#! /bin/sh
-# From configure.in Revision: 1.552 .
+# From configure.in Revision: 1.553 .
# Guess values for system-dependent variables and create Makefiles.
# Generated by Autoconf 2.52.20120811.
#
else
cf_with_ada=yes
fi;
-if test x"$cf_with_ada" = xyes
+if test "x$cf_with_ada" = xyes
then
cf_PROG_CC="gnatgcc gcc cc"
else
else
cf_cv_mixedcase=$enable_mixedcase
- if test "$enable_mixedcase" = "yes" ; then
+ if test "x$enable_mixedcase" = "xyes" ; then
cat >>confdefs.h <<\EOF
#define MIXEDCASE_FILENAMES 1
EOF
# Check whether --with-install-prefix or --without-install-prefix was given.
if test "${with_install_prefix+set}" = set; then
withval="$with_install_prefix"
- case "$withval" in #(vi
- yes|no) #(vi
+ case "x$withval" in #(vi
+ xyes|xno) #(vi
;;
*) DESTDIR="$withval"
;;
fi;
echo "$as_me:4643: result: $with_shared" >&5
echo "${ECHO_T}$with_shared" >&6
-test "$with_shared" = "yes" && cf_list_models="$cf_list_models shared"
+test "x$with_shared" = "xyes" && cf_list_models="$cf_list_models shared"
echo "$as_me:4647: checking if you want to build static libraries" >&5
echo $ECHO_N "checking if you want to build static libraries... $ECHO_C" >&6
fi;
echo "$as_me:4657: result: $with_normal" >&5
echo "${ECHO_T}$with_normal" >&6
-test "$with_normal" = "yes" && cf_list_models="$cf_list_models normal"
+test "x$with_normal" = "xyes" && cf_list_models="$cf_list_models normal"
echo "$as_me:4661: checking if you want to build debug libraries" >&5
echo $ECHO_N "checking if you want to build debug libraries... $ECHO_C" >&6
fi;
echo "$as_me:4671: result: $with_debug" >&5
echo "${ECHO_T}$with_debug" >&6
-test "$with_debug" = "yes" && cf_list_models="$cf_list_models debug"
+test "x$with_debug" = "xyes" && cf_list_models="$cf_list_models debug"
echo "$as_me:4675: checking if you want to build profiling libraries" >&5
echo $ECHO_N "checking if you want to build profiling libraries... $ECHO_C" >&6
fi;
echo "$as_me:4685: result: $with_profile" >&5
echo "${ECHO_T}$with_profile" >&6
-test "$with_profile" = "yes" && cf_list_models="$cf_list_models profile"
+test "x$with_profile" = "xyes" && cf_list_models="$cf_list_models profile"
fi
fi;
echo "$as_me:4933: result: $with_dlsym" >&5
echo "${ECHO_T}$with_dlsym" >&6
- if test "$with_dlsym" = yes ; then
+ if test "x$with_dlsym" = xyes ; then
cf_have_dlsym=no
echo "$as_me:4938: checking for dlsym" >&5
{ (exit 1); exit 1; }; }
fi
- if test "$with_gpm" != yes ; then
+ if test "x$with_gpm" != xyes ; then
test -n "$verbose" && echo " assuming soname for gpm is $with_gpm" 1>&6
echo "${as_me:-configure}:5118: testing assuming soname for gpm is $with_gpm ..." 1>&5
if test X"$CC_G_OPT" = X"" ; then
CC_G_OPT='-g'
- test -n "$GCC" && test "${ac_cv_prog_cc_g}" != yes && CC_G_OPT=''
+ test -n "$GCC" && test "x${ac_cv_prog_cc_g}" != xyes && CC_G_OPT=''
fi
if test X"$CXX_G_OPT" = X"" ; then
CXX_G_OPT='-g'
