1 /****************************************************************************
2 * Copyright (c) 1998 Free Software Foundation, Inc. *
4 * Permission is hereby granted, free of charge, to any person obtaining a *
5 * copy of this software and associated documentation files (the *
6 * "Software"), to deal in the Software without restriction, including *
7 * without limitation the rights to use, copy, modify, merge, publish, *
8 * distribute, distribute with modifications, sublicense, and/or sell *
9 * copies of the Software, and to permit persons to whom the Software is *
10 * furnished to do so, subject to the following conditions: *
12 * The above copyright notice and this permission notice shall be included *
13 * in all copies or substantial portions of the Software. *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
16 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
17 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
18 * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
19 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
20 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
21 * THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
23 * Except as contained in this notice, the name(s) of the above copyright *
24 * holders shall not be used in advertising or otherwise to promote the *
25 * sale, use or other dealings in this Software without prior written *
27 ****************************************************************************/
29 /****************************************************************************
30 * Author: Zeyd M. Ben-Halim <zmbenhal@netcom.com> 1992,1995 *
31 * and: Eric S. Raymond <esr@snark.thyrsus.com> *
32 ****************************************************************************/
38 ** The routines for moving the physical cursor and scrolling:
40 ** void _nc_mvcur_init(void)
42 ** void _nc_mvcur_resume(void)
44 ** int mvcur(int old_y, int old_x, int new_y, int new_x)
46 ** void _nc_mvcur_wrap(void)
48 ** Comparisons with older movement optimizers:
49 ** SVr3 curses mvcur() can't use cursor_to_ll or auto_left_margin.
50 ** 4.4BSD curses can't use cuu/cud/cuf/cub/hpa/vpa/tab/cbt for local
51 ** motions. It doesn't use tactics based on auto_left_margin. Weirdly
52 ** enough, it doesn't use its own hardware-scrolling routine to scroll up
53 ** destination lines for out-of-bounds addresses!
54 ** old ncurses optimizer: less accurate cost computations (in fact,
55 ** it was broken and had to be commented out!).
57 ** Compile with -DMAIN to build an interactive tester/timer for the movement
58 ** optimizer. You can use it to investigate the optimizer's behavior.
59 ** You can also use it for tuning the formulas used to determine whether
60 ** or not full optimization is attempted.
62 ** This code has a nasty tendency to find bugs in terminfo entries, because it
63 ** exercises the non-cup movement capabilities heavily. If you think you've
64 ** found a bug, try deleting subsets of the following capabilities (arranged
65 ** in decreasing order of suspiciousness): it, tab, cbt, hpa, vpa, cuu, cud,
66 ** cuf, cub, cuu1, cud1, cuf1, cub1. It may be that one or more are wrong.
68 ** Note: you should expect this code to look like a resource hog in a profile.
69 ** That's because it does a lot of I/O, through the tputs() calls. The I/O
70 ** cost swamps the computation overhead (and as machines get faster, this
71 ** will become even more true). Comments in the test exerciser at the end
72 ** go into detail about tuning and how you can gauge the optimizer's
76 /****************************************************************************
78 * Constants and macros for optimizer tuning.
80 ****************************************************************************/
83 * The average overhead of a full optimization computation in character
84 * transmission times. If it's too high, the algorithm will be a bit
85 * over-biased toward using cup rather than local motions; if it's too
86 * low, the algorithm may spend more time than is strictly optimal
87 * looking for non-cup motions. Profile the optimizer using the `t'
88 * command of the exerciser (see below), and round to the nearest integer.
90 * Yes, I (esr) thought about computing expected overhead dynamically, say
91 * by derivation from a running average of optimizer times. But the
92 * whole point of this optimization is to *decrease* the frequency of
95 #define COMPUTE_OVERHEAD 1 /* I use a 90MHz Pentium @ 9.6Kbps */
98 * LONG_DIST is the distance we consider to be just as costly to move over as a
99 * cup sequence is to emit. In other words, it's the length of a cup sequence
100 * adjusted for average computation overhead. The magic number is the length
101 * of "\033[yy;xxH", the typical cup sequence these days.
103 #define LONG_DIST (8 - COMPUTE_OVERHEAD)
106 * Tell whether a motion is optimizable by local motions. Needs to be cheap to
107 * compute. In general, all the fast moves go to either the right or left edge
108 * of the screen. So any motion to a location that is (a) further away than
109 * LONG_DIST and (b) further inward from the right or left edge than LONG_DIST,
110 * we'll consider nonlocal.
