\E@, smso=\Ep,
22651 p19|h19-b with il1/dl1,
22652 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
22653 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
22654 # (ztx: removed duplicate :sr: -- esr)
22655 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
22656 OTbs, am, eslok, hs,
22657 cols#80, it#8, lines#24,
22658 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
22659 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
22660 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
22661 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
22662 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
22663 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
22664 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
22665 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
22667 #### IMS International (ims)
22669 # There was a company called IMS International located in Carson City,
22670 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
22671 # bus/Z80 hardware and a line of terminals called Ultimas.
22674 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
22675 ims950-b|bare ims950 no init string,
22677 # (ims950: removed obsolete ":ko@:" -- esr)
22678 ims950|ims televideo 950 emulation,
22680 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
22681 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
22682 # (ims950-rv: removed obsolete ":ko@:" -- esr)
22683 ims950-rv|ims tvi950 rev video,
22685 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
22686 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
22687 ims-ansi|ultima2|ultimaII|IMS Ultima II,
22689 cols#80, it#8, lines#24,
22690 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
22691 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
22692 ht=^I, if=/usr/share/tabset/vt100,
22693 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
22694 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
22695 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
22698 #### Intertec Data Systems
22700 # I think this company is long dead as of 1995. They made an early CP/M
22701 # micro called the "Intertec Superbrain" that was moderately popular,
22702 # then sank out of sight.
22705 superbrain|intertec superbrain,
22708 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
22709 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
22710 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
22711 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
22712 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
22713 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
22714 # and the reverse is actually true. Try it. -- esr)
22715 intertube|intertec|Intertec InterTube,
22718 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
22719 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
22720 ind=\n, rmso=\E0@, smso=\E0P,
22721 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
22722 # are typing and a command comes in, the keystrokes you type get interspersed
22723 # with the command and it messes up
22724 intertube2|intertec data systems intertube 2,
22726 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
22727 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
22728 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
22730 #### Ithaca Intersystems
22732 # This company made S100-bus personal computers long ago in the pre-IBM-PC
22733 # past. They used to be reachable at:
22735 # Ithaca Intersystems
22736 # 1650 Hanshaw Road
22737 # Ithaca, New York 14850
22739 # However, the outfit went bankrupt years ago.
22742 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
22743 # These entries were written (originally in termcap syntax) by Brian Yandell
22744 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
22745 # University of Wisconsin.
22747 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
22748 # removed <if=/usr/share/tabset/init.graphos> and
22749 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
22750 graphos|graphos III,
22752 cols#80, it#8, lines#24,
22753 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
22754 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
22755 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22756 cuu=\E[%p1%dA, cuu1=\E[A,
22757 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
22758 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
22759 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22760 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
22761 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
22762 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
22763 smir=\E[4h, smso=\E[7m,
22764 graphos-30|graphos III with 30 lines,
22766 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
22770 # These people used to be reachable at:
22773 # 1393 Main Street,
22774 # Waltham, MA 02154
22775 # Vox: (617)-890-5796.
22777 # However, if you call that number today you'll get an insurance company.
22778 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
22779 # 26 Feb 1997 that says:
22781 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
22782 # for ~7 years. Modgraph still in business. Products are rugged laptop and
22783 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
22784 # panel-mount etc). I can be emailed at sonfour@aol.com
22786 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
22787 # dated 1984. According to the manual, it featured Tek 4010/4014
22788 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
22791 modgraph|mod24|modgraph terminal emulating vt100,
22794 cvvis=\E\^9;0s\E\^7;1s,
22795 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
22796 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
22797 \E\^11;81s\E\^11;89s,
22798 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
22799 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
22800 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
22802 cols#80, it#8, lines#24,
22803 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
22804 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
22805 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
22806 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
22807 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
22808 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
22809 1s\E\^9;1s\E\^27;1,
22812 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
22813 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
22814 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
22815 # mark and using delete-to-killbuffer work correctly. However, we would
22816 # like normal mode of operation to be using a Modgraph with 48 line setting.
22817 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
22818 # the setting mark and delete-to-killbuffer results in the deletion of only
22819 # the line the mark is set on.
22820 # We've discovered that the delete-to-killbuffer works correctly
22821 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
22822 # the first line disappears but a ctrl-l shows that it did work
22824 modgraph48|mod|Modgraph w/48 lines,
22825 OTbs, OTpt, am, xenl,
22826 cols#80, it#8, lines#48, vt#3,
22827 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
22828 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
22829 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22830 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
22831 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
22832 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
22833 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
22834 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22835 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
22836 smso=\E[7m, smul=\E[4m,
22838 #### Morrow Designs
22840 # This was George Morrow's company. They started in the late 1970s making
22841 # S100-bus machines. They used to be reachable at:
22844 # 600 McCormick St.
22845 # San Leandro, CA 94577
22847 # but they're long gone now (1995).
22850 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
22851 # Jeff's specimen was dated June 1984.
22852 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
22853 mt70|mt-70|Morrow MD-70; native Morrow mode,
22854 am, mir, msgr, xon,
22855 cols#80, it#8, lines#24,
22856 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
22857 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
22858 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
22859 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
22860 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
22861 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
22862 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
22863 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
22864 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
22865 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
22866 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
22867 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
22868 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
22869 smul=\EG1, tbc=\E0, use=adm+sgr,
22874 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
22876 ex155|Motorola Exorterm 155,
22878 OTkn#5, OTug#1, cols#80, lines#24,
22879 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
22880 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
22881 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
22882 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
22883 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
22887 # This company is still around in 1995, manufacturing point-of-sale systems.
22889 omron|Omron 8025AG,
22892 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
22893 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
22894 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
22898 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
22899 # were competition for things like the Tektronix 4025.
22902 # Ramtek 6221 from BRL, probably by Doug Gwyn
22903 # The following SET-UP modes are assumed for normal operation:
22904 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
22905 # NEWLINE_OFF 80_COLUMNS
22906 # Other SET-UP modes may be set for operator convenience or communication
22907 # requirements; I recommend
22908 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
22909 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
22910 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
22911 # Note that the Control-E key is useless on this brain-damaged terminal. No
22912 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
22913 rt6221|Ramtek 6221 80x24,
22914 OTbs, OTpt, msgr, xon,
22915 OTkn#4, cols#80, it#8, lines#24, vt#3,
22916 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
22917 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
22918 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
22919 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
22920 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
22921 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
22922 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22923 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
22924 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
22925 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
22926 rmso=\E[m, rmul=\E[m,
22927 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
22928 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
22930 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
22931 smul=\E[4m, tbc=\E[3g,
22932 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
22933 rt6221-w|Ramtek 6221 160x48,
22934 cols#160, lines#48,
22935 ll=\E[48;1H, use=rt6221,
22940 # RCA VP3301 or VP3501
22941 rca|rca vp3301/vp3501,
22944 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22945 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
22951 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
22952 # The following SET-UP modes are assumed for normal operation:
22953 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
22954 # ONLINE ANSI CURSOR_VISIBLE
22955 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
22956 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
22957 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
22958 # For use with graphics software, all graphics modes should be set to factory
22959 # default. Other SET-UP modes may be set for operator convenience or
22960 # communication requirements. No delays are specified; use "stty ixon -ixany"
22961 # to enable DC3/DC1 flow control!
22962 # I commented out the scrolling capabilities since they are too slow.
22963 hirez100|Selanar HiREZ-100,
22964 OTbs, OTpt, mir, msgr, xon,
22965 OTkn#4, cols#80, it#8, lines#48, vt#3,
22966 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
22967 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22968 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22969 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
22970 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22971 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
22972 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
22973 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
22974 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
22975 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
22976 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22977 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
22978 9l\E[r\E[m\E(B\017\E)0\E>,
22979 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
22980 smul=\E[4m, tbc=\E[3g,
22981 hirez100-w|Selanar HiREZ-100 in 132-column mode,
22982 cols#132, use=hirez100,
22987 # From University of Wisconsin
22988 vsc|Signetics Vsc Video driver by RMC,
22990 cols#80, it#8, lines#26,
22991 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
22992 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
22993 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
22994 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
22998 # Alan Frisbie <frisbie@flying-disk.com> writes:
23000 # As you may recall, the Soroc logo consisted of their name,
23001 # with the letter "S" superimposed over an odd design. This
23002 # consisted of a circle with a slightly smaller 15 degree (approx.)
23003 # wedge with rounded corners inside it. The color was sort of
23004 # a metallic gold/yellow.
23006 # If I had been more of a beer drinker it might have been obvious
23007 # to me, but it took a clue from their service department to make
23008 # me exclaim, "Of course!" The circular object was the top of
23009 # a beer can (the old removable pop-top style) and "Soroc" was an
23010 # anagram for "Coors".
23012 # I can just imagine the founders of the company sitting around
23013 # one evening, tossing back a few and trying to decide what to
23014 # call their new company and what to use for a logo.
23017 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
23018 soroc120|iq120|soroc|soroc iq120,
23019 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
23020 kcuf1=^L, kcuu1=^K, use=adm3a,
23021 soroc140|iq140|soroc iq140,
23024 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23025 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
23026 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
23027 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
23028 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
23029 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
23030 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
23032 #### Southwest Technical Products
23034 # These guys made an early personal micro called the M6800.
23035 # The ct82 was probably its console terminal.
23038 # (swtp: removed obsolete ":bc=^D:" -- esr)
23039 swtp|ct82|southwest technical products ct82,
23042 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
23043 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
23044 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
23045 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
23046 \017\035\027\022\011,
23047 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
23051 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
23053 # Synertek used to make ICs, various 6502-based single-board process
23054 # control and hobbyist computers, and assorted peripherals including a
23055 # series of small inexpensive terminals (I think they were one of the
23056 # first to have a "terminal-on-a-keyboard", where the terminal itself
23057 # was only slightly larger than the keyboard).
23059 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
23060 # was a 40x24 terminal that could connect to a standard TV through a
23061 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
23062 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
23063 # I have a KTM-2/80 still in working order. The KTM-2s had fully
23064 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
23065 # ROM and 2 ROMs as character generators. They were incredibly simple,
23066 # and I've never had any problems with mine (witness the fact that mine
23067 # was made in 1981 and is still working great... I've blown the video
23068 # output transistor a couple of times, but it's a 2N2222 :-)
23070 # The KTM-3 (which is what is listed in the terminfo file) was their
23071 # attempt at putting a KTM-2 in a box (and some models came with a
23072 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
23073 # control and escape sequences are very different. The KTM-3 was always
23074 # real broken, at least according to the folks I've talked to about it.
23076 # The padding in the entry is probably off--these terminals were very
23077 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
23078 # anyone with any sanity replaced the ROMs with something that provided
23079 # a reasonable subset of VT100 functionality, since the usual ROMs were
23080 # obviously very primitive... oh, you could get an upgraded ROM from
23081 # Synertek for some incredible amount of money, but what hacker with an
23082 # EPROM burner would do that? :)
23084 # Sorry I don't have any contact info; I believe they were located in
23085 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
23086 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
23087 # business these days.
23090 # Tested, seems to work fine with vi.
23091 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
23094 clear=^Z, cub1=^H, cuf1=^L,
23095 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23097 #### Tab Office Products
23099 # TAB Products Co. - Palo Alto, California
23100 # Electronic Office Products,
23101 # 1451 California Avenue 94304
23103 # I think they're out of business.
23106 # The tab 132 uses xon/xoff, so no padding needed.
23107 # <smkx>/<rmkx> have nothing to do with arrow keys.
23108 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
23109 # Seems to be no way to get rid of status line.
23110 # The manual for this puppy was dated June 1981. It claims to be VT52-
23111 # compatible but looks more vt100-like.
23112 tab132|tab|tab132-15|tab 132/15,
23114 OTdN@, cols#80, lines#24, lm#96,
23115 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
23116 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
23117 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
23119 tab132-w|tab132 in wide mode,
23121 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
23122 tab132-rv|tab132 in reverse-video mode,
23123 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
23124 tab132-w-rv|tab132 in reverse-video/wide mode,
23125 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
23130 # Research Incorporated
23131 # 6425 Flying Cloud Drive
23132 # Eden Prairie, MN 55344
23133 # Vox: (612)-941-3300
23135 # The Teleray terminals were all discontinued in 1992-93. RI still services
23136 # and repairs these beasts, but no longer manufactures them. The Teleray
23137 # people believe that all the types listed below are very rare now (1995).
23138 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
23139 # Model 100) that were ANSI-compatible.
23141 # Note two things called "teleray". Reorder should move the common one
23142 # to the front if you have either. A dumb teleray with the cursor stuck
23143 # on the bottom and no obvious model number is probably a 3700.
23146 t3700|dumb teleray 3700,
23149 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
23150 t3800|teleray 3800 series,
23152 cols#80, it#8, lines#24,
23153 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23154 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23155 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
23156 t1061|teleray|teleray 1061,
23157 OTbs, am, km, xhp, xt,
23158 cols#80, it#8, lines#24, xmc#1,
23159 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23160 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23161 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
23162 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
23163 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
23164 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
23165 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
23166 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
23168 t1061f|teleray 1061 with fast PROMs,
23169 dl1=\EM, il1=\EL, ip@, use=t1061,
23170 # "Teleray Arpa Special", officially designated as
23171 # "Teleray Arpa network model 10" with "Special feature 720".
23172 # This is the new (1981) fast microcode updating the older "arpa" proms
23173 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
23174 # converts the keypad to programmable function keys, and has other goodies.
23175 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
23176 # programs handle such lossage properly.
23177 # Note: this is NOT the old termcap's "t1061f with fast proms."
23178 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
23179 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
23180 t10|teleray 10 special,
23182 cols#80, it#8, lines#24, xmc#2,
23183 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
23184 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23185 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
23186 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
23188 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
23189 # back/forth words. Put the function keys (f1-f10) where they can be
23190 # found, and turn off the other magic keys along the top row, except
23191 # for line/local. Do the magic appropriate to make the page shifts work.
23192 # Also toggle ^S/^Q for those of us who use Emacs.
23194 am, da, db, mir, xhp, xt,
23196 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
23197 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
23198 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
23199 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
23200 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
23201 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
23202 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
23203 smso=\E[7m, smul=\E[4m,
23205 #### Texas Instruments (ti)
23208 # The Silent 700 was so called because it was built around a quiet thermal
23209 # printer. It was portable, equipped with an acoustic coupler, and pretty
23210 # neat for its day.
23211 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
23214 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
23216 # Terminal entries for the Texas Instruments 703/707
23217 # hardcopy terminals.
23219 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/
23221 # Model 707 Data Terminal User's Manual
23223 # pages 2-7 and 2-8 say that the model 707 prints 10.2 characters per inch
23224 # (cpi) (80 characters per line) by default, and can be switched to/from 17.0
23225 # cpi using an escape sequence. There is no 80/132-column capability in
23226 # terminfo (only the more general cpi which allows any value).