- test -n "$GXX" && test "${ac_cv_prog_cxx_g}" != yes && CXX_G_OPT=''
+ test -n "$GXX" && test "x${ac_cv_prog_cxx_g}" != xyes && CXX_G_OPT=''
fi
echo "$as_me:5358: checking for default loader flags" >&5
fi;
echo "$as_me:6497: result: $with_big_core" >&5
echo "${ECHO_T}$with_big_core" >&6
-test "$with_big_core" = "yes" && cat >>confdefs.h <<\EOF
+test "x$with_big_core" = "xyes" && cat >>confdefs.h <<\EOF
#define HAVE_BIG_CORE 1
EOF
echo "${ECHO_T}$with_big_strings" >&6
USE_BIG_STRINGS=0
-test "$with_big_strings" = "yes" && USE_BIG_STRINGS=1
+test "x$with_big_strings" = "xyes" && USE_BIG_STRINGS=1
### use option --enable-termcap to compile in the termcap fallback support
echo "$as_me:6537: checking if you want termcap-fallback support" >&5
echo "$as_me:6547: result: $with_termcap" >&5
echo "${ECHO_T}$with_termcap" >&6
-if test "$with_termcap" != "yes" ; then
+if test "x$with_termcap" != "xyes" ; then
if test "$use_database" = no ; then
if test -z "$with_fallback" ; then
{ { echo "$as_me:6553: error: You have disabled the database w/o specifying fallbacks" >&5
fi;
echo "$as_me:6644: result: $with_getcap" >&5
echo "${ECHO_T}$with_getcap" >&6
-test "$with_getcap" = "yes" && cat >>confdefs.h <<\EOF
+test "x$with_getcap" = "xyes" && cat >>confdefs.h <<\EOF
#define USE_GETCAP 1
EOF
fi;
echo "$as_me:6660: result: $with_getcap_cache" >&5
echo "${ECHO_T}$with_getcap_cache" >&6
-test "$with_getcap_cache" = "yes" && cat >>confdefs.h <<\EOF
+test "x$with_getcap_cache" = "xyes" && cat >>confdefs.h <<\EOF
#define USE_GETCAP_CACHE 1
EOF
fi;
echo "$as_me:6679: result: $with_home_terminfo" >&5
echo "${ECHO_T}$with_home_terminfo" >&6
-test "$with_home_terminfo" = "yes" && cat >>confdefs.h <<\EOF
+test "x$with_home_terminfo" = "xyes" && cat >>confdefs.h <<\EOF
#define USE_HOME_TERMINFO 1
EOF
fi;
echo "$as_me:6695: result: $with_root_environ" >&5
echo "${ECHO_T}$with_root_environ" >&6
-test "$with_root_environ" = yes && cat >>confdefs.h <<\EOF
+test "x$with_root_environ" = xyes && cat >>confdefs.h <<\EOF
#define USE_ROOT_ENVIRON 1
EOF
# soft links (symbolic links) are useful for some systems where hard links do
# not work, or to make it simpler to copy terminfo trees around.
-if test "$ac_cv_func_symlink" = yes ; then
+if test "x$ac_cv_func_symlink" = xyes ; then
echo "$as_me:6936: checking if tic should use symbolic links" >&5
echo $ECHO_N "checking if tic should use symbolic links... $ECHO_C" >&6
if test "$with_symlinks" = no ; then
echo "$as_me:6953: checking if tic should use hard links" >&5
echo $ECHO_N "checking if tic should use hard links... $ECHO_C" >&6
- if test "$ac_cv_func_link" = yes ; then
+ if test "x$ac_cv_func_link" = xyes ; then
with_links=yes
else
with_links=no
echo "${ECHO_T}$with_links" >&6
fi
-test "$with_links" = yes && cat >>confdefs.h <<\EOF
+test "x$with_links" = xyes && cat >>confdefs.h <<\EOF
#define USE_LINKS 1
EOF
-test "$with_symlinks" = yes && cat >>confdefs.h <<\EOF
