<!--
****************************************************************************
- * Copyright (c) 1998-2013,2016 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2016,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: tset.1,v 1.43 2016/08/06 23:16:39 tom Exp @
+ * @Id: tset.1,v 1.49 2017/04/16 21:30:15 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
("?"), the user is prompted for confirmation of the termi-
nal type. An empty response confirms the type, or,
another type can be entered to specify a new type. Once
- the terminal type has been determined, the terminfo entry
- for the terminal is retrieved. If no terminfo entry is
- found for the type, the user is prompted for another ter-
- minal type.
+ the terminal type has been determined, the terminal
+ description for the terminal is retrieved. If no terminal
+ description is found for the type, the user is prompted
+ for another terminal type.
- Once the terminfo entry is retrieved, the window size,
- backspace, interrupt and line kill characters (among many
- other things) are set and the terminal and tab initializa-
- tion strings are sent to the standard error output.
- Finally, if the erase, interrupt and line kill characters
- have changed, or are not set to their default values,
- their values are displayed to the standard error output.
+ Once the terminal description is retrieved,
+
+ <STRONG>o</STRONG> if the "<STRONG>-w</STRONG>" option is enabled, <STRONG>tset</STRONG> may update the
+ terminal's window size.
+
+ If the window size cannot be obtained from the operat-
+ ing system, but the terminal description (or environ-
+ ment, e.g., <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> variables specify this),
+ use this to set the operating system's notion of the
+ window size.
+
+ <STRONG>o</STRONG> if the "<STRONG>-c</STRONG>" option is enabled, the backspace, inter-
+ rupt and line kill characters (among many other
+ things) are set
+
+ <STRONG>o</STRONG> unless the "<STRONG>-I</STRONG>" option is enabled, the terminal and
+ tab <EM>initialization</EM> strings are sent to the standard
+ error output, and <STRONG>tset</STRONG> waits one second (in case a
+ hardware reset was issued).
+
+ <STRONG>o</STRONG> Finally, if the erase, interrupt and line kill charac-
+ ters have changed, or are not set to their default
+ values, their values are displayed to the standard
+ error output.
</PRE><H3><a name="h3-reset---reinitialization">reset - reinitialization</a></H3><PRE>
- When invoked as <STRONG>reset</STRONG>, <STRONG>tset</STRONG> sets cooked and echo modes,
- turns off cbreak and raw modes, turns on newline transla-
- tion and resets any unset special characters to their
- default values before doing the terminal initialization
- described above. This is useful after a program dies
- leaving a terminal in an abnormal state. Note, you may
- have to type
+ When invoked as <STRONG>reset</STRONG>, <STRONG>tset</STRONG> sets the terminal modes to
+ "sane" values:
+
+ <STRONG>o</STRONG> sets cooked and echo modes,
+
+ <STRONG>o</STRONG> turns off cbreak and raw modes,
+
+ <STRONG>o</STRONG> turns on newline translation and
- <EM><LF></EM><STRONG>reset</STRONG><EM><LF></EM>
+ <STRONG>o</STRONG> resets any unset special characters to their default
+ values
- (the line-feed character is normally control-J) to get the
- terminal to work, as carriage-return may no longer work in
- the abnormal state. Also, the terminal will often not
- echo the command.
+ before doing the terminal initialization described above.
+ Also, rather than using the terminal <EM>initialization</EM>
+ strings, it uses the terminal <EM>reset</EM> strings.
+
+ The <STRONG>reset</STRONG> command is useful after a program dies leaving a
+ terminal in an abnormal state:
+
+ <STRONG>o</STRONG> you may have to type
+
+ <EM><LF></EM><STRONG>reset</STRONG><EM><LF></EM>
+
+ (the line-feed character is normally control-J) to get
+ the terminal to work, as carriage-return may no longer
+ work in the abnormal state.
+
+ <STRONG>o</STRONG> Also, the terminal will often not echo the command.