112 #define NOT_LOCAL(fy, fx, ty, tx) ((tx > LONG_DIST) && (tx < screen_lines - 1 - LONG_DIST) && (abs(ty-fy) + abs(tx-fx) > LONG_DIST))
114 /****************************************************************************
116 * External interfaces
118 ****************************************************************************/
121 * For this code to work OK, the following components must live in the
124 * int _char_padding; // cost of character put
125 * int _cr_cost; // cost of (carriage_return)
126 * int _cup_cost; // cost of (cursor_address)
127 * int _home_cost; // cost of (cursor_home)
128 * int _ll_cost; // cost of (cursor_to_ll)
130 * int _ht_cost; // cost of (tab)
131 * int _cbt_cost; // cost of (back_tab)
132 *#endif USE_HARD_TABS
133 * int _cub1_cost; // cost of (cursor_left)
134 * int _cuf1_cost; // cost of (cursor_right)
135 * int _cud1_cost; // cost of (cursor_down)
136 * int _cuu1_cost; // cost of (cursor_up)
137 * int _cub_cost; // cost of (parm_cursor_left)
138 * int _cuf_cost; // cost of (parm_cursor_right)
139 * int _cud_cost; // cost of (parm_cursor_down)
140 * int _cuu_cost; // cost of (parm_cursor_up)
141 * int _hpa_cost; // cost of (column_address)
142 * int _vpa_cost; // cost of (row_address)
143 * int _ech_cost; // cost of (erase_chars)
144 * int _rep_cost; // cost of (repeat_char)
146 * The USE_HARD_TABS switch controls whether it is reliable to use tab/backtabs
147 * for local motions. On many systems, it's not, due to uncertainties about
148 * tab delays and whether or not tabs will be expanded in raw mode. If you
149 * have parm_right_cursor, tab motions don't win you a lot anyhow.
152 #include <curses.priv.h>
156 MODULE_ID("$Id: lib_mvcur.c,v 1.60 1999/10/03 01:08:27 Alexander.V.Lukyanov Exp $")
158 #define STRLEN(s) (s != 0) ? strlen(s) : 0
160 #define CURRENT_ATTR SP->_current_attr /* current phys attribute */
161 #define CURRENT_ROW SP->_cursrow /* phys cursor row */
162 #define CURRENT_COLUMN SP->_curscol /* phys cursor column */
163 #define REAL_ATTR SP->_current_attr /* phys current attribute */
164 #define WANT_CHAR(y, x) SP->_newscr->_line[y].text[x] /* desired state */
165 #define BAUDRATE cur_term->_baudrate /* bits per second */
167 #if defined(MAIN) || defined(NCURSES_TEST)
168 #include <sys/time.h>
170 static bool profiling = FALSE;
176 static int normalized_cost(const char *const cap, int affcnt);
179 char * _nc_strstr(const char *haystack, const char *needle)
181 size_t len1 = strlen(haystack);
182 size_t len2 = strlen(needle);
185 while ((len1 != 0) && (len1-- >= len2)) {
186 if (!strncmp(haystack, needle, len2)) {
196 /****************************************************************************
198 * Initialization/wrapup (including cost pre-computation)
200 ****************************************************************************/
204 trace_cost_of(const char *capname, const char *cap, int affcnt)
206 int result = _nc_msec_cost(cap,affcnt);
207 TR(TRACE_CHARPUT|TRACE_MOVE, ("CostOf %s %d", capname, result));
210 #define CostOf(cap,affcnt) trace_cost_of(#cap,cap,affcnt);
213 trace_normalized_cost(const char *capname, const char *cap, int affcnt)
215 int result = normalized_cost(cap,affcnt);
216 TR(TRACE_CHARPUT|TRACE_MOVE, ("NormalizedCost %s %d", capname, result));
219 #define NormalizedCost(cap,affcnt) trace_normalized_cost(#cap,cap,affcnt);
223 #define CostOf(cap,affcnt) _nc_msec_cost(cap,affcnt);
224 #define NormalizedCost(cap,affcnt) normalized_cost(cap,affcnt);
228 int _nc_msec_cost(const char *const cap, int affcnt)
229 /* compute the cost of a given operation */
238 for (cp = cap; *cp; cp++)
240 /* extract padding, either mandatory or required */
241 if (cp[0] == '$' && cp[1] == '<' && strchr(cp, '>'))
245 for (cp += 2; *cp != '>'; cp++)
248 number = number * 10 + (*cp - '0');
251 else if (*cp == '.' && (*++cp != '>') && isdigit(*cp))
252 number += (*cp - '0') / 10.0;
255 cum_cost += number * 10;
258 cum_cost += SP->_char_padding;
261 return((int)cum_cost);
265 static int normalized_cost(const char *const cap, int affcnt)
266 /* compute the effective character-count for an operation (round up) */
268 int cost = _nc_msec_cost(cap, affcnt);
269 if (cost != INFINITY)
270 cost = (cost + SP->_char_padding - 1) / SP->_char_padding;
274 static void reset_scroll_region(void)
275 /* Set the scroll-region to a known state (the default) */
277 if (change_scroll_region)
279 TPUTS_TRACE("change_scroll_region");
280 putp(tparm(change_scroll_region, 0, screen_lines - 1));
284 void _nc_mvcur_resume(void)
285 /* what to do at initialization time and after each shellout */
287 /* initialize screen for cursor access */
290 TPUTS_TRACE("enter_ca_mode");
295 * Doing this here rather than in _nc_mvcur_wrap() ensures that
296 * ncurses programs will see a reset scroll region even if a
297 * program that messed with it died ungracefully.