+test "x$with_symlinks" = xyes && cat >>confdefs.h <<\EOF
#define USE_SYMLINKS 1
EOF
echo "${ECHO_T}$with_broken_linker" >&6
BROKEN_LINKER=0
-if test "$with_broken_linker" = yes ; then
+if test "x$with_broken_linker" = xyes ; then
cat >>confdefs.h <<\EOF
#define BROKEN_LINKER 1
EOF
fi;
echo "$as_me:7020: result: $with_bsdpad" >&5
echo "${ECHO_T}$with_bsdpad" >&6
-test "$with_bsdpad" = yes && cat >>confdefs.h <<\EOF
+test "x$with_bsdpad" = xyes && cat >>confdefs.h <<\EOF
#define BSD_TPUTS 1
EOF
fi;
echo "$as_me:8410: result: $with_widec" >&5
echo "${ECHO_T}$with_widec" >&6
-if test "$with_widec" = yes ; then
+if test "x$with_widec" = xyes ; then
LIB_SUFFIX="w${LIB_SUFFIX}"
cat >>confdefs.h <<\EOF
#define USE_WIDEC_SUPPORT 1
fi
done
- if test "$ac_cv_func_putwc" != yes ; then
+ if test "x$ac_cv_func_putwc" != xyes ; then
echo "$as_me:8635: checking for multibyte character support" >&5
echo $ECHO_N "checking for multibyte character support... $ECHO_C" >&6
echo "$as_me:9547: result: $with_lp64" >&5
echo "${ECHO_T}$with_lp64" >&6
-if test "$with_lp64" = yes ; then
+if test "x$with_lp64" = xyes ; then
cf_cv_enable_lp64=1
else
cf_cv_enable_lp64=0
echo "$as_me:10050: result: $with_tparm_varargs" >&5
echo "${ECHO_T}$with_tparm_varargs" >&6
NCURSES_TPARM_VARARGS=0
-test "$with_tparm_varargs" = yes && NCURSES_TPARM_VARARGS=1
+test "x$with_tparm_varargs" = xyes && NCURSES_TPARM_VARARGS=1
### use option --disable-tic-depends to make libtic not explicitly depend on ncurses/ncursesw
if test "$with_ticlib" != no ; then
fi;
echo "$as_me:10182: result: $with_rcs_ids" >&5
echo "${ECHO_T}$with_rcs_ids" >&6
-test "$with_rcs_ids" = yes && cat >>confdefs.h <<\EOF
+test "x$with_rcs_ids" = xyes && cat >>confdefs.h <<\EOF
#define USE_RCS_IDS 1
EOF
fi;
echo "$as_me:10732: result: $with_ext_funcs" >&5
echo "${ECHO_T}$with_ext_funcs" >&6
-if test "$with_ext_funcs" = yes ; then
+if test "x$with_ext_funcs" = xyes ; then
NCURSES_EXT_FUNCS=1
cat >>confdefs.h <<\EOF
#define HAVE_ASSUME_DEFAULT_COLORS 1
fi;
echo "$as_me:10796: result: $with_sp_funcs" >&5
echo "${ECHO_T}$with_sp_funcs" >&6
-if test "$with_sp_funcs" = yes ; then
+if test "x$with_sp_funcs" = xyes ; then
NCURSES_SP_FUNCS=1
cat >>confdefs.h <<\EOF
#define NCURSES_SP_FUNCS 1
fi;
echo "$as_me:10820: result: $with_term_driver" >&5
echo "${ECHO_T}$with_term_driver" >&6
-if test "$with_term_driver" = yes ; then
+if test "x$with_term_driver" = xyes ; then
cat >>confdefs.h <<\EOF
#define USE_TERM_DRIVER 1
EOF
- if test "$with_sp_funcs" != yes ; then
+ if test "x$with_sp_funcs" != xyes ; then
{ { echo "$as_me:10828: error: The term-driver option relies upon sp-funcs" >&5
echo "$as_me: error: The term-driver option relies upon sp-funcs" >&2;}
{ (exit 1); exit 1; }; }
echo "$as_me:10845: result: $with_ext_const" >&5
echo "${ECHO_T}$with_ext_const" >&6
NCURSES_CONST='/*nothing*/'
-if test "$with_ext_const" = yes ; then