23227 ti703|ti707|Texas Instruments Silent 703/707,
23230 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, cuf1=\s, ind=\n,
23231 is2=\EPC\\, nel=\r\n,
23232 ti703-w|ti707-w|Texas Instruments Silent 703/707,
23234 is2=\EPD\\, use=ti703,
23237 # Texas Instruments 916 VDT 7 bit control mode
23239 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
23241 cbt=\E[Z, clear=\E[H\E[2J$<6>, cub=\E[%p1%dD,
23242 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH,
23243 cuu=\E[%p1%dA, dch=\E[%p1%dP$<250>, dch1=\E[P,
23244 dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
23245 el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
23246 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
23247 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
23248 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
23249 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
23250 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
23251 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
23252 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
23253 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
23256 # Texas Instruments 916 VDT 8 bit control mode
23258 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
23259 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
23260 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
23261 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
23262 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
23263 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
23264 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
23266 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
23268 ti916-132|Texas Instruments 916 VDT vt220 132 column,
23269 cols#132, use=ti916,
23271 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
23273 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
23274 cols#132, use=ti916-8,
23275 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
23277 cols#80, it#8, lines#24,
23278 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23279 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
23280 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
23281 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
23282 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23283 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
23284 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
23285 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
23286 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
23287 smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
23288 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
23290 cols#80, it#8, lines#24,
23291 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23292 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
23293 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
23294 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
23295 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23296 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
23297 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
23298 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
23299 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
23300 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
23301 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
23302 cols#132, use=ti924,
23303 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
23304 cols#132, use=ti924-8,
23305 ti931|Texas Instruments 931 VDT,
23308 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
23309 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
23310 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
23311 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
23312 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
23313 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
23314 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
23315 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
23316 sgr0=\E4@, smso=\E4A, smul=\E4D,
23317 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
23318 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
23319 # (ti926-8: I corrected this from the broken SCO entry -- esr)
23320 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
23321 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
23322 ti_ansi|basic entry for ti928,
23323 am, bce, eo, xenl, xon,
23324 colors#8, cols#80, it#8, lines#25, pairs#64,
23325 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
23326 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
23327 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
23328 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
23329 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23330 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
23331 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
23332 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
23333 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
23334 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
23335 smso=\E[7m, smul=\E[4m,
23337 # 928 VDT 7 bit control mode
23339 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
23340 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
23341 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
23342 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
23343 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
23344 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
23346 # 928 VDT 8 bit control mode
23348 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
23349 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
23350 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
23351 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
23352 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
23353 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
23354 kpp=\233T, kprt=\23335~, use=ti_ansi,
23359 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
23360 # had just <smso>=\EG6 which I think means standout was supposed to be
23361 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
23362 # <invis> might work-- esr)
23363 zen30|z30|zentec 30,
23366 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23367 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
23368 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
23369 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
23370 smul@, use=adm+sgr,
23371 # (zen50: this had extension capabilities
23372 # :BS=^U:CL=^V:CR=^B:
23373 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
23374 # which were also in the original entry -- esr)
23375 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
23376 zen50|z50|zentec zephyr,
23378 cols#80, lines#24, xmc#1,
23379 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
23380 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
23381 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
23382 rmul@, smul@, use=adm+sgr,
23384 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
23385 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
23388 blink=\EM", clear=\EH\EJ, cnorm=\EP,
23389 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
23390 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
23391 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
23392 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
23393 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
23394 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
23395 smso=\EM$, smul=\EM0,
23397 ######## OBSOLETE UNIX CONSOLES
23400 #### Apollo consoles
23402 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
23403 # labeled HP700s now.
23406 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
23407 apollo|apollo console,
23410 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
23411 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
23412 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
23413 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
23414 smso=\ES, smul=\EU, vpa=\EO+\s,
23416 # We don't know whether or not the apollo guys replicated DEC's firmware bug
23417 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
23418 # both these capabilities.
23419 apollo_15P|apollo 15 inch display,
23420 rmir@, smir@, use=vt132,
23421 apollo_19L|apollo 19 inch display,
23422 rmir@, smir@, use=vt132,
23423 apollo_color|apollo color display,
23424 rmir@, smir@, use=vt132,
23428 # This actually describes the generic SVr4 display driver for Intel boxes.
23429 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
23430 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
23431 att6386|at386|386at|AT&T WGS 6386 console,
23433 cols#80, it#8, lines#25,
23434 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
23435 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
23436 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
23437 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
23438 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
23439 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
23440 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
23441 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
23442 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m,
23443 is2=\E[0;10;39m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B,
23444 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP,
23445 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
23446 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
23447 khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0,
23448 nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m,
23449 rmso=\E[m, rmul=\E[m, sc=\E7,
23450 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
23451 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
23452 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
23453 tbc=\E[3g, vpa=\E[%i%p1%dd, use=ecma+index,
23455 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
23456 pc6300plus|AT&T 6300 plus,
23459 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
23460 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
23461 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
23462 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
23463 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
23464 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
23465 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
23466 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
23467 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23468 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
23470 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
23472 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
23473 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
23474 # is broken. All the special key sequences are broken, making it unusable
23475 # with Emacs. The problem stems from the following:
23477 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
23478 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
23479 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
23480 # uses resizable terminal windows, but the bundled terminal program always
23481 # uses an 80x24 window (and doesn't support seem to support a 132-column
23484 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
23485 # library which was a superset of SVr3.5 curses (called tam, for "terminal
23486 # access method".) tam includes support for real, overlapping windows,
23487 # onscreen function key labels, and bitmap graphics. But since the primary
23488 # user interface on the UNIX PC was a GUI program (ua, for "user
23489 # assistant",) and remote administration was considered important for the
23490 # machine, tam also supported VT100-compatible terminals attached to the
23491 # serial port or used across the StarLan network. To simulate the extra keys
23492 # not present on a VT100, users could press ESC and a two-letter sequence,
23493 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
23494 # however, were not the same as those sent by the actual Undo key. The
23495 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
23496 # (If you're interested in adding some of the tam calls to ncurses, btw, I
23497 # have the full documentation and several programs which use tam. It also
23498 # used an extended terminfo format to describe key sequences, special
23499 # highlighting modes, etc.)
23501 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
23502 # there are two sequences for every key-modifier combination (local keyboard
23503 # sequence and remote "VT100" sequence.) But I doubt many people are trying
23504 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
23505 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
23506 # seem to have been built from the manual describing the VT100 sequences.
23507 # This means it doesn't work for a real live UNIX PC.
23509 # FONTS: The UNIX PC also has a strange interpretation of "alternate
23510 # character set". Rather than the VT100 graphics you might expect, it allows
23511 # up to 8 custom fonts to be loaded at any given time. This means that
23512 # programs expecting VT100 graphics will usually be disappointed. For this
23513 # reason I have disabled the smacs/rmacs sequences, but they could easily be
23514 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
23515 # manpage), should you wish to do so:
23517 # SGR10 - Select font 0 - ESC [ 10 m or SO
23518 # SGR11 - Select font 1 - ESC [ 11 m or SI
23519 # SGR12 - Select font 2 - ESC [ 12 m
23521 # SGR17 - Select font 7 - ESC [ 17 m
23523 # Graphics for line drawing are not reliably found at *any* character
23524 # location because the UNIX PC has dynamically reloadable fonts. I use font
23525 # 0 for regular text and font 1 for italics, but this is by no means
23526 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
23528 # MISC: The cursor visible/cursor invisible sequences were swapped in the
23529 # distributed terminfo.
23531 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
23532 # the UNIX PC terminfo entry. The modified version works great with Lynx,
23533 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
23534 # attached by serial cable. In Emacs, even the Undo key works, and many
23535 # applications can now use the F1-F8 keys.
23538 # Terminfo entry for the AT&T Unix PC 7300
23539 # from escape(7) in Unix PC 7300 Manual.
23540 # Somewhat similar to a vt100-am (but different enough
23541 # to redo this from scratch.)
23543 # /***************************************************************
23545 # * FONT LOADING PROGRAM FOR THE UNIX PC
23547 # * This routine loads a font defined in the file ALTFONT
23548 # * into font memory slot #1. Once the font has been loaded,
23549 # * it can be used as an alternative character set.
23551 # * The call to ioctl with the argument WIOCLFONT is the key
23552 # * to this routine. For more information, see window(7) in
23553 # * the PC 7300 documentation.
23554 # ***************************************************************/
23555 # #include <string.h> /* needed for strcpy call */
23556 # #include <sys/window.h> /* needed for ioctl call */
23557 # #define FNSIZE 60 /* font name size */
23558 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
23560 # * The file /usr/lib/wfont/special.8.ft comes with the
23561 # * standard PC software. It defines a graphics character set
23562 # * similar to that of the Teletype 5425 terminal. To view
23563 # * this or other fonts in /usr/lib/wfont, use the command
23564 # * cfont <filename>. For further information on fonts see
23565 # * cfont(1) in the PC 7300 documentation.
23568 # struct altfdata /* structure for alt font data */
23570 # short altf_slot; /* memory slot number */
23571 # char altf_name[FNSIZE]; /* font name (file name) */
23575 # int wd; /* window in which altfont will be */
23576 # struct altfdata altf;
23577 # altf.altf_slot=1;
23578 # strcpy(altf.altf_name,ALTFONT);
23579 # for (wd =1; wd < 12; wd++) {
23580 # ioctl(wd, WIOCLFONT,&altf);
23584 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
23585 # they're confirmed by the man page for the System V display---esr)
23587 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
23589 cols#80, it#8, lines#24,
23590 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
23591 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
23592 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
23593 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
23594 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
23595 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
23596 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
23597 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
23598 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
23599 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
23600 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
23601 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
23602 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
23603 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
23604 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
23605 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
23606 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
23607 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
23608 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
23609 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
23610 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
23611 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
23614 #### Convergent Technology
23616 # Burroughs bought Convergent shortly before it merged with Univac.
23617 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
23618 # from 1991 or earlier).
23621 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
23622 # (aws: removed unknown :dn=^K: -- esr)
23623 aws|Convergent Technologies AWS workstation under UTX and Xenix,
23625 OTug#0, cols#80, lines#28, xmc#0,
23626 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
23627 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
23628 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
23629 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
23630 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
23631 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
23633 awsc|Convergent Technologies AWS workstation under CTOS,
23635 OTug#0, cols#80, lines#24, xmc#0,
23636 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
23637 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
23638 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
23639 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
23645 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
23646 # The digital uVax II's had a graphic display called a qdss. It was
23647 # supposed to be a high performance graphic accelerator, but it was
23648 # late to market and barely appeared before faster dumb frame buffers
23649 # appeared. I have only used this display while running X11. However,
23650 # during bootup, it was in text mode, and probably had a terminal emulator
23651 # within it. And that is what your termcap entry is for. In graphics
23652 # mode the screen size is 1024x864 pixels.
23653 qdss|qdcons|qdss glass tty,
23655 cols#128, lines#57,
23656 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
23657 cup=\E=%p1%c%p2%c, cuu1=^K,
23659 #### Fortune Systems consoles
23661 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
23662 # in their day; I (esr) used one myself for a year or so around 1984.
23663 # They had no graphics, though, and couldn't compete against Suns and
23667 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
23668 # (This had extension capabilities
23669 # :rv=\EH:re=\EI:rg=0:GG=0:\
23670 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
23671 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
23672 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
23673 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
23674 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
23675 # to force both magic cookie glitches off. Once upon a time, I
23676 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
23677 # function keys; thus the "Al" value for HM was certainly an error. I renamed
23678 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
23679 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
23680 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
23681 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
23682 fos|fortune|Fortune system,
23685 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
23686 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
23687 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
23688 cvvis=\E:, dch1=\034W$<5>, dl1=\034R$<15>, ed=\034Y$<3*>,
23689 el=^\Z, home=\036$<10>, ht=^Z, ich1=\034Q$<5>,
23690 il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H, kcub1=^Aw\r,
23691 kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, kend=^Ak\r,
23692 kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, kf4=^Ad\r,
23693 kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, khome=^A?\r,
23694 knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH, rmacs=^O, rmso=^\I`,
23695 rmul=^\IP, sgr0=\EI, smacs=\Eo, smso=^\H`, smul=^\HP,
23697 #### Masscomp consoles
23699 # Masscomp has gone out of business. Their product line was purchased by a
23700 # company in Georgia (US) called "XS International", parts and service may
23701 # still be available through them.
23704 # (masscomp: ":MT:" changed to ":km:"; -- esr)
23705 masscomp|masscomp workstation console,
23707 cols#80, it#8, lines#24,
23708 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
23709 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23710 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
23711 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
23712 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
23713 masscomp1|masscomp large screen version 1,
23714 cols#104, lines#36, use=masscomp,
23715 masscomp2|masscomp large screen version 2,
23716 cols#64, lines#21, use=masscomp,
23721 # OSF/1 1.1 Snapshot 2
23722 pmcons|pmconsole|PMAX console,
23724 cols#128, lines#57,
23725 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
23726 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
23727 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
23729 #### Other consoles
23730 # The following is a version of the ibm-pc entry distributed with PC/IX,
23731 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
23732 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
23733 # (the former is untrue, and the latter failed under UCB/man); standout and
23734 # underline modes have been added. Note: this entry describes the "native"
23735 # capabilities of the PC monochrome display, without ANY emulation; most
23736 # communications packages (but NOT PC/IX connect) do some kind of emulation.
23737 pcix|PC/IX console,
23740 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
23741 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
23742 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
23745 # (ibmpcx: this entry used to be known as ibmx.
23746 # It formerly included the following extension capabilities:
23747 # :GC=b:GL=v:GR=t:RT=^J:\
23748 # :GH=\E[196g:GV=\E[179g:\
23749 # :GU=\E[193g:GD=\E[194g:\
23750 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
23751 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
23752 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
23753 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
23754 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
23755 # what was there before. -- esr)
23756 ibmpcx|xenix|ibmx|IBM PC xenix console display,
23759 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
23760 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23761 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
23762 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
23763 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
23764 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
23766 ######## OTHER OBSOLETE TYPES
23768 # These terminals are *long* dead -- these entries are retained for
23769 # historical interest only.
23772 #### Obsolete non-ANSI software emulations
23775 # CTRM terminal emulator
23776 # 1. underlining is not allowed with colors: first, is is simulated by
23777 # black on white, second, it disables background color manipulations.
23778 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
23779 # so we have to save their status in the static registers A, B and H
23780 # respectively, to be able to restore them when color changes
23781 # (because any color change turns off ALL attributes)
23782 # 3. <bold> and <rev> sequences alternate modes,
23783 # rather than simply entering them. Thus we have to check the
23784 # static register B and H to determine the status, before sending the
23786 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
23787 # and then reset colors
23788 # 5. implementation of the protect mode would badly penalize the performance.
23789 # we would have to use \E&bn sequence to turn off colors (as well as all
23790 # other attributes), and keep the status of protect mode in yet another
23791 # static variable. If someone really needs this mode, they would have to
23792 # create another terminfo entry.
23793 # 6. original color-pair is white on black.
23794 # store the information about colors into static registers
23795 # 7. set foreground color. it performs the following steps.
23796 # 1) turn off all attributes
23797 # 2) turn on the background and video attributes that have been turned
23798 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
23799 # 3) turn on foreground attributes
23800 # 4) store information about foreground into U,V,W static registers
23801 # 8. turn on background: similar to turn on foreground above
23802 ctrm|C terminal emulator,
23804 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
23805 pairs#63, pb#19200, vt#6,
23806 bel=^G, blink=\E&dA%{1}%PA,
23807 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
23808 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23809 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
23810 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
23811 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
23812 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
23813 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
23814 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
23815 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
23817 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
23818 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
23819 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
23820 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
23821 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
23822 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
23823 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
23824 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
23825 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
23826 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
23827 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
23829 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
23830 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
23832 # gs6300 - can't use blue foreground, it clashes with underline;
23833 # it's simulated with cyan
23834 # Bug: The <op> capability probably resets attributes.
23835 # (gs6300: commented out <rmln> (no <smln>) --esr)
23836 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
23837 am, bce, msgr, xon,
23838 colors#8, cols#80, it#8, lines#24, pairs#63,
23839 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
23841 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
23842 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
23843 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
23844 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
23845 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
23846 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
23847 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
23848 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
23849 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
23850 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
23851 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
23852 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
23853 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
23855 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
23856 # MS-Kermit with Heath-19 emulation mode enabled
23857 # (h19k: changed ":pt@:" to ":it@"
23858 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
23863 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
23864 # Software (formerly Peripherals Computers & Supplies, Inc) of
23865 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
23866 # also be reached at support@synergy.com.
23867 versaterm|versaterm vt100 emulator for the Macintosh,
23869 cols#80, it#8, lines#24,
23870 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
23871 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
23872 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
23873 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
23874 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
23875 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
23876 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
23877 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
23878 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
23879 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
23880 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
23881 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
23884 # From: Rick Thomas <ihnp4!btlunix!rbt>
23885 # (xtalk: I added <rmam>/<smam> based on the init string.
23886 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
23887 am, mir, msgr, xon,
23888 cols#80, it#8, lines#24, vt#3, xmc#1,
23889 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
23890 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
23891 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
23892 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
23893 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
23894 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
23895 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
23896 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
23897 rmkx=\E[?1l\E>, rmso=\E[m\s,
23898 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
23899 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
23900 tbc=\E[3g, use=vt100+fnkeys,
23902 # The official PC terminal emulator program of the AT&T Product Centers.
23903 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
23904 simterm|attpc running simterm,
23907 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
23908 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
23909 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
23910 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
23912 #### Daisy wheel printers
23914 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
23915 # wheel terminals. These are now largely obsolete.