299 * This also undoes the effects of terminal init strings that assume
300 * they know the screen size. This is useful when you're running
301 * a vt100 emulation through xterm.
303 reset_scroll_region();
304 SP->_cursrow = SP->_curscol = -1;
306 /* restore cursor shape */
307 if (SP->_cursor != -1)
309 int cursor = SP->_cursor;
315 void _nc_mvcur_init(void)
316 /* initialize the cost structure */
319 * 9 = 7 bits + 1 parity + 1 stop.
321 SP->_char_padding = (9 * 1000 * 10) / (BAUDRATE > 0 ? BAUDRATE : 9600);
322 if (SP->_char_padding <= 0)
323 SP->_char_padding = 1; /* must be nonzero */
324 TR(TRACE_CHARPUT|TRACE_MOVE, ("char_padding %d msecs", SP->_char_padding));
326 /* non-parameterized local-motion strings */
327 SP->_cr_cost = CostOf(carriage_return, 0);
328 SP->_home_cost = CostOf(cursor_home, 0);
329 SP->_ll_cost = CostOf(cursor_to_ll, 0);
331 SP->_ht_cost = CostOf(tab, 0);
332 SP->_cbt_cost = CostOf(back_tab, 0);
333 #endif /* USE_HARD_TABS */
334 SP->_cub1_cost = CostOf(cursor_left, 0);
335 SP->_cuf1_cost = CostOf(cursor_right, 0);
336 SP->_cud1_cost = CostOf(cursor_down, 0);
337 SP->_cuu1_cost = CostOf(cursor_up, 0);
339 SP->_smir_cost = CostOf(enter_insert_mode, 0);
340 SP->_rmir_cost = CostOf(exit_insert_mode, 0);
342 if (insert_padding) {
343 SP->_ip_cost = CostOf(insert_padding, 0);
347 * Assumption: if the terminal has memory_relative addressing, the
348 * initialization strings or smcup will set single-page mode so we
349 * can treat it like absolute screen addressing. This seems to be true
350 * for all cursor_mem_address terminal types in the terminfo database.
352 SP->_address_cursor = cursor_address ? cursor_address : cursor_mem_address;
355 * Parametrized local-motion strings. This static cost computation
356 * depends on the following assumptions:
358 * (1) They never have * padding. In the entire master terminfo database
359 * as of March 1995, only the obsolete Zenith Z-100 pc violates this.
360 * (Proportional padding is found mainly in insert, delete and scroll
363 * (2) The average case of cup has two two-digit parameters. Strictly,
364 * the average case for a 24 * 80 screen has ((10*10*(1 + 1)) +
365 * (14*10*(1 + 2)) + (10*70*(2 + 1)) + (14*70*4)) / (24*80) = 3.458
366 * digits of parameters. On a 25x80 screen the average is 3.6197.
367 * On larger screens the value gets much closer to 4.
369 * (3) The average case of cub/cuf/hpa/ech/rep has 2 digits of parameters
370 * (strictly, (((10 * 1) + (70 * 2)) / 80) = 1.8750).
372 * (4) The average case of cud/cuu/vpa has 2 digits of parameters
373 * (strictly, (((10 * 1) + (14 * 2)) / 24) = 1.5833).
375 * All these averages depend on the assumption that all parameter values
376 * are equally probable.