</PRE><H2><a name="h2-OPTIONS">OPTIONS</a></H2><PRE>
<STRONG>-k</STRONG> Set the line kill character to <EM>ch</EM>.
- <STRONG>-m</STRONG> Specify a mapping from a port type to a terminal.
+ <STRONG>-m</STRONG> Specify a mapping from a port type to a terminal.
See the section <STRONG>TERMINAL</STRONG> <STRONG>TYPE</STRONG> <STRONG>MAPPING</STRONG> for more infor-
mation.
- <STRONG>-Q</STRONG> Do not display any values for the erase, interrupt
+ <STRONG>-Q</STRONG> Do not display any values for the erase, interrupt
and line kill characters. Normally <STRONG>tset</STRONG> displays the
- values for control characters which differ from the
+ values for control characters which differ from the
system's default values.
- <STRONG>-q</STRONG> The terminal type is displayed to the standard out-
- put, and the terminal is not initialized in any way.
+ <STRONG>-q</STRONG> The terminal type is displayed to the standard out-
+ put, and the terminal is not initialized in any way.
The option "-" by itself is equivalent but archaic.
<STRONG>-r</STRONG> Print the terminal type to the standard error output.
- <STRONG>-s</STRONG> Print the sequence of shell commands to initialize
+ <STRONG>-s</STRONG> Print the sequence of shell commands to initialize
the environment variable <STRONG>TERM</STRONG> to the standard output.
See the section <STRONG>SETTING</STRONG> <STRONG>THE</STRONG> <STRONG>ENVIRONMENT</STRONG> for details.
<STRONG>-V</STRONG> reports the version of ncurses which was used in this
program, and exits.
- <STRONG>-w</STRONG> Resize the window to match the size deduced via
- <STRONG>setupterm</STRONG>. Normally this has no effect, unless
+ <STRONG>-w</STRONG> Resize the window to match the size deduced via
+ <STRONG><A HREF="curs_terminfo.3x.html">setupterm(3x)</A></STRONG>. Normally this has no effect, unless
<STRONG>setupterm</STRONG> is not able to detect the window size.
The arguments for the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG> options may either be
- entered as actual characters or by using the "hat" nota-
+ entered as actual characters or by using the "hat" nota-
tion, i.e., control-h may be specified as "^H" or "^h".
If neither <STRONG>-c</STRONG> or <STRONG>-w</STRONG> is given, both options are assumed.
</PRE><H2><a name="h2-SETTING-THE-ENVIRONMENT">SETTING THE ENVIRONMENT</a></H2><PRE>
- It is often desirable to enter the terminal type and
- information about the terminal's capabilities into the
+ It is often desirable to enter the terminal type and
+ information about the terminal's capabilities into the
shell's environment. This is done using the <STRONG>-s</STRONG> option.
When the <STRONG>-s</STRONG> option is specified, the commands to enter the
- information into the shell's environment are written to
- the standard output. If the <STRONG>SHELL</STRONG> environmental variable
- ends in "csh", the commands are for <STRONG>csh</STRONG>, otherwise, they
- are for <STRONG>sh</STRONG>. Note, the <STRONG>csh</STRONG> commands set and unset the
- shell variable <STRONG>noglob</STRONG>, leaving it unset. The following
- line in the <STRONG>.login</STRONG> or <STRONG>.profile</STRONG> files will initialize the
+ information into the shell's environment are written to
+ the standard output. If the <STRONG>SHELL</STRONG> environmental variable
+ ends in "csh", the commands are for <STRONG>csh</STRONG>, otherwise, they
+ are for <STRONG>sh</STRONG>. Note, the <STRONG>csh</STRONG> commands set and unset the
+ shell variable <STRONG>noglob</STRONG>, leaving it unset. The following
+ line in the <STRONG>.login</STRONG> or <STRONG>.profile</STRONG> files will initialize the
environment correctly:
eval `tset -s options ... `
</PRE><H2><a name="h2-TERMINAL-TYPE-MAPPING">TERMINAL TYPE MAPPING</a></H2><PRE>
When the terminal is not hardwired into the system (or the
current system information is incorrect) the terminal type
- derived from the <EM>/etc/ttys</EM> file or the <STRONG>TERM</STRONG> environmental
- variable is often something generic like <STRONG>network</STRONG>, <STRONG>dialup</STRONG>,
- or <STRONG>unknown</STRONG>. When <STRONG>tset</STRONG> is used in a startup script it is
- often desirable to provide information about the type of
+ derived from the <EM>/etc/ttys</EM> file or the <STRONG>TERM</STRONG> environmental
+ variable is often something generic like <STRONG>network</STRONG>, <STRONG>dialup</STRONG>,
+ or <STRONG>unknown</STRONG>. When <STRONG>tset</STRONG> is used in a startup script it is
+ often desirable to provide information about the type of
terminal used on such ports.