23918 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
23919 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
23922 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
23923 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
23924 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
23926 is2=\r \E9, use=diablo1620,
23927 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
23928 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
23929 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
23931 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
23933 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
23935 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
23936 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
23938 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
23939 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
23940 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
23941 # If no tab is set or the terminal's in a bad mood, it glitches the screen
23942 # around all of memory. Note that return puts a blank ("a return character")
23943 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
23944 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
23945 # curses won't work (some old BSD versions) because it doesn't clear this bit,
23946 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
23947 # I have been unable to get tabs set in all 96 lines - it always leaves at
23948 # least one line with no tabs in it, and once you tab through that line,
23949 # it completely weirds out.
23950 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
23953 cols#80, lines#24, lm#96,
23954 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
23955 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
23956 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
23957 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
23958 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
23962 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
23963 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
23964 gsi|mystery gsi terminal,
23967 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
23969 aj830|aj832|aj|anderson jacobson,
23971 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
23973 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
23974 aj510|Anderson-Jacobson model 510,
23977 clear=^L, cub1=^H, cuf1=\EX,
23978 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
23979 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
23980 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
23981 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
23982 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
23984 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
23985 # This is incomplete, but it's a start.
23986 nec5520|nec|spinwriter|nec 5520,
23989 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
23990 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
23992 qume5|qume|Qume Sprint 5,
23995 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
23996 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
23997 # I suspect the xerox 1720 is the same as the diablo 1620.
23998 xerox1720|x1720|x1750|xerox 1720,
24001 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
24004 #### Miscellaneous obsolete terminals, manufacturers unknown
24006 # If you have any information about these (like, a manufacturer's name,
24007 # and a date on the serial-number plate) please send it!
24009 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
24012 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
24013 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
24016 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
24017 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
24018 kf4=\E8, rmso=\Em^C, smso=\Em^L,
24019 cops10|cops|cops-10|cops 10,
24022 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
24023 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
24024 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
24026 # (d132: removed duplicate :ic=\E5:,
24027 # merged in capabilities from a BRL entry -- esr)
24028 d132|datagraphix|datagraphix 132a,
24031 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
24032 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
24033 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
24034 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
24035 # The d800 was an early portable terminal from c.1984-85 that looked a lot
24036 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
24037 # mode (which is what this entry looks like) and several other lesser-known
24040 OTbs, am, da, db, msgr, xhp,
24041 cols#80, it#8, lines#24,
24042 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
24043 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
24044 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
24045 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
24046 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
24047 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
24048 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24049 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
24050 digilog|digilog 333,
24053 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
24055 # The DWK was a terminal manufactured in the Soviet Union c.1986
24056 dwk|dwk-vt|dwk terminal,
24058 cols#80, it#8, lines#24,
24059 acsc=+\^\,Q-S.M0\177`+a:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~
24061 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
24062 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
24063 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
24064 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
24065 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
24066 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
24067 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
24068 sgr0=\EX, smacs=\EF, smso=\ET,
24069 env230|envision230|envision 230 graphics terminal,
24071 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
24072 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
24074 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
24075 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
24076 # coupler attached, the whole rig fitting in a suitcase and more or less
24077 # portable. Hot stuff for c.1977 :-) -- esr
24078 ep48|ep4080|execuport 4080,
24081 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
24082 ep40|ep4000|execuport 4000,
24083 cols#136, use=ep4080,
24084 # Adam Thompson <athompso@pangea.ca> tells us:
24085 # Informer series - these are all portable units, resembling older
24086 # automatic bread-baking machines. The terminal looks like a `clamshell'
24087 # design, but isn't. The structure is similar to the Direct terminals,
24088 # but only half the width. The entire unit is only about 10" wide.
24089 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
24090 # keyboard. All the keys are crammed together, much like some laptop
24091 # PCs today, but perhaps less well organized...all these units have a
24092 # bewildering array of plugs on the back, including a built-in modem.
24093 # The 305 was a color version of the 304; the 306 and 307 were mono and
24094 # color terminals built for IBM bisync protocols.
24095 # From: Paul Leondis <unllab@amber.berkeley.edu>
24096 ifmr|Informer D304,
24099 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
24100 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
24101 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
24103 # Entry largely based on wy60 and has the features of wy60ak.
24104 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
24105 am, bw, hs, km, mir, msgr, ul, xon,
24106 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
24107 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
24108 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
24109 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
24110 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
24111 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
24112 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
24114 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
24115 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
24117 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
24118 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
24119 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
24120 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
24121 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
24122 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
24123 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
24124 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
24125 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
24126 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
24127 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
24128 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
24129 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
24130 rs3=\EwG\Ee($<150>,
24131 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
24132 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
24133 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
24134 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
24135 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
24137 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
24138 uc=\EG8\EG0, use=adm+sgr,
24139 teletec|Teletec Datascreen,
24142 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
24144 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
24145 # This description is for the LANPAR Technologies VISION 3220
24146 # terminal from 1984/85. The function key definitions k0-k5 represent the
24147 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
24148 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
24150 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
24151 # I had a couple of scopes (3221) like this once where I used to work, around
24152 # the 1987 time frame if memory serves me correctly. These scopes were made
24153 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
24154 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
24155 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
24156 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
24157 # (3221) cost about $1500 each, and one was always broken -- had to be sent
24158 # back to the shop for repairs.
24159 # The only real advantage these scopes had over the VT-240's were:
24160 # 1) They were faster in the Regis display, or at least the ones I did
24161 # 2) They had a handy debugging feature where you could split-screen the
24162 # scope, the graphics would appear on the top, and the REGIS commands would
24163 # appear on the bottom. I don't remember the VT-240s being able to do that.
24164 # I would swear that LANPAR Technologies was in MA someplace, but since I
24165 # don't work at the same place anymore, and those terminals and manuals were
24166 # long since junked, I cannot be any more sure than that.
24168 # (v3220: removed obsolete ":kn#10:",
24169 # I added <rmam>/<smam> based on the init string -- esr)
24170 v3220|LANPAR Vision II model 3220/3221/3222,
24171 OTbs, am, mir, xenl,
24172 cols#80, it#8, lines#24,
24173 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
24174 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
24175 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
24176 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
24177 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
24178 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
24179 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
24180 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24181 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
24182 ######## ICH/ICH1 VERSUS RMIR/SMIR
24184 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
24185 # are present; the symptom is doubled characters in an update using insert.
24186 # These applications are technically correct; in both 4.3BSD termcap and
24187 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
24188 # unless the terminal needs both. To my knowledge, no terminal still in this
24189 # file requires both other than the very obsolete dm2500.
24191 # For ncurses-based applications this is not a problem, as ncurses uses
24192 # one or the other as appropriate but never mixes the two. Therefore we
24193 # have not corrected entries like `linux' and `xterm' that specify both.
24194 # If you see doubled characters from these, use the linux-nic and xterm-nic
24195 # entries that suppress ich/ich1. And upgrade to ncurses!
24198 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
24200 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
24201 # ECMA-48 standards are said to be almost identical, but are not the same
24202 # as X3.64 (though for practical purposes they are close supersets of it).
24204 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
24205 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
24206 # Coded Character Sets"), include your snail-mail address, and you should
24207 # receive the document in due course. Don't expect an email acknowledgment.
24209 # Related standards include "X3.4-1977: American National Standard Code for
24210 # Information Interchange" (the ASCII standard) and "X3.41.1974:
24211 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
24212 # American National Standard for Information Interchange." I believe (but
24213 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
24217 #### VT100/ANSI/ECMA-48
24219 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
24220 # and ECMA-48 Control Functions for Coded Character Sets.
24222 # Much of the content of this comment is adapted from a table prepared by
24223 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
24224 # discussion of some terminfo-related issues, and updates to capture ECMA-48
24225 # have been added. Control functions described in ECMA-48 only are tagged
24226 # with * after their names.
24228 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
24229 # sequences. In the main table, \E stands for an escape (\033) character,
24230 # SPC for space. Pn stands for a single numeric parameter to be inserted
24231 # in decimal ASCII. Ps stands for a list of such parameters separated by
24232 # semicolons. Parameter meanings for most parameterized sequences are
24233 # described in the notes.
24235 # Sequence Sequence Parameter or
24236 # Mnemonic Name Sequence Value Mode terminfo
24237 # -----------------------------------------------------------------------------
24238 # APC Applicatn Program Command \E _ - Delim -
24239 # BEL Bell * ^G - - bel
24240 # BPH Break Permitted Here * \E B - * -
24241 # BS BackSpace * ^H - EF -
24242 # CAN Cancel * ^X - - - (A)
24243 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
24244 # CCH Cancel Previous Character \E T - - -
24245 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
24246 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
24247 # CMD Coding Method Delimiter * \E
24248 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
24249 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
24250 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
24251 # CSI Control Sequence Intro \E [ - Intro -
24252 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
24253 # CUB Cursor Backward \E [ Pn D 1 eF cub
24254 # CUD Cursor Down \E [ Pn B 1 eF cud
24255 # CUF Cursor Forward \E [ Pn C 1 eF cuf
24256 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
24257 # CUU Cursor Up \E [ Pn A 1 eF cuu
24258 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
24259 # DA Device Attributes \E [ Pn c 0 - -
24260 # DAQ Define Area Qualification \E [ Ps o 0 - -
24261 # DCH Delete Character \E [ Pn P 1 eF dch
24262 # DCS Device Control String \E P - Delim -
24263 # DL Delete Line \E [ Pn M 1 eF dl
24264 # DLE Data Link Escape * ^P - - -
24265 # DMI Disable Manual Input \E \ - Fs -
24266 # DSR Device Status Report \E [ Ps n 0 - - (I)
24267 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
24268 # EA Erase in Area \E [ Ps O 0 eF - (J)
24269 # ECH Erase Character \E [ Pn X 1 eF ech
24270 # ED Erase in Display \E [ Ps J 0 eF ed (J)
24271 # EF Erase in Field \E [ Ps N 0 eF -
24272 # EL Erase in Line \E [ Ps K 0 eF el (J)
24273 # EM End of Medium * ^Y - - -
24274 # EMI Enable Manual Input \E b Fs -
24275 # ENQ Enquire ^E - - -
24276 # EOT End Of Transmission ^D - * -
24277 # EPA End of Protected Area \E W - - - (K)
24278 # ESA End of Selected Area \E G - - -
24279 # ESC Escape ^[ - - -
24280 # ETB End Transmission Block ^W - - -
24281 # ETX End of Text ^C - - -
24282 # FF Form Feed ^L - - -
24283 # FNK Function Key * \E [ Pn SPC W - - -
24284 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
24285 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
24286 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
24287 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
24288 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
24289 # HPB Char Position Backward \E [ j 1 FE -
24290 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
24291 # HT Horizontal Tab * ^I - FE - (N)
24292 # HTJ Horz Tab w/Justification \E I - FE -
24293 # HTS Horizontal Tab Set \E H - FE hts
24294 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
24295 # ICH Insert Character \E [ Pn @ 1 eF ich
24296 # IDCS ID Device Control String \E [ SPC O - * -
24297 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
24298 # IL Insert Line \E [ Pn L 1 eF il
24299 # IND Index \E D - FE -
24300 # INT Interrupt \E a - Fs -
24301 # JFY Justify \E [ Ps SPC F 0 FE -
24302 # IS1 Info Separator #1 * ^_ - * -
24303 # IS2 Info Separator #1 * ^^ - * -
24304 # IS3 Info Separator #1 * ^] - * -
24305 # IS4 Info Separator #1 * ^\ - * -
24306 # LF Line Feed ^J - - -
24307 # LS1R Locking Shift Right 1 * \E ~ - - -
24308 # LS2 Locking Shift 2 * \E n - - -
24309 # LS2R Locking Shift Right 2 * \E } - - -
24310 # LS3 Locking Shift 3 * \E o - - -
24311 # LS3R Locking Shift Right 3 * \E | - - -
24312 # MC Media Copy \E [ Ps i 0 - - (S)
24313 # MW Message Waiting \E U - - -
24314 # NAK Negative Acknowledge * ^U - * -
24315 # NBH No Break Here * \E C - - -
24316 # NEL Next Line \E E - FE nel (D)
24317 # NP Next Page \E [ Pn U 1 eF -
24318 # NUL Null * ^@ - - -
24319 # OSC Operating System Command \E ] - Delim -
24320 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
24321 # PFS Page Format Selection * \E Pn SPC J 0 - -
24322 # PLD Partial Line Down \E K - FE - (T)
24323 # PLU Partial Line Up \E L - FE - (U)
24324 # PM Privacy Message \E ^ - Delim -
24325 # PP Preceding Page \E [ Pn V 1 eF -
24326 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
24327 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
24328 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
24329 # PTX Parallel Texts * \E [ \ - - -
24330 # PU1 Private Use 1 \E Q - - -
24331 # PU2 Private Use 2 \E R - - -
24332 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
24333 # REP Repeat Char or Control \E [ Pn b 1 - rep
24334 # RI Reverse Index \E M - FE - (V)
24335 # RIS Reset to Initial State \E c - Fs -
24336 # RM Reset Mode * \E [ Ps l - - - (W)
24337 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
24338 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
24339 # SCI Single-Char Introducer \E Z - - -
24340 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
24341 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
24342 # SD Scroll Down \E [ Pn T 1 eF rin
24343 # SDS Start Directed String * \E [ Pn ] 1 - -
24344 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
24345 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
24346 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
24347 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
24348 # SI Shift In ^O - - - (P)
24349 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
24350 # SL Scroll Left \E [ Pn SPC @ 1 eF -
24351 # SLH Set Line Home * \E [ Pn SPC U - - -
24352 # SLL Set Line Limit * \E [ Pn SPC V - - -
24353 # SLS Set Line Spacing * \E [ Pn SPC h - - -
24354 # SM Select Mode \E [ Ps h none - - (W)
24355 # SO Shift Out ^N - - - (Q)
24356 # SOH Start Of Heading * ^A - - -
24357 # SOS Start of String * \E X - - -
24358 # SPA Start of Protected Area \E V - - - (Z)
24359 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
24360 # SPH Set Page Home * \E [ Ps SPC G - - -
24361 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
24362 # SPL Set Page Limit * \E [ Ps SPC j - - -
24363 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
24364 # SR Scroll Right \E [ Pn SPC A 1 eF -
24365 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
24366 # SRS Start Reversed String * \E [ Ps [ 0 - -
24367 # SSA Start of Selected Area \E F - - -
24368 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
24369 # SSW Set Space Width * \E [ Pn SPC [ none - -
24370 # SS2 Single Shift 2 (G2 set) \E N - Intro -
24371 # SS3 Single Shift 3 (G3 set) \E O - Intro -
24372 # ST String Terminator \E \ - Delim -
24373 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
24374 # STS Set Transmit State \E S - - -
24375 # STX Start pf Text * ^B - - -
24376 # SU Scroll Up \E [ Pn S 1 eF indn
24377 # SUB Substitute * ^Z - - -
24378 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
24379 # SYN Synchronous Idle * ^F - - -
24380 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
24381 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
24382 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
24383 # TBC Tab Clear \E [ Ps g 0 FE tbc
24384 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
24385 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
24386 # TSS Thin Space Specification \E [ Pn SC E none FE -
24387 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
24388 # VPB Line Position Backward * \E [ Pn k 1 FE -
24389 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
24390 # VT Vertical Tabulation * ^K - FE -
24391 # VTS Vertical Tabulation Set \E J - FE -
24393 # ---------------------------------------------------------------------------
24397 # Some control characters are listed in the ECMA-48 standard without
24398 # being assigned functions relevant to terminal control there (they
24399 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
24400 # here anyway for completeness.
24402 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
24404 # (B) There seems to be some confusion abroad between CHA and HPA. Most
24405 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
24406 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
24407 # preserved the CHA abbreviation.
24409 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
24410 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
24411 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
24412 # CHT abbreviation.
24414 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
24416 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
24419 # (F) CTC parameter values:
24420 # 0 = set char tab,
24421 # 1 = set line tab,
24422 # 2 = clear char tab,
24423 # 3 = clear line tab,
24424 # 4 = clear all char tabs on current line,
24425 # 5 = clear all char tabs,
24426 # 6 = clear all line tabs.
24428 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
24429 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
24430 # Position Absolute" but retains the HVP abbreviation.
24432 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
24435 # (I) DSR parameter values:
24438 # 2 = busy, will send DSR later,
24440 # 4 = malfunction, will send DSR later,
24442 # 6 = request CPR response.
24444 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
24445 # 0 = clear to end,
24446 # 1 = clear from beginning,
24449 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
24451 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
24453 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
24454 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
24455 # Position Relative" but retains the HPR abbreviation.