378 SP->_cup_cost = CostOf(tparm(SP->_address_cursor, 23, 23), 1);
379 SP->_cub_cost = CostOf(tparm(parm_left_cursor, 23), 1);
380 SP->_cuf_cost = CostOf(tparm(parm_right_cursor, 23), 1);
381 SP->_cud_cost = CostOf(tparm(parm_down_cursor, 23), 1);
382 SP->_cuu_cost = CostOf(tparm(parm_up_cursor, 23), 1);
383 SP->_hpa_cost = CostOf(tparm(column_address, 23), 1);
384 SP->_vpa_cost = CostOf(tparm(row_address, 23), 1);
386 /* non-parameterized screen-update strings */
387 SP->_ed_cost = NormalizedCost(clr_eos, 1);
388 SP->_el_cost = NormalizedCost(clr_eol, 1);
389 SP->_el1_cost = NormalizedCost(clr_bol, 1);
390 SP->_dch1_cost = NormalizedCost(delete_character, 1);
391 SP->_ich1_cost = NormalizedCost(insert_character, 1);
393 /* parameterized screen-update strings */
394 SP->_dch_cost = NormalizedCost(tparm(parm_dch, 23), 1);
395 SP->_ich_cost = NormalizedCost(tparm(parm_ich, 23), 1);
396 SP->_ech_cost = NormalizedCost(tparm(erase_chars, 23), 1);
397 SP->_rep_cost = NormalizedCost(tparm(repeat_char, ' ', 23), 1);
399 SP->_cup_ch_cost = NormalizedCost(tparm(SP->_address_cursor, 23, 23), 1);
400 SP->_hpa_ch_cost = NormalizedCost(tparm(column_address, 23), 1);
402 /* pre-compute some capability lengths */
403 SP->_carriage_return_length = STRLEN(carriage_return);
404 SP->_cursor_home_length = STRLEN(cursor_home);
405 SP->_cursor_to_ll_length = STRLEN(cursor_to_ll);
408 * If save_cursor is used within enter_ca_mode, we should not use it for
409 * scrolling optimization, since the corresponding restore_cursor is not
410 * nested on the various terminals (vt100, xterm, etc.) which use this
414 && enter_ca_mode != 0
415 && strstr(enter_ca_mode, save_cursor) != 0) {
416 T(("...suppressed sc/rc capability due to conflict with smcup/rmcup"));
422 * A different, possibly better way to arrange this would be to set
423 * SP->_endwin = TRUE at window initialization time and let this be
424 * called by doupdate's return-from-shellout code.
429 void _nc_mvcur_wrap(void)
430 /* wrap up cursor-addressing mode */
432 /* leave cursor at screen bottom */
433 mvcur(-1, -1, screen_lines - 1, 0);
435 /* set cursor to normal mode */
436 if (SP->_cursor != -1)
441 TPUTS_TRACE("exit_ca_mode");
445 * Reset terminal's tab counter. There's a long-time bug that
446 * if you exit a "curses" program such as vi or more, tab
447 * forward, and then backspace, the cursor doesn't go to the
448 * right place. The problem is that the kernel counts the
449 * escape sequences that reset things as column positions.
450 * Utter a \r to reset this invisibly.
455 /****************************************************************************
457 * Optimized cursor movement
459 ****************************************************************************/
462 * Perform repeated-append, returning cost
465 repeated_append (int total, int num, int repeat, char *dst, const char *src)
467 register size_t src_len = strlen(src);
468 register size_t dst_len = STRLEN(dst);
470 if ((dst_len + repeat * src_len) < OPT_SIZE-1) {
471 total += (num * repeat);
474 while (repeat-- > 0) {
475 (void) strcpy(dst, src);
486 #define NEXTTAB(fr) (fr + init_tabs - (fr % init_tabs))
489 * Assume back_tab (CBT) does not wrap backwards at the left margin, return
490 * a negative value at that point to simplify the loop.
492 #define LASTTAB(fr) ((fr > 0) ? ((fr - 1) / init_tabs) * init_tabs : -1)
494 /* Note: we'd like to inline this for speed, but GNU C barfs on the attempt. */
497 relative_move(char *result, int from_y,int from_x,int to_y,int to_x, bool ovw)
498 /* move via local motions (cuu/cuu1/cud/cud1/cub1/cub/cuf1/cuf/vpa/hpa) */
500 int n, vcost = 0, hcost = 0;
512 (void) strcpy(result, tparm(row_address, to_y));
513 vcost = SP->_vpa_cost;
520 if (parm_down_cursor && SP->_cud_cost < vcost)
523 (void) strcpy(result, tparm(parm_down_cursor, n));
524 vcost = SP->_cud_cost;
527 if (cursor_down && (n * SP->_cud1_cost < vcost))
531 vcost = repeated_append(0, SP->_cud1_cost, n, result, cursor_down);
534 else /* (to_y < from_y) */
538 if (parm_up_cursor && SP->_cup_cost < vcost)
541 (void) strcpy(result, tparm(parm_up_cursor, n));
542 vcost = SP->_cup_cost;
545 if (cursor_up && (n * SP->_cuu1_cost < vcost))
549 vcost = repeated_append(0, SP->_cuu1_cost, n, result, cursor_up);
553 if (vcost == INFINITY)
558 result += strlen(result);
569 (void) strcpy(result, tparm(column_address, to_x));
570 hcost = SP->_hpa_cost;
577 if (parm_right_cursor && SP->_cuf_cost < hcost)
580 (void) strcpy(result, tparm(parm_right_cursor, n));
581 hcost = SP->_cuf_cost;
591 /* use hard tabs, if we have them, to do as much as possible */
592 if (init_tabs > 0 && tab)
596 for (fr = from_x; (nxt = NEXTTAB(fr)) <= to_x; fr = nxt)
598 lhcost = repeated_append(lhcost, SP->_ht_cost, 1, str, tab);
599 if (lhcost == INFINITY)
606 #endif /* USE_HARD_TABS */
608 #if defined(REAL_ATTR) && defined(WANT_CHAR)
611 * If we're allowing BSD-style padding in tputs, don't generate
612 * a string with a leading digit. Otherwise, that will be
613 * interpreted as a padding value rather than sent to the
620 && isdigit(TextOf(WANT_CHAR(to_y, from_x))))
624 * If we have no attribute changes, overwrite is cheaper.