- The <STRONG>-m</STRONG> options maps from some set of conditions to a ter-
- minal type, that is, to tell <STRONG>tset</STRONG> "If I'm on this port at
- a particular speed, guess that I'm on that kind of termi-
+ The <STRONG>-m</STRONG> options maps from some set of conditions to a ter-
+ minal type, that is, to tell <STRONG>tset</STRONG> "If I'm on this port at
+ a particular speed, guess that I'm on that kind of termi-
nal".
The argument to the <STRONG>-m</STRONG> option consists of an optional port
type, an optional operator, an optional baud rate specifi-
- cation, an optional colon (":") character and a terminal
- type. The port type is a string (delimited by either the
+ cation, an optional colon (":") character and a terminal
+ type. The port type is a string (delimited by either the
operator or the colon character). The operator may be any
- combination of ">", "<", "@", and "!"; ">" means greater
- than, "<" means less than, "@" means equal to and "!"
+ combination of ">", "<", "@", and "!"; ">" means greater
+ than, "<" means less than, "@" means equal to and "!"
inverts the sense of the test. The baud rate is specified
as a number and is compared with the speed of the standard
- error output (which should be the control terminal). The
+ error output (which should be the control terminal). The
terminal type is a string.
If the terminal type is not specified on the command line,
- the <STRONG>-m</STRONG> mappings are applied to the terminal type. If the
- port type and baud rate match the mapping, the terminal
- type specified in the mapping replaces the current type.
- If more than one mapping is specified, the first applica-
+ the <STRONG>-m</STRONG> mappings are applied to the terminal type. If the
+ port type and baud rate match the mapping, the terminal
+ type specified in the mapping replaces the current type.
+ If more than one mapping is specified, the first applica-
ble mapping is used.
- For example, consider the following mapping:
+ For example, consider the following mapping:
<STRONG>dialup>9600:vt100</STRONG>. The port type is dialup , the operator
- is >, the baud rate specification is 9600, and the termi-
+ is >, the baud rate specification is 9600, and the termi-
nal type is vt100. The result of this mapping is to spec-
ify that if the terminal type is <STRONG>dialup</STRONG>, and the baud rate
- is greater than 9600 baud, a terminal type of <STRONG>vt100</STRONG> will
+ is greater than 9600 baud, a terminal type of <STRONG>vt100</STRONG> will
be used.
If no baud rate is specified, the terminal type will match
any baud rate. If no port type is specified, the terminal
- type will match any port type. For example, <STRONG>-m</STRONG>
+ type will match any port type. For example, <STRONG>-m</STRONG>
<STRONG>dialup:vt100</STRONG> <STRONG>-m</STRONG> <STRONG>:?xterm</STRONG> will cause any dialup port,
regardless of baud rate, to match the terminal type vt100,
- and any non-dialup port type to match the terminal type
- ?xterm. Note, because of the leading question mark, the
- user will be queried on a default port as to whether they
+ and any non-dialup port type to match the terminal type
+ ?xterm. Note, because of the leading question mark, the
+ user will be queried on a default port as to whether they
are actually using an xterm terminal.