24457 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
24460 # (O) SGR parameter values:
24461 # 0 = default mode (attributes off),
24468 # 7 = reverse video,
24470 # 9 = crossed-out (marked for deletion),
24471 # 10 = primary font,
24472 # 10 + n (n in 1..9) = nth alternative font,
24474 # 21 = double underline,
24479 # 26 = proportional spacing,
24491 # 38 = set fg color as in CCITT T.416,
24492 # 39 = set default fg color,
24501 # 48 = set bg color as in CCITT T.416,
24502 # 49 = set default bg color,
24503 # 50 = turn off 26,
24507 # 54 = turn off 51 & 52,
24508 # 55 = not overlined,
24509 # 56-59 = reserved,
24510 # 61-65 = variable highlights for ideograms.
24512 # (P) SI is also called LSO, Locking Shift Zero.
24514 # (Q) SI is also called LS1, Locking Shift One.
24516 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
24517 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
24518 # Absolute' but retains the VPA abbreviation.
24520 # (S) MC parameters:
24521 # 0 = start xfer to primary aux device,
24522 # 1 = start xfer from primary aux device,
24523 # 2 = start xfer to secondary aux device,
24524 # 3 = start xfer from secondary aux device,
24525 # 4 = stop relay to primary aux device,
24526 # 5 = start relay to primary aux device,
24527 # 6 = stop relay to secondary aux device,
24528 # 7 = start relay to secondary aux device.
24530 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
24533 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
24536 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
24538 # (W) RM/SM modes are as follows:
24539 # 1 = Guarded Area Transfer Mode (GATM),
24540 # 2 = Keyboard Action Mode (KAM),
24541 # 3 = Control Representation Mode (CRM),
24542 # 4 = Insertion Replacement Mode (IRM),
24543 # 5 = Status Report Transfer Mode (SRTM),
24544 # 6 = Erasure Mode (ERM),
24545 # 7 = Line Editing Mode (LEM),
24546 # 8 = Bi-Directional Support Mode (BDSM),
24547 # 9 = Device Component Select Mode (DCSM),
24548 # 10 = Character Editing Mode (HEM),
24549 # 11 = Positioning Unit Mode (PUM),
24550 # 12 = Send/Receive Mode (SRM),
24551 # 13 = Format Effector Action Mode (FEAM),
24552 # 14 = Format Effector Transfer Mode (FETM),
24553 # 15 = Multiple Area Transfer Mode (MATM),
24554 # 16 = Transfer Termination Mode (TTM),
24555 # 17 = Selected Area Transfer Mode (SATM),
24556 # 18 = Tabulation Stop Mode (TSM),
24557 # 19 = Editing Boundary Mode (EBM),
24558 # 20 = Line Feed New Line Mode (LF/NL),
24559 # 21 = Graphic Rendition Combination Mode (GRCM),
24560 # 22 = Zero Default Mode (ZDM).
24562 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
24563 # but are listed here for reference.
24565 # (X) Select Alternate Presentation Variants is used only for non-Latin
24568 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
24570 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
24573 # ---------------------------------------------------------------------------
24577 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
24578 # X3.64 Control Sequence Introducer is the two characters "Escape ["
24580 # Delim a Delimiter
24582 # x/y identifies a character by position in the ASCII table (column/row)
24584 # eF editor function (see explanation)
24586 # FE format effector (see explanation)
24588 # F is a Final character in
24589 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
24590 # a control sequence (F from 4/0 to 7/14)
24592 # Gs is a graphic character appearing in strings (Gs ranges from
24593 # 2/0 to 7/14) in the ASCII table
24595 # Ce is a control represented as a single bit combination in the C1 set
24596 # of controls in an 8-bit character set
24598 # C0 the familiar set of 7-bit ASCII control characters
24600 # C1 roughly, the set of control chars available only in 8-bit systems.
24601 # This is too complicated to explain fully here, so read Jim Fleming's
24602 # article in the February 1983 BYTE, especially pages 214 through 224.
24604 # Fe is a Final character of a 2-character Escape sequence that has an
24605 # equivalent representation in an 8-bit environment as a Ce-type
24606 # (Fe ranges from 4/0 to 5/15)
24608 # Fs is a Final character of a 2-character Escape sequence that is
24609 # standardized internationally with identical representation in 7-bit
24610 # and 8-bit environments and is independent of the currently
24611 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
24613 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
24616 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
24619 # Pn is a numeric parameter in a control sequence, a string of zero or
24620 # more characters ranging from 3/0 to 3/9 in the ASCII table
24622 # Ps is a variable number of selective parameters in a control sequence
24623 # with each selective parameter separated from the other by the code
24624 # 3/11 (which usually represents a semicolon); Ps ranges from
24625 # 3/0 to 3/9 and includes 3/11
24627 # * Not relevant to terminal control, listed for completeness only.
24629 # Format Effectors versus Editor Functions
24631 # A format effector specifies how following output is to be displayed.
24632 # An editor function allows you to modify the display. Informally
24633 # format effectors may be destructive; format effectors should not be.
24635 # For instance, a format effector that moves the "active position" (the
24636 # cursor or equivalent) one space to the left would be useful when you want to
24637 # create an overstrike, a compound character made of two standard characters
24638 # overlaid. Control-H, the Backspace character, is actually supposed to be a
24639 # format effector, so you can do this. But many systems use it in a
24640 # nonstandard fashion, as an editor function, deleting the character to the
24641 # left of the cursor and moving the cursor left. When Control-H is assumed to
24642 # be an editor function, you cannot predict whether its use will create an
24643 # overstrike unless you also know whether the output device is in an "insert
24644 # mode" or an "overwrite mode". When Control-H is used as a format effector,
24645 # its effect can always be predicted. The familiar characters carriage
24646 # return, linefeed, formfeed, etc., are defined as format effectors.
24648 # NOTES ON THE DEC VT100 IMPLEMENTATION
24650 # Control sequences implemented in the VT100 are as follows:
24652 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
24653 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
24655 # plus several private DEC commands.
24657 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
24659 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
24660 # Erase from beginning of line to cursor Esc [ 1 K
24661 # Erase line containing cursor Esc [ 2 K
24662 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
24663 # Erase from beginning of screen to cursor Esc [ 1 J
24664 # Erase entire screen Esc [ 2 J
24666 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
24667 # Esc [ 2 J, but this is wrong; the default is 0.
24669 # The VT100 responds to receiving the DA (Device Attributes) control
24671 # Esc [ c (or Esc [ 0 c)
24673 # by transmitting the sequence
24677 # where Ps is a character that describes installed options.
24679 # The VT100's cursor location can be read with the DSR (Device Status
24684 # The VT100 reports by transmitting the CPR sequence
24688 # where Pl is the line number and Pc is the column number (in decimal).
24690 # The specification for the DEC VT100 is document EK-VT100-UG-003.
24694 # Here is a description of the color and attribute controls supported in the
24695 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
24696 # terminal emulators for Intel boxes obey these. They are a proper subset
24697 # of the ECMA-48 escapes.
24699 # 0 all attributes off
24700 # 1 foreground bright
24702 # 5 blink on/background bright (not reliable with brown)
24704 # 8 set blank (non-display)
24705 # 10 set primary font
24706 # 11 set first alternate font (on PCs, display ROM characters 1-31)
24707 # 12 set second alternate font (on PCs, display IBM high-half chars)
24709 # Color attribute sets
24710 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
24711 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
24712 # Bright black becomes gray. Bright brown becomes yellow,
24713 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
24715 # * If the 5 attribute is on and you set a background color (40-47) it is
24716 # supposed to enable bright background.
24718 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
24719 # when you try to set a "bright brown" (yellow) background with attribute
24720 # 5 (you get a blinking yellow foreground instead). A few displays
24721 # (including the System V console) support an attribute 6 that undoes this
24722 # braindamage (this is required by iBCS2).
24724 # * Some older versions of ANSI.SYS have a bug that causes them to require
24725 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
24728 #### Intel Binary Compatibility Standard
24730 # For comparison, here are the capabilities implied by the Intel Binary
24731 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
24732 # These recommendations are optional. IBCS2 allows the leading escape to
24733 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
24734 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
24735 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
24736 # terminfo entry are followed with the corresponding capability in parens:
24738 # CSI <n>k disable (n=0) or enable (n=1) keyclick
24739 # CSI 2h lock keyboard
24740 # CSI 2i send screen as input
24741 # CSI 2l unlock keyboard
24742 # CSI 6m enable background color intensity
24743 # CSI <0-2>c reserved
24744 # CSI <0-59>m select graphic rendition
24745 # CSI <n>;<m>H (cup) cursor to line n and column m
24746 # CSI <n>;<m>f cursor to line n and column m
24747 # CSI <n>@ (ich) insert characters
24748 # CSI <n>A (cuu) cursor up n lines
24749 # CSI <n>B (cud) cursor down n lines
24750 # CSI <n>C (cuu) cursor right n characters
24751 # CSI <n>D (cud) cursor left n characters
24752 # CSI <n>E cursor down n lines and in first column
24753 # CSI <n>F cursor up n lines and in first column
24754 # CSI <n>G (hpa) position cursor at column n-1
24755 # CSI <n>J (ed) erase in display
24756 # CSI <n>K (el) erase in line
24757 # CSI <n>L (il) insert line(s)
24758 # CSI <n>P (dch) delete characters
24759 # CSI <n>S (indn) scroll up n lines
24760 # CSI <n>T (rin) scroll down n lines
24761 # CSI <n>X (ech) erase characters
24762 # CSI <n>Z (cbt) back up n tab stops
24763 # CSI <n>` cursor to column n on line
24764 # CSI <n>a (cuu) cursor right n characters
24765 # CSI <n>d (vpa) cursor to line n
24766 # CSI <n>e cursor down n lines and in first column
24767 # CSI <n>g (cbt) clear all tabs
24768 # CSI <n>z make virtual terminal n active
24769 # CSI ?7h (smam) turn automargin on
24770 # CSI ?7l (rmam) turn automargin off
24771 # CSI s save cursor position
24772 # CSI u restore cursor position to saved value
24773 # CSI =<c>A set overscan color
24774 # CSI =<c>F set normal foreground color
24775 # CSI =<c>G set normal background color
24776 # CSI =<c>H set reverse foreground color
24777 # CSI =<c>I set reverse foreground color
24778 # CSI =<c>J set graphic foreground color
24779 # CSI =<c>K set graphic foreground color
24780 # CSI =<n>g (dispc) display n from alternate graphics character set
24781 # CSI =<p>;<d>B set bell parameters
24782 # CSI =<s>;<e>C set cursor parameters
24783 # CSI =<x>D enable/disable intensity of background color
24784 # CSI =<x>E set/clear blink vs. bold background
24785 # CSI 7 (sc) (sc) save cursor position
24786 # CSI 8 (rc) (rc) restore cursor position to saved value
24787 # CSI H (hts) (hts) set tab stop
24788 # CSI Q<n><string> define function key string
24789 # (string must begin and end with delimiter char)
24790 # CSI c (clear) clear screen
24792 # The lack of any specification for attributes in SGR (among other things)
24793 # makes this a wretchedly weak standard. The table above is literally
24794 # everything iBSC2 has to say about terminal escape sequences; there is
24795 # no further discussion of their meaning or how to set the parameters
24796 # in these sequences at all.
24799 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
24801 # The historical termcap file entries were written primarily in 4.4BSD termcap.
24802 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
24803 # with the extension names chosen for compatibility with the termcap names
24804 # assigned in System V terminfo. There are some variant extension sets out
24805 # there. We try to describe them here.
24807 #### XENIX extensions:
24809 # The XENIX extensions include a set of function-key capabilities as follows:
24811 # code XENIX variable name terminfo name name clashes?
24812 # ---- ------------------- ------------- -----------------------
24814 # CR key_char_right
24815 # CW key_change_window create_window
24817 # HM key_home khome
24819 # LD key_delete_line kdl1
24820 # LF key_linefeed label_off
24821 # NU key_next_unlocked_cell
24822 # PD key_page_down knp
24824 # PN start_print mc5
24826 # PS stop_print mc4
24827 # PU key_page_up kpp pulse
24828 # RC key_recalc remove_clock
24829 # RF key_toggle_ref req_for_input
24830 # RT key_return kent
24831 # UP key_up_arrow kcuu1 parm_up_cursor
24833 # WR key_word_right
24835 # The XENIX extensions also include the following character-set and highlight
24838 # XENIX terminfo function
24839 # ----- -------- ------------------------------
24840 # GS smacs start alternate character set
24841 # GE rmacs end alternate character set
24842 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
24843 # bo blink begin blink (not used in /etc/termcap)
24844 # be end blink (not used in /etc/termcap)
24845 # bb blink glitch (not used in /etc/termcap)
24846 # it dim begin dim (not used in /etc/termcap)
24847 # ie end dim (not used in /etc/termcap)
24848 # ig dim glitch (not used in /etc/termcap)
24850 # Finally, XENIX also used the following forms-drawing capabilities:
24852 # single double type ASCII approximation
24853 # ------ ------ ------------- -------------------
24854 # GV Gv vertical line |
24855 # GH Gv horizontal line - _
24856 # G1 G5 top right corner _ |
24857 # G2 G6 top left corner |
24858 # G3 G7 bottom left corner |_
24859 # G4 G8 bottom right corner _|
24860 # GD Gd down-tick character T
24861 # GL Gl left-tick character -|
24862 # GR Gr right-tick character |-
24863 # GC Gc middle intersection -|-
24864 # GU Gu up-tick character _|_
24866 # These were invented to take advantage of the IBM PC ROM character set. One
24867 # can compose an acsc string from the single-width characters as follows
24868 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
24869 # When translating a termcap file, ncurses tic will do this automatically.
24870 # The double forms characters don't fit the SVr4 terminfo model.
24872 #### AT&T Extensions:
24874 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
24875 # nonstandard capabilities. Its signature is the KM capability, used to name
24876 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
24877 # set. Comments in the original, and a little cross-checking with other AT&T
24878 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
24879 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
24880 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
24881 # cursor invisible), and CV=:ve: (make cursor normal).
24885 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
24886 # have the System V capabilities up to SVr1 level. After that, it supports
24887 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
24888 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
24889 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
24890 # HP binary format incompatible with SVr4's.
24892 #### IBM Extensions
24894 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
24895 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
24896 # capabilities following prtr_non with the following special capabilities:
24897 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
24898 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
24899 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
24900 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
24901 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
24902 # renamed (to kcbt and kslt). The places in the box[12] capabilities
24903 # correspond to acsc chars, here is the mapping:
24905 # box1[0] = ACS_ULCORNER
24906 # box1[1] = ACS_HLINE
24907 # box1[2] = ACS_URCORNER
24908 # box1[3] = ACS_VLINE
24909 # box1[4] = ACS_LRCORNER
24910 # box1[5] = ACS_LLCORNER
24911 # box1[6] = ACS_TTEE
24912 # box1[7] = ACS_RTEE
24913 # box1[8] = ACS_BTEE
24914 # box1[9] = ACS_LTEE
24915 # box1[10] = ACS_PLUS
24917 # The box2 characters are the double-line versions of these forms graphics.
24918 # The AIX binary terminfo format is incompatible with SVr4's.
24920 #### Iris console extensions:
24922 # HS is half-intensity start; HE is half-intensity end
24923 # CT is color terminal type (for Curses & rogue)
24924 # CP is color change escape sequence
24925 # CZ are color names (for Curses & rogue)
24927 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
24929 #### TC Extensions:
24931 # There is a set of extended termcaps associated with something
24932 # called the "Terminal Control" or TC package created by MainStream Systems,
24933 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
24934 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
24935 # that flags color terminals.
24937 ######## NCURSES USER-DEFINABLE CAPABILITIES
24939 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
24940 # infocmp to manipulate user-definable capabilities. Those that are intended
24941 # for use in either terminfo or termcap use 2-character names. Extended
24942 # function keys do not use 2-character names, and are available only with
24945 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
24946 # tic/infocmp, and uses this database (with a few changes). There are a few
24947 # differences, noted in
24948 # https://invisible-island.net/ncurses/ncurses-netbsd.html
24950 # ncurses makes explicit checks for a few user-definable capabilities: AX,
24951 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
24953 #### SCREEN Extensions:
24955 # The screen program uses the termcap interface. It recognizes a few useful
24956 # nonstandard capabilities. Those are used in this file.