625 * Note: must suppress this by passing in ovw = FALSE whenever
626 * WANT_CHAR would return invalid data. In particular, this
627 * is true between the time a hardware scroll has been done
628 * and the time the structure WANT_CHAR would access has been
635 for (i = 0; i < n; i++)
636 if ((WANT_CHAR(to_y, from_x + i) & A_ATTRIBUTES) != CURRENT_ATTR)
647 sp = str + strlen(str);
649 for (i = 0; i < n; i++)
650 *sp++ = WANT_CHAR(to_y, from_x + i);
652 lhcost += n * SP->_char_padding;
655 #endif /* defined(REAL_ATTR) && defined(WANT_CHAR) */
657 lhcost = repeated_append(lhcost, SP->_cuf1_cost, n, str, cursor_right);
663 (void) strcpy(result, str);
668 else /* (to_x < from_x) */
672 if (parm_left_cursor && SP->_cub_cost < hcost)
675 (void) strcpy(result, tparm(parm_left_cursor, n));
676 hcost = SP->_cub_cost;
686 if (init_tabs > 0 && back_tab)
690 for (fr = from_x; (nxt = LASTTAB(fr)) >= to_x; fr = nxt)
692 lhcost = repeated_append(lhcost, SP->_cbt_cost, 1, str, back_tab);
693 if (lhcost == INFINITY)
699 #endif /* USE_HARD_TABS */
701 lhcost = repeated_append(lhcost, SP->_cub1_cost, n, str, cursor_left);
706 (void) strcpy(result, str);
712 if (hcost == INFINITY)
716 return(vcost + hcost);
718 #endif /* !NO_OPTIMIZE */
721 * With the machinery set up above, it's conceivable that
722 * onscreen_mvcur could be modified into a recursive function that does
723 * an alpha-beta search of motion space, as though it were a chess
724 * move tree, with the weight function being boolean and the search
725 * depth equated to length of string. However, this would jack up the
726 * computation cost a lot, especially on terminals without a cup
727 * capability constraining the search tree depth. So we settle for
728 * the simpler method below.
732 onscreen_mvcur(int yold,int xold,int ynew,int xnew, bool ovw)
733 /* onscreen move from (yold, xold) to (ynew, xnew) */
735 char use[OPT_SIZE], *sp;
736 int tactic = 0, newcost, usecost = INFINITY;
739 #if defined(MAIN) || defined(NCURSES_TEST)
740 struct timeval before, after;
742 gettimeofday(&before, NULL);
745 /* tactic #0: use direct cursor addressing */
746 sp = tparm(SP->_address_cursor, ynew, xnew);
750 (void) strcpy(use, sp);
751 usecost = SP->_cup_cost;
753 #if defined(TRACE) || defined(NCURSES_TEST)
754 if (!(_nc_optimize_enable & OPTIMIZE_MVCUR))
759 * We may be able to tell in advance that the full optimization
760 * will probably not be worth its overhead. Also, don't try to
761 * use local movement if the current attribute is anything but
762 * A_NORMAL...there are just too many ways this can screw up
763 * (like, say, local-movement \n getting mapped to some obscure
764 * character because A_ALTCHARSET is on).