- No whitespace characters are permitted in the <STRONG>-m</STRONG> option
- argument. Also, to avoid problems with meta-characters,
- it is suggested that the entire <STRONG>-m</STRONG> option argument be
- placed within single quote characters, and that <STRONG>csh</STRONG> users
- insert a backslash character ("\") before any exclamation
+ No whitespace characters are permitted in the <STRONG>-m</STRONG> option
+ argument. Also, to avoid problems with meta-characters,
+ it is suggested that the entire <STRONG>-m</STRONG> option argument be
+ placed within single quote characters, and that <STRONG>csh</STRONG> users
+ insert a backslash character ("\") before any exclamation
marks ("!").
</PRE><H2><a name="h2-HISTORY">HISTORY</a></H2><PRE>
- A <STRONG>reset</STRONG> command appeared in 2BSD (1979), written by Kurt
- Shoens.
-
- A separate <STRONG>tset</STRONG> command was provided in 2BSD by Eric All-
- man. While the oldest published source (from 1979) pro-
- vides both programs, Allman's comments in the 2BSD source
- code indicate that he began work in October 1977, continu-
- ing development over the next few years.
-
- In 1980, Eric Allman modified <STRONG>tset</STRONG> to provide a "reset"
- feature when the program was invoked as <STRONG>reset</STRONG>.
+ A <STRONG>reset</STRONG> command appeared in 2BSD (April 1979), written by
+ Kurt Shoens. This program set the <EM>erase</EM> and <EM>kill</EM> charac-
+ ters to <STRONG>^H</STRONG> (backspace) and <STRONG>@</STRONG> respectively. Mark Horton
+ improved that in 3BSD (October 1979), adding <EM>intr</EM>, <EM>quit</EM>,
+ <EM>start</EM>/<EM>stop</EM> and <EM>eof</EM> characters as well as changing the pro-
+ gram to avoid modifying any user settings.
+
+ Later in 4.1BSD (December 1980), Mark Horton added a call
+ to the <STRONG>tset</STRONG> program using the <STRONG>-I</STRONG> and <STRONG>-Q</STRONG> options, i.e.,
+ using that to improve the terminal modes. With those
+ options, that version of <STRONG>reset</STRONG> did not use the termcap
+ database.
+
+ A separate <STRONG>tset</STRONG> command was provided in 2BSD by Eric All-
+ man. While the oldest published source (from 1979) pro-
+ vides both <STRONG>tset</STRONG> and <STRONG>reset</STRONG>, Allman's comments in the 2BSD
+ source code indicate that he began work in October 1977,
+ continuing development over the next few years.
+
+ In September 1980, Eric Allman modified <STRONG>tset</STRONG>, adding the
+ code from the existing "reset" feature when <STRONG>tset</STRONG> was
+ invoked as <STRONG>reset</STRONG>. Rather than simply copying the existing
+ program, in this merged version, <STRONG>tset</STRONG> used the termcap
+ database to do additional (re)initialization of the termi-
+ nal. This version appeared in 4.1cBSD, late in 1982.
+
+ Other developers (e.g., Keith Bostic and Jim Bloom) con-
+ tinued to modify <STRONG>tset</STRONG> until 4.4BSD was released in 1993.
The <STRONG>ncurses</STRONG> implementation was lightly adapted from the
4.4BSD sources for a terminfo environment by Eric S. Ray-
<STRONG>csh(1)</STRONG>, <STRONG>sh(1)</STRONG>, <STRONG>stty(1)</STRONG>, <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>, <STRONG>tty(4)</STRONG>,
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>, <STRONG>ttys(5)</STRONG>, <STRONG>environ(7)</STRONG>
- This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20161015).
+ This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20170422).