24958 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
24960 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
24961 # E0 (str) Switch charset 'G0' back to standard charset.
24962 # S0 (str) Switch charset 'G0' to the specified charset.
24963 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
24966 # AX is relatively straightforward; it is interpreted by ncurses to say that
24967 # SGR 39/49 reset the terminal's foreground and background colors to their
24970 # XT is harder, since screen's manpage does not give more details. For that,
24971 # we must read screen's source-code. For example, when XT is set, screen
24974 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
24975 # screen may also set the terminal's name, which is (for xterm) distinct
24976 # from the icon name.
24977 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
24978 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
24979 # this is an rxvt feature.
24980 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
24981 # These are from xterm, although xterm accepts mouse codes that may not be
24982 # recognized by screen, e.g., 1005, 1006.
24983 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
24984 # sequence. However, because screen uses only termcap, the values returned
24985 # by Af/Ab are not usable because they rely on expressions that termcap
24986 # does not support. Therefore, screen uses a hardcoded string to work
24987 # around the limitation. In a few cases, screen also uses tparm, which
24988 # is a terminfo function rather than termcap.
24989 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
24990 # g) screen also uses the feature to decide whether to pay attention to other
24991 # xterm-related features which are unrelated to the description in the
24994 # Since XT is useful only when the outer terminal matches screen's assumptions,
24995 # it is appropriate to use it in the derived terminal descriptions such as
24996 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
24998 # The other ISO-2022 features are rarely used, but provided here to make
24999 # screen's termcap features available.
25001 #### XTERM Extensions:
25003 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
25004 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
25005 # additional function-key strings. Some other developers copied the feature,
25006 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
25007 # these key definitions less ambiguous.
25009 # A few terminals provide similar functionality (sending distinct keys when
25010 # a modifier is used), including rxvt.
25012 # These are the extended keys defined in this file:
25014 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
25015 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
25016 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
25017 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
25019 # Here are the other xterm-related extensions which are used in this file:
25021 # Cr is a string capability which resets the cursor color
25022 # Cs is a string capability which sets the cursor color to a given value.
25023 # The single string parameter is the color name/number, according to the
25025 # Ms modifies the selection/clipboard. Its parameters are
25026 # p1 = the storage unit (clipboard, selection or cut buffer)
25027 # p2 = the base64-encoded clipboard content.
25028 # Se resets the cursor style to the terminal power-on default.
25029 # Ss is a string capability with one numeric parameter. It is used to set the
25030 # cursor style as described by the DECSCUSR function to a block or
25032 # TS is a string capability which acts like "tsl", but uses no parameter and
25033 # goes to the first column of the "status line".
25034 # XM is a string capability which overrides ncurses's built-in string which
25035 # enables/disables xterm mouse mode.
25036 # xm shows the format of the mouse responses. Parameters:
25040 # p4 = state, e.g., pressed or released
25041 # p5 = y-ordinate starting region
25042 # p6 = x-ordinate starting region
25043 # p7 = y-ordinate ending region
25044 # p8 = x-ordinate ending region
25045 # Other extensions, used in xm:
25048 #### Miscellaneous extensions:
25050 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
25051 # This was implemented for the Hurd.
25052 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
25053 # experimental feature of tmux.
25054 # CO gives the number of indexed ("ANSI") colors which overlay an RGB color
25056 # E3 clears the terminal's scrollback buffer. This was implemented in the
25057 # Linux 3.0 kernel as a security feature. It matches a feature which was
25058 # added in xterm patch #107.
25059 # U8 is a numeric capability which denotes a terminal emulator which does not
25060 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
25061 # value to enable it.
25062 # Smulx modifies the appearance of underlines in VTE, December 2017.
25064 ######## CHANGE HISTORY
25066 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
25067 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
25068 # maintained by Eric S. Raymond as part of the ncurses project.
25070 # This file contains all the capability information present in John Kunze's
25071 # last version of the termcap master file, except as noted in the change
25072 # comments at end of file. Some information about very ancient obsolete
25073 # capabilities has been moved to comments. Some all-numeric names of older
25074 # terminals have been retired.
25076 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
25077 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
25078 # used by BSD curses.
25080 # The 9.1.0 version of this file was translated from my lightly-edited copy of
25081 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
25082 # the purpose. Unless the ncurses tic implementation and the Lisp code were
25083 # making perfectly synchronized mistakes which I then failed to catch by
25084 # eyeball, the translation was correct and perfectly information-preserving.
25086 # Major version number bumps correspond to major version changes in ncurses.
25088 # Here is a log of the changes since then:
25090 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
25091 # * First terminfo master translated from 8.3.
25092 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
25093 # * Replaced Wyse entries with updated entries supplied by vendor.
25095 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
25096 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
25097 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
25098 # * Better XENIX keycap translation. Describe TC termcaps.
25099 # * Contact and history info supplied by Qume.
25100 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
25101 # * Raided the Shuford FTP site for recent termcaps/terminfos.
25102 # * Added information on X3.64 and VT100 standard escape sequences.
25103 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
25104 # * Added a correct X11R6 xterm entry.
25105 # * Fixed terminfo translations of padding.
25106 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
25107 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
25108 # * Added u6/u7/u8/u9 capabilities.
25109 # * Added PCVT entry.
25110 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
25111 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
25112 # to use reverse-video standout so Emacs will look right.
25113 # * Added el1 capability to ansi.
25114 # * Added smacs/rmacs to ansi.sys.
25116 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
25117 # * New mt70 entry.
25118 # * Added COPYRIGHTS AND OTHER DELUSIONS.
25119 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
25120 # smartvid & smarterm, ampex 175 & 219 & 232,
25121 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
25122 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
25123 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
25124 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
25125 # * Replaced the Perkin-Elmer entries with vendor's official ones.
25126 # * Restored the old minimal-ansi entry, luna needs it.
25127 # * Fixed some incorrect ip and proportional-padding translations.
25128 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
25129 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
25130 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
25131 # to force a particular height.
25132 # * Added beehive4 and reorganized other Harris entries.
25133 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
25134 # * Merged in DEC's official entries for its terminals. The only old
25135 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
25136 # * Replaced the translated BBN BitGraph entries with purpose-built
25137 # ones from AT&T's SVr3.
25138 # * Replaced the AT&T entries with AT&T's official terminfos.
25139 # * Added teleray 16, vc415, cops10.
25140 # * Merged in many individual capabilities from SCO terminfo files.
25141 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
25143 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
25144 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
25145 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
25146 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
25147 # simterm, citoh and variants.
25148 # * Replaced sol entry with sol1 and sol2.
25149 # * Replaced Qume QVT and Freedom-series entries with purpose-built
25150 # terminfo entries.
25151 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
25152 # and dg200 entries using caps from from SCO.
25153 # * Added the usual set of function-key mappings to ANSI entry.
25154 # * Corrected xterm's function-key capabilities.
25155 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
25156 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
25157 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
25158 # * Fix in xterm entry, get the arrow keys right.
25159 # * Change some \0 escapes to \200.
25160 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
25161 # * Added apple (Videx card), adm1a, oadm31.
25162 # * Fixed malformed ampex csr.
25163 # * Fixed act4, cyb110; they had old-style prefix padding left in.
25164 # * Changed mandatory to advisory padding in many entries.
25165 # * Replaced HP entries up to hpsub with purpose-built ones.
25166 # * Blank rmir/smir/rmdc/smdc capabilities removed.
25167 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
25168 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
25169 # * Replaced the Ann Arbor entries with SCO's, the init strings are
25170 # more efficient (but the entries otherwise identical).
25171 # * Added dg211 from Shuford archive.
25172 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
25173 # adm42-nl, pc52, gs6300, xerox820, uts30.
25174 # * Pull SCO's padding into vi200 entry.
25175 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
25176 # entries merged in from SCO's descriptions.
25177 # * Fixed old-style prefix padding on zen50, h1500.
25178 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
25179 # entry from SCO's description.
25180 # * Reorganized the special entries.
25181 # * Added lm#0 to cbunix and virtual entries.
25183 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
25184 # * Restored cdc456tst.
25185 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
25186 # * Added megatek, beacon, microkit.
25187 # * Freeze for ncurses-1.9 release.
25188 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
25189 # * Added historical data for TAB.
25190 # * Comment fixes from David MacKenzie.
25191 # * Added the new BSDI pc3 entry.
25192 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
25193 # * A change in the tic -C logic now ensures that all entries in
25194 # the termcap translation will fit in < 1024 bytes.
25195 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
25196 # from GNU termcap file. This merges in all their local information.
25197 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
25198 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
25199 # * Added warnings about entries with long translations (restoring
25200 # all the GNU termcaps pushes a few over the edge).
25201 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
25202 # * Yet another tic change, and a couple of entry tweaks, to reduce the
25203 # number of long (> 1024) termcap translations back to 0.
25205 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
25206 # * Added kf13-kf20 to Linux entry.
25207 # * Regularize Prime terminal names.
25208 # * Historical data on Synertek.
25209 # * Freeze for ncurses-1.9.1.
25210 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
25211 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
25212 # * Eliminate whitespace in short name fields, this tanks some scripts.
25213 # * Name field changes to shorten some long entries.
25214 # * Termcap translation now automatically generates empty rmir/smir
25215 # when ich1/ich is present (copes with an ancient vi bug).
25216 # * Added `screen' entries from FSF's screen-3.6.2.
25217 # * Added linux-nic and xterm-nic entries.
25218 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
25219 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
25220 # eliminating some special-case code in ncurses.
25222 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
25223 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
25224 # that captures everything unique from it.
25225 # * Added reorder script generator.
25226 # * Freeze for ncurses 1.9.2 release.
25227 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
25228 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
25229 # * Added Olaf Siebert's corrections for adm12.
25230 # * ansi-pc-color now includes the colors and pairs caps, so that
25231 # entries which use it will inherit them automatically.
25232 # * The linux entry can now recognize the center (keypad 5) key.
25233 # * Removed some junk that found its way into Linux acsc.
25235 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
25236 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
25237 # * xterm doesn't try to use application keypad mode any more.
25238 # * Freeze for ncurses-1.9.3 release.
25239 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
25240 # * Added corrected sun entry from vendor.
25241 # * Added csr capability to linux entry.
25242 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
25243 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
25244 # * Some commented-out caps in long entries come back in, my code
25245 # for computing string-table lengths had a bug in it.
25246 # * pcansi series modified to fit comm-program reality better.
25247 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
25248 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
25249 # * Correct some bad aliases in the pcansi series
25250 # * Added entry for QNX console.
25251 # * Clean up duplicate long names for use with 4.4 library.
25252 # * Change vt100 standout to be normal reverse vide, not bright reverse;
25253 # this makes the Emacs status line look better.
25254 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
25255 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
25256 # * Minor surgery, mostly on name strings, to shorten termcap version.
25258 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
25259 # * Added dec-vt100 for use with the EWAN emulator.
25260 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
25261 # * Freeze for 1.9.5 alpha release.
25262 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
25263 # * Changed xterm lines to 24, the X11R6 default.
25264 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
25265 # * Added 7 newly discovered, undocumented acsc characters to linux
25266 # entry (the pryz{|} characters).
25267 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
25268 # * Correct two typos in the xterm entries introduced in 9.9.1.
25269 # * I finally figured out how to translate ko capabilities. Done.
25270 # * Added tvi921 entries from Tim Theisen.
25271 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
25272 # * Removed mystery tec entry, it was neither interesting nor useful.
25273 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
25274 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
25275 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
25276 # by making them relative to use capabilities
25277 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
25278 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
25279 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
25281 # * Translate all home=\E[;H capabilities to home=\E[H, they're
25283 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
25284 # vt100 and ANSI-like terminals.
25285 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
25286 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
25287 # does this now, too.
25288 # * fviewpoint is gone, it duplicated screwpoint.
25289 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
25290 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
25291 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
25292 # The UW vi50 replaces the old one, which becomes vi50adm,
25293 # * No more embedded commas in name fields.
25295 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
25296 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
25297 # * Introduced klone+* entries for describing Intel-console behavior.
25298 # * Linux kbs is default-mapped to delete for some brain-dead reason.
25299 # * -nsl -> -ns. The -pp syntax is obsolete.
25300 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
25301 # * Make xterm entry do application-keypad mode again. I got complaints
25302 # that it was messing up someone's 3270 emulator.
25303 # * Added some longname fields in order to avoid warning messages from
25304 # older tic implementations.
25305 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
25306 # it! (This gives us pi, greater than, less than, and a few more.)
25307 # * Freeze for ncurses-1.9.6 release.
25308 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
25309 # * Add xon to a number of console entries, they're memory-mapped and
25310 # don't need padding.
25311 # * Correct the use dependencies in the ansi series.
25312 # * Hand-translate more XENIX capabilities.
25313 # * Added hpterm entry for HP's X terminal emulator.
25314 # * Added aixterm entries.
25315 # * Shortened four names so everything fits in 14 chars.
25317 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
25318 # * Added ibcs2 entry and info on iBCS2 standard.
25319 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
25320 # * We can handle the HP meml/memu capability now.
25321 # * Added smacs to klone entries, just as documentation.
25322 # * Corrected ansi.sys and cit-500 entries.
25323 # * Added z39, vt320-k311, v220c, and avatar entries.
25324 # * Make pcansi use the ansi.sys invis capability.
25325 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
25326 # tvi925, tvi950, dt80, ncr7900i, h19.
25327 # * X3.64 has been withdrawn, change some references.
25328 # * Removed function keys from ansi-m entry.
25329 # * Corrected ansi.sys entry.
25330 # * Freeze for ncurses-1.9.7 release.
25331 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
25332 # * Added rmam/smam capabilities to many entries based on init strings.
25333 # * Added correct hpa/vpa to linux.
25334 # * Reduced several entries relative to vt52.
25335 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
25336 # * Exiled some utterly unidentifiable custom and homebrew types to the
25337 # UFO file; also, obsolete small-screen hardware; also, entries which
25338 # look flat-out incorrect, garbled, or redundant. These include the
25339 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
25340 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
25341 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
25342 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
25343 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
25344 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
25345 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
25346 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
25347 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
25348 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
25349 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
25350 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
25351 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
25352 # * Corrected pcvt25h as suggested by Brian C. Grayson
25353 # <bgrayson@pine.ece.utexas.edu>.
25354 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
25355 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
25356 # * Added kent=\EOM to xterm entry.
25358 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
25359 # * Corrected gigi entry.
25360 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
25361 # bad hpa/vpa capabilities.
25362 # * Corrected flash strings to have a uniform delay of .2 sec. No
25363 # more speed-dependent NUL-padding!
25364 # * terminfo capabilities in comments bracketed with <>.
25365 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
25366 # * Replaced pcvt with the 3.31 pcvt entries.
25367 # * Freeze for 1.9.7a.
25368 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
25369 # * Added emu entry from the X11R6 contrib tape sources.
25371 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
25372 # * Improved iris-ansi and sun entries.
25373 # * More flash string improvements.
25374 # * Corrected wy160 & wy160 as suggested by Robert Dunn
25375 # * Added dim to at386.
25376 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
25377 # he's ready to start using the termcap generated from this one.
25378 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
25379 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
25380 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
25381 # att610, att620, att630,
25382 # * Changed hazeltine name prefix from h to hz.
25383 # * Sent t500 to the UFI file.
25384 # * I think we've sucked all the juice out of BSDI's termcap file now.
25385 # * Freeze for ncurses 1.9.8 release
25386 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
25387 # * Unfreeze, linux kbs needed to be fixed.
25388 # * Tim Theisen pinned down a bug in the DMD firmware.
25389 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
25390 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
25391 # (The broken ones had been shadowed by sgr.)
25392 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
25393 # * Added documentation on ECMA-48 standard.
25394 # * New Amiga entry.
25395 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
25396 # * More ECMA-48 stuff
25397 # * Corrected typo in minix entry, added pc-minix.
25398 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
25399 # * Added rxvt entry.
25400 # * Added 1.3.x color-change capabilities to linux entry.
25401 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
25402 # * Corrected rxvt entry khome/kend.
25403 # * Corrected linux color change capabilities.
25404 # * NeXT entries from Dave Wetzel.
25405 # * Cleaned up if and rf file names (all in /usr/share now).
25406 # * Changed linux op capability to avoid screwing up a background color
25407 # pair set by setterm.
25408 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
25409 # * Added xterm-sun.