766 if (yold == -1 || xold == -1 || NOT_LOCAL(yold, xold, ynew, xnew))
768 #if defined(MAIN) || defined(NCURSES_TEST)
771 (void) fputs("nonlocal\n", stderr);
772 goto nonlocal; /* always run the optimizer if profiling */
781 /* tactic #1: use local movement */
782 if (yold != -1 && xold != -1
783 && ((newcost=relative_move(NULL, yold, xold, ynew, xnew, ovw))!=INFINITY)
784 && newcost < usecost)
790 /* tactic #2: use carriage-return + local movement */
791 if (yold != -1 && carriage_return
792 && ((newcost=relative_move(NULL, yold,0,ynew,xnew, ovw)) != INFINITY)
793 && SP->_cr_cost + newcost < usecost)
796 usecost = SP->_cr_cost + newcost;
799 /* tactic #3: use home-cursor + local movement */
801 && ((newcost=relative_move(NULL, 0, 0, ynew, xnew, ovw)) != INFINITY)
802 && SP->_home_cost + newcost < usecost)
805 usecost = SP->_home_cost + newcost;
808 /* tactic #4: use home-down + local movement */
810 && ((newcost=relative_move(NULL, screen_lines-1, 0, ynew, xnew, ovw)) != INFINITY)
811 && SP->_ll_cost + newcost < usecost)
814 usecost = SP->_ll_cost + newcost;
818 * tactic #5: use left margin for wrap to right-hand side,
819 * unless strange wrap behavior indicated by xenl might hose us.
821 t5_cr_cost = (xold>0 ? SP->_cr_cost : 0);
822 if (auto_left_margin && !eat_newline_glitch
823 && yold > 0 && cursor_left
824 && ((newcost=relative_move(NULL, yold-1, screen_columns-1, ynew, xnew, ovw)) != INFINITY)
825 && t5_cr_cost + SP->_cub1_cost + newcost < usecost)
828 usecost = t5_cr_cost + SP->_cub1_cost + newcost;
832 * These cases are ordered by estimated relative frequency.
837 (void) relative_move(use, yold, xold, ynew, xnew, ovw);
838 else if (tactic == 2)
840 (void) strcpy(use, carriage_return);
841 (void) relative_move(use + SP->_carriage_return_length,
842 yold,0,ynew,xnew, ovw);
844 else if (tactic == 3)
846 (void) strcpy(use, cursor_home);
847 (void) relative_move(use + SP->_cursor_home_length,
848 0, 0, ynew, xnew, ovw);
850 else if (tactic == 4)
852 (void) strcpy(use, cursor_to_ll);
853 (void) relative_move(use + SP->_cursor_to_ll_length,
854 screen_lines-1, 0, ynew, xnew, ovw);
856 else /* if (tactic == 5) */
860 (void) strcat(use, carriage_return);
861 (void) strcat(use, cursor_left);
862 (void) relative_move(use + strlen(use),
863 yold-1, screen_columns-1, ynew, xnew, ovw);
866 #endif /* !NO_OPTIMIZE */
868 #if defined(MAIN) || defined(NCURSES_TEST)
869 gettimeofday(&after, NULL);
870 diff = after.tv_usec - before.tv_usec
871 + (after.tv_sec - before.tv_sec) * 1000000;
873 (void) fprintf(stderr, "onscreen: %d msec, %f 28.8Kbps char-equivalents\n",
874 (int)diff, diff/288);
878 if (usecost != INFINITY)
880 TPUTS_TRACE("mvcur");
881 tputs(use, 1, _nc_outch);
888 int mvcur(int yold, int xold, int ynew, int xnew)
889 /* optimized cursor move from (yold, xold) to (ynew, xnew) */
891 TR(TRACE_MOVE, ("mvcur(%d,%d,%d,%d) called", yold, xold, ynew, xnew));
893 if (yold == ynew && xold == xnew)
897 * Most work here is rounding for terminal boundaries getting the
898 * column position implied by wraparound or the lack thereof and
899 * rolling up the screen to get ynew on the screen.