+if test "x$with_ext_const" = xyes ; then
NCURSES_CONST=const
fi
echo "$as_me:10863: result: $with_ext_colors" >&5
echo "${ECHO_T}$with_ext_colors" >&6
NCURSES_EXT_COLORS=0
-if test "$with_ext_colors" = yes ; then
- if test "$with_widec" != yes ; then
+if test "x$with_ext_colors" = xyes ; then
+ if test "x$with_widec" != xyes ; then
{ { echo "$as_me:10868: error: This option applies only to wide-character library" >&5
echo "$as_me: error: This option applies only to wide-character library" >&2;}
{ (exit 1); exit 1; }; }
echo "$as_me:10904: result: $with_ext_mouse" >&5
echo "${ECHO_T}$with_ext_mouse" >&6
NCURSES_MOUSE_VERSION=1
-if test "$with_ext_mouse" = yes ; then
+if test "x$with_ext_mouse" = xyes ; then
NCURSES_MOUSE_VERSION=2
if test "${with_abi_version+set}" != set; then
fi;
echo "$as_me:10933: result: $with_no_padding" >&5
echo "${ECHO_T}$with_no_padding" >&6
-test "$with_no_padding" = yes && cat >>confdefs.h <<\EOF
+test "x$with_no_padding" = xyes && cat >>confdefs.h <<\EOF
#define NCURSES_NO_PADDING 1
EOF
fi;
echo "$as_me:11376: result: $with_signed_char" >&5
echo "${ECHO_T}$with_signed_char" >&6
-test "$with_signed_char" != yes && NCURSES_SBOOL="char"
+test "x$with_signed_char" != xyes && NCURSES_SBOOL="char"
### use option --enable-sigwinch to turn on use of SIGWINCH logic
echo "$as_me:11381: checking if you want SIGWINCH handler" >&5
fi;
echo "$as_me:11391: result: $with_sigwinch" >&5
echo "${ECHO_T}$with_sigwinch" >&6
-test "$with_sigwinch" = yes && cat >>confdefs.h <<\EOF
+test "x$with_sigwinch" = xyes && cat >>confdefs.h <<\EOF
#define USE_SIGWINCH 1
EOF
echo "$as_me:11408: result: $with_tcap_names" >&5
echo "${ECHO_T}$with_tcap_names" >&6
NCURSES_XNAMES=0
-test "$with_tcap_names" = yes && NCURSES_XNAMES=1
+test "x$with_tcap_names" = xyes && NCURSES_XNAMES=1
###############################################################################
# These options are relatively safe to experiment with.
fi;
echo "$as_me:11440: result: $enable_hard_tabs" >&5
echo "${ECHO_T}$enable_hard_tabs" >&6
-test "$enable_hard_tabs" = yes && cat >>confdefs.h <<\EOF
+test "x$enable_hard_tabs" = xyes && cat >>confdefs.h <<\EOF
#define USE_HARD_TABS 1
EOF
fi;
echo "$as_me:11457: result: $enable_xmc_glitch" >&5
echo "${ECHO_T}$enable_xmc_glitch" >&6
-test "$enable_xmc_glitch" = yes && cat >>confdefs.h <<\EOF
+test "x$enable_xmc_glitch" = xyes && cat >>confdefs.h <<\EOF
#define USE_XMC_SUPPORT 1
EOF
fi;
echo "$as_me:11476: result: $with_assumed_color" >&5
echo "${ECHO_T}$with_assumed_color" >&6
-test "$with_assumed_color" = yes && cat >>confdefs.h <<\EOF
+test "x$with_assumed_color" = xyes && cat >>confdefs.h <<\EOF
#define USE_ASSUMED_COLOR 1
EOF
fi;
echo "$as_me:11493: result: $with_hashmap" >&5
echo "${ECHO_T}$with_hashmap" >&6
-test "$with_hashmap" = yes && cat >>confdefs.h <<\EOF
+test "x$with_hashmap" = xyes && cat >>confdefs.h <<\EOF
#define USE_HASHMAP 1
EOF
fi;