25410 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
25413 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
25414 # * Another sweep through the Shuford archive looking for new info.
25415 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
25416 # * Added st52 from Per Persson.
25417 # * Added eterm from the GNU Emacs 19.30 distribution.
25418 # * Freeze for 1.9.9.
25419 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
25420 # * FreeBSD console entries from Andrew Chernov.
25421 # * Removed duplicate Atari st52 name.
25422 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
25423 # * xterm doesn't actually have ACS_BLOCK.
25424 # * Change klone+color setf/setb to simpler forms that can be
25425 # translated into termcap.
25427 # * Removed mechanically-generated junk capabilities from cons* entries.
25428 # * Added color support to bsdos.
25429 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
25430 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
25431 # * Created ecma+color, linux can use it. Also added ech to linux.
25432 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
25433 # * Add descriptions to FreeBSD console entries. Also shorten
25434 # some aliases to <= 14 chars for portability.
25435 # * Added x68k console
25436 # * Added OTbs to several VT-series entries.
25437 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
25438 # * screen entry update for 3.7.1 from Michael Alan Dorman.
25439 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
25440 # * kterm correction due to Kenji Rikitake.
25441 # * ACS correction in vt320-kll due to Phillippe De Muyter.
25442 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
25443 # * Sun console entry correction from J.T. Conklin.
25444 # * Changed all DEC VT300 and up terminals to use VT300 tab set
25445 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
25446 # * Added smul to linux entry (we never noticed it was missing
25447 # because of sgr!).
25448 # * Added rmln to hp+labels (deduced from other HP entries).
25449 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
25450 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
25451 # * Corrected vt220 acsc.
25452 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
25453 # this corresponds to reality and helps prevent some tic warnings.
25454 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
25455 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
25456 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
25457 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
25458 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
25459 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
25460 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
25461 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
25462 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
25463 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
25464 # ifmr, v3220, wy100q, tandem653, ibmaed.
25465 # * Added DWK terminal description.
25466 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
25467 # * Many entries now have highlights inherited from adm+sgr.
25468 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
25469 # * xtitle and xtitle-twm enable access to the X status line.
25470 # * Added linux-1.3.6 color palette caps in conventional format.
25471 # * Added adm1178 terminal.
25472 # * Move fos and apollo terminals to obsolete category.
25473 # * Aha! The BRL terminals file told us what the Iris extensions mean.
25474 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
25475 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
25477 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
25478 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
25479 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
25480 # * Corrected, from BRL termcap file: vi50.
25481 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
25482 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
25483 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
25484 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
25485 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
25486 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
25487 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
25488 # * Paired-attribute fixes to various terminals.
25489 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
25490 # * xterm entry corrections from Thomas Dickey.
25491 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
25492 # * Added t916 entry, translated from a termcap in SCO's support area.
25493 # * New qnx entry from Michael Hunter.
25494 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
25495 # * Added hpex2 from Ville Sulko.
25496 # * Fixed a bug that ran the qnx and pcvtXX together.
25497 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
25498 # * Added dtterm entry from Solaris CDE.
25499 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
25500 # * corrected pairs#8 typo in dtterm entry.
25502 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
25503 # * updated xterm entry to cover 3.1.2E's new features.
25504 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
25505 # * Added new minix entry
25506 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
25507 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
25508 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
25509 # * Added Prism entries and kt7ix.
25510 # * Caution notes about EWAN and tabset files.
25511 # * Changed /usr/lib/tabset -> /usr/share/tabset.
25512 # * Added acsc/rmacs/smacs to vt52.
25513 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
25514 # * Merged in Thomas Dickey's reorganization of the xterm entries;
25515 # added technical corrections to avoid warning messages.
25516 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
25517 # * Added rmso=\E[27m in Linux entry.
25518 # * Added koi8-r support for Linux console.
25519 # * Replace xterm entries with canonical ones from XFree86 3.2.
25520 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
25521 # * Added color_xterm from Jacob Mandelson
25522 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
25523 # * Back off the xterm entry to use r6 as a base.
25524 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
25525 # * Added dec-vt220 at Adrian Garside's request.
25527 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
25529 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
25530 # * Minor corrections to xterm entries.
25531 # * Replaced EWAN telnet entry.
25532 # * Dropped the reorder script generator. It was a fossil.
25533 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
25534 # * Replaced minitel-2 entry.
25535 # * Added MGR, ansi-nt.
25536 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
25537 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
25538 # the 4.4BSD Lite2 file.
25540 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
25541 # * Use setaf/setab consistently with SVr4.
25542 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
25543 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
25544 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
25545 # * add xterm-16color, for XFree86 3.3
25546 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
25547 # * correct typo in emu
25548 # * correct typo in vt102-w (Robert Wuest)
25549 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
25550 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
25551 # * remove ech capability from rxvt (it does the wrong thing)
25552 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
25553 # * remove spurious newlines from several entries (hp+color, wy50,
25554 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
25556 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
25557 # * correct rmso capability of wy50-mc
25558 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
25559 # * add cbt to xterm-xf86-v32
25560 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
25561 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
25562 # other capabilities not in xterm-r6.
25563 # * remove alternate character set from kterm entry.
25564 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
25565 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
25566 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
25567 # * add xterm-8bit entry.
25568 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
25569 # * repair several places where early version of tic replaced \, with \\\,
25570 # * make acsc entries canonical form (sorted, uniq).
25571 # * modify acsc entries for linux, linux-koi8
25572 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
25573 # * add color, mouse support to kterm.
25574 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
25575 # * correct wy120 smxon/tbc capabilities which were stuck together.
25576 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
25577 # * add entry for xterm-xf86-v39t
25578 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
25579 # * add u8,u9 to sun-il description
25580 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
25581 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
25583 # * add hds200 description (Walter Skorski)
25584 # * add EMX 0.9b descriptions
25585 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
25586 # * rename xhpterm back to hpterm.
25587 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
25588 # * change initc in linux-c-nc to use 0..1000 range.
25589 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
25590 # * remove hpa/vpa from rxvt, which implements them incorrectly.
25591 # * add sgr0 for rxvt.
25592 # * remove bogus smacs/rmacs from EMX descriptions.
25593 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
25594 # * revised entry for att7300
25595 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
25596 # * use \0 rather than \200.
25597 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
25598 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
25599 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
25600 # * rename xterm-xf86-v39t to xterm-xf86-v40
25601 # * remove bold/underline from sun console entries since they're not
25603 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
25604 # * add beterm entry (Fred Fish)
25605 # * add irix-color/xwsh entry.
25606 # * turn ncv off for linux.
25607 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
25608 # * set ncv for FreeBSD console (treat colors with reverse specially).
25609 # * remove sgr string from qnx based on report by Xiaodan Tang
25610 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
25611 # * remove spurious commas from descriptions
25612 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
25613 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
25614 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
25615 # apparently based on cp-866).
25617 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
25619 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
25620 # * Replaced minitel-2 entry.
25621 # * Added MGR, ansi-nt.
25622 # * Minor corrections to xterm entries.
25623 # * Replaced EWAN telnet entry.
25624 # * Dropped the reorder script generator. It was a fossil.
25625 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
25626 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
25627 # the 4.4BSD Lite2 file.
25628 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
25629 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
25630 # * Updated iris-ansi; corrected vt102-w.
25631 # * Switch base xterm entry to 3.3 level.
25632 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
25634 # * Removed rmir/smir from tv92B.
25636 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
25637 # * add hds200 description (Walter Skorski)
25638 # * add beterm entry (Fred Fish)
25639 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
25640 # iris-color entries.
25641 # * add emx entries.
25642 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
25643 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
25645 # * remove sgr string from qnx based on report by Xiaodan Tang
25646 # * Added u8/u9, removed rmul/smul from sun-il.
25647 # * 4.2 tic displays \0 rather than \200.
25648 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
25649 # apparently based on cp-866).
25650 # * Merged in Pavel Roskin's acsc for linux-koi8
25651 # * Corrected some erroneous \\'s to \.
25652 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
25653 # * II -> ii in pcvtXX, screen, xterm.
25654 # * Removed \n chars following ANSI escapes in sgr & friends.
25655 # * Updated Wyse entries.
25656 # * h19 corrections from Tim Pierce.
25657 # * Noted that the dm2500 has both ich and smir.
25658 # * added pccons for the Alpha under OSF/1.
25659 # * Added Sony NEWS workstation entries and cit101e-rv.
25660 # * Reverted `amiga'; to Kent Polk's version, as I'm told
25661 # the Verkuil entry messes up with Amiga Telnet.
25662 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
25663 # * Corrected attributions in 10.2.0 release notes.
25664 # * Scanned the Shuford archive for new terminfos and information.
25665 # * Removed sgr from qnx entry (Thomas Dickey).
25666 # * Added entries for ICL and Kokusai Data Systems terminals.
25667 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
25668 # * Incorporated att700 from the Boundless Technology FTP site.
25669 # * Miscellaneous contact-address and Web-page updates.
25671 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
25674 # * add nxterm and xterm-color terminfo description (request by Cristian
25675 # Gafton <gafton@redhat.com>).
25676 # * modify rxvt terminfo description to clear alternate screen before
25677 # switching back to normal screen, for compatibility with applications
25678 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
25679 # * modify linux terminfo description to reset color palette (reported
25680 # by Telford Tendys <telford@eng.uts.edu.au>).
25683 # * merge changes from current XFree86 xterm terminfo descriptions.
25686 # * Added minitel1 entries from Alexander Montaron.
25687 # * Added qnxt2 from Federico Bianchi.
25688 # * Added arm100 terminfo entries from Dave Millen.
25691 # * Added ncsa telnet entries from Francesco Potorti
25694 # * modify ncsa telnet entry to reflect color, other capabilities based on
25695 # examination of the source code - T.Dickey.
25698 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
25701 # * Added Francesco Potorti's tuned Wyse 99 entries.
25702 # * dtterm enacs correction from Alexander V. Lukyanov.
25703 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
25704 # * correct a typo in icl6404 entry.
25705 # * add xtermm and xtermc
25708 # * format most %'char' sequences to %{number}
25709 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
25710 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
25713 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
25714 # * correct initialization string in xterm-r5, add misc other features
25715 # to correspond with xterm patch #84 - TD
25718 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
25719 # * add Mathew Vernon's mach console entries
25720 # * corrections for ncsa function-keys (report by Larry Virden)
25723 # * change linux to use ncv#2, since underline does not work with color - TD
25726 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
25727 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
25728 # application modes, change kent to use the correct keypad code - TD
25731 # * add entry for Tera Term - TD
25734 # * minor improvements for teraterm entry - TD
25735 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
25736 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
25739 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
25740 # xterm and ncsa entries by removing the unneeded ones. Note that
25741 # some entries will return kend & khome versus kslt and kfnd, for
25742 # PC-style keyboards versus strict vt220 compatibility - TD
25745 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
25747 # * add 'crt' entry - TD
25748 # * correct typos in 'linux-c' entry - TD
25751 # * update entries for BSD/OS console to use klone+sgr and klone+color
25752 # (Jeffrey C Honig)
25755 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
25758 # * add linux-lat, from RedHat patches to ncurses 4.2
25761 # * add complete set of default function-key definitions for scoansi - TD.
25764 # * add cnorm, cvvis for Linux 2.2 kernels
25767 # * add kmous to xterm-r5 -TD
25768 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
25769 # parent "use" clause -TD
25772 # * corrected cnorm, added el1 in 'screen' description -TD
25775 # * add ms-vt100 -TD
25778 # * corrections to beterm entry -TD
25781 # * add cygwin entry -TD
25784 # * minor corrections for beterm entry -TD
25787 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
25790 # * add amiga-8bit entry
25791 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
25792 # rcons-color, based on
25793 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
25794 # * add alias for iris-ansi-net
25797 # * corrected scoansi entry's acsc, some function keys, add color -TD
25800 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
25801 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
25802 # key mapping, leaving Potorti's entries more like he named them -TD
25803 # * remove enter/exit am-mode from cygwin -TD
25806 # * correct typos in several entries (missing '[' from CSI):
25807 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
25808 # strings for avt-ns -TD
25809 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
25812 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
25813 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
25814 # * add xterm-88color and xterm-256color -TD
25817 # * add "obsolete" termcap strings -TD
25818 # * add kvt and gnome entries -TD
25821 # * correct cup string for regent100 -TD
25824 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
25825 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
25826 # * change OTrs capabilities to rs2 -TD
25827 # * add obsolete and extended capabilities to 'screen' -TD
25830 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
25832 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
25833 # and adding kcbt -TD
25836 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
25837 # nonstandard resource settings -TD
25840 # * minor fixes for xterm-*, based on Debian #58530 -TD
25843 # * add several terminal types from esr's "11.0", as well as comments.
25844 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
25845 # vt220-8bit, vt220-old, wy85-8bit
25848 # * add several terminal types from esr's "11.0.1" (ansi-*).
25849 # * update OTxx capabilities for changes on 2000/3/4.
25850 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
25853 # * move screen's AX extension to ecma+color, modify several entries to
25854 # use that, adjusting ncv as needed -TD
25857 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
25858 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
25859 # in esr's version.
25862 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
25863 # * correct color definition for ibm3164, make minor changes to other
25864 # IBM terminal definitions based on recent terminfo descriptions -TD
25867 # * add mgterm, from NetBSD -TD
25868 # * add alias sun-cgsix for sun-ss5 as per NetBSD
25869 # * change cons25w to use rs2 for reset rather than rs1 -TD
25870 # * add rc/sc to aixterm based on manpage -TD
25873 # * remove ncv from xterm-16color, xterm-256color
25876 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
25879 # * add Eterm (Michael Jennings)
25882 # * add amiga-vnc entry.
25885 # * correct description of Top Gun Telnet.
25886 # * add kterm-color
25889 # * add qansi* entries from QNX ftp site.
25892 # * add Matrix Orbital entries by Eric Z. Ayers).
25893 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
25897 # * add S0, E0 extensions to screen's entry -TD
25900 # * several corrections based on tic's new parameter-checking code -TD
25901 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
25902 # bracketing sequences that reset video attributes (\E8 would restore
25906 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
25909 # * improved scoansi, based on SCO man-page, and testing console,
25910 # scoterm with tack -TD
25913 # * modify kterm to use acsc via SCS controls.
25916 # * screen 3.9.8 allows xterm mouse controls to pass-through
25919 # * remove spurious "%|" from some xterm entries.
25922 # * modify 'screen' khome/kend to match screen 3.09.08
25923 # * add examples of 'screen' customization (screen.xterm-xfree86,
25924 # screen.xterm-r6, screen.teraterm) -TD
25927 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
25928 # * add "Apple_Terminal" entries -Benjamin Sittler
25929 # * remove time-delays from "Apple_Terminal" entries -TD
25930 # * make sgr entries time-delays consistent with individual caps -TD
25933 # * corrected/updated screen.xterm-xfree86
25936 # * ELKS descriptions, from Federico Bianchi
25937 # * add u6 (CSR) to Eterm (Michael Jennings).
25940 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
25941 # tic which handles names no longer than 14 characters. Add
25942 # corresponding descriptions for the Darwin PowerPC console named
25943 # "xnuppc" -Benjamin Sittler
25946 # * change kbs in mach entries to ^? (Marcus Brinkmann).
25949 # * add "putty" entry -TD
25950 # * updated "Apple_Terminal" entries -Benjamin Sittler
25953 # * add ms-vt100-color entry -TD
25954 # * add "konsole" entries -TD
25957 # * update gnome entry to Redhat 7.2 -TD
25960 # * add kf13-kf48 strings to cons25w -TD
25961 # * add pcvt25-color entry -TD
25962 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
25963 # * improve some features of scoansi entry based on SCO's version -TD
25964 # * add scoansi-new entry corresponding to OpenServer 5.0.6
25967 # * add kcbt to screen entry -TD
25970 # * add rxvt-16color, ibm+16color, mvterm entries -TD
25973 # * split out linux-basic entry, making linux-c inherit from that, and
25974 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
25975 # the history of this console type -TD
25976 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
25977 # r/g/b parameters of initc are in the range 0 to 1000 -TD
25980 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
25983 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
25984 # in the latter -TD
25987 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
25988 # * ncr260wy350pp has only 16 color pairs -TD
25989 # * add sun-type4 from NetBSD -TD
25990 # * update xterm-xfree86 to current (xterm patch #170) -TD
25991 # * add screen-bce, screen-s entries -TD
25992 # * add xterm-1002, xterm-1003 entries -TD
25995 # * update homepage for Top Gun Telnet/SSH
25998 # * reduce duplication in emx entries, added emx-base -TD
26001 # * corrected acs for screen.teraterm -TD
26002 # * add tkterm entry -TD
26005 # * cygwin changes from Charles Wilson:
26006 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
26007 # primary instead of nxterm, to match XFree86's xterm.terminfo
26008 # usage and to prevent circular links.