902 if (xnew >= screen_columns)
904 ynew += xnew / screen_columns;
905 xnew %= screen_columns;
907 if (xold >= screen_columns)
911 l = (xold + 1) / screen_columns;
913 if (yold >= screen_lines)
914 l -= (yold - screen_lines - 1);
919 TPUTS_TRACE("newline");
920 tputs(newline, 0, _nc_outch);
929 TPUTS_TRACE("carriage_return");
930 tputs(carriage_return, 0, _nc_outch);
939 if (yold > screen_lines - 1)
940 yold = screen_lines - 1;
941 if (ynew > screen_lines - 1)
942 ynew = screen_lines - 1;
944 /* destination location is on screen now */
945 return(onscreen_mvcur(yold, xold, ynew, xnew, TRUE));
948 #if defined(TRACE) || defined(NCURSES_TEST)
949 int _nc_optimize_enable = OPTIMIZE_ALL;
952 #if defined(MAIN) || defined(NCURSES_TEST)
953 /****************************************************************************
955 * Movement optimizer test code
957 ****************************************************************************/
960 #include <dump_entry.h>
962 const char *_nc_progname = "mvcur";
964 static unsigned long xmits;
966 int tputs(const char *string, int affcnt GCC_UNUSED, int (*outc)(int) GCC_UNUSED)
967 /* stub tputs() that dumps sequences in a visible form */
970 xmits += strlen(string);
972 (void) fputs(_nc_visbuf(string), stdout);
976 int putp(const char *string)
978 return(tputs(string, 1, _nc_outch));
981 int _nc_outch(int ch)
987 static char tname[MAX_ALIAS];
989 static void load_term(void)
991 (void) setupterm(tname, STDOUT_FILENO, NULL);
994 static int roll(int n)
998 i = (RAND_MAX / n) * n;
999 while ((j = rand()) >= i)
1004 int main(int argc GCC_UNUSED, char *argv[] GCC_UNUSED)
1006 (void) strcpy(tname, termname());
1008 _nc_setupscreen(lines, columns, stdout);
1014 (void) puts("The mvcur tester. Type ? for help");
1016 fputs("smcup:", stdout);
1021 int fy, fx, ty, tx, n, i;
1022 char buf[BUFSIZ], capname[BUFSIZ];
1024 (void) fputs("> ", stdout);
1025 (void) fgets(buf, sizeof(buf), stdin);
1029 (void) puts("? -- display this help message");
1030 (void) puts("fy fx ty tx -- (4 numbers) display (fy,fx)->(ty,tx) move");
1031 (void) puts("s[croll] n t b m -- display scrolling sequence");
1032 (void) printf("r[eload] -- reload terminal info for %s\n", termname());
1033 (void) puts("l[oad] <term> -- load terminal info for type <term>");
1034 (void) puts("d[elete] <cap> -- delete named capability");
1035 (void) puts("i[nspect] -- display terminal capabilities");
1036 (void) puts("c[ost] -- dump cursor-optimization cost table");
1037 (void) puts("o[optimize] -- toggle movement optimization");
1038 (void) puts("t[orture] <num> -- torture-test with <num> random moves");
1039 (void) puts("q[uit] -- quit the program");
1041 else if (sscanf(buf, "%d %d %d %d", &fy, &fx, &ty, &tx) == 4)
1043 struct timeval before, after;
1047 gettimeofday(&before, NULL);
1048 mvcur(fy, fx, ty, tx);
1049 gettimeofday(&after, NULL);
1051 printf("\" (%ld msec)\n",
1052 (long)(after.tv_usec - before.tv_usec + (after.tv_sec - before.tv_sec) * 1000000));
1054 else if (sscanf(buf, "s %d %d %d %d", &fy, &fx, &ty, &tx) == 4)
1056 struct timeval before, after;
1060 gettimeofday(&before, NULL);
1061 _nc_scrolln(fy, fx, ty, tx);
1062 gettimeofday(&after, NULL);
1064 printf("\" (%ld msec)\n",
1065 (long)(after.tv_usec - before.tv_usec + (after.tv_sec - before.tv_sec) * 1000000));
1067 else if (buf[0] == 'r')
1069 (void) strcpy(tname, termname());
1072 else if (sscanf(buf, "l %s", tname) == 1)
1076 else if (sscanf(buf, "d %s", capname) == 1)
1078 struct name_table_entry const *np = _nc_find_entry(capname,
1079 _nc_info_hash_table);
1082 (void) printf("No such capability as \"%s\"\n", capname);
1085 switch(np->nte_type)
1088 cur_term->type.Booleans[np->nte_index] = FALSE;
1089 (void) printf("Boolean capability `%s' (%d) turned off.\n",
1090 np->nte_name, np->nte_index);
1094 cur_term->type.Numbers[np->nte_index] = -1;
1095 (void) printf("Number capability `%s' (%d) set to -1.\n",
1096 np->nte_name, np->nte_index);
1100 cur_term->type.Strings[np->nte_index] = (char *)NULL;
1101 (void) printf("String capability `%s' (%d) deleted.\n",
1102 np->nte_name, np->nte_index);
1107 else if (buf[0] == 'i')
1109 dump_init((char *)NULL, F_TERMINFO, S_TERMINFO, 70, 0, FALSE);
1110 dump_entry(&cur_term->type, FALSE, TRUE, 0);
1113 else if (buf[0] == 'o')
1115 if (_nc_optimize_enable & OPTIMIZE_MVCUR)
1117 _nc_optimize_enable &=~ OPTIMIZE_MVCUR;
1118 (void) puts("Optimization is now off.");
1122 _nc_optimize_enable |= OPTIMIZE_MVCUR;
1123 (void) puts("Optimization is now on.");
1127 * You can use the `t' test to profile and tune the movement
1128 * optimizer. Use iteration values in three digits or more.