echo "$as_me:11510: result: $with_colorfgbg" >&5
echo "${ECHO_T}$with_colorfgbg" >&6
-test "$with_colorfgbg" = yes && cat >>confdefs.h <<\EOF
+test "x$with_colorfgbg" = xyes && cat >>confdefs.h <<\EOF
#define USE_COLORFGBG 1
EOF
echo "${ECHO_T}$with_exp_interop" >&6
NCURSES_INTEROP_FUNCS=0
-test "$with_exp_interop" = yes && NCURSES_INTEROP_FUNCS=1
+test "x$with_exp_interop" = xyes && NCURSES_INTEROP_FUNCS=1
# This is still experimental (20080329), but should ultimately be moved to
# the script-block --with-normal, etc.
fi;
echo "$as_me:11728: result: $use_pthreads_eintr" >&5
echo "${ECHO_T}$use_pthreads_eintr" >&6
- if test $use_pthreads_eintr = yes ; then
+ if test "x$use_pthreads_eintr" = xyes ; then
cat >>confdefs.h <<\EOF
#define USE_PTHREADS_EINTR 1
EOF
fi;
echo "$as_me:11748: result: $use_weak_symbols" >&5
echo "${ECHO_T}$use_weak_symbols" >&6
- if test "$use_weak_symbols" = yes ; then
+ if test "x$use_weak_symbols" = xyes ; then
echo "$as_me:11752: checking if $CC supports weak symbols" >&5
echo $ECHO_N "checking if $CC supports weak symbols... $ECHO_C" >&6
cf_cv_weak_symbols=no
fi
- if test $cf_cv_weak_symbols = yes ; then
+ if test "x$cf_cv_weak_symbols" = xyes ; then
cat >>confdefs.h <<\EOF
#define USE_WEAK_SYMBOLS 1
EOF
fi
PTHREAD=
-if test "$with_pthread" = "yes" ; then
+if test "x$with_pthread" = "xyes" ; then
cat >>confdefs.h <<\EOF
#define USE_PTHREADS 1
EOF
enable_reentrant=yes
- if test $cf_cv_weak_symbols = yes ; then
+ if test "x$cf_cv_weak_symbols" = xyes ; then
PTHREAD=-lpthread
fi
fi
fi;
echo "$as_me:11846: result: $with_reentrant" >&5
echo "${ECHO_T}$with_reentrant" >&6
-if test "$with_reentrant" = yes ; then
+if test "x$with_reentrant" = xyes ; then
cf_cv_enable_reentrant=1
cf_cv_enable_opaque="NCURSES_INTERNALS"
NCURSES_OPAQUE=1
NCURSES_SIZE_T=int
- if test $cf_cv_weak_symbols = yes ; then
+ if test "x$cf_cv_weak_symbols" = xyes ; then
# remove pthread library from $LIBS
LIBS=`echo "$LIBS" | sed -e 's/-lpthread[ ]//g' -e 's/-lpthread$//'`
fi;
echo "$as_me:11917: result: $with_safe_sprintf" >&5
echo "${ECHO_T}$with_safe_sprintf" >&6
-test "$with_safe_sprintf" = yes && cat >>confdefs.h <<\EOF
+test "x$with_safe_sprintf" = xyes && cat >>confdefs.h <<\EOF
#define USE_SAFE_SPRINTF 1
EOF
fi;
echo "$as_me:11936: result: $with_scroll_hints" >&5
echo "${ECHO_T}$with_scroll_hints" >&6
-test "$with_scroll_hints" = yes && cat >>confdefs.h <<\EOF
+test "x$with_scroll_hints" = xyes && cat >>confdefs.h <<\EOF
#define USE_SCROLL_HINTS 1
EOF
fi;
echo "$as_me:11954: result: $with_wgetch_events" >&5
echo "${ECHO_T}$with_wgetch_events" >&6
-test "$with_wgetch_events" = yes && cat >>confdefs.h <<\EOF
+test "x$with_wgetch_events" = xyes && cat >>confdefs.h <<\EOF
#define NCURSES_WGETCH_EVENTS 1
EOF
echo "$as_me:11998: result: $enableval" >&5
echo "${ECHO_T}$enableval" >&6
-if test "$enable_echo" = yes; then
+if test "x$enable_echo" = xyes; then
ECHO_LINK=
else
ECHO_LINK='@ echo linking $@ ... ;'