26009 # (rxvt): add additional codes from rxvt.org.
26010 # (rxvt-color): new alias
26011 # (rxvt-xpm): new alias
26012 # (rxvt-cygwin): like rxvt, but with special acsc codes.
26013 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
26014 # with a "native" MSWin GUI. Each takes different acsc codes,
26015 # which are both different from the "normal" rxvt's acsc.
26016 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
26017 # (cygwinDBG): ditto.
26020 # * update gnome terminal entries -TD
26023 # * add entries for djgpp 2.03 and 2.04 -TD
26026 # * add alias for vtnt -TD
26027 # * update xterm-xfree86 for XFree86 4.4 -TD
26030 # * add linux-vt (Andrey V Lukyanov)
26033 # * add screen.linux -TD
26036 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
26039 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
26040 # * add vt100+ and vt-utf8 entries -TD
26041 # * add uwin entry -TD
26044 # * add sgr strings to several common entries lacking them, e.g.,
26045 # screen, to make the entries more portable -TD
26046 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
26047 # * similar fixups for cvvis/cnorm various entries -TD
26050 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
26054 # * add xterm-xf86-v44 -TD
26055 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
26056 # on G1 being used via an ISO-2022 escape sequence (report by
26057 # Juliusz Chroboczek) -TD
26058 # * add 'hurd' entry -TD
26061 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
26063 # * align with xterm #192's use of xterm-new -TD
26064 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
26065 # * make xterm-new the default "xterm" -TD
26068 # * minor fixes for emu -TD
26070 # * add rmam/smam to linux (Trevor Van Bremen)
26071 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
26072 # * fixes for avatar0 -TD
26073 # * fixes for vp3a+ -TD
26076 # * add xterm-pc-fkeys -TD
26077 # * review/update gnome and gnome-rh90 entries (prompted by
26078 # Redhat Bugzilla #122815) -TD
26079 # * review/update konsole entries -TD
26080 # * add sgr, correct sgr0 for kterm and mlterm -TD
26081 # * correct tsl string in kterm -TD
26084 # * make ncsa-m rmacs/smacs consistent with sgr -TD
26085 # * add sgr, rc/sc and ech to syscons entries -TD
26086 # * add function-keys to decansi -TD
26087 # * add sgr to mterm-ansi -TD
26088 # * add sgr, civis, cnorm to emu -TD
26089 # * correct/simplify cup in addrinfo -TD
26090 # * corrections for gnome and konsole entries
26091 # (Redhat Bugzilla #122815) -Hans de Goede
26092 # * modify DEC entries (vt220, etc), to add sgr string, and to use
26093 # ISO-2022 strings for rmacs/smacs -TD
26096 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
26099 # * improved putty entry -Robert de Bath
26102 # * remove dch/dch1 from rxvt because they are implemented inconsistently
26103 # with the common usage of bce/ech -TD
26104 # * remove khome from vt220 (vt220's have no home key) -TD
26105 # * add rxvt+pcfkeys -TD
26108 # * modify several entries to ensure xterm mouse and cursor visibility
26109 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
26110 # Eterm, screen. (The xterm entries are left alone - old ones for
26111 # compatibility, and the new ones do not require this change) -TD
26114 # * add morphos entry -Pavel Fedin
26115 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
26116 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
26119 # * update wsvt25 entry -TD
26122 # * update pairs for xterm-88color and xterm-256color to reflect the
26123 # ncurses extended-color support -TD
26126 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
26127 # * add aixterm-16color to demonstrate 16-color capability -TD
26130 # * add media-copy to vt100 -TD
26131 # * corrected acsc string for vt52 -TD
26134 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
26136 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
26139 # * re-corrected acsc string for vt52 -TD
26142 # * corrected sun-il sgr string which referred to bold and underline -TD
26143 # * add sun-color entry -TD
26146 # * modify sgr0 in several entries to reset alternate-charset as in the
26148 # * modify sgr string of prism9 to better match the individual
26152 # * correct order of use= in rxvt-basic -TD
26155 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
26158 # * other minor fixes to cygwin based on tack -TD
26159 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
26162 # * add nsterm-16color entry -TD
26163 # * remove ncv flag from xterm-16color -TD
26164 # * remove setf/setb from xterm-256color to match xterm #209 -TD
26165 # * update mlterm entry to 2.9.2 -TD
26168 # * fixes to make nsterm-16color match report
26169 # by Christian Ebert -Alain Bench
26172 # * add xterm+256color building block -TD
26173 # * add gnome-256color, putty-256color, rxvt-256color -TD
26176 # * add hpterm-color -TD
26179 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
26180 # * add gnome-fc5 (prompted by GenToo #122566) -TD
26181 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
26182 # * improve xterm-256color by combining the ibm+16color setaf/setab
26183 # strings with SGR 48. The setf/setb strings also are cancelled here
26184 # rather than omitted so derived entries will cancel those also -Alain
26188 # * add some notes regarding copyright to terminfo.src -TD
26189 # * use rxvt+pcfkeys in Eterm -TD
26190 # * remove km and flash from gnome, Eterm and rxvt since they do not work
26191 # as one would expect (km sends ESC rather than setting the 8th bit
26193 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
26194 # * add konsole-solaris -TD
26197 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
26198 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
26199 # * modify xterm-24 to inherit from "xterm" -TD
26200 # * add xiterm entry -TD
26201 # * add putty-vt100 entry -TD
26202 # * corrected spelling of Michael A Dorman's name, prompted by
26203 # http://www.advogato.org/person/mdorman/diary.html -TD
26206 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
26207 # * update xterm+pcfkeys to match xterm #216 -TD
26210 # * make descriptions of xterm entries consistent with its terminfo -TD
26213 # * add xfce, mgt -TD
26216 # * correct acsc string in kterm -TD
26219 # * add kon entry -TD
26220 # * remove invis from linux and related entries, add klone+sgr8 for those
26221 # that implement the feature (or have not been shown to lack it) -TD
26224 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
26225 # * minor improvements to rxvt+pcfkeys -TD
26228 # * fix a few typos in if/then/else expressions -TD
26231 # * add several GNU Screen variations with 16- and 256-colors, and
26232 # status line (Alain Bench).
26235 # * add Newbury Data entries (Jean-Charles Billaud).
26238 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
26241 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
26242 # * add konsole-256color entry -TD
26245 # * add 9term entry (request by Juhapekka Tolvanen) -TD
26248 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
26249 # * add shift-control- and control-modified keys for rxvt editing
26251 # * update mlterm entry to 2.9.3 -TD
26252 # * add mlterm+pcfkeys -TD
26255 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
26256 # xterm+pcc0, etc., to make the corresponding building blocks reflect
26257 # xterm's capabilities -TD
26258 # * add mrxvt entry -TD
26259 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
26262 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
26265 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
26266 # xterm starting with xterm patch #216 -TD
26267 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
26268 # to match xterm #230 -TD
26269 # * extend xterm+pccX entries to match xterm #230 -TD
26270 # * add xterm+app, xterm+noapp, from xterm #230 -TD
26271 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
26274 # * add screen.rxvt -TD
26277 # * add screen+fkeys (prompted by Debian #478094) -TD
26280 # * add screen.mlterm -TD
26281 # * improve mlterm and mlterm+pcfkeys -TD
26284 # * add Eterm-256color, Eterm-88color -TD
26285 # * add rxvt-88color -TD
26288 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
26289 # original to teraterm2.3 -TD
26290 # * update "gnome" to 2.22.3 -TD
26291 # * update "konsole" to 1.6.6 -TD
26292 # * add "aterm" -TD
26293 # * add "linux2.6.26" -TD
26296 # * change several \E[2g (clear tab at current column) to \E[3g
26297 # (clear all tabs) to match definition for tbc capability -TD
26300 # * add eterm-color -TD
26303 # * add screen.Eterm -TD
26306 # * correct typo in pfkey of ansi.sys-old
26307 # (report by Kalle Olavi Niemitalo)
26308 # * move function- and cursor-keys from emx-base to ansi.sys, and create
26309 # a pfkey capability which handles F1-F48 -TD
26312 # * add vwmterm entry (Bryan Christ)
26315 # * change ncv and op capabilities in sun-color to match Sun's entry for
26316 # this (report by Laszlo Peter)
26317 # * improve interix smso by using reverse rather than bold (report by
26318 # Kristof Zelechovski).
26321 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
26322 # * add linux-16color (Benjamin Sittler)
26323 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
26324 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
26325 # * add ccc and initc capabilities to xterm-16color -TD
26328 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
26331 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
26334 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
26335 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
26338 # * add bterm (bogl 0.1.18) -TD
26339 # * minor fix to rxvt+pcfkeys -TD
26342 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
26345 # * add several screen-bce.XXX entries -TD
26348 # * modify screen-bce.XXX entries to exclude ech, since screen's color
26349 # model does not clear with color for that feature -TD
26352 # * rename atari and st52 to atari-old, st52-old, use newer entries from
26353 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
26356 # * add mlterm-256color entry -TD
26359 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
26360 # the alternate character set (patch by Nicholas Marriott)
26363 # * improve acsc for vt52 (Benjamin Sittler)
26364 # * modify nsterm entries for consistent sgr/sgr0 -TD
26365 # * modify xnuppc entries for consistent sgr/sgr0 -TD
26366 # * add invis to tek4115 sgr -TD
26369 # * reformat acsc strings to canonical format -TD
26372 # * add "XT" capability to entries for terminals that support both
26373 # xterm-style mouse- and title-controls, for "screen" which
26374 # special-cases TERM beginning with "xterm" or "rxvt" -TD
26377 # * fill in no-parameter forms of cursor-movement where a parameterized
26378 # form is available -TD
26379 # * fill in missing cursor controls where the form of the controls is
26381 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
26384 # * correct comparison used for setting 16-colors in linux-16color
26385 # entry (Novell #644831) -TD
26386 # * improve linux-16color entry, using "dim" for color-8 which makes it
26387 # gray rather than black like color-0 -TD
26390 # * make "vte" the principal entry defining "gnome", since GNOME terminal
26391 # is merely one of several terminals whose behavior is provided by this
26395 # * fix typo in rmso for tek4106 -Goran Weinholt
26398 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
26399 # * also suppress ncv in konsole-base -TD
26402 # * add U8 feature to denote entries for terminal emulators which do not
26403 # support VT100 SI/SO when processing UTF-8 encoding -TD
26404 # * add xterm-utf8 as a demo of the U8 feature -TD
26407 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
26410 # * update minix entry to minix 3.2 (Thomas Cort).
26413 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
26414 # * remove a backslash which continued comment, obscuring altos3
26415 # definition with OpenBSD toolset (Nicholas Marriott).
26418 # * add/use xterm+tmux chunk from xterm #271 -TD
26419 # * resync xterm-new entry from xterm #271 -TD
26420 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
26421 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
26422 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
26425 # * add kich1 to sun (Yuri Pankov)
26426 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
26429 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
26432 # * minor cleanup of X-terminal emulator section -TD
26433 # * add terminator entry -TD
26434 # * add simpleterm entry -TD
26437 # * add xterm+kbs fragment from xterm #272 -TD
26440 # * add pccon entries for OpenBSD console (Alexei Malinin)
26443 # * corrected old changelog comments -TD
26446 # * add putty-sco -TD
26449 # * add mach-gnu (Samuel Thibault)
26450 # * add mach-gnu-color, tweaks to mach-gnu -TD
26451 # * make sgr for sun-color agree with smso -TD
26452 # * make sgr for prism9 agree with other caps -TD
26453 # * make sgr for icl6404 agree with other caps -TD
26454 # * make sgr for ofcons agree with other caps -TD
26455 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
26456 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
26457 # * make sgr for avt-ns agree with other caps -TD
26460 # * make sgr for xterm-pcolor agree with other caps -TD
26461 # * make sgr for att5425 agree with other caps -TD
26462 # * make sgr for att630 agree with other caps -TD
26463 # * make sgr for linux entries agree with other caps -TD
26464 # * make sgr for tvi9065 agree with other caps -TD
26465 # * make sgr for ncr260vt200an agree with other caps -TD
26466 # * make sgr for ncr160vt100pp agree with other caps -TD
26467 # * make sgr for ncr260vt300an agree with other caps -TD
26468 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
26469 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
26472 # * correct order of use-clauses in st-256color -TD
26475 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
26478 # * document all of the user-defined capabilities in one place -TD
26479 # * add XT to some places to improve usefulness for other applications
26480 # than screen, which would like to pretend that xterm's title is
26481 # a status-line. -TD
26482 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
26483 # of ordering and overrides -TD
26486 # * add msgr to vt420, similar DEC vtXXX entries -TD
26487 # * add several missing vt420 capabilities from vt220 -TD
26488 # * factor out ansi+pp from several entries -TD
26489 # * change xterm+sl and xterm+sl-twm to include only the status-line
26490 # capabilities and not "use=xterm", making them more generally useful
26491 # as building-blocks -TD
26492 # * add dec+sl building block, as example -TD
26495 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
26496 # * add eslok flag to dec+sl -TD
26497 # * dec+sl applies to vt320 and up -TD
26498 # * drop wsl width from xterm+sl -TD
26499 # * reuse xterm+sl in putty and nsca-m -TD
26500 # * add ansi+tabs to vt520 -TD
26501 # * add ansi+enq to vt220-vt520 -TD
26504 # * remove p6 (bold) from opus3n1+ for consistency -TD
26505 # * remove acs stuff from env230 per clues in Ingres termcap -TD
26506 # * modify env230 sgr/sgr0 to match other capabilities -TD
26507 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
26508 # * make sgr for dku7202 agree with other caps -TD
26509 # * make sgr for ibmpc agree with other caps -TD
26510 # * make sgr for tek4107 agree with other caps -TD
26511 # * make sgr for ndr9500 agree with other caps -TD
26512 # * make sgr for sco-ansi agree with other caps -TD
26513 # * make sgr for d410 agree with other caps -TD
26514 # * make sgr for d210 agree with other caps -TD
26515 # * make sgr for d470c, d470c-7b agree with other caps -TD
26518 # * rewrite vt520 entry based on vt420 -TD
26519 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
26522 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
26523 # analysis by Martin Husemann).
26524 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
26525 # Onno van der Linden).
26526 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
26527 # * add kdch1, etc., to qvt108 -TD
26528 # * add dl1/il1 to some entries based on dl/il values -TD
26529 # * add dl to simpleterm -TD
26532 # * modify some older xterm entries to align with xterm source -TD
26533 # * separate "xterm-old" alias from "xterm-r6" -TD
26536 # * add E3 to xterm-basic and putty -TD
26539 # * add nsterm-256color, make this the default nsterm -TD
26540 # * remove bw from nsterm-bce, per testing with tack -TD
26543 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
26544 # (patch by Christian Persch).
26547 # * reviewed vte-2012, reverted most of the change since it was incorrect
26548 # based on testing with tack -TD
26549 # * un-cancel the initc in vte-256color, since this was implemented
26550 # starting with version 0.20 in 2009 -TD
26553 # * correct typo in sgr string for sun-color,
26554 # add bold for consistency with sgr,
26555 # change smso for consistency with sgr -TD
26556 # * correct typo in sgr string for terminator -TD
26557 # * add blink to the attributes masked by ncv in linux-16color (report
26558 # by Benjamin Sittler)
26561 # * change initialization for vt220, similar entries for consistency
26562 # with cursor-key strings (NetBSD #47674) -TD
26563 # * further improvements to linux-16color (Benjamin Sittler)
26566 # * move nsterm-related entries out of "obsolete" section to more
26567 # plausible "ansi consoles" -TD
26568 # * additional cleanup of table-of-contents by reordering -TD
26571 # * added note to clarify Terminal.app's non-emulation of the various
26572 # terminal types listed in the preferences dialog -TD
26575 # * use TS extension to describe xterm's title-escapes -TD
26576 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
26577 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
26578 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
26579 # (Debian #727119).