1129 * At above 5000 iterations the profile timing averages are stable
1130 * to within a millisecond or three.
1132 * The `overhead' field of the report will help you pick a
1133 * COMPUTE_OVERHEAD figure appropriate for your processor and
1134 * expected line speed. The `total estimated time' is
1135 * computation time plus a character-transmission time
1136 * estimate computed from the number of transmits and the baud
1139 * Use this together with the `o' command to get a read on the
1140 * optimizer's effectiveness. Compare the total estimated times
1141 * for `t' runs of the same length in both optimized and un-optimized
1142 * modes. As long as the optimized times are less, the optimizer
1145 else if (sscanf(buf, "t %d", &n) == 1)
1147 float cumtime = 0, perchar;
1148 int speeds[] = {2400, 9600, 14400, 19200, 28800, 38400, 0};
1150 srand((unsigned)(getpid() + time((time_t *)0)));
1153 for (i = 0; i < n; i++)
1156 * This does a move test between two random locations,
1157 * Random moves probably short-change the optimizer,
1158 * which will work better on the short moves probably
1159 * typical of doupdate()'s usage pattern. Still,
1160 * until we have better data...
1162 #ifdef FIND_COREDUMP
1163 int from_y = roll(lines);
1164 int to_y = roll(lines);
1165 int from_x = roll(columns);
1166 int to_x = roll(columns);
1168 printf("(%d,%d) -> (%d,%d)\n", from_y, from_x, to_y, to_x);
1169 mvcur(from_y, from_x, to_y, to_x);
1171 mvcur(roll(lines), roll(columns), roll(lines), roll(columns));
1172 #endif /* FIND_COREDUMP */
1179 * Average milliseconds per character optimization time.
1180 * This is the key figure to watch when tuning the optimizer.
1182 perchar = cumtime / n;
1184 (void) printf("%d moves (%ld chars) in %d msec, %f msec each:\n",
1185 n, xmits, (int)cumtime, perchar);
1187 for (i = 0; speeds[i]; i++)
1190 * Total estimated time for the moves, computation and
1191 * transmission both. Transmission time is an estimate
1192 * assuming 9 bits/char, 8 bits + 1 stop bit.
1194 float totalest = cumtime + xmits * 9 * 1e6 / speeds[i];
1197 * Per-character optimization overhead in character transmits
1198 * at the current speed. Round this to the nearest integer
1199 * to figure COMPUTE_OVERHEAD for the speed.
1201 float overhead = speeds[i] * perchar / 1e6;
1203 (void) printf("%6d bps: %3.2f char-xmits overhead; total estimated time %15.2f\n",
1204 speeds[i], overhead, totalest);
1207 else if (buf[0] == 'c')
1209 (void) printf("char padding: %d\n", SP->_char_padding);
1210 (void) printf("cr cost: %d\n", SP->_cr_cost);
1211 (void) printf("cup cost: %d\n", SP->_cup_cost);
1212 (void) printf("home cost: %d\n", SP->_home_cost);
1213 (void) printf("ll cost: %d\n", SP->_ll_cost);
1215 (void) printf("ht cost: %d\n", SP->_ht_cost);
1216 (void) printf("cbt cost: %d\n", SP->_cbt_cost);
1217 #endif /* USE_HARD_TABS */
1218 (void) printf("cub1 cost: %d\n", SP->_cub1_cost);
1219 (void) printf("cuf1 cost: %d\n", SP->_cuf1_cost);
1220 (void) printf("cud1 cost: %d\n", SP->_cud1_cost);
1221 (void) printf("cuu1 cost: %d\n", SP->_cuu1_cost);
1222 (void) printf("cub cost: %d\n", SP->_cub_cost);
1223 (void) printf("cuf cost: %d\n", SP->_cuf_cost);
1224 (void) printf("cud cost: %d\n", SP->_cud_cost);
1225 (void) printf("cuu cost: %d\n", SP->_cuu_cost);
1226 (void) printf("hpa cost: %d\n", SP->_hpa_cost);
1227 (void) printf("vpa cost: %d\n", SP->_vpa_cost);
1229 else if (buf[0] == 'x' || buf[0] == 'q')
1232 (void) puts("Invalid command.");
1235 (void) fputs("rmcup:", stdout);
1244 /* lib_mvcur.c ends here */