fi
rm -rf conftest*
- if test "$cf_with_cxx" = yes ; then
+ if test "x$cf_with_cxx" = xyes ; then
INTEL_CPLUSPLUS=no
# Check whether --enable-expanded or --disable-expanded was given.
if test "${enable_expanded+set}" = set; then
enableval="$enable_expanded"
- test "$enableval" = yes && cat >>confdefs.h <<\EOF
+ test "x$enableval" = xyes && cat >>confdefs.h <<\EOF
#define NCURSES_EXPANDED 1
EOF
echo "$as_me:13280: result: $cf_with_trace" >&5
echo "${ECHO_T}$cf_with_trace" >&6
-if test "$cf_with_trace" = yes ; then
+if test "x$cf_with_trace" = xyes ; then
LIB_TRACING=all
ADA_TRACE=TRUE
# check for ISC (this may also define _POSIX_SOURCE)
# Note: even non-Posix ISC needs <sys/bsdtypes.h> to declare fd_set
-if test "$ISC" = yes ; then
+if test "x$ISC" = xyes ; then
echo "$as_me:14451: checking for main in -lcposix" >&5
echo $ECHO_N "checking for main in -lcposix... $ECHO_C" >&6
fi
done
-if test "$with_getcap" = "yes" ; then
+if test "x$with_getcap" = "xyes" ; then
echo "$as_me:15499: checking for terminal-capability database functions" >&5
echo $ECHO_N "checking for terminal-capability database functions... $ECHO_C" >&6
HAVE_VSSCANF=0
fi
-if test "$cross_compiling" = yes ; then
+if test "x$cross_compiling" = xyes ; then
{ echo "$as_me:16341: WARNING: cross compiling: assume setvbuf params not reversed" >&5
echo "$as_me: WARNING: cross compiling: assume setvbuf params not reversed" >&2;}
else
#define USE_XTERM_PTY 1
EOF
- if test "$cf_cv_lib_util" = yes ; then
+ if test "x$cf_cv_lib_util" = xyes ; then
TEST_LIBS="-lutil $TEST_LIBS"
fi
fi
fi
fi
- if test "$cf_cv_prog_gnat_correct" = yes; then
+ if test "x$cf_cv_prog_gnat_correct" = xyes; then
ADAFLAGS="$ADAFLAGS -gnatpn"
echo $ECHO_N "checking for library subsets... $ECHO_C" >&6
LIB_SUBSETS=
-if test "$cf_with_progs" = yes || test "$with_ticlib" != no || test "$with_termcap" != no; then
+if test "x$cf_with_progs" = xyes || test "$with_ticlib" != no || test "$with_termcap" != no; then
LIB_SUBSETS="${LIB_SUBSETS}ticlib"
if test "$with_ticlib" != no ; then
LIB_SUBSETS="${LIB_SUBSETS} "
fi
LIB_SUBSETS="${LIB_SUBSETS}termlib"
-test "$with_ext_funcs" = yes && LIB_SUBSETS="${LIB_SUBSETS}+ext_tinfo"
+test "x$with_ext_funcs" = xyes && LIB_SUBSETS="${LIB_SUBSETS}+ext_tinfo"
if test "$with_termlib" != no ; then
LIB_SUBSETS="${LIB_SUBSETS} "
esac
fi
-test "$with_widec" = yes && LIB_SUBSETS="${LIB_SUBSETS}+widechar"
-test "$with_ext_funcs" = yes && LIB_SUBSETS="${LIB_SUBSETS}+ext_funcs"
+test "x$with_widec" = xyes && LIB_SUBSETS="${LIB_SUBSETS}+widechar"
+test "x$with_ext_funcs" = xyes && LIB_SUBSETS="${LIB_SUBSETS}+ext_funcs"
echo "$as_me:19805: result: $LIB_SUBSETS" >&5
echo "${ECHO_T}$LIB_SUBSETS" >&6
echo "${ECHO_T}$DFT_OBJ_SUBDIR" >&6
# libtool thinks it can make c++ shared libraries (perhaps only g++)
-if test "$cf_with_cxx" = yes ; then