26580 # * simplify pfkey expression in ansi.sys -TD
26583 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
26586 # * updated notes for wsvt25 based on tack and vttest -TD
26587 # * add teken entry to show actual properties of FreeBSD's "xterm"
26591 # * add terminology entry -TD
26592 # * add mlterm3 entry, use that as "mlterm" -TD
26593 # * inherit mlterm-256color from mlterm -TD
26596 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
26599 # * cancel ccc in putty-256color and konsole-256color for consistency
26600 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
26601 # * add xterm+256setaf building block for various terminals which only
26602 # get the 256-color feature half-implemented -TD
26603 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
26607 # * add vt520ansi (Mike Gran)
26610 # * correct several entries which had termcap-style padding used in
26611 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
26612 # * correct syntax for padding in some entries: dg211, h19 -TD
26613 # * correct ti924-8 which had confused padding versus octal escapes -TD
26614 # * correct padding in sbi entry -TD
26617 # * update xterm-new to xterm patch #305 -TD
26618 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
26619 # (italic). This was a long-ago typo in screen 3.1.1 which was
26620 # overlooked until a few terminal emulators implemented the feature -TD
26623 # > fix regression in screen terminfo entries (reports by Christian
26624 # Ebert, Gabriele Balducci) -TD
26625 # + revert the change to screen; see notes for why this did not work -TD
26626 # + cancel sitm/ritm for entries which extend "screen", to work around
26627 # screen's hardcoded behavior for SGR 3 -TD
26630 # + modify sgr for screen.xterm-new to support dim capability -TD
26631 # + add dim capability to nsterm+7 -TD
26632 # + cancel dim capability for iterm -TD
26633 # + add dim, invis capabilities to vte-2012 -TD
26634 # + add sitm/ritm to konsole-base and mlterm3 -TD
26637 # + add xterm-1005 and xterm-1006 entries, with suggested extension
26638 # capability "xm" -TD
26641 # + update test-report for mrxvt -TD
26644 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
26647 # + reviewed terminology 0.6.1, add function key definitions. None of
26648 # the vt100-compatibility issues were improved -TD
26651 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
26652 # + add several key definitions to nsterm-bce to match preconfigured
26653 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
26656 # + remove unnecessary ';' from E3 capabilities -TD
26657 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
26658 # + split-out recent change to nsterm-bce as nsterm-build326, and add
26659 # nsterm-build342 to reflect changes with successive releases of OSX
26660 # (discussion with Leonardo B Schenkel)
26661 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
26665 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
26666 # + add several screen.XXX entries to support the respective variations
26667 # for 256 colors -TD
26670 # + add putty+fnkeys* building-block entries -TD
26673 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
26674 # + add vte-2014, update vte to use that -TD
26677 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
26678 # from xterm-new (report by Richard Birkett) -TD
26681 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
26682 # + fixes for st 0.5 from testing with tack -TD
26685 # + updated minitel entries to fix kel problem with emacs, and add
26686 # minitel1b-nb (Alexandre Montaron).
26687 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
26688 # + replace some dead URLs in commands with equivalents from the
26689 # Internet Archive -TD
26692 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
26693 # + add keys f12-f124 to pccon+keys (Tati Chevron).
26696 # + fix some inconsistencies in the pccon* entries -TD
26699 # + add viewdata (Alexandre Montaron).
26702 # + tidy up comments about hardcoded 256color palette (report by
26703 # Leonardo Brondani Schenkel) -TD
26704 # + add putty-noapp entry, and amend putty entry to use application mode
26705 # for better consistency with xterm (report by Leonardo Brondani
26709 # + add 'oc' capability to xterm+256color, allowing palette reset for
26713 # + modify linux2.6 entry to improve line-drawing -TD
26714 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
26717 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
26718 # reset palette using "oc" string as in linux -TD
26721 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
26722 # that could be returned -TD
26723 # + added a few capabilities fixed in recent vte -TD
26726 # + correct a typo in interix -TD
26729 # + updated minitel entries to use status line with screen(1), as well as
26730 # printing special G2 videotex chars like french accentuated glyph
26731 # using special cap XC= (patch by Alexandre Montaron).
26734 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
26735 # + correct rs2 string for vt100-nam -TD
26738 # + modify linux-16color to not mask dim, standout or reverse with the
26739 # ncv capability -TD
26740 # + add 0.1sec mandatory delay to flash capabilities using the VT100
26741 # reverse-video control -TD
26742 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
26743 # entry, to avoid conflict with the user-defined mapping. The reset
26744 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
26747 # + merge current st description (report by Harry Gindi) -TD
26750 # + modify flash capability for linux and wyse entries to put the delay
26751 # between the reverse/normal escapes rather than after -TD
26754 # + minor comment-fixes to help automate links to bug-urls -TD
26755 # + add dvtm, dvtm-256color -TD
26756 # + add settings corresponding to xterm-keys option to tmux entry to
26757 # reflect upcoming change to make that option "on" by default
26758 # (patch by Nicholas Marriott).
26759 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
26760 # + add dumb-emacs-ansi -TD
26763 # + correct a few spelling errors in comments -TD
26767 # + add vt100+4bsd building block, use that for older terminals rather
26768 # than "vt100" which is now mostly used as a building block for
26769 # terminal emulators -TD
26770 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
26771 # (report/analysis by Robert King) -TD
26774 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
26775 # + add smso for env230, to match sgr -TD
26776 # + remove p7/protect from sgr in fbterm -TD
26777 # + drop setf/setb from fbterm; setaf/setab are enough -TD
26778 # + make xterm-pcolor sgr consistent with other capabilities -TD
26779 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
26780 # (discussion with Nicholas Marriott)
26783 # + correct missing comma-separator between string capabilities in
26784 # icl6402 and m2-nam -TD
26785 # + update formatting with ncurses 6.0.20170422 -TD
26786 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
26787 # add alias ansiterm (report by Robert King).
26790 # + reformatted using hexadecimal numbers to improve readability -TD
26793 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
26794 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
26795 # + add "rep" to xterm-new, available since 1997/01/26 -TD
26796 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
26800 # + update "iterm" entry -TD
26801 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
26804 # + update notes on user-defined capabilities -TD
26807 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
26810 # + add "op" to xterm+256setaf -TD
26811 # + reviewed terminology 1.0.0 -TD
26812 # + reviewed st 0.7 -TD
26815 # + modify old terminology entry and a few other terminal emulators to
26816 # account for xon -TD
26817 # + correct sgr string for tmux, which used screen's "standout" code
26818 # rather than the standard code (patch by Roman Kagan)
26819 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
26820 # those correspond to the non-sgr settings where they differ, but
26821 # otherwise use ECMA-48 consistently:
26822 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
26823 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
26824 # st-0.7, vi603, vwmterm -TD
26827 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
26828 # blocks from xterm #331 -TD
26829 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
26831 # + modify xterm+256color and xterm+256setaf to use correct number of
26832 # color pairs, for ncurses 6.1 -TD
26833 # + add rs1 capability to xterm-256color -TD
26834 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
26835 # match xterm #272, reflecting packager's changes -TD
26836 # + remove "boolean" Se, Ss from st-0.7 -TD
26839 # + add konsole-direct and st-direct -TD
26840 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
26841 # direct-colors are wanted -TD
26844 # + add vte-direct -TD
26845 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
26849 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
26850 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
26851 # mode does not work with those programs. konsole is debatable -TD
26852 # + add "termite" entry (report by Markus Pfeiffer) -TD
26855 # + trim "XT" from screen entry -TD
26856 # + modify iterm to use xterm+sl-twm building block -TD
26857 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
26858 # konsole's removal in 2008 -TD
26859 # + expanded the history section of konsole to explain its flawed
26860 # imitation of xterm's keyboard -TD
26861 # + use xterm+x11mouse in screen.* entries because screen does not yet
26862 # support xterm's 1006 mode -TD
26863 # + add nsterm-build400 for macOS 10.13 -TD
26864 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
26865 # + update vte to vte-2017 -TD
26866 # + add ecma+strikeout to vte-2017 -TD
26867 # + add iterm2-direct -TD
26868 # + updated teraterm, added teraterm-256color -TD
26869 # + add mlterm-direct -TD
26870 # + add descriptions for ANSI building-blocks -TD
26873 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
26874 # + fix remaining flash capabilities with trailing mandatory delays -TD
26877 # + trim some redundant capabilities from st-0.7 -TD
26878 # + trim unnecessary setf/setb from interix -TD
26881 # + trim spurious whitespace from tmux in 2018-02-24 changes;
26882 # fix some inconsistencies in/between tmux- and iterm2-entries for SGR
26883 # (report by C Anthony Risinger)
26884 # + improve iterm2 using some xterm features which it has adapted -TD
26887 # + add acsc string to vi200 (Nibby Nebbulous)
26888 # add right/down-arrow to vi200's acsc -TD
26891 # + corrected acsc for wy50 -TD
26892 # + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD
26893 # + remove ansi+rep mis-added to interix in 2018-02-23 -TD
26896 # + fix typo in tvi955 -TD
26897 # + corrected acsc for regent60 -TD
26898 # + add alias n7900 -TD
26901 # + corrected acsc for tvi950 -TD
26902 # + remove bogus kf0 from tvi950 -TD
26903 # + added function-key definitions to agree with Televideo 950 manual -TD
26904 # + add bel to tvi950 -TD
26905 # + add shifted function-keys to regent60 -TD
26906 # + renumber regent40 function-keys to match manual -TD
26907 # + add cd (clr_eos) to adds200 -TD
26910 # + add OpenGL clients alacritty and kitty -TD
26911 # + add Smulx for tmux, vte-2018 -Nicholas Marriott
26914 # + fix a typo in comments (Aaron Gyes).
26915 # + add nsterm-build309 to replace nsterm-256color, assigning the latter
26916 # as an alias of nsterm, to make mouse work with nsterm-256color -TD
26917 # + base gnome-256color entry on "gnome", not "vte", for consistency -TD
26920 # + add nsterm-direct -TD
26921 # + use SGR 1006 mouse for konsole-base -TD
26922 # + use SGR 1006 mouse for putty -TD
26923 # + add ti703/ti707, ti703-w/ti707-w (Robert Clausecker)
26926 # + fix typo in adds200 -TD
26929 # + add "screen5", to mention italics (report by Stefan Assmann)
26930 # + modify description of xterm+x11hilite to eliminate unused p5 -TD
26933 # + update xterm-new to xterm patch #345 -TD
26934 # + add/use xterm+keypad in xterm-new (report by Alain D D Williams) -TD
26935 # + update terminator entry -TD
26936 # + remove hard-tabs from ti703 (report by Robert Clausecker)
26937 # + add Smol/Rmol for tmux, vte-2018 -Nicholas Marriott
26940 # + add rs1 to konsole, mlterm -TD
26943 # + add mintty, mintty-direct (Thomas Wolff)
26945 # + comment-out some user-defined capabilities in mintty+common to allow
26946 # builds with existing releases 5.9-6.1 -TD
26949 # + add ms-terminal -TD
26950 # + add vscode, vscode-direct -TD
26951 # + use ecma+index in screen, st -TD
26954 # + add domterm -TD
26955 # + improve comments for recent changes, add alias xterm.js -TD
26958 # + amend the change to screen, because tmux relies upon that entry
26959 # and does not support that feature (Debian #933572) -TD
26960 # + updated ms-terminal entry & notes -TD
26961 # + updated kitty entry & notes -TD
26962 # + updated alacritty+common entry & notes -TD
26963 # + use xterm+sl-twm for consistency -TD
26966 # + correct a comment -TD
26969 # + modify linux-16color to accommodate Linux console driver change in
26970 # early 2018 (report by Dino Petrucci).
26973 # + add "xterm-mono" to help packagers (report by Sven Joachim) -TD
26976 # + drop ich1 from rxvt-basic, Eterm and mlterm to improve compatibility
26977 # with old non-curses programs -TD
26978 # + reviewed st 0.8.2, updated some details -TD
26979 # + use ansi+rep several places -TD
26982 # + update alacritty entries for 0.4.0 (prompted by patch by
26983 # Christian Duerr) -TD
26986 # + spelling fixes per codespell -TD
26987 # + improve xm example for xterm+x11mouse, xterm+sm+1006 -TD
26990 # + improve vt50h and vt52 based on DECScope manual -TD
26991 # + add/use vt52+keypad and vt52-basic -TD
26994 # + use vt52+keypad in xterm-vt52, from xterm #354 -TD
26997 # + use vt100+fnkeys in putty -TD
27000 # + add details on the change to Linux SGR 21 in 2018 -TD
27001 # + add xterm-direct16 and xterm-direct256 -TD
27004 # + fix some dead URLs -TD
27007 # + update notes on vscode / xterm.js -TD
27010 # + re-enable "bel" in konsole-base (report by Nia Huang)
27011 # + add linux-s entry (patch by Alexandre Montaron).
27014 # + add xterm+256color2, xterm+88color2, to deprecate nonstandard usage
27015 # in xterm+256color, xterm+88color -TD
27016 # + add shifted Linux console keys in linux+sfkeys entry for
27017 # screen.linux (report by Alexandre Montaron).
27018 # + use vt100+enq in screen (report by Alexandre Montaron).
27019 # + add screen.linux-s alias (suggested by Alexandre Montaron).
27022 # + fix pound-sign mapping in acsc of linux2.6 entry (report by Ingo
27026 # + correct icl6404 csr (report by Florian Weimer).
27027 # + correct ti916 cup (report by Florian Weimer).
27028 # + improve ndr9500 (report by Florian Weimer).
27031 # + correct description of vt330/vt340 (Ross Combs).
27034 # + update mlterm3 for 3.9.0 (report by Premysl Eric Janouch).
27037 # + add tmux-direct (tmux #2370)
27038 # + simplify mlterm initialization with DECSTR -TD
27039 # + change tmux's kbs to ^? (report by Premysl Eric Janouch)
27042 # + correct sgr in aaa+rv (report by Florian Weimer) -TD
27043 # + fix some sgr inconsistencies in d230c, ibm6153, ibm6154,
27047 # + expanded notes about tek4107 -TD
27050 # + update kitty+common -TD
27051 # + add putty+screen and putty-screen (suggested by Alexandre Montaron).
27054 # + add Smulx to alacritty (Christian Duerr).
27055 # + add rep to PuTTY -TD
27056 # + add putty+keypad -TD
27059 # + correct mlterm3 kf1-kf4 (Debian #975322) -TD
27060 # + add flash to mlterm3 -TD
27063 # + update terminology to 1.8.1 -TD
27066 # + add comment for linux2.6 regarding CONFIG_CONSOLE_TRANSLATIONS
27067 # (report by Patrick McDermott) -TD
27070 # + split-out att610+cvis, vt220+cvis, vt220+cvis8 -TD
27071 # + add vt220-base, for terminal emulators which generally have not
27072 # supported att610's blinking cursor control -TD
27073 # + use vt220+cvis in vt220, etc -TD
27074 # + use att610+cvis, xterm+tmux and ansi+enq in kitty -TD
27075 # + use vt220+cvis in st, terminology, termite since they ignore
27076 # blinking-cursor detail in att610+cvis -TD
27079 # + add/use vt220+pcedit and vt220+vtedit -TD
27080 # + add scrt/securecrt and absolute -TD
27081 # + add nel to xterm-new, though supported since X11R5 -TD
27082 # + add/use xterm+nofkeys -TD
27083 # + move use of ecma+italics from xterm-basic to xterm+nofkeys -TD
27086 # + remove a duplicate "use" in xterm-vt220 -TD
27089 # + correct use-ordering in some xterm-direct flavors -TD
27092 # + add hterm, hterm-256color (Mike Frysinger)
27095 # + use default colors in pccon "op" -TD
27096 # + correct rmacs/smacs in aaa+dec, aaa+rv -TD
27097 # + add hpterm-color2 and hp98550-color (Martin Trusler)
27100 # + correct typo in "vip" comments (report by Nick Black), reviewed this
27101 # against Glink manual -TD
27102 # + fill in some missing pieces for pccon, to make it comparable to the
27106 # + trim "flash" from pccon+base -TD
27107 # + revert change for aaa+rv -TD
27108 # + add workaround for Windows Terminal's problems with CR/LF mapping to
27109 # ms-terminal (patch by Juergen Pfeifer).
27110 # + review/update current Windows Terminal vs ms-terminal -TD
27112 ######## SHANTIH! SHANTIH! SHANTIH!