+if test "x$cf_with_cxx" = xyes ; then
echo "$as_me:19934: checking c++ library-dependency suffix" >&5
echo $ECHO_N "checking c++ library-dependency suffix... $ECHO_C" >&6
if test "$with_libtool" != "no"; then
fi
# do not want -ldl in build except as needed for -lncurses dependency
-if test "$with_dlsym" = yes ; then
+if test "x$with_dlsym" = xyes ; then
if test $DFT_LWR_MODEL = shared || \
test $DFT_LWR_MODEL = libtool ; then
# TICS_LIST and TINFO_LIST are needed to build libtic.so and libterm.so, but
# do not need libdl
TICS_LIST=
-if test "$with_dlsym" = yes ; then
+if test "x$with_dlsym" = xyes ; then
# remove dl library from $SHLIB_LIST
TINFO_LIST=`echo "$SHLIB_LIST" | sed -e 's/-ldl[ ]//g' -e 's/-ldl$//'`
if test "$with_ticlib" != no ; then
- if test "$with_ticlib" != yes ; then
+ if test "x$with_ticlib" != xyes ; then
TICS_NAME=$with_ticlib
TICS_ARG_SUFFIX="${with_ticlib}`echo ${DFT_ARG_SUFFIX}|sed -e "s/^${LIB_SUFFIX}//"`"
TICS_DEP_SUFFIX="${with_ticlib}`echo ${DFT_DEP_SUFFIX}|sed -e "s/^${LIB_SUFFIX}//"`"
if test "$with_termlib" != no ; then
- if test "$with_termlib" != yes ; then
+ if test "x$with_termlib" != xyes ; then
TINFO_NAME=$with_termlib
TINFO_SUFFIX="`echo ${DFT_LIB_SUFFIX}|sed -e "s/^${LIB_SUFFIX}//"`"
TINFO_ARG_SUFFIX="${with_termlib}`echo ${DFT_ARG_SUFFIX}|sed -e "s/^${LIB_SUFFIX}//"`"
TINFO_NAME=${LIB_NAME}
TINFO_SUFFIX=${DFT_LIB_SUFFIX}
TINFO_ARG_SUFFIX=${LIB_NAME}${DFT_ARG_SUFFIX}
- if test "$with_tic_depends" = yes ; then
+ if test "x$with_tic_depends" = xyes ; then
TICS_LIST="$SHLIB_LIST -l${LIB_NAME}${DFT_ARG_SUFFIX}"
else
TICS_LIST="$SHLIB_LIST"
esac
fi
-if test "$with_dlsym" = yes ; then
+if test "x$with_dlsym" = xyes ; then
# remove dl library from $TICS_LIST
TICS_LIST=`echo "$TICS_LIST" | sed -e 's/-ldl[ ]//g' -e 's/-ldl$//'`
### Define substitutions for header files to avoid name-pollution
-if test "$cf_cv_have_tcgetattr" = yes ; then
+if test "x$cf_cv_have_tcgetattr" = xyes ; then
HAVE_TCGETATTR=1
else
HAVE_TCGETATTR=0
fi
-if test "$ac_cv_header_termio_h" = yes ; then
+if test "x$ac_cv_header_termio_h" = xyes ; then
HAVE_TERMIO_H=1
else
HAVE_TERMIO_H=0
fi
-if test "$ac_cv_header_termios_h" = yes ; then
+if test "x$ac_cv_header_termios_h" = xyes ; then
HAVE_TERMIOS_H=1
else
HAVE_TERMIOS_H=0
fi
################################################################################
-test "$use_database" = yes && \
+test "x$use_database" = xyes && \
SUB_MAKEFILES="$SUB_MAKEFILES misc/run_tic.sh:misc/run_tic.in"
SUB_MAKEFILES="$SUB_MAKEFILES misc/ncurses-config:misc/ncurses-config.in"
SUB_MAKEFILES="$SUB_MAKEFILES man/ncurses${DFT_ARG_SUFFIX}${cf_cv_abi_version}-config.1:man/MKncu_config.in"
-if test x"$enable_pc_files" = xyes ; then \
+if test "x$enable_pc_files" = xyes ; then \
SUB_MAKEFILES="$SUB_MAKEFILES misc/gen-pkgconfig:misc/gen-pkgconfig.in"
MAKE_PC_FILES=
else